aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/regulator (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-09-29regulator: gpio: Add input_supply support in gpio_regulator_configJerome Neanne1-0/+2
This is simillar as fixed-regulator. Used to extract regulator parent from the device tree. Without that property used, the parent regulator can be shut down (if not an always on). Thus leading to inappropriate behavior: On am62-SP-SK this fix is required to avoid tps65219 ldo1 (SDMMC rail) to be shut down after boot completion. Signed-off-by: Jerome Neanne <jneanne@baylibre.com> Link: https://lore.kernel.org/r/20220929132526.29427-2-jneanne@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-09-13MediaTek Helio X10 MT6795 - MT6331/6332 RegulatorsMark Brown2-0/+73
Merge series from AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>: In an effort to give some love to the apparently forgotten MT6795 SoC, I am upstreaming more components that are necessary to support platforms powered by this one apart from a simple boot to serial console. This series adds support for the regulators found in MT6331 and MT6332 main/companion PMICs. Adding support to each driver in each subsystem is done in different patch series as to avoid spamming uninteresting patches to maintainers. Tested on a MT6795 Sony Xperia M5 (codename "Holly") smartphone.
2022-09-13regulator: Add driver for MT6332 PMIC regulatorsAngeloGioacchino Del Regno1-0/+27
Add a driver for the regulators found in the MT6332 PMICs, including six buck and four LDO regulators. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220913123456.384513-5-angelogioacchino.delregno@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-09-13regulator: Add driver for MT6331 PMIC regulatorsAngeloGioacchino Del Regno1-0/+46
Add a driver for the regulators found in the MT6331 PMIC. This PMIC features six buck and 21 Low DropOut (LDO) regulators. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220913123456.384513-3-angelogioacchino.delregno@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-08-18regulator: Add devm helpers for get and enableMatti Vaittinen1-0/+27
A few regulator consumer drivers seem to be just getting a regulator, enabling it and registering a devm-action to disable the regulator at the driver detach and then forget about it. We can simplify this a bit by adding a devm-helper for this pattern. Add devm_regulator_get_enable() and devm_regulator_get_enable_optional() Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/ed7b8841193bb9749d426f3cb3b199c9460794cd.1660292316.git.mazziesaccount@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-28regulator: Consumer load management improvementsMark Brown1-4/+12
Merge series from Douglas Anderson <dianders@chromium.org>: The main goal of this series is to make a small dent in cleaning up the way we deal with regulator loads. The idea is to add some extra functionality to the regulator "bulk" API so that consumers can specify the load using that.
2022-07-27regulator: core: Allow drivers to define their init data as constDouglas Anderson1-0/+4
Drivers tend to want to define the names of their regulators somewhere in their source file as "static const". This means, inevitable, that every driver out there open codes something like this: static const char * const supply_names[] = { "vcc", "vccl", }; static int get_regulators(struct my_data *data) { int i; data->supplies = devm_kzalloc(...) if (!data->supplies) return -ENOMEM; for (i = 0; i < ARRAY_SIZE(supply_names); i++) data->supplies[i].supply = supply_names[i]; return devm_regulator_bulk_get(data->dev, ARRAY_SIZE(supply_names), data->supplies); } Let's make this more convenient by doing providing a helper that does the copy. I have chosen to have the "const" input structure here be the exact same structure as the normal one passed to devm_regulator_bulk_get(). This is slightly inefficent since the input data can't possibly have anything useful for "ret" or consumer and thus we waste 8 bytes per structure. This seems an OK tradeoff for not introducing an extra structure. Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20220726103631.v2.6.I38fc508a73135a5c1b873851f3553ff2a3a625f5@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-27regulator: core: Allow specifying an initial load w/ the bulk APIDouglas Anderson1-4/+8
There are a number of drivers that follow a pattern that looks like this: 1. Use the regulator bulk API to get a bunch of regulators. 2. Set the load on each of the regulators to use whenever the regulators are enabled. Let's make this easier by just allowing the drivers to pass the load in. As part of this change we need to move the error printing in regulator_bulk_get() around; let's switch to the new dev_err_probe() to simplify it. Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20220726103631.v2.4.Ie85f68215ada39f502a96dcb8a1f3ad977e3f68a@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-28regulator: fix a kernel-doc warningMauro Carvalho Chehab1-0/+1
document n_ramp_values field at struct regulator_desc, in order to solve this warning: include/linux/regulator/driver.h:434: warning: Function parameter or member 'n_ramp_values' not described in 'regulator_desc' Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Link: https://lore.kernel.org/r/15efc16e878aa327aa2769023bcdf959a795f41d.1656409369.git.mchehab@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-05-03regulator: pca9450: Make I2C Level Translator configurablePer-Daniel Olsson1-0/+7
Make the I2C Level Translator included in PCA9450 configurable from devicetree. The reset state is off. By setting nxp,i2c-lt-enable, the I2C Level Translator will be enabled while in STANDBY or RUN state. Signed-off-by: Per-Daniel Olsson <perdo@axis.com> Signed-off-by: Rickard x Andersson <rickaran@axis.com> Link: https://lore.kernel.org/r/20220429072211.24957-2-rickaran@axis.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04regulator: mt6366: Add support for MT6366 regulatorJohnson Wang1-0/+45
The MT6366 is a regulator found on boards based on MediaTek MT8186 and probably other SoCs. It is a so called pmic and connects as a slave to SoC using SPI, wrapped inside the pmic-wrapper. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Johnson Wang <johnson.wang@mediatek.com> Link: https://lore.kernel.org/r/20220401080212.27383-2-johnson.wang@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-11Merge tag 'regulator-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds1-13/+54
Pull regulator updates from Mark Brown: "This has been a fairly quiet release for the regulator API, the main thing has been the addition of helpers for interrupt handling from Matti Vaittinen. We do also have support for quite a few new devices. Summary: - Helpers for trivial interrupt notifications, making it easier for drivers to handle error interrupts. - Support for Dialog DA914x, Maxim MAX2008x, Qualcomm PM8826, PMG1100, and PM8450 and TI TPS68470" * tag 'regulator-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (30 commits) regulator: Add MAX20086-MAX20089 driver dt-bindings: regulators: Add bindings for Maxim MAX20086-MAX20089 regulator: qcom_smd: Align probe function with rpmh-regulator regulator: remove redundant ret variable regulator: qcom-labibb: OCP interrupts are not a failure while disabled regulator: dt-bindings: samsung,s5m8767: Move fixed string BUCK9 to 'properties' regulator: Introduce tps68470-regulator driver drivers/regulator: remove redundant ret variable regulator: fix bullet lists of regulator_ops comment regulator: Fix type of regulator-coupled-max-spread property regulator: maxim,max8973: Document interrupts property regulator: qcom-rpmh: Add support for PM8450 regulators regulator: qcom,rpmh: Add compatible for PM8450 regulator: da9121: Add DA914x binding info regulator: da9121: Remove erroneous compatible from binding regulator: da9121: Add DA914x support regulator: da9121: Prevent current limit change when enabled regulator: qcom-rpmh: Add PMG1110 regulators dt-bindings: regulator: Add compatible for pmg1110 regulator: qcom_spmi: Add pm8226 regulators ...
2021-12-07regulator: fix bullet lists of regulator_ops commentYanteng Si1-9/+13
Since 89a6a5e56c82("regulator: add property parsing and callbacks to set protection limits") which introduced a warning: Documentation/driver-api/regulator:166: ./include/linux/regulator/driver.h:96: WARNING: Unexpected indentation. Documentation/driver-api/regulator:166: ./include/linux/regulator/driver.h:98: WARNING: Block quote ends without a blank line; unexpected unindent. Let's fix them. Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Link: https://lore.kernel.org/r/20211207123230.2262047-1-siyanteng@loongson.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-24regulator: irq_helper: Provide helper for trivial IRQ notificationsMatti Vaittinen1-0/+2
Provide a generic map_event helper for regulators which have a notification IRQ with single, well defined purpose. Eg, IRQ always indicates exactly one event for exactly one regulator device. For such IRQs the mapping is trivial. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/603b7ed1938013a00371c1e7ccc63dfb16982b87.1637736436.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-24regulator: Add regulator_err2notif() helperMatti Vaittinen1-0/+34
Help drivers avoid storing both supported notification and supported error flags by supporting conversion from regulator error to notification. This may help saving some bytes. Add helper for finding the regulator notification corresponding to a regulator error. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/eb1755ac0569ff07ffa466cf8912c6fd50e7c7c6.1637736436.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-24regulator: Drop unnecessary struct memberMatti Vaittinen1-1/+0
The irq_flags from the regulator IRQ helper description struct was never used. The IRQ flags are passed as parameters to helper registration instead. Remove the unnecessary struct field. Fixes: 7111c6d1b31b ("regulator: IRQ based event/error notification helpers") Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/5f6371e178453fa2b165da50452f7db4e986debb.1637736436.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-18regulator: Add units to limit documentationMatti Vaittinen1-3/+5
The documentation for limits used at protection level setting did not mention the units. Fix the units in documentation to match values passed in from device-tree (uV, uA, Kelvin) to avoid confusion. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/111114aca991e41e49a32f89b74e95285f07c1e3.1637233864.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-18regulator: Update protection IRQ helper docsMatti Vaittinen1-6/+8
The documentation of IRQ notification helper had still references to first RFC implementation which called BUG() while trying to protect the hardware. Behaviour was improved as calling the BUG() was not a proper solution. Current implementation attempts to call poweroff if handling of potentially damaging error notification fails. Update the documentation to reflect the actual behaviour. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/0c9cc4bcf20c3da66fd5a85c97ee4288e5727538.1637233864.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-21regulator: tps62360: replacing legacy gpio interface for gpiodMaíra Canal1-6/+0
Removing all linux/gpio.h and linux/of_gpio.h dependencies and replacing them with the gpiod interface. Signed-off-by: Maíra Canal <maira.canal@usp.br> Link: https://lore.kernel.org/r/YWxmL2baF5AdzyHv@fedora Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-21regulator: lp872x: Remove lp872x_dvs_stateNathan Chancellor1-6/+1
After this driver was converted to gpiod, clang started warning: vers/regulator/lp872x.c:689:57: error: implicit conversion from enumeration type 'enum lp872x_dvs_state' to different enumeration type 'enum gpiod_flags' [-Werror,-Wenum-conversion] dvs->gpio = devm_gpiod_get_optional(lp->dev, "ti,dvs", pinstate); ~~~~~~~~~~~~~~~~~~~~~~~ ^~~~~~~~ 1 error generated. lp872x_dvs_state was updated to have values from gpiod_flags but this is not enough to avoid an implicit conversion warning from either GCC or clang (although GCC enables this warning under -Wextra instead of -Wall like clang so it is not seen under normal builds). Eliminate lp872x_dvs_state in favor of using gpiod_flags everywhere so that there is no more warning about an implicit conversion. Fixes: 72bf80cf09c4 ("regulator: lp872x: replacing legacy gpio interface for gpiod") Link: https://github.com/ClangBuiltLinux/linux/issues/1481 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20211019004335.193492-1-nathan@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-16regulator: lp872x: replacing legacy gpio interface for gpiodMaíra Canal1-7/+7
Removing all linux/gpio.h and linux/of_gpio.h dependencies and replacing them with the gpiod interface Signed-off-by: Maíra Canal <maira.canal@usp.br> Message-Id: <YWma2yTyuwS5XwhY@fedora> Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-23regulator: Documentation fix for regulator error notification helperMatti Vaittinen1-3/+4
The helper to send IRQ notification for regulator errors had still old description mentioning calling BUG() as a last resort when error status reading has kept failing for more times than a given threshold. The impementation calling BUG() did never end-up in-tree but was replaced by hopefully more sophisticated handler trying to power-off the system. Fix the documentation to reflect actual behaviour. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/20210823075651.GA3717293@localhost.localdomain Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-18regulator: Minor regulator documentation fixes.Matti Vaittinen1-1/+7
The newly added regulator ramp-delay specifiers in regulator desc lacked the documentation. Add some. Also fix a typo. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/20210818041513.GA2408290@dc7vkhyh15000m40t6jht-3.rev.dnainternet.fi Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-12Merge series "regulator: devres: remove unused device-managed unregister APIs" from Alexandru Ardelean <aardelean@deviqon.com>:Mark Brown2-16/+0
These APIs aren't used anywhere and most-likely exist because of the general principle of C APIs, where if an API function does an allocation/registration, it must also have an equivalent deallocation/deregistration counterpart. For devm_ functions this isn't all that true (for all cases), as the idea of these function is to provide an auto-cleanup logic on drivers/system de-init. Removing these discourages any weird logic that could be created with such an API functions. Alexandru Ardelean (4): regulator: devres: remove devm_regulator_unregister_notifier() function regulator: devres: remove devm_regulator_unregister() function regulator: devres: remove devm_regulator_bulk_unregister_supply_alias() regulator: devres: unexport devm_regulator_unregister_supply_alias() drivers/regulator/devres.c | 105 +---------------------------- include/linux/regulator/consumer.h | 23 ------- include/linux/regulator/driver.h | 1 - 3 files changed, 2 insertions(+), 127 deletions(-) -- 2.31.1
2021-07-11regulator: machine.h: fix kernel-doc "bad line"Randy Dunlap1-1/+1
Fix warning caused by a blank/empty line: ../include/linux/regulator/machine.h:115: warning: bad line: Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20210628015422.8845-1-rdunlap@infradead.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-11regulator: devres: unexport devm_regulator_unregister_supply_alias()Alexandru Ardelean1-7/+0
This API hook isn't used anywhere outside of the regulator devres code. This function is needed for the devm_regulator_bulk_register_supply_alias() function on the error path, to cleanup any previously registered supply aliases. This change makes the devm_regulator_unregister_supply_alias() local to the regulator core framework, to avoid it being used in any weird logic. It's also removing the doc-string for devm_regulator_unregister_supply_alias(), since it doesn't need to be documented anymore, as no other external consumer should use it. Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Link: https://lore.kernel.org/r/20210625122324.327585-5-aardelean@deviqon.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-11regulator: devres: remove devm_regulator_bulk_unregister_supply_alias()Alexandru Ardelean1-8/+0
This API hook isn't used anywhere and most-likely exists because of the general principle of C APIs, where if an API function does an allocation/registration, it must also have an equivalent deallocation/deregistration counterpart. For devm_ functions this isn't all that true (for all cases), as the idea of these function is to provide an auto-cleanup logic on drivers/system de-init. Removing this also discourages any weird logic that could be created with such an API function. Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Link: https://lore.kernel.org/r/20210625122324.327585-4-aardelean@deviqon.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-11regulator: devres: remove devm_regulator_unregister() functionAlexandru Ardelean1-1/+0
This API hook isn't used anywhere and most-likely exists because of the general principle of C APIs, where if an API function does an allocation/registration, it must also have an equivalent deallocation/deregistration counterpart. For devm_ functions this isn't all that true (for all cases), as the idea of these function is to provide an auto-cleanup logic on drivers/system de-init. Removing this also discourages any weird logic that could be created with such an API function. Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Link: https://lore.kernel.org/r/20210625122324.327585-3-aardelean@deviqon.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-21Merge series "Extend regulator notification support" from Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>:Mark Brown4-9/+222
Extend regulator notification support This series extends the regulator notification and error flag support. Initial discussion on the topic can be found here: https://lore.kernel.org/lkml/6046836e22b8252983f08d5621c35ececb97820d.camel@fi.rohmeurope.com/ In a nutshell - the series adds: 1. WARNING level events/error flags. (Patch 3) Current regulator 'ERROR' event notifications for over/under voltage, over current and over temperature are used to indicate condition where monitored entity is so badly "off" that it actually indicates a hardware error which can not be recovered. The most typical hanling for that is believed to be a (graceful) system-shutdown. Here we add set of 'WARNING' level flags to allow sending notifications to consumers before things are 'that badly off' so that consumer drivers can implement recovery-actions. 2. Device-tree properties for specifying limit values. (Patches 1, 5) Add limits for above mentioned 'ERROR' and 'WARNING' levels (which send notifications to consumers) and also for a 'PROTECTION' level (which will be used to immediately shut-down the regulator(s) W/O informing consumer drivers. Typically implemented by hardware). Property parsing is implemented in regulator core which then calls callback operations for limit setting from the IC drivers. A warning is emitted if protection is requested by device tree but the underlying IC does not support configuring requested protection. 3. Helpers which can be registered by IC. (Patch 4) Target is to avoid implementing IRQ handling and IRQ storm protection in each IC driver. (Many of the ICs implementin these IRQs do not allow masking or acking the IRQ but keep the IRQ asserted for the whole duration of problem keeping the processor in IRQ handling loop). 4. Emergency poweroff function (refactored out of the thermal_core to kernel/reboot.c) which is called if IC fires error IRQs but IC reading fails and given retry-count is exceeded. (Patches 2, 4) Please note that the mutex in the emergency shutdown was replaced by a simple atomic in order to allow call from any context. The helper was attempted to be done so it could be used to implement roughly same logic as is used in qcom-labibb regulator. This means amongst other things a safety shut-down if IC registers are not readable. Using these shut-down retry counters are optional. The idea is that the helper could be also used by simpler ICs which do not provide status register(s) which can be used to check if error is still active. ICs which do not have such status register can simply omit the 'renable' callback (and retry-counts etc) - and helper assumes the situation is Ok and re-enables IRQ after given time period. If problem persists the handler is ran again and another notification is sent - but at least the delay allows processor to avoid IRQ loop. Patch 7 takes this notification support in use at BD9576MUF. Patch 8 is related to MFD change which is not really related to the RFC here. It was added to this series in order to avoid potential conflicts. Patch 9 adds a maintainers entry. Changelog v10-RESEND: - rebased on v5.13-rc4 Changelog v10: - rebased on v5.13-rc2 - Move rdev_*() print macros to the internal.h and use rdev_dbg() from irq_helpers.c - Export rdev_get_name() and move it from coupler.h to driver.h for others to use. (It was already in coupler.h but not exported - usage was limited and coupler.h does not sound like optimal place as rdev_name is not only used by coupled regulators) - Send all regulator notifications from irq_helpers.c at one OR'd event for the sake of simplicity. For BD9576 this does not matter as it has own IRQ for each event case. Header defining events says they may be OR'd. - Change WARN() at protection shutdown to pr_emerg as suggested by Petr. Changelog v9: - rebases on v5.13-rc1 - Update thermal documentation - Fix regulator notification event number Changelog v8: - split shutdown API adding and thermal core taking it in use to own patches. - replace the spinlock with atomic when ensuring the emergency shutdown is only called once. Changelog v7: general: - rebased on v5.12-rc7 - new patch for refactoring the hw-failure reboot logic out of thermal_core.c for others to use. notification helpers: - fix regulator error_flags query - grammar/typos - do not BUG() but attempt to shut-down the system - use BITS_PER_TYPE() Changelog v6: Add MAINTAINERS entry Changes to IRQ notifiers - move devm functions to drivers/regulator/devres.c - drop irq validity check - use devm_add_action_or_reset() - fix styling issues - fix kerneldocs Changelog v5: - Fix the badly formatted pr_emerg() call. Changelog v4: - rebased on v5.12-rc6 - dropped RFC - fix external FET DT-binding. - improve prints for cases when expecting HW failure. - styling and typos Changelog v3: Regulator core: - Fix dangling pointer access at regulator_irq_helper() stpmic1_regulator: - fix function prototype (compile error) bd9576-regulator: - Update over current limits to what was given in new data-sheet (REV00K) - Allow over-current monitoring without external FET. Set limits to values given in data-sheet (REV00K). Changelog v2: Generic: - rebase on v5.12-rc2 + BD9576 series - Split devm variant of delayed wq to own series Regulator framework: - Provide non devm variant of IRQ notification helpers - shorten dt-property names as suggested by Rob - unconditionally call map_event in IRQ handling and require it to be populated BD9576 regulators: - change the FET resistance property to micro-ohms - fix voltage computation in OC limit setting
2021-06-21regulator: add property parsing and callbacks to set protection limitsMatti Vaittinen2-4/+63
Add DT property parsing code and setting callback for regulator over/under voltage, over-current and temperature error limits. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/e7b8007ba9eae7076178bf3363fb942ccb1cc9a5.1622628334.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-21regulator: IRQ based event/error notification helpersMatti Vaittinen1-0/+135
Provide helper function for IC's implementing regulator notifications when an IRQ fires. The helper also works for IRQs which can not be acked. Helper can be set to disable the IRQ at handler and then re-enabling it on delayed work later. The helper also adds regulator_get_error_flags() errors in cache for the duration of IRQ disabling. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/ebdf86d8c22b924667ec2385330e30fcbfac0119.1622628334.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-21regulator: move rdev_print helpers to internal.hMatti Vaittinen2-5/+10
The rdev print helpers are a nice way to print messages related to a specific regulator device. Move them from core.c to internal.h As the rdev print helpers use rdev_get_name() export it from core.c. Also move the declaration from coupler.h to driver.h because the rdev name is not just a coupled regulator property. I guess the main audience for rdev_get_name() will be the regulator core and drivers. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/dc7fd70dc31de4d0e820b7646bb78eeb04f80735.1622628333.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-21regulator: add warning flagsMatti Vaittinen1-0/+14
Add 'warning' level events and error flags to regulator core. Current regulator core notifications are used to inform consumers about errors where HW is misbehaving in such way it is assumed to be broken/unrecoverable. There are PMICs which are designed for system(s) that may have use for regulator indications sent before HW is damaged so that some board/consumer specific recovery-event can be performed while continuing most of the normal operations. Add new WARNING level events and notifications to be used for that purpose. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/9b54aa5589ae4b5945d53d114bac3fae55fa4818.1622628333.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-14Merge tag 'for-5.14-regulator' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into regulator-5.14Mark Brown1-0/+1
regulator: Changes for v5.14-rc1 This adds regulator_sync_voltage_rdev(), which is used as a dependency for new Tegra power domain code.
2021-06-01regulator: mt6359: Add support for MT6359P regulatorHsin-Hsiung Wang1-0/+1
The MT6359P is a eco version for MT6359 regulator. We add support based on MT6359 regulator driver. Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-01regulator: mt6359: Add support for MT6359 regulatorWen Su1-0/+58
The MT6359 is a regulator found on boards based on MediaTek MT6779 and probably other SoCs. It is a so called pmic and connects as a slave to SoC using SPI, wrapped inside the pmic-wrapper. Signed-off-by: Wen Su <wen.su@mediatek.com> Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-01regulator: core: Add regulator_sync_voltage_rdev()Dmitry Osipenko1-0/+1
Some NVIDIA Tegra devices use a CPU soft-reset method for the reboot and in this case we need to restore the coupled voltages to the state that is suitable for hardware during boot. Add new regulator_sync_voltage_rdev() helper which is needed by regulator drivers in order to sync voltage of a coupled regulators. Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-04-23regulator: core: Fix off_on_delay handlingVincent Whitchurch1-1/+1
The jiffies-based off_on_delay implementation has a couple of problems that cause it to sometimes not actually delay for the required time: (1) If, for example, the off_on_delay time is equivalent to one jiffy, and the ->last_off_jiffy is set just before a new jiffy starts, then _regulator_do_enable() does not wait at all since it checks using time_before(). (2) When jiffies overflows, the value of "remaining" becomes higher than "max_delay" and the code simply proceeds without waiting. Fix these problems by changing it to use ktime_t instead. [Note that since jiffies doesn't start at zero but at INITIAL_JIFFIES ("-5 minutes"), (2) above also led to the code not delaying if the first regulator_enable() is called when the ->last_off_jiffy is not initialised, such as for regulators with ->constraints->boot_on set. It's not clear to me if this was intended or not, but I've preserved this behaviour explicitly with the check for a non-zero ->last_off.] Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20210423114524.26414-1-vincent.whitchurch@axis.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-02regulator: Add regmap helper for ramp-delay settingMatti Vaittinen1-0/+5
Quite a few regulator ICs do support setting ramp-delay by writing a value matching the delay to a ramp-delay register. Provide a simple helper for table-based delay setting. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/f101f1db564cf32cb58719c77af0b00d7236bb89.1617020713.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-02regulator: helpers: Export helper voltage listingMatti Vaittinen1-0/+2
Some drivers need to translate voltage values to selectors prior regulator registration. Currently a regulator_desc based list_voltages helper is only exported for regulators using the linear_ranges. Export similar helper also for regulators using simple linear mapping. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/1200ef7a50c84327ada019b85f6527b4fc9b5ce1.1617020713.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10regulator: pca9450: Clear PRESET_EN bit to fix BUCK1/2/3 voltage settingFrieder Schrempf1-0/+3
The driver uses the DVS registers PCA9450_REG_BUCKxOUT_DVS0 to set the voltage for the buck regulators 1, 2 and 3. This has no effect as the PRESET_EN bit is set by default and therefore the preset values are used instead, which are set to 850 mV. To fix this we clear the PRESET_EN bit at time of initialization. Fixes: 0935ff5f1f0a ("regulator: pca9450: add pca9450 pmic driver") Cc: <stable@vger.kernel.org> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Link: https://lore.kernel.org/r/20210222115229.166620-1-frieder.schrempf@kontron.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-12Merge remote-tracking branch 'regulator/for-5.12' into regulator-nextMark Brown3-166/+51
2021-02-11regulator: pca9450: Enable system reset on WDOG_B assertionFrieder Schrempf1-0/+7
By default the PCA9450 doesn't handle the assertion of the WDOG_B signal, but this is required to guarantee that things like software resets triggered by the watchdog work reliably. As we don't want to rely on the bootloader to enable this, we tell the PMIC to issue a cold reset in case the WDOG_B signal is asserted (WDOG_B_CFG = 10), just as the NXP U-Boot code does. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Link: https://lore.kernel.org/r/20210211105534.38972-3-frieder.schrempf@kontron.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-08regulator: mt6315: Add support for MT6315 regulatorHsin-Hsiung Wang1-0/+44
The MT6315 is a regulator found on boards based on MediaTek MT8192 and probably other SoCs. It connects as a slave to SoC using SPMI. Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Link: https://lore.kernel.org/r/1612678457-11548-3-git-send-email-hsin-hsiung.wang@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-21regulator: consumer: Add missing stubs to regulator/consumer.hDmitry Osipenko1-0/+30
Add missing stubs to regulator/consumer.h in order to fix COMPILE_TEST of the kernel. In particular this should fix compile-testing of OPP core because of a missing stub for regulator_sync_voltage(). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210120205844.12658-1-digetx@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-13regulator: ab8500: Decomission platform data headerLinus Walleij1-156/+0
The platform data header was only used to pass platform data from board files. We now populate the regulators exclusively from device tree, so the header contents can be moved into the regulator drivers. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201205004057.1712753-2-linus.walleij@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-13regulator: ab8500: Remove unused platform dataLinus Walleij1-10/+0
The struct ab8500_regulator_platform_data was a leftover since the days before we probed all regulators from the device tree. The ab8500-ext regulator was the only used, defining platform data and register intialization that was never used for anything, a copy of a boardfile no longer in use. Delete the ab8500_regulator_platform_data and make the ab8500-ext regulator reference the regulator init data in the local file directly. We are 100% device tree these days. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201205004057.1712753-1-linus.walleij@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-11regulator: pfuze100: Convert the driver to DT-onlyFabio Estevam1-6/+0
Since 5.10-rc1 i.MX is a devicetree-only platform, so simplify the code by removing the unused non-DT support. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20201210212748.5849-1-festevam@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-01regulator: da9121: Add support for device variants via devicetreeAdam Ward1-0/+11
Add devicetree configuration and device variant parameters. Use the latter to enable the check and use of parameters specific to dual buck variants. Signed-off-by: Adam Ward <Adam.Ward.opensource@diasemi.com> Link: https://lore.kernel.org/r/5849ce60595aef1018bdde7dcfb54a7397597545.1606755367.git.Adam.Ward.opensource@diasemi.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-01regulator: da9121: Add device variant regmapsAdam Ward1-0/+25
Add ability to probe device and validate configuration, then apply a regmap configuration for a single or dual buck device accordingly. Signed-off-by: Adam Ward <Adam.Ward.opensource@diasemi.com> Link: https://lore.kernel.org/r/068c6b8d5e1b4e221e899e4c914c429429a2ec7d.1606755367.git.Adam.Ward.opensource@diasemi.com Signed-off-by: Mark Brown <broonie@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.