aboutsummaryrefslogtreecommitdiffstats
path: root/fs/cifs (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-12-23cifs: Optimize readdir on reparse pointsPaulo Alcantara (SUSE)2-9/+55
When listing a directory with thounsands of files and most of them are reparse points, we simply marked all those dentries for revalidation and then sending additional (compounded) create/getinfo/close requests for each of them. Instead, upon receiving a response from an SMB2_QUERY_DIRECTORY (FileIdFullDirectoryInformation) command, the directory entries that have a file attribute of FILE_ATTRIBUTE_REPARSE_POINT will contain an EaSize field with a reparse tag in it, so we parse it and mark the dentry for revalidation only if it is a DFS or a symlink. Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-12-23cifs: Adjust indentation in smb2_open_fileNathan Chancellor1-1/+1
Clang warns: ../fs/cifs/smb2file.c:70:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] if (oparms->tcon->use_resilient) { ^ ../fs/cifs/smb2file.c:66:2: note: previous statement is here if (rc) ^ 1 warning generated. This warning occurs because there is a space after the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Fixes: 592fafe644bf ("Add resilienthandles mount parm") Link: https://github.com/ClangBuiltLinux/linux/issues/826 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-12-13CIFS: Close cached root handle only if it has a leasePavel Shilovsky5-4/+25
SMB2_tdis() checks if a root handle is valid in order to decide whether it needs to close the handle or not. However if another thread has reference for the handle, it may end up with putting the reference twice. The extra reference that we want to put during the tree disconnect is the reference that has a directory lease. So, track the fact that we have a directory lease and close the handle only in that case. Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-12-13SMB3: Fix crash in SMB2_open_init due to uninitialized field in compounding pathSteve French1-0/+1
Ran into an intermittent crash in SMB2_open_init+0x2f6/0x970 due to oparms.cifs_sb not being initialized when called from: smb2_compound_op+0x45d/0x1690 Zero the whole oparms struct in the compounding path before setting up the oparms so we don't risk any uninitialized fields. Fixes: fdef665ba44a ("smb3: fix mode passed in on create for modetosid mount option") Signed-off-by: Steve French <stfrench@microsoft.com> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-12-09smb3: fix refcount underflow warning on unmount when no directory leasesSteve French1-1/+2
Fix refcount underflow warning when unmounting to servers which didn't grant directory leases. [ 301.680095] refcount_t: underflow; use-after-free. [ 301.680192] WARNING: CPU: 1 PID: 3569 at lib/refcount.c:28 refcount_warn_saturate+0xb4/0xf3 ... [ 301.682139] Call Trace: [ 301.682240] close_shroot+0x97/0xda [cifs] [ 301.682351] SMB2_tdis+0x7c/0x176 [cifs] [ 301.682456] ? _get_xid+0x58/0x91 [cifs] [ 301.682563] cifs_put_tcon.part.0+0x99/0x202 [cifs] [ 301.682637] ? ida_free+0x99/0x10a [ 301.682727] ? cifs_umount+0x3d/0x9d [cifs] [ 301.682829] cifs_put_tlink+0x3a/0x50 [cifs] [ 301.682929] cifs_umount+0x44/0x9d [cifs] Fixes: 72e73c78c446 ("cifs: close the shared root handle on tree disconnect") Signed-off-by: Steve French <stfrench@microsoft.com> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Reported-and-tested-by: Arthur Marsh <arthur.marsh@internode.on.net>
2019-12-08Merge tag '5.5-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds13-72/+265
Pull cifs fixes from Steve French: "Nine cifs/smb3 fixes: - one fix for stable (oops during oplock break) - two timestamp fixes including important one for updating mtime at close to avoid stale metadata caching issue on dirty files (also improves perf by using SMB2_CLOSE_FLAG_POSTQUERY_ATTRIB over the wire) - two fixes for "modefromsid" mount option for file create (now allows mode bits to be set more atomically and accurately on create by adding "sd_context" on create when modefromsid specified on mount) - two fixes for multichannel found in testing this week against different servers - two small cleanup patches" * tag '5.5-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: smb3: improve check for when we send the security descriptor context on create smb3: fix mode passed in on create for modetosid mount option cifs: fix possible uninitialized access and race on iface_list cifs: Fix lookup of SMB connections on multichannel smb3: query attributes on file close smb3: remove unused flag passed into close functions cifs: remove redundant assignment to pointer pneg_ctxt fs: cifs: Fix atime update check vs mtime CIFS: Fix NULL-pointer dereference in smb2_push_mandatory_locks
2019-12-07smb3: improve check for when we send the security descriptor context on createSteve French1-0/+2
We had cases in the previous patch where we were sending the security descriptor context on SMB3 open (file create) in cases when we hadn't mounted with with "modefromsid" mount option. Add check for that mount flag before calling ad_sd_context in open init. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-12-06smb3: fix mode passed in on create for modetosid mount optionSteve French5-34/+122
When using the special SID to store the mode bits in an ACE (See http://technet.microsoft.com/en-us/library/hh509017(v=ws.10).aspx) which is enabled with mount parm "modefromsid" we were not passing in the mode via SMB3 create (although chmod was enabled). SMB3 create allows a security descriptor context to be passed in (which is more atomic and thus preferable to setting the mode bits after create via a setinfo). This patch enables setting the mode bits on create when using modefromsid mount option. In addition it fixes an endian error in the definition of the Control field flags in the SMB3 security descriptor. It also makes the ACE type of the special SID better match the documentation (and behavior of servers which use this to store mode bits in SMB3 ACLs). Signed-off-by: Steve French <stfrench@microsoft.com> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-12-06Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-6/+1
Pull vfs d_inode/d_flags memory ordering fixes from Al Viro: "Fallout from tree-wide audit for ->d_inode/->d_flags barriers use. Basically, the problem is that negative pinned dentries require careful treatment - unless ->d_lock is locked or parent is held at least shared, another thread can make them positive right under us. Most of the uses turned out to be safe - the main surprises as far as filesystems are concerned were - race in dget_parent() fastpath, that might end up with the caller observing the returned dentry _negative_, due to insufficient barriers. It is positive in memory, but we could end up seeing the wrong value of ->d_inode in CPU cache. Fixed. - manual checks that result of lookup_one_len_unlocked() is positive (and rejection of negatives). Again, insufficient barriers (we might end up with inconsistent observed values of ->d_inode and ->d_flags). Fixed by switching to a new primitive that does the checks itself and returns ERR_PTR(-ENOENT) instead of a negative dentry. That way we get rid of boilerplate converting negatives into ERR_PTR(-ENOENT) in the callers and have a single place to deal with the barrier-related mess - inside fs/namei.c rather than in every caller out there. The guts of pathname resolution *do* need to be careful - the race found by Ritesh is real, as well as several similar races. Fortunately, it turns out that we can take care of that with fairly local changes in there. The tree-wide audit had not been fun, and I hate the idea of repeating it. I think the right approach would be to annotate the places where we are _not_ guaranteed ->d_inode/->d_flags stability and have sparse catch regressions. But I'm still not sure what would be the least invasive way of doing that and it's clearly the next cycle fodder" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs/namei.c: fix missing barriers when checking positivity fix dget_parent() fastpath race new helper: lookup_positive_unlocked() fs/namei.c: pull positivity check into follow_managed()
2019-12-04cifs: fix possible uninitialized access and race on iface_listAurelien Aptel1-3/+26
iface[0] was accessed regardless of the count value and without locking. * check count before accessing any ifaces * make copy of iface list (it's a simple POD array) and use it without locking. Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
2019-12-04cifs: Fix lookup of SMB connections on multichannelPaulo Alcantara (SUSE)3-1/+9
With the addition of SMB session channels, we introduced new TCP server pointers that have no sessions or tcons associated with them. In this case, when we started looking for TCP connections, we might end up picking session channel rather than the master connection, hence failing to get either a session or a tcon. In order to fix that, this patch introduces a new "is_channel" field to TCP_Server_Info structure so we can skip session channels during lookup of connections. Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-12-03smb3: query attributes on file closeSteve French7-15/+97
Since timestamps on files on most servers can be updated at close, and since timestamps on our dentries default to one second we can have stale timestamps in some common cases (e.g. open, write, close, stat, wait one second, stat - will show different mtime for the first and second stat). The SMB2/SMB3 protocol allows querying timestamps at close so add the code to request timestamp and attr information (which is cheap for the server to provide) to be returned when a file is closed (it is not needed for the many paths that call SMB2_close that are from compounded query infos and close nor is it needed for some of the cases where a directory close immediately follows a directory open. Signed-off-by: Steve French <stfrench@microsoft.com> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-12-02smb3: remove unused flag passed into close functionsSteve French2-16/+5
close was relayered to allow passing in an async flag which is no longer needed in this path. Remove the unneeded parameter "flags" passed in on close. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2019-12-02cifs: remove redundant assignment to pointer pneg_ctxtColin Ian King1-1/+1
The pointer pneg_ctxt is being initialized with a value that is never read and it is being updated later with a new value. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-12-02fs: cifs: Fix atime update check vs mtimeDeepa Dinamani1-1/+1
According to the comment in the code and commit log, some apps expect atime >= mtime; but the introduced code results in atime==mtime. Fix the comparison to guard against atime<mtime. Fixes: 9b9c5bea0b96 ("cifs: do not return atime less than mtime") Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: stfrench@microsoft.com Cc: linux-cifs@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
2019-12-02CIFS: Fix NULL-pointer dereference in smb2_push_mandatory_locksPavel Shilovsky1-3/+4
Currently when the client creates a cifsFileInfo structure for a newly opened file, it allocates a list of byte-range locks with a pointer to the new cfile and attaches this list to the inode's lock list. The latter happens before initializing all other fields, e.g. cfile->tlink. Thus a partially initialized cifsFileInfo structure becomes available to other threads that walk through the inode's lock list. One example of such a thread may be an oplock break worker thread that tries to push all cached byte-range locks. This causes NULL-pointer dereference in smb2_push_mandatory_locks() when accessing cfile->tlink: [598428.945633] BUG: kernel NULL pointer dereference, address: 0000000000000038 ... [598428.945749] Workqueue: cifsoplockd cifs_oplock_break [cifs] [598428.945793] RIP: 0010:smb2_push_mandatory_locks+0xd6/0x5a0 [cifs] ... [598428.945834] Call Trace: [598428.945870] ? cifs_revalidate_mapping+0x45/0x90 [cifs] [598428.945901] cifs_oplock_break+0x13d/0x450 [cifs] [598428.945909] process_one_work+0x1db/0x380 [598428.945914] worker_thread+0x4d/0x400 [598428.945921] kthread+0x104/0x140 [598428.945925] ? process_one_work+0x380/0x380 [598428.945931] ? kthread_park+0x80/0x80 [598428.945937] ret_from_fork+0x35/0x40 Fix this by reordering initialization steps of the cifsFileInfo structure: initialize all the fields first and then add the new byte-range lock list to the inode's lock list. Cc: Stable <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-12-02Merge tag 'docs-5.5a' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull Documentation updates from Jonathan Corbet: "Here are the main documentation changes for 5.5: - Various kerneldoc script enhancements. - More RST conversions; those are slowing down as we run out of things to convert, but we're a ways from done still. - Dan's "maintainer profile entry" work landed at last. Now we just need to get maintainers to fill in the profiles... - A reworking of the parallel build setup to work better with a variety of systems (and to not take over huge systems entirely in particular). - The MAINTAINERS file is now converted to RST during the build. Hopefully nobody ever tries to print this thing, or they will need to load a lot of paper. - A script and documentation making it easy for maintainers to add Link: tags at commit time. Also included is the removal of a bunch of spurious CR characters" * tag 'docs-5.5a' of git://git.lwn.net/linux: (91 commits) docs: remove a bunch of stray CRs docs: fix up the maintainer profile document libnvdimm, MAINTAINERS: Maintainer Entry Profile Maintainer Handbook: Maintainer Entry Profile MAINTAINERS: Reclaim the P: tag for Maintainer Entry Profile docs, parallelism: Rearrange how jobserver reservations are made docs, parallelism: Do not leak blocking mode to other readers docs, parallelism: Fix failure path and add comment Documentation: Remove bootmem_debug from kernel-parameters.txt Documentation: security: core.rst: fix warnings Documentation/process/howto/kokr: Update for 4.x -> 5.x versioning Documentation/translation: Use Korean for Korean translation title docs/memory-barriers.txt: Remove remaining references to mmiowb() docs/memory-barriers.txt/kokr: Update I/O section to be clearer about CPU vs thread docs/memory-barriers.txt/kokr: Fix style, spacing and grammar in I/O section Documentation/kokr: Kill all references to mmiowb() docs/memory-barriers.txt/kokr: Rewrite "KERNEL I/O BARRIER EFFECTS" section docs: Add initial documentation for devfreq Documentation: Document how to get links with git am docs: Add request_irq() documentation ...
2019-11-27CIFS: fix a white space issue in cifs_get_inode_info()Dan Carpenter via samba-technical1-1/+2
We accidentally messed up the indenting on this if statement. Fixes: 16c696a6c300 ("CIFS: refactor cifs_get_inode_info()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25cifs: update internal module version numberSteve French1-1/+1
To 2.24 Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25cifs: Always update signing key of first channelPaulo Alcantara (SUSE)1-0/+4
Update signing key of first channel whenever generating the master sigining/encryption/decryption keys rather than only in cifs_mount(). This also fixes reconnect when re-establishing smb sessions to other servers. Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25cifs: Fix retrieval of DFS referrals in cifs_mount()Paulo Alcantara (SUSE)1-10/+22
Make sure that DFS referrals are sent to newly resolved root targets as in a multi tier DFS setup. Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Link: https://lkml.kernel.org/r/05aa2995-e85e-0ff4-d003-5bb08bd17a22@canonical.com Cc: stable@vger.kernel.org Tested-by: Matthew Ruffell <matthew.ruffell@canonical.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25cifs: Fix potential softlockups while refreshing DFS cachePaulo Alcantara (SUSE)1-12/+29
We used to skip reconnects on all SMB2_IOCTL commands due to SMB3+ FSCTL_VALIDATE_NEGOTIATE_INFO - which made sense since we're still establishing a SMB session. However, when refresh_cache_worker() calls smb2_get_dfs_refer() and we're under reconnect, SMB2_ioctl() will not be able to get a proper status error (e.g. -EHOSTDOWN in case we failed to reconnect) but an -EAGAIN from cifs_send_recv() thus looping forever in refresh_cache_worker(). Fixes: e99c63e4d86d ("SMB3: Fix deadlock in validate negotiate hits reconnect") Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Suggested-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25cifs: Fix lookup of root ses in DFS referral cachePaulo Alcantara (SUSE)1-2/+1
We don't care about module aliasing validation in cifs_compose_mount_options(..., is_smb3) when finding the root SMB session of an DFS namespace in order to refresh DFS referral cache. The following issue has been observed when mounting with '-t smb3' and then specifying 'vers=2.0': ... Nov 08 15:27:08 tw kernel: address conversion returned 0 for FS0.WIN.LOCAL Nov 08 15:27:08 tw kernel: [kworke] ==> dns_query((null),FS0.WIN.LOCAL,13,(null)) Nov 08 15:27:08 tw kernel: [kworke] call request_key(,FS0.WIN.LOCAL,) Nov 08 15:27:08 tw kernel: [kworke] ==> dns_resolver_cmp(FS0.WIN.LOCAL,FS0.WIN.LOCAL) Nov 08 15:27:08 tw kernel: [kworke] <== dns_resolver_cmp() = 1 Nov 08 15:27:08 tw kernel: [kworke] <== dns_query() = 13 Nov 08 15:27:08 tw kernel: fs/cifs/dns_resolve.c: dns_resolve_server_name_to_ip: resolved: FS0.WIN.LOCAL to 192.168.30.26 ===> Nov 08 15:27:08 tw kernel: CIFS VFS: vers=2.0 not permitted when mounting with smb3 Nov 08 15:27:08 tw kernel: fs/cifs/dfs_cache.c: CIFS VFS: leaving refresh_tcon (xid = 26) rc = -22 ... Fixes: 5072010ccf05 ("cifs: Fix DFS cache refresher for DFS links") Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25cifs: Fix use-after-free bug in cifs_reconnect()Paulo Alcantara (SUSE)1-11/+35
Ensure we grab an active reference in cifs superblock while doing failover to prevent automounts (DFS links) of expiring and then destroying the superblock pointer. This patch fixes the following KASAN report: [ 464.301462] BUG: KASAN: use-after-free in cifs_reconnect+0x6ab/0x1350 [ 464.303052] Read of size 8 at addr ffff888155e580d0 by task cifsd/1107 [ 464.304682] CPU: 3 PID: 1107 Comm: cifsd Not tainted 5.4.0-rc4+ #13 [ 464.305552] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58-rebuilt.opensuse.org 04/01/2014 [ 464.307146] Call Trace: [ 464.307875] dump_stack+0x5b/0x90 [ 464.308631] print_address_description.constprop.0+0x16/0x200 [ 464.309478] ? cifs_reconnect+0x6ab/0x1350 [ 464.310253] ? cifs_reconnect+0x6ab/0x1350 [ 464.311040] __kasan_report.cold+0x1a/0x41 [ 464.311811] ? cifs_reconnect+0x6ab/0x1350 [ 464.312563] kasan_report+0xe/0x20 [ 464.313300] cifs_reconnect+0x6ab/0x1350 [ 464.314062] ? extract_hostname.part.0+0x90/0x90 [ 464.314829] ? printk+0xad/0xde [ 464.315525] ? _raw_spin_lock+0x7c/0xd0 [ 464.316252] ? _raw_read_lock_irq+0x40/0x40 [ 464.316961] ? ___ratelimit+0xed/0x182 [ 464.317655] cifs_readv_from_socket+0x289/0x3b0 [ 464.318386] cifs_read_from_socket+0x98/0xd0 [ 464.319078] ? cifs_readv_from_socket+0x3b0/0x3b0 [ 464.319782] ? try_to_wake_up+0x43c/0xa90 [ 464.320463] ? cifs_small_buf_get+0x4b/0x60 [ 464.321173] ? allocate_buffers+0x98/0x1a0 [ 464.321856] cifs_demultiplex_thread+0x218/0x14a0 [ 464.322558] ? cifs_handle_standard+0x270/0x270 [ 464.323237] ? __switch_to_asm+0x40/0x70 [ 464.323893] ? __switch_to_asm+0x34/0x70 [ 464.324554] ? __switch_to_asm+0x40/0x70 [ 464.325226] ? __switch_to_asm+0x40/0x70 [ 464.325863] ? __switch_to_asm+0x34/0x70 [ 464.326505] ? __switch_to_asm+0x40/0x70 [ 464.327161] ? __switch_to_asm+0x34/0x70 [ 464.327784] ? finish_task_switch+0xa1/0x330 [ 464.328414] ? __switch_to+0x363/0x640 [ 464.329044] ? __schedule+0x575/0xaf0 [ 464.329655] ? _raw_spin_lock_irqsave+0x82/0xe0 [ 464.330301] kthread+0x1a3/0x1f0 [ 464.330884] ? cifs_handle_standard+0x270/0x270 [ 464.331624] ? kthread_create_on_node+0xd0/0xd0 [ 464.332347] ret_from_fork+0x35/0x40 [ 464.333577] Allocated by task 1110: [ 464.334381] save_stack+0x1b/0x80 [ 464.335123] __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 464.335848] cifs_smb3_do_mount+0xd4/0xb00 [ 464.336619] legacy_get_tree+0x6b/0xa0 [ 464.337235] vfs_get_tree+0x41/0x110 [ 464.337975] fc_mount+0xa/0x40 [ 464.338557] vfs_kern_mount.part.0+0x6c/0x80 [ 464.339227] cifs_dfs_d_automount+0x336/0xd29 [ 464.339846] follow_managed+0x1b1/0x450 [ 464.340449] lookup_fast+0x231/0x4a0 [ 464.341039] path_openat+0x240/0x1fd0 [ 464.341634] do_filp_open+0x126/0x1c0 [ 464.342277] do_sys_open+0x1eb/0x2c0 [ 464.342957] do_syscall_64+0x5e/0x190 [ 464.343555] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 464.344772] Freed by task 0: [ 464.345347] save_stack+0x1b/0x80 [ 464.345966] __kasan_slab_free+0x12c/0x170 [ 464.346576] kfree+0xa6/0x270 [ 464.347211] rcu_core+0x39c/0xc80 [ 464.347800] __do_softirq+0x10d/0x3da [ 464.348919] The buggy address belongs to the object at ffff888155e58000 which belongs to the cache kmalloc-256 of size 256 [ 464.350222] The buggy address is located 208 bytes inside of 256-byte region [ffff888155e58000, ffff888155e58100) [ 464.351575] The buggy address belongs to the page: [ 464.352333] page:ffffea0005579600 refcount:1 mapcount:0 mapping:ffff88815a803400 index:0x0 compound_mapcount: 0 [ 464.353583] flags: 0x200000000010200(slab|head) [ 464.354209] raw: 0200000000010200 ffffea0005576200 0000000400000004 ffff88815a803400 [ 464.355353] raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 [ 464.356458] page dumped because: kasan: bad access detected [ 464.367005] Memory state around the buggy address: [ 464.367787] ffff888155e57f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 464.368877] ffff888155e58000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 464.369967] >ffff888155e58080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 464.371111] ^ [ 464.371775] ffff888155e58100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 464.372893] ffff888155e58180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 464.373983] ================================================================== Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25cifs: dump channel info in DebugDataAurelien Aptel1-1/+34
* show server&TCP states for extra channels * mention if an interface has a channel connected to it In this version three of the patch, fixed minor printk format issue pointed out by the kbuild robot. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25smb3: dump in_send and num_waiters stats counters by defaultSteve French2-21/+4
Number of requests in_send and the number of waiters on sendRecv are useful counters in various cases, move them from CONFIG_CIFS_STATS2 to be on by default especially with multichannel Signed-off-by: Steve French <stfrench@microsoft.com> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
2019-11-25cifs: try harder to open new channelsAurelien Aptel1-10/+22
Previously we would only loop over the iface list once. This patch tries to loop over multiple times until all channels are opened. It will also try to reuse RSS ifaces. Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25CIFS: Properly process SMB3 lease breaksPavel Shilovsky7-65/+57
Currenly we doesn't assume that a server may break a lease from RWH to RW which causes us setting a wrong lease state on a file and thus mistakenly flushing data and byte-range locks and purging cached data on the client. This leads to performance degradation because subsequent IOs go directly to the server. Fix this by propagating new lease state and epoch values to the oplock break handler through cifsFileInfo structure and removing the use of cifsInodeInfo flags for that. It allows to avoid some races of several lease/oplock breaks using those flags in parallel. Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25cifs: move cifsFileInfo_put logic into a work-queueRonnie Sahlberg3-27/+65
This patch moves the final part of the cifsFileInfo_put() logic where we need a write lock on lock_sem to be processed in a separate thread that holds no other locks. This is to prevent deadlocks like the one below: > there are 6 processes looping to while trying to down_write > cinode->lock_sem, 5 of them from _cifsFileInfo_put, and one from > cifs_new_fileinfo > > and there are 5 other processes which are blocked, several of them > waiting on either PG_writeback or PG_locked (which are both set), all > for the same page of the file > > 2 inode_lock() (inode->i_rwsem) for the file > 1 wait_on_page_writeback() for the page > 1 down_read(inode->i_rwsem) for the inode of the directory > 1 inode_lock()(inode->i_rwsem) for the inode of the directory > 1 __lock_page > > > so processes are blocked waiting on: > page flags PG_locked and PG_writeback for one specific page > inode->i_rwsem for the directory > inode->i_rwsem for the file > cifsInodeInflock_sem > > > > here are the more gory details (let me know if I need to provide > anything more/better): > > [0 00:48:22.765] [UN] PID: 8863 TASK: ffff8c691547c5c0 CPU: 3 > COMMAND: "reopen_file" > #0 [ffff9965007e3ba8] __schedule at ffffffff9b6e6095 > #1 [ffff9965007e3c38] schedule at ffffffff9b6e64df > #2 [ffff9965007e3c48] rwsem_down_write_slowpath at ffffffff9af283d7 > #3 [ffff9965007e3cb8] legitimize_path at ffffffff9b0f975d > #4 [ffff9965007e3d08] path_openat at ffffffff9b0fe55d > #5 [ffff9965007e3dd8] do_filp_open at ffffffff9b100a33 > #6 [ffff9965007e3ee0] do_sys_open at ffffffff9b0eb2d6 > #7 [ffff9965007e3f38] do_syscall_64 at ffffffff9ae04315 > * (I think legitimize_path is bogus) > > in path_openat > } else { > const char *s = path_init(nd, flags); > while (!(error = link_path_walk(s, nd)) && > (error = do_last(nd, file, op)) > 0) { <<<< > > do_last: > if (open_flag & O_CREAT) > inode_lock(dir->d_inode); <<<< > else > so it's trying to take inode->i_rwsem for the directory > > DENTRY INODE SUPERBLK TYPE PATH > ffff8c68bb8e79c0 ffff8c691158ef20 ffff8c6915bf9000 DIR /mnt/vm1_smb/ > inode.i_rwsem is ffff8c691158efc0 > > <struct rw_semaphore 0xffff8c691158efc0>: > owner: <struct task_struct 0xffff8c6914275d00> (UN - 8856 - > reopen_file), counter: 0x0000000000000003 > waitlist: 2 > 0xffff9965007e3c90 8863 reopen_file UN 0 1:29:22.926 > RWSEM_WAITING_FOR_WRITE > 0xffff996500393e00 9802 ls UN 0 1:17:26.700 > RWSEM_WAITING_FOR_READ > > > the owner of the inode.i_rwsem of the directory is: > > [0 00:00:00.109] [UN] PID: 8856 TASK: ffff8c6914275d00 CPU: 3 > COMMAND: "reopen_file" > #0 [ffff99650065b828] __schedule at ffffffff9b6e6095 > #1 [ffff99650065b8b8] schedule at ffffffff9b6e64df > #2 [ffff99650065b8c8] schedule_timeout at ffffffff9b6e9f89 > #3 [ffff99650065b940] msleep at ffffffff9af573a9 > #4 [ffff99650065b948] _cifsFileInfo_put.cold.63 at ffffffffc0a42dd6 [cifs] > #5 [ffff99650065ba38] cifs_writepage_locked at ffffffffc0a0b8f3 [cifs] > #6 [ffff99650065bab0] cifs_launder_page at ffffffffc0a0bb72 [cifs] > #7 [ffff99650065bb30] invalidate_inode_pages2_range at ffffffff9b04d4bd > #8 [ffff99650065bcb8] cifs_invalidate_mapping at ffffffffc0a11339 [cifs] > #9 [ffff99650065bcd0] cifs_revalidate_mapping at ffffffffc0a1139a [cifs] > #10 [ffff99650065bcf0] cifs_d_revalidate at ffffffffc0a014f6 [cifs] > #11 [ffff99650065bd08] path_openat at ffffffff9b0fe7f7 > #12 [ffff99650065bdd8] do_filp_open at ffffffff9b100a33 > #13 [ffff99650065bee0] do_sys_open at ffffffff9b0eb2d6 > #14 [ffff99650065bf38] do_syscall_64 at ffffffff9ae04315 > > cifs_launder_page is for page 0xffffd1e2c07d2480 > > crash> page.index,mapping,flags 0xffffd1e2c07d2480 > index = 0x8 > mapping = 0xffff8c68f3cd0db0 > flags = 0xfffffc0008095 > > PAGE-FLAG BIT VALUE > PG_locked 0 0000001 > PG_uptodate 2 0000004 > PG_lru 4 0000010 > PG_waiters 7 0000080 > PG_writeback 15 0008000 > > > inode is ffff8c68f3cd0c40 > inode.i_rwsem is ffff8c68f3cd0ce0 > DENTRY INODE SUPERBLK TYPE PATH > ffff8c68a1f1b480 ffff8c68f3cd0c40 ffff8c6915bf9000 REG > /mnt/vm1_smb/testfile.8853 > > > this process holds the inode->i_rwsem for the parent directory, is > laundering a page attached to the inode of the file it's opening, and in > _cifsFileInfo_put is trying to down_write the cifsInodeInflock_sem > for the file itself. > > > <struct rw_semaphore 0xffff8c68f3cd0ce0>: > owner: <struct task_struct 0xffff8c6914272e80> (UN - 8854 - > reopen_file), counter: 0x0000000000000003 > waitlist: 1 > 0xffff9965005dfd80 8855 reopen_file UN 0 1:29:22.912 > RWSEM_WAITING_FOR_WRITE > > this is the inode.i_rwsem for the file > > the owner: > > [0 00:48:22.739] [UN] PID: 8854 TASK: ffff8c6914272e80 CPU: 2 > COMMAND: "reopen_file" > #0 [ffff99650054fb38] __schedule at ffffffff9b6e6095 > #1 [ffff99650054fbc8] schedule at ffffffff9b6e64df > #2 [ffff99650054fbd8] io_schedule at ffffffff9b6e68e2 > #3 [ffff99650054fbe8] __lock_page at ffffffff9b03c56f > #4 [ffff99650054fc80] pagecache_get_page at ffffffff9b03dcdf > #5 [ffff99650054fcc0] grab_cache_page_write_begin at ffffffff9b03ef4c > #6 [ffff99650054fcd0] cifs_write_begin at ffffffffc0a064ec [cifs] > #7 [ffff99650054fd30] generic_perform_write at ffffffff9b03bba4 > #8 [ffff99650054fda8] __generic_file_write_iter at ffffffff9b04060a > #9 [ffff99650054fdf0] cifs_strict_writev.cold.70 at ffffffffc0a4469b [cifs] > #10 [ffff99650054fe48] new_sync_write at ffffffff9b0ec1dd > #11 [ffff99650054fed0] vfs_write at ffffffff9b0eed35 > #12 [ffff99650054ff00] ksys_write at ffffffff9b0eefd9 > #13 [ffff99650054ff38] do_syscall_64 at ffffffff9ae04315 > > the process holds the inode->i_rwsem for the file to which it's writing, > and is trying to __lock_page for the same page as in the other processes > > > the other tasks: > [0 00:00:00.028] [UN] PID: 8859 TASK: ffff8c6915479740 CPU: 2 > COMMAND: "reopen_file" > #0 [ffff9965007b39d8] __schedule at ffffffff9b6e6095 > #1 [ffff9965007b3a68] schedule at ffffffff9b6e64df > #2 [ffff9965007b3a78] schedule_timeout at ffffffff9b6e9f89 > #3 [ffff9965007b3af0] msleep at ffffffff9af573a9 > #4 [ffff9965007b3af8] cifs_new_fileinfo.cold.61 at ffffffffc0a42a07 [cifs] > #5 [ffff9965007b3b78] cifs_open at ffffffffc0a0709d [cifs] > #6 [ffff9965007b3cd8] do_dentry_open at ffffffff9b0e9b7a > #7 [ffff9965007b3d08] path_openat at ffffffff9b0fe34f > #8 [ffff9965007b3dd8] do_filp_open at ffffffff9b100a33 > #9 [ffff9965007b3ee0] do_sys_open at ffffffff9b0eb2d6 > #10 [ffff9965007b3f38] do_syscall_64 at ffffffff9ae04315 > > this is opening the file, and is trying to down_write cinode->lock_sem > > > [0 00:00:00.041] [UN] PID: 8860 TASK: ffff8c691547ae80 CPU: 2 > COMMAND: "reopen_file" > [0 00:00:00.057] [UN] PID: 8861 TASK: ffff8c6915478000 CPU: 3 > COMMAND: "reopen_file" > [0 00:00:00.059] [UN] PID: 8858 TASK: ffff8c6914271740 CPU: 2 > COMMAND: "reopen_file" > [0 00:00:00.109] [UN] PID: 8862 TASK: ffff8c691547dd00 CPU: 6 > COMMAND: "reopen_file" > #0 [ffff9965007c3c78] __schedule at ffffffff9b6e6095 > #1 [ffff9965007c3d08] schedule at ffffffff9b6e64df > #2 [ffff9965007c3d18] schedule_timeout at ffffffff9b6e9f89 > #3 [ffff9965007c3d90] msleep at ffffffff9af573a9 > #4 [ffff9965007c3d98] _cifsFileInfo_put.cold.63 at ffffffffc0a42dd6 [cifs] > #5 [ffff9965007c3e88] cifs_close at ffffffffc0a07aaf [cifs] > #6 [ffff9965007c3ea0] __fput at ffffffff9b0efa6e > #7 [ffff9965007c3ee8] task_work_run at ffffffff9aef1614 > #8 [ffff9965007c3f20] exit_to_usermode_loop at ffffffff9ae03d6f > #9 [ffff9965007c3f38] do_syscall_64 at ffffffff9ae0444c > > closing the file, and trying to down_write cifsi->lock_sem > > > [0 00:48:22.839] [UN] PID: 8857 TASK: ffff8c6914270000 CPU: 7 > COMMAND: "reopen_file" > #0 [ffff9965006a7cc8] __schedule at ffffffff9b6e6095 > #1 [ffff9965006a7d58] schedule at ffffffff9b6e64df > #2 [ffff9965006a7d68] io_schedule at ffffffff9b6e68e2 > #3 [ffff9965006a7d78] wait_on_page_bit at ffffffff9b03cac6 > #4 [ffff9965006a7e10] __filemap_fdatawait_range at ffffffff9b03b028 > #5 [ffff9965006a7ed8] filemap_write_and_wait at ffffffff9b040165 > #6 [ffff9965006a7ef0] cifs_flush at ffffffffc0a0c2fa [cifs] > #7 [ffff9965006a7f10] filp_close at ffffffff9b0e93f1 > #8 [ffff9965006a7f30] __x64_sys_close at ffffffff9b0e9a0e > #9 [ffff9965006a7f38] do_syscall_64 at ffffffff9ae04315 > > in __filemap_fdatawait_range > wait_on_page_writeback(page); > for the same page of the file > > > > [0 00:48:22.718] [UN] PID: 8855 TASK: ffff8c69142745c0 CPU: 7 > COMMAND: "reopen_file" > #0 [ffff9965005dfc98] __schedule at ffffffff9b6e6095 > #1 [ffff9965005dfd28] schedule at ffffffff9b6e64df > #2 [ffff9965005dfd38] rwsem_down_write_slowpath at ffffffff9af283d7 > #3 [ffff9965005dfdf0] cifs_strict_writev at ffffffffc0a0c40a [cifs] > #4 [ffff9965005dfe48] new_sync_write at ffffffff9b0ec1dd > #5 [ffff9965005dfed0] vfs_write at ffffffff9b0eed35 > #6 [ffff9965005dff00] ksys_write at ffffffff9b0eefd9 > #7 [ffff9965005dff38] do_syscall_64 at ffffffff9ae04315 > > inode_lock(inode); > > > and one 'ls' later on, to see whether the rest of the mount is available > (the test file is in the root, so we get blocked up on the directory > ->i_rwsem), so the entire mount is unavailable > > [0 00:36:26.473] [UN] PID: 9802 TASK: ffff8c691436ae80 CPU: 4 > COMMAND: "ls" > #0 [ffff996500393d28] __schedule at ffffffff9b6e6095 > #1 [ffff996500393db8] schedule at ffffffff9b6e64df > #2 [ffff996500393dc8] rwsem_down_read_slowpath at ffffffff9b6e9421 > #3 [ffff996500393e78] down_read_killable at ffffffff9b6e95e2 > #4 [ffff996500393e88] iterate_dir at ffffffff9b103c56 > #5 [ffff996500393ec8] ksys_getdents64 at ffffffff9b104b0c > #6 [ffff996500393f30] __x64_sys_getdents64 at ffffffff9b104bb6 > #7 [ffff996500393f38] do_syscall_64 at ffffffff9ae04315 > > in iterate_dir: > if (shared) > res = down_read_killable(&inode->i_rwsem); <<<< > else > res = down_write_killable(&inode->i_rwsem); > Reported-by: Frank Sorenson <sorenson@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25cifs: try opening channels after mountingAurelien Aptel9-88/+478
After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25CIFS: refactor cifs_get_inode_info()Aurelien Aptel2-137/+205
Make logic of cifs_get_inode() much clearer by moving code to sub functions and adding comments. Document the steps this function does. cifs_get_inode_info() gets and updates a file inode metadata from its file path. * If caller already has raw info data from server they can pass it. * If inode already exists (just need to update) caller can pass it. Step 1: get raw data from server if none was passed Step 2: parse raw data into intermediate internal cifs_fattr struct Step 3: set fattr uniqueid which is later used for inode number. This can sometime be done from raw data Step 4: tweak fattr according to mount options (file_mode, acl to mode bits, uid, gid, etc) Step 5: update or create inode from final fattr struct * add is_smb1_server() helper * add is_inode_cache_good() helper * move SMB1-backupcreds-getinfo-retry to separate func cifs_backup_query_path_info(). * move set-uniqueid code to separate func cifs_set_fattr_ino() * don't clobber uniqueid from backup cred retry * fix some probable corner cases memleaks Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25cifs: switch servers depending on binding stateAurelien Aptel6-21/+33
Currently a lot of the code to initialize a connection & session uses the cifs_ses as input. But depending on if we are opening a new session or a new channel we need to use different server pointers. Add a "binding" flag in cifs_ses and a helper function that returns the server ptr a session should use (only in the sess establishment code path). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25cifs: add server paramAurelien Aptel5-17/+22
As we get down to the transport layer, plenty of functions are passed the session pointer and assume the transport to use is ses->server. Instead we modify those functions to pass (ses, server) so that we can decouple the session from the server. Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25cifs: add multichannel mount options and data structsAurelien Aptel3-2/+56
adds: - [no]multichannel to enable/disable multichannel - max_channels=N to control how many channels to create these options are then stored in the volume struct. - store channels and max_channels in cifs_ses Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25cifs: sort interface list by speedAurelien Aptel1-0/+11
New channels are going to be opened by walking the list sequentially, so by sorting it we will connect to the fastest interfaces first. Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25CIFS: Fix SMB2 oplock break processingPavel Shilovsky1-4/+3
Even when mounting modern protocol version the server may be configured without supporting SMB2.1 leases and the client uses SMB2 oplock to optimize IO performance through local caching. However there is a problem in oplock break handling that leads to missing a break notification on the client who has a file opened. It latter causes big latencies to other clients that are trying to open the same file. The problem reproduces when there are multiple shares from the same server mounted on the client. The processing code tries to match persistent and volatile file ids from the break notification with an open file but it skips all share besides the first one. Fix this by looking up in all shares belonging to the server that issued the oplock break. Cc: Stable <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25cifs: don't use 'pre:' for MODULE_SOFTDEPRonnie Sahlberg1-12/+12
It can cause to fail with modprobe: FATAL: Module <module> is builtin. RHBZ: 1767094 Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25cifs: smbd: Return -EAGAIN when transport is reconnectingLong Li1-2/+5
During reconnecting, the transport may have already been destroyed and is in the process being reconnected. In this case, return -EAGAIN to not fail and to retry this I/O. Signed-off-by: Long Li <longli@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25cifs: smbd: Only queue work for error recovery on memory registrationLong Li1-11/+15
It's not necessary to queue invalidated memory registration to work queue, as all we need to do is to unmap the SG and make it usable again. This can save CPU cycles in normal data paths as memory registration errors are rare and normally only happens during reconnection. Signed-off-by: Long Li <longli@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25smb3: add debug messages for closing unmatched openRonnie Sahlberg2-10/+34
Helps distinguish between an interrupted close and a truly unmatched open. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25CIFS: Do not miss cancelled OPEN responsesPavel Shilovsky2-8/+8
When an OPEN command is cancelled we mark a mid as cancelled and let the demultiplex thread process it by closing an open handle. The problem is there is a race between a system call thread and the demultiplex thread and there may be a situation when the mid has been already processed before it is set as cancelled. Fix this by processing cancelled requests when mids are being destroyed which means that there is only one thread referencing a particular mid. Also set mids as cancelled unconditionally on their state. Cc: Stable <stable@vger.kernel.org> Tested-by: Frank Sorenson <sorenson@redhat.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25CIFS: Fix NULL pointer dereference in mid callbackPavel Shilovsky3-7/+17
There is a race between a system call processing thread and the demultiplex thread when mid->resp_buf becomes NULL and later is being accessed to get credits. It happens when the 1st thread wakes up before a mid callback is called in the 2nd one but the mid state has already been set to MID_RESPONSE_RECEIVED. This causes NULL pointer dereference in mid callback. Fix this by saving credits from the response before we update the mid state and then use this value in the mid callback rather then accessing a response buffer. Cc: Stable <stable@vger.kernel.org> Fixes: ee258d79159afed5 ("CIFS: Move credit processing to mid callbacks for SMB3") Tested-by: Frank Sorenson <sorenson@redhat.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25CIFS: Close open handle after interrupted closePavel Shilovsky3-15/+63
If Close command is interrupted before sending a request to the server the client ends up leaking an open file handle. This wastes server resources and can potentially block applications that try to remove the file or any directory containing this file. Fix this by putting the close command into a worker queue, so another thread retries it later. Cc: Stable <stable@vger.kernel.org> Tested-by: Frank Sorenson <sorenson@redhat.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25CIFS: Respect O_SYNC and O_DIRECT flags during reconnectPavel Shilovsky1-0/+7
Currently the client translates O_SYNC and O_DIRECT flags into corresponding SMB create options when openning a file. The problem is that on reconnect when the file is being re-opened the client doesn't set those flags and it causes a server to reject re-open requests because create options don't match. The latter means that any subsequent system call against that open file fail until a share is re-mounted. Fix this by properly setting SMB create options when re-openning files after reconnects. Fixes: 1013e760d10e6: ("SMB3: Don't ignore O_SYNC/O_DSYNC and O_DIRECT flags") Cc: Stable <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25smb3: remove confusing dmesg when mounting with encryption ("seal")Steve French1-8/+2
The smb2/smb3 message checking code was logging to dmesg when mounting with encryption ("seal") for compounded SMB3 requests. When encrypted the whole frame (including potentially multiple compounds) is read so the length field is longer than in the case of non-encrypted case (where length field will match the the calculated length for the particular SMB3 request in the compound being validated). Avoids the warning on mount (with "seal"): "srv rsp padded more than expected. Length 384 not ..." Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25cifs: close the shared root handle on tree disconnectRonnie Sahlberg1-0/+2
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25CIFS: Return directly after a failed build_path_from_dentry() in cifs_do_create()Markus Elfring1-4/+2
Return directly after a call of the function "build_path_from_dentry" failed at the beginning. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25CIFS: Use common error handling code in smb2_ioctl_query_info()Markus Elfring1-22/+23
Move the same error code assignments so that such exception handling can be better reused at the end of this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25CIFS: Use memdup_user() rather than duplicating its implementationMarkus Elfring1-9/+4
Reuse existing functionality from memdup_user() instead of keeping duplicate source code. Generated by: scripts/coccinelle/api/memdup_user.cocci Fixes: f5b05d622a3e99e6a97a189fe500414be802a05c ("cifs: add IOCTL for QUERY_INFO passthrough to userspace") Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25cifs: smbd: Return -ECONNABORTED when trasnport is not in connected stateLong Li1-1/+1
The transport should return this error so the upper layer will reconnect. Signed-off-by: Long Li <longli@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.