aboutsummaryrefslogtreecommitdiffstats
path: root/fs/udf/inode.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-09-11udf: replace ll_rw_block()Zhang Yi1-7/+1
ll_rw_block() is not safe for the sync read path because it cannot guarantee that submitting read IO if the buffer has been locked. We could get false positive EIO after wait_on_buffer() if the buffer has been locked by others. So stop using ll_rw_block(). We also switch to new bh_readahead_batch() helper for the buffer array readahead path. Link: https://lkml.kernel.org/r/20220901133505.2510834-11-yi.zhang@huawei.com Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-14fs/buffer: Combine two submit_bh() and ll_rw_block() argumentsBart Van Assche1-1/+1
Both submit_bh() and ll_rw_block() accept a request operation type and request flags as their first two arguments. Micro-optimize these two functions by combining these first two arguments into a single argument. This patch does not change the behavior of any of the modified code. Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jan Kara <jack@suse.cz> Acked-by: Song Liu <song@kernel.org> (for the md changes) Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220714180729.1065367-48-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-09fs: Convert mpage_readpage to mpage_read_folioMatthew Wilcox (Oracle)1-3/+3
mpage_readpage still works in terms of pages, and has not been audited for correctness with large folios, so include an assertion that the filesystem is not passing it large folios. Convert all the filesystems to call mpage_read_folio() instead of mpage_readpage(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-05-08fs: Remove flags parameter from aops->write_beginMatthew Wilcox (Oracle)1-1/+1
There are no more aop flags left, so remove the parameter. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
2022-05-08fs: Remove aop flags parameter from block_write_begin()Matthew Wilcox (Oracle)1-1/+1
There are no more aop flags left, so remove the parameter. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
2022-03-16fs: Convert __set_page_dirty_buffers to block_dirty_folioMatthew Wilcox (Oracle)1-1/+1
Convert all callers; mostly this is just changing the aops to point at it, but a few implementations need a little more work. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs Tested-by: David Howells <dhowells@redhat.com> # afs
2022-03-15fs: Turn block_invalidatepage into block_invalidate_folioMatthew Wilcox (Oracle)1-0/+1
Remove special-casing of a NULL invalidatepage, since there is no more block_invalidatepage. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs Tested-by: David Howells <dhowells@redhat.com> # afs
2022-01-24udf: Restore i_lenAlloc when inode expansion failsJan Kara1-0/+1
When we fail to expand inode from inline format to a normal format, we restore inode to contain the original inline formatting but we forgot to set i_lenAlloc back. The mismatch between i_lenAlloc and i_size was then causing further problems such as warnings and lost data down the line. Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com> CC: stable@vger.kernel.org Fixes: 7e49b6f2480c ("udf: Convert UDF to new truncate calling sequence") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2022-01-24udf: Fix NULL ptr deref when converting from inline formatJan Kara1-5/+3
udf_expand_file_adinicb() calls directly ->writepage to write data expanded into a page. This however misses to setup inode for writeback properly and so we can crash on inode->i_wb dereference when submitting page for IO like: BUG: kernel NULL pointer dereference, address: 0000000000000158 #PF: supervisor read access in kernel mode ... <TASK> __folio_start_writeback+0x2ac/0x350 __block_write_full_page+0x37d/0x490 udf_expand_file_adinicb+0x255/0x400 [udf] udf_file_write_iter+0xbe/0x1b0 [udf] new_sync_write+0x125/0x1c0 vfs_write+0x28e/0x400 Fix the problem by marking the page dirty and going through the standard writeback path to write the page. Strictly speaking we would not even have to write the page but we want to catch e.g. ENOSPC errors early. Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com> CC: stable@vger.kernel.org Fixes: 52ebea749aae ("writeback: make backing_dev_info host cgroup-specific bdi_writebacks") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2021-08-11udf: Get rid of 0-length arrays in struct fileIdentDescJan Kara1-2/+1
Get rid of 0-length arrays in struct fileIdentDesc. This requires a bit of cleaning up as the second variable length array in this structure is often used and the code abuses the fact that the first two arrays have the same type and offset in struct fileIdentDesc. Signed-off-by: Jan Kara <jack@suse.cz>
2021-06-29mm: require ->set_page_dirty to be explicitly wired upChristoph Hellwig1-0/+1
Remove the CONFIG_BLOCK default to __set_page_dirty_buffers and just wire that method up for the missing instances. [hch@lst.de: ecryptfs: add a ->set_page_dirty cludge] Link: https://lkml.kernel.org/r/20210624125250.536369-1-hch@lst.de Link: https://lkml.kernel.org/r/20210614061512.3966143-4-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Tyler Hicks <code@tyhicks.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-25udf: fix silent AED tagLocation corruptionSteven J. Magnani1-3/+6
When extending a file, udf_do_extend_file() may enter following empty indirect extent. At the end of udf_do_extend_file() we revert prev_epos to point to the last written extent. However if we end up not adding any further extent in udf_do_extend_file(), the reverting points prev_epos into the header area of the AED and following updates of the extents (in udf_update_extents()) will corrupt the header. Make sure that we do not follow indirect extent if we are not going to add any more extents so that returning back to the last written extent works correctly. Link: https://lore.kernel.org/r/20210107234116.6190-2-magnani@ieee.org Signed-off-by: Steven J. Magnani <magnani@ieee.org> Signed-off-by: Jan Kara <jack@suse.cz>
2020-09-29udf: Remove pointless union in udf_inode_infoJan Kara1-19/+17
We use only a single member out of the i_ext union in udf_inode_info. Just remove the pointless union. Signed-off-by: Jan Kara <jack@suse.cz>
2020-09-29udf: Avoid accessing uninitialized data on failed inode readJan Kara1-11/+14
When we fail to read inode, some data accessed in udf_evict_inode() may be uninitialized. Move the accesses to !is_bad_inode() branch. Reported-by: syzbot+91f02b28f9bb5f5f1341@syzkaller.appspotmail.com Signed-off-by: Jan Kara <jack@suse.cz>
2020-06-02fs: convert mpage_readpages to mpage_readaheadMatthew Wilcox (Oracle)1-4/+3
Implement the new readahead aop and convert all callers (block_dev, exfat, ext2, fat, gfs2, hpfs, isofs, jfs, nilfs2, ocfs2, omfs, qnx6, reiserfs & udf). The callers are all trivial except for GFS2 & OCFS2. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> # ocfs2 Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> # ocfs2 Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Gao Xiang <gaoxiang25@huawei.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Miklos Szeredi <mszeredi@redhat.com> Link: http://lkml.kernel.org/r/20200414150233.24495-17-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-08udf: Fix spelling in EXT_NEXT_EXTENT_ALLOCDESCSPali Rohár1-3/+3
Change EXT_NEXT_EXTENT_ALLOCDECS to proper spelling EXT_NEXT_EXTENT_ALLOCDESCS. Link: https://lore.kernel.org/r/20200107212904.30471-1-pali.rohar@gmail.com Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2019-08-27udf: augment UDF permissions on new inodesSteven J. Magnani1-4/+27
Windows presents files created within Linux as read-only, even when permissions in Linux indicate the file should be writable. UDF defines a slightly different set of basic file permissions than Linux. Specifically, UDF has "delete" and "change attribute" permissions for each access class (user/group/other). Linux has no equivalents for these. When the Linux UDF driver creates a file (or directory), no UDF delete or change attribute permissions are granted. The lack of delete permission appears to cause Windows to mark an item read-only when its permissions otherwise indicate that it should be read-write. Fix this by having UDF delete permissions track Linux write permissions. Also grant UDF change attribute permission to the owner when creating a new inode. Reported by: Ty Young Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Link: https://lore.kernel.org/r/20190827121359.9954-1-steve@digidescorp.com Signed-off-by: Jan Kara <jack@suse.cz>
2019-08-26udf: reduce leakage of blocks related to named streamsSteven J. Magnani1-1/+23
Windows is capable of creating UDF files having named streams. One example is the "Zone.Identifier" stream attached automatically to files downloaded from a network. See: https://msdn.microsoft.com/en-us/library/dn392609.aspx Modification of a file having one or more named streams in Linux causes the stream directory to become detached from the file, essentially leaking all blocks pertaining to the file's streams. Fix by saving off information about an inode's streams when reading it, for later use when its on-disk data is updated. Link: https://lore.kernel.org/r/20190814125002.10869-1-steve@digidescorp.com Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Jan Kara <jack@suse.cz>
2019-07-10udf: Fix incorrect final NOT_ALLOCATED (hole) extent lengthSteven J. Magnani1-33/+60
In some cases, using the 'truncate' command to extend a UDF file results in a mismatch between the length of the file's extents (specifically, due to incorrect length of the final NOT_ALLOCATED extent) and the information (file) length. The discrepancy can prevent other operating systems (i.e., Windows 10) from opening the file. Two particular errors have been observed when extending a file: 1. The final extent is larger than it should be, having been rounded up to a multiple of the block size. B. The final extent is not shorter than it should be, due to not having been updated when the file's information length was increased. [JK: simplified udf_do_extend_final_block(), fixed up some types] Fixes: 2c948b3f86e5 ("udf: Avoid IO in udf_clear_inode") CC: stable@vger.kernel.org Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Link: https://lore.kernel.org/r/1561948775-5878-1-git-send-email-steve@digidescorp.com Signed-off-by: Jan Kara <jack@suse.cz>
2019-03-18udf: Propagate errors from udf_truncate_extents()Jan Kara1-1/+3
Make udf_truncate_extents() properly propagate errors to its callers and let udf_setsize() handle the error properly as well. This lets userspace know in case there's some error when truncating blocks. Signed-off-by: Jan Kara <jack@suse.cz>
2018-12-12udf: Fix BUG on corrupted inodeJan Kara1-0/+6
When inode is corrupted so that extent type is invalid, some functions (such as udf_truncate_extents()) will just BUG. Check that extent type is valid when loading the inode to memory. Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-06-27udf: convert inode stamps to timespec64Arnd Bergmann1-29/+16
The VFS structures are finally converted to always use 64-bit timestamps, and this file system can represent a long range of on-disk timestamps already, so now let's fit in the missing bits for udf. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jan Kara <jack@suse.cz>
2018-06-20udf: Drop unused arguments of udf_delete_aext()Jan Kara1-4/+4
udf_delete_aext() uses its last two arguments only as local variables. Drop them. Signed-off-by: Jan Kara <jack@suse.cz>
2018-06-05vfs: change inode times to use struct timespec64Deepa Dinamani1-15/+28
struct timespec is not y2038 safe. Transition vfs to use y2038 safe struct timespec64 instead. The change was made with the help of the following cocinelle script. This catches about 80% of the changes. All the header file and logic changes are included in the first 5 rules. The rest are trivial substitutions. I avoid changing any of the function signatures or any other filesystem specific data structures to keep the patch simple for review. The script can be a little shorter by combining different cases. But, this version was sufficient for my usecase. virtual patch @ depends on patch @ identifier now; @@ - struct timespec + struct timespec64 current_time ( ... ) { - struct timespec now = current_kernel_time(); + struct timespec64 now = current_kernel_time64(); ... - return timespec_trunc( + return timespec64_trunc( ... ); } @ depends on patch @ identifier xtime; @@ struct \( iattr \| inode \| kstat \) { ... - struct timespec xtime; + struct timespec64 xtime; ... } @ depends on patch @ identifier t; @@ struct inode_operations { ... int (*update_time) (..., - struct timespec t, + struct timespec64 t, ...); ... } @ depends on patch @ identifier t; identifier fn_update_time =~ "update_time$"; @@ fn_update_time (..., - struct timespec *t, + struct timespec64 *t, ...) { ... } @ depends on patch @ identifier t; @@ lease_get_mtime( ... , - struct timespec *t + struct timespec64 *t ) { ... } @te depends on patch forall@ identifier ts; local idexpression struct inode *inode_node; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn_update_time =~ "update_time$"; identifier fn; expression e, E3; local idexpression struct inode *node1; local idexpression struct inode *node2; local idexpression struct iattr *attr1; local idexpression struct iattr *attr2; local idexpression struct iattr attr; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; @@ ( ( - struct timespec ts; + struct timespec64 ts; | - struct timespec ts = current_time(inode_node); + struct timespec64 ts = current_time(inode_node); ) <+... when != ts ( - timespec_equal(&inode_node->i_xtime, &ts) + timespec64_equal(&inode_node->i_xtime, &ts) | - timespec_equal(&ts, &inode_node->i_xtime) + timespec64_equal(&ts, &inode_node->i_xtime) | - timespec_compare(&inode_node->i_xtime, &ts) + timespec64_compare(&inode_node->i_xtime, &ts) | - timespec_compare(&ts, &inode_node->i_xtime) + timespec64_compare(&ts, &inode_node->i_xtime) | ts = current_time(e) | fn_update_time(..., &ts,...) | inode_node->i_xtime = ts | node1->i_xtime = ts | ts = inode_node->i_xtime | <+... attr1->ia_xtime ...+> = ts | ts = attr1->ia_xtime | ts.tv_sec | ts.tv_nsec | btrfs_set_stack_timespec_sec(..., ts.tv_sec) | btrfs_set_stack_timespec_nsec(..., ts.tv_nsec) | - ts = timespec64_to_timespec( + ts = ... -) | - ts = ktime_to_timespec( + ts = ktime_to_timespec64( ...) | - ts = E3 + ts = timespec_to_timespec64(E3) | - ktime_get_real_ts(&ts) + ktime_get_real_ts64(&ts) | fn(..., - ts + timespec64_to_timespec(ts) ,...) ) ...+> ( <... when != ts - return ts; + return timespec64_to_timespec(ts); ...> ) | - timespec_equal(&node1->i_xtime1, &node2->i_xtime2) + timespec64_equal(&node1->i_xtime2, &node2->i_xtime2) | - timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2) + timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2) | - timespec_compare(&node1->i_xtime1, &node2->i_xtime2) + timespec64_compare(&node1->i_xtime1, &node2->i_xtime2) | node1->i_xtime1 = - timespec_trunc(attr1->ia_xtime1, + timespec64_trunc(attr1->ia_xtime1, ...) | - attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2, + attr1->ia_xtime1 = timespec64_trunc(attr2->ia_xtime2, ...) | - ktime_get_real_ts(&attr1->ia_xtime1) + ktime_get_real_ts64(&attr1->ia_xtime1) | - ktime_get_real_ts(&attr.ia_xtime1) + ktime_get_real_ts64(&attr.ia_xtime1) ) @ depends on patch @ struct inode *node; struct iattr *attr; identifier fn; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; expression e; @@ ( - fn(node->i_xtime); + fn(timespec64_to_timespec(node->i_xtime)); | fn(..., - node->i_xtime); + timespec64_to_timespec(node->i_xtime)); | - e = fn(attr->ia_xtime); + e = fn(timespec64_to_timespec(attr->ia_xtime)); ) @ depends on patch forall @ struct inode *node; struct iattr *attr; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); fn (..., - &attr->ia_xtime, + &ts, ...); ) ...+> } @ depends on patch forall @ struct inode *node; struct iattr *attr; struct kstat *stat; identifier ia_xtime =~ "^ia_[acm]time$"; identifier i_xtime =~ "^i_[acm]time$"; identifier xtime =~ "^[acm]time$"; identifier fn, ret; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime); + &ts); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime); + &ts); | + ts = timespec64_to_timespec(stat->xtime); ret = fn (..., - &stat->xtime); + &ts); ) ...+> } @ depends on patch @ struct inode *node; struct inode *node2; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier i_xtime3 =~ "^i_[acm]time$"; struct iattr *attrp; struct iattr *attrp2; struct iattr attr ; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; struct kstat *stat; struct kstat stat1; struct timespec64 ts; identifier xtime =~ "^[acmb]time$"; expression e; @@ ( ( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1 ; | node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | stat->xtime = node2->i_xtime1; | stat1.xtime = node2->i_xtime1; | ( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1 ; | ( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2; | - e = node->i_xtime1; + e = timespec64_to_timespec( node->i_xtime1 ); | - e = attrp->ia_xtime1; + e = timespec64_to_timespec( attrp->ia_xtime1 ); | node->i_xtime1 = current_time(...); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | - node->i_xtime1 = e; + node->i_xtime1 = timespec_to_timespec64(e); ) Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: <anton@tuxera.com> Cc: <balbi@kernel.org> Cc: <bfields@fieldses.org> Cc: <darrick.wong@oracle.com> Cc: <dhowells@redhat.com> Cc: <dsterba@suse.com> Cc: <dwmw2@infradead.org> Cc: <hch@lst.de> Cc: <hirofumi@mail.parknet.co.jp> Cc: <hubcap@omnibond.com> Cc: <jack@suse.com> Cc: <jaegeuk@kernel.org> Cc: <jaharkes@cs.cmu.edu> Cc: <jslaby@suse.com> Cc: <keescook@chromium.org> Cc: <mark@fasheh.com> Cc: <miklos@szeredi.hu> Cc: <nico@linaro.org> Cc: <reiserfs-devel@vger.kernel.org> Cc: <richard@nod.at> Cc: <sage@redhat.com> Cc: <sfrench@samba.org> Cc: <swhiteho@redhat.com> Cc: <tj@kernel.org> Cc: <trond.myklebust@primarydata.com> Cc: <tytso@mit.edu> Cc: <viro@zeniv.linux.org.uk>
2018-05-25udf: Simplify calls to udf_disk_stamp_to_timeDeepa Dinamani1-21/+7
Subsequent patches in the series convert inode timestamps to use struct timespec64 instead of struct timespec as part of solving the y2038 problem. commit fd3cfad374d4 ("udf: Convert udf_disk_stamp_to_time() to use mktime64()") eliminated the NULL return condition from udf_disk_stamp_to_time(). udf_time_to_disk_time() is always called with a valid dest pointer and the return value is ignored. Further, caller can as well check the dest pointer being passed in rather than return argument. Make both the functions return void. This will make the inode timestamp conversion simpler. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: jack@suse.com ---- Changes from v1: * fixed the pointer error pointed by Jan
2018-02-27udf: Clean up handling of invalid uid/gidJan Kara1-8/+13
Current code relies on the fact that invalid uid/gid as defined by UDF 2.60 3.3.3.1 and 3.3.3.2 coincides with invalid uid/gid as used by the user namespaces implementation. Since this is only lucky coincidence, clean this up to avoid future surprises in case user namespaces implementation changes. Also this is more robust in presence of valid (from UDF point of view) uids / gids which do not map into current user namespace. Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-02-27udf: Ignore [ug]id=ignore mount optionsJan Kara1-2/+0
Currently uid=ignore and gid=ignore make no sense without uid=<number> and gid=<number> respectively as they result in all files having invalid uid / gid which then doesn't allow even root to modify files and thus causes confusion. And since commit ca76d2d8031f "UDF: fix UID and GID mount option ignorance" (from over 10 years ago) uid=<number> overrides all uids on disk as uid=ignore does. So just silently ignore uid=ignore mount option. Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2017-10-17udf: Fix some sign-conversion warningsSteve Magnani1-2/+2
Fix some warnings that appear when compiling with -Wconversion. A sub-optimal choice of variable type leads to warnings about conversion in both directions between unsigned and signed. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Jan Kara <jack@suse.cz>
2017-10-17udf: Fix signed/unsigned format specifiersSteve Magnani1-8/+8
Fix problems noted in compilion with -Wformat=2 -Wformat-signedness. In particular, a mismatch between the signedness of a value and the signedness of its format specifier can result in unsigned values being printed as negative numbers, e.g.: Partition (0 type 1511) starts at physical 460, block length -1779968542 ...which occurs when mounting a large (> 1 TiB) UDF partition. Changes since V1: * Fixed additional issues noted in udf_bitmap_free_blocks(), udf_get_fileident(), udf_show_options() Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Jan Kara <jack@suse.cz>
2017-10-17udf: Fix 64-bit sign extension issues affecting blocks > 0x7FFFFFFFSteve Magnani1-15/+15
Large (> 1 TiB) UDF filesystems appear subject to several problems when mounted on 64-bit systems: * readdir() can fail on a directory containing File Identifiers residing above 0x7FFFFFFF. This manifests as a 'ls' command failing with EIO. * FIBMAP on a file block located above 0x7FFFFFFF can return a negative value. The low 32 bits are correct, but applications that don't mask the high 32 bits of the result can perform incorrectly. Per suggestion by Jan Kara, introduce a udf_pblk_t type for representation of UDF block addresses. Ultimately, all driver functions that manipulate UDF block addresses should use this type; for now, deployment is limited to functions with actual or potential sign extension issues. Changes to udf_readdir() and udf_block_map() address the issues noted above; other changes address potential similar issues uncovered during audit of the driver code. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Jan Kara <jack@suse.cz>
2017-08-16fs-udf: Delete an error message for a failed memory allocation in two functionsMarkus Elfring1-6/+1
Omit an extra message for a memory allocation failure in these functions. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Jan Kara <jack@suse.cz>
2017-08-16fs-udf: Improve six size determinationsMarkus Elfring1-3/+3
Replace the specification of data structures by variable references as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Jan Kara <jack@suse.cz>
2017-06-14udf: Fix deadlock between writeback and udf_setsize()Jan Kara1-2/+2
udf_setsize() called truncate_setsize() with i_data_sem held. Thus truncate_pagecache() called from truncate_setsize() could lock a page under i_data_sem which can deadlock as page lock ranks below i_data_sem - e. g. writeback can hold page lock and try to acquire i_data_sem to map a block. Fix the problem by moving truncate_setsize() calls from under i_data_sem. It is safe for us to change i_size without holding i_data_sem as all the places that depend on i_size being stable already hold inode_lock. CC: stable@vger.kernel.org Fixes: 7e49b6f2480cb9a9e7322a91592e56a5c85361f5 Signed-off-by: Jan Kara <jack@suse.cz>
2017-04-24udf: use kmap_atomic for memcpy copyingFabian Frederick1-4/+4
Use temporary mapping for memory copying operations. To avoid any sleeping problem, mark_inode_dirty(inode) was moved after kunmap() in udf_adinicb_readpage() down_write(&iinfo->i_data_sem) set before kmap_atomic() in udf_expand_file_adinicb() Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2017-04-24udf: use octal for permissionsFabian Frederick1-7/+7
According to commit f90774e1fd27 ("checkpatch: look for symbolic permissions and suggest octal instead") Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2017-02-27fs: add i_blocksize()Fabian Frederick1-1/+1
Replace all 1 << inode->i_blkbits and (1 << inode->i_blkbits) in fs branch. This patch also fixes multiple checkpatch warnings: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' Thanks to Andrew Morton for suggesting more appropriate function instead of macro. [geliangtang@gmail.com: truncate: use i_blocksize()] Link: http://lkml.kernel.org/r/9c8b2cd83c8f5653805d43debde9fa8817e02fc4.1484895804.git.geliangtang@gmail.com Link: http://lkml.kernel.org/r/1481319905-10126-1-git-send-email-fabf@skynet.be Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-10udf: check partition reference in udf_read_inode()Fabian Frederick1-0/+6
We were checking block number without checking partition. sbi->s_partmaps[iloc->partitionReferenceNum] could lead to bad memory access. See udf_nfs_get_inode() path for instance. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2017-01-10udf: merge module informations in super.cFabian Frederick1-4/+0
Move all module attributes at the end of one file like other FS. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2017-01-10udf: remove next_epos from udf_update_extent_cache()Fabian Frederick1-14/+11
udf_update_extent_cache() is only called from inode_bmap() with 1 for next_epos Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2017-01-10udf: Factor out trimming of crtimeFabian Frederick1-14/+11
Factor out trimming of crtime field. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2017-01-10udf: remove unneeded line breakFabian Frederick1-2/+1
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2017-01-10udf: merge bh freeFabian Frederick1-18/+10
Merge all bh free at one place. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2017-01-10udf: use pointer for kernel_long_ad argumentFabian Frederick1-14/+9
Having struct kernel_long_ad laarr[EXTENT_MERGE_SIZE] in all function arguments could be understood as by-value parameter. Use kernel_long_ad pointer for functions depending on inode_getblk() Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2017-01-05udf: Make stat on symlink report symlink length as st_sizeJan Kara1-1/+1
UDF encodes symlinks in a more complex fashion and thus i_size of a symlink does not match the lenght of a string returned by readlink(2). This confuses some applications (see bug 191241) and may be considered a violation of POSIX. Fix the problem by reading the link into page cache in response to stat(2) call and report the length of the decoded path. Signed-off-by: Jan Kara <jack@suse.cz>
2017-01-03fs/udf: make #ifdef UDF_PREALLOCATE unconditionalSteve Kenton1-2/+0
Signed-off-by: Steve Kenton <skenton@ou.edu> Signed-off-by: Jan Kara <jack@suse.cz>
2016-11-01block,fs: untangle fs.h and blk_types.hChristoph Hellwig1-0/+1
Nothing in fs.h should require blk_types.h to be included. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-27fs: Replace current_fs_time() with current_time()Deepa Dinamani1-2/+2
current_fs_time() uses struct super_block* as an argument. As per Linus's suggestion, this is changed to take struct inode* as a parameter instead. This is because the function is primarily meant for vfs inode timestamps. Also the function was renamed as per Arnd's suggestion. Change all calls to current_fs_time() to use the new current_time() function instead. current_fs_time() will be deleted. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-06-07fs: have ll_rw_block users pass in op and flags separatelyMike Christie1-1/+1
This has ll_rw_block users pass in the operation and flags separately, so ll_rw_block can setup the bio op and bi_rw flags on the bio that is submitted. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-01direct-io: eliminate the offset argument to ->direct_IOChristoph Hellwig1-4/+3
Including blkdev_direct_IO and dax_do_io. It has to be ki_pos to actually work, so eliminate the superflous argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov1-2/+2
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.