aboutsummaryrefslogtreecommitdiffstats
path: root/net/bluetooth/hci_conn.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-11-02Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnectLuiz Augusto von Dentz1-0/+11
When disconnecting an ISO link the controller may not generate HCI_EV_NUM_COMP_PKTS for unacked packets which needs to be restored in hci_conn_del otherwise the host would assume they are still in use and would not be able to use all the buffers available. Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Frédéric Danis <frederic.danis@collabora.com>
2022-11-02Bluetooth: hci_conn: Fix CIS connection dst_type handlingPauli Virtanen1-6/+1
hci_connect_cis and iso_connect_cis call hci_bind_cis inconsistently with dst_type being either ISO socket address type or the HCI type, but these values cannot be mixed like this. Fix this by using only the HCI type. CIS connection dst_type was also not initialized in hci_bind_cis, even though it is used in hci_conn_hash_lookup_cis to find existing connections. Set the value in hci_bind_cis, so that existing CIS connections are found e.g. when doing deferred socket connections, also when dst_type is not 0 (ADDR_LE_DEV_PUBLIC). Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-08-31Bluetooth: Move hci_abort_conn to hci_conn.cBrian Gix1-0/+76
hci_abort_conn() is a wrapper around a number of DISCONNECT and CREATE_CONN_CANCEL commands that was being invoked from hci_request request queues, which are now deprecated. There are two versions: hci_abort_conn() which can be invoked from the hci_event thread, and hci_abort_conn_sync() which can be invoked within a hci_sync cmd chain. Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-08-25Bluetooth: Convert SCO configure_datapath to hci_syncBrian Gix1-11/+75
Recoding HCI cmds to offload SCO codec to use hci_sync mechanism rather than deprecated hci_request mechanism. Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-08-08Bluetooth: hci_conn: Fix updating ISO QoS PHYLuiz Augusto von Dentz1-9/+2
BT_ISO_QOS has different semantics when it comes to QoS PHY as it uses 0x00 to disable a direction but that value is invalid over HCI and sockets using DEFER_SETUP to connect may attempt to use hci_bind_cis multiple times in order to detect if the parameters have changed, so to fix the code will now just mirror the PHY for the parameters of HCI_OP_LE_SET_CIG_PARAMS and will not update the PHY of the socket leaving it disabled. Fixes: 26afbd826ee32 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-22Bluetooth: Add initial implementation of BIS connectionsLuiz Augusto von Dentz1-53/+508
This adds initial support for BIS/BIG which includes: == Broadcaster role: Setup a periodic advertising and create a BIG == > tools/isotest -s 00:00:00:00:00:00 isotest[63]: Connected [00:00:00:00:00:00] isotest[63]: QoS BIG 0x00 BIS 0x00 Packing 0x00 Framing 0x00] isotest[63]: Output QoS [Interval 10000 us Latency 10 ms SDU 40 PHY 0x02 RTN 2] isotest[63]: Sending ... isotest[63]: Number of packets: 1 isotest[63]: Socket jitter buffer: 80 buffer < HCI Command: LE Set Perio.. (0x08|0x003e) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Parameters (0x08|0x003e) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x003f) plen 7 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Data (0x08|0x003f) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Perio.. (0x08|0x0040) plen 2 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Periodic Advertising Enable (0x08|0x0040) ncmd 1 Status: Success (0x00) < HCI Command: LE Create B.. (0x08|0x0068) plen 31 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) ... == Broadcast Receiver role: Create a PA Sync and BIG Sync == > tools/isotest -i hci1 -d 00:AA:01:00:00:00 isotest[66]: Waiting for connection 00:AA:01:00:00:00... < HCI Command: LE Periodic Advert.. (0x08|0x0044) plen 14 ... > HCI Event: Command Status (0x0f) plen 4 LE Periodic Advertising Create Sync (0x08|0x0044) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 ... > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Extended Advertising Report (0x0d) ... > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) ... < HCI Command: LE Broadcast Isoch.. (0x08|0x006b) plen 25 ... > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 17 LE Broadcast Isochronous Group Sync Estabilished (0x1d) ... Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-22Bluetooth: Add initial implementation of CIS connectionsLuiz Augusto von Dentz1-0/+440
This adds the initial implementation of CIS connections and introduces the ISO packets/links. == Central: Set CIG Parameters, create a CIS and Setup Data Path == > tools/isotest -s <address> < HCI Command: LE Extended Create... (0x08|0x0043) plen 26 ... > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) ... < HCI Command: LE Create Connected... (0x08|0x0064) plen 5 ... > HCI Event: Command Status (0x0f) plen 4 LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 == Peripheral: Accept CIS and Setup Data Path == > tools/isotest -d HCI Event: LE Meta Event (0x3e) plen 7 LE Connected Isochronous Stream Request (0x1a) ... < HCI Command: LE Accept Co.. (0x08|0x0066) plen 2 ... > HCI Event: LE Meta Event (0x3e) plen 29 LE Connected Isochronous Stream Established (0x19) ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 ... > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 257 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-21Bluetooth: Use bt_status to convert from errnoLuiz Augusto von Dentz1-1/+1
If a command cannot be sent or there is a internal error an errno maybe set instead of a command status. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-21Bluetooth: clear the temporary linkkey in hci_conn_cleanupAlain Michaud1-0/+3
If a hardware error occurs and the connections are flushed without a disconnection_complete event being signaled, the temporary linkkeys are not flushed. This change ensures that any outstanding flushable linkkeys are flushed when the connection are flushed from the hash table. Additionally, this also makes use of test_and_clear_bit to avoid multiple attempts to delete the link key that's already been flushed. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-05-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+3
drivers/net/ethernet/cadence/macb_main.c 5cebb40bc955 ("net: macb: Fix PTP one step sync support") 138badbc21a0 ("net: macb: use NAPI for TX completion path") https://lore.kernel.org/all/20220523111021.31489367@canb.auug.org.au/ net/smc/af_smc.c 75c1edf23b95 ("net/smc: postpone sk_refcnt increment in connect()") 3aba103006bc ("net/smc: align the connect behaviour with TCP") https://lore.kernel.org/all/20220524114408.4bf1af38@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-23Bluetooth: hci_conn: Fix hci_connect_le_syncLuiz Augusto von Dentz1-2/+3
The handling of connection failures shall be handled by the request completion callback as already done by hci_cs_le_create_conn, also make sure to use hci_conn_failed instead of hci_le_conn_failed as the later don't actually call hci_conn_del to cleanup. Link: https://github.com/bluez/bluez/issues/340 Fixes: 8e8b92ee60de5 ("Bluetooth: hci_sync: Add hci_le_create_conn_sync") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-05-13Bluetooth: HCI: Add HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN quirkLuiz Augusto von Dentz1-1/+1
This adds HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN quirk which can be used to mark HCI_Enhanced_Setup_Synchronous_Connection as broken even if its support command bit are set since some controller report it as supported but the command don't work properly with some configurations (e.g. BT_VOICE_TRANSPARENT/mSBC). Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-04-26Bluetooth: hci_sync: Cleanup hci_conn if it cannot be abortedLuiz Augusto von Dentz1-8/+24
This attempts to cleanup the hci_conn if it cannot be aborted as otherwise it would likely result in having the controller and host stack out of sync with respect to connection handle. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: call hci_le_conn_failed with hdev lock in hci_le_conn_failedNiels Dossche1-0/+2
hci_le_conn_failed function's documentation says that the caller must hold hdev->lock. The only callsite that does not hold that lock is hci_le_conn_failed. The other 3 callsites hold the hdev->lock very locally. The solution is to hold the lock during the call to hci_le_conn_failed. Fixes: 3c857757ef6e ("Bluetooth: Add directed advertising support through connect()") Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-24Bluetooth: hci_event: Ignore multiple conn complete eventsSoenke Huster1-0/+1
When one of the three connection complete events is received multiple times for the same handle, the device is registered multiple times which leads to memory corruptions. Therefore, consequent events for a single connection are ignored. The conn->state can hold different values, therefore HCI_CONN_HANDLE_UNSET is introduced to identify new connections. To make sure the events do not contain this or another invalid handle HCI_CONN_HANDLE_MAX and checks are introduced. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=215497 Signed-off-by: Soenke Huster <soenke.huster@eknoes.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-12-22Bluetooth: hci_sync: Add hci_le_create_conn_syncLuiz Augusto von Dentz1-291/+14
This adds hci_le_create_conn_sync and make hci_le_connect use it instead of queueing multiple commands which may conflict with the likes of hci_update_passive_scan which uses hci_cmd_sync_queue. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Rework hci_suspend_notifierLuiz Augusto von Dentz1-10/+0
This makes hci_suspend_notifier use the hci_*_sync which can be executed synchronously which is allowed in the suspend_notifier and simplifies a lot of the handling since the status of each command can be checked inline so no other work need to be scheduled thus can be performed without using of a state machine. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERYLuiz Augusto von Dentz1-2/+2
This make use of hci_cmd_sync_queue for MGMT_OP_START_DISCOVERY, MGMT_OP_START_SERVICE_DISCOVERY and MGMT_OP_STOP_DISCOVERY to use hci_cmd_sync_queue so they no longer depend on hdev->discov_update work to send any commands. Tested with: tools/mgmt-tester -s "Start Discovery" Test Summary ------------ Start Discovery - Not powered 1 Passed Start Discovery - Invalid parameters 1 Passed Start Discovery - Not supported 1 Passed Start Discovery - Success 1 Passed Start Discovery - Success 2 Passed Start Discovery - Power Off 1 Passed Start Discovery BREDR LE - (Ext Scan Enable) Passed Start Discovery LE - (Ext Scan Enable) Passed Start Discovery LE - (Ext Scan Param) Passed Start Discovery - (2m, Scan Param) Passed Start Discovery - (coded, Scan Param) Passed Start Discovery - (1m, 2m, coded, Scan Param) Passed LL Privacy - Start Discovery 1 (Disable RL) Passed LL Privacy - Start Discovery 2 (Disable RL) Passed Total: 14, Passed: 14 (100.0%), Failed: 0, Not Run: 0 tools/mgmt-tester -s "Start Service" Test Summary ------------ Start Service Discovery - Not powered 1 Passed Start Service Discovery - Invalid parameters 1 Passed Start Service Discovery - Not supported 1 Passed Start Service Discovery - Success 1 Passed Start Service Discovery - Success 2 Passed Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0 tools/mgmt-tester -s "Stop Discovery" Test Summary ------------ Stop Discovery - Success 1 Passed Stop Discovery - BR/EDR (Inquiry) Success 1 Passed Stop Discovery - Rejected 1 Passed Stop Discovery - Invalid parameters 1 Passed Stop Discovery - (Ext Scan Disable) Passed Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Rework background scanLuiz Augusto von Dentz1-3/+3
This replaces the use of hci_update_background_scan with hci_update_passive_scan which runs from cmd_work_sync and deal properly with resolving list when LL privacy is enabled. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-07Bluetooth: Add support for msbc coding formatKiran K1-0/+26
In Enhanced_Setup_Synchronous_Command, add support for msbc coding format Signed-off-by: Kiran K <kiran.k@intel.com> Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com> Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-09-07Bluetooth: Configure codec for HFP offload use caseKiran K1-0/+4
For HFP offload use case, codec needs to be configured before opening SCO connection. This patch sends HCI_CONFIGURE_DATA_PATH command to configure doec before opening SCO connection. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-09-07Bluetooth: Add support for HCI_Enhanced_Setup_Synchronous_Connection commandKiran K1-3/+102
< HCI Command: Enhanced Setup Synchronous Connection (0x01|0x003d) plen 59 Handle: 256 Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Packet type: 0x0380 3-EV3 may not be used 2-EV5 may not be used 3-EV5 may not be used Retransmission effort: Optimize for link quality (0x02) > HCI Event: Command Status (0x0f) plen 4 Enhanced Setup Synchronous Connection (0x01|0x003d) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 Status: Success (0x00) Handle: 257 Address: CC:98:8B:92:04:FD (SONY Visual Products Inc.) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x06 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) Signed-off-by: Kiran K <kiran.k@intel.com> Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com> Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-08-30Bluetooth: Fix using RPA when address has been resolvedLuiz Augusto von Dentz1-14/+19
When connecting to a device using an RPA if the address has been resolved by the controller (types 0x02 and 0x03) the identity address shall be used as the actual RPA in the advertisement won't be visible to the host. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language in HCI role commentsArchie Pusaka1-4/+4
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced: master -> initiator (for smp) or central (everything else) slave -> responder (for smp) or peripheral (everything else) The #define preprocessor terms are unchanged for now to not disturb dependent APIs. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language to describe CPBArchie Pusaka1-1/+1
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced when describing the connectionless peripheral broadcast feature: master -> central slave -> peripheral Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-02Bluetooth: Fix spelling mistakesZheng Yongjun1-1/+1
Fix some spelling mistakes in comments: udpate ==> update retreive ==> retrieve accidentially ==> accidentally correspondig ==> corresponding adddress ==> address estabilish ==> establish commplete ==> complete Unkown ==> Unknown triggerd ==> triggered transtion ==> transition Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16Bluetooth: avoid deadlock between hci_dev->lock and socket lockJiri Kosina1-4/+0
Commit eab2404ba798 ("Bluetooth: Add BT_PHY socket option") added a dependency between socket lock and hci_dev->lock that could lead to deadlock. It turns out that hci_conn_get_phy() is not in any way relying on hdev being immutable during the runtime of this function, neither does it even look at any of the members of hdev, and as such there is no need to hold that lock. This fixes the lockdep splat below: ====================================================== WARNING: possible circular locking dependency detected 5.12.0-rc1-00026-g73d464503354 #10 Not tainted ------------------------------------------------------ bluetoothd/1118 is trying to acquire lock: ffff8f078383c078 (&hdev->lock){+.+.}-{3:3}, at: hci_conn_get_phy+0x1c/0x150 [bluetooth] but task is already holding lock: ffff8f07e831d920 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}, at: l2cap_sock_getsockopt+0x8b/0x610 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}: lock_sock_nested+0x72/0xa0 l2cap_sock_ready_cb+0x18/0x70 [bluetooth] l2cap_config_rsp+0x27a/0x520 [bluetooth] l2cap_sig_channel+0x658/0x1330 [bluetooth] l2cap_recv_frame+0x1ba/0x310 [bluetooth] hci_rx_work+0x1cc/0x640 [bluetooth] process_one_work+0x244/0x5f0 worker_thread+0x3c/0x380 kthread+0x13e/0x160 ret_from_fork+0x22/0x30 -> #2 (&chan->lock#2/1){+.+.}-{3:3}: __mutex_lock+0xa3/0xa10 l2cap_chan_connect+0x33a/0x940 [bluetooth] l2cap_sock_connect+0x141/0x2a0 [bluetooth] __sys_connect+0x9b/0xc0 __x64_sys_connect+0x16/0x20 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #1 (&conn->chan_lock){+.+.}-{3:3}: __mutex_lock+0xa3/0xa10 l2cap_chan_connect+0x322/0x940 [bluetooth] l2cap_sock_connect+0x141/0x2a0 [bluetooth] __sys_connect+0x9b/0xc0 __x64_sys_connect+0x16/0x20 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (&hdev->lock){+.+.}-{3:3}: __lock_acquire+0x147a/0x1a50 lock_acquire+0x277/0x3d0 __mutex_lock+0xa3/0xa10 hci_conn_get_phy+0x1c/0x150 [bluetooth] l2cap_sock_getsockopt+0x5a9/0x610 [bluetooth] __sys_getsockopt+0xcc/0x200 __x64_sys_getsockopt+0x20/0x30 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: &hdev->lock --> &chan->lock#2/1 --> sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); lock(&chan->lock#2/1); lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); lock(&hdev->lock); *** DEADLOCK *** 1 lock held by bluetoothd/1118: #0: ffff8f07e831d920 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}, at: l2cap_sock_getsockopt+0x8b/0x610 [bluetooth] stack backtrace: CPU: 3 PID: 1118 Comm: bluetoothd Not tainted 5.12.0-rc1-00026-g73d464503354 #10 Hardware name: LENOVO 20K5S22R00/20K5S22R00, BIOS R0IET38W (1.16 ) 05/31/2017 Call Trace: dump_stack+0x7f/0xa1 check_noncircular+0x105/0x120 ? __lock_acquire+0x147a/0x1a50 __lock_acquire+0x147a/0x1a50 lock_acquire+0x277/0x3d0 ? hci_conn_get_phy+0x1c/0x150 [bluetooth] ? __lock_acquire+0x2e1/0x1a50 ? lock_is_held_type+0xb4/0x120 ? hci_conn_get_phy+0x1c/0x150 [bluetooth] __mutex_lock+0xa3/0xa10 ? hci_conn_get_phy+0x1c/0x150 [bluetooth] ? lock_acquire+0x277/0x3d0 ? mark_held_locks+0x49/0x70 ? mark_held_locks+0x49/0x70 ? hci_conn_get_phy+0x1c/0x150 [bluetooth] hci_conn_get_phy+0x1c/0x150 [bluetooth] l2cap_sock_getsockopt+0x5a9/0x610 [bluetooth] __sys_getsockopt+0xcc/0x200 __x64_sys_getsockopt+0x20/0x30 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fb73df33eee Code: 48 8b 0d 85 0f 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 37 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 52 0f 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007fffcfbbbf08 EFLAGS: 00000203 ORIG_RAX: 0000000000000037 RAX: ffffffffffffffda RBX: 0000000000000019 RCX: 00007fb73df33eee RDX: 000000000000000e RSI: 0000000000000112 RDI: 0000000000000018 RBP: 0000000000000000 R08: 00007fffcfbbbf44 R09: 0000000000000000 R10: 00007fffcfbbbf3c R11: 0000000000000203 R12: 0000000000000000 R13: 0000000000000018 R14: 0000000000000000 R15: 0000556fcefc70d0 Fixes: eab2404ba798 ("Bluetooth: Add BT_PHY socket option") Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-03-02Bluetooth: Notify suspend on le conn failedAbhishek Pandit-Subedi1-0/+10
When suspending, Bluetooth disconnects all connected peers devices. If an LE connection is started but isn't completed, we will see an LE Create Connection Cancel instead of an HCI disconnect. This just adds a check to see if an LE cancel was the last disconnected device and wake the suspend thread when that is the case. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Archie Pusaka <apusaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-02-01Bluetooth: Skip eSCO 2M params when not supportedYu Liu1-2/+18
If a peer device doesn't support eSCO 2M we should skip the params that use it when setting up sync connection since they will always fail. Signed-off-by: Yu Liu <yudiliu@google.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-12-18Bluetooth: Cancel Inquiry before Create ConnectionSonny Sasaka1-0/+17
Many controllers do not allow HCI Create Connection while it is doing Inquiry. This patch adds Inquiry Cancel before Create Connection in this case to allow the controller to do Create Connection. User space will be aware of this Inquiry cancellation and they may issue another discovery request afterwards. Sample Command Disallowed response of HCI Create Connection: < HCI Command: Inquiry (0x01|0x0001) plen 5 Access code: 0x9e8b33 (General Inquiry) Length: 10.24s (0x08) Num responses: 0 > HCI Event: Command Status (0x0f) plen 4 Inquiry (0x01|0x0001) ncmd 2 Status: Success (0x00) < HCI Command: Create Connection (0x01|0x0005) plen 13 Address: XX:XX:XX:XX:XX:XX Packet type: 0xcc18 Page scan repetition mode: R2 (0x02) Page scan mode: Mandatory (0x00) Clock offset: 0x0000 Role switch: Allow slave (0x01) > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) ncmd 1 Status: Success (0x00) > HCI Event: Connect Complete (0x03) plen 11 Status: Command Disallowed (0x0c) Handle: 65535 Address: XX:XX:XX:XX:XX:XX Link type: ACL (0x01) Encryption: Disabled (0x00) Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-11-09Bluetooth: Resume advertising after LE connectionDaniel Winkler1-2/+10
When an LE connection request is made, advertising is disabled and never resumed. When a client has an active advertisement, this is disruptive. This change adds resume logic for client-configured (non-directed) advertisements after the connection attempt. The patch was tested by registering an advertisement, initiating an LE connection from a remote peer, and verifying that the advertisement is re-activated after the connection is established. This is performed on Hatch and Kukui Chromebooks. Signed-off-by: Daniel Winkler <danielwinkler@google.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-18net: bluetooth: delete duplicated wordsRandy Dunlap1-1/+1
Drop repeated words in net/bluetooth/. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-30Bluetooth: Enable/Disable address resolution during le create connSathish Narasimman1-1/+6
In this patch if le_create_conn process is started restrict to disable address resolution and same is disabled during le_enh_connection_complete Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-15Bluetooth: Add per-instance adv disable/removeDaniel Winkler1-1/+1
Add functionality to disable and remove advertising instances, and use that functionality in MGMT add/remove advertising calls. Currently, advertising is globally-disabled, i.e. all instances are disabled together, even if hardware offloading is available. This patch adds functionality to disable and remove individual adv instances, solving two issues: 1. On new advertisement registration, a global disable was done, and then only the new instance was enabled. This meant only the newest instance was actually enabled. 2. On advertisement removal, the structure was removed, but the instance was never disabled or removed, which is incorrect with hardware offload support. Signed-off-by: Daniel Winkler <danielwinkler@google.com> Reviewed-by: Shyh-In Hwang <josephsih@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-22Bluetooth: Disconnect if E0 is used for Level 4Luiz Augusto von Dentz1-0/+17
E0 is not allowed with Level 4: BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 3, Part C page 1319: '128-bit equivalent strength for link and encryption keys required using FIPS approved algorithms (E0 not allowed, SAFER+ not allowed, and P-192 not allowed; encryption key not shortened' SC enabled: > HCI Event: Read Remote Extended Features (0x23) plen 13 Status: Success (0x00) Handle: 256 Page: 1/2 Features: 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Secure Simple Pairing (Host Support) LE Supported (Host) Secure Connections (Host Support) > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 256 Encryption: Enabled with AES-CCM (0x02) SC disabled: > HCI Event: Read Remote Extended Features (0x23) plen 13 Status: Success (0x00) Handle: 256 Page: 1/2 Features: 0x03 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Secure Simple Pairing (Host Support) LE Supported (Host) > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 256 Encryption: Enabled with E0 (0x01) [May 8 20:23] Bluetooth: hci0: Invalid security: expect AES but E0 was used < HCI Command: Disconnect (0x01|0x0006) plen 3 Handle: 256 Reason: Authentication Failure (0x05) Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-18Bluetooth: Terminate the link if pairing is cancelledManish Mandlik1-3/+8
If user decides to cancel the ongoing pairing process (e.g. by clicking the cancel button on pairing/passkey window), abort any ongoing pairing and then terminate the link if it was created because of the pair device action. Signed-off-by: Manish Mandlik <mmandlik@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-12Bluetooth: centralize default value initialization.Alain Michaud1-10/+4
This patch centralized the initialization of default parameters. This is required to allow clients to more easily customize the default system parameters. Signed-off-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-20Bluetooth: Fix assuming EIR flags can result in SSP authenticationLuiz Augusto von Dentz1-2/+0
EIR flags should just hint if SSP may be supported but we shall verify this with use of the actual features as the SSP bits may be disabled in the lower layers which would result in legacy authentication to be used. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-05Bluetooth: add support to notify using SCO air modeSathish Narsimman1-4/+21
notifying using HCI_NOTIFY_CONN_ADD for SCO connection is generic in case of mSBC audio. To differntiate SCO air mode introducing HCI_NOTIFY_ENABLE_SCO_CVSD and HCI_NOTIFY_ENABLE_SCO_TRANSP. Signed-off-by: Sathish Narsimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-02-28Bluetooth: During le_conn_timeout disable EXT_ADVSathish Narsimman1-3/+19
Disabling LE_LEGACY_ADV when LE_EXT_ADV is enabled causes 'command disallowed . This patch fixes that issue and disables EXT_ADV if enabled. Signed-off-by: Sathish Narsimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-02-28Bluetooth: Remove adv set for directed advertisingSathish Narsimman1-0/+10
Extended advertising Data is set during bluetooth initialization by default which causes InvalidHCICommandParameters when setting Extended advertising parameters. As per Core Spec 5.2 Vol 2, PART E, Sec 7.8.53, for advertising_event_property LE_LEGACY_ADV_DIRECT_IND does not supports advertising data when the advertising set already contains some, the controller shall return erroc code 'InvalidHCICommandParameters(0x12). So it is required to remove adv set for handle 0x00. since we use instance 0 for directed adv. Signed-off-by: Sathish Narsimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-02-18Bluetooth: Disable Extended Adv if enabledSathish Narsimman1-5/+2
Disabling LEGACY_ADV when EXT_ADV is enabled causes 'command disallowed' during DIRECTED_ADV. This Patch fixes this issue. Signed-off-by: Sathish Narsimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-02-14Bluetooth: Add BT_PHY socket optionLuiz Augusto von Dentz1-0/+107
This adds BT_PHY socket option (read-only) which can be used to read the PHYs in use by the underline connection. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-11-22Bluetooth: Fix memory leak in hci_connect_le_scanNavid Emamdoost1-1/+3
In the implementation of hci_connect_le_scan() when conn is added via hci_conn_add(), if hci_explicit_conn_params_set() fails the allocated memory for conn is leaked. Use hci_conn_del() to release it. Fixes: f75113a26008 ("Bluetooth: add hci_connect_le_scan") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-10-16Bluetooth: Workaround directed advertising bug in Broadcom controllersSzymon Janc1-0/+8
It appears that some Broadcom controllers (eg BCM20702A0) reject LE Set Advertising Parameters command if advertising intervals provided are not within range for undirected and low duty directed advertising. Workaround this bug by populating min and max intervals with 'valid' values. < HCI Command: LE Set Advertising Parameters (0x08|0x0006) plen 15 Min advertising interval: 0.000 msec (0x0000) Max advertising interval: 0.000 msec (0x0000) Type: Connectable directed - ADV_DIRECT_IND (high duty cycle) (0x01) Own address type: Public (0x00) Direct address type: Random (0x01) Direct address: E2:F0:7B:9F:DC:F4 (Static) Channel map: 37, 38, 39 (0x07) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) > HCI Event: Command Complete (0x0e) plen 4 LE Set Advertising Parameters (0x08|0x0006) ncmd 1 Status: Invalid HCI Command Parameters (0x12) Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Tested-by: Sören Beye <linux@hypfer.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: Use controller sets when availableLuiz Augusto von Dentz1-1/+1
This makes use of controller sets when using Extended Advertising feature thus offloading the scheduling to the controller. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: Add support for LE ping featureSpoorthi Ravishankar Koppad1-0/+3
Changes made to add HCI Write Authenticated Payload timeout command for LE Ping feature. As per the Core Specification 5.0 Volume 2 Part E Section 7.3.94, the following code changes implements HCI Write Authenticated Payload timeout command for LE Ping feature. Signed-off-by: Spoorthi Ravishankar Koppad <spoorthix.k@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-06-22Bluetooth: Fix regression with minimum encryption key size alignmentMarcel Holtmann1-9/+9
When trying to align the minimum encryption key size requirement for Bluetooth connections, it turns out doing this in a central location in the HCI connection handling code is not possible. Original Bluetooth version up to 2.0 used a security model where the L2CAP service would enforce authentication and encryption. Starting with Bluetooth 2.1 and Secure Simple Pairing that model has changed into that the connection initiator is responsible for providing an encrypted ACL link before any L2CAP communication can happen. Now connecting Bluetooth 2.1 or later devices with Bluetooth 2.0 and before devices are causing a regression. The encryption key size check needs to be moved out of the HCI connection handling into the L2CAP channel setup. To achieve this, the current check inside hci_conn_security() has been moved into l2cap_check_enc_key_size() helper function and then called from four decisions point inside L2CAP to cover all combinations of Secure Simple Pairing enabled devices and device using legacy pairing and legacy service security model. Fixes: d5bb334a8e17 ("Bluetooth: Align minimum encryption key size for LE and BR/EDR connections") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203643 Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-25Bluetooth: Align minimum encryption key size for LE and BR/EDR connectionsMarcel Holtmann1-0/+8
The minimum encryption key size for LE connections is 56 bits and to align LE with BR/EDR, enforce 56 bits of minimum encryption key size for BR/EDR connections as well. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org
2018-07-30Bluetooth: Implement Set ADV set random addressJaganath Kanakkassery1-0/+23
This basically sets the random address for the adv instance Random address can be set only if the instance is created which is done in Set ext adv param. Random address and rpa expire timer and flags have been added to adv instance which will be used when the respective instance is scheduled. This introduces a hci_get_random_address() which returns the own address type and random address (rpa or nrpa) based on the instance flags and hdev flags. New function is required since own address type should be known before setting adv params but address can be set only after setting params. < HCI Command: LE Set Advertising Set Random Address (0x08|0x0035) plen 7 Advertising handle: 0x00 Advertising random address: 3C:8E:56:9B:77:84 (OUI 3C-8E-56) > HCI Event: Command Complete (0x0e) plen 4 LE Set Advertising Set Random Address (0x08|0x0035) ncmd 1 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.