aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/pm_opp.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-07-12OPP: Remove dev{m}_pm_opp_of_add_table_noclk()Viresh Kumar1-12/+0
Remove the now unused variants and the now unnecessary "getclk" parameter from few routines. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-12OPP: Provide a simple implementation to configure multiple clocksViresh Kumar1-0/+10
This provides a simple implementation to configure multiple clocks for a device. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-12OPP: Allow multiple clocks for a deviceViresh Kumar1-1/+6
This patch adds support to allow multiple clocks for a device. The design is pretty much similar to how this is done for regulators, and platforms can supply their own version of the config_clks() callback if they have multiple clocks for their device. The core manages the calls via opp_table->config_clks() eventually. We have kept both "clk" and "clks" fields in the OPP table structure and the reason is provided as a comment in _opp_set_clknames(). The same isn't done for "rates" though and we use rates[0] at most of the places now. Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Remove dev_pm_opp_find_freq_ceil_by_volt()Viresh Kumar1-8/+0
This was added few years back, but the code that was supposed to use it never got merged. Remove the unused helper. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Remove custom OPP helper supportViresh Kumar1-51/+0
The only user of the custom helper is migrated to use dev_pm_opp_set_config_regulators() interface. Remove the now unused custom OPP helper support. This cleans up _set_opp() and leaves a single code path to be used by all users. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Add dev_pm_opp_get_supplies()Viresh Kumar1-0/+7
We already have an API for getting voltage information for a single regulator, dev_pm_opp_get_voltage(), but there is nothing available for multiple regulator case. This patch adds a new API, dev_pm_opp_get_supplies(), to get all information related to the supplies for an OPP. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Add support for config_regulators() helperViresh Kumar1-0/+22
Extend the dev_pm_opp_set_config() interface to allow adding config_regulators() helpers. This helper will be called to set the voltages of the regulators from the regular path in _set_opp(), while we are trying to change the OPP. This will eventually replace the custom set_opp() helper. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Migrate set-prop-name helper API to use set-config helpersViresh Kumar1-9/+14
Now that we have a central API to handle all OPP table configurations, migrate the set-prop-name family of helpers to use the new infrastructure. The return type and parameter to the APIs change a bit due to this, update the current users as well in the same commit in order to avoid breaking builds. Acked-by: Samuel Holland <samuel@sholland.org> # sun50i Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Migrate attach-genpd API to use set-config helpersViresh Kumar1-17/+31
Now that we have a central API to handle all OPP table configurations, migrate the attach-genpd family of helpers to use the new infrastructure. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Migrate set-opp-helper API to use set-config helpersViresh Kumar1-17/+16
Now that we have a central API to handle all OPP table configurations, migrate the set-opp-helper family of helpers to use the new infrastructure. The return type and parameter to the APIs change a bit due to this, update the current users as well in the same commit in order to avoid breaking builds. Remove devm_pm_opp_register_set_opp_helper() as it has no users currently. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Migrate set-clk-name API to use set-config helpersViresh Kumar1-15/+26
Now that we have a central API to handle all OPP table configurations, migrate the set-clk-name family of helpers to use the new infrastructure. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Migrate set-supported-hw API to use set-config helpersViresh Kumar1-19/+30
Now that we have a central API to handle all OPP table configurations, migrate the set-supported-hw family of helpers to use the new infrastructure. The return type and parameter to the APIs change a bit due to this, update the current users as well in the same commit in order to avoid breaking builds. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Migrate set-regulators API to use set-config helpersViresh Kumar1-16/+28
Now that we have a central API to handle all OPP table configurations, migrate the set-regulators family of helpers to use the new infrastructure. The return type and parameter to the APIs change a bit due to this, update the current users as well in the same commit in order to avoid breaking builds. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Add dev_pm_opp_set_config() and friendsViresh Kumar1-0/+42
The OPP core already have few configuration specific APIs and it is getting complex or messy for both the OPP core and its users. Lets introduce a new set of API which will be used for all kind of different configurations, and shall eventually be used by all the existing ones. The new API, returns a unique token instead of a pointer to the OPP table, which allows the OPP core to drop the resources selectively later on. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Make dev_pm_opp_set_regulators() accept NULL terminated listViresh Kumar1-5/+4
Make dev_pm_opp_set_regulators() accept a NULL terminated list of names instead of making the callers keep the two parameters in sync, which creates an opportunity for bugs to get in. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Steven Price <steven.price@arm.com> # panfrost Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-05-04opp: Reorder definition of ceil/floor helpersViresh Kumar1-11/+11
Reorder the helpers to keep all freq specific ones, followed by level and bw. No functional change. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-05-04opp: Add apis to retrieve opps with interconnect bandwidthKrzysztof Kozlowski1-0/+19
Add dev_pm_opp_find_bw_ceil and dev_pm_opp_find_bw_floor to retrieve opps based on interconnect associated with the opp and bandwidth. The index variable is the index of the interconnect as specified in the opp table in Devicetree. Co-developed-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-03-03OPP: Add "opp-microwatt" supporting codeLukasz Luba1-1/+11
Add new property to the OPP: power value. The OPP entry in the DT can have "opp-microwatt". Add the needed code to handle this new property in the existing infrastructure. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-10-04opp: Add more resource-managed variants of dev_pm_opp_of_add_table()Dmitry Osipenko1-0/+12
Add resource-managed variants of dev_pm_opp_of_add_table_indexed() and dev_pm_opp_of_add_table_noclk(), allowing drivers to remove boilerplate code. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [ Viresh: Added underscore to devm_of_add_table_indexed() ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-10-04opp: Change type of dev_pm_opp_attach_genpd(names) argumentDmitry Osipenko1-4/+4
Elements of the 'names' array are not changed by the code, constify them for consistency. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-16opp: Change return type of devm_pm_opp_attach_genpd()Dmitry Osipenko1-4/+5
Make devm_pm_opp_attach_genpd() to return error code instead of opp_table pointer in order to have return type consistent with the other resource-managed OPP helpers. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-16opp: Change return type of devm_pm_opp_register_set_opp_helper()Dmitry Osipenko1-4/+3
Make devm_pm_opp_register_set_opp_helper() to return error code instead of opp_table pointer in order to have return type consistent with the other resource-managed OPP helpers. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-15opp: Add devres wrapper for dev_pm_opp_of_add_tableYangtao Li1-0/+6
Add devres wrapper for dev_pm_opp_of_add_table() to simplify drivers code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-15opp: Add devres wrapper for dev_pm_opp_set_supported_hwYangtao Li1-0/+8
Add devres wrapper for dev_pm_opp_set_supported_hw() to simplify drivers code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-15opp: Add devres wrapper for dev_pm_opp_set_regulatorsYangtao Li1-0/+8
Add devres wrapper for dev_pm_opp_set_regulators() to simplify drivers code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-15opp: Add devres wrapper for dev_pm_opp_set_clknameYangtao Li1-0/+6
Add devres wrapper for dev_pm_opp_set_clkname() to simplify drivers code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-04OPP: Add function to look up required OPP's for a given OPPSaravana Kannan1-0/+7
Add a function that allows looking up required OPPs given a source OPP table, destination OPP table and the source OPP. Signed-off-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> [ Viresh: Rearranged code, fixed return errors ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02opp: Replace ENOTSUPP with EOPNOTSUPPViresh Kumar1-32/+32
Checkpatch gives following warning for new patches, and the new patches normally follow the existing standards for such stuff. Lets fix it properly. WARNING: ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02opp: Fix "foo * bar" should be "foo *bar"Viresh Kumar1-2/+2
Fix checkpatch warning: ERROR: "foo * bar" should be "foo *bar". Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02opp: Remove dev_pm_opp_set_bw()Viresh Kumar1-6/+0
All the users have migrated to dev_pm_opp_set_opp() now, get rid of the duplicate API, dev_pm_opp_set_bw(), which only performs a part of the new API. While at it, remove the unnecessary parameter to _set_opp_bw(). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02opp: Implement dev_pm_opp_set_opp()Viresh Kumar1-0/+6
The new helper dev_pm_opp_set_opp() can be used for configuring the devices for a particular OPP and can be used by different type of devices, even the ones which don't change frequency (like power domains). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02opp: Add devm_pm_opp_attach_genpdDmitry Osipenko1-0/+7
Add resource-managed version of dev_pm_opp_attach_genpd(). Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [ Viresh: Manually apply the patch and relocate the routines ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02opp: Add devm_pm_opp_register_set_opp_helperDmitry Osipenko1-0/+8
Add resource-managed version of dev_pm_opp_register_set_opp_helper(). Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Tested-by: Matt Merhar <mattmerhar@protonmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [ Viresh: Manually apply the patch and relocate the routines ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02opp: Add dev_pm_opp_of_add_table_noclk()Viresh Kumar1-0/+6
A few drivers have device's clk but they don't want the OPP core to handle that. Add a new helper for them, dev_pm_opp_of_add_table_noclk(). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02opp: Add dev_pm_opp_sync_regulators()Dmitry Osipenko1-0/+6
Extend OPP API with dev_pm_opp_sync_regulators() function, which syncs voltage state of regulators. Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Tested-by: Matt Merhar <mattmerhar@protonmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [ Viresh: Added unlikely() ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02opp: Add dev_pm_opp_get_required_pstate()Dmitry Osipenko1-0/+10
Add dev_pm_opp_get_required_pstate() which allows OPP users to retrieve required performance state of a given OPP. Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Tested-by: Matt Merhar <mattmerhar@protonmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02opp: Add dev_pm_opp_find_level_ceil()Dmitry Osipenko1-0/+8
Add a ceil version of the dev_pm_opp_find_level(). It's handy to have if levels don't start from 0 in OPP table and zero usually means a minimal level. Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Tested-by: Matt Merhar <mattmerhar@protonmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-12-09opp: Don't create an OPP table from dev_pm_opp_get_opp_table()Viresh Kumar1-1/+0
It has been found that some users (like cpufreq-dt and others on LKML) have abused the helper dev_pm_opp_get_opp_table() to create the OPP table instead of just finding it, which is the wrong thing to do. This routine was meant for OPP core's internal working and exposed the whole functionality by mistake. Change the scope of dev_pm_opp_get_opp_table() to only finding the table. The internal helpers _opp_get_opp_table*() are thus renamed to _add_opp_table*(), dev_pm_opp_get_opp_table_indexed() is removed (as we don't need the index field for finding the OPP table) and so the only user, genpd, is updated. Note that the prototype of _add_opp_table() was already left in opp.h by mistake when it was removed earlier and so we weren't required to add it now. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-08-04Merge branch 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pmRafael J. Wysocki1-0/+6
Pull ARM cpufreq driver changes for v5.9-rc1 from Viresh Kumar: "Here are the details: - Adaptive voltage scaling (AVS) support and minor cleanups for brcmstb driver (Florian Fainelli and Markus Mayer). - A new tegra driver and cleanup for the existing one (Sumit Gupta and Jon Hunter). - Bandwidth level support for Qcom driver along with OPP changes (Sibi Sankar). - Cleanups to sti, cpufreq-dt, ap806, CPPC drivers (Viresh Kumar, Lee Jones, Ivan Kokshaysky, Sven Auhagen, and Xin Hao). - Make schedutil default governor for ARM (Valentin Schneider). - Fix dependency issues for imx (Walter Lozano). - Cleanup around cached_resolved_idx in cpufreq core (Viresh Kumar)." * 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: make schedutil the default for arm and arm64 cpufreq: cached_resolved_idx can not be negative cpufreq: Add Tegra194 cpufreq driver dt-bindings: arm: Add NVIDIA Tegra194 CPU Complex binding cpufreq: imx: Select NVMEM_IMX_OCOTP cpufreq: sti-cpufreq: Fix some formatting and misspelling issues cpufreq: tegra186: Simplify probe return path cpufreq: CPPC: Reuse caps variable in few routines cpufreq: ap806: fix cpufreq driver needs ap cpu clk cpufreq: cppc: Reorder code and remove apply_hisi_workaround variable cpufreq: dt: fix oops on armada37xx cpufreq: brcmstb-avs-cpufreq: send S2_ENTER / S2_EXIT commands to AVS cpufreq: brcmstb-avs-cpufreq: Support polling AVS firmware cpufreq: brcmstb-avs-cpufreq: more flexible interface for __issue_avs_command() cpufreq: qcom: Disable fast switch when scaling DDR/L3 cpufreq: qcom: Update the bandwidth levels on frequency change OPP: Add and export helper to set bandwidth cpufreq: blacklist SC7180 in cpufreq-dt-platdev cpufreq: blacklist SDM845 in cpufreq-dt-platdev
2020-07-30OPP: Add and export helper to set bandwidthSibi Sankar1-0/+6
Add and export 'dev_pm_opp_set_bw' to set the bandwidth levels associated with an OPP. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-06-24OPP: refactor dev_pm_opp_of_register_em() and update related driversLukasz Luba1-2/+13
The Energy Model framework supports not only CPU devices. Drop the CPU specific interface with cpumask and add struct device. Add also a return value, user might use it. This new interface provides easy way to create a simple Energy Model, which then might be used by e.g. thermal subsystem. Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-29opp: Add support for parsing interconnect bandwidthGeorgi Djakov1-0/+18
The OPP bindings now support bandwidth values, so add support to parse it from device tree and store it into the new dev_pm_opp_icc_bw struct, which is part of the dev_pm_opp. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> [ Viresh: Create _read_bw() and use it, renamed _of_find_icc_paths() to dev_pm_opp_of_find_icc_paths(), exported it and made opp_table argument optional. Also drop the depends on from Kconfig. ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-11-11PM / OPP: Support adjusting OPP voltages at runtimeStephen Boyd1-0/+13
On some SoCs the Adaptive Voltage Scaling (AVS) technique is employed to optimize the operating voltage of a device. At a given frequency, the hardware monitors dynamic factors and either makes a suggestion for how much to adjust a voltage for the current frequency, or it automatically adjusts the voltage without software intervention. Add an API to the OPP library for the former case, so that AVS type devices can update the voltages for an OPP when the hardware determines the voltage should change. The assumption is that drivers like CPUfreq or devfreq will register for the OPP notifiers and adjust the voltage according to suggestions that AVS makes. This patch is derived from [1] submitted by Stephen. [1] https://lore.kernel.org/patchwork/patch/599279/ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [Roger Lu: Changed to rcu less implementation] Signed-off-by: Roger Lu <roger.lu@mediatek.com> [s.nawrocki@samsung.com: added handling of OPP min/max voltage] Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-07-26opp: Add dev_pm_opp_find_level_exact()Niklas Cassel1-0/+8
Since the performance states in the OPP table are unique, implement a dev_pm_opp_find_level_exact() in order to be able to fetch a specific OPP. Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> [ Viresh: Updated commit log ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-07-26opp: Return genpd virtual devices from dev_pm_opp_attach_genpd()Viresh Kumar1-2/+2
The cpufreq drivers don't need to do runtime PM operations on the virtual devices returned by dev_pm_domain_attach_by_name() and so the virtual devices weren't shared with the callers of dev_pm_opp_attach_genpd() earlier. But the IO device drivers would want to do that. This patch updates the prototype of dev_pm_opp_attach_genpd() to accept another argument to return the pointer to the array of genpd virtual devices. Reported-by: Rajendra Nayak <rnayak@codeaurora.org> Tested-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-06-26Merge branch 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pmRafael J. Wysocki1-4/+4
Pull operating performance points (OPP) framework changes for v5.3 from Viresh Kumar: "This pull request contains: - OPP core changes to support a wider range of devices, like IO devices (Rajendra Nayak and Stehpen Boyd). - Fixes around genpd_virt_devs (Viresh Kumar). - Fix for platform with set_opp() callback (Dmitry Osipenko)." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: opp: Don't use IS_ERR on invalid supplies opp: Make dev_pm_opp_set_rate() handle freq = 0 to drop performance votes opp: Don't overwrite rounded clk rate opp: Allocate genpd_virt_devs from dev_pm_opp_attach_genpd() opp: Attach genpds to devices from within OPP core
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-20opp: Attach genpds to devices from within OPP coreViresh Kumar1-4/+4
The OPP core requires the virtual device pointers to set performance state on behalf of the device, for the multiple power domain case. The genpd API (dev_pm_domain_attach_by_name()) has evolved now to support even the single power domain case and that lets us add common code for handling both the cases more efficiently. The virtual device structure returned by dev_pm_domain_attach_by_name() isn't normally used by the cpufreq drivers as they don't manage power on/off of the domains and so is only useful for the OPP core. This patch moves all the complexity into the OPP core to make the end drivers simple. The earlier APIs dev_pm_opp_{set|put}_genpd_virt_dev() are reworked into dev_pm_opp_{attach|detach}_genpd(). The new helper dev_pm_opp_attach_genpd() accepts a NULL terminated array of strings which contains names of all the genpd's to attach. It then attaches all the domains and saves the pointers to the virtual devices. The other helper undo the work done by this helper. Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-04-10OPP: Introduce dev_pm_opp_find_freq_ceil_by_volt()Andrew-sh.Cheng1-0/+8
This patch introduces a new helper routine in the OPP core, which returns the OPP with the highest frequency which has voltage less than or equal to the target voltage passed to the helper. Signed-off-by: Andrew-sh.Cheng <andrew-sh.cheng@mediatek.com> [ Viresh: Massaged the commit log and renamed the helper with some cleanups. ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-03-06Merge tag 'pm-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds1-0/+6
Pull power management updates from Rafael Wysocki: "These are PM-runtime framework changes to use ktime instead of jiffies for accounting, new PM core flag to mark devices that don't need any form of power management, cpuidle updates including driver API documentation and a new governor, cpufreq updates including a new driver for Armada 8K, thermal cleanups and more, some energy-aware scheduling (EAS) enabling changes, new chips support in the intel_idle and RAPL drivers and assorted cleanups in some other places. Specifics: - Update the PM-runtime framework to use ktime instead of jiffies for accounting (Thara Gopinath, Vincent Guittot) - Optimize the autosuspend code in the PM-runtime framework somewhat (Ladislav Michl) - Add a PM core flag to mark devices that don't need any form of power management (Sudeep Holla) - Introduce driver API documentation for cpuidle and add a new cpuidle governor for tickless systems (Rafael Wysocki) - Add Jacobsville support to the intel_idle driver (Zhang Rui) - Clean up a cpuidle core header file and the cpuidle-dt and ACPI processor-idle drivers (Yangtao Li, Joseph Lo, Yazen Ghannam) - Add new cpufreq driver for Armada 8K (Gregory Clement) - Fix and clean up cpufreq core (Rafael Wysocki, Viresh Kumar, Amit Kucheria) - Add support for light-weight tear-down and bring-up of CPUs to the cpufreq core and use it in the cpufreq-dt driver (Viresh Kumar) - Fix cpu_cooling Kconfig dependencies, add support for CPU cooling auto-registration to the cpufreq core and use it in multiple cpufreq drivers (Amit Kucheria) - Fix some minor issues and do some cleanups in the davinci, e_powersaver, ap806, s5pv210, qcom and kryo cpufreq drivers (Bartosz Golaszewski, Gustavo Silva, Julia Lawall, Paweł Chmiel, Taniya Das, Viresh Kumar) - Add a Hisilicon CPPC quirk to the cppc_cpufreq driver (Xiongfeng Wang) - Clean up the intel_pstate and acpi-cpufreq drivers (Erwan Velu, Rafael Wysocki) - Clean up multiple cpufreq drivers (Yangtao Li) - Update cpufreq-related MAINTAINERS entries (Baruch Siach, Lukas Bulwahn) - Add support for exposing the Energy Model via debugfs and make multiple cpufreq drivers register an Energy Model to support energy-aware scheduling (Quentin Perret, Dietmar Eggemann, Matthias Kaehlcke) - Add Ice Lake mobile and Jacobsville support to the Intel RAPL power-capping driver (Gayatri Kammela, Zhang Rui) - Add a power estimation helper to the operating performance points (OPP) framework and clean up a core function in it (Quentin Perret, Viresh Kumar) - Make minor improvements in the generic power domains (genpd), OPP and system suspend frameworks and in the PM core (Aditya Pakki, Douglas Anderson, Greg Kroah-Hartman, Rafael Wysocki, Yangtao Li)" * tag 'pm-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (80 commits) cpufreq: kryo: Release OPP tables on module removal cpufreq: ap806: add missing of_node_put after of_device_is_available cpufreq: acpi-cpufreq: Report if CPU doesn't support boost technologies cpufreq: Pass updated policy to driver ->setpolicy() callback cpufreq: Fix two debug messages in cpufreq_set_policy() cpufreq: Reorder and simplify cpufreq_update_policy() cpufreq: Add kerneldoc comments for two core functions PM / core: Add support to skip power management in device/driver model cpufreq: intel_pstate: Rework iowait boosting to be less aggressive cpufreq: intel_pstate: Eliminate intel_pstate_get_base_pstate() cpufreq: intel_pstate: Avoid redundant initialization of local vars powercap/intel_rapl: add Ice Lake mobile ACPI / processor: Set P_LVL{2,3} idle state descriptions cpufreq / cppc: Work around for Hisilicon CPPC cpufreq ACPI / CPPC: Add a helper to get desired performance cpufreq: davinci: move configuration to include/linux/platform_data cpufreq: speedstep: convert BUG() to BUG_ON() cpufreq: powernv: fix missing check of return value in init_powernv_pstates() cpufreq: longhaul: remove unneeded semicolon cpufreq: pcc-cpufreq: remove unneeded semicolon ..
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.