| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently, the probe timer is reused as the raise timer when PLPMTUD is in
the Search Complete state. raise_count was introduced to count how many
times the probe timer has timed out. When raise_count reaches to 30, the
raise timer handler will be triggered.
During the whole processing above, the timer keeps timing out every probe_
interval. It is a waste for the Search Complete state, as the raise timer
only needs to time out after 30 * probe_interval.
Since the raise timer and probe timer are never used at the same time, it
is no need to keep probe timer 'alive' in the Search Complete state. This
patch to introduce sctp_transport_reset_raise_timer() to start the timer
as the raise timer when entering the Search Complete state. When entering
the other states, sctp_transport_reset_probe_timer() will still be called
to reset the timer to the probe timer.
raise_count can be removed from sctp_transport as no need to count probe
timer timeout for raise timer timeout. last_rtx_chunks can be removed as
sctp_transport_reset_probe_timer() can be called in the place where asoc
rtx_data_chunks is changed.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/edb0e48988ea85997488478b705b11ddc1ba724a.1637781974.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The VSC9959 switch embedded within NXP LS1028A (and that version of
Ocelot switches only) supports cut-through forwarding - meaning it can
start the process of looking up the destination ports for a packet, and
forward towards those ports, before the entire packet has been received
(as opposed to the store-and-forward mode).
The up side is having lower forwarding latency for large packets. The
down side is that frames with FCS errors are forwarded instead of being
dropped. However, erroneous frames do not result in incorrect updates of
the FDB or incorrect policer updates, since these processes are deferred
inside the switch to the end of frame. Since the switch starts the
cut-through forwarding process after all packet headers (including IP,
if any) have been processed, packets with large headers and small
payload do not see the benefit of lower forwarding latency.
There are two cases that need special attention.
The first is when a packet is multicast (or flooded) to multiple
destinations, one of which doesn't have cut-through forwarding enabled.
The switch deals with this automatically by disabling cut-through
forwarding for the frame towards all destination ports.
The second is when a packet is forwarded from a port of lower link speed
towards a port of higher link speed. This is not handled by the hardware
and needs software intervention.
Since we practically need to update the cut-through forwarding domain
from paths that aren't serialized by the rtnl_mutex (phylink
mac_link_down/mac_link_up ops), this means we need to serialize physical
link events with user space updates of bonding/bridging domains.
Enabling cut-through forwarding is done per {egress port, traffic class}.
I don't see any reason why this would be a configurable option as long
as it works without issues, and there doesn't appear to be any user
space configuration tool to toggle this on/off, so this patch enables
cut-through forwarding on all eligible ports and traffic classes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20211125125808.2383984-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When doing remote name request, we cannot scan. In the normal case it's
OK since we can expect it to finish within a short amount of time.
However, there is a possibility to scan lots of devices that
(1) requires Remote Name Resolve
(2) is unresponsive to Remote Name Resolve
When this happens, we are stuck to do Remote Name Resolve until all is
done before continue scanning.
This patch adds a time limit to stop us spending too long on remote
name request.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Introducing NAME_REQUEST_FAILED flag that will be sent together with
device found event on name resolve failure. This will provide the
userspace with an information so it can decide not to resolve the
name for these devices in the future.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
num_keys is actually 2 octects not 1:
BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E
page 1989:
Num_Keys_Deleted:
Size: 2 octets
0xXXXX Number of Link Keys Deleted
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Both max_num_keys and num_key are 2 octects:
BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E
page 1985:
Max_Num_Keys:
Size: 2 octets
Range: 0x0000 to 0xFFFF
Num_Keys_Read:
Size: 2 octets
Range: 0x0000 to 0xFFFF
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Pull folio fixes from Matthew Wilcox:
"In the course of preparing the folio changes for iomap for next merge
window, we discovered some problems that would be nice to address now:
- Renaming multi-page folios to large folios.
mapping_multi_page_folio_support() is just a little too long, so we
settled on mapping_large_folio_support(). That meant renaming, eg
folio_test_multi() to folio_test_large().
Rename AS_THP_SUPPORT to match
- I hadn't included folio wrappers for zero_user_segments(), etc.
Also, multi-page^W^W large folio support is now independent of
CONFIG_TRANSPARENT_HUGEPAGE, so machines with HIGHMEM always need
to fall back to the out-of-line zero_user_segments().
Remove FS_THP_SUPPORT to match
- The build bots finally got round to telling me that I missed a
couple of architectures when adding flush_dcache_folio(). Christoph
suggested that we just add linux/cacheflush.h and not rely on
asm-generic/cacheflush.h"
* tag 'folio-5.16b' of git://git.infradead.org/users/willy/pagecache:
mm: Add functions to zero portions of a folio
fs: Rename AS_THP_SUPPORT and mapping_thp_support
fs: Remove FS_THP_SUPPORT
mm: Remove folio_test_single
mm: Rename folio_test_multi to folio_test_large
Add linux/cacheflush.h
|
|
After the previous patches, noone needs 'file' parameter in neither
ioctl hook from tty_ldisc_ops. So remove 'file' from both of them.
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> [NFC]
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20211122094529.24171-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit a9c3f68f3cd8d (tty: Fix low_latency BUG) in 2014,
tty_flip_buffer_push() is only a wrapper to tty_schedule_flip(). All
users were converted in the previous patches, so remove
tty_schedule_flip() completely while inlining its body into
tty_flip_buffer_push().
One less exported function.
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20211122111648.30379-4-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is no point having MOXA PCI device IDs in include/linux/pci_ids.h.
Move them to the driver and sort them all by the ID.
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20211118073125.12283-19-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 89d4f98ae90d ("ARM: remove zte zx platform") missed to remove some
definitions for this platform's debug and serial, e.g., code dependent on
the config DEBUG_ZTE_ZX.
Fortunately, ./scripts/checkkconfigsymbols.py detects this and warns:
DEBUG_ZTE_ZX
Referencing files: arch/arm/include/debug/pl01x.S
Further review by Arnd Bergmann identified even more dead code in the
amba serial driver.
Remove all this left-over from the zte zx platform.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20211102063810.932-1-lukas.bulwahn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ASoC: Fixes for v5.16
There's a large but repetitive set of fixes here for issues with the
Tegra kcontrols not correctly reporting changes to userspace, a fix for
some issues with matching on older x86 platforms introduced during the
merge window together with a set of smaller fixes and one new system
quirk.
|
|
When a new inode is created, send its security context to server along with
creation request (FUSE_CREAT, FUSE_MKNOD, FUSE_MKDIR and FUSE_SYMLINK).
This gives server an opportunity to create new file and set security
context (possibly atomically). In all the configurations it might not be
possible to set context atomically.
Like nfs and ceph, use security_dentry_init_security() to dermine security
context of inode and send it with create, mkdir, mknod, and symlink
requests.
Following is the information sent to server.
fuse_sectx_header, fuse_secctx, xattr_name, security_context
- struct fuse_secctx_header
This contains total number of security contexts being sent and total
size of all the security contexts (including size of
fuse_secctx_header).
- struct fuse_secctx
This contains size of security context which follows this structure.
There is one fuse_secctx instance per security context.
- xattr name string
This string represents name of xattr which should be used while setting
security context.
- security context
This is the actual security context whose size is specified in
fuse_secctx struct.
Also add the FUSE_SECURITY_CTX flag for the `flags` field of the
fuse_init_out struct. When this flag is set the kernel will append the
security context for a newly created inode to the request (create, mkdir,
mknod, and symlink). The server is responsible for ensuring that the inode
appears atomically (preferrably) with the requested security context.
For example, If the server is using SELinux and backed by a "real" linux
file system that supports extended attributes it can write the security
context value to /proc/thread-self/attr/fscreate before making the syscall
to create the inode.
This patch is based on patch from Chirantan Ekbote <chirantan@chromium.org>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
FUSE_INIT flags are close to running out, so add another 32bits worth of
space.
Add FUSE_INIT_EXT flag to the old flags field in fuse_init_in. If this
flag is set, then fuse_init_in is extended by 48bytes, in which a flags_hi
field is allocated to contain the high 32bits of the flags.
A flags_hi field is also added to fuse_init_out, allocated out of the
remaining unused fields.
Known userspace implementations of the fuse protocol have been checked to
accept the extended FUSE_INIT request, but this might cause problems with
other implementations. If that happens to be the case, the protocol
negotiation will have to be extended with an extra initialization request
roundtrip.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The patch adds the binding include file for the HDA header support.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20211125055812.8911-1-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2021-11-24
A fix from Alexander which has been brought up various times found by
automated checkers. Make sure values are in u32 range.
* tag 'ieee802154-for-net-2021-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan:
net: ieee802154: handle iftypes as u32
====================
Link: https://lore.kernel.org/r/20211124150934.3670248-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 939779f5152d161b34f612af29e7dc1ac4472fcf.
Attempts to validate length in the core did not work out: there turn out
to exist multiple broken devices, and in particular legacy devices are
known to be broken in this respect.
We have ideas for handling this better in the next version but for now
let's revert to a known good state to make sure drivers work for people.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The boot-time detection of futex_atomic_cmpxchg_inatomic() has a bug on
some 32-bit arm builds, and Thomas Gleixner suggested that setting
CONFIG_HAVE_FUTEX_CMPXCHG would avoid the problem, as it is always present
anyway.
Looking into which other architectures could do the same showed that almost
all architectures have it, the exceptions being:
- some old 32-bit MIPS uniprocessor cores without ll/sc
- one xtensa variant with no SMP
- 32-bit SPARC when built for SMP
Fix MIPS And Xtensa by rearranging the generic code to let it be used
as a fallback.
For SPARC, the SMP definition just ends up turning off futex anyway, so
this can be done at Kconfig time instead. Note that sparc32 glibc requires
the CASA instruction for its mutexes anyway, which is only available when
running on SPARCv9 or LEON CPUs, but needs to be implemented in the sparc32
kernel for those.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rich Felker <dalias@libc.org>
Link: https://lore.kernel.org/r/20211026100432.1730393-1-arnd@kernel.org
|
|
Emitting a CQE is expensive from the kernel perspective. Often, it's
also not convenient for the userspace, spends some cycles on processing
and just complicates the logic. A similar problems goes for linked
requests, where we post an CQE for each request in the link.
Introduce a new flags, IOSQE_CQE_SKIP_SUCCESS, trying to help with it.
When set and a request completed successfully, it won't generate a CQE.
When fails, it produces an CQE, but all following linked requests will
be CQE-less, regardless whether they have IOSQE_CQE_SKIP_SUCCESS or not.
The notion of "fail" is the same as for link failing-cancellation, where
it's opcode dependent, and _usually_ result >= 0 is a success, but not
always.
Linked timeouts are a bit special. When the requests it's linked to was
not attempted to be executed, e.g. failing linked requests, it follows
the description above. Otherwise, whether a linked timeout will post a
completion or not solely depends on IOSQE_CQE_SKIP_SUCCESS of that
linked timeout request. Linked timeout never "fail" during execution, so
for them it's unconditional. It's expected for users to not really care
about the result of it but rely solely on the result of the master
request. Another reason for such a treatment is that it's racy, and the
timeout callback may be running awhile the master request posts its
completion.
use case 1:
If one doesn't care about results of some requests, e.g. normal
timeouts, just set IOSQE_CQE_SKIP_SUCCESS. Error result will still be
posted and need to be handled.
use case 2:
Set IOSQE_CQE_SKIP_SUCCESS for all requests of a link but the last,
and it'll post a completion only for the last one if everything goes
right, otherwise there will be one only one CQE for the first failed
request.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0220fbe06f7cf99e6fc71b4297bb1cb6c0e89c2c.1636559119.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull HID fixes from Jiri Kosina:
- fix for Intel-ISH driver to make sure it gets aoutoloaded only on
matching devices and not universally (Thomas Weißschuh)
- fix for Wacom driver reporting invalid contact under certain
circumstances (Jason Gerecke)
- probing fix for ft260 dirver (Michael Zaidman)
- fix for generic keycode remapping (Thomas Weißschuh)
- fix for division by zero in hid-magicmouse (Claudia Pellegrino)
- other tiny assorted fixes and new device IDs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: multitouch: Fix Iiyama ProLite T1931SAW (0eef:0001 again!)
HID: nintendo: eliminate dead datastructures in !CONFIG_NINTENDO_FF case
HID: magicmouse: prevent division by 0 on scroll
HID: thrustmaster: fix sparse warnings
HID: Ignore battery for Elan touchscreen on HP Envy X360 15-eu0xxx
HID: input: set usage type to key on keycode remap
HID: input: Fix parsing of HID_CP_CONSUMER_CONTROL fields
HID: ft260: fix i2c probing for hwmon devices
Revert "HID: hid-asus.c: Maps key 0x35 (display off) to KEY_SCREENLOCK"
HID: intel-ish-hid: fix module device-id handling
mod_devicetable: fix kdocs for ishtp_device_id
HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts
HID: nintendo: unlock on error in joycon_leds_create()
platform/x86: isthp_eclite: only load for matching devices
platform/chrome: chros_ec_ishtp: only load for matching devices
HID: intel-ish-hid: hid-client: only load for matching devices
HID: intel-ish-hid: fw-loader: only load for matching devices
HID: intel-ish-hid: use constants for modaliases
HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()
|
|
When kernel.h is used in the headers it adds a lot into dependency hell,
especially when there are circular dependencies are involved.
Replace kernel.h inclusion with the list of what is really being used.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There are no more users for it.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Function rohm_regulator_set_voltage_sel_restricted() and
rohm_regulator_set_dvs_levels() had inlined dummy implementations for
cases when the real implementation was not configured in.
All of the drivers who issue the call to these functions do SELECT the
real implementation from the Kconfig. There should be no cases where the
real implementation was not selected by the drivers using these
functions - such a situation is likely to be an error which deserves to be
noticed at compile-time.
These dummies could in theory be used for compile-testing the drivers
only (without the generic rohm regulator pieces). However, for such
compile testing we should manually drop the selection from KConfig - and
I guess that if it does not work out-of-the-box, then it is not going to
happen. Especially when there should be no reason to omit
compile-testing the generic rohm_regulator part.
Crash test dummies.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/YZ3UXXrk/Efe7Scj@fedora
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Provide a generic map_event helper for regulators which have a notification
IRQ with single, well defined purpose. Eg, IRQ always indicates exactly one
event for exactly one regulator device. For such IRQs the mapping is
trivial.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/603b7ed1938013a00371c1e7ccc63dfb16982b87.1637736436.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Help drivers avoid storing both supported notification and supported error
flags by supporting conversion from regulator error to notification.
This may help saving some bytes.
Add helper for finding the regulator notification corresponding to a
regulator error.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/eb1755ac0569ff07ffa466cf8912c6fd50e7c7c6.1637736436.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The irq_flags from the regulator IRQ helper description struct was never
used. The IRQ flags are passed as parameters to helper registration
instead.
Remove the unnecessary struct field.
Fixes: 7111c6d1b31b ("regulator: IRQ based event/error notification helpers")
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/5f6371e178453fa2b165da50452f7db4e986debb.1637736436.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When the hardware can only deal with a monotonically increasing
appl_ptr, this flag can be set.
In case the application requests a rewind, be it with a
snd_pcm_rewind() or with a direct change of a mmap'ed pointer followed
by a SNDRV_PCM_IOCTL_SYNC_PTR, this patch checks if a rewind
occurred and returns an error.
Credits to Takashi Iwai for identifying the path with SYNC_PTR and
suggesting the pointer checks.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211119230852.206310-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The kernfs implementation has big lock granularity(kernfs_rwsem) so
every kernfs-based(e.g., sysfs, cgroup) fs are able to compete the
lock. It makes trouble for some cases to wait the global lock
for a long time even though they are totally independent contexts
each other.
A general example is process A goes under direct reclaim with holding
the lock when it accessed the file in sysfs and process B is waiting
the lock with exclusive mode and then process C is waiting the lock
until process B could finish the job after it gets the lock from
process A.
This patch switches the global kernfs_rwsem to per-fs lock, which
put the rwsem into kernfs_root.
Suggested-by: Tejun Heo <tj@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Link: https://lore.kernel.org/r/20211118230008.2679780-1-minchan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Tile4 patch still needs an ack from userspace,
IGT tests and some essential fixes, related to
new .plane_caps attribute being added.
This reverts commit 3c542cfa8266e3364938d055b3d548b7bed7f08e.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124092355.16668-1-stanislav.lisovskiy@intel.com
|
|
The commit 1295e2cf3065 ("inet: minor optimization for backlog setting in
listen(2)") added change so that sk_max_ack_backlog is initialised earlier
in inet_dccp_listen() and inet_listen(). Since then, we no longer use
backlog in inet_csk_listen_start(), so let's remove it.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Richard Sailer <richard_siegfried@systemli.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The clock domain crossing error (CDC) is calculated at every fetch of Tx or Rx
timestamps. It includes a division. Especially on arm32 based systems it is
expensive. It also requires two conditionals in the hotpath.
Add a compensation value cache to struct plat_stmmacenet_data and subtract it
unconditionally in the RX/TX functions which spares the conditionals.
The value is initialized to 0 and if supported calculated in the PTP
initialization code.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20211122111931.135135-1-kurt@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When booting the xenbus driver will wait for PV devices to have
connected to their backends before continuing. The timeout is different
between essential and non-essential devices.
Non-essential devices are identified by their nodenames directly in the
xenbus driver, which requires to update this list in case a new device
type being non-essential is added (this was missed for several types
in the past).
In order to avoid this problem, add a "not_essential" flag to struct
xenbus_driver which can be set to "true" by the respective frontend.
Set this flag for the frontends currently regarded to be not essential
(vkbs and vfb) and use it for testing in the xenbus driver.
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20211022064800.14978-2-jgross@suse.com
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
acpi_node_get_parent() isn't used outside drivers/acpi/property.c.
Make it local.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
.ndo_change_proto_down was added seemingly to enable out-of-tree
implementations. Over 2.5yrs later we still have no real users
upstream. Hardwire the generic implementation for now, we can
revert once real users materialize. (rocker is a test vehicle,
not a user.)
We need to drop the optimization on the sysfs side, because
unlike ndos priv_flags will be changed at runtime, so we'd
need READ_ONCE/WRITE_ONCE everywhere..
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2021-11-22
Shiraz Saleem says:
Currently E800 devices come up as RoCEv2 devices by default.
This series add supports for users to configure iWARP or RoCEv2 functionality
per PCI function. devlink parameters is used to realize this and is keyed
off similar work in [1].
[1] https://lore.kernel.org/linux-rdma/20210810132424.9129-1-parav@nvidia.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function rohm_regulator_set_voltage_sel_restricted() has a stub
implementation. Linux-next testing spot following:
include/linux/mfd/rohm-generic.h:93:12: error:
'rohm_regulator_set_voltage_sel_restricted' defined but not used
Fix this by inlining the stub.
Fixes: 8b6e88555971 ("regulator: rohm-regulator: add helper for restricted voltage setting")
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/YZzEP3S7U15bTDAI@fedora
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add neigh_confirm() for the confirmed member in struct neighbour,
it can be called as an independent unit by other functions.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change adds a MCTP Serial transport binding, as defined by DMTF
specificiation DSP0253 - "MCTP Serial Transport Binding". This is
implemented as a new serial line discipline, and can be attached to
arbitrary tty devices.
From the Kconfig description:
This driver provides an MCTP-over-serial interface, through a
serial line-discipline, as defined by DMTF specification "DSP0253 -
MCTP Serial Transport Binding". By attaching the ldisc to a serial
device, we get a new net device to transport MCTP packets.
This allows communication with external MCTP endpoints which use
serial as their transport. It can also be used as an easy way to
provide MCTP connectivity between virtual machines, by forwarding
data between simple virtual serial devices.
Say y here if you need to connect to MCTP endpoints over serial. To
compile as a module, use m; the module will be called mctp-serial.
Once the N_MCTP line discipline is set [using ioctl(TCIOSETD)], we get a
new netdev suitable for MCTP communication.
The 'mctp' utility[1] provides a simple wrapper for this ioctl, using
'link serial <device>':
# mctp link serial /dev/ttyS0 &
# mctp link
dev lo index 1 address 0x00:00:00:00:00:00 net 1 mtu 65536 up
dev mctpserial0 index 5 address 0x(no-addr) net 1 mtu 68 down
[1]: https://github.com/CodeConstruct/mctp
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MBUS node needs to reference the CLK_DRAM clock, as the MBUS
hardware implements memory dynamic frequency scaling using this clock.
Export this clock for SoCs which will be getting a devfreq driver.
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211118031841.42315-2-samuel@sholland.org
|
|
There is no need of this function (and related) since code has been
converted to use the new arch_update_thermal_pressure() API. The old
code can be removed.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The thermal pressure is a mechanism which is used for providing
information about reduced CPU performance to the scheduler. Usually code
has to convert the value from frequency units into capacity units,
which are understandable by the scheduler. Create a common conversion code
which can be just used via a handy API.
Internally, the topology_update_thermal_pressure() operates on frequency
in MHz and max CPU frequency is taken from 'freq_factor' (per-cpu).
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The D1 has a CCU and a R_CCU (PRCM CCU) like most other sunxi SoCs, with
3 and 4 clock inputs, respectively. Add the compatibles and bindings.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211119043545.4010-2-samuel@sholland.org
|
|
Like the individual CCU drivers, it can be beneficial for memory
consumption of cross-platform configurations to only load the CCU core
on the relevant platform. For example, a generic arm64 kernel sees the
following improvement when building the CCU core and drivers as modules:
before:
text data bss dec hex filename
13882360 5251670 360800 19494830 12977ae vmlinux
after:
text data bss dec hex filename
13734787 5086442 360800 19182029 124b1cd vmlinux
So the result is a 390KB total reduction in kernel image size.
The one early clock provider (sun5i) requires the core to be built in.
Now that loading the MMC driver will trigger loading the CCU core, the
MMC timing mode functions do not need a compile-time fallback.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211119033338.25486-5-samuel@sholland.org
|
|
TileF(Tile4 in bspec) format is 4K tile organized into
64B subtiles with same basic shape as for legacy TileY
which will be supported by Display13.
v2: - Fixed wrong case condition(Jani Nikula)
- Increased I915_FORMAT_MOD_F_TILED up to 12(Imre Deak)
v3: - s/I915_TILING_F/TILING_4/g
- s/I915_FORMAT_MOD_F_TILED/I915_FORMAT_MOD_4_TILED/g
- Removed unneeded fencing code
v4: - Rebased, fixed merge conflict with new table-oriented
format modifier checking(Stan)
- Replaced the rest of "Tile F" mentions to "Tile 4"(Stan)
v5: - Still had to remove some Tile F mentionings
- Moved has_4tile from adlp to DG2(Ramalingam C)
- Check specifically for DG2, but not the Display13(Imre)
v6: - Moved Tile4 associating struct for modifier/display to
the beginning(Imre Deak)
- Removed unneeded case I915_FORMAT_MOD_4_TILED modifier
checks(Imre Deak)
- Fixed I915_FORMAT_MOD_4_TILED to be 9 instead of 12
(Imre Deak)
v7: - Fixed display_ver to { 13, 13 }(Imre Deak)
- Removed redundant newline(Imre Deak)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211122211420.31584-1-stanislav.lisovskiy@intel.com
|
|
When there is no policy configured on the system, the default policy is
checked in xfrm_route_forward. However, it was done with the wrong
direction (XFRM_POLICY_FWD instead of XFRM_POLICY_OUT).
The default policy for XFRM_POLICY_FWD was checked just before, with a call
to xfrm[46]_policy_check().
CC: stable@vger.kernel.org
Fixes: 2d151d39073a ("xfrm: Add possibility to set the default to block if we have no policy")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Lan966x has: 2 integrated PHYs, 3 SerDes and 2 RGMII interfaces. Which
requires to be muxed based on the HW representation.
So add constants for each interface to be able to distinguish them.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20211116100818.1615762-3-horatiu.vultur@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
drm-misc-next for 5.17:
UAPI Changes:
* Remove restrictions on DMA_BUF_SET_NAME ioctl
* connector: State of privacy screen
* sysfs: Send hotplug uevent
Cross-subsystem Changes:
* clk/bmc-2835: Fixes
* dma-buf: Add dma_resv selftest; Error-handling fixes; Add debugfs
helpers; Remove dma_resv_get_excl_unlocked(); Documentation fixes
* pwm: Introduce of_pwm_single_xlate()
Core Changes:
* Support for privacy screens
* Make drm_irq.c legacy
* Fix __stack_depot_* name conflict
* Documentation fixes
* Fixes and cleanups
* dp-helper: Reuse 8b/10b link-training delay helpers
* format-helper: Update interfaces
* fb-helper: Allocate shadow buffer of correct size
* gem: Link GEM SHMEM and CMA helpers into separate modules; Use
dma_resv iterator; Import DMA_BUF namespace into GEM-helper modules
* gem/shmem-helper: Interface cleanups
* scheduler: Grab fence in drm_sched_job_add_implicit_dependencies();
Lockdep fixes
* kms-helpers: Link several files from core into the KMS-helper module
Driver Changes:
* Use dma_resv_iter in several places
* Fixes and cleanups
* amdgpu: Use drm_kms_helper_connector_hotplug_event(); Get all fences
at once
* bridge: Switch to managed MIPI DSI helpers in several places; Register
and attach during probe in several places; Convert to YAML in several
places
* bridge/anx7625: Support MIPI DPI input; Support HDMI audio; Fixes
* bridge/dw-hdmi: Allow interlace on bridge
* bridge/ps8640: Enable PM; Support aux-bus
* bridge/tc358768: Enabled reference clock; Support pulse mode;
Modesetting fixes
* bridge/ti-sn65dsi86: Use regmap_bulk_write(); Implement PWM
* etnaviv: Get all fences at once
* gma500: GEM object cleanups; Remove generic drivers in probe function
* i915: Support VESA panel backlights
* ingenic: Fixes and cleanups
* kirin: Adjust probe order
* kmb: Enable framebuffer console
* lima: Kconfig fixes
* meson: Refactoring to supperot DRM_BRIDGE_ATTACH_NO_ENCODER
* msm: Fixes and cleanups
* msm/dsi: Adjust probe order
* omap: Fixes and cleanups
* nouveau: CRC fixes; Validate LUTs in atomic check; Set HDMI AVI RGB
quantization to FULL; Fixes and cleanups
* panel: Support Innolux G070Y2-T02, Vivax TPC-9150, JDI R63452,
Newhaven 1.8-128160EF, Wanchanglong W552964ABA, Novatek NT35950,
BOE BF060Y8M, Sony Tulip Truly NT35521; Use dev_err_probe() throughout
drivers; Fixes and cleanups
* panel/ili9881c: Orientation fixes
* radeon: Use dma_resv_wait_timeout()
* rockchip: Add timeout for DSP hold; Suspend/resume fixes; PLL clock
fixes; Implement mmap in GEM object functions
* simpledrm: Support FB_DAMAGE_CLIPS and virtual screen sizes
* sun4i: Use CMA helpers without vmap support
* tidss: Fixes and cleanups
* v3d: Cleanups
* vc4: Fix HDMI-CEC hang when display is off; Power on HDMI controller
while disabling; Support 4k@60 Hz modes; Fixes and cleanups
* video: Convert to sysfs_emit() in several places
* video/omapfb: Fix fall-through
* virtio: Overflow fixes
* xen: Implement mmap as GEM object functions
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YZYZSypIrr+qcih3@linux-uq9g.fritz.box
|
|
The security_task_getsecid_subj() LSM hook invites misuse by allowing
callers to specify a task even though the hook is only safe when the
current task is referenced. Fix this by removing the task_struct
argument to the hook, requiring LSM implementations to use the
current task. While we are changing the hook declaration we also
rename the function to security_current_getsecid_subj() in an effort
to reinforce that the hook captures the subjective credentials of the
current task and not an arbitrary task on the system.
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Allow support for 'enable_iwarp' and 'enable_roce' devlink params to turn
on/off iWARP or RoCE protocol support for E800 devices.
For example, a user can turn on iWARP functionality with,
devlink dev param set pci/0000:07:00.0 name enable_iwarp value true cmode runtime
This add an iWARP auxiliary rdma device, ice.iwarp.<>, under this PF.
A user request to enable both iWARP and RoCE under the same PF is rejected
since this device does not support both protocols simultaneously on the
same port.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Tested-by: Leszek Kaliszczuk <leszek.kaliszczuk@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add a new device generic parameter to enable and disable
iWARP functionality on a multi-protocol RDMA device.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Tested-by: Leszek Kaliszczuk <leszek.kaliszczuk@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
Xin Long
Vladimir Oltean
Archie Pusaka
Luiz Augusto von Dentz
Linus Torvalds
Jiri Slaby
Lukas Bulwahn
Takashi Iwai
Vivek Goyal
Miklos Szeredi
Oder Chiou
Jakub Kicinski
Michael S. Tsirkin
Arnd Bergmann
Pavel Begunkov
Andy Shevchenko
Heikki Krogerus
Matti Vaittinen
Pierre-Louis Bossart
Minchan Kim
Stanislav Lisovskiy
Kuniyuki Iwashima
Kurt Kanzenbach
Juergen Gross
Sakari Ailus
David S. Miller
Yajun Deng
Jeremy Kerr
Samuel Holland
Lukasz Luba
Nicolas Dichtel
Horatiu Vultur
Dave Airlie
Paul Moore
Shiraz Saleem