aboutsummaryrefslogtreecommitdiffstats
path: root/net/bridge/br_netlink.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-11-02bridge: Fix flushing of dynamic FDB entriesIdo Schimmel1-1/+1
The following commands should result in all the dynamic FDB entries being flushed, but instead all the non-local (non-permanent) entries are flushed: # bridge fdb add 00:aa:bb:cc:dd:ee dev dummy1 master static # bridge fdb add 00:11:22:33:44:55 dev dummy1 master dynamic # ip link set dev br0 type bridge fdb_flush # bridge fdb show brport dummy1 00:00:00:00:00:01 master br0 permanent 33:33:00:00:00:01 self permanent 01:00:5e:00:00:01 self permanent This is because br_fdb_flush() works with FDB flags and not the corresponding enumerator values. Fix by passing the FDB flag instead. After the fix: # bridge fdb add 00:aa:bb:cc:dd:ee dev dummy1 master static # bridge fdb add 00:11:22:33:44:55 dev dummy1 master dynamic # ip link set dev br0 type bridge fdb_flush # bridge fdb show brport dummy1 00:aa:bb:cc:dd:ee master br0 static 00:00:00:00:00:01 master br0 permanent 33:33:00:00:00:01 self permanent 01:00:5e:00:00:01 self permanent Fixes: 1f78ee14eeac ("net: bridge: fdb: add support for fine-grained flushing") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20221101185753.2120691-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+6
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26bridge: Do not send empty IFLA_AF_SPEC attributeBenjamin Poirier1-2/+6
After commit b6c02ef54913 ("bridge: Netlink interface fix."), br_fill_ifinfo() started to send an empty IFLA_AF_SPEC attribute when a bridge vlan dump is requested but an interface does not have any vlans configured. iproute2 ignores such an empty attribute since commit b262a9becbcb ("bridge: Fix output with empty vlan lists") but older iproute2 versions as well as other utilities have their output changed by the cited kernel commit, resulting in failed test cases. Regardless, emitting an empty attribute is pointless and inefficient. Avoid this change by canceling the attribute if no AF_SPEC data was added. Fixes: b6c02ef54913 ("bridge: Netlink interface fix.") Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20220725001236.95062-1-bpoirier@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-09net: adopt u64_stats_t in struct pcpu_sw_netstatsEric Dumazet1-4/+4
As explained in commit 316580b69d0a ("u64_stats: provide u64_stats_t type") we should use u64_stats_t and related accessors to avoid load/store tearing. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-13net: bridge: fdb: add support for fine-grained flushingNikolay Aleksandrov1-2/+7
Add the ability to specify exactly which fdbs to be flushed. They are described by a new structure - net_bridge_fdb_flush_desc. Currently it can match on port/bridge ifindex, vlan id and fdb flags. It is used to describe the existing dynamic fdb flush operation. Note that this flush operation doesn't treat permanent entries in a special way (fdb_delete vs fdb_delete_local), it will delete them regardless if any port is using them, so currently it can't directly replace deletes which need to handle that case, although we can extend it later for that too. Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-23net: bridge: mst: Restrict info size queries to bridge portsTobias Waldekranz1-1/+1
Ensure that no bridge masters are ever considered for MST info dumping. MST states are only supported on bridge ports, not bridge masters - which br_mst_info_size relies on. Fixes: 122c29486e1f ("net: bridge: mst: Support setting and reporting MST port states") Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Link: https://lore.kernel.org/r/20220322133001.16181-1-tobias@waldekranz.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-22net: bridge: mst: prevent NULL deref in br_mst_info_size()Eric Dumazet1-1/+1
Call br_mst_info_size() only if vg pointer is not NULL. general protection fault, probably for non-canonical address 0xdffffc0000000058: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x00000000000002c0-0x00000000000002c7] CPU: 0 PID: 975 Comm: syz-executor.0 Tainted: G W 5.17.0-next-20220321-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:br_mst_info_size+0x97/0x270 net/bridge/br_mst.c:242 Code: 00 00 31 c0 e8 ba 10 53 f9 31 c0 b9 40 00 00 00 4c 8d 6c 24 30 4c 89 ef f3 48 ab 48 8d 83 c0 02 00 00 48 89 04 24 48 c1 e8 03 <80> 3c 28 00 0f 85 ae 01 00 00 48 8b 83 c0 02 00 00 41 bf 04 00 00 RSP: 0018:ffffc900153770a8 EFLAGS: 00010202 RAX: 0000000000000058 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000040000 RSI: ffffffff88259876 RDI: ffffc900153772d8 RBP: dffffc0000000000 R08: 0000000000000000 R09: ffffffff8db68957 R10: ffffffff881f737b R11: 0000000000000000 R12: 0000000000000000 R13: ffffc900153770d8 R14: 00000000000002a0 R15: 00000000ffffffff FS: 00007f18bbb6f700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020001a80 CR3: 000000001a7d9000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 00000000000000d8 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> br_get_link_af_size_filtered+0x6e9/0xc00 net/bridge/br_netlink.c:123 rtnl_link_get_af_size net/core/rtnetlink.c:598 [inline] if_nlmsg_size+0x40c/0xa50 net/core/rtnetlink.c:1040 rtnl_calcit.isra.0+0x25f/0x460 net/core/rtnetlink.c:3780 rtnetlink_rcv_msg+0xa65/0xb80 net/core/rtnetlink.c:5937 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2496 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:725 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2413 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2496 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f18baa89049 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f18bbb6f168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f18bab9bf60 RCX: 00007f18baa89049 RDX: 0000000000000000 RSI: 0000000020001a80 RDI: 0000000000000004 RBP: 00007f18baae308d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffeedb2be2f R14: 00007f18bbb6f300 R15: 0000000000022000 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:br_mst_info_size+0x97/0x270 net/bridge/br_mst.c:242 Code: 00 00 31 c0 e8 ba 10 53 f9 31 c0 b9 40 00 00 00 4c 8d 6c 24 30 4c 89 ef f3 48 ab 48 8d 83 c0 02 00 00 48 89 04 24 48 c1 e8 03 <80> 3c 28 00 0f 85 ae 01 00 00 48 8b 83 c0 02 00 00 41 bf 04 00 00 RSP: 0018:ffffc900153770a8 EFLAGS: 00010202 RAX: 0000000000000058 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000040000 RSI: ffffffff88259876 RDI: ffffc900153772d8 RBP: dffffc0000000000 R08: 0000000000000000 R09: ffffffff8db68957 R10: ffffffff881f737b R11: 0000000000000000 R12: 0000000000000000 R13: ffffc900153770d8 R14: 00000000000002a0 R15: 00000000ffffffff FS: 00007f18bbb6f700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2ca22000 CR3: 000000001a7d9000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 00000000000000d8 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 122c29486e1f ("net: bridge: mst: Support setting and reporting MST port states") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tobias Waldekranz <tobias@waldekranz.com> Cc: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20220322012314.795187-1-eric.dumazet@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-17net: bridge: mst: Support setting and reporting MST port statesTobias Waldekranz1-1/+43
Make it possible to change the port state in a given MSTI by extending the bridge port netlink interface (RTM_SETLINK on PF_BRIDGE).The proposed iproute2 interface would be: bridge mst set dev <PORT> msti <MSTI> state <STATE> Current states in all applicable MSTIs can also be dumped via a corresponding RTM_GETLINK. The proposed iproute interface looks like this: $ bridge mst port msti vb1 0 state forwarding 100 state disabled vb2 0 state forwarding 100 state forwarding The preexisting per-VLAN states are still valid in the MST mode (although they are read-only), and can be queried as usual if one is interested in knowing a particular VLAN's state without having to care about the VID to MSTI mapping (in this example VLAN 20 and 30 are bound to MSTI 100): $ bridge -d vlan port vlan-id vb1 10 state forwarding mcast_router 1 20 state disabled mcast_router 1 30 state disabled mcast_router 1 40 state forwarding mcast_router 1 vb2 10 state forwarding mcast_router 1 20 state forwarding mcast_router 1 30 state forwarding mcast_router 1 40 state forwarding mcast_router 1 Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-23net: bridge: Add support for bridge port in locked modeHans Schultz1-1/+5
In a 802.1X scenario, clients connected to a bridge port shall not be allowed to have traffic forwarded until fully authenticated. A static fdb entry of the clients MAC address for the bridge port unlocks the client and allows bidirectional communication. This scenario is facilitated with setting the bridge port in locked mode, which is also supported by various switchcore chipsets. Signed-off-by: Hans Schultz <schultz.hans+netdev@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-29net: bridge: mcast: add and enforce startup query interval minimumNikolay Aleksandrov1-1/+1
As reported[1] if startup query interval is set too low in combination with large number of startup queries and we have multiple bridges or even a single bridge with multiple querier vlans configured we can crash the machine. Add a 1 second minimum which must be enforced by overwriting the value if set lower (i.e. without returning an error) to avoid breaking user-space. If that happens a log message is emitted to let the admin know that the startup interval has been set to the minimum. It doesn't make sense to make the startup interval lower than the normal query interval so use the same value of 1 second. The issue has been present since these intervals could be user-controlled. [1] https://lore.kernel.org/netdev/e8b9ce41-57b9-b6e2-a46a-ff9c791cf0ba@gmail.com/ Fixes: d902eee43f19 ("bridge: Add multicast count/interval sysfs entries") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-29net: bridge: mcast: add and enforce query interval minimumNikolay Aleksandrov1-1/+1
As reported[1] if query interval is set too low and we have multiple bridges or even a single bridge with multiple querier vlans configured we can crash the machine. Add a 1 second minimum which must be enforced by overwriting the value if set lower (i.e. without returning an error) to avoid breaking user-space. If that happens a log message is emitted to let the administrator know that the interval has been set to the minimum. The issue has been present since these intervals could be user-controlled. [1] https://lore.kernel.org/netdev/e8b9ce41-57b9-b6e2-a46a-ff9c791cf0ba@gmail.com/ Fixes: d902eee43f19 ("bridge: Add multicast count/interval sysfs entries") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-16net: make use of helper netif_is_bridge_master()Kyungrok Chung1-2/+2
Make use of netdev helper functions to improve code readability. Replace 'dev->priv_flags & IFF_EBRIDGE' with netif_is_bridge_master(dev). Signed-off-by: Kyungrok Chung <acadx0@gmail.com> Reviewed-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05net: bridge: fix under estimation in br_get_linkxstats_size()Eric Dumazet1-0/+1
Commit de1799667b00 ("net: bridge: add STP xstats") added an additional nla_reserve_64bit() in br_fill_linkxstats(), but forgot to update br_get_linkxstats_size() accordingly. This can trigger the following in rtnl_stats_get() WARN_ON(err == -EMSGSIZE); Fixes: de1799667b00 ("net: bridge: add STP xstats") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Nikolay Aleksandrov <nikolay@nvidia.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05net: bridge: use nla_total_size_64bit() in br_get_linkxstats_size()Eric Dumazet1-1/+1
bridge_fill_linkxstats() is using nla_reserve_64bit(). We must use nla_total_size_64bit() instead of nla_total_size() for corresponding data structure. Fixes: 1080ab95e3c7 ("net: bridge: add support for IGMP/MLD stats and export them via netlink") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Nikolay Aleksandrov <nikolay@nvidia.com> Cc: Vivien Didelot <vivien.didelot@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20net: bridge: mcast: br_multicast_set_port_router takes multicast context as argumentNikolay Aleksandrov1-1/+2
Change br_multicast_set_port_router to take port multicast context as its first argument so we can later use it to control port/vlan mcast router option. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-14net: bridge: mcast: dump ipv4 querier stateNikolay Aleksandrov1-1/+4
Add support for dumping global IPv4 querier state, we dump the state only if our own querier is enabled or there has been another external querier which has won the election. For the bridge global state we use a new attribute IFLA_BR_MCAST_QUERIER_STATE and embed the state inside. The structure is: [IFLA_BR_MCAST_QUERIER_STATE] `[BRIDGE_QUERIER_IP_ADDRESS] - ip address of the querier `[BRIDGE_QUERIER_IP_PORT] - bridge port ifindex where the querier was seen (set only if external querier) `[BRIDGE_QUERIER_IP_OTHER_TIMER] - other querier timeout Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-11net: bridge: vlan: add support for mcast router global optionNikolay Aleksandrov1-1/+2
Add support to change and retrieve global vlan multicast router state which is used for the bridge itself. We just need to pass multicast context to br_multicast_set_router instead of bridge device and the rest of the logic remains the same. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-11net: bridge: vlan: add support for mcast querier global optionNikolay Aleksandrov1-2/+3
Add support to change and retrieve global vlan multicast querier state. We just need to pass multicast context to br_multicast_set_querier instead of bridge device and the rest of the logic remains the same. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-11net: bridge: mcast: move querier state to the multicast contextNikolay Aleksandrov1-1/+1
We need to have the querier state per multicast context in order to have per-vlan control, so remove the internal option bit and move it to the multicast context. Also annotate the lockless reads of the new variable. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-11net: bridge: vlan: add support for mcast igmp/mld version global optionsNikolay Aleksandrov1-2/+4
Add support to change and retrieve global vlan IGMP/MLD versions. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net: bridge: multicast: factor out bridge multicast contextNikolay Aleksandrov1-19/+20
Factor out the bridge's global multicast context into a separate structure which will later be used for per-vlan global context. No functional changes intended. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net: bridge: multicast: factor out port multicast contextNikolay Aleksandrov1-1/+1
Factor out the port's multicast context into a separate structure which will later be shared for per-port,vlan context. No functional changes intended. We need the structure even if bridge multicast is not defined to pass down as pointer to forwarding functions. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-25net: bridge: remove redundant assignmentNigel Christian1-1/+0
The variable br is assigned a value that is not being read after exiting case IFLA_STATS_LINK_XSTATS_SLAVE. The assignment is redundant and can be removed. Addresses-Coverity ("Unused value") Signed-off-by: Nigel Christian <nigel.l.christian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-29bridge: Fix possible races between assigning rx_handler_data and setting IFF_BRIDGE_PORT bitZhang Zhengming1-2/+3
There is a crash in the function br_get_link_af_size_filtered, as the port_exists(dev) is true and the rx_handler_data of dev is NULL. But the rx_handler_data of dev is correct saved in vmcore. The oops looks something like: ... pc : br_get_link_af_size_filtered+0x28/0x1c8 [bridge] ... Call trace: br_get_link_af_size_filtered+0x28/0x1c8 [bridge] if_nlmsg_size+0x180/0x1b0 rtnl_calcit.isra.12+0xf8/0x148 rtnetlink_rcv_msg+0x334/0x370 netlink_rcv_skb+0x64/0x130 rtnetlink_rcv+0x28/0x38 netlink_unicast+0x1f0/0x250 netlink_sendmsg+0x310/0x378 sock_sendmsg+0x4c/0x70 __sys_sendto+0x120/0x150 __arm64_sys_sendto+0x30/0x40 el0_svc_common+0x78/0x130 el0_svc_handler+0x38/0x78 el0_svc+0x8/0xc In br_add_if(), we found there is no guarantee that assigning rx_handler_data to dev->rx_handler_data will before setting the IFF_BRIDGE_PORT bit of priv_flags. So there is a possible data competition: CPU 0: CPU 1: (RCU read lock) (RTNL lock) rtnl_calcit() br_add_slave() if_nlmsg_size() br_add_if() br_get_link_af_size_filtered() -> netdev_rx_handler_register ... // The order is not guaranteed ... -> dev->priv_flags |= IFF_BRIDGE_PORT; // The IFF_BRIDGE_PORT bit of priv_flags has been set -> if (br_port_exists(dev)) { // The dev->rx_handler_data has NOT been assigned -> p = br_port_get_rcu(dev); .... -> rcu_assign_pointer(dev->rx_handler_data, rx_handler_data); ... Fix it in br_get_link_af_size_filtered, using br_port_get_check_rcu() and checking the return value. Signed-off-by: Zhang Zhengming <zhangzhengming@huawei.com> Reviewed-by: Zhao Lei <zhaolei69@huawei.com> Reviewed-by: Wang Xiaogang <wangxiaogang3@huawei.com> Suggested-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14net: bridge: propagate error code and extack from br_mc_disabled_updateFlorian Fainelli1-1/+3
Some Ethernet switches might only be able to support disabling multicast snooping globally, which is an issue for example when several bridges span the same physical device and request contradictory settings. Propagate the return value of br_mc_disabled_update() such that this limitation is transmitted correctly to user-space. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-14net: bridge: propagate extack through switchdev_port_attr_setVladimir Oltean1-1/+1
The benefit is the ability to propagate errors from switchdev drivers for the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING and SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL attributes. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-14net: bridge: propagate extack through store_bridge_parmVladimir Oltean1-1/+1
The bridge sysfs interface stores parameters for the STP, VLAN, multicast etc subsystems using a predefined function prototype. Sometimes the underlying function being called supports a netlink extended ack message, and we ignore it. Let's expand the store_bridge_parm function prototype to include the extack, and just print it to console, but at least propagate it where applicable. Where not applicable, create a shim function in the br_sysfs_br.c file that discards the extra function argument. This patch allows us to propagate the extack argument to br_vlan_set_default_pvid, br_vlan_set_proto and br_vlan_filter_toggle, and from there, further up in br_changelink from br_netlink.c. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-14net: bridge: remove __br_vlan_filter_toggleVladimir Oltean1-1/+1
This function is identical with br_vlan_filter_toggle. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12net: bridge: don't print in br_switchdev_set_port_flagVladimir Oltean1-4/+5
For the netlink interface, propagate errors through extack rather than simply printing them to the console. For the sysfs interface, we still print to the console, but at least that's one layer higher than in switchdev, which also allows us to silently ignore the offloading of flags if that is ever needed in the future. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12net: bridge: offload all port flags at once in br_setportVladimir Oltean1-74/+35
If for example this command: ip link set swp0 type bridge_slave flood off mcast_flood off learning off succeeded at configuring BR_FLOOD and BR_MCAST_FLOOD but not at BR_LEARNING, there would be no attempt to revert the partial state in any way. Arguably, if the user changes more than one flag through the same netlink command, this one _should_ be all or nothing, which means it should be passed through switchdev as all or nothing. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-27net: bridge: multicast: make tracked EHT hosts limit configurableNikolay Aleksandrov1-1/+18
Add two new port attributes which make EHT hosts limit configurable and export the current number of tracked EHT hosts: - IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT: configure/retrieve current limit - IFLA_BRPORT_MCAST_EHT_HOSTS_CNT: current number of tracked hosts Setting IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT to 0 is currently not allowed. Note that we have to increase RTNL_SLAVE_MAX_TYPE to 38 minimum, I've increased it to 40 to have space for two more future entries. v2: move br_multicast_eht_set_hosts_limit() to br_multicast_eht.c, no functional change Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18net: bridge: check vlan with eth_type_vlan() methodMenglong Dong1-9/+3
Replace some checks for ETH_P_8021Q and ETH_P_8021AD with eth_type_vlan(). Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20210117080950.122761-1-dong.menglong@zte.com.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18net: bridge: replace struct br_vlan_stats with pcpu_sw_netstatsHeiner Kallweit1-1/+1
Struct br_vlan_stats duplicates pcpu_sw_netstats (apart from br_vlan_stats not defining an alignment requirement), therefore switch to using the latter one. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/04d25c3d-c5f6-3611-6d37-c2f40243dae2@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-29bridge: cfm: Netlink Notifications.Henrik Bjoernlund1-10/+63
This is the implementation of Netlink notifications out of CFM. Notifications are initiated whenever a state change happens in CFM. IFLA_BRIDGE_CFM: Points to the CFM information. IFLA_BRIDGE_CFM_MEP_STATUS_INFO: This indicate that the MEP instance status are following. IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO: This indicate that the peer MEP status are following. CFM nested attribute has the following attributes in next level. IFLA_BRIDGE_CFM_MEP_STATUS_INSTANCE: The MEP instance number of the delivered status. The type is NLA_U32. IFLA_BRIDGE_CFM_MEP_STATUS_OPCODE_UNEXP_SEEN: The MEP instance received CFM PDU with unexpected Opcode. The type is NLA_U32 (bool). IFLA_BRIDGE_CFM_MEP_STATUS_VERSION_UNEXP_SEEN: The MEP instance received CFM PDU with unexpected version. The type is NLA_U32 (bool). IFLA_BRIDGE_CFM_MEP_STATUS_RX_LEVEL_LOW_SEEN: The MEP instance received CCM PDU with MD level lower than configured level. This frame is discarded. The type is NLA_U32 (bool). IFLA_BRIDGE_CFM_CC_PEER_STATUS_INSTANCE: The MEP instance number of the delivered status. The type is NLA_U32. IFLA_BRIDGE_CFM_CC_PEER_STATUS_PEER_MEPID: The added Peer MEP ID of the delivered status. The type is NLA_U32. IFLA_BRIDGE_CFM_CC_PEER_STATUS_CCM_DEFECT: The CCM defect status. The type is NLA_U32 (bool). True means no CCM frame is received for 3.25 intervals. IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL. IFLA_BRIDGE_CFM_CC_PEER_STATUS_RDI: The last received CCM PDU RDI. The type is NLA_U32 (bool). IFLA_BRIDGE_CFM_CC_PEER_STATUS_PORT_TLV_VALUE: The last received CCM PDU Port Status TLV value field. The type is NLA_U8. IFLA_BRIDGE_CFM_CC_PEER_STATUS_IF_TLV_VALUE: The last received CCM PDU Interface Status TLV value field. The type is NLA_U8. IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEEN: A CCM frame has been received from Peer MEP. The type is NLA_U32 (bool). This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO. IFLA_BRIDGE_CFM_CC_PEER_STATUS_TLV_SEEN: A CCM frame with TLV has been received from Peer MEP. The type is NLA_U32 (bool). This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO. IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEQ_UNEXP_SEEN: A CCM frame with unexpected sequence number has been received from Peer MEP. The type is NLA_U32 (bool). When a sequence number is not one higher than previously received then it is unexpected. This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO. Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-29bridge: cfm: Netlink GET status Interface.Henrik Bjoernlund1-3/+13
This is the implementation of CFM netlink status get information interface. Add new nested netlink attributes. These attributes are used by the user space to get status information. GETLINK: Request filter RTEXT_FILTER_CFM_STATUS: Indicating that CFM status information must be delivered. IFLA_BRIDGE_CFM: Points to the CFM information. IFLA_BRIDGE_CFM_MEP_STATUS_INFO: This indicate that the MEP instance status are following. IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO: This indicate that the peer MEP status are following. CFM nested attribute has the following attributes in next level. GETLINK RTEXT_FILTER_CFM_STATUS: IFLA_BRIDGE_CFM_MEP_STATUS_INSTANCE: The MEP instance number of the delivered status. The type is u32. IFLA_BRIDGE_CFM_MEP_STATUS_OPCODE_UNEXP_SEEN: The MEP instance received CFM PDU with unexpected Opcode. The type is u32 (bool). IFLA_BRIDGE_CFM_MEP_STATUS_VERSION_UNEXP_SEEN: The MEP instance received CFM PDU with unexpected version. The type is u32 (bool). IFLA_BRIDGE_CFM_MEP_STATUS_RX_LEVEL_LOW_SEEN: The MEP instance received CCM PDU with MD level lower than configured level. This frame is discarded. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_PEER_STATUS_INSTANCE: The MEP instance number of the delivered status. The type is u32. IFLA_BRIDGE_CFM_CC_PEER_STATUS_PEER_MEPID: The added Peer MEP ID of the delivered status. The type is u32. IFLA_BRIDGE_CFM_CC_PEER_STATUS_CCM_DEFECT: The CCM defect status. The type is u32 (bool). True means no CCM frame is received for 3.25 intervals. IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL. IFLA_BRIDGE_CFM_CC_PEER_STATUS_RDI: The last received CCM PDU RDI. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_PEER_STATUS_PORT_TLV_VALUE: The last received CCM PDU Port Status TLV value field. The type is u8. IFLA_BRIDGE_CFM_CC_PEER_STATUS_IF_TLV_VALUE: The last received CCM PDU Interface Status TLV value field. The type is u8. IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEEN: A CCM frame has been received from Peer MEP. The type is u32 (bool). This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO. IFLA_BRIDGE_CFM_CC_PEER_STATUS_TLV_SEEN: A CCM frame with TLV has been received from Peer MEP. The type is u32 (bool). This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO. IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEQ_UNEXP_SEEN: A CCM frame with unexpected sequence number has been received from Peer MEP. The type is u32 (bool). When a sequence number is not one higher than previously received then it is unexpected. This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO. Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-29bridge: cfm: Netlink GET configuration Interface.Henrik Bjoernlund1-2/+27
This is the implementation of CFM netlink configuration get information interface. Add new nested netlink attributes. These attributes are used by the user space to get configuration information. GETLINK: Request filter RTEXT_FILTER_CFM_CONFIG: Indicating that CFM configuration information must be delivered. IFLA_BRIDGE_CFM: Points to the CFM information. IFLA_BRIDGE_CFM_MEP_CREATE_INFO: This indicate that MEP instance create parameters are following. IFLA_BRIDGE_CFM_MEP_CONFIG_INFO: This indicate that MEP instance config parameters are following. IFLA_BRIDGE_CFM_CC_CONFIG_INFO: This indicate that MEP instance CC functionality parameters are following. IFLA_BRIDGE_CFM_CC_RDI_INFO: This indicate that CC transmitted CCM PDU RDI parameters are following. IFLA_BRIDGE_CFM_CC_CCM_TX_INFO: This indicate that CC transmitted CCM PDU parameters are following. IFLA_BRIDGE_CFM_CC_PEER_MEP_INFO: This indicate that the added peer MEP IDs are following. CFM nested attribute has the following attributes in next level. GETLINK RTEXT_FILTER_CFM_CONFIG: IFLA_BRIDGE_CFM_MEP_CREATE_INSTANCE: The created MEP instance number. The type is u32. IFLA_BRIDGE_CFM_MEP_CREATE_DOMAIN: The created MEP domain. The type is u32 (br_cfm_domain). It must be BR_CFM_PORT. This means that CFM frames are transmitted and received directly on the port - untagged. Not in a VLAN. IFLA_BRIDGE_CFM_MEP_CREATE_DIRECTION: The created MEP direction. The type is u32 (br_cfm_mep_direction). It must be BR_CFM_MEP_DIRECTION_DOWN. This means that CFM frames are transmitted and received on the port. Not in the bridge. IFLA_BRIDGE_CFM_MEP_CREATE_IFINDEX: The created MEP residence port ifindex. The type is u32 (ifindex). IFLA_BRIDGE_CFM_MEP_DELETE_INSTANCE: The deleted MEP instance number. The type is u32. IFLA_BRIDGE_CFM_MEP_CONFIG_INSTANCE: The configured MEP instance number. The type is u32. IFLA_BRIDGE_CFM_MEP_CONFIG_UNICAST_MAC: The configured MEP unicast MAC address. The type is 6*u8 (array). This is used as SMAC in all transmitted CFM frames. IFLA_BRIDGE_CFM_MEP_CONFIG_MDLEVEL: The configured MEP unicast MD level. The type is u32. It must be in the range 1-7. No CFM frames are passing through this MEP on lower levels. IFLA_BRIDGE_CFM_MEP_CONFIG_MEPID: The configured MEP ID. The type is u32. It must be in the range 0-0x1FFF. This MEP ID is inserted in any transmitted CCM frame. IFLA_BRIDGE_CFM_CC_CONFIG_INSTANCE: The configured MEP instance number. The type is u32. IFLA_BRIDGE_CFM_CC_CONFIG_ENABLE: The Continuity Check (CC) functionality is enabled or disabled. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL: The CC expected receive interval of CCM frames. The type is u32 (br_cfm_ccm_interval). This is also the transmission interval of CCM frames when enabled. IFLA_BRIDGE_CFM_CC_CONFIG_EXP_MAID: The CC expected receive MAID in CCM frames. The type is CFM_MAID_LENGTH*u8. This is MAID is also inserted in transmitted CCM frames. IFLA_BRIDGE_CFM_CC_PEER_MEP_INSTANCE: The configured MEP instance number. The type is u32. IFLA_BRIDGE_CFM_CC_PEER_MEPID: The CC Peer MEP ID added. The type is u32. When a Peer MEP ID is added and CC is enabled it is expected to receive CCM frames from that Peer MEP. IFLA_BRIDGE_CFM_CC_RDI_INSTANCE: The configured MEP instance number. The type is u32. IFLA_BRIDGE_CFM_CC_RDI_RDI: The RDI that is inserted in transmitted CCM PDU. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_CCM_TX_INSTANCE: The configured MEP instance number. The type is u32. IFLA_BRIDGE_CFM_CC_CCM_TX_DMAC: The transmitted CCM frame destination MAC address. The type is 6*u8 (array). This is used as DMAC in all transmitted CFM frames. IFLA_BRIDGE_CFM_CC_CCM_TX_SEQ_NO_UPDATE: The transmitted CCM frame update (increment) of sequence number is enabled or disabled. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_CCM_TX_PERIOD: The period of time where CCM frame are transmitted. The type is u32. The time is given in seconds. SETLINK IFLA_BRIDGE_CFM_CC_CCM_TX must be done before timeout to keep transmission alive. When period is zero any ongoing CCM frame transmission will be stopped. IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV: The transmitted CCM frame update with Interface Status TLV is enabled or disabled. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV_VALUE: The transmitted Interface Status TLV value field. The type is u8. IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV: The transmitted CCM frame update with Port Status TLV is enabled or disabled. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV_VALUE: The transmitted Port Status TLV value field. The type is u8. Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-29bridge: cfm: Netlink SET configuration Interface.Henrik Bjoernlund1-0/+5
This is the implementation of CFM netlink configuration set information interface. Add new nested netlink attributes. These attributes are used by the user space to create/delete/configure CFM instances. SETLINK: IFLA_BRIDGE_CFM: Indicate that the following attributes are CFM. IFLA_BRIDGE_CFM_MEP_CREATE: This indicate that a MEP instance must be created. IFLA_BRIDGE_CFM_MEP_DELETE: This indicate that a MEP instance must be deleted. IFLA_BRIDGE_CFM_MEP_CONFIG: This indicate that a MEP instance must be configured. IFLA_BRIDGE_CFM_CC_CONFIG: This indicate that a MEP instance Continuity Check (CC) functionality must be configured. IFLA_BRIDGE_CFM_CC_PEER_MEP_ADD: This indicate that a CC Peer MEP must be added. IFLA_BRIDGE_CFM_CC_PEER_MEP_REMOVE: This indicate that a CC Peer MEP must be removed. IFLA_BRIDGE_CFM_CC_CCM_TX: This indicate that the CC transmitted CCM PDU must be configured. IFLA_BRIDGE_CFM_CC_RDI: This indicate that the CC transmitted CCM PDU RDI must be configured. CFM nested attribute has the following attributes in next level. SETLINK RTEXT_FILTER_CFM_CONFIG: IFLA_BRIDGE_CFM_MEP_CREATE_INSTANCE: The created MEP instance number. The type is u32. IFLA_BRIDGE_CFM_MEP_CREATE_DOMAIN: The created MEP domain. The type is u32 (br_cfm_domain). It must be BR_CFM_PORT. This means that CFM frames are transmitted and received directly on the port - untagged. Not in a VLAN. IFLA_BRIDGE_CFM_MEP_CREATE_DIRECTION: The created MEP direction. The type is u32 (br_cfm_mep_direction). It must be BR_CFM_MEP_DIRECTION_DOWN. This means that CFM frames are transmitted and received on the port. Not in the bridge. IFLA_BRIDGE_CFM_MEP_CREATE_IFINDEX: The created MEP residence port ifindex. The type is u32 (ifindex). IFLA_BRIDGE_CFM_MEP_DELETE_INSTANCE: The deleted MEP instance number. The type is u32. IFLA_BRIDGE_CFM_MEP_CONFIG_INSTANCE: The configured MEP instance number. The type is u32. IFLA_BRIDGE_CFM_MEP_CONFIG_UNICAST_MAC: The configured MEP unicast MAC address. The type is 6*u8 (array). This is used as SMAC in all transmitted CFM frames. IFLA_BRIDGE_CFM_MEP_CONFIG_MDLEVEL: The configured MEP unicast MD level. The type is u32. It must be in the range 1-7. No CFM frames are passing through this MEP on lower levels. IFLA_BRIDGE_CFM_MEP_CONFIG_MEPID: The configured MEP ID. The type is u32. It must be in the range 0-0x1FFF. This MEP ID is inserted in any transmitted CCM frame. IFLA_BRIDGE_CFM_CC_CONFIG_INSTANCE: The configured MEP instance number. The type is u32. IFLA_BRIDGE_CFM_CC_CONFIG_ENABLE: The Continuity Check (CC) functionality is enabled or disabled. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL: The CC expected receive interval of CCM frames. The type is u32 (br_cfm_ccm_interval). This is also the transmission interval of CCM frames when enabled. IFLA_BRIDGE_CFM_CC_CONFIG_EXP_MAID: The CC expected receive MAID in CCM frames. The type is CFM_MAID_LENGTH*u8. This is MAID is also inserted in transmitted CCM frames. IFLA_BRIDGE_CFM_CC_PEER_MEP_INSTANCE: The configured MEP instance number. The type is u32. IFLA_BRIDGE_CFM_CC_PEER_MEPID: The CC Peer MEP ID added. The type is u32. When a Peer MEP ID is added and CC is enabled it is expected to receive CCM frames from that Peer MEP. IFLA_BRIDGE_CFM_CC_RDI_INSTANCE: The configured MEP instance number. The type is u32. IFLA_BRIDGE_CFM_CC_RDI_RDI: The RDI that is inserted in transmitted CCM PDU. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_CCM_TX_INSTANCE: The configured MEP instance number. The type is u32. IFLA_BRIDGE_CFM_CC_CCM_TX_DMAC: The transmitted CCM frame destination MAC address. The type is 6*u8 (array). This is used as DMAC in all transmitted CFM frames. IFLA_BRIDGE_CFM_CC_CCM_TX_SEQ_NO_UPDATE: The transmitted CCM frame update (increment) of sequence number is enabled or disabled. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_CCM_TX_PERIOD: The period of time where CCM frame are transmitted. The type is u32. The time is given in seconds. SETLINK IFLA_BRIDGE_CFM_CC_CCM_TX must be done before timeout to keep transmission alive. When period is zero any ongoing CCM frame transmission will be stopped. IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV: The transmitted CCM frame update with Interface Status TLV is enabled or disabled. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV_VALUE: The transmitted Interface Status TLV value field. The type is u8. IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV: The transmitted CCM frame update with Port Status TLV is enabled or disabled. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV_VALUE: The transmitted Port Status TLV value field. The type is u8. Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-15/+11
Small conflict around locking in rxrpc_process_event() - channel_lock moved to bundle in next, while state lock needs _bh() from net. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-08bridge: Netlink interface fix.Henrik Bjoernlund1-15/+11
This commit is correcting NETLINK br_fill_ifinfo() to be able to handle 'filter_mask' with multiple flags asserted. Fixes: 36a8e8e265420 ("bridge: Extend br_fill_ifinfo to return MPR status") Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Suggested-by: Nikolay Aleksandrov <nikolay@nvidia.com> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-08-18netlink: consistently use NLA_POLICY_EXACT_LEN()Johannes Berg1-2/+2
Change places that open-code NLA_POLICY_EXACT_LEN() to use the macro instead, giving us flexibility in how we handle the details of the macro. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14net: bridge: Add port attribute IFLA_BRPORT_MRP_IN_OPENHoratiu Vultur1-0/+3
This patch adds a new port attribute, IFLA_BRPORT_MRP_IN_OPEN, which allows to notify the userspace when the node lost the contiuity of MRP_InTest frames. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02bridge: Extend br_fill_ifinfo to return MPR statusHoratiu Vultur1-1/+24
This patch extends the function br_fill_ifinfo to return also the MRP status for each instance on a bridge. It also adds a new filter RTEXT_FILTER_MRP to return the MRP status only when this is set, not to interfer with the vlans. The MRP status is return only on the bridge interfaces. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-0/+1
Conflicts were all overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30net: bridge: vlan: Add a schedule point during VLAN processingIdo Schimmel1-0/+1
User space can request to delete a range of VLANs from a bridge slave in one netlink request. For each deleted VLAN the FDB needs to be traversed in order to flush all the affected entries. If a large range of VLANs is deleted and the number of FDB entries is large or the FDB lock is contented, it is possible for the kernel to loop through the deleted VLANs for a long time. In case preemption is disabled, this can result in a soft lockup. Fix this by adding a schedule point after each VLAN is deleted to yield the CPU, if needed. This is safe because the VLANs are traversed in process context. Fixes: bdced7ef7838 ("bridge: support for multiple vlans and vlan ranges in setlink and dellink requests") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Stefan Priebe - Profihost AG <s.priebe@profihost.ag> Tested-by: Stefan Priebe - Profihost AG <s.priebe@profihost.ag> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-27net: bridge: Add checks for enabling the STP.Horatiu Vultur1-1/+3
It is not possible to have the MRP and STP running at the same time on the bridge, therefore add check when enabling the STP to check if MRP is already enabled. In that case return error. Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-27bridge: mrp: Integrate MRP into the bridgeHoratiu Vultur1-0/+5
To integrate MRP into the bridge, the bridge needs to do the following: - detect if the MRP frame was received on MRP ring port in that case it would be processed otherwise just forward it as usual. - enable parsing of MRP - before whenever the bridge was set up, it would set all the ports in forwarding state. Add an extra check to not set ports in forwarding state if the port is an MRP ring port. The reason of this change is that if the MRP instance initially sets the port in blocked state by setting the bridge up it would overwrite this setting. Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-27net: bridge: Add port attribute IFLA_BRPORT_MRP_RING_OPENHoratiu Vultur1-0/+3
This patch adds a new port attribute, IFLA_BRPORT_MRP_RING_OPEN, which allows to notify the userspace when the port lost the continuite of MRP frames. This attribute is set by kernel whenever the SW or HW detects that the ring is being open or closed. Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15net: bridge: vlan: notify on vlan add/delete/change flagsNikolay Aleksandrov1-3/+31
Now that we can notify, send a notification on add/del or change of flags. Notifications are also compressed when possible to reduce their number and relieve user-space of extra processing, due to that we have to manually notify after each add/del in order to avoid double notifications. We try hard to notify only about the vlans which actually changed, thus a single command can result in multiple notifications about disjoint ranges if there were vlans which didn't change inside. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15net: bridge: vlan: add new rtm message supportNikolay Aleksandrov1-6/+6
Add initial RTM_NEWVLAN support which can only create vlans, operating similar to the current br_afspec(). We will use it later to also change per-vlan options. Old-style (flag-based) vlan ranges are not allowed when using RTM messages, we will introduce vlan ranges later via a new nested attribute which would allow us to have all the information about a range encapsulated into a single nl attribute. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15net: bridge: vlan: add rtm definitions and dump supportNikolay Aleksandrov1-0/+2
This patch adds vlan rtm definitions: - NEWVLAN: to be used for creating vlans, setting options and notifications - DELVLAN: to be used for deleting vlans - GETVLAN: used for dumping vlan information Dumping vlans which can span multiple messages is added now with basic information (vid and flags). We use nlmsg_parse() to validate the header length in order to be able to extend the message with filtering attributes later. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.