| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In the case of vlan filtering on bridges, the bridge may also have the
corresponding vlan devices as upper devices. Currently the link state
of vlan devices is transferred from the lower device. So this is up if
the bridge is in admin up state and there is at least one bridge port
that is up, regardless of the vlan that the port is a member of.
The link state of the vlan device may need to track only the state of
the subset of ports that are also members of the corresponding vlan,
rather than that of all ports.
Add a flag to specify a vlan bridge binding mode, by which the link
state is no longer automatically transferred from the lower device,
but is instead determined by the bridge ports that are members of the
vlan.
Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This renames the GPIO reset of mdio devices from 'reset' to
'reset_gpio' to better differentiate between GPIO and
reset-controller driven reset line.
Signed-off-by: David Bauer <mail@david-bauer.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit adds support for PHY reset pins handled by a reset controller.
Signed-off-by: David Bauer <mail@david-bauer.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We are discouraging the use of BUG() these days, remove the
unused ASSERT macros from skbuff.h.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To make ICMPv6 closer to ICMPv4, add ratemask parameter. Since the ICMP
message types use larger numeric values, a simple bitmask doesn't fit.
I use large bitmap. The input and output are the in form of list of
ranges. Set the default to rate limit all error messages but Packet Too
Big. For Packet Too Big, use ratemask instead of hard-coded.
There are functions where icmpv6_xrlim_allow() and icmpv6_global_allow()
aren't called. This patch only adds them to icmpv6_echo_reply().
Rate limiting error messages is mandated by RFC 4443 but RFC 4890 says
that it is also acceptable to rate limit informational messages. Thus,
I removed the current hard-coded behavior of icmpv6_mask_allow() that
doesn't rate limit informational messages.
v2: Add dummy function proc_do_large_bitmap() if CONFIG_PROC_SYSCTL
isn't defined, expand the description in ip-sysctl.txt and remove
unnecessary conditional before kfree().
v3: Inline the bitmap instead of dynamically allocated. Still is a
pointer to it is needed because of the way proc_do_large_bitmap work.
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Disabling IPv6 on an interface removes existing entries but nothing prevents
new entries from being manually added. To that end, add a new neigh_table
operation, allow_add, that is called on RTM_NEWNEIGH to see if neighbor
entries are allowed on a given device. If IPv6 is disabled on the device,
allow_add returns false and passes a message back to the user via extack.
$ echo 1 > /proc/sys/net/ipv6/conf/eth1/disable_ipv6
$ ip -6 neigh add fe80::4c88:bff:fe21:2704 dev eth1 lladdr de:ad:be:ef:01:01
Error: IPv6 is disabled on this device.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the fib6_flags and fib6_type to fib6_result. Update the lookup helpers
to set them and update post fib lookup users to use the version from the
result.
This allows nexthop objects to have blackhole nexthop.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change fib6_lookup and fib6_table_lookup to take a fib6_result and set
f6i and nh rather than returning a fib6_info. For now both always
return 0.
A later patch set can make these more like the IPv4 counterparts and
return EINVAL, EACCESS, etc based on fib6_type.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change fib6_table_lookup tracepoint to take the fib6_result and use
the fib6_info and fib6_nh from it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change ip6_mtu_from_fib6 and fib6_mtu to take a fib6_result over a
fib6_info. Update both to use the fib6_nh from fib6_result.
Since the signature of ip6_mtu_from_fib6 is already changing, add const
to daddr and saddr.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add 'struct fib6_result' to hold the fib entry and fib6_nh from a fib
lookup as separate entries, similar to what IPv4 now has with fib_result.
Rename fib6_multipath_select to fib6_select_path, pass fib6_result to
it, and set f6i and nh in the result once a path selection is done.
Call fib6_select_path unconditionally for path selection which means
moving the sibling and oif check to fib6_select_path. To handle the two
different call paths (2 only call multipath_select if flowi6_oif == 0 and
the other always calls it), add a new have_oif_match that controls the
sibling walk if relevant.
Update callers of fib6_multipath_select accordingly and have them use the
fib6_info and fib6_nh from the result.
This is needed for multipath nexthop objects where a single f6i can
point to multiple fib6_nh (similar to IPv4).
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Conflict resolution of af_smc.c from Stephen Rothwell.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Handle init flow failures properly in iwlwifi driver, from Shahar S
Matityahu.
2) mac80211 TXQs need to be unscheduled on powersave start, from Felix
Fietkau.
3) SKB memory accounting fix in A-MDSU aggregation, from Felix Fietkau.
4) Increase RCU lock hold time in mlx5 FPGA code, from Saeed Mahameed.
5) Avoid checksum complete with XDP in mlx5, also from Saeed.
6) Fix netdev feature clobbering in ibmvnic driver, from Thomas Falcon.
7) Partial sent TLS record leak fix from Jakub Kicinski.
8) Reject zero size iova range in vhost, from Jason Wang.
9) Allow pending work to complete before clcsock release from Karsten
Graul.
10) Fix XDP handling max MTU in thunderx, from Matteo Croce.
11) A lot of protocols look at the sa_family field of a sockaddr before
validating it's length is large enough, from Tetsuo Handa.
12) Don't write to free'd pointer in qede ptp error path, from Colin Ian
King.
13) Have to recompile IP options in ipv4_link_failure because it can be
invoked from ARP, from Stephen Suryaputra.
14) Doorbell handling fixes in qed from Denis Bolotin.
15) Revert net-sysfs kobject register leak fix, it causes new problems.
From Wang Hai.
16) Spectre v1 fix in ATM code, from Gustavo A. R. Silva.
17) Fix put of BROPT_VLAN_STATS_PER_PORT in bridging code, from Nikolay
Aleksandrov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (111 commits)
socket: fix compat SO_RCVTIMEO_NEW/SO_SNDTIMEO_NEW
tcp: tcp_grow_window() needs to respect tcp_space()
ocelot: Clean up stats update deferred work
ocelot: Don't sleep in atomic context (irqs_disabled())
net: bridge: fix netlink export of vlan_stats_per_port option
qed: fix spelling mistake "faspath" -> "fastpath"
tipc: set sysctl_tipc_rmem and named_timeout right range
tipc: fix link established but not in session
net: Fix missing meta data in skb with vlan packet
net: atm: Fix potential Spectre v1 vulnerabilities
net/core: work around section mismatch warning for ptp_classifier
net: bridge: fix per-port af_packet sockets
bnx2x: fix spelling mistake "dicline" -> "decline"
route: Avoid crash from dereferencing NULL rt->from
MAINTAINERS: normalize Woojung Huh's email address
bonding: fix event handling for stacked bonds
Revert "net-sysfs: Fix memory leak in netdev_register_kobject"
rtnetlink: fix rtnl_valid_stats_req() nlmsg_len check
qed: Fix the DORQ's attentions handling
qed: Fix missing DORQ attentions
...
|
|
Pull RISC-V fixes from Palmer Dabbelt:
"This contains an assortment of RISC-V-related fixups that we found
after rc4. They're all really unrelated:
- The addition of a 32-bit defconfig, to emphasize testing the 32-bit
port.
- A device tree bindings patch, which is pre-work for some patches
that target 5.2.
- A fix to support booting on systems with more physical memory than
the maximum supported by the kernel"
* tag 'riscv-for-linus-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
RISC-V: Fix Maximum Physical Memory 2GiB option for 64bit systems
dt-bindings: clock: sifive: add FU540-C000 PRCI clock constants
RISC-V: Add separate defconfig for 32bit systems
|
|
Pull KVM fixes from Paolo Bonzini:
"5.1 keeps its reputation as a big bugfix release for KVM x86.
- Fix for a memory leak introduced during the merge window
- Fixes for nested VMX with ept=0
- Fixes for AMD (APIC virtualization, NMI injection)
- Fixes for Hyper-V under KVM and KVM under Hyper-V
- Fixes for 32-bit SMM and tests for SMM virtualization
- More array_index_nospec peppering"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: x86: avoid misreporting level-triggered irqs as edge-triggered in tracing
KVM: fix spectrev1 gadgets
KVM: x86: fix warning Using plain integer as NULL pointer
selftests: kvm: add a selftest for SMM
selftests: kvm: fix for compilers that do not support -no-pie
selftests: kvm/evmcs_test: complete I/O before migrating guest state
KVM: x86: Always use 32-bit SMRAM save state for 32-bit kernels
KVM: x86: Don't clear EFER during SMM transitions for 32-bit vCPU
KVM: x86: clear SMM flags before loading state while leaving SMM
KVM: x86: Open code kvm_set_hflags
KVM: x86: Load SMRAM in a single shot when leaving SMM
KVM: nVMX: Expose RDPMC-exiting only when guest supports PMU
KVM: x86: Raise #GP when guest vCPU do not support PMU
x86/kvm: move kvm_load/put_guest_xcr0 into atomic context
KVM: x86: svm: make sure NMI is injected after nmi_singlestep
svm/avic: Fix invalidate logical APIC id entry
Revert "svm: Fix AVIC incomplete IPI emulation"
kvm: mmu: Fix overflow on kvm mmu page limit calculation
KVM: nVMX: always use early vmcs check when EPT is disabled
KVM: nVMX: allow tests to use bad virtual-APIC page address
...
|
|
These were found with smatch, and then generalized when applicable.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
sk_forward_alloc's updating is also done on rx path, but to be consistent
we change to use sk_mem_charge() in sctp_skb_set_owner_r().
In sctp_eat_data(), it's not enough to check sctp_memory_pressure only,
which doesn't work for mem_cgroup_sockets_enabled, so we change to use
sk_under_memory_pressure().
When it's under memory pressure, sk_mem_reclaim() and sk_rmem_schedule()
should be called on both RENEGE or CHUNK DELIVERY path exit the memory
pressure status as soon as possible.
Note that sk_rmem_schedule() is using datalen to make things easy there.
Reported-by: Matteo Croce <mcroce@redhat.com>
Tested-by: Matteo Croce <mcroce@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Remove the broute pseudo hook, implement this from the bridge
prerouting hook instead. Now broute becomes real table in ebtables,
from Florian Westphal. This also includes a size reduction patch for the
bridge control buffer area via squashing boolean into bitfields and
a selftest.
2) Add OS passive fingerprint version matching, from Fernando Fernandez.
3) Support for gue encapsulation for IPVS, from Jacky Hu.
4) Add support for NAT to the inet family, from Florian Westphal.
This includes support for masquerade, redirect and nat extensions.
5) Skip interface lookup in flowtable, use device in the dst object.
6) Add jiffies64_to_msecs() and use it, from Li RongQing.
7) Remove unused parameter in nf_tables_set_desc_parse(), from Colin Ian King.
8) Statify several functions, patches from YueHaibing and Florian Westphal.
9) Add an optimized version of nf_inet_addr_cmp(), from Li RongQing.
10) Merge route extension to core, also from Florian.
11) Use IS_ENABLED(CONFIG_NF_NAT) instead of NF_NAT_NEEDED, from Florian.
12) Merge ip/ip6 masquerade extensions, from Florian. This includes
netdevice notifier unification.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Merge page ref overflow branch.
Jann Horn reported that he can overflow the page ref count with
sufficient memory (and a filesystem that is intentionally extremely
slow).
Admittedly it's not exactly easy. To have more than four billion
references to a page requires a minimum of 32GB of kernel memory just
for the pointers to the pages, much less any metadata to keep track of
those pointers. Jann needed a total of 140GB of memory and a specially
crafted filesystem that leaves all reads pending (in order to not ever
free the page references and just keep adding more).
Still, we have a fairly straightforward way to limit the two obvious
user-controllable sources of page references: direct-IO like page
references gotten through get_user_pages(), and the splice pipe page
duplication. So let's just do that.
* branch page-refs:
fs: prevent page refcount overflow in pipe_buf_get
mm: prevent get_user_pages() from overflowing page refcount
mm: add 'try_get_page()' helper function
mm: make page ref count overflow check tighter and more explicit
|
|
Change pipe_buf_get() to return a bool indicating whether it succeeded
in raising the refcount of the page (if the thing in the pipe is a page).
This removes another mechanism for overflowing the page refcount. All
callers converted to handle a failure.
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the same as the traditional 'get_page()' function, but instead
of unconditionally incrementing the reference count of the page, it only
does so if the count was "safe". It returns whether the reference count
was incremented (and is marked __must_check, since the caller obviously
has to be aware of it).
Also like 'get_page()', you can't use this function unless you already
had a reference to the page. The intent is that you can use this
exactly like get_page(), but in situations where you want to limit the
maximum reference count.
The code currently does an unconditional WARN_ON_ONCE() if we ever hit
the reference count issues (either zero or negative), as a notification
that the conditional non-increment actually happened.
NOTE! The count access for the "safety" check is inherently racy, but
that doesn't matter since the buffer we use is basically half the range
of the reference count (ie we look at the sign of the count).
Acked-by: Matthew Wilcox <willy@infradead.org>
Cc: Jann Horn <jannh@google.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We have a VM_BUG_ON() to check that the page reference count doesn't
underflow (or get close to overflow) by checking the sign of the count.
That's all fine, but we actually want to allow people to use a "get page
ref unless it's already very high" helper function, and we want that one
to use the sign of the page ref (without triggering this VM_BUG_ON).
Change the VM_BUG_ON to only check for small underflows (or _very_ close
to overflowing), and ignore overflows which have strayed into negative
territory.
Acked-by: Matthew Wilcox <willy@infradead.org>
Cc: Jann Horn <jannh@google.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull block fixes from Jens Axboe:
"Set of fixes that should go into this round. This pull is larger than
I'd like at this time, but there's really no specific reason for that.
Some are fixes for issues that went into this merge window, others are
not. Anyway, this contains:
- Hardware queue limiting for virtio-blk/scsi (Dongli)
- Multi-page bvec fixes for lightnvm pblk
- Multi-bio dio error fix (Jason)
- Remove the cache hint from the io_uring tool side, since we didn't
move forward with that (me)
- Make io_uring SETUP_SQPOLL root restricted (me)
- Fix leak of page in error handling for pc requests (Jérôme)
- Fix BFQ regression introduced in this merge window (Paolo)
- Fix break logic for bio segment iteration (Ming)
- Fix NVMe cancel request error handling (Ming)
- NVMe pull request with two fixes (Christoph):
- fix the initial CSN for nvme-fc (James)
- handle log page offsets properly in the target (Keith)"
* tag 'for-linus-20190412' of git://git.kernel.dk/linux-block:
block: fix the return errno for direct IO
nvmet: fix discover log page when offsets are used
nvme-fc: correct csn initialization and increments on error
block: do not leak memory in bio_copy_user_iov()
lightnvm: pblk: fix crash in pblk_end_partial_read due to multipage bvecs
nvme: cancel request synchronously
blk-mq: introduce blk_mq_complete_request_sync()
scsi: virtio_scsi: limit number of hw queues by nr_cpu_ids
virtio-blk: limit number of hw queues by nr_cpu_ids
block, bfq: fix use after free in bfq_bfqq_expire
io_uring: restrict IORING_SETUP_SQPOLL to root
tools/io_uring: remove IOCQE_FLAG_CACHEHIT
block: don't use for-inside-for in bio_for_each_segment_all
|
|
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Stable fix:
- Fix a deadlock in close() due to incorrect draining of RDMA queues
Bugfixes:
- Revert "SUNRPC: Micro-optimise when the task is known not to be
sleeping" as it is causing stack overflows
- Fix a regression where NFSv4 getacl and fs_locations stopped
working
- Forbid setting AF_INET6 to "struct sockaddr_in"->sin_family.
- Fix xfstests failures due to incorrect copy_file_range() return
values"
* tag 'nfs-for-5.1-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
Revert "SUNRPC: Micro-optimise when the task is known not to be sleeping"
NFSv4.1 fix incorrect return value in copy_file_range
xprtrdma: Fix helper that drains the transport
NFS: Fix handling of reply page vector
NFS: Forbid setting AF_INET6 to "struct sockaddr_in"->sin_family.
|
|
Pull clk fixes from Stephen Boyd:
"Here's more than a handful of clk driver fixes for changes that came
in during the merge window:
- Fix the AT91 sama5d2 programmable clk prescaler formula
- A bunch of Amlogic meson clk driver fixes for the VPU clks
- A DMI quirk for Intel's Bay Trail SoC's driver to properly mark pmc
clks as critical only when really needed
- Stop overwriting CLK_SET_RATE_PARENT flag in mediatek's clk gate
implementation
- Use the right structure to test for a frequency table in i.MX's
PLL_1416x driver"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: imx: Fix PLL_1416X not rounding rates
clk: mediatek: fix clk-gate flag setting
platform/x86: pmc_atom: Drop __initconst on dmi table
clk: x86: Add system specific quirk to mark clocks as critical
clk: meson: vid-pll-div: remove warning and return 0 on invalid config
clk: meson: pll: fix rounding and setting a rate that matches precisely
clk: meson-g12a: fix VPU clock parents
clk: meson: g12a: fix VPU clock muxes mask
clk: meson-gxbb: round the vdec dividers to closest
clk: at91: fix programmable clock for sama5d2
|
|
Pull core fixes from Ingo Molnar:
"Fix an objtool warning plus fix a u64_to_user_ptr() macro expansion
bug"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Add rewind_stack_do_exit() to the noreturn list
linux/kernel.h: Use parentheses around argument in u64_to_user_ptr()
|
|
As reported by Guenter Roeck, the new bit-locking using
BIT(1) doesn't work on the m68k architecture. m68k only requires
2-byte alignment for words and longwords, so there is only one
unused bit in pointers to structs - We current use two, one for the
NULLS marker at the end of the linked list, and one for the bit-lock
in the head of the list.
The two uses don't need to conflict as we never need the head of the
list to be a NULLS marker - the marker is only needed to check if an
object has moved to a different table, and the bucket head cannot
move. The NULLS marker is only needed in a ->next pointer.
As we already have different types for the bucket head pointer (struct
rhash_lock_head) and the ->next pointers (struct rhash_head), it is
fairly easy to treat the lsb differently in each.
So: Initialize buckets heads to NULL, and use the lsb for locking.
When loading the pointer from the bucket head, if it is NULL (ignoring
the lock big), report as being the expected NULLS marker.
When storing a value into a bucket head, if it is a NULLS marker,
store NULL instead.
And convert all places that used bit 1 for locking, to use bit 0.
Fixes: 8f0db018006a ("rhashtable: use bit_spin_locks to protect hash bucket.")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The only times rht_ptr_locked() is used, it is to store a new
value in a bucket-head. This is the only time it makes sense
to use it too. So replace it by a function which does the
whole task: Sets the lock bit and assigns to a bucket head.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rather than dereferencing a pointer to a bucket and then passing the
result to rht_ptr(), we now pass in the pointer and do the dereference
in rht_ptr().
This requires that we pass in the tbl and hash as well to support RCU
checks, and means that the various rht_for_each functions can expect a
pointer that can be dereferenced without further care.
There are two places where we dereference a bucket pointer
where there is no testable protection - in each case we know
that we much have exclusive access without having taken a lock.
The previous code used rht_dereference() to pretend that holding
the mutex provided protects, but holding the mutex never provides
protection for accessing buckets.
So instead introduce rht_ptr_exclusive() that can be used when
there is known to be exclusive access without holding any locks.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch only moves some code around, it doesn't
change the code at all.
A subsequent patch will benefit from this as it needs
to add calls to functions which are now defined before the
call-site, but weren't before.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With these annotations, the rhashtable now gets no
warnings when compiled with "C=1" for sparse checking.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make rxrpc_kernel_check_life() pass back the life counter through the
argument list and return true if the call has not yet completed.
Suggested-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull sound fixes from Takashi Iwai:
"Well, this one became unpleasantly larger than previous pull requests,
but it's a kind of usual pattern: now it contains a collection of ASoC
fixes, and nothing to worry too much.
The fixes for ASoC core (DAPM, DPCM, topology) are all small and just
covering corner cases. The rest changes are driver-specific, many of
which are for x86 platforms and new drivers like STM32, in addition to
the usual fixups for HD-audio"
* tag 'sound-5.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (66 commits)
ASoC: wcd9335: Fix missing regmap requirement
ALSA: hda: Fix racy display power access
ASoC: pcm: fix error handling when try_module_get() fails.
ASoC: stm32: sai: fix master clock management
ASoC: Intel: kbl: fix wrong number of channels
ALSA: hda - Add two more machines to the power_save_blacklist
ASoC: pcm: update module refcount if module_get_upon_open is set
ASoC: core: conditionally increase module refcount on component open
ASoC: stm32: fix sai driver name initialisation
ASoC: topology: Use the correct dobj to free enum control values and texts
ALSA: seq: Fix OOB-reads from strlcpy
ASoC: intel: skylake: add remove() callback for component driver
ASoC: cs35l35: Disable regulators on driver removal
ALSA: xen-front: Do not use stream buffer size before it is set
ASoC: rockchip: pdm: change dma burst to 8
ASoC: rockchip: pdm: fix regmap_ops hang issue
ASoC: simple-card: don't select DPCM via simple-audio-card
ASoC: audio-graph-card: don't select DPCM via audio-graph-card
ASoC: tlv320aic32x4: Change author's name
ALSA: hda/realtek - Add quirk for Tuxedo XC 1509
...
|
|
Pull drm fixes from Dave Airlie:
"Fixes across the driver spectrum this week, the mediatek fbdev support
might be a bit late for this round, but I looked over it and it's not
very large and seems like a useful feature for them.
Otherwise the main thing is a regression fix for i915 5.0 bug that
caused black screens on a bunch of Dell XPS 15s I think, I know at
least Fedora is waiting for this to land, and the udl fix is also for
a regression since 5.0 where unplugging the device would end badly.
core:
- make atomic hooks optional
i915:
- Revert a 5.0 regression where some eDP panels stopped working
- DSI related fixes for platforms up to IceLake
- GVT (regression fix, warning fix, use-after free fix)
amdgpu:
- Cursor fixes
- missing PCI ID fix for KFD
- XGMI fix
- shadow buffer handling after reset fix
udl:
- fix unplugging device crashes.
mediatek:
- stabilise MT2701 HDMI support
- fbdev support
tegra:
- fix for build regression in rc1.
sun4i:
- Allwinner A6 max freq improvements
- null ptr deref fix
dw-hdmi:
- SCDC configuration improvements
omap:
- CEC clock management policy fix"
* tag 'drm-fixes-2019-04-12' of git://anongit.freedesktop.org/drm/drm: (32 commits)
gpu: host1x: Fix compile error when IOMMU API is not available
drm/i915/gvt: Roundup fb->height into tile's height at calucation fb->size
drm/i915/dp: revert back to max link rate and lane count on eDP
drm/i915/icl: Fix port disable sequence for mipi-dsi
drm/i915/icl: Ungate ddi clocks before IO enable
drm/mediatek: no change parent rate in round_rate() for MT2701 hdmi phy
drm/mediatek: using new factor for tvdpll for MT2701 hdmi phy
drm/mediatek: remove flag CLK_SET_RATE_PARENT for MT2701 hdmi phy
drm/mediatek: make implementation of recalc_rate() for MT2701 hdmi phy
drm/mediatek: fix the rate and divder of hdmi phy for MT2701
drm/mediatek: fix possible object reference leak
drm/i915: Get power refs in encoder->get_power_domains()
drm/i915: Fix pipe_bpp readout for BXT/GLK DSI
drm/amd/display: Fix negative cursor pos programming (v2)
drm/sun4i: tcon top: Fix NULL/invalid pointer dereference in sun8i_tcon_top_un/bind
drm/udl: add a release method and delay modeset teardown
drm/i915/gvt: Prevent use-after-free in ppgtt_free_all_spt()
drm/i915/gvt: Annotate iomem usage
drm/sun4i: DW HDMI: Lower max. supported rate for H6
Revert "Documentation/gpu/meson: Remove link to meson_canvas.c"
...
|
|
Now the SKB list implementation assumption can be removed.
And now that we know that the list head is always non-NULL
we can remove the code blocks dealing with that as well.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-04-12
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Improve BPF verifier scalability for large programs through two
optimizations: i) remove verifier states that are not useful in pruning,
ii) stop walking parentage chain once first LIVE_READ is seen. Combined
gives approx 20x speedup. Increase limits for accepting large programs
under root, and add various stress tests, from Alexei.
2) Implement global data support in BPF. This enables static global variables
for .data, .rodata and .bss sections to be properly handled which allows
for more natural program development. This also opens up the possibility
to optimize program workflow by compiling ELFs only once and later only
rewriting section data before reload, from Daniel and with test cases and
libbpf refactoring from Joe.
3) Add config option to generate BTF type info for vmlinux as part of the
kernel build process. DWARF debug info is converted via pahole to BTF.
Latter relies on libbpf and makes use of BTF deduplication algorithm which
results in 100x savings compared to DWARF data. Resulting .BTF section is
typically about 2MB in size, from Andrii.
4) Add BPF verifier support for stack access with variable offset from
helpers and add various test cases along with it, from Andrey.
5) Extend bpf_skb_adjust_room() growth BPF helper to mark inner MAC header
so that L2 encapsulation can be used for tc tunnels, from Alan.
6) Add support for input __sk_buff context in BPF_PROG_TEST_RUN so that
users can define a subset of allowed __sk_buff fields that get fed into
the test program, from Stanislav.
7) Add bpf fs multi-dimensional array tests for BTF test suite and fix up
various UBSAN warnings in bpftool, from Yonghong.
8) Generate a pkg-config file for libbpf, from Luca.
9) Dump program's BTF id in bpftool, from Prashant.
10) libbpf fix to use smaller BPF log buffer size for AF_XDP's XDP
program, from Magnus.
11) kallsyms related fixes for the case when symbols are not present in
BPF selftests and samples, from Daniel
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This makes broute a normal ebtables table, hooking at PREROUTING.
The broute hook is removed.
It uses skb->cb to signal to bridge rx handler that the skb should be
routed instead of being bridged.
This change is backwards compatible with ebtables as no userspace visible
parts are changed.
This means we can also remove the !ops test in ebt_register_table,
it was only there for broute table sake.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Replace NF_HOOK() based invocation of the netfilter hooks with a private
copy of nf_hook_slow().
This copy has one difference: it can return the rx handler value expected
by the stack, i.e. RX_HANDLER_CONSUMED or RX_HANDLER_PASS.
This is needed by the next patch to invoke the ebtables
"broute" table via the standard netfilter hooks rather than the custom
"br_should_route_hook" indirection that is used now.
When the skb is to be "brouted", we must return RX_HANDLER_PASS from the
bridge rx input handler, but there is no way to indicate this via
NF_HOOK(), unless perhaps by some hack such as exposing bridge_cb in the
netfilter core or a percpu flag.
text data bss dec filename
3369 56 0 3425 net/bridge/br_input.o.before
3458 40 0 3498 net/bridge/br_input.o.after
This allows removal of the "br_should_route_hook" in the next patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
rt6_probe sends probes for gateways in a nexthop. As such it really
depends on a fib6_nh, not a fib entry. Move last_probe to fib6_nh and
update rt6_probe to a fib6_nh struct.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Syzkaller report this:
BUG: unable to handle kernel paging request at fffffbfff830524b
PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0
Oops: 0000 [#1] SMP KASAN PTI
CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23
Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2
RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282
RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4
RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258
RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269
R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250
R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830
FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
__list_add include/linux/list.h:60 [inline]
list_add include/linux/list.h:79 [inline]
proto_register+0x444/0x8f0 net/core/sock.c:3375
nr_proto_init+0x73/0x4b3 [netrom]
? 0xffffffffc1628000
? 0xffffffffc1628000
do_one_initcall+0xbc/0x47d init/main.c:887
do_init_module+0x1b5/0x547 kernel/module.c:3456
load_module+0x6405/0x8c10 kernel/module.c:3804
__do_sys_finit_module+0x162/0x190 kernel/module.c:3898
do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003
RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc
R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004
Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan
bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc]
Dumping ftrace buffer:
(ftrace buffer empty)
CR2: fffffbfff830524b
---[ end trace 039ab24b305c4b19 ]---
If nr_proto_init failed, it may forget to call proto_unregister,
tiggering this issue.This patch rearrange code of nr_proto_init
to avoid such issues.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
commit 868d523535c2 ("bpf: add bpf_skb_adjust_room encap flags")
introduced support to bpf_skb_adjust_room for GSO-friendly GRE
and UDP encapsulation.
For GSO to work for skbs, the inner headers (mac and network) need to
be marked. For L3 encapsulation using bpf_skb_adjust_room, the mac
and network headers are identical. Here we provide a way of specifying
the inner mac header length for cases where L2 encap is desired. Such
an approach can support encapsulated ethernet headers, MPLS headers etc.
For example to convert from a packet of form [eth][ip][tcp] to
[eth][ip][udp][inner mac][ip][tcp], something like the following could
be done:
headroom = sizeof(iph) + sizeof(struct udphdr) + inner_maclen;
ret = bpf_skb_adjust_room(skb, headroom, BPF_ADJ_ROOM_MAC,
BPF_F_ADJ_ROOM_ENCAP_L4_UDP |
BPF_F_ADJ_ROOM_ENCAP_L3_IPV4 |
BPF_F_ADJ_ROOM_ENCAP_L2(inner_maclen));
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Commit b0b9395d865e ("bpf: support input __sk_buff context in
BPF_PROG_TEST_RUN") started using bpf_check_uarg_tail_zero in
BPF_PROG_TEST_RUN. However, bpf_check_uarg_tail_zero is not defined
for !CONFIG_BPF_SYSCALL:
net/bpf/test_run.c: In function ‘bpf_ctx_init’:
net/bpf/test_run.c:142:9: error: implicit declaration of function ‘bpf_check_uarg_tail_zero’ [-Werror=implicit-function-declaration]
err = bpf_check_uarg_tail_zero(data_in, max_size, size);
^~~~~~~~~~~~~~~~~~~~~~~~
Let's not build net/bpf/test_run.c when CONFIG_BPF_SYSCALL is not set.
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: b0b9395d865e ("bpf: support input __sk_buff context in BPF_PROG_TEST_RUN")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This reverts commit 009a82f6437490c262584d65a14094a818bcb747.
The ability to optimise here relies on compiler being able to optimise
away tail calls to avoid stack overflows. Unfortunately, we are seeing
reports of problems, so let's just revert.
Reported-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Only reason for having two different register functions was because of
ipt_MASQUERADE and ip6t_MASQUERADE being two different modules.
Previous patch merged those into xt_MASQUERADE, so we can merge this too.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Both are now implemented by nf_nat_masquerade.c, so no need to keep
different headers.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
fcntl(fd, F_SETOWN, getpid()) selects the recipient of SIGURG signals
that are delivered when out-of-band data arrives on socket fd.
If an SMC socket program makes use of such an fcntl() call, it fails
in case of fallback to TCP-mode. In case of fallback the traffic is
processed with the internal TCP socket. Propagating field "file" from the
SMC socket to the internal TCP socket fixes the issue.
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The nvme target hadn't been taking the Get Log Page offset parameter
into consideration, and so has been returning corrupted log pages when
offsets are used. Since many tools, including nvme-cli, split the log
request to 4k, we've been breaking discovery log responses when more
than 3 subsystems exist.
Fix the returned data by internally generating the entire discovery
log page and copying only the requested bytes into the user buffer. The
command log page offset type has been modified to a native __le64 to
make it easier to extract the value from a command.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Tested-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
ASoC: Fixes for v5.1
A few core fixes along with the driver specific ones, mainly fixing
small issues that only affect x86 platforms for various reasons (their
unusual machine enumeration mechanisms mainly, plus a fix for error
handling in topology).
There's some of the driver fixes that look larger than they are, like
the hdmi-codec changes which resulted in an indentation change, and most
of the other large changes are for new drivers like the STM32 changes.
|
|
Add new set of arguments to bpf_attr for BPF_PROG_TEST_RUN:
* ctx_in/ctx_size_in - input context
* ctx_out/ctx_size_out - output context
The intended use case is to pass some meta data to the test runs that
operate on skb (this has being brought up on recent LPC).
For programs that use bpf_prog_test_run_skb, support __sk_buff input and
output. Initially, from input __sk_buff, copy _only_ cb and priority into
skb, all other non-zero fields are prohibited (with EINVAL).
If the user has set ctx_out/ctx_size_out, copy the potentially modified
__sk_buff back to the userspace.
We require all fields of input __sk_buff except the ones we explicitly
support to be set to zero. The expectation is that in the future we might
add support for more fields and we want to fail explicitly if the user
runs the program on the kernel where we don't yet support them.
The API is intentionally vague (i.e. we don't explicitly add __sk_buff
to bpf_attr, but ctx_in) to potentially let other test_run types use
this interface in the future (this can be xdp_md for xdp types for
example).
v4:
* don't copy more than allowed in bpf_ctx_init [Martin]
v3:
* handle case where ctx_in is NULL, but ctx_out is not [Martin]
* convert size==0 checks to ptr==NULL checks and add some extra ptr
checks [Martin]
v2:
* Addressed comments from Martin Lau
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Unlike '&&' operator, the '&' does not have short-circuit
evaluation semantics. IOW both sides of the operator always
get evaluated. Fix the wrong operator in
tls_is_sk_tx_device_offloaded(), which would lead to
out-of-bounds access for for non-full sockets.
Fixes: 4799ac81e52a ("tls: Add rx inline crypto offload")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Mike Manning
David Bauer
Jakub Kicinski
Stephen Suryaputra
David Ahern
David S. Miller
Linus Torvalds
Paolo Bonzini
Xin Long
Matthew Wilcox
NeilBrown
Marc Dionne
Florian Westphal
YueHaibing
Alan Maguire
Stanislav Fomichev
Trond Myklebust
Ursula Braun
Keith Busch
Takashi Iwai