aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/mmc/sdio.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-07-26mmc: core: Add support for SDIO wakeup interruptAxe Yang1-0/+5
If wakeup-source flag is set in host dts node, parse EAI information from SDIO CCCR interrupt externsion segment for in-band wakeup. If async interrupt is supported by SDIO card then enable it and set enable_async_irq flag in sdio_cccr structure to 1. The parse flow is implemented in sdio_read_cccr(). Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Axe Yang <axe.yang@mediatek.com> Link: https://lore.kernel.org/r/20220726062842.18846-3-axe.yang@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: sdio: fix a typo in the comment of SDIO_SD_REV_3_00Jisheng Zhang1-1/+1
I believe "Spev" is typo, should be "Spec". Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20210311174157.561dada9@xhacker.debian Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-06mmc: sdio: fix setting card data bus width as 4-bitYong Ding1-0/+2
SDIO_CCCR_IF[1:0] in SDIO card is used for card data bus width setting as below: 00b: 1-bit bus 01b: Reserved 10b: 4-bit bus 11b: 8-bit bus (only for embedded SDIO) And sdio_enable_wide is for setting data bus width as 4-bit. But currently, it first reads the register, second OR' 1b with SDIO_CCCR_IF[1], and then writes it back. As we can see, this is based on such assumption that the SDIO_CCCR_IF[0] is always 0. Apparently, this is not right. Signed-off-by: Yong Ding <yongd@marvell.com> Acked-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sdio: support SDIO UHS cardsPhilip Rakity1-2/+27
This patch adds support for sdio UHS cards per the version 3.0 spec. UHS mode is only enabled for version 3.0 cards when both the host and the controller support UHS modes. 1.8v signaling support is removed if both the card and the host do not support UHS. This is done to maintain compatibility and some system/card combinations break when 1.8v signaling is enabled when the host does not support UHS. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Aaron Lu <Aaron.lu@amd.com> Reviewed-by: Arindam Nath <arindam.nath@amd.com> Tested-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26mmc: recognise SDIO cards with SDIO_CCCR_REV 3.00Bing Zhao1-0/+2
Table 6-2: CCCR bit Definitions, address 00h. Part E1 SDIO Simplified Specification Version 3.00, Feb. 25, 2011. This patch has been tested with Marvell WLAN device SD8797. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: Standardize header file inclusion checks.Robert P. J. Day1-4/+3
Standardize the checks for multiple MMC header file inclusion, including adding comments to terminating #endif's, and fixing one incorrect comment. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-09-09mmc: avoid getting CID on SDIO-only cardsDavid Vrabel1-0/+2
The introduction of support for SD combo cards breaks the initialization of all CSR SDIO chips. The GO_IDLE (CMD0) in mmc_sd_get_cid() causes CSR chips to be reset (this is non-standard behavior). When initializing an SDIO card check for a combo card by using the memory present bit in the R4 response to IO_SEND_OP_COND (CMD5). This avoids the call to mmc_sd_get_cid() on an SDIO-only card. Signed-off-by: David Vrabel <david.vrabel@csr.com> Acked-by: Michal Mirolaw <mirq-linux@rere.qmqm.pl> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-15Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davemJohn W. Linville1-0/+2
Conflicts: Documentation/feature-removal-schedule.txt drivers/net/wireless/ath/ath5k/phy.c drivers/net/wireless/wl12xx/wl1271_main.c
2010-04-06libertas/sdio: 8686: set ECSI bit for 1-bit transfersDaniel Mack1-0/+2
When operating in 1-bit mode, SDAT1 is used as dedicated interrupt line. However, the 8686 will only drive this line when the ECSI bit is set in the CCCR_IF register. Thanks to Alagu Sankar for pointing me in the right direction. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Alagu Sankar <alagusankar@embwise.com> Cc: Volker Ernst <volker.ernst@txtr.com> Cc: Dan Williams <dcbw@redhat.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: Holger Schurig <hs4233@mail.mn-solutions.de> Cc: Bing Zhao <bzhao@marvell.com> Cc: libertas-dev@lists.infradead.org Cc: linux-wireless@vger.kernel.org Cc: linux-mmc@vger.kernel.org Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-06sdio: put active devices into 1-bit mode during suspendDaniel Drake1-0/+2
And bring them back to 4-bit mode during resume. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Nicolas Pitre <nico@marvell.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-23sdio: add SDIO_FBR_BASE(f) macroDavid Vrabel1-0/+2
Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23sdio: support IO_RW_EXTENDEDPierre Ossman1-0/+12
Support the multi-byte transfer operation, including handlers for common operations like writel()/readl(). Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23mmc: enable/disable functions for SDIOPierre Ossman1-0/+92
Like many other buses, the devices (functions) on the SDIO bus must be enabled before they can be used. Add functions that allow drivers to do so. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23mmc: implement SDIO IO_RW_DIRECT operationPierre Ossman1-0/+34
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23mmc: detect SDIO cardsPierre Ossman1-0/+19
Really basic init sequence for SDIO cards. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.