| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add kernel_param_ops and callbacks to use a class-map to validate and
apply input to a sysfs-node, which allows users to control classes
defined in that class-map. This supports uses like:
echo 0x3 > /sys/module/drm/parameters/debug
IE add these:
- int param_set_dyndbg_classes()
- int param_get_dyndbg_classes()
- struct kernel_param_ops param_ops_dyndbg_classes
Following the model of kernel/params.c STANDARD_PARAM_DEFS, these are
non-static and exported. This might be unnecessary here.
get/set use an augmented kernel_param; the arg refs a new struct
ddebug_class_param, which contains:
- A ptr to user's state-store; a union of &ulong for drm.debug, &int
for nouveau level debug. By ref'g the client's bit-state _var, code
coordinates with existing code (like drm_debug_enabled) which uses
it, so existing/remaining calls can work unchanged. Changing
drm.debug to a ulong allows use of BIT() etc.
- FLAGS: dyndbg.flags toggled by changes to bitmap. Usually just "p".
- MAP: a pointer to struct ddebug_classes_map, which maps those
class-names to .class_ids 0..N that the module is using. This
class-map is declared & initialized by DECLARE_DYNDBG_CLASSMAP.
- map-type: 4 enums DD_CLASS_TYPE_* select 2 input forms and 2 meanings.
numeric input:
DD_CLASS_TYPE_DISJOINT_BITS integer input, independent bits. ie: drm.debug
DD_CLASS_TYPE_LEVEL_NUM integer input, 0..N levels
classnames-list (comma separated) input:
DD_CLASS_TYPE_DISJOINT_NAMES each name affects a bit, others preserved
DD_CLASS_TYPE_LEVEL_NAMES names have level meanings, like kern_levels.h
_NAMES - comma-separated classnames (with optional +-)
_NUM - numeric input, 0-N expected
_BITS - numeric input, 0x1F bitmap form expected
_DISJOINT - bits are independent
_LEVEL - (x<y) on bit-pos.
_DISJOINT treats input like a bit-vector (ala drm.debug), and sets
each bit accordingly. LEVEL is layered on top of this.
_LEVEL treats input like a bit-pos:N, then sets bits(0..N)=1, and
bits(N+1..max)=0. This applies (bit<N) semantics on top of disjoint
bits.
USAGES:
A potentially typical _DISJOINT_NAMES use:
echo +DRM_UT_CORE,+DRM_UT_KMS,-DRM_UT_DRIVER,-DRM_UT_ATOMIC \
> /sys/module/drm/parameters/debug_catnames
A naive _LEVEL_NAMES use, with one class, that sets all in the
class-map according to (x<y):
: problem seen
echo +L7 > /sys/module/test_dynamic_debug/parameters/p_level_names
: problem solved
echo -L1 > /sys/module/test_dynamic_debug/parameters/p_level_names
Note this artifact:
: this is same as prev cmd (due to +/-)
echo L0 > /sys/module/test_dynamic_debug/parameters/p_level_names
: this is "even-more" off, but same wo __pr_debug_class(L0, "..").
echo -L0 > /sys/module/test_dynamic_debug/parameters/p_level_names
A stress-test/make-work usage (kid toggling a light switch):
echo +L7,L0,L7,L0,L7,L0,L7,L0,L7,L0,L7,L0,L7 \
> /sys/module/test_dynamic_debug/parameters/p_level_names
ddebug_apply_class_bitmap(): inside-fn, works on bitmaps, receives
new-bits, finds diffs vs client-bitvector holding "current" state,
and issues exec_query to commit the adjustment.
param_set_dyndbg_classes(): interface fn, sends _NAMES to
param_set_dyndbg_classnames() and returns, falls thru to handle _BITS,
_NUM internally, and calls ddebug_apply_class_bitmap(). Finishes by
updating state.
param_set_dyndbg_classnames(): handles classnames-list in loop, calls
ddebug_apply_class_bitmap for each, then updates state.
NOTES:
_LEVEL_ is overlay on _DISJOINT_; inputs are converted to a bitmask,
by the callbacks. IOW this is possible, and possibly confusing:
echo class V3 +p > control
echo class V1 -p > control
IMO thats ok, relative verbosity is an interface property.
_LEVEL_NUM maps still need class-names, even though the names are not
usable at the sysfs interface (unlike with _NAMES style). The names
are the only way to >control the classes.
- It must have a "V0" name,
something below "V1" to turn "V1" off.
__pr_debug_cls(V0,..) is printk, don't do that.
- "class names" is required at the >control interface.
- relative levels are not enforced at >control
_LEVEL_NAMES bear +/- signs, which alters the on-bit-pos by 1. IOW,
+L2 means L0,L1,L2, and -L2 means just L0,L1. This kinda spoils the
readback fidelity, since the L0 bit gets turned on by any use of any
L*, except "-L0".
All the interface uncertainty here pertains to the _NAMES features.
Nobody has actually asked for this, so its practical (if a little
tedious) to split it out.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-21-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add __dyndbg_classes section, using __dyndbg as a model. Use it:
vmlinux.lds.h:
KEEP the new section, which also silences orphan section warning on
loadable modules. Add (__start_/__stop_)__dyndbg_classes linker
symbols for the c externs (below).
kernel/module/main.c:
- fill new fields in find_module_sections(), using section_objs()
- extend callchain prototypes
to pass classes, length
load_module(): pass new info to dynamic_debug_setup()
dynamic_debug_setup(): new params, pass through to ddebug_add_module()
dynamic_debug.c:
- add externs to the linker symbols.
ddebug_add_module():
- It currently builds a debug_table, and *will* find and attach classes.
dynamic_debug_init():
- add class fields to the _ddebug_info cursor var: di.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-16-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Using DECLARE_DYNDBG_CLASSMAP, modules can declare up to 31 classnames.
By doing so, they authorize dyndbg to manipulate class'd prdbgs (ie:
__pr_debug_cls, and soon drm_*dbg), ala::
:#> echo class DRM_UT_KMS +p > /proc/dynamic_debug/control
The macro declares and initializes a static struct ddebug_class_map::
- maps approved class-names to class_ids used in module,
by array order. forex: DRM_UT_*
- class-name vals allow validation of "class FOO" queries
using macro is opt-in
- enum class_map_type - determines interface, behavior
Each module has its own class-type and class_id space, and only known
class-names will be authorized for a manipulation. Only DRM modules
should know and respont to this:
:#> echo class DRM_UT_CORE +p > control # across all modules
pr_debugs (with default class_id) are still controllable as before.
DECLARE_DYNDBG_CLASSMAP(_var, _maptype, _base, classes...) is::
_var: name of the static struct var. user passes to module_param_cb()
if they want a sysfs node.
_maptype: this is hard-coded to DD_CLASS_TYPE_DISJOINT_BITS for now.
_base: usually 0, it allows splitting 31 classes into subranges, so
that multiple classes / sysfs-nodes can share the module's
class-id space.
classes: list of class_name strings, these are mapped to class-ids
starting at _base. This class-names list must have a
corresponding ENUM, with SYMBOLS that match the literals,
and 1st enum val = _base.
enum class_map_type has 4 values, on 2 factors::
- classes are disjoint/independent vs relative/x<y/verbosity.
disjoint is basis, verbosity by overlay.
- input NUMBERS vs [+-]CLASS_NAMES
uints, ideally hex. vs +DRM_UT_CORE,-DRM_UT_KMS
DD_CLASS_TYPE_DISJOINT_BITS: classes are separate, one per bit.
expecting hex input. built for drm.debug, basis for other types.
DD_CLASS_TYPE_DISJOINT_NAMES: input is a CSV of [+-]CLASS_NAMES,
classes are independent, like DISJOINT
DD_CLASS_TYPE_LEVEL_NUM: input is numeric level, 0-N.
0 implies silence. use printk to break that.
relative levels applied on bitmaps.
DD_CLASS_TYPE_LEVEL_NAMES: input is a CSV of [+-]CLASS_NAMES,
names like: ERR,WARNING,NOTICE,INFO,DEBUG
avoiding EMERG,ALERT,CRIT,ERR - no point.
NOTES:
The macro places the initialized struct ddebug_class_map into the
__dyndbg_classes section. That draws an 'orphan' warning which we
handle in the next commit. The struct attributes are necessary:
__aligned(8) fixed null-ptr derefs, and __used is needed by drm
drivers, which declare class-maps, but don't also declare a
sysfs-param, and thus dont ref the classmap. The __used insures that
the linkage is made, then the class-map is found at load-time.
While its possible to handle both NAMES and NUMBERS in the same
sys-interface, there is ambiguity to avoid, by disallowing them
together. Later, if ambiguities are resolved, 2 new enums can permit
both inputs, on verbose & independent types separately, and authors
can select the interface style they like.
The plan is to implement LEVELS in the callbacks, outside of
ddebug_exec_query(), which for simplicity will treat the CLASSES in
the map as disjoint. The callbacks can see map-type, and apply ++/--
loops (or bitops) to force the relative meanings across the
class-bitmap.
RFC: That leaves 2 issues:
1. doing LEVELs in callbacks means that the native >control interface
doesn't enforce the LEVELS relationship, so you could confusingly have
V3 enabled, but V1 disabled. OTOH, the control iface already allows
infinite tweaking of the underlying callsites; sysfs node readback can
only tell the user what they previously wrote.
2. All dyndbg >control reduces to a query/command, includes +/-, which
is at-root a kernel patching operation with +/- semantics. And the
_NAMES handling exposes it to the user, making it API-adjacent.
And its not just >control where +/- gets used (which is settled), the
new place is with sysfs-nodes exposing _*_NAMES classes, and here its
subtly different.
_DISJOINT_NAMES: is simple, independent
_LEVEL_NAMES: masks-on bits 0 .. N-1, N..max off
# turn on L3,L2,L1 others off
echo +L3 > /sys/module/test_dynamic_debug/parameters/p_level_names
# turn on L2,L1 others off
echo -L3 > /sys/module/test_dynamic_debug/parameters/p_level_names
IOW, the - changes the threshold-on bitpos by 1.
Alternatively, we could treat the +/- as half-duplex, where -L3 turns
off L>2 (and ignores L1), and +L2 would turn on L<=2 (and ignore others).
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-15-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For selftest purposes, add __pr_debug_cls(class, fmt, ...)
I didn't think we'd need to define this, since DRM effectively has it
already in drm_dbg, drm_devdbg. But test_dynamic_debug needs it in
order to demonstrate all the moving parts.
Note the __ prefix; its not intended for general use, at least until a
need emerges. ISTM the drm.debug model (macro wrappers inserting enum
const 1st arg) is the baseline approach.
That said, nouveau might want it for easy use in its debug macros. TBD.
NB: it does require a builtin-constant class, __pr_debug_cls(i++, ...)
is disallowed by compiler.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-14-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
DRM issues ~10 exclusive categories of debug messages; to represent
this directly in dyndbg, add a new 6-bit field: struct _ddebug.class_id.
This gives us 64 classes, which should be more than enough.
#> echo 0x012345678 > /sys/module/drm/parameters/debug
All existing callsites are initialized with _DPRINTK_CLASS_DFLT, which
is 2^6-1. This reserves 0-62 for use in new categorized/class'd
pr_debugs, which fits perfectly with natural enums (ints: 0..N).
Thats done by extending the init macro: DEFINE_DYNAMIC_DEBUG_METADATA()
with _CLS(cls, ...) suffix, and redefing old name using extended name.
Then extend the factory macro callchain with _cls() versions to provide
the callsite.class_id, with old-names passing _DPRINTK_CLASS_DFLT.
This sets us up to create class'd prdebug callsites (class'd callsites
are those with .class_id != _DPRINTK_CLASS_DFLT).
No behavior change.
cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-13-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This new struct composes the linker provided (vector,len) section,
and provides a place to add other __dyndbg[] state-data later:
descs - the vector of descriptors in __dyndbg section.
num_descs - length of the data/section.
Use it, in several different ways, as follows:
In lib/dynamic_debug.c:
ddebug_add_module(): Alter params-list, replacing 2 args (array,index)
with a struct _ddebug_info * containing them both, with room for
expansion. This helps future-proof the function prototype against the
looming addition of class-map info into the dyndbg-state, by providing
a place to add more member fields later.
NB: later add static struct _ddebug_info builtins_state declaration,
not needed yet.
ddebug_add_module() is called in 2 contexts:
In dynamic_debug_init(), declare, init a struct _ddebug_info di
auto-var to use as a cursor. Then iterate over the prdbg blocks of
the builtin modules, and update the di cursor before calling
_add_module for each.
Its called from kernel/module/main.c:load_info() for each loaded
module:
In internal.h, alter struct load_info, replacing the dyndbg array,len
fields with an embedded _ddebug_info containing them both; and
populate its members in find_module_sections().
The 2 calling contexts differ in that _init deals with contiguous
subranges of __dyndbgs[] section, packed together, while loadable
modules are added one at a time.
So rename ddebug_add_module() into outer/__inner fns, call __inner
from _init, and provide the offset into the builtin __dyndbgs[] where
the module's prdbgs reside. The cursor provides start, len of the
subrange for each. The offset will be used later to pack the results
of builtin __dyndbg_sites[] de-duplication, and is 0 and unneeded for
loadable modules,
Note:
kernel/module/main.c includes <dynamic_debug.h> for struct
_ddeubg_info. This might be prone to include loops, since its also
included by printk.h. Nothing has broken in robot-land on this.
cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-12-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This exported fn is unused, and will not be needed. Lets dump it.
The export was added to let drm control pr_debugs, as part of using
them to avoid drm_debug_enabled overheads. But its better to just
implement the drm.debug bitmap interface, then its available for
everyone.
Fixes: a2d375eda771 ("dyndbg: refine export, rename to dynamic_debug_exec_queries()")
Fixes: 4c0d77828d4f ("dyndbg: export ddebug_exec_queries")
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-10-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For CONFIG_DYNAMIC_DEBUG=N, the ddebug_dyndbg_module_param_cb()
stub-fn is too permissive:
bash-5.1# modprobe drm JUNKdyndbg
bash-5.1# modprobe drm dyndbgJUNK
[ 42.933220] dyndbg param is supported only in CONFIG_DYNAMIC_DEBUG builds
[ 42.937484] ACPI: bus type drm_connector registered
This caused no ill effects, because unknown parameters are either
ignored by default with an "unknown parameter" warning, or ignored
because dyndbg allows its no-effect use on non-dyndbg builds.
But since the code has an explicit feedback message, it should be
issued accurately. Fix with strcmp for exact param-name match.
Fixes: b48420c1d301 dynamic_debug: make dynamic-debug work for module initialization
Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-3-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Wrap function in a static-inline one, which checks flags to avoid
calling the function unnecessarily.
And hoist its output-buffer initialization to the grand-caller, which
is already allocating the buffer on the stack, and can trivially
initialize it too.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20210504222235.1033685-2-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
commit 4c0d77828d4f ("dyndbg: export ddebug_exec_queries") had a few
problems:
- broken non DYNAMIC_DEBUG_CORE configs, sparse warning
- the exported function modifies query string, breaks on RO strings.
- func name follows internal convention, shouldn't be exposed as is.
1st is fixed in header with ifdefd function prototype or stub defn.
Also remove an obsolete HAVE-symbol ifdef-comment, and add others.
Fix others by wrapping existing internal function with a new one,
named in accordance with module-prefix naming convention, before
export hits v5.9.0. In new function, copy query string to a local
buffer, so users can pass hard-coded/RO queries, and internal function
can be used unchanged.
Fixes: 4c0d77828d4f ("dyndbg: export ddebug_exec_queries")
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200831182210.850852-3-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dyndbg populates its callsite info into __verbose section, change that
to a more specific and descriptive name, __dyndbg.
Also, per checkpatch:
simplify __attribute(..) to __section(__dyndbg) declaration.
and 1 spelling fix, decriptor
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-6-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Instead of enabling dynamic debug globally with CONFIG_DYNAMIC_DEBUG,
CONFIG_DYNAMIC_DEBUG_CORE will only enable core function of dynamic
debug. With the DYNAMIC_DEBUG_MODULE defined for any modules, dynamic
debug will be tied to them.
This is useful for people who only want to enable dynamic debug for
kernel modules without worrying about kernel image size and memory
consumption is increasing too much.
[orson.zhai@unisoc.com: v2]
Link: http://lkml.kernel.org/r/1587408228-10861-1-git-send-email-orson.unisoc@gmail.com
Signed-off-by: Orson Zhai <orson.zhai@unisoc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Link: http://lkml.kernel.org/r/1586521984-5890-1-git-send-email-orson.unisoc@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The ionic driver started using dymamic_hex_dump(), but
that is not always defined:
drivers/net/ethernet/pensando/ionic/ionic_main.c:229:2: error: implicit declaration of function 'dynamic_hex_dump' [-Werror,-Wimplicit-function-declaration]
Add a dummy implementation to use when CONFIG_DYNAMIC_DEBUG
is disabled, printing nothing.
Fixes: 938962d55229 ("ionic: Add adminq action")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
Similarly to dev/netdev/etc printk helpers, add standard printk helpers
for the RDMA subsystem.
Example output:
efa 0000:00:06.0 efa_0: Hello World!
efa_0: Hello World! (no parent device set)
(NULL ib_device): Hello World! (ibdev is NULL)
Cc: Jason Baron <jbaron@akamai.com>
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Suggested-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
For the upcoming 'define the _ddebug descriptor in assembly', we need
all the descriptors in a translation unit to have distinct names
(because asm does not understand C scope). The easiest way to achieve
that is as usual with an extra level of macros, passing the identifier
to use to the innermost macro, generating it via __UNIQUE_ID or
something.
However, instead of repeating that exercise for dynamic_pr_debug,
dynamic_dev_dbg, dynamic_netdev_dbg and dynamic_hex_dump separately, we
can use the similarity between their bodies to implement them via a
common macro, _dynamic_func_call - though the hex_dump case requires a
slight variant, since print_hex_dump does not take the _ddebug
descriptor. We'll also get to use that variant elsewhere (btrfs).
Link: http://lkml.kernel.org/r/20190212214150.4807-11-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Jason Baron <jbaron@akamai.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
For symmetry with ddebug_remove_module, and to avoid a bit of ifdeffery
in module.c, move the declaration of ddebug_add_module inside #if
defined(CONFIG_DYNAMIC_DEBUG) and add a corresponding no-op stub in the
#else branch.
Link: http://lkml.kernel.org/r/20190212214150.4807-10-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Jason Baron <jbaron@akamai.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Instead of defining DEFINE_DYNAMIC_DEBUG_METADATA in terms of a helper
DEFINE_DYNAMIC_DEBUG_METADATA_KEY, that needs another helper dd_key_init
to be properly defined, just make the various #ifdef branches define a
_DPRINTK_KEY_INIT that can be used directly, similar to
_DPRINTK_FLAGS_DEFAULT.
Link: http://lkml.kernel.org/r/20190212214150.4807-5-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Jason Baron <jbaron@akamai.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently, CONFIG_JUMP_LABEL just means "I _want_ to use jump label".
The jump label is controlled by HAVE_JUMP_LABEL, which is defined
like this:
#if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL)
# define HAVE_JUMP_LABEL
#endif
We can improve this by testing 'asm goto' support in Kconfig, then
make JUMP_LABEL depend on CC_HAS_ASM_GOTO.
Ugly #ifdef HAVE_JUMP_LABEL will go away, and CONFIG_JUMP_LABEL will
match to the real kernel capability.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Although dynamic debug is often only used for debug builds, sometimes
its enabled for production builds as well. Minimize its impact by using
jump labels. This reduces the text section by 7000+ bytes in the kernel
image below. It does increase data, but this should only be referenced
when changing the direction of the branches, and hence usually not in
cache.
text data bss dec hex filename
8194852 4879776 925696 14000324 d5a0c4 vmlinux.pre
8187337 4960224 925696 14073257 d6bda9 vmlinux.post
Link: http://lkml.kernel.org/r/d165b465e8c89bc582d973758d40be44c33f018b.1467837322.git.jbaron@akamai.com
Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The return value is not used by callers of these functions
so change the functions to return void.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Introduce print_hex_dump_debug() that can be dynamically controlled, similar to
pr_debug.
Also, make print_hex_dump_bytes() dynamically controlled
Implement only 'p' flag (_DPRINTK_FLAGS_PRINT) to keep it simple since hex dump prints
multiple lines and long prefix would impact readability.
To provide line/file etc. information, use pr_debug or similar
before/after print_hex_dump_debug()
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The __used attribute prevents gcc from eliminating
unnecessary, otherwise optimized away, metadata for
debugging logging messages.
Remove the __used attribute.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
drivers/infiniband/ulp/srp/ib_srp.c #defines pr_fmt() PFX fmt, but PFX
is not #defined until after <linux/*> headers are included.
This results in a bad expansion of the pr_warn() in the stub function.
2084c2084
< printk("<4>" PFX "dyndbg supported only in " "CONFIG_DYNAMIC_DEBUG builds\n")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This introduces a fake module param $module.dyndbg. Its based upon
Thomas Renninger's $module.ddebug boot-time debugging patch from
https://lkml.org/lkml/2010/9/15/397
The 'fake' module parameter is provided for all modules, whether or
not they need it. It is not explicitly added to each module, but is
implemented in callbacks invoked from parse_args.
For builtin modules, dynamic_debug_init() now directly calls
parse_args(..., &ddebug_dyndbg_boot_params_cb), to process the params
undeclared in the modules, just after the ddebug tables are processed.
While its slightly weird to reprocess the boot params, parse_args() is
already called repeatedly by do_initcall_levels(). More importantly,
the dyndbg queries (given in ddebug_query or dyndbg params) cannot be
activated until after the ddebug tables are ready, and reusing
parse_args is cleaner than doing an ad-hoc parse. This reparse would
break options like inc_verbosity, but they probably should be params,
like verbosity=3.
ddebug_dyndbg_boot_params_cb() handles both bare dyndbg (aka:
ddebug_query) and module-prefixed dyndbg params, and ignores all other
parameters. For example, the following will enable pr_debug()s in 4
builtin modules, in the order given:
dyndbg="module params +p; module aio +p" module.dyndbg=+p pci.dyndbg
For loadable modules, parse_args() in load_module() calls
ddebug_dyndbg_module_params_cb(). This handles bare dyndbg params as
passed from modprobe, and errors on other unknown params.
Note that modprobe reads /proc/cmdline, so "modprobe foo" grabs all
foo.params, strips the "foo.", and passes these to the kernel.
ddebug_dyndbg_module_params_cb() is again called for the unknown
params; it handles dyndbg, and errors on others. The "doing" arg
added previously contains the module name.
For non CONFIG_DYNAMIC_DEBUG builds, the stub function accepts
and ignores $module.dyndbg params, other unknowns get -ENOENT.
If no param value is given (as in pci.dyndbg example above), "+p" is
assumed, which enables all pr_debug callsites in the module.
The dyndbg fake parameter is not shown in /sys/module/*/parameters,
thus it does not use any resources. Changes to it are made via the
control file.
Also change pr_info in ddebug_exec_queries to vpr_info,
no need to see it all the time.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
CC: Thomas Renninger <trenn@suse.de>
CC: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
clean up some space-before-tabs problems.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
lineno:24 allows files with 4 million lines, an insane file-size, even
for never-to-get-in-tree machine generated code. Reduce this to 18
bits, which still allows 256k lines. This is still insanely big, but
its not raving mad.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Change describe_flags() to emit '=[pmflt_]+' for current callsite
flags, or just '=_' when they're disabled. Having '=' in output
allows a more selective grep expression; in contrast '-' may appear
in filenames, line-ranges, and format-strings. '=' also has better
mnemonics, saying; "the current setting is equal to <flags>".
This allows grep "=_" <dbgfs>/dynamic_debug/control to see disabled
callsites while avoiding the many occurrences of " = " seen in format
strings.
Enlarge flagsbufs to handle additional flag char, and alter
ddebug_parse_flags() to allow flags=0, so that user can turn off all
debug flags via:
~# echo =_ > <dbgfs>/dynamic_debug/control
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
If CONFIG_DYNAMIC_DEBUG is defined, honor it over DEBUG, so that
pr_debug()s are controllable, instead of always-on. When DEBUG is
also defined, change _DPRINTK_FLAGS_DEFAULT to enable printing by
default.
Also adding _DPRINTK_FLAGS_INCL_MODNAME would be nice, but there are
numerous cases of pr_debug(NAME ": ...), which would result in double
printing of module-name. So defer this until things settle.
Cc: David Miller <davem@davemloft.net>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Currently any enabled dynamic-debug flag on a pr_debug callsite will
enable printing, even if _DPRINTK_FLAGS_PRINT is off. Checking print
flag directly allows "-p" to disable callsites without fussing with
other flags, so the following disables everything, without altering
flags user may have set:
echo -p > $DBGFS/dynamic_debug/control
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Standardize the style for compiler based printf format verification.
Standardized the location of __printf too.
Done via script and a little typing.
$ grep -rPl --include=*.[ch] -w "__attribute__" * | \
grep -vP "^(tools|scripts|include/linux/compiler-gcc.h)" | \
xargs perl -n -i -e 'local $/; while (<>) { s/\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf\s*,\s*(.+)\s*,\s*(.+)\s*\)\s*\)\s*\)/__printf($1, $2)/g ; print; }'
[akpm@linux-foundation.org: revert arch bits]
Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Replace the repetitive struct _ddebug descriptor definitions with a new
DECLARE_DYNAMIC_DEBUG_META_DATA(name, fmt) macro.
[akpm@linux-foundation.org: s/DECLARE/DEFINE/]
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Previously, if dynamic debug was enabled netdev_dbg() was using
dynamic_dev_dbg() to print out the underlying msg. Fix this by making
sure netdev_dbg() uses __netdev_printk().
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Remove no longer used dynamic debug control variables. The
definitions were removed a while ago, but we forgot to clean
up the extern references.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Unlike dynamic_pr_debug, dynamic uses of dev_dbg can not
currently add task_pid/KBUILD_MODNAME/__func__/__LINE__
to selected debug output.
Add a new function similar to dynamic_pr_debug to
optionally emit these prefixes.
Cc: Aloisio Almeida <aloisio.almeida@openbossa.org>
Noticed-by: Aloisio Almeida <aloisio.almeida@openbossa.org>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Introduce:
static __always_inline bool static_branch(struct jump_label_key *key);
instead of the old JUMP_LABEL(key, label) macro.
In this way, jump labels become really easy to use:
Define:
struct jump_label_key jump_key;
Can be used as:
if (static_branch(&jump_key))
do unlikely code
enable/disale via:
jump_label_inc(&jump_key);
jump_label_dec(&jump_key);
that's it!
For the jump labels disabled case, the static_branch() becomes an
atomic_read(), and jump_label_inc()/dec() are simply atomic_inc(),
atomic_dec() operations. We show testing results for this change below.
Thanks to H. Peter Anvin for suggesting the 'static_branch()' construct.
Since we now require a 'struct jump_label_key *key', we can store a pointer into
the jump table addresses. In this way, we can enable/disable jump labels, in
basically constant time. This change allows us to completely remove the previous
hashtable scheme. Thanks to Peter Zijlstra for this re-write.
Testing:
I ran a series of 'tbench 20' runs 5 times (with reboots) for 3
configurations, where tracepoints were disabled.
jump label configured in
avg: 815.6
jump label *not* configured in (using atomic reads)
avg: 800.1
jump label *not* configured in (regular reads)
avg: 803.4
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110316212947.GA8792@redhat.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Suggested-by: H. Peter Anvin <hpa@linux.intel.com>
Tested-by: David Daney <ddaney@caviumnetworks.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Add flags that allow the user to specify via debugfs whether or not the
module name, function name, line number and/or thread ID have to be
included in the printed message.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Greg Banks <gnb@fmeh.org>
Cc: Konrad Rzeszutek Wilk <konrad@darnok.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
On older gcc (3.3) dynamic debug fails to compile:
include/net/inet_connection_sock.h: In function `inet_csk_reset_xmit_timer':
include/net/inet_connection_sock.h:236: error: duplicate label declaration `do_printk'
include/net/inet_connection_sock.h:219: error: this is a previous declaration
include/net/inet_connection_sock.h:236: error: duplicate label declaration `out'
include/net/inet_connection_sock.h:219: error: this is a previous declaration
include/net/inet_connection_sock.h:236: error: duplicate label `do_printk'
include/net/inet_connection_sock.h:236: error: duplicate label `out'
Fix, by reverting the usage of JUMP_LABEL() in dynamic debug for now.
Cc: <stable@kernel.org>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
* 'for-2.6.37/drivers' of git://git.kernel.dk/linux-2.6-block: (95 commits)
cciss: fix PCI IDs for new Smart Array controllers
drbd: add race-breaker to drbd_go_diskless
drbd: use dynamic_dev_dbg to optionally log uuid changes
dynamic_debug.h: Fix dynamic_dev_dbg() macro if CONFIG_DYNAMIC_DEBUG not set
drbd: cleanup: change "<= 0" to "== 0"
drbd: relax the grace period of the md_sync timer again
drbd: add some more explicit drbd_md_sync
drbd: drop wrong debug asserts, fix recently introduced race
drbd: cleanup useless leftover warn/error printk's
drbd: add explicit drbd_md_sync to drbd_resync_finished
drbd: Do not log an ASSERT for P_OV_REQUEST packets while C_CONNECTED
drbd: fix for possible deadlock on IO error during resync
drbd: fix unlikely access after free and list corruption
drbd: fix for spurious fullsync (uuids rotated too fast)
drbd: allow for explicit resync-finished notifications
drbd: preparation commit, using full state in receive_state()
drbd: drbd_send_ack_dp must not rely on header information
drbd: Fix regression in recv_bm_rle_bits (compressed bitmap)
drbd: Fixed a stupid copy and paste error
drbd: Allow larger values for c-fill-target.
...
Fix up trivial conflict in drivers/block/ataflop.c due to BKL removal
|
|
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
|
Convert the 'dynamic debug' infrastructure to use jump labels.
Signed-off-by: Jason Baron <jbaron@redhat.com>
LKML-Reference: <b77627358cea3e27d7be4386f45f66219afb8452.1284733808.git.jbaron@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
We should initialize the module dynamic debug datastructures
only after determining that the module is not loaded yet. This
fixes a bug that introduced in 2.6.35-rc2, where when a trying
to load a module twice, we also load it's dynamic printing data
twice which causes all sorts of nasty issues. Also handle
the dynamic debug cleanup later on failure.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (removed a #ifdef)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Florian Ragwitz <rafl@debian.org>
Cc: Jason Baron <jbaron@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If CONFIG_DYNAMIC_DEBUG is enabled and a source file has:
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
dynamic_debug.h will duplicate KBUILD_MODNAME
in the output string.
Remove the use of KBUILD_MODNAME from the
output format string generated by dynamic_debug.h
If CONFIG_DYNAMIC_DEBUG is not enabled, no compile-time
check is done to printk/dev_printk arguments.
Add it.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Jason Baron <jbaron@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When pr_fmt() was added to the pr_debug() code, we added it not only to the
dynamic_pr_debug() function, but also to the dynamic_dev_dbg() funciton.
However, dev_dbg() doesn't make use of pr_fmt(), so neither should
dynamic_dev_dbg().
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
When CONFIG_DYNAMIC_DEBUG is enabled, allow callers of pr_debug()
to provide their own definition of pr_fmt() even if that definition
uses tricks like
#define pr_fmt(fmt) "%s:" fmt, __func__
Signed-off-by: Greg Banks <gnb@sgi.com>
Cc: Jason Baron <jbaron@redhat.com>
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This patch combines Greg Bank's dprintk() work with the existing dynamic
printk patchset, we are now calling it 'dynamic debug'.
The new feature of this patchset is a richer /debugfs control file interface,
(an example output from my system is at the bottom), which allows fined grained
control over the the debug output. The output can be controlled by function,
file, module, format string, and line number.
for example, enabled all debug messages in module 'nf_conntrack':
echo -n 'module nf_conntrack +p' > /mnt/debugfs/dynamic_debug/control
to disable them:
echo -n 'module nf_conntrack -p' > /mnt/debugfs/dynamic_debug/control
A further explanation can be found in the documentation patch.
Signed-off-by: Greg Banks <gnb@sgi.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
Jim Cromie
Joe Perches
Orson Zhai
Arnd Bergmann
Gal Pressman
Rasmus Villemoes
Masahiro Yamada
Greg Kroah-Hartman
Jason Baron
Vladimir Kondratiev
Jason Baron
Bart Van Assche
Linus Torvalds
Philipp Reisner
Yehuda Sadeh
Florian Ragwitz
Greg Banks