aboutsummaryrefslogtreecommitdiffstats
path: root/fs/cifs (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-11-04cifs: fix use-after-free on the link nameChenXiaoSong2-6/+25
xfstests generic/011 reported use-after-free bug as follows: BUG: KASAN: use-after-free in __d_alloc+0x269/0x859 Read of size 15 at addr ffff8880078933a0 by task dirstress/952 CPU: 1 PID: 952 Comm: dirstress Not tainted 6.1.0-rc3+ #77 Call Trace: __dump_stack+0x23/0x29 dump_stack_lvl+0x51/0x73 print_address_description+0x67/0x27f print_report+0x3e/0x5c kasan_report+0x7b/0xa8 kasan_check_range+0x1b2/0x1c1 memcpy+0x22/0x5d __d_alloc+0x269/0x859 d_alloc+0x45/0x20c d_alloc_parallel+0xb2/0x8b2 lookup_open+0x3b8/0x9f9 open_last_lookups+0x63d/0xc26 path_openat+0x11a/0x261 do_filp_open+0xcc/0x168 do_sys_openat2+0x13b/0x3f7 do_sys_open+0x10f/0x146 __se_sys_creat+0x27/0x2e __x64_sys_creat+0x55/0x6a do_syscall_64+0x40/0x96 entry_SYSCALL_64_after_hwframe+0x63/0xcd Allocated by task 952: kasan_save_stack+0x1f/0x42 kasan_set_track+0x21/0x2a kasan_save_alloc_info+0x17/0x1d __kasan_kmalloc+0x7e/0x87 __kmalloc_node_track_caller+0x59/0x155 kstrndup+0x60/0xe6 parse_mf_symlink+0x215/0x30b check_mf_symlink+0x260/0x36a cifs_get_inode_info+0x14e1/0x1690 cifs_revalidate_dentry_attr+0x70d/0x964 cifs_revalidate_dentry+0x36/0x62 cifs_d_revalidate+0x162/0x446 lookup_open+0x36f/0x9f9 open_last_lookups+0x63d/0xc26 path_openat+0x11a/0x261 do_filp_open+0xcc/0x168 do_sys_openat2+0x13b/0x3f7 do_sys_open+0x10f/0x146 __se_sys_creat+0x27/0x2e __x64_sys_creat+0x55/0x6a do_syscall_64+0x40/0x96 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 950: kasan_save_stack+0x1f/0x42 kasan_set_track+0x21/0x2a kasan_save_free_info+0x1c/0x34 ____kasan_slab_free+0x1c1/0x1d5 __kasan_slab_free+0xe/0x13 __kmem_cache_free+0x29a/0x387 kfree+0xd3/0x10e cifs_fattr_to_inode+0xb6a/0xc8c cifs_get_inode_info+0x3cb/0x1690 cifs_revalidate_dentry_attr+0x70d/0x964 cifs_revalidate_dentry+0x36/0x62 cifs_d_revalidate+0x162/0x446 lookup_open+0x36f/0x9f9 open_last_lookups+0x63d/0xc26 path_openat+0x11a/0x261 do_filp_open+0xcc/0x168 do_sys_openat2+0x13b/0x3f7 do_sys_open+0x10f/0x146 __se_sys_creat+0x27/0x2e __x64_sys_creat+0x55/0x6a do_syscall_64+0x40/0x96 entry_SYSCALL_64_after_hwframe+0x63/0xcd When opened a symlink, link name is from 'inode->i_link', but it may be reset to a new value when revalidate the dentry. If some processes get the link name on the race scenario, then UAF will happen on link name. Fix this by implementing 'get_link' interface to duplicate the link name. Fixes: 76894f3e2f71 ("cifs: improve symlink handling for smb2+") Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-11-04cifs: avoid unnecessary iteration of tcp sessionsShyam Prasad N3-51/+55
In a few places, we do unnecessary iterations of tcp sessions, even when the server struct is provided. The change avoids it and uses the server struct provided. Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-11-04cifs: always iterate smb sessions using primary channelShyam Prasad N4-5/+25
smb sessions and tcons currently hang off primary channel only. Secondary channels have the lists as empty. Whenever there's a need to iterate sessions or tcons, we should use the list in the corresponding primary channel. Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-27cifs: fix use-after-free caused by invalid pointer `hostname`Zeng Heng1-0/+1
`hostname` needs to be set as null-pointer after free in `cifs_put_tcp_session` function, or when `cifsd` thread attempts to resolve hostname and reconnect the host, the thread would deref the invalid pointer. Here is one of practical backtrace examples as reference: Task 477 --------------------------- do_mount path_mount do_new_mount vfs_get_tree smb3_get_tree smb3_get_tree_common cifs_smb3_do_mount cifs_mount mount_put_conns cifs_put_tcp_session --> kfree(server->hostname) cifsd --------------------------- kthread cifs_demultiplex_thread cifs_reconnect reconn_set_ipaddr_from_hostname --> if (!server->hostname) --> if (server->hostname[0] == '\0') // !! UAF fault here CIFS: VFS: cifs_mount failed w/return code = -112 mount error(112): Host is down BUG: KASAN: use-after-free in reconn_set_ipaddr_from_hostname+0x2ba/0x310 Read of size 1 at addr ffff888108f35380 by task cifsd/480 CPU: 2 PID: 480 Comm: cifsd Not tainted 6.1.0-rc2-00106-gf705792f89dd-dirty #25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x68/0x85 print_report+0x16c/0x4a3 kasan_report+0x95/0x190 reconn_set_ipaddr_from_hostname+0x2ba/0x310 __cifs_reconnect.part.0+0x241/0x800 cifs_reconnect+0x65f/0xb60 cifs_demultiplex_thread+0x1570/0x2570 kthread+0x2c5/0x380 ret_from_fork+0x22/0x30 </TASK> Allocated by task 477: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_kmalloc+0x7e/0x90 __kmalloc_node_track_caller+0x52/0x1b0 kstrdup+0x3b/0x70 cifs_get_tcp_session+0xbc/0x19b0 mount_get_conns+0xa9/0x10c0 cifs_mount+0xdf/0x1970 cifs_smb3_do_mount+0x295/0x1660 smb3_get_tree+0x352/0x5e0 vfs_get_tree+0x8e/0x2e0 path_mount+0xf8c/0x1990 do_mount+0xee/0x110 __x64_sys_mount+0x14b/0x1f0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 477: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x50 __kasan_slab_free+0x10a/0x190 __kmem_cache_free+0xca/0x3f0 cifs_put_tcp_session+0x30c/0x450 cifs_mount+0xf95/0x1970 cifs_smb3_do_mount+0x295/0x1660 smb3_get_tree+0x352/0x5e0 vfs_get_tree+0x8e/0x2e0 path_mount+0xf8c/0x1990 do_mount+0xee/0x110 __x64_sys_mount+0x14b/0x1f0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd The buggy address belongs to the object at ffff888108f35380 which belongs to the cache kmalloc-16 of size 16 The buggy address is located 0 bytes inside of 16-byte region [ffff888108f35380, ffff888108f35390) The buggy address belongs to the physical page: page:00000000333f8e58 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888108f350e0 pfn:0x108f35 flags: 0x200000000000200(slab|node=0|zone=2) raw: 0200000000000200 0000000000000000 dead000000000122 ffff8881000423c0 raw: ffff888108f350e0 000000008080007a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888108f35280: fa fb fc fc fa fb fc fc fa fb fc fc fa fb fc fc ffff888108f35300: fa fb fc fc fa fb fc fc fa fb fc fc fa fb fc fc >ffff888108f35380: fa fb fc fc fa fb fc fc fa fb fc fc fa fb fc fc ^ ffff888108f35400: fa fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888108f35480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: 7be3248f3139 ("cifs: To match file servers, make sure the server hostname matches") Signed-off-by: Zeng Heng <zengheng4@huawei.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-23cifs: Fix pages leak when writedata alloc failed in cifs_write_from_iter()Zhang Xiaoxu1-0/+3
There is a kmemleak when writedata alloc failed: unreferenced object 0xffff888175ae4000 (size 4096): comm "dd", pid 19419, jiffies 4296028749 (age 739.396s) hex dump (first 32 bytes): 80 02 b0 04 00 ea ff ff c0 02 b0 04 00 ea ff ff ................ 80 22 4c 04 00 ea ff ff c0 22 4c 04 00 ea ff ff ."L......"L..... backtrace: [<0000000072fdbb86>] __kmalloc_node+0x50/0x150 [<0000000039faf56f>] __iov_iter_get_pages_alloc+0x605/0xdd0 [<00000000f862a9d4>] iov_iter_get_pages_alloc2+0x3b/0x80 [<000000008f226067>] cifs_write_from_iter+0x2ae/0xe40 [<000000001f78f2f1>] __cifs_writev+0x337/0x5c0 [<00000000257fcef5>] vfs_write+0x503/0x690 [<000000008778a238>] ksys_write+0xb9/0x150 [<00000000ed82047c>] do_syscall_64+0x35/0x80 [<000000003365551d>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 __iov_iter_get_pages_alloc+0x605/0xdd0 is: want_pages_array at lib/iov_iter.c:1304 (inlined by) __iov_iter_get_pages_alloc at lib/iov_iter.c:1457 If writedata allocate failed, the pages and pagevec should be cleanup. Fixes: 8c5f9c1ab7cb ("CIFS: Add support for direct I/O write") Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-23cifs: Fix pages array leak when writedata alloc failed in cifs_writedata_alloc()Zhang Xiaoxu1-3/+7
There is a memory leak when writedata alloc failed: unreferenced object 0xffff888192364000 (size 8192): comm "sync", pid 22839, jiffies 4297313967 (age 60.230s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000027de0814>] __kmalloc+0x4d/0x150 [<00000000b21e81ab>] cifs_writepages+0x35f/0x14a0 [<0000000076f7d20e>] do_writepages+0x10a/0x360 [<00000000d6a36edc>] filemap_fdatawrite_wbc+0x95/0xc0 [<000000005751a323>] __filemap_fdatawrite_range+0xa7/0xe0 [<0000000088afb0ca>] file_write_and_wait_range+0x66/0xb0 [<0000000063dbc443>] cifs_strict_fsync+0x80/0x5f0 [<00000000c4624754>] __x64_sys_fsync+0x40/0x70 [<000000002c0dc744>] do_syscall_64+0x35/0x80 [<0000000052f46bee>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 cifs_writepages+0x35f/0x14a0 is: kmalloc_array at include/linux/slab.h:628 (inlined by) kcalloc at include/linux/slab.h:659 (inlined by) cifs_writedata_alloc at fs/cifs/file.c:2438 (inlined by) wdata_alloc_and_fillpages at fs/cifs/file.c:2527 (inlined by) cifs_writepages at fs/cifs/file.c:2705 If writedata alloc failed in cifs_writedata_alloc(), the pages array should be freed. Fixes: 8e7360f67e75 ("CIFS: Add support for direct pages in wdata") Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-19cifs: update internal module numberSteve French1-2/+2
To 2.40 Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-19cifs: fix memory leaks in session setupPaulo Alcantara1-8/+7
We were only zeroing out the ntlmssp blob but forgot to free the allocated buffer in the end of SMB2_sess_auth_rawntlmssp_negotiate() and SMB2_sess_auth_rawntlmssp_authenticate() functions. This fixes below kmemleak reports: unreferenced object 0xffff88800ddcfc60 (size 96): comm "mount.cifs", pid 758, jiffies 4294696066 (age 42.967s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d0beeb29>] __kmalloc+0x39/0xa0 [<00000000e3834047>] build_ntlmssp_smb3_negotiate_blob+0x2c/0x110 [cifs] [<00000000e85f5ab2>] SMB2_sess_auth_rawntlmssp_negotiate+0xd3/0x230 [cifs] [<0000000080fdb897>] SMB2_sess_setup+0x16c/0x2a0 [cifs] [<000000009af320a8>] cifs_setup_session+0x13b/0x370 [cifs] [<00000000f15d5982>] cifs_get_smb_ses+0x643/0xb90 [cifs] [<00000000fe15eb90>] mount_get_conns+0x63/0x3e0 [cifs] [<00000000768aba03>] mount_get_dfs_conns+0x16/0xa0 [cifs] [<00000000cf1cf146>] cifs_mount+0x1c2/0x9a0 [cifs] [<000000000d66b51e>] cifs_smb3_do_mount+0x10e/0x710 [cifs] [<0000000077a996c5>] smb3_get_tree+0xf4/0x200 [cifs] [<0000000094dbd041>] vfs_get_tree+0x23/0xc0 [<000000003a8561de>] path_mount+0x2d3/0xb50 [<00000000ed5c86d6>] __x64_sys_mount+0x102/0x140 [<00000000142142f3>] do_syscall_64+0x3b/0x90 [<00000000e2b89731>] entry_SYSCALL_64_after_hwframe+0x63/0xcd unreferenced object 0xffff88801437f000 (size 512): comm "mount.cifs", pid 758, jiffies 4294696067 (age 42.970s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d0beeb29>] __kmalloc+0x39/0xa0 [<00000000004f53d2>] build_ntlmssp_auth_blob+0x4f/0x340 [cifs] [<000000005f333084>] SMB2_sess_auth_rawntlmssp_authenticate+0xd4/0x250 [cifs] [<0000000080fdb897>] SMB2_sess_setup+0x16c/0x2a0 [cifs] [<000000009af320a8>] cifs_setup_session+0x13b/0x370 [cifs] [<00000000f15d5982>] cifs_get_smb_ses+0x643/0xb90 [cifs] [<00000000fe15eb90>] mount_get_conns+0x63/0x3e0 [cifs] [<00000000768aba03>] mount_get_dfs_conns+0x16/0xa0 [cifs] [<00000000cf1cf146>] cifs_mount+0x1c2/0x9a0 [cifs] [<000000000d66b51e>] cifs_smb3_do_mount+0x10e/0x710 [cifs] [<0000000077a996c5>] smb3_get_tree+0xf4/0x200 [cifs] [<0000000094dbd041>] vfs_get_tree+0x23/0xc0 [<000000003a8561de>] path_mount+0x2d3/0xb50 [<00000000ed5c86d6>] __x64_sys_mount+0x102/0x140 [<00000000142142f3>] do_syscall_64+0x3b/0x90 [<00000000e2b89731>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: a4e430c8c8ba ("cifs: replace kfree() with kfree_sensitive() for sensitive data") Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-19cifs: drop the lease for cached directories on rmdir or renameRonnie Sahlberg3-0/+27
When we delete or rename a directory we must also drop any cached lease we have on the directory. Fixes: a350d6e73f5e ("cifs: enable caching of directories for which a lease is held") Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-19smb3: interface count displayed incorrectlySteve French1-1/+2
The "Server interfaces" count in /proc/fs/cifs/DebugData increases as the interfaces are requeried, rather than being reset to the new value. This could cause a problem if the server disabled multichannel as the iface_count is checked in try_adding_channels to see if multichannel still supported. Also fixes a coverity warning: Addresses-Coverity: 1526374 ("Concurrent data access violations (MISSING_LOCK)") Cc: <stable@vger.kernel.org> Reviewed-by: Bharath SM <bharathsm@microsoft.com> Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-18cifs: Fix memory leak when build ntlmssp negotiate blob failedZhang Xiaoxu1-1/+1
There is a memory leak when mount cifs: unreferenced object 0xffff888166059600 (size 448): comm "mount.cifs", pid 51391, jiffies 4295596373 (age 330.596s) hex dump (first 32 bytes): fe 53 4d 42 40 00 00 00 00 00 00 00 01 00 82 00 .SMB@........... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000060609a61>] mempool_alloc+0xe1/0x260 [<00000000adfa6c63>] cifs_small_buf_get+0x24/0x60 [<00000000ebb404c7>] __smb2_plain_req_init+0x32/0x460 [<00000000bcf875b4>] SMB2_sess_alloc_buffer+0xa4/0x3f0 [<00000000753a2987>] SMB2_sess_auth_rawntlmssp_negotiate+0xf5/0x480 [<00000000f0c1f4f9>] SMB2_sess_setup+0x253/0x410 [<00000000a8b83303>] cifs_setup_session+0x18f/0x4c0 [<00000000854bd16d>] cifs_get_smb_ses+0xae7/0x13c0 [<000000006cbc43d9>] mount_get_conns+0x7a/0x730 [<000000005922d816>] cifs_mount+0x103/0xd10 [<00000000e33def3b>] cifs_smb3_do_mount+0x1dd/0xc90 [<0000000078034979>] smb3_get_tree+0x1d5/0x300 [<000000004371f980>] vfs_get_tree+0x41/0xf0 [<00000000b670d8a7>] path_mount+0x9b3/0xdd0 [<000000005e839a7d>] __x64_sys_mount+0x190/0x1d0 [<000000009404c3b9>] do_syscall_64+0x35/0x80 When build ntlmssp negotiate blob failed, the session setup request should be freed. Fixes: 49bd49f983b5 ("cifs: send workstation name during ntlmssp session setup") Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-18cifs: set rc to -ENOENT if we can not get a dentry for the cached dirRonnie Sahlberg1-2/+4
We already set rc to this return code further down in the function but we can set it earlier in order to suppress a smash warning. Also fix a false positive for Coverity. The reason this is a false positive is that this happens during umount after all files and directories have been closed but mosetting on ->on_list to suppress the warning. Reported-by: Dan carpenter <dan.carpenter@oracle.com> Reported-by: coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1525256 ("Concurrent data access violations") Fixes: a350d6e73f5e ("cifs: enable caching of directories for which a lease is held") Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-18cifs: use LIST_HEAD() and list_move() to simplify codeYang Yingliang1-8/+4
list_head can be initialized automatically with LIST_HEAD() instead of calling INIT_LIST_HEAD(). Using list_move() instead of list_del() and list_add(). Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-18cifs: Fix xid leak in cifs_get_file_info_unix()Zhang Xiaoxu1-2/+4
If stardup the symlink target failed, should free the xid, otherwise the xid will be leaked. Fixes: 76894f3e2f71 ("cifs: improve symlink handling for smb2+") Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-18cifs: Fix xid leak in cifs_ses_add_channel()Zhang Xiaoxu1-0/+1
Before return, should free the xid, otherwise, the xid will be leaked. Fixes: d70e9fa55884 ("cifs: try opening channels after mounting") Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-18cifs: Fix xid leak in cifs_flock()Zhang Xiaoxu1-4/+7
If not flock, before return -ENOLCK, should free the xid, otherwise, the xid will be leaked. Fixes: d0677992d2af ("cifs: add support for flock") Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-18cifs: Fix xid leak in cifs_copy_file_range()Zhang Xiaoxu1-2/+5
If the file is used by swap, before return -EOPNOTSUPP, should free the xid, otherwise, the xid will be leaked. Fixes: 4e8aea30f775 ("smb3: enable swap on SMB3 mounts") Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-18cifs: Fix xid leak in cifs_create()Zhang Xiaoxu1-2/+4
If the cifs already shutdown, we should free the xid before return, otherwise, the xid will be leaked. Fixes: 087f757b0129 ("cifs: add shutdown support") Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-15smb3: improve SMB3 change notification supportSteve French6-13/+90
Change notification is a commonly supported feature by most servers, but the current ioctl to request notification when a directory is changed does not return the information about what changed (even though it is returned by the server in the SMB3 change notify response), it simply returns when there is a change. This ioctl improves upon CIFS_IOC_NOTIFY by returning the notify information structure which includes the name of the file(s) that changed and why. See MS-SMB2 2.2.35 for details on the individual filter flags and the file_notify_information structure returned. To use this simply pass in the following (with enough space to fit at least one file_notify_information structure) struct __attribute__((__packed__)) smb3_notify { uint32_t completion_filter; bool watch_tree; uint32_t data_len; uint8_t data[]; } __packed; using CIFS_IOC_NOTIFY_INFO 0xc009cf0b or equivalently _IOWR(CIFS_IOCTL_MAGIC, 11, struct smb3_notify_info) The ioctl will block until the server detects a change to that directory or its subdirectories (if watch_tree is set). Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-15cifs: lease key is uninitialized in two additional functions when smb1Steve French1-2/+2
cifs_open and _cifsFileInfo_put also end up with lease_key uninitialized in smb1 mounts. It is cleaner to set lease key to zero in these places where leases are not supported (smb1 can not return lease keys so the field was uninitialized). Addresses-Coverity: 1514207 ("Uninitialized scalar variable") Addresses-Coverity: 1514331 ("Uninitialized scalar variable") Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-15cifs: lease key is uninitialized in smb1 pathsSteve French1-1/+1
It is cleaner to set lease key to zero in the places where leases are not supported (smb1 can not return lease keys so the field was uninitialized). Addresses-Coverity: 1513994 ("Uninitialized scalar variable") Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-15smb3: must initialize two ACL struct fields to zeroSteve French1-1/+2
Coverity spotted that we were not initalizing Stbz1 and Stbz2 to zero in create_sd_buf. Addresses-Coverity: 1513848 ("Uninitialized scalar variable") Cc: <stable@vger.kernel.org> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-15cifs: fix double-fault crash during ntlmsspPaulo Alcantara1-7/+9
The crash occurred because we were calling memzero_explicit() on an already freed sess_data::iov[1] (ntlmsspblob) in sess_free_buffer(). Fix this by not calling memzero_explicit() on sess_data::iov[1] as it's already by handled by callers. Fixes: a4e430c8c8ba ("cifs: replace kfree() with kfree_sensitive() for sensitive data") Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-14cifs: fix static checker warningPaulo Alcantara1-1/+1
Remove unnecessary NULL check of oparam->cifs_sb when parsing symlink error response as it's already set by all smb2_open_file() callers and deferenced earlier. This fixes below report: fs/cifs/smb2file.c:126 smb2_open_file() warn: variable dereferenced before check 'oparms->cifs_sb' (see line 112) Link: https://lore.kernel.org/r/Y0kt42j2tdpYakRu@kili Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-13cifs: use ALIGN() and round_up() macrosEnzo Matsumiya5-38/+33
Improve code readability by using existing macros: Replace hardcoded alignment computations (e.g. (len + 7) & ~0x7) by ALIGN()/IS_ALIGNED() macros. Also replace (DIV_ROUND_UP(len, 8) * 8) with ALIGN(len, 8), which, if not optimized by the compiler, has the overhead of a multiplication and a division. Do the same for roundup() by replacing it by round_up() (division-less version, but requires the multiple to be a power of 2, which is always the case for us). And remove some unnecessary checks where !IS_ALIGNED() would fit, but calling round_up() directly is fine as it's a no-op if the value is already aligned. Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-13cifs: find and use the dentry for cached non-root directories alsoRonnie Sahlberg1-14/+49
This allows us to use cached attributes for the entries in a cached directory for as long as a lease is held on the directory itself. Previously we have always allowed "used cached attributes for 1 second" but this extends this to the lifetime of the lease as well as making the caching safer. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-13cifs: enable caching of directories for which a lease is heldRonnie Sahlberg4-193/+263
This expands the directory caching to now cache an open handle for all directories (up to a maximum) and not just the root directory. In this patch, locking and refcounting is intended to work as so: The main function to get a reference to a cached handle is find_or_create_cached_dir() called from open_cached_dir() These functions are protected under the cfid_list_lock spin-lock to make sure we do not race creating new references for cached dirs with deletion of expired ones. An successful open_cached_dir() will take out 2 references to the cfid if this was the very first and successful call to open the directory and it acquired a lease from the server. One reference is for the lease and the other is for the cfid that we return. The is lease reference is tracked by cfid->has_lease. If the directory already has a handle with an active lease, then we just take out one new reference for the cfid and return it. It can happen that we have a thread that tries to open a cached directory where we have a cfid already but we do not, yet, have a working lease. In this case we will just return NULL, and this the caller will fall back to the case when no handle was available. In this model the total number of references we have on a cfid is 1 for while the handle is open and we have a lease, and one additional reference for each open instance of a cfid. Once we get a lease break (cached_dir_lease_break()) we remove the cfid from the list under the spinlock. This prevents any new threads to use it, and we also call smb2_cached_lease_break() via the work_queue in order to drop the reference we got for the lease (we drop it outside of the spin-lock.) Anytime a thread calls close_cached_dir() we also drop a reference to the cfid. When the last reference to the cfid is released smb2_close_cached_fid() will be invoked which will drop the reference ot the dentry we held for this cfid and it will also, if we the handle is open/has a lease also call SMB2_close() to close the handle on the server. Two events require special handling: invalidate_all_cached_dirs() this function is called from SMB2_tdis() and cifs_mark_open_files_invalid(). In both cases the tcon is either gone already or will be shortly so we do not need to actually close the handles. They will be dropped server side as part of the tcon dropping. But we have to be careful about a potential race with a concurrent lease break so we need to take out additional refences to avoid the cfid from being freed while we are still referencing it. free_cached_dirs() which is called from tconInfoFree(). This is called quite late in the umount process so there should no longer be any open handles or files and we can just free all the remaining data. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-13cifs: prevent copying past input buffer boundariesPaulo Alcantara1-2/+2
Prevent copying past @data buffer in smb2_validate_and_copy_iov() as the output buffer in @iov might be potentially bigger and thus copying more bytes than requested in @minbufsize. Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-13cifs: fix uninitialised var in smb2_compound_op()Paulo Alcantara1-0/+1
Fix uninitialised variable @idata when calling smb2_compound_op() with SMB2_OP_POSIX_QUERY_INFO. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-13cifs: improve symlink handling for smb2+Paulo Alcantara14-453/+451
When creating inode for symlink, the client used to send below requests to fill it in: * create+query_info+close (STATUS_STOPPED_ON_SYMLINK) * create(+reparse_flag)+query_info+close (set file attrs) * create+ioctl(get_reparse)+close (query reparse tag) and then for every access to the symlink dentry, the ->link() method would send another: * create+ioctl(get_reparse)+close (parse symlink) So, in order to improve: (i) Get rid of unnecessary roundtrips and then resolve symlinks as follows: * create+query_info+close (STATUS_STOPPED_ON_SYMLINK + parse symlink + get reparse tag) * create(+reparse_flag)+query_info+close (set file attrs) (ii) Set the resolved symlink target directly in inode->i_link and use simple_get_link() for ->link() to simply return it. Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-13smb3: clarify multichannel warningSteve French1-1/+2
When server does not return network interfaces, clarify the message to indicate that "multichannel not available" not just that "empty network interface returned by server ..." Suggested-by: Tom Talpey <tom@talpey.com> Reviewed-by: Bharath SM <bharathsm@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-13cifs: fix regression in very old smb1 mountsRonnie Sahlberg1-6/+5
BZ: 215375 Fixes: 76a3c92ec9e0 ("cifs: remove support for NTLM and weaker authentication algorithms") Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-11cifs: fix skipping to incorrect offset in emit_cached_direntsRonnie Sahlberg1-6/+23
When application has done lseek() to a different offset on a directory fd we skipped one entry too many before we start emitting directory entries from the cache. We need to also make sure that when we are starting to emit directory entries from the cache, the ->pos sequence might have holes and skip some indices. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Tom Talpey <tom@talpey.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-10Merge tag '6.1-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds28-423/+439
Pull cifs updates from Steve French: - data corruption fix when cache disabled - four RDMA (smbdirect) improvements, including enabling support for SoftiWARP - four signing improvements - three directory lease improvements - four cleanup fixes - minor security fix - two debugging improvements * tag '6.1-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (21 commits) smb3: fix oops in calculating shash_setkey cifs: secmech: use shash_desc directly, remove sdesc smb3: rename encryption/decryption TFMs cifs: replace kfree() with kfree_sensitive() for sensitive data cifs: remove initialization value cifs: Replace a couple of one-element arrays with flexible-array members smb3: do not log confusing message when server returns no network interfaces smb3: define missing create contexts cifs: store a pointer to a fid in the cfid structure instead of the struct cifs: improve handlecaching cifs: Make tcon contain a wrapper structure cached_fids instead of cached_fid smb3: add dynamic trace points for tree disconnect Fix formatting of client smbdirect RDMA logging Handle variable number of SGEs in client smbdirect send. Reduce client smbdirect max receive segment size Decrease the number of SMB3 smbdirect client SGEs cifs: Fix the error length of VALIDATE_NEGOTIATE_INFO message cifs: destage dirty pages before re-reading them for cache=none cifs: return correct error in ->calc_signature() MAINTAINERS: Add Tom Talpey as cifs.ko reviewer ...
2022-10-10Merge tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds2-4/+5
Pull scheduler updates from Ingo Molnar: "Debuggability: - Change most occurances of BUG_ON() to WARN_ON_ONCE() - Reorganize & fix TASK_ state comparisons, turn it into a bitmap - Update/fix misc scheduler debugging facilities Load-balancing & regular scheduling: - Improve the behavior of the scheduler in presence of lot of SCHED_IDLE tasks - in particular they should not impact other scheduling classes. - Optimize task load tracking, cleanups & fixes - Clean up & simplify misc load-balancing code Freezer: - Rewrite the core freezer to behave better wrt thawing and be simpler in general, by replacing PF_FROZEN with TASK_FROZEN & fixing/adjusting all the fallout. Deadline scheduler: - Fix the DL capacity-aware code - Factor out dl_task_is_earliest_deadline() & replenish_dl_new_period() - Relax/optimize locking in task_non_contending() Cleanups: - Factor out the update_current_exec_runtime() helper - Various cleanups, simplifications" * tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits) sched: Fix more TASK_state comparisons sched: Fix TASK_state comparisons sched/fair: Move call to list_last_entry() in detach_tasks sched/fair: Cleanup loop_max and loop_break sched/fair: Make sure to try to detach at least one movable task sched: Show PF_flag holes freezer,sched: Rewrite core freezer logic sched: Widen TAKS_state literals sched/wait: Add wait_event_state() sched/completion: Add wait_for_completion_state() sched: Add TASK_ANY for wait_task_inactive() sched: Change wait_task_inactive()s match_state freezer,umh: Clean up freezer/initrd interaction freezer: Have {,un}lock_system_sleep() save/restore flags sched: Rename task_running() to task_on_cpu() sched/fair: Cleanup for SIS_PROP sched/fair: Default to false in test_idle_cores() sched/fair: Remove useless check in select_idle_core() sched/fair: Avoid double search on same cpu sched/fair: Remove redundant check in select_idle_smt() ...
2022-10-07smb3: fix oops in calculating shash_setkeySteve French1-2/+2
shash was not being initialized in one place in smb3_calc_signature and smb2_calc_signature Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de> Acked-by: Tom Talpey <tom@talpey.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-07cifs: secmech: use shash_desc directly, remove sdescEnzo Matsumiya7-166/+98
The struct sdesc is just a wrapper around shash_desc, with exact same memory layout. Replace the hashing TFMs with shash_desc as it's what's passed to the crypto API anyway. Also remove the crypto_shash pointers as they can be accessed via shash_desc->tfm (and are actually only used in the setkey calls). Adapt cifs_{alloc,free}_hash functions to this change. Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-07smb3: rename encryption/decryption TFMsEnzo Matsumiya4-16/+15
Detach the TFM name from a specific algorithm (AES-CCM) as AES-GCM is also supported, making the name misleading. s/ccmaesencrypt/enc/ s/ccmaesdecrypt/dec/ Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-07cifs: replace kfree() with kfree_sensitive() for sensitive dataEnzo Matsumiya7-29/+52
Replace kfree with kfree_sensitive, or prepend memzero_explicit() in other cases, when freeing sensitive material that could still be left in memory. Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de> Reported-by: kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/r/202209201529.ec633796-oliver.sang@intel.com Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-05cifs: remove initialization valueMuhammad Usama Anjum1-1/+1
Don't initialize the rc as its value is being overwritten before its use. Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-05cifs: Replace a couple of one-element arrays with flexible-array membersGustavo A. R. Silva2-4/+5
One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element arrays with flexible-array member in structs negotiate_req and extended_response, and refactor the rest of the code, accordingly. Also, make use of the DECLARE_FLEX_ARRAY() helper to declare flexible array member EncryptionKey in union u. This new helper allows for flexible-array members in unions. Change pointer notation to proper array notation in a call to memcpy() where flexible-array member DialectsArray is being used as destination argument. Important to mention is that doing a build before/after this patch results in no binary output differences. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/229 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1] Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-05smb3: do not log confusing message when server returns no network interfacesSteve French3-7/+20
Some servers can return an empty network interface list so, unless multichannel is requested, no need to log an error for this, and when multichannel is requested on mount but no interfaces, log something less confusing. For this case change parse_server_interfaces: malformed interface info to empty network interface list returned by server localhost Also do not relog this error every ten minutes (only log on mount, once) Cc: <stable@vger.kernel.org> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-05cifs: store a pointer to a fid in the cfid structure instead of the structRonnie Sahlberg2-9/+58
also create a constructor that takes a path name and stores it in the fid. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-05cifs: improve handlecachingRonnie Sahlberg1-4/+5
Only track the dentry for the root handle Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-05cifs: Make tcon contain a wrapper structure cached_fids instead of cached_fidRonnie Sahlberg4-29/+37
This wrapper structure will later be expanded to contain a list of fids that are cached and not just the root fid. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-05smb3: add dynamic trace points for tree disconnectSteve French15-38/+46
Needed this for debugging a failing xfstest. Also change camel case for "treeName" to "tree_name" in tcon struct. Example trace output (from "trace-cmd record -e smb3_tdis*"): umount-9718 [006] ..... 5909.780244: smb3_tdis_enter: xid=206 sid=0xcf38894e tid=0x3d0b8cf8 path=\\localhost\test umount-9718 [007] ..... 5909.780878: smb3_tdis_done: xid=206 sid=0xcf38894e tid=0x3d0b8cf8 Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-05Fix formatting of client smbdirect RDMA loggingTom Talpey1-7/+7
Make the debug logging more consistent in formatting of addresses, lengths, and bitfields. Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Tom Talpey <tom@talpey.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-05Handle variable number of SGEs in client smbdirect send.Tom Talpey1-108/+77
If/when an outgoing request contains more scatter/gather segments than can be mapped in a single RDMA send work request, use smbdirect fragments to send it in multiple packets. Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Tom Talpey <tom@talpey.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-05Reduce client smbdirect max receive segment sizeTom Talpey1-1/+1
Reduce client smbdirect max segment receive size to 1364 to match protocol norms. Larger buffers are unnecessary and add significant memory overhead. Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Tom Talpey <tom@talpey.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-05Decrease the number of SMB3 smbdirect client SGEsTom Talpey2-19/+21
The client-side SMBDirect layer requires no more than 6 send SGEs and 1 receive SGE. The previous default of 8 send and 8 receive causes smbdirect to fail on the SoftiWARP (siw) provider, and possibly others. Additionally, large numbers of SGEs reduces performance significantly on adapter implementations. Also correct the frmr page count comment (not an SGE count). Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Tom Talpey <tom@talpey.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.