| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When we're servicing an INUMBERS or BULKSTAT request or running
quotacheck, grab an empty transaction so that we can use its inherent
recursive buffer locking abilities to detect inode btree cycles without
hitting ABBA buffer deadlocks. This patch requires the deferred inode
inactivation patchset because xfs_irele cannot directly call
xfs_inactive when the iwalk itself has an (empty) transaction.
Found by fuzzing an inode btree pointer to introduce a cycle into the
tree (xfs/365).
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
Rather than manually walking the ags and passing agnunbers around,
pass the perag for the AG we are currently working on around in the
iwalk structure.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
Increase the parallelism level for pwork clients to the workqueue
defaults so that we can take advantage of computers with a lot of CPUs
and a lot of hardware. On fast systems this will speed up quotacheck by
a large factor, and the following posteof/cowblocks cleanup series will
use the functionality presented in this patch to run garbage collection
as quickly as possible.
We do this by switching the pwork workqueue to unbounded, since the
current user (quotacheck) runs lengthy scans for each work item and we
don't care about dispatching the work on a warm cpu cache or anything
like that. Also set WQ_SYSFS so that we can monitor where the wq is
running.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
In commit 27c14b5daa82 we started tracking the last inode seen during an
inode walk to avoid infinite loops if a corrupt inobt record happens to
have a lower ir_startino than the record preceeding it. Unfortunately,
the assertion trips over the case where there are completely empty inobt
records (which can happen quite easily on 64k page filesystems) because
we advance the tracking cursor without actually putting the empty record
into the processing buffer. Fix the assert to allow for this case.
Reported-by: zlang@redhat.com
Fixes: 27c14b5daa82 ("xfs: ensure inobt record walks always make forward progress")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
The aim of the inode btree record iterator function is to call a
callback on every record in the btree. To avoid having to tear down and
recreate the inode btree cursor around every callback, it caches a
certain number of records in a memory buffer. After each batch of
callback invocations, we have to perform a btree lookup to find the
next record after where we left off.
However, if the keys of the inode btree are corrupt, the lookup might
put us in the wrong part of the inode btree, causing the walk function
to loop forever. Therefore, we add extra cursor tracking to make sure
that we never go backwards neither when performing the lookup nor when
jumping to the next inobt record. This also fixes an off by one error
where upon resume the lookup should have been for the inode /after/ the
point at which we stopped.
Found by fuzzing xfs/460 with keys[2].startino = ones causing bulkstat
and quotacheck to hang.
Fixes: a211432c27ff ("xfs: create simplified inode walk function")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
|
|
The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the
creation of local variables and redirections of the code flow. This is
pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that
remove both of those ugly points. The change was performed with the
following coccinelle script:
@@
expression mp, test;
identifier label;
@@
- XFS_WANT_CORRUPTED_GOTO(mp, test, label);
+ if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; }
@@
expression mp, test;
@@
- XFS_WANT_CORRUPTED_RETURN(mp, test);
+ if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED;
@@
expression mp, lval, rval;
@@
- XFS_IS_CORRUPT(mp, !(lval == rval))
+ XFS_IS_CORRUPT(mp, lval != rval)
@@
expression mp, e1, e2;
@@
- XFS_IS_CORRUPT(mp, !(e1 && e2))
+ XFS_IS_CORRUPT(mp, !e1 || !e2)
@@
expression e1, e2;
@@
- !(e1 == e2)
+ e1 != e2
@@
expression e1, e2, e3, e4, e5, e6;
@@
- !(e1 == e2 && e3 == e4) || e5 != e6
+ e1 != e2 || e3 != e4 || e5 != e6
@@
expression e1, e2, e3, e4, e5, e6;
@@
- !(e1 == e2 || (e3 <= e4 && e5 <= e6))
+ e1 != e2 && (e3 > e4 || e5 > e6)
@@
expression mp, e1, e2;
@@
- XFS_IS_CORRUPT(mp, !(e1 <= e2))
+ XFS_IS_CORRUPT(mp, e1 > e2)
@@
expression mp, e1, e2;
@@
- XFS_IS_CORRUPT(mp, !(e1 < e2))
+ XFS_IS_CORRUPT(mp, e1 >= e2)
@@
expression mp, e1;
@@
- XFS_IS_CORRUPT(mp, !!e1)
+ XFS_IS_CORRUPT(mp, e1)
@@
expression mp, e1, e2;
@@
- XFS_IS_CORRUPT(mp, !(e1 || e2))
+ XFS_IS_CORRUPT(mp, !e1 && !e2)
@@
expression mp, e1, e2, e3, e4;
@@
- XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4))
+ XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4)
@@
expression mp, e1, e2, e3, e4;
@@
- XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4))
+ XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4)
@@
expression mp, e1, e2, e3, e4;
@@
- XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4))
+ XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4)
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Use -ECANCELED to signal "stop iterating" instead of these magical
*_ITER_ABORT values, since it's duplicative.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Since no caller is using KM_NOSLEEP and no callee branches on KM_SLEEP,
we can remove KM_NOSLEEP and replace KM_SLEEP with 0.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Add a new xfs_bulk_ireq flag to constrain the iteration to a single AG.
If the passed-in startino value is zero then we start with the first
inode in the AG that the user passes in; otherwise, we iterate only
within the same AG as the passed-in inode.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Create a pwork destroy function that uses polling instead of
uninterruptible sleep to wait for work items to finish so that we can
touch the softlockup watchdog. IOWs, gross hack.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Create a parallel iwalk implementation and switch quotacheck to use it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Refactor xfs_iwalk_ag_start and xfs_iwalk_ag so that the bits that are
particular to bulkstat (trimming the start irec, starting inode
readahead, and skipping empty groups) can be controlled via flags in the
iwag structure.
This enables us to add a new function to walk all inobt records which
will be used for the new INUMBERS implementation in the next patch.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
In preparation for reusing the iwalk code for the inogrp walking code
(aka INUMBERS), move the initial inobt lookup and retrieval code out of
xfs_iwalk_grab_ichunk so that we call the masking code only when we need
to trim out the inodes that came before the cursor in the inobt record
(aka BULKSTAT).
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Refactor xfs_iwalk_ichunk_ra to avoid long conditionals.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Now that the inode chunk grabbing function is a static function in the
iwalk code, change its behavior so that @agino is the inode where we
want to /start/ the iteration. This reduces cognitive friction with the
callers and simplifes the code.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Now that we've reworked the bulkstat code to use iwalk, we can move the
old bulkstat ichunk helpers to xfs_iwalk.c. No functional changes here.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
The existing inode walk prefetch is based on the old bulkstat code,
which simply allocated 4 pages worth of memory and prefetched that many
inobt records, regardless of however many inodes the caller requested.
65536 inodes is a lot to prefetch (~32M on x64, ~512M on arm64) so let's
scale things down a little more intelligently based on the number of
inodes requested, etc.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Create a new iterator function to simplify walking inodes in an XFS
filesystem. This new iterator will replace the existing open-coded
walking that goes on in various places.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
Darrick J. Wong
Dave Chinner
Darrick J. Wong
Tetsuo Handa