| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Along the development cycle, the testing code support for module/in-kernel
compiles was removed. Restore this functionality by moving any internal
API tests to the userspace side, as well as threading tests. Fix the
lockdep issues and add a way to reduce memory usage so the tests can
complete with KASAN + memleak detection. Make the tests work on 32 bit
hosts where possible and detect 32 bit hosts in the radix test suite.
[akpm@linux-foundation.org: fix module export]
[akpm@linux-foundation.org: fix it some more]
[liam.howlett@oracle.com: fix compile warnings on 32bit build in check_find()]
Link: https://lkml.kernel.org/r/20221107203816.1260327-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20221028180415.3074673-1-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull MM updates from Andrew Morton:
- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any
negative reports (or any positive ones, come to that).
- Also the Maple Tree from Liam Howlett. An overlapping range-based
tree for vmas. It it apparently slightly more efficient in its own
right, but is mainly targeted at enabling work to reduce mmap_lock
contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
at [1]. This has yet to be addressed due to Liam's unfortunately
timed vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down
to the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
support file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging
activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]
* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
hugetlb: allocate vma lock for all sharable vmas
hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
hugetlb: fix vma lock handling during split vma and range unmapping
mglru: mm/vmscan.c: fix imprecise comments
mm/mglru: don't sync disk for each aging cycle
mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
mm: memcontrol: use do_memsw_account() in a few more places
mm: memcontrol: deprecate swapaccounting=0 mode
mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
mm/secretmem: remove reduntant return value
mm/hugetlb: add available_huge_pages() func
mm: remove unused inline functions from include/linux/mm_inline.h
selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
selftests/vm: add thp collapse shmem testing
selftests/vm: add thp collapse file and tmpfs testing
selftests/vm: modularize thp collapse memory operations
selftests/vm: dedup THP helpers
mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
mm/madvise: add file and shmem support to MADV_COLLAPSE
...
|
|
Pull crypto updates from Herbert Xu:
"API:
- Feed untrusted RNGs into /dev/random
- Allow HWRNG sleeping to be more interruptible
- Create lib/utils module
- Setting private keys no longer required for akcipher
- Remove tcrypt mode=1000
- Reorganised Kconfig entries
Algorithms:
- Load x86/sha512 based on CPU features
- Add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
Drivers:
- Add HACE crypto driver aspeed"
* tag 'v6.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits)
crypto: aspeed - Remove redundant dev_err call
crypto: scatterwalk - Remove unused inline function scatterwalk_aligned()
crypto: aead - Remove unused inline functions from aead
crypto: bcm - Simplify obtain the name for cipher
crypto: marvell/octeontx - use sysfs_emit() to instead of scnprintf()
hwrng: core - start hwrng kthread also for untrusted sources
crypto: zip - remove the unneeded result variable
crypto: qat - add limit to linked list parsing
crypto: octeontx2 - Remove the unneeded result variable
crypto: ccp - Remove the unneeded result variable
crypto: aspeed - Fix check for platform_get_irq() errors
crypto: virtio - fix memory-leak
crypto: cavium - prevent integer overflow loading firmware
crypto: marvell/octeontx - prevent integer overflows
crypto: aspeed - fix build error when only CRYPTO_DEV_ASPEED is enabled
crypto: hisilicon/qm - fix the qos value initialization
crypto: sun4i-ss - use DEFINE_SHOW_ATTRIBUTE to simplify sun4i_ss_debugfs
crypto: tcrypt - add async speed test for aria cipher
crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
crypto: aria - prepare generic module for optimized implementations
...
|
|
Pull driver core updates from Greg KH:
"Here is the big set of driver core and debug printk changes for
6.1-rc1. Included in here is:
- dynamic debug updates for the core and the drm subsystem. The drm
changes have all been acked by the relevant maintainers
- kernfs fixes for syzbot reported problems
- kernfs refactors and updates for cgroup requirements
- magic number cleanups and removals from the kernel tree (they were
not being used and they really did not actually do anything)
- other tiny cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (74 commits)
docs: filesystems: sysfs: Make text and code for ->show() consistent
Documentation: NBD_REQUEST_MAGIC isn't a magic number
a.out: restore CMAGIC
device property: Add const qualifier to device_get_match_data() parameter
drm_print: add _ddebug descriptor to drm_*dbg prototypes
drm_print: prefer bare printk KERN_DEBUG on generic fn
drm_print: optimize drm_debug_enabled for jump-label
drm-print: add drm_dbg_driver to improve namespace symmetry
drm-print.h: include dyndbg header
drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro
drm_print: interpose drm_*dbg with forwarding macros
drm: POC drm on dyndbg - use in core, 2 helpers, 3 drivers.
drm_print: condense enum drm_debug_category
debugfs: use DEFINE_SHOW_ATTRIBUTE to define debugfs_regset32_fops
driver core: use IS_ERR_OR_NULL() helper in device_create_groups_vargs()
Documentation: ENI155_MAGIC isn't a magic number
Documentation: NBD_REPLY_MAGIC isn't a magic number
nbd: remove define-only NBD_MAGIC, previously magic number
Documentation: FW_HEADER_MAGIC isn't a magic number
Documentation: EEPROM_MAGIC_VALUE isn't a magic number
...
|
|
Pull kernel hardening updates from Kees Cook:
"Most of the collected changes here are fixes across the tree for
various hardening features (details noted below).
The most notable new feature here is the addition of the memcpy()
overflow warning (under CONFIG_FORTIFY_SOURCE), which is the next step
on the path to killing the common class of "trivially detectable"
buffer overflow conditions (i.e. on arrays with sizes known at compile
time) that have resulted in many exploitable vulnerabilities over the
years (e.g. BleedingTooth).
This feature is expected to still have some undiscovered false
positives. It's been in -next for a full development cycle and all the
reported false positives have been fixed in their respective trees.
All the known-bad code patterns we could find with Coccinelle are also
either fixed in their respective trees or in flight.
The commit message in commit 54d9469bc515 ("fortify: Add run-time WARN
for cross-field memcpy()") for the feature has extensive details, but
I'll repeat here that this is a warning _only_, and is not intended to
actually block overflows (yet). The many patches fixing array sizes
and struct members have been landing for several years now, and we're
finally able to turn this on to find any remaining stragglers.
Summary:
Various fixes across several hardening areas:
- loadpin: Fix verity target enforcement (Matthias Kaehlcke).
- zero-call-used-regs: Add missing clobbers in paravirt (Bill
Wendling).
- CFI: clean up sparc function pointer type mismatches (Bart Van
Assche).
- Clang: Adjust compiler flag detection for various Clang changes
(Sami Tolvanen, Kees Cook).
- fortify: Fix warnings in arch-specific code in sh, ARM, and xen.
Improvements to existing features:
- testing: improve overflow KUnit test, introduce fortify KUnit test,
add more coverage to LKDTM tests (Bart Van Assche, Kees Cook).
- overflow: Relax overflow type checking for wider utility.
New features:
- string: Introduce strtomem() and strtomem_pad() to fill a gap in
strncpy() replacement needs.
- um: Enable FORTIFY_SOURCE support.
- fortify: Enable run-time struct member memcpy() overflow warning"
* tag 'hardening-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (27 commits)
Makefile.extrawarn: Move -Wcast-function-type-strict to W=1
hardening: Remove Clang's enable flag for -ftrivial-auto-var-init=zero
sparc: Unbreak the build
x86/paravirt: add extra clobbers with ZERO_CALL_USED_REGS enabled
x86/paravirt: clean up typos and grammaros
fortify: Convert to struct vs member helpers
fortify: Explicitly check bounds are compile-time constants
x86/entry: Work around Clang __bdos() bug
ARM: decompressor: Include .data.rel.ro.local
fortify: Adjust KUnit test for modular build
sh: machvec: Use char[] for section boundaries
kunit/memcpy: Avoid pathological compile-time string size
lib: Improve the is_signed_type() kunit test
LoadPin: Require file with verity root digests to have a header
dm: verity-loadpin: Only trust verity targets with enforcement
LoadPin: Fix Kconfig doc about format of file with verity digests
um: Enable FORTIFY_SOURCE
lkdtm: Update tests for memcpy() run-time warnings
fortify: Add run-time WARN for cross-field memcpy()
fortify: Use SIZE_MAX instead of (size_t)-1
...
|
|
EFI stub cannot be linked with KMSAN runtime, so we disable
instrumentation for it.
Instrumenting kcov, stackdepot or lockdep leads to infinite recursion
caused by instrumentation hooks calling instrumented code again.
Link: https://lkml.kernel.org/r/20220915150417.722975-13-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move KASAN tests to mm/kasan/ to keep the test code alongside the
implementation.
Link: https://lkml.kernel.org/r/676398f0aeecd47d2f8e3369ea0e95563f641a36.1662416260.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Introducing the Maple Tree"
The maple tree is an RCU-safe range based B-tree designed to use modern
processor cache efficiently. There are a number of places in the kernel
that a non-overlapping range-based tree would be beneficial, especially
one with a simple interface. If you use an rbtree with other data
structures to improve performance or an interval tree to track
non-overlapping ranges, then this is for you.
The tree has a branching factor of 10 for non-leaf nodes and 16 for leaf
nodes. With the increased branching factor, it is significantly shorter
than the rbtree so it has fewer cache misses. The removal of the linked
list between subsequent entries also reduces the cache misses and the need
to pull in the previous and next VMA during many tree alterations.
The first user that is covered in this patch set is the vm_area_struct,
where three data structures are replaced by the maple tree: the augmented
rbtree, the vma cache, and the linked list of VMAs in the mm_struct. The
long term goal is to reduce or remove the mmap_lock contention.
The plan is to get to the point where we use the maple tree in RCU mode.
Readers will not block for writers. A single write operation will be
allowed at a time. A reader re-walks if stale data is encountered. VMAs
would be RCU enabled and this mode would be entered once multiple tasks
are using the mm_struct.
Davidlor said
: Yes I like the maple tree, and at this stage I don't think we can ask for
: more from this series wrt the MM - albeit there seems to still be some
: folks reporting breakage. Fundamentally I see Liam's work to (re)move
: complexity out of the MM (not to say that the actual maple tree is not
: complex) by consolidating the three complimentary data structures very
: much worth it considering performance does not take a hit. This was very
: much a turn off with the range locking approach, which worst case scenario
: incurred in prohibitive overhead. Also as Liam and Matthew have
: mentioned, RCU opens up a lot of nice performance opportunities, and in
: addition academia[1] has shown outstanding scalability of address spaces
: with the foundation of replacing the locked rbtree with RCU aware trees.
A similar work has been discovered in the academic press
https://pdos.csail.mit.edu/papers/rcuvm:asplos12.pdf
Sheer coincidence. We designed our tree with the intention of solving the
hardest problem first. Upon settling on a b-tree variant and a rough
outline, we researched ranged based b-trees and RCU b-trees and did find
that article. So it was nice to find reassurances that we were on the
right path, but our design choice of using ranges made that paper unusable
for us.
This patch (of 70):
The maple tree is an RCU-safe range based B-tree designed to use modern
processor cache efficiently. There are a number of places in the kernel
that a non-overlapping range-based tree would be beneficial, especially
one with a simple interface. If you use an rbtree with other data
structures to improve performance or an interval tree to track
non-overlapping ranges, then this is for you.
The tree has a branching factor of 10 for non-leaf nodes and 16 for leaf
nodes. With the increased branching factor, it is significantly shorter
than the rbtree so it has fewer cache misses. The removal of the linked
list between subsequent entries also reduces the cache misses and the need
to pull in the previous and next VMA during many tree alterations.
The first user that is covered in this patch set is the vm_area_struct,
where three data structures are replaced by the maple tree: the augmented
rbtree, the vma cache, and the linked list of VMAs in the mm_struct. The
long term goal is to reduce or remove the mmap_lock contention.
The plan is to get to the point where we use the maple tree in RCU mode.
Readers will not block for writers. A single write operation will be
allowed at a time. A reader re-walks if stale data is encountered. VMAs
would be RCU enabled and this mode would be entered once multiple tasks
are using the mm_struct.
There is additional BUG_ON() calls added within the tree, most of which
are in debug code. These will be replaced with a WARN_ON() call in the
future. There is also additional BUG_ON() calls within the code which
will also be reduced in number at a later date. These exist to catch
things such as out-of-range accesses which would crash anyways.
Link: https://lkml.kernel.org/r/20220906194824.2110408-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20220906194824.2110408-2-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: David Howells <dhowells@redhat.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We need the driver core and debugfs changes in this branch.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add lib/fortify_kunit.c KUnit test for checking the expected behavioral
characteristics of FORTIFY_SOURCE internals.
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Steven Rostedt (Google)" <rostedt@goodmis.org>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Sander Vanheule <sander@svanheule.net>
Cc: linux-hardening@vger.kernel.org
Cc: llvm@lists.linux.dev
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Provide a simple module to allow testing DYNAMIC_DEBUG behavior. It
calls do_prints() from module-init, and with a sysfs-node.
dmesg -C
dmesg -w &
modprobe test_dynamic_debug dyndbg=+p
echo 1 > /sys/module/dynamic_debug/parameters/verbose
cat /sys/module/test_dynamic_debug/parameters/do_prints
echo module test_dynamic_debug +mftl > /proc/dynamic_debug/control
echo junk > /sys/module/test_dynamic_debug/parameters/do_prints
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-9-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Although not documented, is_signed_type() must support the 'bool' and
pointer types next to scalar and enumeration types. Add a selftest that
verifies that this macro handles all supported types correctly.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Isabella Basso <isabbasso@riseup.net>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sander Vanheule <sander@svanheule.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Isabella Basso <isabbasso@riseup.net>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220826162116.1050972-2-bvanassche@acm.org
|
|
The cpumask test suite doesn't follow the KUnit style guidelines, as
laid out in Documentation/dev-tools/kunit/style.rst. The file is
renamed to lib/cpumask_kunit.c to clearly distinguish it from other,
non-KUnit, tests.
Link: https://lore.kernel.org/lkml/346cb279-8e75-24b0-7d12-9803f2b41c73@riseup.net/
Suggested-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
As requested at
https://lore.kernel.org/r/YtEgzHuuMts0YBCz@gondor.apana.org.au, move
__crypto_memneq into lib/crypto/ and put it under a new tristate. The
tristate is CRYPTO_LIB_UTILS, and it builds a module libcryptoutils. As
more crypto library utilities are being added, this creates a single
place for them to go without cluttering up the main lib directory.
The module's main file will be lib/crypto/utils.c. However, leave
memneq.c as its own file because of its nonstandard license.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In the uniprocessor case, cpumask_next_wrap() can be simplified, as the
number of valid argument combinations is limited:
- 'start' can only be 0
- 'n' can only be -1 or 0
The only valid CPU that can then be returned, if any, will be the first
one set in the provided 'mask'.
For NR_CPUS == 1, include/linux/cpumask.h now provides an inline
definition of cpumask_next_wrap(), which will conflict with the one
provided by lib/cpumask.c. Make building of lib/cpumask.o again depend
on CONFIG_SMP=y (i.e. NR_CPUS > 1) to avoid the re-definition.
Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
Pull bitmap updates from Yury Norov:
- fix the duplicated comments on bitmap_to_arr64() (Qu Wenruo)
- optimize out non-atomic bitops on compile-time constants (Alexander
Lobakin)
- cleanup bitmap-related headers (Yury Norov)
- x86/olpc: fix 'logical not is only applied to the left hand side'
(Alexander Lobakin)
- lib/nodemask: inline wrappers around bitmap (Yury Norov)
* tag 'bitmap-6.0-rc1' of https://github.com/norov/linux: (26 commits)
lib/nodemask: inline next_node_in() and node_random()
powerpc: drop dependency on <asm/machdep.h> in archrandom.h
x86/olpc: fix 'logical not is only applied to the left hand side'
lib/cpumask: move some one-line wrappers to header file
headers/deps: mm: align MANITAINERS and Docs with new gfp.h structure
headers/deps: mm: Split <linux/gfp_types.h> out of <linux/gfp.h>
headers/deps: mm: Optimize <linux/gfp.h> header dependencies
lib/cpumask: move trivial wrappers around find_bit to the header
lib/cpumask: change return types to unsigned where appropriate
cpumask: change return types to bool where appropriate
lib/bitmap: change type of bitmap_weight to unsigned long
lib/bitmap: change return types to bool where appropriate
arm: align find_bit declarations with generic kernel
iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE)
lib/test_bitmap: test the tail after bitmap_to_arr64()
lib/bitmap: fix off-by-one in bitmap_to_arr64()
lib: test_bitmap: add compile-time optimization/evaluations assertions
bitmap: don't assume compiler evaluates small mem*() builtins calls
net/ice: fix initializing the bitmap in the switch code
bitops: let optimize out non-atomic bitops on compile-time constants
...
|
|
Pull misc updates from Andrew Morton:
"Updates to various subsystems which I help look after. lib, ocfs2,
fatfs, autofs, squashfs, procfs, etc. A relatively small amount of
material this time"
* tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
scripts/gdb: ensure the absolute path is generated on initial source
MAINTAINERS: kunit: add David Gow as a maintainer of KUnit
mailmap: add linux.dev alias for Brendan Higgins
mailmap: update Kirill's email
profile: setup_profiling_timer() is moslty not implemented
ocfs2: fix a typo in a comment
ocfs2: use the bitmap API to simplify code
ocfs2: remove some useless functions
lib/mpi: fix typo 'the the' in comment
proc: add some (hopefully) insightful comments
bdi: remove enum wb_congested_state
kernel/hung_task: fix address space of proc_dohung_task_timeout_secs
lib/lzo/lzo1x_compress.c: replace ternary operator with min() and min_t()
squashfs: support reading fragments in readahead call
squashfs: implement readahead
squashfs: always build "file direct" version of page actor
Revert "squashfs: provide backing_dev_info in order to disable read-ahead"
fs/ocfs2: Fix spelling typo in comment
ia64: old_rr4 added under CONFIG_HUGETLB_PAGE
proc: fix test for "vsyscall=xonly" boot option
...
|
|
Pull asm-generic updates from Arnd Bergmann:
"There are three independent sets of changes:
- Sai Prakash Ranjan adds tracing support to the asm-generic version
of the MMIO accessors, which is intended to help understand
problems with device drivers and has been part of Qualcomm's vendor
kernels for many years
- A patch from Sebastian Siewior to rework the handling of IRQ stacks
in softirqs across architectures, which is needed for enabling
PREEMPT_RT
- The last patch to remove the CONFIG_VIRT_TO_BUS option and some of
the code behind that, after the last users of this old interface
made it in through the netdev, scsi, media and staging trees"
* tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
uapi: asm-generic: fcntl: Fix typo 'the the' in comment
arch/*/: remove CONFIG_VIRT_TO_BUS
soc: qcom: geni: Disable MMIO tracing for GENI SE
serial: qcom_geni_serial: Disable MMIO tracing for geni serial
asm-generic/io: Add logging support for MMIO accessors
KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM
lib: Add register read/write tracing support
drm/meson: Fix overflow implicit truncation warnings
irqchip/tegra: Fix overflow implicit truncation warnings
coresight: etm4x: Use asm-generic IO memory barriers
arm64: io: Use asm-generic high level MMIO accessors
arch/*: Disable softirq stacks on PREEMPT_RT.
|
|
Pull block driver updates from Jens Axboe:
- NVMe pull requests via Christoph:
- add support for In-Band authentication (Hannes Reinecke)
- handle the persistent internal error AER (Michael Kelley)
- use in-capsule data for TCP I/O queue connect (Caleb Sander)
- remove timeout for getting RDMA-CM established event (Israel
Rukshin)
- misc cleanups (Joel Granados, Sagi Grimberg, Chaitanya Kulkarni,
Guixin Liu, Xiang wangx)
- use command_id instead of req->tag in trace_nvme_complete_rq()
(Bean Huo)
- various fixes for the new authentication code (Lukas Bulwahn,
Dan Carpenter, Colin Ian King, Chaitanya Kulkarni, Hannes
Reinecke)
- small cleanups (Liu Song, Christoph Hellwig)
- restore compat_ioctl support (Nick Bowler)
- make a nvmet-tcp workqueue lockdep-safe (Sagi Grimberg)
- enable generic interface (/dev/ngXnY) for unknown command sets
(Joel Granados, Christoph Hellwig)
- don't always build constants.o (Christoph Hellwig)
- print the command name of aborted commands (Christoph Hellwig)
- MD pull requests via Song:
- Improve raid5 lock contention, by Logan Gunthorpe.
- Misc fixes to raid5, by Logan Gunthorpe.
- Fix race condition with md_reap_sync_thread(), by Guoqing Jiang.
- Fix potential deadlock with raid5_quiesce and
raid5_get_active_stripe, by Logan Gunthorpe.
- Refactoring md_alloc(), by Christoph"
- Fix md disk_name lifetime problems, by Christoph Hellwig
- Convert prepare_to_wait() to wait_woken() api, by Logan
Gunthorpe;
- Fix sectors_to_do bitmap issue, by Logan Gunthorpe.
- Work on unifying the null_blk module parameters and configfs API
(Vincent)
- drbd bitmap IO error fix (Lars)
- Set of rnbd fixes (Guoqing, Md Haris)
- Remove experimental marker on bcache async device registration (Coly)
- Series from cleaning up the bio splitting (Christoph)
- Removal of the sx8 block driver. This hardware never really
widespread, and it didn't receive a lot of attention after the
initial merge of it back in 2005 (Christoph)
- A few fixes for s390 dasd (Eric, Jiang)
- Followup set of fixes for ublk (Ming)
- Support for UBLK_IO_NEED_GET_DATA for ublk (ZiyangZhang)
- Fixes for the dio dma alignment (Keith)
- Misc fixes and cleanups (Ming, Yu, Dan, Christophe
* tag 'for-5.20/block-2022-08-04' of git://git.kernel.dk/linux-block: (136 commits)
s390/dasd: Establish DMA alignment
s390/dasd: drop unexpected word 'for' in comments
ublk_drv: add support for UBLK_IO_NEED_GET_DATA
ublk_cmd.h: add one new ublk command: UBLK_IO_NEED_GET_DATA
ublk_drv: cleanup ublksrv_ctrl_dev_info
ublk_drv: add SET_PARAMS/GET_PARAMS control command
ublk_drv: fix ublk device leak in case that add_disk fails
ublk_drv: cancel device even though disk isn't up
block: fix leaking page ref on truncated direct io
block: ensure bio_iov_add_page can't fail
block: ensure iov_iter advances for added pages
drivers:md:fix a potential use-after-free bug
md/raid5: Ensure batch_last is released before sleeping for quiesce
md/raid5: Move stripe_request_ctx up
md/raid5: Drop unnecessary call to r5c_check_stripe_cache_usage()
md/raid5: Make is_inactive_blocked() helper
md/raid5: Refactor raid5_get_active_stripe()
block: pass struct queue_limits to the bio splitting helpers
block: move bio_allowed_max_sectors to blk-merge.c
block: move the call to get_max_io_size out of blk_bio_segment_split
...
|
|
Add RFC4648-compliant base64 encoding and decoding routines, based on
the base64url encoding in fs/crypto/fname.c.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Cc: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The functions are pretty thin wrappers around find_bit engine, and
keeping them in c-file prevents compiler from small_const_nbits()
optimization, which must take place for all systems with MAX_NUMNODES
less than BITS_PER_LONG (default is 16 for me).
Moving them to header file doesn't blow up the kernel size:
add/remove: 1/2 grow/shrink: 9/5 up/down: 968/-88 (880)
CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Michael Ellerman <mpe@ellerman.id.au>
CC: Paul Mackerras <paulus@samba.org>
CC: Rasmus Villemoes <linux@rasmusvillemoes.dk>
CC: Stephen Rothwell <sfr@canb.auug.org.au>
CC: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
Add a basic suite of tests for cpumask, providing some tests for empty and
completely filled cpumasks.
Link: https://lkml.kernel.org/r/c96980ec35c3bd23f17c3374bf42c22971545e85.1656777646.git.sander@svanheule.net
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Yury Norov <yury.norov@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On uniprocessor builds, any CPU mask is assumed to contain exactly one CPU
(cpu0). This assumption ignores the existence of empty masks, resulting
in incorrect behaviour.
cpumask_first_zero(), cpumask_next_zero(), and for_each_cpu_not() don't
provide behaviour matching the assumption that a UP mask is always "1",
and instead provide behaviour matching the empty mask.
Drop the incorrectly optimised code and use the generic implementations in
all cases.
Link: https://lkml.kernel.org/r/86bf3f005abba2d92120ddd0809235cab4f759a6.1656777646.git.sander@svanheule.net
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Suggested-by: Yury Norov <yury.norov@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
SHA-1 is a crypto algorithm (or at least was intended to be -- it's not
considered secure anymore), so move it out of the top-level library
directory and into lib/crypto/.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Generic MMIO read/write i.e., __raw_{read,write}{b,l,w,q} accessors
are typically used to read/write from/to memory mapped registers
and can cause hangs or some undefined behaviour in following few
cases,
* If the access to the register space is unclocked, for example: if
there is an access to multimedia(MM) block registers without MM
clocks.
* If the register space is protected and not set to be accessible from
non-secure world, for example: only EL3 (EL: Exception level) access
is allowed and any EL2/EL1 access is forbidden.
* If xPU(memory/register protection units) is controlling access to
certain memory/register space for specific clients.
and more...
Such cases usually results in instant reboot/SErrors/NOC or interconnect
hangs and tracing these register accesses can be very helpful to debug
such issues during initial development stages and also in later stages.
So use ftrace trace events to log such MMIO register accesses which
provides rich feature set such as early enablement of trace events,
filtering capability, dumping ftrace logs on console and many more.
Sample output:
rwmmio_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700
rwmmio_post_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700
rwmmio_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 addr=0xfffffbfffdbff610
rwmmio_post_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 val=0x0 addr=0xfffffbfffdbff610
Co-developed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This is used by code that doesn't need CONFIG_CRYPTO, so move this into
lib/ with a Kconfig option so that it can be selected by whatever needs
it.
This fixes a linker error Zheng pointed out when
CRYPTO_MANAGER_DISABLE_TESTS!=y and CRYPTO=m:
lib/crypto/curve25519-selftest.o: In function `curve25519_selftest':
curve25519-selftest.c:(.init.text+0x60): undefined reference to `__crypto_memneq'
curve25519-selftest.c:(.init.text+0xec): undefined reference to `__crypto_memneq'
curve25519-selftest.c:(.init.text+0x114): undefined reference to `__crypto_memneq'
curve25519-selftest.c:(.init.text+0x154): undefined reference to `__crypto_memneq'
Reported-by: Zheng Bin <zhengbin13@huawei.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: stable@vger.kernel.org
Fixes: aa127963f1ca ("crypto: lib/curve25519 - re-add selftests")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This is used by code that doesn't need CONFIG_CRYPTO, so move this into
lib/ with a Kconfig option so that it can be selected by whatever needs
it.
This fixes a linker error Zheng pointed out when
CRYPTO_MANAGER_DISABLE_TESTS!=y and CRYPTO=m:
lib/crypto/curve25519-selftest.o: In function `curve25519_selftest':
curve25519-selftest.c:(.init.text+0x60): undefined reference to `__crypto_memneq'
curve25519-selftest.c:(.init.text+0xec): undefined reference to `__crypto_memneq'
curve25519-selftest.c:(.init.text+0x114): undefined reference to `__crypto_memneq'
curve25519-selftest.c:(.init.text+0x154): undefined reference to `__crypto_memneq'
Reported-by: Zheng Bin <zhengbin13@huawei.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: stable@vger.kernel.org
Fixes: aa127963f1ca ("crypto: lib/curve25519 - re-add selftests")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Pull tracing updates from Steven Rostedt:
"The majority of the changes are for fixes and clean ups.
Notable changes:
- Rework trace event triggers code to be easier to interact with.
- Support for embedding bootconfig with the kernel (as suppose to
having it embedded in initram). This is useful for embedded boards
without initram disks.
- Speed up boot by parallelizing the creation of tracefs files.
- Allow absolute ring buffer timestamps handle timestamps that use
more than 59 bits.
- Added new tracing clock "TAI" (International Atomic Time)
- Have weak functions show up in available_filter_function list as:
__ftrace_invalid_address___<invalid-offset> instead of using the
name of the function before it"
* tag 'trace-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (52 commits)
ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid adding weak function
tracing: Fix comments for event_trigger_separate_filter()
x86/traceponit: Fix comment about irq vector tracepoints
x86,tracing: Remove unused headers
ftrace: Clean up hash direct_functions on register failures
tracing: Fix comments of create_filter()
tracing: Disable kcov on trace_preemptirq.c
tracing: Initialize integer variable to prevent garbage return value
ftrace: Fix typo in comment
ftrace: Remove return value of ftrace_arch_modify_*()
tracing: Cleanup code by removing init "char *name"
tracing: Change "char *" string form to "char []"
tracing/timerlat: Do not wakeup the thread if the trace stops at the IRQ
tracing/timerlat: Print stacktrace in the IRQ handler if needed
tracing/timerlat: Notify IRQ new max latency only if stop tracing is set
kprobes: Fix build errors with CONFIG_KRETPROBES=n
tracing: Fix return value of trace_pid_write()
tracing: Fix potential double free in create_var_ref()
tracing: Use strim() to remove whitespace instead of doing it manually
ftrace: Deal with error return code of the ftrace_process_locs() function
...
|
|
Some temperature and voltage sensors use a polynomial to convert between
raw data points and actual temperature or voltage. The polynomial is
usually the result of a curve fitting of the diode characteristic.
The BT1 PVT hwmon driver already uses such a polynonmial calculation
which is rather generic. Move it to lib/ so other drivers can reuse it.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220401214032.3738095-2-michael@walle.cc
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This allows kernel developer to embed a default bootconfig file in
the kernel instead of embedding it in the initrd. This will be good
for who are using the kernel without initrd, or who needs a default
bootconfigs.
This needs to set two kconfigs: CONFIG_BOOT_CONFIG_EMBED=y and set
the file path to CONFIG_BOOT_CONFIG_EMBED_FILE.
Note that you still need 'bootconfig' command line option to load the
embedded bootconfig. Also if you boot using an initrd with a different
bootconfig, the kernel will use the bootconfig in the initrd, instead
of the default bootconfig.
Link: https://lkml.kernel.org/r/164921227943.1090670.14035119557571329218.stgit@devnote2
Cc: Padmanabha Srinivasaiah <treasure4paddy@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Linux Kbuild mailing list <linux-kbuild@vger.kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Since the APIs defined in the bootconfig.o are not individually used,
it is meaningless to build it as library by lib-y. Use obj-y for that.
Link: https://lkml.kernel.org/r/164921225875.1090670.15565363126983098971.stgit@devnote2
Cc: Padmanabha Srinivasaiah <treasure4paddy@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Linux Kbuild mailing list <linux-kbuild@vger.kernel.org>
Reported-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Pull FORTIFY_SOURCE updates from Kees Cook:
"This series consists of two halves:
- strict compile-time buffer size checking under FORTIFY_SOURCE for
the memcpy()-family of functions (for extensive details and
rationale, see the first commit)
- enabling FORTIFY_SOURCE for Clang, which has had many overlapping
bugs that we've finally worked past"
* tag 'memcpy-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
fortify: Add Clang support
fortify: Make sure strlen() may still be used as a constant expression
fortify: Use __diagnose_as() for better diagnostic coverage
fortify: Make pointer arguments const
Compiler Attributes: Add __diagnose_as for Clang
Compiler Attributes: Add __overloadable for Clang
Compiler Attributes: Add __pass_object_size for Clang
fortify: Replace open-coded __gnu_inline attribute
fortify: Update compile-time tests for Clang 14
fortify: Detect struct member overflows in memset() at compile-time
fortify: Detect struct member overflows in memmove() at compile-time
fortify: Detect struct member overflows in memcpy() at compile-time
|
|
Pull block layer 64-bit data integrity support from Jens Axboe:
"This adds support for 64-bit data integrity in the block layer and in
NVMe"
* tag 'for-5.18/64bit-pi-2022-03-25' of git://git.kernel.dk/linux-block:
crypto: fix crc64 testmgr digest byte order
nvme: add support for enhanced metadata
block: add pi for extended integrity
crypto: add rocksoft 64b crc guard tag framework
lib: add rocksoft model crc64
linux/kernel: introduce lower_48_bits function
asm-generic: introduce be48 unaligned accessors
nvme: allow integrity on extended metadata formats
block: support pi with extended metadata
|
|
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
|
|
Convert stackinit unit tests to KUnit, for better integration
into the kernel self test framework. Includes a rename of
test_stackinit.c to stackinit_kunit.c, and CONFIG_TEST_STACKINIT to
CONFIG_STACKINIT_KUNIT_TEST.
Adjust expected test results based on which stack initialization method
was chosen:
$ CMD="./tools/testing/kunit/kunit.py run stackinit --raw_output \
--arch=x86_64 --kconfig_add"
$ $CMD | grep stackinit:
# stackinit: pass:36 fail:0 skip:29 total:65
$ $CMD CONFIG_GCC_PLUGIN_STRUCTLEAK_USER=y | grep stackinit:
# stackinit: pass:37 fail:0 skip:28 total:65
$ $CMD CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF=y | grep stackinit:
# stackinit: pass:55 fail:0 skip:10 total:65
$ $CMD CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL=y | grep stackinit:
# stackinit: pass:62 fail:0 skip:3 total:65
$ $CMD CONFIG_INIT_STACK_ALL_PATTERN=y --make_option LLVM=1 | grep stackinit:
# stackinit: pass:60 fail:0 skip:5 total:65
$ $CMD CONFIG_INIT_STACK_ALL_ZERO=y --make_option LLVM=1 | grep stackinit:
# stackinit: pass:60 fail:0 skip:5 total:65
Temporarily remove the userspace-build mode, which will be restored in a
later patch.
Expand the size of the pre-case switch variable so it doesn't get
accidentally cleared.
Cc: David Gow <davidgow@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
---
v1: https://lore.kernel.org/lkml/20220224055145.1853657-1-keescook@chromium.org
v2:
- split "userspace KUnit stub" into separate header and patch (Daniel)
- Improve commit log and comments (David)
- Provide mapping of expected XFAIL tests to CONFIGs (David)
|
|
Add a KUnit based selftest for fprobe interface.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/164735295554.1084943.18347620679928750960.stgit@devnote2
|
|
Hardware specific features may be able to calculate a crc64, so provide
a framework for drivers to register their implementation. If nothing is
registered, fallback to the generic table lookup implementation. The
implementation is modeled after the crct10dif equivalent.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20220303201312.3255347-7-kbusch@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Convert overflow unit tests to KUnit, for better integration into the
kernel self test framework. Includes a rename of test_overflow.c to
overflow_kunit.c, and CONFIG_TEST_OVERFLOW to CONFIG_OVERFLOW_KUNIT_TEST.
$ ./tools/testing/kunit/kunit.py run overflow
...
[14:33:51] Starting KUnit Kernel (1/1)...
[14:33:51] ============================================================
[14:33:51] ================== overflow (11 subtests) ==================
[14:33:51] [PASSED] u8_overflow_test
[14:33:51] [PASSED] s8_overflow_test
[14:33:51] [PASSED] u16_overflow_test
[14:33:51] [PASSED] s16_overflow_test
[14:33:51] [PASSED] u32_overflow_test
[14:33:51] [PASSED] s32_overflow_test
[14:33:51] [PASSED] u64_overflow_test
[14:33:51] [PASSED] s64_overflow_test
[14:33:51] [PASSED] overflow_shift_test
[14:33:51] [PASSED] overflow_allocation_test
[14:33:51] [PASSED] overflow_size_helpers_test
[14:33:51] ==================== [PASSED] overflow =====================
[14:33:51] ============================================================
[14:33:51] Testing complete. Passed: 11, Failed: 0, Crashed: 0, Skipped: 0, Errors: 0
[14:33:51] Elapsed time: 12.525s total, 0.001s configuring, 12.402s building, 0.101s running
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Co-developed-by: Vitor Massaru Iha <vitor@massaru.org>
Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
Link: https://lore.kernel.org/lkml/20200720224418.200495-1-vitor@massaru.org/
Co-developed-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Link: https://lore.kernel.org/linux-kselftest/20210503211536.1384578-1-dlatypov@google.com/
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/lkml/CAKwvOdm62iA1dNiC6Q11UJ-MnTqtc4kXkm-ubPaFMK824_k0nw@mail.gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/lkml/CABVgOS=TWVh649_Vjo3wnMu9gZnq66gkV-LtGgsksAWMqc+MSA@mail.gmail.com
|
|
memcpy() is dead; long live memcpy()
tl;dr: In order to eliminate a large class of common buffer overflow
flaws that continue to persist in the kernel, have memcpy() (under
CONFIG_FORTIFY_SOURCE) perform bounds checking of the destination struct
member when they have a known size. This would have caught all of the
memcpy()-related buffer write overflow flaws identified in at least the
last three years.
Background and analysis:
While stack-based buffer overflow flaws are largely mitigated by stack
canaries (and similar) features, heap-based buffer overflow flaws continue
to regularly appear in the kernel. Many classes of heap buffer overflows
are mitigated by FORTIFY_SOURCE when using the strcpy() family of
functions, but a significant number remain exposed through the memcpy()
family of functions.
At its core, FORTIFY_SOURCE uses the compiler's __builtin_object_size()
internal[0] to determine the available size at a target address based on
the compile-time known structure layout details. It operates in two
modes: outer bounds (0) and inner bounds (1). In mode 0, the size of the
enclosing structure is used. In mode 1, the size of the specific field
is used. For example:
struct object {
u16 scalar1; /* 2 bytes */
char array[6]; /* 6 bytes */
u64 scalar2; /* 8 bytes */
u32 scalar3; /* 4 bytes */
u32 scalar4; /* 4 bytes */
} instance;
__builtin_object_size(instance.array, 0) == 22, since the remaining size
of the enclosing structure starting from "array" is 22 bytes (6 + 8 +
4 + 4).
__builtin_object_size(instance.array, 1) == 6, since the remaining size
of the specific field "array" is 6 bytes.
The initial implementation of FORTIFY_SOURCE used mode 0 because there
were many cases of both strcpy() and memcpy() functions being used to
write (or read) across multiple fields in a structure. For example,
it would catch this, which is writing 2 bytes beyond the end of
"instance":
memcpy(&instance.array, data, 25);
While this didn't protect against overwriting adjacent fields in a given
structure, it would at least stop overflows from reaching beyond the
end of the structure into neighboring memory, and provided a meaningful
mitigation of a subset of buffer overflow flaws. However, many desirable
targets remain within the enclosing structure (for example function
pointers).
As it happened, there were very few cases of strcpy() family functions
intentionally writing beyond the end of a string buffer. Once all known
cases were removed from the kernel, the strcpy() family was tightened[1]
to use mode 1, providing greater mitigation coverage.
What remains is switching memcpy() to mode 1 as well, but making the
switch is much more difficult because of how frustrating it can be to
find existing "normal" uses of memcpy() that expect to write (or read)
across multiple fields. The root cause of the problem is that the C
language lacks a common pattern to indicate the intent of an author's
use of memcpy(), and is further complicated by the available compile-time
and run-time mitigation behaviors.
The FORTIFY_SOURCE mitigation comes in two halves: the compile-time half,
when both the buffer size _and_ the length of the copy is known, and the
run-time half, when only the buffer size is known. If neither size is
known, there is no bounds checking possible. At compile-time when the
compiler sees that a length will always exceed a known buffer size,
a warning can be deterministically emitted. For the run-time half,
the length is tested against the known size of the buffer, and the
overflowing operation is detected. (The performance overhead for these
tests is virtually zero.)
It is relatively easy to find compile-time false-positives since a warning
is always generated. Fixing the false positives, however, can be very
time-consuming as there are hundreds of instances. While it's possible
some over-read conditions could lead to kernel memory exposures, the bulk
of the risk comes from the run-time flaws where the length of a write
may end up being attacker-controlled and lead to an overflow.
Many of the compile-time false-positives take a form similar to this:
memcpy(&instance.scalar2, data, sizeof(instance.scalar2) +
sizeof(instance.scalar3));
and the run-time ones are similar, but lack a constant expression for the
size of the copy:
memcpy(instance.array, data, length);
The former is meant to cover multiple fields (though its style has been
frowned upon more recently), but has been technically legal. Both lack
any expressivity in the C language about the author's _intent_ in a way
that a compiler can check when the length isn't known at compile time.
A comment doesn't work well because what's needed is something a compiler
can directly reason about. Is a given memcpy() call expected to overflow
into neighbors? Is it not? By using the new struct_group() macro, this
intent can be much more easily encoded.
It is not as easy to find the run-time false-positives since the code path
to exercise a seemingly out-of-bounds condition that is actually expected
may not be trivially reachable. Tightening the restrictions to block an
operation for a false positive will either potentially create a greater
flaw (if a copy is truncated by the mitigation), or destabilize the kernel
(e.g. with a BUG()), making things completely useless for the end user.
As a result, tightening the memcpy() restriction (when there is a
reasonable level of uncertainty of the number of false positives), needs
to first WARN() with no truncation. (Though any sufficiently paranoid
end-user can always opt to set the panic_on_warn=1 sysctl.) Once enough
development time has passed, the mitigation can be further intensified.
(Note that this patch is only the compile-time checking step, which is
a prerequisite to doing run-time checking, which will come in future
patches.)
Given the potential frustrations of weeding out all the false positives
when tightening the run-time checks, it is reasonable to wonder if these
changes would actually add meaningful protection. Looking at just the
last three years, there are 23 identified flaws with a CVE that mention
"buffer overflow", and 11 are memcpy()-related buffer overflows.
(For the remaining 12: 7 are array index overflows that would be
mitigated by systems built with CONFIG_UBSAN_BOUNDS=y: CVE-2019-0145,
CVE-2019-14835, CVE-2019-14896, CVE-2019-14897, CVE-2019-14901,
CVE-2019-17666, CVE-2021-28952. 2 are miscalculated allocation
sizes which could be mitigated with memory tagging: CVE-2019-16746,
CVE-2019-2181. 1 is an iovec buffer bug maybe mitigated by memory tagging:
CVE-2020-10742. 1 is a type confusion bug mitigated by stack canaries:
CVE-2020-10942. 1 is a string handling logic bug with no mitigation I'm
aware of: CVE-2021-28972.)
At my last count on an x86_64 allmodconfig build, there are 35,294
calls to memcpy(). With callers instrumented to report all places
where the buffer size is known but the length remains unknown (i.e. a
run-time bounds check is added), we can count how many new run-time
bounds checks are added when the destination and source arguments of
memcpy() are changed to use "mode 1" bounds checking: 1,276. This means
for the future run-time checking, there is a worst-case upper bounds
of 3.6% false positives to fix. In addition, there were around 150 new
compile-time warnings to evaluate and fix (which have now been fixed).
With this instrumentation it's also possible to compare the places where
the known 11 memcpy() flaw overflows manifested against the resulting
list of potential new run-time bounds checks, as a measure of potential
efficacy of the tightened mitigation. Much to my surprise, horror, and
delight, all 11 flaws would have been detected by the newly added run-time
bounds checks, making this a distinctly clear mitigation improvement: 100%
coverage for known memcpy() flaws, with a possible 2 orders of magnitude
gain in coverage over existing but undiscovered run-time dynamic length
flaws (i.e. 1265 newly covered sites in addition to the 11 known), against
only <4% of all memcpy() callers maybe gaining a false positive run-time
check, with only about 150 new compile-time instances needing evaluation.
Specifically these would have been mitigated:
CVE-2020-24490 https://git.kernel.org/linus/a2ec905d1e160a33b2e210e45ad30445ef26ce0e
CVE-2020-12654 https://git.kernel.org/linus/3a9b153c5591548612c3955c9600a98150c81875
CVE-2020-12653 https://git.kernel.org/linus/b70261a288ea4d2f4ac7cd04be08a9f0f2de4f4d
CVE-2019-14895 https://git.kernel.org/linus/3d94a4a8373bf5f45cf5f939e88b8354dbf2311b
CVE-2019-14816 https://git.kernel.org/linus/7caac62ed598a196d6ddf8d9c121e12e082cac3a
CVE-2019-14815 https://git.kernel.org/linus/7caac62ed598a196d6ddf8d9c121e12e082cac3a
CVE-2019-14814 https://git.kernel.org/linus/7caac62ed598a196d6ddf8d9c121e12e082cac3a
CVE-2019-10126 https://git.kernel.org/linus/69ae4f6aac1578575126319d3f55550e7e440449
CVE-2019-9500 https://git.kernel.org/linus/1b5e2423164b3670e8bc9174e4762d297990deff
no-CVE-yet https://git.kernel.org/linus/130f634da1af649205f4a3dd86cbe5c126b57914
no-CVE-yet https://git.kernel.org/linus/d10a87a3535cce2b890897914f5d0d83df669c63
To accelerate the review of potential run-time false positives, it's
also worth noting that it is possible to partially automate checking
by examining the memcpy() buffer argument to check for the destination
struct member having a neighboring array member. It is reasonable to
expect that the vast majority of run-time false positives would look like
the already evaluated and fixed compile-time false positives, where the
most common pattern is neighboring arrays. (And, FWIW, many of the
compile-time fixes were actual bugs, so it is reasonable to assume we'll
have similar cases of actual bugs getting fixed for run-time checks.)
Implementation:
Tighten the memcpy() destination buffer size checking to use the actual
("mode 1") target buffer size as the bounds check instead of their
enclosing structure's ("mode 0") size. Use a common inline for memcpy()
(and memmove() in a following patch), since all the tests are the
same. All new cross-field memcpy() uses must use the struct_group() macro
or similar to target a specific range of fields, so that FORTIFY_SOURCE
can reason about the size and safety of the copy.
For now, cross-member "mode 1" _read_ detection at compile-time will be
limited to W=1 builds, since it is, unfortunately, very common. As the
priority is solving write overflows, read overflows will be part of a
future phase (and can be fixed in parallel, for anyone wanting to look
at W=1 build output).
For run-time, the "mode 0" size checking and mitigation is left unchanged,
with "mode 1" to be added in stages. In this patch, no new run-time
checks are added. Future patches will first bounds-check writes,
and only perform a WARN() for now. This way any missed run-time false
positives can be flushed out over the coming several development cycles,
but system builders who have tested their workloads to be WARN()-free
can enable the panic_on_warn=1 sysctl to immediately gain a mitigation
against this class of buffer overflows. Once that is under way, run-time
bounds-checking of reads can be similarly enabled.
Related classes of flaws that will remain unmitigated:
- memcpy() with flexible array structures, as the compiler does not
currently have visibility into the size of the trailing flexible
array. These can be fixed in the future by refactoring such cases
to use a new set of flexible array structure helpers to perform the
common serialization/deserialization code patterns doing allocation
and/or copying.
- memcpy() with raw pointers (e.g. void *, char *, etc), or otherwise
having their buffer size unknown at compile time, have no good
mitigation beyond memory tagging (and even that would only protect
against inter-object overflow, not intra-object neighboring field
overflows), or refactoring. Some kind of "fat pointer" solution is
likely needed to gain proper size-of-buffer awareness. (e.g. see
struct membuf)
- type confusion where a higher level type's allocation size does
not match the resulting cast type eventually passed to a deeper
memcpy() call where the compiler cannot see the true type. In
theory, greater static analysis could catch these, and the use
of -Warray-bounds will help find some of these.
[0] https://gcc.gnu.org/onlinedocs/gcc/Object-Size-Checking.html
[1] https://git.kernel.org/linus/6a39e62abbafd1d58d1722f40c7d26ef379c6a2f
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Merge more updates from Andrew Morton:
"55 patches.
Subsystems affected by this patch series: percpu, procfs, sysctl,
misc, core-kernel, get_maintainer, lib, checkpatch, binfmt, nilfs2,
hfs, fat, adfs, panic, delayacct, kconfig, kcov, and ubsan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (55 commits)
lib: remove redundant assignment to variable ret
ubsan: remove CONFIG_UBSAN_OBJECT_SIZE
kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR
lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB
btrfs: use generic Kconfig option for 256kB page size limit
arch/Kconfig: split PAGE_SIZE_LESS_THAN_256KB from PAGE_SIZE_LESS_THAN_64KB
configs: introduce debug.config for CI-like setup
delayacct: track delays from memory compact
Documentation/accounting/delay-accounting.rst: add thrashing page cache and direct compact
delayacct: cleanup flags in struct task_delay_info and functions use it
delayacct: fix incomplete disable operation when switch enable to disable
delayacct: support swapin delay accounting for swapping without blkio
panic: remove oops_id
panic: use error_report_end tracepoint on warnings
fs/adfs: remove unneeded variable make code cleaner
FAT: use io_schedule_timeout() instead of congestion_wait()
hfsplus: use struct_group_attr() for memcpy() region
nilfs2: remove redundant pointer sbufs
fs/binfmt_elf: use PT_LOAD p_align values for static PIE
const_structs.checkpatch: add frequently used ops structs
...
|
|
Use KUnit framework to make tests more easily integrable with CIs. Even
though these tests are not yet properly written as unit tests this
change should help in debugging.
Also remove kernel messages (i.e. through pr_info) as KUnit handles all
debugging output and let it handle module init and exit details.
Link: https://lkml.kernel.org/r/20211208183711.390454-6-isabbasso@riseup.net
Reviewed-by: David Gow <davidgow@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: David Gow <davidgow@google.com>
Co-developed-by: Augusto Durães Camargo <augusto.duraes33@gmail.com>
Signed-off-by: Augusto Durães Camargo <augusto.duraes33@gmail.com>
Co-developed-by: Enzo Ferreira <ferreiraenzoa@gmail.com>
Signed-off-by: Enzo Ferreira <ferreiraenzoa@gmail.com>
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Split TEST_HASH so that each entry only has one file.
Note that there's no stringhash test file, but actually
<linux/stringhash.h> tests are performed in lib/test_hash.c.
Link: https://lkml.kernel.org/r/20211208183711.390454-5-isabbasso@riseup.net
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Cc: Augusto Durães Camargo <augusto.duraes33@gmail.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: Enzo Ferreira <ferreiraenzoa@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: kernel test robot <lkp@intel.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This module uses reference tracker, forcing two issues.
1) Double free of a tracker
2) leak of two trackers, one being allocated from softirq context.
"modprobe test_ref_tracker" would emit the following traces.
(Use scripts/decode_stacktrace.sh if necessary)
[ 171.648681] reference already released.
[ 171.653213] allocated in:
[ 171.656523] alloctest_ref_tracker_alloc2+0x1c/0x20 [test_ref_tracker]
[ 171.656526] init_module+0x86/0x1000 [test_ref_tracker]
[ 171.656528] do_one_initcall+0x9c/0x220
[ 171.656532] do_init_module+0x60/0x240
[ 171.656536] load_module+0x32b5/0x3610
[ 171.656538] __do_sys_init_module+0x148/0x1a0
[ 171.656540] __x64_sys_init_module+0x1d/0x20
[ 171.656542] do_syscall_64+0x4a/0xb0
[ 171.656546] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 171.656549] freed in:
[ 171.659520] alloctest_ref_tracker_free+0x13/0x20 [test_ref_tracker]
[ 171.659522] init_module+0xec/0x1000 [test_ref_tracker]
[ 171.659523] do_one_initcall+0x9c/0x220
[ 171.659525] do_init_module+0x60/0x240
[ 171.659527] load_module+0x32b5/0x3610
[ 171.659529] __do_sys_init_module+0x148/0x1a0
[ 171.659532] __x64_sys_init_module+0x1d/0x20
[ 171.659534] do_syscall_64+0x4a/0xb0
[ 171.659536] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 171.659575] ------------[ cut here ]------------
[ 171.659576] WARNING: CPU: 5 PID: 13016 at lib/ref_tracker.c:112 ref_tracker_free+0x224/0x270
[ 171.659581] Modules linked in: test_ref_tracker(+)
[ 171.659591] CPU: 5 PID: 13016 Comm: modprobe Tainted: G S 5.16.0-smp-DEV #290
[ 171.659595] RIP: 0010:ref_tracker_free+0x224/0x270
[ 171.659599] Code: 5e 41 5f 5d c3 48 c7 c7 04 9c 74 a6 31 c0 e8 62 ee 67 00 83 7b 14 00 75 1a 83 7b 18 00 75 30 4c 89 ff 4c 89 f6 e8 9c 00 69 00 <0f> 0b bb ea ff ff ff eb ae 48 c7 c7 3a 0a 77 a6 31 c0 e8 34 ee 67
[ 171.659601] RSP: 0018:ffff89058ba0bbd0 EFLAGS: 00010286
[ 171.659603] RAX: 0000000000000029 RBX: ffff890586b19780 RCX: 08895bff57c7d100
[ 171.659604] RDX: c0000000ffff7fff RSI: 0000000000000282 RDI: ffffffffc0407000
[ 171.659606] RBP: ffff89058ba0bc88 R08: 0000000000000000 R09: ffffffffa6f342e0
[ 171.659607] R10: 00000000ffff7fff R11: 0000000000000000 R12: 000000008f000000
[ 171.659608] R13: 0000000000000014 R14: 0000000000000282 R15: ffffffffc0407000
[ 171.659609] FS: 00007f97ea29d740(0000) GS:ffff8923ff940000(0000) knlGS:0000000000000000
[ 171.659611] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 171.659613] CR2: 00007f97ea299000 CR3: 0000000186b4a004 CR4: 00000000001706e0
[ 171.659614] Call Trace:
[ 171.659615] <TASK>
[ 171.659631] ? alloctest_ref_tracker_free+0x13/0x20 [test_ref_tracker]
[ 171.659633] ? init_module+0x105/0x1000 [test_ref_tracker]
[ 171.659636] ? do_one_initcall+0x9c/0x220
[ 171.659638] ? do_init_module+0x60/0x240
[ 171.659641] ? load_module+0x32b5/0x3610
[ 171.659644] ? __do_sys_init_module+0x148/0x1a0
[ 171.659646] ? __x64_sys_init_module+0x1d/0x20
[ 171.659649] ? do_syscall_64+0x4a/0xb0
[ 171.659652] ? entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 171.659656] ? 0xffffffffc040a000
[ 171.659658] alloctest_ref_tracker_free+0x13/0x20 [test_ref_tracker]
[ 171.659660] init_module+0x105/0x1000 [test_ref_tracker]
[ 171.659663] do_one_initcall+0x9c/0x220
[ 171.659666] do_init_module+0x60/0x240
[ 171.659669] load_module+0x32b5/0x3610
[ 171.659672] __do_sys_init_module+0x148/0x1a0
[ 171.659676] __x64_sys_init_module+0x1d/0x20
[ 171.659678] do_syscall_64+0x4a/0xb0
[ 171.659694] ? exc_page_fault+0x6e/0x140
[ 171.659696] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 171.659698] RIP: 0033:0x7f97ea3dbe7a
[ 171.659700] Code: 48 8b 0d 61 8d 06 00 f7 d8 64 89 01 48 83 c8 ff c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2e 8d 06 00 f7 d8 64 89 01 48
[ 171.659701] RSP: 002b:00007ffea67ce608 EFLAGS: 00000246 ORIG_RAX: 00000000000000af
[ 171.659703] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f97ea3dbe7a
[ 171.659704] RDX: 00000000013a0ba0 RSI: 0000000000002808 RDI: 00007f97ea299000
[ 171.659705] RBP: 00007ffea67ce670 R08: 0000000000000003 R09: 0000000000000000
[ 171.659706] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000013a1048
[ 171.659707] R13: 00000000013a0ba0 R14: 0000000001399930 R15: 00000000013a1030
[ 171.659709] </TASK>
[ 171.659710] ---[ end trace f5dbd6afa41e60a9 ]---
[ 171.659712] leaked reference.
[ 171.663393] alloctest_ref_tracker_alloc0+0x1c/0x20 [test_ref_tracker]
[ 171.663395] test_ref_tracker_timer_func+0x9/0x20 [test_ref_tracker]
[ 171.663397] call_timer_fn+0x31/0x140
[ 171.663401] expire_timers+0x46/0x110
[ 171.663403] __run_timers+0x16f/0x1b0
[ 171.663404] run_timer_softirq+0x1d/0x40
[ 171.663406] __do_softirq+0x148/0x2d3
[ 171.663408] leaked reference.
[ 171.667101] alloctest_ref_tracker_alloc1+0x1c/0x20 [test_ref_tracker]
[ 171.667103] init_module+0x81/0x1000 [test_ref_tracker]
[ 171.667104] do_one_initcall+0x9c/0x220
[ 171.667106] do_init_module+0x60/0x240
[ 171.667108] load_module+0x32b5/0x3610
[ 171.667111] __do_sys_init_module+0x148/0x1a0
[ 171.667113] __x64_sys_init_module+0x1d/0x20
[ 171.667115] do_syscall_64+0x4a/0xb0
[ 171.667117] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 171.667131] ------------[ cut here ]------------
[ 171.667132] WARNING: CPU: 5 PID: 13016 at lib/ref_tracker.c:30 ref_tracker_dir_exit+0x104/0x130
[ 171.667136] Modules linked in: test_ref_tracker(+)
[ 171.667144] CPU: 5 PID: 13016 Comm: modprobe Tainted: G S W 5.16.0-smp-DEV #290
[ 171.667147] RIP: 0010:ref_tracker_dir_exit+0x104/0x130
[ 171.667150] Code: 01 00 00 00 00 ad de 48 89 03 4c 89 63 08 48 89 df e8 20 a0 d5 ff 4c 89 f3 4d 39 ee 75 a8 4c 89 ff 48 8b 75 d0 e8 7c 05 69 00 <0f> 0b eb 0c 4c 89 ff 48 8b 75 d0 e8 6c 05 69 00 41 8b 47 08 83 f8
[ 171.667151] RSP: 0018:ffff89058ba0bc68 EFLAGS: 00010286
[ 171.667154] RAX: 08895bff57c7d100 RBX: ffffffffc0407010 RCX: 000000000000003b
[ 171.667156] RDX: 000000000000003c RSI: 0000000000000282 RDI: ffffffffc0407000
[ 171.667157] RBP: ffff89058ba0bc98 R08: 0000000000000000 R09: ffffffffa6f342e0
[ 171.667159] R10: 00000000ffff7fff R11: 0000000000000000 R12: dead000000000122
[ 171.667160] R13: ffffffffc0407010 R14: ffffffffc0407010 R15: ffffffffc0407000
[ 171.667162] FS: 00007f97ea29d740(0000) GS:ffff8923ff940000(0000) knlGS:0000000000000000
[ 171.667164] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 171.667166] CR2: 00007f97ea299000 CR3: 0000000186b4a004 CR4: 00000000001706e0
[ 171.667169] Call Trace:
[ 171.667170] <TASK>
[ 171.667171] ? 0xffffffffc040a000
[ 171.667173] init_module+0x126/0x1000 [test_ref_tracker]
[ 171.667175] do_one_initcall+0x9c/0x220
[ 171.667179] do_init_module+0x60/0x240
[ 171.667182] load_module+0x32b5/0x3610
[ 171.667186] __do_sys_init_module+0x148/0x1a0
[ 171.667189] __x64_sys_init_module+0x1d/0x20
[ 171.667192] do_syscall_64+0x4a/0xb0
[ 171.667194] ? exc_page_fault+0x6e/0x140
[ 171.667196] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 171.667199] RIP: 0033:0x7f97ea3dbe7a
[ 171.667200] Code: 48 8b 0d 61 8d 06 00 f7 d8 64 89 01 48 83 c8 ff c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2e 8d 06 00 f7 d8 64 89 01 48
[ 171.667201] RSP: 002b:00007ffea67ce608 EFLAGS: 00000246 ORIG_RAX: 00000000000000af
[ 171.667203] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f97ea3dbe7a
[ 171.667204] RDX: 00000000013a0ba0 RSI: 0000000000002808 RDI: 00007f97ea299000
[ 171.667205] RBP: 00007ffea67ce670 R08: 0000000000000003 R09: 0000000000000000
[ 171.667206] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000013a1048
[ 171.667207] R13: 00000000013a0ba0 R14: 0000000001399930 R15: 00000000013a1030
[ 171.667209] </TASK>
[ 171.667210] ---[ end trace f5dbd6afa41e60aa ]---
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It can be hard to track where references are taken and released.
In networking, we have annoying issues at device or netns dismantles,
and we had various proposals to ease root causing them.
This patch adds new infrastructure pairing refcount increases
and decreases. This will self document code, because programmers
will have to associate increments/decrements.
This is controled by CONFIG_REF_TRACKER which can be selected
by users of this feature.
This adds both cpu and memory costs, and thus should probably be
used with care.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull tracing updates from Steven Rostedt:
- kprobes: Restructured stack unwinder to show properly on x86 when a
stack dump happens from a kretprobe callback.
- Fix to bootconfig parsing
- Have tracefs allow owner and group permissions by default (only
denying others). There's been pressure to allow non root to tracefs
in a controlled fashion, and using groups is probably the safest.
- Bootconfig memory managament updates.
- Bootconfig clean up to have the tools directory be less dependent on
changes in the kernel tree.
- Allow perf to be traced by function tracer.
- Rewrite of function graph tracer to be a callback from the function
tracer instead of having its own trampoline (this change will happen
on an arch by arch basis, and currently only x86_64 implements it).
- Allow multiple direct trampolines (bpf hooks to functions) be batched
together in one synchronization.
- Allow histogram triggers to add variables that can perform
calculations against the event's fields.
- Use the linker to determine architecture callbacks from the ftrace
trampoline to allow for proper parameter prototypes and prevent
warnings from the compiler.
- Extend histogram triggers to key off of variables.
- Have trace recursion use bit magic to determine preempt context over
if branches.
- Have trace recursion disable preemption as all use cases do anyway.
- Added testing for verification of tracing utilities.
- Various small clean ups and fixes.
* tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (101 commits)
tracing/histogram: Fix semicolon.cocci warnings
tracing/histogram: Fix documentation inline emphasis warning
tracing: Increase PERF_MAX_TRACE_SIZE to handle Sentinel1 and docker together
tracing: Show size of requested perf buffer
bootconfig: Initialize ret in xbc_parse_tree()
ftrace: do CPU checking after preemption disabled
ftrace: disable preemption when recursion locked
tracing/histogram: Document expression arithmetic and constants
tracing/histogram: Optimize division by a power of 2
tracing/histogram: Covert expr to const if both operands are constants
tracing/histogram: Simplify handling of .sym-offset in expressions
tracing: Fix operator precedence for hist triggers expression
tracing: Add division and multiplication support for hist triggers
tracing: Add support for creating hist trigger variables from literal
selftests/ftrace: Stop tracing while reading the trace file by default
MAINTAINERS: Update KPROBES and TRACING entries
test_kprobes: Move it from kernel/ to lib/
docs, kprobes: Remove invalid URL and add new reference
samples/kretprobes: Fix return value if register_kretprobe() failed
lib/bootconfig: Fix the xbc_get_info kerneldoc
...
|
|
Pull overflow updates from Kees Cook:
"The end goal of the current buffer overflow detection work[0] is to
gain full compile-time and run-time coverage of all detectable buffer
overflows seen via array indexing or memcpy(), memmove(), and
memset(). The str*() family of functions already have full coverage.
While much of the work for these changes have been on-going for many
releases (i.e. 0-element and 1-element array replacements, as well as
avoiding false positives and fixing discovered overflows[1]), this
series contains the foundational elements of several related buffer
overflow detection improvements by providing new common helpers and
FORTIFY_SOURCE changes needed to gain the introspection required for
compiler visibility into array sizes. Also included are a handful of
already Acked instances using the helpers (or related clean-ups), with
many more waiting at the ready to be taken via subsystem-specific
trees[2].
The new helpers are:
- struct_group() for gaining struct member range introspection
- memset_after() and memset_startat() for clearing to the end of
structures
- DECLARE_FLEX_ARRAY() for using flex arrays in unions or alone in
structs
Also included is the beginning of the refactoring of FORTIFY_SOURCE to
support memcpy() introspection, fix missing and regressed coverage
under GCC, and to prepare to fix the currently broken Clang support.
Finishing this work is part of the larger series[0], but depends on
all the false positives and buffer overflow bug fixes to have landed
already and those that depend on this series to land.
As part of the FORTIFY_SOURCE refactoring, a set of both a
compile-time and run-time tests are added for FORTIFY_SOURCE and the
mem*()-family functions respectively. The compile time tests have
found a legitimate (though corner-case) bug[6] already.
Please note that the appearance of "panic" and "BUG" in the
FORTIFY_SOURCE refactoring are the result of relocating existing code,
and no new use of those code-paths are expected nor desired.
Finally, there are two tree-wide conversions for 0-element arrays and
flexible array unions to gain sane compiler introspection coverage
that result in no known object code differences.
After this series (and the changes that have now landed via netdev and
usb), we are very close to finally being able to build with
-Warray-bounds and -Wzero-length-bounds.
However, due corner cases in GCC[3] and Clang[4], I have not included
the last two patches that turn on these options, as I don't want to
introduce any known warnings to the build. Hopefully these can be
solved soon"
Link: https://lore.kernel.org/lkml/20210818060533.3569517-1-keescook@chromium.org/ [0]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/log/?qt=grep&q=FORTIFY_SOURCE [1]
Link: https://lore.kernel.org/lkml/202108220107.3E26FE6C9C@keescook/ [2]
Link: https://lore.kernel.org/lkml/3ab153ec-2798-da4c-f7b1-81b0ac8b0c5b@roeck-us.net/ [3]
Link: https://bugs.llvm.org/show_bug.cgi?id=51682 [4]
Link: https://lore.kernel.org/lkml/202109051257.29B29745C0@keescook/ [5]
Link: https://lore.kernel.org/lkml/20211020200039.170424-1-keescook@chromium.org/ [6]
* tag 'overflow-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (30 commits)
fortify: strlen: Avoid shadowing previous locals
compiler-gcc.h: Define __SANITIZE_ADDRESS__ under hwaddress sanitizer
treewide: Replace 0-element memcpy() destinations with flexible arrays
treewide: Replace open-coded flex arrays in unions
stddef: Introduce DECLARE_FLEX_ARRAY() helper
btrfs: Use memset_startat() to clear end of struct
string.h: Introduce memset_startat() for wiping trailing members and padding
xfrm: Use memset_after() to clear padding
string.h: Introduce memset_after() for wiping trailing members/padding
lib: Introduce CONFIG_MEMCPY_KUNIT_TEST
fortify: Add compile-time FORTIFY_SOURCE tests
fortify: Allow strlen() and strnlen() to pass compile-time known lengths
fortify: Prepare to improve strnlen() and strlen() warnings
fortify: Fix dropped strcpy() compile-time write overflow check
fortify: Explicitly disable Clang support
fortify: Move remaining fortify helpers into fortify-string.h
lib/string: Move helper functions out of string.c
compiler_types.h: Remove __compiletime_object_size()
cm4000_cs: Use struct_group() to zero struct cm4000_dev region
can: flexcan: Use struct_group() to zero struct flexcan_regs regions
...
|
|
Since config KPROBES_SANITY_TEST is in lib/Kconfig.debug, it is better to
let test_kprobes.c in lib/, just like other similar tests found in lib/.
Link: https://lkml.kernel.org/r/1635213091-24387-4-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Before changing anything about memcpy(), memmove(), and memset(), add
run-time tests to check basic behaviors for any regressions.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
While the run-time testing of FORTIFY_SOURCE is already present in
LKDTM, there is no testing of the expected compile-time detections. In
preparation for correctly supporting FORTIFY_SOURCE under Clang, adding
additional FORTIFY_SOURCE defenses, and making sure FORTIFY_SOURCE
doesn't silently regress with GCC, introduce a build-time test suite that
checks each expected compile-time failure condition.
As this is relatively backwards from standard build rules in the
sense that a successful test is actually a compile _failure_, create
a wrapper script to check for the correct errors, and wire it up as
a dummy dependency to lib/string.o, collecting the results into a log
file artifact.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The structleak plugin causes the stack frame size to grow immensely:
lib/bitfield_kunit.c: In function 'test_bitfields_constants':
lib/bitfield_kunit.c:93:1: error: the frame size of 7440 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
Turn it off in this file.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
Liam Howlett
Linus Torvalds
Alexander Potapenko
Andrey Konovalov
Greg Kroah-Hartman
Kees Cook
Jim Cromie
Bart Van Assche
Sander Vanheule
Eric Biggers
Hannes Reinecke
Yury Norov
Prasad Sodagudi
Jason A. Donenfeld
Michael Walle
Masami Hiramatsu
Keith Busch
Isabella Basso
Eric Dumazet
Tiezhu Yang
Arnd Bergmann