path: root/init/Kconfig (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-03-12int128: fix __uint128_t compiler test in KconfigMasahiro Yamada1-2/+1
The support for __uint128_t is dependent on the target bit size. GCC that defaults to the 32-bit can still build the 64-bit kernel with -m64 flag passed. However, $(cc-option,-D__SIZEOF_INT128__=0) is evaluated against the default machine bit, which may not match to the kernel it is building. Theoretically, this could be evaluated separately for 64BIT/32BIT. config CC_HAS_INT128 bool default !$(cc-option,$(m64-flag) -D__SIZEOF_INT128__=0) if 64BIT default !$(cc-option,$(m32-flag) -D__SIZEOF_INT128__=0) I simplified it more because the 32-bit compiler is unlikely to support __uint128_t. Fixes: c12d3362a74b ("int128: move __uint128_t compiler test to Kconfig") Reported-by: George Spelvin <lkml@sdf.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: George Spelvin <lkml@sdf.org>
2020-02-26Merge tag 'trace-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds1-3/+2
Pull tracing and bootconfig updates: "Fixes and changes to bootconfig before it goes live in a release. Change in API of bootconfig (before it comes live in a release): - Have a magic value "BOOTCONFIG" in initrd to know a bootconfig exists - Set CONFIG_BOOT_CONFIG to 'n' by default - Show error if "bootconfig" on cmdline but not compiled in - Prevent redefining the same value - Have a way to append values - Added a SELECT BLK_DEV_INITRD to fix a build failure Synthetic event fixes: - Switch to raw_smp_processor_id() for recording CPU value in preempt section. (No care for what the value actually is) - Fix samples always recording u64 values - Fix endianess - Check number of values matches number of fields - Fix a printing bug Fix of trace_printk() breaking postponed start up tests Make a function static that is only used in a single file" * tag 'trace-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: bootconfig: Fix CONFIG_BOOTTIME_TRACING dependency issue bootconfig: Add append value operator support bootconfig: Prohibit re-defining value on same key bootconfig: Print array as multiple commands for legacy command line bootconfig: Reject subkey and value on same parent key tools/bootconfig: Remove unneeded error message silencer bootconfig: Add bootconfig magic word for indicating bootconfig explicitly bootconfig: Set CONFIG_BOOT_CONFIG=n by default tracing: Clear trace_state when starting trace bootconfig: Mark boot_config_checksum() static tracing: Disable trace_printk() on post poned tests tracing: Have synthetic event test use raw_smp_processor_id() tracing: Fix number printing bug in print_synth_event() tracing: Check that number of vals matches number of synth event fields tracing: Make synth_event trace functions endian-correct tracing: Make sure synth_event_trace() example always uses u64
2020-02-25bootconfig: Fix CONFIG_BOOTTIME_TRACING dependency issueMasami Hiramatsu1-1/+1
Since commit d8a953ddde5e ("bootconfig: Set CONFIG_BOOT_CONFIG=n by default") also changed the CONFIG_BOOTTIME_TRACING to select CONFIG_BOOT_CONFIG to show the boot-time tracing on the menu, it introduced wrong dependencies with BLK_DEV_INITRD as below. WARNING: unmet direct dependencies detected for BOOT_CONFIG Depends on [n]: BLK_DEV_INITRD [=n] Selected by [y]: - BOOTTIME_TRACING [=y] && TRACING_SUPPORT [=y] && FTRACE [=y] && TRACING [=y] This makes the CONFIG_BOOT_CONFIG selects CONFIG_BLK_DEV_INITRD to fix this error and make CONFIG_BOOTTIME_TRACING=n by default, so that both boot-time tracing and boot configuration off but those appear on the menu list. Link: http://lkml.kernel.org/r/158264140162.23842.11237423518607465535.stgit@devnote2 Fixes: d8a953ddde5e ("bootconfig: Set CONFIG_BOOT_CONFIG=n by default") Reported-by: Randy Dunlap <rdunlap@infradead.org> Compiled-tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-20bootconfig: Add bootconfig magic word for indicating bootconfig explicitlyMasami Hiramatsu1-1/+1
Add bootconfig magic word to the end of bootconfig on initrd image for indicating explicitly the bootconfig is there. Also tools/bootconfig treats wrong size or wrong checksum or parse error as an error, because if there is a bootconfig magic word, there must be a bootconfig. The bootconfig magic word is "#BOOTCONFIG\n", 12 bytes word. Thus the block image of the initrd file with bootconfig is as follows. [Initrd][bootconfig][size][csum][#BOOTCONFIG\n] Link: http://lkml.kernel.org/r/158220112263.26565.3944814205960612841.stgit@devnote2 Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-20bootconfig: Set CONFIG_BOOT_CONFIG=n by defaultMasami Hiramatsu1-1/+0
Set CONFIG_BOOT_CONFIG=n by default. This also warns user if CONFIG_BOOT_CONFIG=n but "bootconfig" is given in the kernel command line. Link: http://lkml.kernel.org/r/158220111291.26565.9036889083940367969.stgit@devnote2 Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-11Merge tag 'trace-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds1-1/+0
Pull tracing fixes from Steven Rostedt: "Various fixes: - Fix an uninitialized variable - Fix compile bug to bootconfig userspace tool (in tools directory) - Suppress some error messages of bootconfig userspace tool - Remove unneded CONFIG_LIBXBC from bootconfig - Allocate bootconfig xbc_nodes dynamically. To ease complaints about taking up static memory at boot up - Use of parse_args() to parse bootconfig instead of strstr() usage Prevents issues of double quotes containing the interested string - Fix missing ring_buffer_nest_end() on synthetic event error path - Return zero not -EINVAL on soft disabled synthetic event (soft disabling must be the same as hard disabling, which returns zero) - Consolidate synthetic event code (remove duplicate code)" * tag 'trace-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Consolidate trace() functions tracing: Don't return -EINVAL when tracing soft disabled synth events tracing: Add missing nest end to synth_event_trace_start() error case tools/bootconfig: Suppress non-error messages bootconfig: Allocate xbc_nodes array dynamically bootconfig: Use parse_args() to find bootconfig and '--' tracing/kprobe: Fix uninitialized variable bug bootconfig: Remove unneeded CONFIG_LIBXBC tools/bootconfig: Fix wrong __VA_ARGS__ usage
2020-02-10bootconfig: Remove unneeded CONFIG_LIBXBCMasami Hiramatsu1-1/+0
Since there is no user except CONFIG_BOOT_CONFIG and no plan to use it from other functions, CONFIG_LIBXBC can be removed and we can use CONFIG_BOOT_CONFIG directly. Link: http://lkml.kernel.org/r/158098769281.939.16293492056419481105.stgit@devnote2 Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-06Merge tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds1-0/+14
Pull tracing updates from Steven Rostedt: - Added new "bootconfig". This looks for a file appended to initrd to add boot config options, and has been discussed thoroughly at Linux Plumbers. Very useful for adding kprobes at bootup. Only enabled if "bootconfig" is on the real kernel command line. - Created dynamic event creation. Merges common code between creating synthetic events and kprobe events. - Rename perf "ring_buffer" structure to "perf_buffer" - Rename ftrace "ring_buffer" structure to "trace_buffer" Had to rename existing "trace_buffer" to "array_buffer" - Allow trace_printk() to work withing (some) tracing code. - Sort of tracing configs to be a little better organized - Fixed bug where ftrace_graph hash was not being protected properly - Various other small fixes and clean ups * tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (88 commits) bootconfig: Show the number of nodes on boot message tools/bootconfig: Show the number of bootconfig nodes bootconfig: Add more parse error messages bootconfig: Use bootconfig instead of boot config ftrace: Protect ftrace_graph_hash with ftrace_sync ftrace: Add comment to why rcu_dereference_sched() is open coded tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu tracing: Annotate ftrace_graph_hash pointer with __rcu bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline tracing: Use seq_buf for building dynevent_cmd string tracing: Remove useless code in dynevent_arg_pair_add() tracing: Remove check_arg() callbacks from dynevent args tracing: Consolidate some synth_event_trace code tracing: Fix now invalid var_ref_vals assumption in trace action tracing: Change trace_boot to use synth_event interface tracing: Move tracing selftests to bottom of menu tracing: Move mmio tracer config up with the other tracers tracing: Move tracing test module configs together tracing: Move all function tracing configs together tracing: Documentation for in-kernel synthetic event API ...
2020-01-28Merge tag 'for-linus-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds1-0/+1
Pull UML updates from Anton Ivanov: "I am sending this on behalf of Richard who is traveling. This contains the following changes for UML: - Fix for time travel mode - Disable CONFIG_CONSTRUCTORS again - A new command line option to have an non-raw serial line - Preparations to remove obsolete UML network drivers" * tag 'for-linus-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Fix time-travel=inf-cpu with xor/raid6 Revert "um: Enable CONFIG_CONSTRUCTORS" um: Mark non-vector net transports as obsolete um: Add an option to make serial driver non-raw
2020-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds1-0/+7
Pull networking updates from David Miller: 1) Add WireGuard 2) Add HE and TWT support to ath11k driver, from John Crispin. 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca. 4) Add variable window congestion control to TIPC, from Jon Maloy. 5) Add BCM84881 PHY driver, from Russell King. 6) Start adding netlink support for ethtool operations, from Michal Kubecek. 7) Add XDP drop and TX action support to ena driver, from Sameeh Jubran. 8) Add new ipv4 route notifications so that mlxsw driver does not have to handle identical routes itself. From Ido Schimmel. 9) Add BPF dynamic program extensions, from Alexei Starovoitov. 10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes. 11) Add support for macsec HW offloading, from Antoine Tenart. 12) Add initial support for MPTCP protocol, from Christoph Paasch, Matthieu Baerts, Florian Westphal, Peter Krystad, and many others. 13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu Cherian, and others. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits) net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC udp: segment looped gso packets correctly netem: change mailing list qed: FW debug features qed: rt init valid initialization changed qed: Debug feature: ilt and mdump qed: FW Add fw overlay feature qed: FW HSI changes qed: FW iscsi/fcoe changes qed: Add abstraction for different hsi values per chip qed: FW Additional ll2 type qed: Use dmae to write to widebus registers in fw_funcs qed: FW Parser offsets modified qed: FW Queue Manager changes qed: FW Expose new registers and change windows qed: FW Internal ram offsets modifications MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver Documentation: net: octeontx2: Add RVU HW and drivers overview octeontx2-pf: ethtool RSS config support octeontx2-pf: Add basic ethtool support ...
2020-01-28Merge branch 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-1/+1
Pull objtool updates from Ingo Molnar: "The main changes are to move the ORC unwind table sorting from early init to build-time - this speeds up booting. No change in functionality intended" * 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/unwind/orc: Fix !CONFIG_MODULES build warning x86/unwind/orc: Remove boot-time ORC unwind tables sorting scripts/sorttable: Implement build-time ORC unwind table sorting scripts/sorttable: Rename 'sortextable' to 'sorttable' scripts/sortextable: Refactor the do_func() function scripts/sortextable: Remove dead code scripts/sortextable: Clean up the code to meet the kernel coding style better scripts/sortextable: Rewrite error/success handling
2020-01-21bootconfig: Fix Kconfig help message for BOOT_CONFIGMasami Hiramatsu1-1/+3
Fix Kconfig help message since the bootconfig file is only available to be appended to initramfs. And also add a reference to the documentation. Link: http://lkml.kernel.org/r/157949058031.25888.18399447161895787505.stgit@devnote2 Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-01-19Revert "um: Enable CONFIG_CONSTRUCTORS"Johannes Berg1-0/+1
This reverts commit 786b2384bf1c ("um: Enable CONFIG_CONSTRUCTORS"). There are two issues with this commit, uncovered by Anton in tests on some (Debian) systems: 1) I completely forgot to call any constructors if CONFIG_CONSTRUCTORS isn't set. Don't recall now if it just wasn't needed on my system, or if I never tested this case. 2) With that fixed, it works - with CONFIG_CONSTRUCTORS *unset*. If I set CONFIG_CONSTRUCTORS, it fails again, which isn't totally unexpected since whatever wanted to run is likely to have to run before the kernel init etc. that calls the constructors in this case. Basically, some constructors that gcc emits (libc has?) need to run very early during init; the failure mode otherwise was that the ptrace fork test already failed: ---------------------- $ ./linux mem=512M Core dump limits : soft - 0 hard - NONE Checking that ptrace can change system call numbers...check_ptrace : child exited with exitcode 6, while expecting 0; status 0x67f Aborted ---------------------- Thinking more about this, it's clear that we simply cannot support CONFIG_CONSTRUCTORS in UML. All the cases we need now (gcov, kasan) involve not use of the __attribute__((constructor)), but instead some constructor code/entry generated by gcc. Therefore, we cannot distinguish between kernel constructors and system constructors. Thus, revert this commit. Cc: stable@vger.kernel.org [5.4+] Fixes: 786b2384bf1c ("um: Enable CONFIG_CONSTRUCTORS") Reported-by: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.co.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-01-14lib/vdso: Prepare for time namespace supportThomas Gleixner1-0/+1
To support time namespaces in the vdso with a minimal impact on regular non time namespace affected tasks, the namespace handling needs to be hidden in a slow path. The most obvious place is vdso_seq_begin(). If a task belongs to a time namespace then the VVAR page which contains the system wide vdso data is replaced with a namespace specific page which has the same layout as the VVAR page. That page has vdso_data->seq set to 1 to enforce the slow path and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time namespace handling path. The extra check in the case that vdso_data->seq is odd, e.g. a concurrent update of the vdso data is in progress, is not really affecting regular tasks which are not part of a time namespace as the task is spin waiting for the update to finish and vdso_data->seq to become even again. If a time namespace task hits that code path, it invokes the corresponding time getter function which retrieves the real VVAR page, reads host time and then adds the offset for the requested clock which is stored in the special VVAR page. If VDSO time namespace support is disabled the whole magic is compiled out. Initial testing shows that the disabled case is almost identical to the host case which does not take the slow timens path. With the special timens page installed the performance hit is constant time and in the range of 5-7%. For the vdso functions which are not using the sequence count an unconditional check for vdso_data->clock_mode is added which switches to the real vdso when the clock_mode is VCLOCK_TIMENS. [avagin: Make do_hres_timens() work with raw clocks too: choose vdso_data pointer by CS_RAW offset.] Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20191112012724.250792-21-dima@arista.com
2020-01-14ns: Introduce Time NamespaceAndrei Vagin1-0/+7
Time Namespace isolates clock values. The kernel provides access to several clocks CLOCK_REALTIME, CLOCK_MONOTONIC, CLOCK_BOOTTIME, etc. CLOCK_REALTIME System-wide clock that measures real (i.e., wall-clock) time. CLOCK_MONOTONIC Clock that cannot be set and represents monotonic time since some unspecified starting point. CLOCK_BOOTTIME Identical to CLOCK_MONOTONIC, except it also includes any time that the system is suspended. For many users, the time namespace means the ability to changes date and time in a container (CLOCK_REALTIME). Providing per namespace notions of CLOCK_REALTIME would be complex with a massive overhead, but has a dubious value. But in the context of checkpoint/restore functionality, monotonic and boottime clocks become interesting. Both clocks are monotonic with unspecified starting points. These clocks are widely used to measure time slices and set timers. After restoring or migrating processes, it has to be guaranteed that they never go backward. In an ideal case, the behavior of these clocks should be the same as for a case when a whole system is suspended. All this means that it is required to set CLOCK_MONOTONIC and CLOCK_BOOTTIME clocks, which can be achieved by adding per-namespace offsets for clocks. A time namespace is similar to a pid namespace in the way how it is created: unshare(CLONE_NEWTIME) system call creates a new time namespace, but doesn't set it to the current process. Then all children of the process will be born in the new time namespace, or a process can use the setns() system call to join a namespace. This scheme allows setting clock offsets for a namespace, before any processes appear in it. All available clone flags have been used, so CLONE_NEWTIME uses the highest bit of CSIGNAL. It means that it can be used only with the unshare() and the clone3() system calls. [ tglx: Adjusted paragraph about clone3() to reality and massaged the changelog a bit. ] Co-developed-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://criu.org/Time_namespace Link: https://lists.openvz.org/pipermail/criu/2018-June/041504.html Link: https://lore.kernel.org/r/20191112012724.250792-4-dima@arista.com
2020-01-13bootconfig: Load boot config from the tail of initrdMasami Hiramatsu1-0/+1
Load the extended boot config data from the tail of initrd image. If there is an SKC data there, it has [(u32)size][(u32)checksum] header (in really, this is a footer) at the end of initrd. If the checksum (simple sum of bytes) is match, this starts parsing it from there. Link: http://lkml.kernel.org/r/157867222435.17873.9936667353335606867.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-01-13bootconfig: Add Extra Boot Config supportMasami Hiramatsu1-0/+11
Extra Boot Config (XBC) allows admin to pass a tree-structured boot configuration file when boot up the kernel. This extends the kernel command line in an efficient way. Boot config will contain some key-value commands, e.g. key.word = value1 another.key.word = value2 It can fold same keys with braces, also you can write array data. For example, key { word1 { setting1 = data setting2 } word2.array = "val1", "val2" } User can access these key-value pair and tree structure via SKC APIs. Link: http://lkml.kernel.org/r/157867221257.17873.1775090991929862549.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-12-13scripts/sorttable: Rename 'sortextable' to 'sorttable'Shile Zhang1-1/+1
Use a more generic name for additional table sorting usecases, such as the upcoming ORC table sorting feature. This tool is not tied to exception table sorting anymore. No functional changes intended. [ mingo: Rewrote the changelog. ] Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: linux-kbuild@vger.kernel.org Link: https://lkml.kernel.org/r/20191204004633.88660-6-shile.zhang@linux.alibaba.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-11bpf, x86, arm64: Enable jit by default when not built as always-onDaniel Borkmann1-0/+7
After Spectre 2 fix via 290af86629b2 ("bpf: introduce BPF_JIT_ALWAYS_ON config") most major distros use BPF_JIT_ALWAYS_ON configuration these days which compiles out the BPF interpreter entirely and always enables the JIT. Also given recent fix in e1608f3fa857 ("bpf: Avoid setting bpf insns pages read-only when prog is jited"), we additionally avoid fragmenting the direct map for the BPF insns pages sitting in the general data heap since they are not used during execution. Latter is only needed when run through the interpreter. Since both x86 and arm64 JITs have seen a lot of exposure over the years, are generally most up to date and maintained, there is more downside in !BPF_JIT_ALWAYS_ON configurations to have the interpreter enabled by default rather than the JIT. Add a ARCH_WANT_DEFAULT_BPF_JIT config which archs can use to set the bpf_jit_{enable,kallsyms} to 1. Back in the days the bpf_jit_kallsyms knob was set to 0 by default since major distros still had /proc/kallsyms addresses exposed to unprivileged user space which is not the case anymore. Hence both knobs are set via BPF_JIT_DEFAULT_ON which is set to 'y' in case of BPF_JIT_ALWAYS_ON or ARCH_WANT_DEFAULT_BPF_JIT. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Will Deacon <will@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/f78ad24795c2966efcc2ee19025fa3459f622185.1575903816.git.daniel@iogearbox.net
2019-12-04init/Kconfig: fix indentationKrzysztof Kozlowski1-38/+38
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ / /' -i */Kconfig Link: http://lkml.kernel.org/r/1574306670-30234-1-git-send-email-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: Jiri Kosina <trivial@kernel.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-02Merge tag 'kbuild-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds1-21/+1
Pull Kbuild updates from Masahiro Yamada: - remove unneeded asm headers from hexagon, ia64 - add 'dir-pkg' target, which works like 'tar-pkg' but skips archiving - add 'helpnewconfig' target, which shows help for new CONFIG options - support 'make nsdeps' for external modules - make rebuilds faster by deleting $(wildcard $^) checks - remove compile tests for kernel-space headers - refactor modpost to simplify modversion handling - make single target builds faster - optimize and clean up scripts/kallsyms.c - refactor various Makefiles and scripts * tag 'kbuild-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (59 commits) MAINTAINERS: update Kbuild/Kconfig maintainer's email address scripts/kallsyms: remove redundant initializers scripts/kallsyms: put check_symbol_range() calls close together scripts/kallsyms: make check_symbol_range() void function scripts/kallsyms: move ignored symbol types to is_ignored_symbol() scripts/kallsyms: move more patterns to the ignored_prefixes array scripts/kallsyms: skip ignored symbols very early scripts/kallsyms: add const qualifiers where possible scripts/kallsyms: make find_token() return (unsigned char *) scripts/kallsyms: replace prefix_underscores_count() with strspn() scripts/kallsyms: add sym_name() to mitigate cast ugliness scripts/kallsyms: remove unneeded length check for prefix matching scripts/kallsyms: remove redundant is_arm_mapping_symbol() scripts/kallsyms: set relative_base more effectively scripts/kallsyms: shrink table before sorting it scripts/kallsyms: fix definitely-lost memory leak scripts/kallsyms: remove unneeded #ifndef ARRAY_SIZE kbuild: make single target builds even faster modpost: respect the previous export when 'exported twice' is warned modpost: do not set ->preloaded for symbols from Module.symvers ...
2019-12-01Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds1-17/+0
Pull sysctl system call removal from Eric Biederman: "As far as I can tell we have reached the point where no one enables the sysctl system call anymore. It still is enabled in a few defconfigs but they are mostly the rarely used one and in asking people about that it was more cut & paste enabled than anything else. This is single commit that just deletes code. Leaving just enough code so that the deprecated sysctl warning continues to be printed. If my analysis turns out to be wrong and someone actually cares it will be easy to revert this commit and have the system call again. There was one new xtensa defconfig in linux-next that enabled the system call this cycle and when asked about it the maintainer of the code replied that it was not enabled on purpose. As of today's linux-next tree that defconfig no longer enables the system call. What we saw in the review discussion was that if we go a step farther than my patch and mess with uapi headers there are pieces of code that won't compile, but nothing minds the system call actually disappearing from the kernel" Link: https://lore.kernel.org/lkml/201910011140.EA0181F13@keescook/ * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: sysctl: Remove the sysctl system call
2019-11-26sysctl: Remove the sysctl system callEric W. Biederman1-17/+0
This system call has been deprecated almost since it was introduced, and in a survey of the linux distributions I can no longer find any of them that enable CONFIG_SYSCTL_SYSCALL. The only indication that I can find that anyone might care is that a few of the defconfigs in the kernel enable CONFIG_SYSCTL_SYSCALL. However this appears in only 31 of 414 defconfigs in the kernel, so I suspect this symbols presence is simply because it is harmless to include rather than because it is necessary. As there appear to be no users of the sysctl system call, remove the code. As this removes one of the few uses of the internal kernel mount of proc I hope this allows for even more simplifications of the proc filesystem. Cc: Alex Smith <alex.smith@imgtec.com> Cc: Anders Berg <anders.berg@lsi.com> Cc: Apelete Seketeli <apelete@seketeli.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Chee Nouk Phoon <cnphoon@altera.com> Cc: Chris Zankel <chris@zankel.net> Cc: Christian Ruppert <christian.ruppert@abilis.com> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Harvey Hunt <harvey.hunt@imgtec.com> Cc: Helge Deller <deller@gmx.de> Cc: Hongliang Tao <taohl@lemote.com> Cc: Hua Yan <yanh@lemote.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <blogic@openwrt.org> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: Jun Nie <jun.nie@linaro.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Kevin Wells <kevin.wells@nxp.com> Cc: Kumar Gala <galak@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Noam Camus <noamc@ezchip.com> Cc: Olof Johansson <olof@lixom.net> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Pierrick Hascoet <pierrick.hascoet@abilis.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Roland Stigge <stigge@antcom.de> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Scott Telford <stelford@cadence.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Tanmay Inamdar <tinamdar@apm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-11-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-0/+4
Pull crypto updates from Herbert Xu: "API: - Add library interfaces of certain crypto algorithms for WireGuard - Remove the obsolete ablkcipher and blkcipher interfaces - Move add_early_randomness() out of rng_mutex Algorithms: - Add blake2b shash algorithm - Add blake2s shash algorithm - Add curve25519 kpp algorithm - Implement 4 way interleave in arm64/gcm-ce - Implement ciphertext stealing in powerpc/spe-xts - Add Eric Biggers's scalar accelerated ChaCha code for ARM - Add accelerated 32r2 code from Zinc for MIPS - Add OpenSSL/CRYPTOGRAMS poly1305 implementation for ARM and MIPS Drivers: - Fix entropy reading failures in ks-sa - Add support for sam9x60 in atmel - Add crypto accelerator for amlogic GXL - Add sun8i-ce Crypto Engine - Add sun8i-ss cryptographic offloader - Add a host of algorithms to inside-secure - Add NPCM RNG driver - add HiSilicon HPRE accelerator - Add HiSilicon TRNG driver" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (285 commits) crypto: vmx - Avoid weird build failures crypto: lib/chacha20poly1305 - use chacha20_crypt() crypto: x86/chacha - only unregister algorithms if registered crypto: chacha_generic - remove unnecessary setkey() functions crypto: amlogic - enable working on big endian kernel crypto: sun8i-ce - enable working on big endian crypto: mips/chacha - select CRYPTO_SKCIPHER, not CRYPTO_BLKCIPHER hwrng: ks-sa - Enable COMPILE_TEST crypto: essiv - remove redundant null pointer check before kfree crypto: atmel-aes - Change data type for "lastc" buffer crypto: atmel-tdes - Set the IV after {en,de}crypt crypto: sun4i-ss - fix big endian issues crypto: sun4i-ss - hide the Invalid keylen message crypto: sun4i-ss - use crypto_ahash_digestsize crypto: sun4i-ss - remove dependency on not 64BIT crypto: sun4i-ss - Fix 64-bit size_t warnings on sun4i-ss-hash.c MAINTAINERS: Add maintainer for HiSilicon SEC V2 driver crypto: hisilicon - add DebugFS for HiSilicon SEC Documentation: add DebugFS doc for HiSilicon SEC crypto: hisilicon - add SRIOV for HiSilicon SEC ...
2019-11-17int128: move __uint128_t compiler test to KconfigArd Biesheuvel1-0/+4
In order to use 128-bit integer arithmetic in C code, the architecture needs to have declared support for it by setting ARCH_SUPPORTS_INT128, and it requires a version of the toolchain that supports this at build time. This is why all existing tests for ARCH_SUPPORTS_INT128 also test whether __SIZEOF_INT128__ is defined, since this is only the case for compilers that can support 128-bit integers. Let's fold this additional test into the Kconfig declaration of ARCH_SUPPORTS_INT128 so that we can also use the symbol in Makefiles, e.g., to decide whether a certain object needs to be included in the first place. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-15kbuild: remove header compile testMasahiro Yamada1-21/+1
There are both positive and negative options about this feature. At first, I thought it was a good idea, but actually Linus stated a negative opinion (https://lkml.org/lkml/2019/9/29/227). I admit it is ugly and annoying. The baseline I'd like to keep is the compile-test of uapi headers. (Otherwise, kernel developers have no way to ensure the correctness of the exported headers.) I will maintain a small build rule in usr/include/Makefile. Remove the other header test functionality. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-10-29io_uring: replace workqueue usage with io-wqJens Axboe1-0/+1
Drop various work-arounds we have for workqueues: - We no longer need the async_list for tracking sequential IO. - We don't have to maintain our own mm tracking/setting. - We don't need a separate workqueue for buffered writes. This didn't even work that well to begin with, as it was suboptimal for multiple buffered writers on multiple files. - We can properly cancel pending interruptible work. This fixes deadlocks with particularly socket IO, where we cannot cancel them when the io_uring is closed. Hence the ring will wait forever for these requests to complete, which may never happen. This is different from disk IO where we know requests will complete in a finite amount of time. - Due to being able to cancel work interruptible work that is already running, we can implement file table support for work. We need that for supporting system calls that add to a process file table. - It gets us one step closer to adding async support for any system call. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-28Merge branch 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds1-0/+5
Pull kernel lockdown mode from James Morris: "This is the latest iteration of the kernel lockdown patchset, from Matthew Garrett, David Howells and others. From the original description: This patchset introduces an optional kernel lockdown feature, intended to strengthen the boundary between UID 0 and the kernel. When enabled, various pieces of kernel functionality are restricted. Applications that rely on low-level access to either hardware or the kernel may cease working as a result - therefore this should not be enabled without appropriate evaluation beforehand. The majority of mainstream distributions have been carrying variants of this patchset for many years now, so there's value in providing a doesn't meet every distribution requirement, but gets us much closer to not requiring external patches. There are two major changes since this was last proposed for mainline: - Separating lockdown from EFI secure boot. Background discussion is covered here: https://lwn.net/Articles/751061/ - Implementation as an LSM, with a default stackable lockdown LSM module. This allows the lockdown feature to be policy-driven, rather than encoding an implicit policy within the mechanism. The new locked_down LSM hook is provided to allow LSMs to make a policy decision around whether kernel functionality that would allow tampering with or examining the runtime state of the kernel should be permitted. The included lockdown LSM provides an implementation with a simple policy intended for general purpose use. This policy provides a coarse level of granularity, controllable via the kernel command line: lockdown={integrity|confidentiality} Enable the kernel lockdown feature. If set to integrity, kernel features that allow userland to modify the running kernel are disabled. If set to confidentiality, kernel features that allow userland to extract confidential information from the kernel are also disabled. This may also be controlled via /sys/kernel/security/lockdown and overriden by kernel configuration. New or existing LSMs may implement finer-grained controls of the lockdown features. Refer to the lockdown_reason documentation in include/linux/security.h for details. The lockdown feature has had signficant design feedback and review across many subsystems. This code has been in linux-next for some weeks, with a few fixes applied along the way. Stephen Rothwell noted that commit 9d1f8be5cf42 ("bpf: Restrict bpf when kernel lockdown is in confidentiality mode") is missing a Signed-off-by from its author. Matthew responded that he is providing this under category (c) of the DCO" * 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (31 commits) kexec: Fix file verification on S390 security: constify some arrays in lockdown LSM lockdown: Print current->comm in restriction messages efi: Restrict efivar_ssdt_load when the kernel is locked down tracefs: Restrict tracefs when the kernel is locked down debugfs: Restrict debugfs when the kernel is locked down kexec: Allow kexec_file() with appropriate IMA policy when locked down lockdown: Lock down perf when in confidentiality mode bpf: Restrict bpf when kernel lockdown is in confidentiality mode lockdown: Lock down tracing and perf kprobes when in confidentiality mode lockdown: Lock down /proc/kcore x86/mmiotrace: Lock down the testmmiotrace module lockdown: Lock down module params that specify hardware parameters (eg. ioport) lockdown: Lock down TIOCSSERIAL lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down acpi: Disable ACPI table override if the kernel is locked down acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down ACPI: Limit access to custom_method when the kernel is locked down x86/msr: Restrict MSR access when the kernel is locked down x86: Lock down IO port access when the kernel is locked down ...
2019-09-27Merge branch 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrityLinus Torvalds1-1/+5
Pull integrity updates from Mimi Zohar: "The major feature in this time is IMA support for measuring and appraising appended file signatures. In addition are a couple of bug fixes and code cleanup to use struct_size(). In addition to the PE/COFF and IMA xattr signatures, the kexec kernel image may be signed with an appended signature, using the same scripts/sign-file tool that is used to sign kernel modules. Similarly, the initramfs may contain an appended signature. This contained a lot of refactoring of the existing appended signature verification code, so that IMA could retain the existing framework of calculating the file hash once, storing it in the IMA measurement list and extending the TPM, verifying the file's integrity based on a file hash or signature (eg. xattrs), and adding an audit record containing the file hash, all based on policy. (The IMA support for appended signatures patch set was posted and reviewed 11 times.) The support for appended signature paves the way for adding other signature verification methods, such as fs-verity, based on a single system-wide policy. The file hash used for verifying the signature and the signature, itself, can be included in the IMA measurement list" * 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: ima_api: Use struct_size() in kzalloc() ima: use struct_size() in kzalloc() sefltest/ima: support appended signatures (modsig) ima: Fix use after free in ima_read_modsig() MODSIGN: make new include file self contained ima: fix freeing ongoing ahash_request ima: always return negative code for error ima: Store the measurement again when appraising a modsig ima: Define ima-modsig template ima: Collect modsig ima: Implement support for module-style appended signatures ima: Factor xattr_verify() out of ima_appraise_measurement() ima: Add modsig appraise_type option for module-style appended signatures integrity: Select CONFIG_KEYS instead of depending on it PKCS#7: Introduce pkcs7_get_digest() PKCS#7: Refactor verify_pkcs7_signature() MODSIGN: Export module signature definitions ima: initialize the "template" field with the default template
2019-09-22Merge tag 'modules-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linuxLinus Torvalds1-3/+30
Pull modules updates from Jessica Yu: "The main bulk of this pull request introduces a new exported symbol namespaces feature. The number of exported symbols is increasingly growing with each release (we're at about 31k exports as of 5.3-rc7) and we currently have no way of visualizing how these symbols are "clustered" or making sense of this huge export surface. Namespacing exported symbols allows kernel developers to more explicitly partition and categorize exported symbols, as well as more easily limiting the availability of namespaced symbols to other parts of the kernel. For starters, we have introduced the USB_STORAGE namespace to demonstrate the API's usage. I have briefly summarized the feature and its main motivations in the tag below. Summary: - Introduce exported symbol namespaces. This new feature allows subsystem maintainers to partition and categorize their exported symbols into explicit namespaces. Module authors are now required to import the namespaces they need. Some of the main motivations of this feature include: allowing kernel developers to better manage the export surface, allow subsystem maintainers to explicitly state that usage of some exported symbols should only be limited to certain users (think: inter-module or inter-driver symbols, debugging symbols, etc), as well as more easily limiting the availability of namespaced symbols to other parts of the kernel. With the module import requirement, it is also easier to spot the misuse of exported symbols during patch review. Two new macros are introduced: EXPORT_SYMBOL_NS() and EXPORT_SYMBOL_NS_GPL(). The API is thoroughly documented in Documentation/kbuild/namespaces.rst. - Some small code and kbuild cleanups here and there" * tag 'modules-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: Remove leftover '#undef' from export header module: remove unneeded casts in cmp_name() module: move CONFIG_UNUSED_SYMBOLS to the sub-menu of MODULES module: remove redundant 'depends on MODULES' module: Fix link failure due to invalid relocation on namespace offset usb-storage: export symbols in USB_STORAGE namespace usb-storage: remove single-use define for debugging docs: Add documentation for Symbol Namespaces scripts: Coccinelle script for namespace dependencies. modpost: add support for generating namespace dependencies export: allow definition default namespaces in Makefiles or sources module: add config option MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS modpost: add support for symbol namespaces module: add support for symbol namespaces. export: explicitly align struct kernel_symbol module: support reading multiple values per modinfo tag
2019-09-21Merge tag 'for-linus-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds1-1/+0
Pull UML updates from Richard Weinberger: - virtio support - fixes for our new time travel mode - various improvements to make lockdep and kasan work better - SPDX header updates * tag 'for-linus-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: (25 commits) um: irq: Fix LAST_IRQ usage in init_IRQ() um: Add SPDX headers for files in arch/um/include um: Add SPDX headers for files in arch/um/os-Linux um: Add SPDX headers to files in arch/um/kernel/ um: Add SPDX headers for files in arch/um/drivers um: virtio: Implement VHOST_USER_PROTOCOL_F_REPLY_ACK um: virtio: Implement VHOST_USER_PROTOCOL_F_SLAVE_REQ um: drivers: Add virtio vhost-user driver um: Use real DMA barriers um: Don't use generic barrier.h um: time-travel: Restrict time update in IRQ handler um: time-travel: Fix periodic timers um: Enable CONFIG_CONSTRUCTORS um: Place (soft)irq text with macros um: Fix VDSO compiler warning um: Implement TRACE_IRQFLAGS_SUPPORT um: Remove misleading #define ARCh_IRQ_ENABLED um: Avoid using uninitialized regs um: Remove sig_info[SIGALRM] um: Error handling fixes in vector drivers ...
2019-09-21Merge tag 'compiler-attributes-for-linus-v5.4' of git://github.com/ojeda/linuxLinus Torvalds1-0/+3
Pull asm inline support from Miguel Ojeda: "Make use of gcc 9's "asm inline()" (Rasmus Villemoes): gcc 9+ (and gcc 8.3, 7.5) provides a way to override the otherwise crude heuristic that gcc uses to estimate the size of the code represented by an asm() statement. From the gcc docs If you use 'asm inline' instead of just 'asm', then for inlining purposes the size of the asm is taken as the minimum size, ignoring how many instructions GCC thinks it is. For compatibility with older compilers, we obviously want a #if [understands asm inline] #define asm_inline asm inline #else #define asm_inline asm #endif But since we #define the identifier inline to attach some attributes, we have to use an alternate spelling of that keyword. gcc provides both __inline__ and __inline, and we currently #define both to inline, so they all have the same semantics. We have to free up one of __inline__ and __inline, and the latter is by far the easiest. The two x86 changes cause smaller code gen differences than I'd expect, but I think we do want the asm_inline thing available sooner or later, so this is just to get the ball rolling" * tag 'compiler-attributes-for-linus-v5.4' of git://github.com/ojeda/linux: x86: bug.h: use asm_inline in _BUG_FLAGS definitions x86: alternative.h: use asm_inline for all alternative variants compiler-types.h: add asm_inline definition compiler_types.h: don't #define __inline lib/zstd/mem.h: replace __inline by inline staging: rtl8723bs: replace __inline by inline
2019-09-20Merge tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds1-6/+20
Pull Kbuild updates from Masahiro Yamada: - add modpost warn exported symbols marked as 'static' because 'static' and EXPORT_SYMBOL is an odd combination - break the build early if gold linker is used - optimize the Bison rule to produce .c and .h files by a single pattern rule - handle PREEMPT_RT in the module vermagic and UTS_VERSION - warn CONFIG options leaked to the user-space except existing ones - make single targets work properly - rebuild modules when module linker scripts are updated - split the module final link stage into scripts/Makefile.modfinal - fix the missed error code in merge_config.sh - improve the error message displayed on the attempt of the O= build in unclean source tree - remove 'clean-dirs' syntax - disable -Wimplicit-fallthrough warning for Clang - add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC - remove ARCH_{CPP,A,C}FLAGS variables - add $(BASH) to run bash scripts - change *CFLAGS_<basetarget>.o to take the relative path to $(obj) instead of the basename - stop suppressing Clang's -Wunused-function warnings when W=1 - fix linux/export.h to avoid genksyms calculating CRC of trimmed exported symbols - misc cleanups * tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (63 commits) genksyms: convert to SPDX License Identifier for lex.l and parse.y modpost: use __section in the output to *.mod.c modpost: use MODULE_INFO() for __module_depends export.h, genksyms: do not make genksyms calculate CRC of trimmed symbols export.h: remove defined(__KERNEL__), which is no longer needed kbuild: allow Clang to find unused static inline functions for W=1 build kbuild: rename KBUILD_ENABLE_EXTRA_GCC_CHECKS to KBUILD_EXTRA_WARN kbuild: refactor scripts/Makefile.extrawarn merge_config.sh: ignore unwanted grep errors kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj) modpost: add NOFAIL to strndup modpost: add guid_t type definition kbuild: add $(BASH) to run scripts with bash-extension kbuild: remove ARCH_{CPP,A,C}FLAGS kbuild,arc: add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 for ARC kbuild: Do not enable -Wimplicit-fallthrough for clang for now kbuild: clean up subdir-ymn calculation in Makefile.clean kbuild: remove unneeded '+' marker from cmd_clean kbuild: remove clean-dirs syntax kbuild: check clean srctree even earlier ...
2019-09-16Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-0/+22
Pull scheduler updates from Ingo Molnar: - MAINTAINERS: Add Mark Rutland as perf submaintainer, Juri Lelli and Vincent Guittot as scheduler submaintainers. Add Dietmar Eggemann, Steven Rostedt, Ben Segall and Mel Gorman as scheduler reviewers. As perf and the scheduler is getting bigger and more complex, document the status quo of current responsibilities and interests, and spread the review pain^H^H^H^H fun via an increase in the Cc: linecount generated by scripts/get_maintainer.pl. :-) - Add another series of patches that brings the -rt (PREEMPT_RT) tree closer to mainline: split the monolithic CONFIG_PREEMPT dependencies into a new CONFIG_PREEMPTION category that will allow the eventual introduction of CONFIG_PREEMPT_RT. Still a few more hundred patches to go though. - Extend the CPU cgroup controller with uclamp.min and uclamp.max to allow the finer shaping of CPU bandwidth usage. - Micro-optimize energy-aware wake-ups from O(CPUS^2) to O(CPUS). - Improve the behavior of high CPU count, high thread count applications running under cpu.cfs_quota_us constraints. - Improve balancing with SCHED_IDLE (SCHED_BATCH) tasks present. - Improve CPU isolation housekeeping CPU allocation NUMA locality. - Fix deadline scheduler bandwidth calculations and logic when cpusets rebuilds the topology, or when it gets deadline-throttled while it's being offlined. - Convert the cpuset_mutex to percpu_rwsem, to allow it to be used from setscheduler() system calls without creating global serialization. Add new synchronization between cpuset topology-changing events and the deadline acceptance tests in setscheduler(), which were broken before. - Rework the active_mm state machine to be less confusing and more optimal. - Rework (simplify) the pick_next_task() slowpath. - Improve load-balancing on AMD EPYC systems. - ... and misc cleanups, smaller fixes and improvements - please see the Git log for more details. * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) sched/psi: Correct overly pessimistic size calculation sched/fair: Speed-up energy-aware wake-ups sched/uclamp: Always use 'enum uclamp_id' for clamp_id values sched/uclamp: Update CPU's refcount on TG's clamp changes sched/uclamp: Use TG's clamps to restrict TASK's clamps sched/uclamp: Propagate system defaults to the root group sched/uclamp: Propagate parent clamps sched/uclamp: Extend CPU's cgroup controller sched/topology: Improve load balancing on AMD EPYC systems arch, ia64: Make NUMA select SMP sched, perf: MAINTAINERS update, add submaintainers and reviewers sched/fair: Use rq_lock/unlock in online_fair_sched_group cpufreq: schedutil: fix equation in comment sched: Rework pick_next_task() slow-path sched: Allow put_prev_task() to drop rq->lock sched/fair: Expose newidle_balance() sched: Add task_struct pointer to sched_class::set_curr_task sched: Rework CPU hotplug task selection sched/{rt,deadline}: Fix set_next_task vs pick_next_task sched: Fix kerneldoc comment for ia64_set_curr_task ...
2019-09-15um: Enable CONFIG_CONSTRUCTORSJohannes Berg1-1/+0
We do need to call the constructors for *modules*, and at least for KASAN in the future, we must call even the kernel constructors only later when the kernel has been initialized. Instead of relying on libc to call them, emit an empty section for libc and let the kernel's CONSTRUCTORS code do the rest of the job. Tested that it indeed doesn't work in modules, and does work after the fixes in both, with a few functions with __attribute__((constructor)) in both dynamic and static builds. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-09-15compiler-types.h: add asm_inline definitionRasmus Villemoes1-0/+3
This adds an asm_inline macro which expands to "asm inline" [1] when the compiler supports it. This is currently gcc 9.1+, gcc 8.3 and (once released) gcc 7.5 [2]. It expands to just "asm" for other compilers. Using asm inline("foo") instead of asm("foo") overrules gcc's heuristic estimate of the size of the code represented by the asm() statement, and makes gcc use the minimum possible size instead. That can in turn affect gcc's inlining decisions. I wasn't sure whether to make this a function-like macro or not - this way, it can be combined with volatile as asm_inline volatile() but perhaps we'd prefer to spell that asm_inline_volatile() anyway. The Kconfig logic is taken from an RFC patch by Masahiro Yamada [3]. [1] Technically, asm __inline, since both inline and __inline__ are macros that attach various attributes, making gcc barf if one literally does "asm inline()". However, the third spelling __inline is available for referring to the bare keyword. [2] https://lore.kernel.org/lkml/20190907001411.GG9749@gate.crashing.org/ [3] https://lore.kernel.org/lkml/1544695154-15250-1-git-send-email-yamada.masahiro@socionext.com/ Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-09-11module: move CONFIG_UNUSED_SYMBOLS to the sub-menu of MODULESMasahiro Yamada1-0/+16
When CONFIG_MODULES is disabled, CONFIG_UNUSED_SYMBOLS is pointless, thus it should be invisible. Instead of adding "depends on MODULES", I moved it to the sub-menu "Enable loadable module support", which is a better fit. I put it close to TRIM_UNUSED_KSYMS because it depends on !UNUSED_SYMBOLS. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-09-11module: remove redundant 'depends on MODULES'Masahiro Yamada1-3/+1
These are located in the 'if MODULES' ... 'endif' block. Remove the redundant dependencies. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-09-10module: add config option MODULE_ALLOW_MISSING_NAMESPACE_IMPORTSMatthias Maennich1-0/+13
If MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is enabled (default=n), the requirement for modules to import all namespaces that are used by the module is relaxed. Enabling this option effectively allows (invalid) modules to be loaded while only a warning is emitted. Disabling this option keeps the enforcement at module loading time and loading is denied if the module's imports are not satisfactory. Reviewed-by: Martijn Coenen <maco@android.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-09-04kbuild,arc: add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 for ARCMasahiro Yamada1-2/+10
arch/arc/Makefile overrides -O2 with -O3. This is the only user of ARCH_CFLAGS. There is no user of ARCH_CPPFLAGS or ARCH_AFLAGS. My plan is to remove ARCH_{CPP,A,C}FLAGS after refactoring the ARC Makefile. Currently, ARC has no way to enable -Wmaybe-uninitialized because both -O3 and -Os disable it. Enabling it will be useful for compile-testing. This commit allows allmodconfig (, which defaults to -O2) to enable it. Add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y to all the defconfig files in arch/arc/configs/ in order to keep the current config settings. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Vineet Gupta <vgupta@synopsys.com>
2019-09-03sched/uclamp: Extend CPU's cgroup controllerPatrick Bellasi1-0/+22
The cgroup CPU bandwidth controller allows to assign a specified (maximum) bandwidth to the tasks of a group. However this bandwidth is defined and enforced only on a temporal base, without considering the actual frequency a CPU is running on. Thus, the amount of computation completed by a task within an allocated bandwidth can be very different depending on the actual frequency the CPU is running that task. The amount of computation can be affected also by the specific CPU a task is running on, especially when running on asymmetric capacity systems like Arm's big.LITTLE. With the availability of schedutil, the scheduler is now able to drive frequency selections based on actual task utilization. Moreover, the utilization clamping support provides a mechanism to bias the frequency selection operated by schedutil depending on constraints assigned to the tasks currently RUNNABLE on a CPU. Giving the mechanisms described above, it is now possible to extend the cpu controller to specify the minimum (or maximum) utilization which should be considered for tasks RUNNABLE on a cpu. This makes it possible to better defined the actual computational power assigned to task groups, thus improving the cgroup CPU bandwidth controller which is currently based just on time constraints. Extend the CPU controller with a couple of new attributes uclamp.{min,max} which allow to enforce utilization boosting and capping for all the tasks in a group. Specifically: - uclamp.min: defines the minimum utilization which should be considered i.e. the RUNNABLE tasks of this group will run at least at a minimum frequency which corresponds to the uclamp.min utilization - uclamp.max: defines the maximum utilization which should be considered i.e. the RUNNABLE tasks of this group will run up to a maximum frequency which corresponds to the uclamp.max utilization These attributes: a) are available only for non-root nodes, both on default and legacy hierarchies, while system wide clamps are defined by a generic interface which does not depends on cgroups. This system wide interface enforces constraints on tasks in the root node. b) enforce effective constraints at each level of the hierarchy which are a restriction of the group requests considering its parent's effective constraints. Root group effective constraints are defined by the system wide interface. This mechanism allows each (non-root) level of the hierarchy to: - request whatever clamp values it would like to get - effectively get only up to the maximum amount allowed by its parent c) have higher priority than task-specific clamps, defined via sched_setattr(), thus allowing to control and restrict task requests. Add two new attributes to the cpu controller to collect "requested" clamp values. Allow that at each non-root level of the hierarchy. Keep it simple by not caring now about "effective" values computation and propagation along the hierarchy. Update sysctl_sched_uclamp_handler() to use the newly introduced uclamp_mutex so that we serialize system default updates with cgroup relate updates. Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Michal Koutny <mkoutny@suse.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Alessio Balsini <balsini@android.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Perret <quentin.perret@arm.com> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Steve Muckle <smuckle@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Todd Kjos <tkjos@google.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lkml.kernel.org/r/20190822132811.31294-2-patrick.bellasi@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-08-29init/Kconfig: rework help of CONFIG_CC_OPTIMIZE_FOR_SIZEMasahiro Yamada1-4/+2
CONFIG_CC_OPTIMIZE_FOR_SIZE was originally an independent boolean option, but commit 877417e6ffb9 ("Kbuild: change CC_OPTIMIZE_FOR_SIZE definition") turned it into a choice between _PERFORMANCE and _SIZE. The phrase "If unsure, say N." sounds like an independent option. Reword the help text to make it appropriate for the choice menu. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-22kbuild: add CONFIG_ASM_MODVERSIONSMasahiro Yamada1-0/+8
Add CONFIG_ASM_MODVERSIONS. This allows to remove one if-conditional nesting in scripts/Makefile.build. scripts/Makefile.build is run every time Kbuild descends into a sub-directory. So, I want to avoid $(wildcard ...) evaluation where possible although computing $(wildcard ...) is so cheap that it may not make measurable performance difference. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-08-20Revert "init/Kconfig: Fix infinite Kconfig recursion on PPC"Will Deacon1-1/+1
This reverts commit 71c67a31f09fa8fdd1495dffd96a5f0d4cef2ede. Commit 117acf5c29dd ("powerpc/Makefile: Always pass --synthetic to nm if supported") removed the only conditional definition of $(NM), so we can revert our temporary bodge to avoid Kconfig recursion and go back to passing $(NM) through to the 'tools-support-relr.sh' when detecting support for RELR relocations. Signed-off-by: Will Deacon <will@kernel.org>
2019-08-19lockdown: Enforce module signatures if the kernel is locked downDavid Howells1-0/+5
If the kernel is locked down, require that all modules have valid signatures that we can verify. I have adjusted the errors generated: (1) If there's no signature (ENODATA) or we can't check it (ENOPKG, ENOKEY), then: (a) If signatures are enforced then EKEYREJECTED is returned. (b) If there's no signature or we can't check it, but the kernel is locked down then EPERM is returned (this is then consistent with other lockdown cases). (2) If the signature is unparseable (EBADMSG, EINVAL), the signature fails the check (EKEYREJECTED) or a system error occurs (eg. ENOMEM), we return the error we got. Note that the X.509 code doesn't check for key expiry as the RTC might not be valid or might not have been transferred to the kernel's clock yet. [Modified by Matthew Garrett to remove the IMA integration. This will be replaced with integration with the IMA architecture policy patchset.] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Matthew Garrett <matthewgarrett@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Jessica Yu <jeyu@kernel.org> Signed-off-by: James Morris <jmorris@namei.org>
2019-08-07init/Kconfig: Fix infinite Kconfig recursion on PPCWill Deacon1-1/+1
Commit 5cf896fb6be3 ("arm64: Add support for relocating the kernel with RELR relocations") introduced CONFIG_TOOLS_SUPPORT_RELR, which checks for RELR support in the toolchain as part of the kernel configuration. During this procedure, "$(NM)" is invoked to see if it supports the new relocation format, however PowerPC conditionally overrides this variable in the architecture Makefile in order to pass '--synthetic' when targetting PPC64. This conditional override causes Kconfig to recurse forever, since CONFIG_TOOLS_SUPPORT_RELR cannot be determined without $(NM) being defined, but that in turn depends on CONFIG_PPC64: $ make ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- scripts/kconfig/conf --syncconfig Kconfig scripts/kconfig/conf --syncconfig Kconfig scripts/kconfig/conf --syncconfig Kconfig [...] In this particular case, it looks like PowerPC may be able to pass '--synthetic' unconditionally to nm or even drop it altogether. While that is being resolved, let's just bodge the RELR check by picking up $(NM) directly from the environment in whatever state it happens to be in. Cc: Peter Collingbourne <pcc@google.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-08-05MODSIGN: Export module signature definitionsThiago Jung Bauermann1-1/+5
IMA will use the module_signature format for append signatures, so export the relevant definitions and factor out the code which verifies that the appended signature trailer is valid. Also, create a CONFIG_MODULE_SIG_FORMAT option so that IMA can select it and be able to use mod_check_sig() without having to depend on either CONFIG_MODULE_SIG or CONFIG_MODULES. s390 duplicated the definition of struct module_signature so now they can use the new <linux/module_signature.h> header instead. Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Acked-by: Jessica Yu <jeyu@kernel.org> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2019-08-05arm64: Add support for relocating the kernel with RELR relocationsPeter Collingbourne1-0/+3
RELR is a relocation packing format for relative relocations. The format is described in a generic-abi proposal: https://groups.google.com/d/topic/generic-abi/bX460iggiKg/discussion The LLD linker can be instructed to pack relocations in the RELR format by passing the flag --pack-dyn-relocs=relr. This patch adds a new config option, CONFIG_RELR. Enabling this option instructs the linker to pack vmlinux's relative relocations in the RELR format, and causes the kernel to apply the relocations at startup along with the RELA relocations. RELA relocations still need to be applied because the linker will emit RELA relative relocations if they are unrepresentable in the RELR format (i.e. address not a multiple of 2). Enabling CONFIG_RELR reduces the size of a defconfig kernel image with CONFIG_RANDOMIZE_BASE by 3.5MB/16% uncompressed, or 550KB/5% compressed (lz4). Signed-off-by: Peter Collingbourne <pcc@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-07-17Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-2/+2
Merge more updates from Andrew Morton: "VM: - z3fold fixes and enhancements by Henry Burns and Vitaly Wool - more accurate reclaimed slab caches calculations by Yafang Shao - fix MAP_UNINITIALIZED UAPI symbol to not depend on config, by Christoph Hellwig - !CONFIG_MMU fixes by Christoph Hellwig - new novmcoredd parameter to omit device dumps from vmcore, by Kairui Song - new test_meminit module for testing heap and pagealloc initialization, by Alexander Potapenko - ioremap improvements for huge mappings, by Anshuman Khandual - generalize kprobe page fault handling, by Anshuman Khandual - device-dax hotplug fixes and improvements, by Pavel Tatashin - enable synchronous DAX fault on powerpc, by Aneesh Kumar K.V - add pte_devmap() support for arm64, by Robin Murphy - unify locked_vm accounting with a helper, by Daniel Jordan - several misc fixes core/lib: - new typeof_member() macro including some users, by Alexey Dobriyan - make BIT() and GENMASK() available in asm, by Masahiro Yamada - changed LIST_POISON2 on x86_64 to 0xdead000000000122 for better code generation, by Alexey Dobriyan - rbtree code size optimizations, by Michel Lespinasse - convert struct pid count to refcount_t, by Joel Fernandes get_maintainer.pl: - add --no-moderated switch to skip moderated ML's, by Joe Perches misc: - ptrace PTRACE_GET_SYSCALL_INFO interface - coda updates - gdb scripts, various" [ Using merge message suggestion from Vlastimil Babka, with some editing - Linus ] * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (100 commits) fs/select.c: use struct_size() in kmalloc() mm: add account_locked_vm utility function arm64: mm: implement pte_devmap support mm: introduce ARCH_HAS_PTE_DEVMAP mm: clean up is_device_*_page() definitions mm/mmap: move common defines to mman-common.h mm: move MAP_SYNC to asm-generic/mman-common.h device-dax: "Hotremove" persistent memory that is used like normal RAM mm/hotplug: make remove_memory() interface usable device-dax: fix memory and resource leak if hotplug fails include/linux/lz4.h: fix spelling and copy-paste errors in documentation ipc/mqueue.c: only perform resource calculation if user valid include/asm-generic/bug.h: fix "cut here" for WARN_ON for __WARN_TAINT architectures scripts/gdb: add helpers to find and list devices scripts/gdb: add lx-genpd-summary command drivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctl kernel/pid.c: convert struct pid count to refcount_t drivers/rapidio/devices/rio_mport_cdev.c: NUL terminate some strings select: shift restore_saved_sigmask_unless() into poll_select_copy_remaining() select: change do_poll() to return -ERESTARTNOHAND rather than -EINTR ...
2019-07-16init/Kconfig: fix neighboring typosKees Cook1-2/+2
This fixes a couple typos I noticed in the slab Kconfig: sacrifies -> sacrifices accellerate -> accelerate Seeing as no other instances of these typos are found elsewhere in the kernel and that I originally added one of the two, I can only assume working on slab must have caused damage to the spelling centers of my brain. Link: http://lkml.kernel.org/r/201905292203.CD000546EB@keescook Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>