| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Eventually support for NFSv2 in the Linux NFS server is to be
deprecated and then removed.
However, NFSv2 is the "always supported" version that is available
as soon as CONFIG_NFSD is set. Before NFSv2 support can be removed,
we need to choose a different "always supported" version.
This patch removes CONFIG_NFSD_V3 so that NFSv3 is always supported,
as NFSv2 is today. When NFSv2 support is removed, NFSv3 will become
the only "always supported" NFS version.
The defconfigs still need to be updated to remove CONFIG_NFSD_V3=y.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
It was an interesting idea but nobody seems to be using it, it's buggy
at this point, and nfs4state.c is already complicated enough without it.
The new nfsd/clients/ code provides some of the same functionality, and
could probably do more if desired.
This feature has been deprecated since 9d60d93198c6 ("Deprecate nfsd
fault injection").
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Currently, NFSv2/3 reads and writes have to open a file, do the read or
write and then close it again for each RPC. This is highly inefficient,
especially when the underlying filesystem has a relatively slow open
routine.
This patch adds a new open file cache to knfsd. Rather than doing an
open for each RPC, the read/write handlers can call into this cache to
see if there is one already there for the correct filehandle and
NFS_MAY_READ/WRITE flags.
If there isn't an entry, then we create a new one and attempt to
perform the open. If there is, then we wait until the entry is fully
instantiated and return it if it is at the end of the wait. If it's
not, then we attempt to take over construction.
Since the main goal is to speed up NFSv2/3 I/O, we don't want to
close these files on last put of these objects. We need to keep them
around for a little while since we never know when the next READ/WRITE
will come in.
Cache entries have a hardcoded 1s timeout, and we have a recurring
workqueue job that walks the cache and purges any entries that have
expired.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Richard Sharpe <richard.sharpe@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Have a simple flex file server where the mds (NFSv4.1 or NFSv4.2)
is also the ds (NFSv3). I.e., the metadata and the data file are
the exact same file.
This will allow testing of the flex file client.
Simply add the "pnfs" export option to your export
in /etc/exports and mount from a client that supports
flex files.
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
This is a simple extension to the block layout driver to use SCSI
persistent reservations for access control and fencing, as well as
SCSI VPD pages for device identification.
For this we need to pass the nfs4_client to the proc_getdeviceinfo method
to generate the reservation key, and add a new fence_client method
to allow for fence actions in the layout driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Split the config symbols into a generic pNFS one, which is invisible
and gets selected by the layout drivers, and one for the block layout
driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Add a small shim between core nfsd and filesystems to translate the
somewhat cumbersome pNFS data structures and semantics to something
more palatable for Linux filesystems.
Thanks to Rick McNeal for the old prototype pNFS blocklayout server
code, which gave a lot of inspiration to this version even if no
code is left from it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
For now just a few simple events to trace the layout stateid lifetime, but
these already were enough to find several bugs in the Linux client layout
stateid handling.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Add support for the GETDEVICEINFO, LAYOUTGET, LAYOUTCOMMIT and
LAYOUTRETURN NFSv4.1 operations, as well as backing code to manage
outstanding layouts and devices.
Layout management is very straight forward, with a nfs4_layout_stateid
structure that extends nfs4_stid to manage layout stateids as the
top-level structure. It is linked into the nfs4_file and nfs4_client
structures like the other stateids, and contains a linked list of
layouts that hang of the stateid. The actual layout operations are
implemented in layout drivers that are not part of this commit, but
will be added later.
The worst part of this commit is the management of the pNFS device IDs,
which suffers from a specification that is not sanely implementable due
to the fact that the device-IDs are global and not bound to an export,
and have a small enough size so that we can't store the fsid portion of
a file handle, and must never be reused. As we still do need perform all
export authentication and validation checks on a device ID passed to
GETDEVICEINFO we are caught between a rock and a hard place. To work
around this issue we add a new hash that maps from a 64-bit integer to a
fsid so that we can look up the export to authenticate against it,
a 32-bit integer as a generation that we can bump when changing the device,
and a currently unused 32-bit integer that could be used in the future
to handle more than a single device per export. Entries in this hash
table are never deleted as we can't reuse the ids anyway, and would have
a severe lifetime problem anyway as Linux export structures are temporary
structures that can go away under load.
Parts of the XDR data, structures and marshaling/unmarshaling code, as
well as many concepts are derived from the old pNFS server implementation
from Andy Adamson, Benny Halevy, Dean Hildebrand, Marc Eshel, Fred Isaman,
Mike Sager, Ricardo Labiaga and many others.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Fault injection on the NFS server makes it easier to test the client's
state manager and recovery threads. Simulating errors on the server is
easier than finding the right conditions that cause them naturally.
This patch uses debugfs to add a simple framework for fault injection to
the server. This framework is a config option, and can be enabled
through CONFIG_NFSD_FAULT_INJECTION. Assuming you have debugfs mounted
to /sys/debug, a set of files will be created in /sys/debug/nfsd/.
Writing to any of these files will cause the corresponding action and
write a log entry to dmesg.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
kbuild directly interprets <modulename>-y as objects to build into a module,
no need to assign it to the old foo-objs variable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
For the purposes of reboot recovery we keep a directory with subdirectories
each having a name that is the ascii hex representation of the md5 sum of a
client identifier for an active client.
This adds the code to calculate that name. We also use it for the purposes of
comparing clients, so if someone ever manages to find two client names that
are md5 collisions, then we'll return clid_inuse to the second.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This adds functions for encoding and decoding POSIX ACLs for the NFSACL
protocol extension, and the GETACL and SETACL RPCs. The implementation is
compatible with NFSACL in Solaris.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
|
Chuck Lever
J. Bruce Fields
Jeff Layton
Greg Kroah-Hartman
Tom Haynes
Christoph Hellwig
Bryan Schumaker
NeilBrown
Andreas Gruenbacher
Linus Torvalds