aboutsummaryrefslogtreecommitdiffstats
path: root/net/dcb (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-03-03net: dcb: disable softirqs in dcbnl_flush_dev()Vladimir Oltean1-2/+2
Ido Schimmel points out that since commit 52cff74eef5d ("dcbnl : Disable software interrupts before taking dcb_lock"), the DCB API can be called by drivers from softirq context. One such in-tree example is the chelsio cxgb4 driver: dcb_rpl -> cxgb4_dcb_handle_fw_update -> dcb_ieee_setapp If the firmware for this driver happened to send an event which resulted in a call to dcb_ieee_setapp() at the exact same time as another DCB-enabled interface was unregistering on the same CPU, the softirq would deadlock, because the interrupted process was already holding the dcb_lock in dcbnl_flush_dev(). Fix this unlikely event by using spin_lock_bh() in dcbnl_flush_dev() as in the rest of the dcbnl code. Fixes: 91b0383fef06 ("net: dcb: flush lingering app table entries for unregistered devices") Reported-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220302193939.1368823-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-25net: dcb: flush lingering app table entries for unregistered devicesVladimir Oltean1-0/+44
If I'm not mistaken (and I don't think I am), the way in which the dcbnl_ops work is that drivers call dcb_ieee_setapp() and this populates the application table with dynamically allocated struct dcb_app_type entries that are kept in the module-global dcb_app_list. However, nobody keeps exact track of these entries, and although dcb_ieee_delapp() is supposed to remove them, nobody does so when the interface goes away (example: driver unbinds from device). So the dcb_app_list will contain lingering entries with an ifindex that no longer matches any device in dcb_app_lookup(). Reclaim the lost memory by listening for the NETDEV_UNREGISTER event and flushing the app table entries of interfaces that are now gone. In fact something like this used to be done as part of the initial commit (blamed below), but it was done in dcbnl_exit() -> dcb_flushapp(), essentially at module_exit time. That became dead code after commit 7a6b6f515f77 ("DCB: fix kconfig option") which essentially merged "tristate config DCB" and "bool config DCBNL" into a single "bool config DCB", so net/dcb/dcbnl.c could not be built as a module anymore. Commit 36b9ad8084bd ("net/dcb: make dcbnl.c explicitly non-modular") recognized this and deleted dcbnl_exit() and dcb_flushapp() altogether, leaving us with the version we have today. Since flushing application table entries can and should be done as soon as the netdevice disappears, fundamentally the commit that is to blame is the one that introduced the design of this API. Fixes: 9ab933ab2cc8 ("dcbnl: add appliction tlv handlers") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-01net: dcb: Return the correct errno codeZheng Yongjun1-2/+2
When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-18net: dcb: Remove unnecessary INIT_LIST_HEAD()Yang Yingliang1-2/+0
The list_head dcb_app_list is initialized statically. It is unnecessary to initialize by INIT_LIST_HEAD(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-27net: dcb: use obj-$(CONFIG_DCB) form in net/MakefileMasahiro Yamada1-1/+1
CONFIG_DCB is a bool option. Change the ifeq conditional to the standard obj-$(CONFIG_DCB) form. Use obj-y in net/dcb/Makefile because Kbuild visits this Makefile only when CONFIG_DCB=y. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20210125231659.106201-2-masahiroy@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12net: dcb: Accept RTM_GETDCB messages carrying set-like DCB commandsPetr Machata1-1/+1
In commit 826f328e2b7e ("net: dcb: Validate netlink message in DCB handler"), Linux started rejecting RTM_GETDCB netlink messages if they contained a set-like DCB_CMD_ command. The reason was that privileges were only verified for RTM_SETDCB messages, but the value that determined the action to be taken is the command, not the message type. And validation of message type against the DCB command was the obvious missing piece. Unfortunately it turns out that mlnx_qos, a somewhat widely deployed tool for configuration of DCB, accesses the DCB set-like APIs through RTM_GETDCB. Therefore do not bounce the discrepancy between message type and command. Instead, in addition to validating privileges based on the actual message type, validate them also based on the expected message type. This closes the loophole of allowing DCB configuration on non-admin accounts, while maintaining backward compatibility. Fixes: 2f90b8657ec9 ("ixgbe: this patch adds support for DCB to the kernel and ixgbe driver") Fixes: 826f328e2b7e ("net: dcb: Validate netlink message in DCB handler") Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/a3edcfda0825f2aa2591801c5232f2bbf2d8a554.1610384801.git.me@pmachata.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-23net: dcb: Validate netlink message in DCB handlerPetr Machata1-0/+2
DCB uses the same handler function for both RTM_GETDCB and RTM_SETDCB messages. dcb_doit() bounces RTM_SETDCB mesasges if the user does not have the CAP_NET_ADMIN capability. However, the operation to be performed is not decided from the DCB message type, but from the DCB command. Thus DCB_CMD_*_GET commands are used for reading DCB objects, the corresponding SET and DEL commands are used for manipulation. The assumption is that set-like commands will be sent via an RTM_SETDCB message, and get-like ones via RTM_GETDCB. However, this assumption is not enforced. It is therefore possible to manipulate DCB objects without CAP_NET_ADMIN capability by sending the corresponding command in an RTM_GETDCB message. That is a bug. Fix it by validating the type of the request message against the type used for the response. Fixes: 2f90b8657ec9 ("ixgbe: this patch adds support for DCB to the kernel and ixgbe driver") Signed-off-by: Petr Machata <me@pmachata.org> Link: https://lore.kernel.org/r/a2a9b88418f3a58ef211b718f2970128ef9e3793.1608673640.git.me@pmachata.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-30net: dcb: Fix kerneldoc warningsAndrew Lunn1-3/+13
net//dcb/dcbnl.c:1836: warning: Function parameter or member 'app' not described in 'dcb_getapp' net//dcb/dcbnl.c:1836: warning: Function parameter or member 'dev' not described in 'dcb_getapp' net//dcb/dcbnl.c:1858: warning: Function parameter or member 'dev' not described in 'dcb_setapp' net//dcb/dcbnl.c:1858: warning: Function parameter or member 'new' not described in 'dcb_setapp' net//dcb/dcbnl.c:1899: warning: Function parameter or member 'app' not described in 'dcb_ieee_getapp_mask' net//dcb/dcbnl.c:1899: warning: Function parameter or member 'dev' not described in 'dcb_ieee_getapp_mask' net//dcb/dcbnl.c:1922: warning: Function parameter or member 'dev' not described in 'dcb_ieee_setapp' net//dcb/dcbnl.c:1922: warning: Function parameter or member 'new' not described in 'dcb_ieee_setapp' net//dcb/dcbnl.c:1953: warning: Function parameter or member 'del' not described in 'dcb_ieee_delapp' net//dcb/dcbnl.c:1953: warning: Function parameter or member 'dev' not described in 'dcb_ieee_delapp' net//dcb/dcbnl.c:1986: warning: Function parameter or member 'dev' not described in 'dcb_ieee_getapp_prio_dscp_mask_map' net//dcb/dcbnl.c:1986: warning: Function parameter or member 'p_map' not described in 'dcb_ieee_getapp_prio_dscp_mask_map' net//dcb/dcbnl.c:2016: warning: Function parameter or member 'dev' not described in 'dcb_ieee_getapp_dscp_prio_mask_map' net//dcb/dcbnl.c:2016: warning: Function parameter or member 'p_map' not described in 'dcb_ieee_getapp_dscp_prio_mask_map' net//dcb/dcbnl.c:2045: warning: Function parameter or member 'dev' not described in 'dcb_ieee_getapp_default_prio_mask' For some of these warnings, change to comments to plain comments, since no attempt is being made to follow kerneldoc syntax. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201028010913.930929-1-andrew@lunn.ch Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-10net: DCB: Validate DCB_ATTR_DCB_BUFFER argumentPetr Machata1-0/+8
The parameter passed via DCB_ATTR_DCB_BUFFER is a struct dcbnl_buffer. The field prio2buffer is an array of IEEE_8021Q_MAX_PRIORITIES bytes, where each value is a number of a buffer to direct that priority's traffic to. That value is however never validated to lie within the bounds set by DCBX_MAX_BUFFERS. The only driver that currently implements the callback is mlx5 (maintainers CCd), and that does not do any validation either, in particual allowing incorrect configuration if the prio2buffer value does not fit into 4 bits. Instead of offloading the need to validate the buffer index to drivers, do it right there in core, and bounce the request if the value is too large. CC: Parav Pandit <parav@nvidia.com> CC: Saeed Mahameed <saeedm@nvidia.com> Fixes: e549f6f9c098 ("net/dcb: Add dcbnl buffer attribute") Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23dcb_doit: remove redundant skb checkGaurav Singh1-1/+1
skb cannot be NULL here since its already being accessed before: sock_net(skb->sk). Remove the redundant null check. Signed-off-by: Gaurav Singh <gaurav1086@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-1/+1
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201Thomas Gleixner2-24/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 228 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-27netlink: make validation more configurable for future strictnessJohannes Berg1-36/+54
We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27netlink: make nla_nest_start() add NLA_F_NESTED flagMichal Kubecek1-19/+21
Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-27net: dcb: Add priority-to-DSCP map gettersPetr Machata1-0/+86
On ingress, a network device such as a switch assigns to packets priority based on various criteria. Common options include interpreting PCP and DSCP fields according to user configuration. When a packet egresses the switch, a reverse process may rewrite PCP and/or DSCP values according to packet priority. The following three functions support a) obtaining a DSCP-to-priority map or vice versa, and b) finding default-priority entries in APP database. The DCB subsystem supports for APP entries a very generous M:N mapping between priorities and protocol identifiers. Understandably, several (say) DSCP values can map to the same priority. But this asymmetry holds the other way around as well--one priority can map to several DSCP values. For this reason, the following functions operate in terms of bitmaps, with ones in positions that match some APP entry. - dcb_ieee_getapp_dscp_prio_mask_map() to compute for a given netdevice a map of DSCP-to-priority-mask, which gives for each DSCP value a bitmap of priorities related to that DSCP value by APP, along the lines of dcb_ieee_getapp_mask(). - dcb_ieee_getapp_prio_dscp_mask_map() similarly to compute for a given netdevice a map from priorities to a bitmap of DSCPs. - dcb_ieee_getapp_default_prio_mask() which finds all default-priority rules for a given port in APP database, and returns a mask of priorities allowed by these default-priority rules. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-27net: dcb: For wild-card lookups, use priority -1, not 0Petr Machata1-4/+7
The function dcb_app_lookup walks the list of specified DCB APP entries, looking for one that matches a given criteria: ifindex, selector, protocol ID and optionally also priority. The "don't care" value for priority is set to 0, because that priority has not been allowed under CEE regime, which predates the IEEE standardization. Under IEEE, 0 is a valid priority number. But because dcb_app_lookup considers zero a wild card, attempts to add an APP entry with priority 0 fail when other entries exist for a given ifindex / selector / PID triplet. Fix by changing the wild-card value to -1. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-1/+2
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-24net/dcb: Add dcbnl buffer attributeHuy Nguyen1-0/+20
In this patch, we add dcbnl buffer attribute to allow user change the NIC's buffer configuration such as priority to buffer mapping and buffer size of individual buffer. This attribute combined with pfc attribute allows advanced user to fine tune the qos setting for specific priority queue. For example, user can give dedicated buffer for one or more priorities or user can give large buffer to certain priorities. The dcb buffer configuration will be controlled by lldptool. lldptool -T -i eth2 -V BUFFER prio 0,2,5,7,1,2,3,6 maps priorities 0,1,2,3,4,5,6,7 to receive buffer 0,2,5,7,1,2,3,6 lldptool -T -i eth2 -V BUFFER size 87296,87296,0,87296,0,0,0,0 sets receive buffer size for buffer 0,1,2,3,4,5,6,7 respectively After discussion on mailing list with Jakub, Jiri, Ido and John, we agreed to choose dcbnl over devlink interface since this feature is intended to set port attributes which are governed by the netdev instance of that port, where devlink API is more suitable for global ASIC configurations. We present an use case scenario where dcbnl buffer attribute configured by advance user helps reduce the latency of messages of different sizes. Scenarios description: On ConnectX-5, we run latency sensitive traffic with small/medium message sizes ranging from 64B to 256KB and bandwidth sensitive traffic with large messages sizes 512KB and 1MB. We group small, medium, and large message sizes to their own pfc enables priorities as follow. Priorities 1 & 2 (64B, 256B and 1KB) Priorities 3 & 4 (4KB, 8KB, 16KB, 64KB, 128KB and 256KB) Priorities 5 & 6 (512KB and 1MB) By default, ConnectX-5 maps all pfc enabled priorities to a single lossless fixed buffer size of 50% of total available buffer space. The other 50% is assigned to lossy buffer. Using dcbnl buffer attribute, we create three equal size lossless buffers. Each buffer has 25% of total available buffer space. Thus, the lossy buffer size reduces to 25%. Priority to lossless buffer mappings are set as follow. Priorities 1 & 2 on lossless buffer #1 Priorities 3 & 4 on lossless buffer #2 Priorities 5 & 6 on lossless buffer #3 We observe improvements in latency for small and medium message sizes as follows. Please note that the large message sizes bandwidth performance is reduced but the total bandwidth remains the same. 256B message size (42 % latency reduction) 4K message size (21% latency reduction) 64K message size (16% latency reduction) CC: Ido Schimmel <idosch@idosch.org> CC: Jakub Kicinski <jakub.kicinski@netronome.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Or Gerlitz <gerlitz.or@gmail.com> CC: Parav Pandit <parav@mellanox.com> CC: Aron Silverton <aron.silverton@oracle.com> Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-09rtnetlink: make rtnl_register accept a flags parameterFlorian Westphal1-2/+2
This change allows us to later indicate to rtnetlink core that certain doit functions should be called without acquiring rtnl_mutex. This change should have no effect, we simply replace the last (now unused) calcit argument with the new flag. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21dcb: enforce minimum length on IEEE_APPS attributestephen hemminger1-4/+7
Found by reviewing the warning about unused policy table. The code implies that it meant to check for size, but since it unrolled the loop for attribute validation that is never used. Instead do explicit check for attribute. Compile tested only. Needs review by original author. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: rtnetlink: plumb extended ack to doit functionDavid Ahern1-2/+3
Add netlink_ext_ack arg to rtnl_doit_func. Pass extack arg to nlmsg_parse for doit functions that call it directly. This is the first step to using extended error reporting in rtnetlink. >From here individual subsystems can be updated to set netlink_ext_ack as needed. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13netlink: pass extended ACK struct to parsing functionsJohannes Berg1-30/+27
Pass the new extended ACK reporting struct to all of the generic netlink parsing functions. For now, pass NULL in almost all callers (except for some in the core.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03net: dcb: set error code on failuresPan Bian1-0/+1
In function dcbnl_cee_fill(), returns the value of variable err on errors. However, on some error paths (e.g. nla put fails), its value may be 0. It may be better to explicitly set a negative errno to variable err before returning. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188881 Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/dcb: make dcbnl.c explicitly non-modularPaul Gortmaker1-27/+3
The Kconfig currently controlling compilation of this code is: net/dcb/Kconfig:config DCB net/dcb/Kconfig: bool "Data Center Bridging support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We can change to one of the other priority initcalls (subsys?) at any later date, if desired. We also delete the MODULE_LICENSE tag etc. since all that information is (or is now) already contained at the top of the file in the comments. Cc: "David S. Miller" <davem@davemloft.net> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Anish Bhatt <anish@chelsio.com> Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Shani Michaeli <shanim@mellanox.com> Cc: netdev@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-06net/dcb: Add IEEE QCN attributeShani Michaeli1-3/+41
As specified in 802.1Qau spec. Add this optional attribute to the DCB netlink layer. To allow for application to use the new attribute, NIC drivers should implement and register the callbacks ieee_getqcn, ieee_setqcn and ieee_getqcnstats. The QCN attribute holds a set of parameters for management, and a set of statistics to provide informative data on Congestion-Control defined by this spec. Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-16dcbnl : Disable software interrupts before taking dcb_lockAnish Bhatt1-18/+18
Solves possible lockup issues that can be seen from firmware DCB agents calling into the DCB app api. DCB firmware event queues can be tied in with NAPI so that dcb events are generated in softIRQ context. This can results in calls to dcb_*app() functions which try to take the dcb_lock. If the the event triggers while we also have the dcb_lock because lldpad or some other agent happened to be issuing a get/set command we could see a cpu lockup. This code was not originally written with firmware agents in mind, hence grabbing dcb_lock from softIRQ context was not considered. Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-30dcbnl : Fix misleading dcb_app->priority explanationAnish Bhatt1-2/+3
Current explanation of dcb_app->priority is wrong. It says priority is expected to be a 3-bit unsigned integer which is only true when working with DCBx-IEEE. Use of dcb_app->priority by DCBx-CEE expects it to be 802.1p user priority bitmap. Updated accordingly This affects the cxgb4 driver, but I will post those changes as part of a larger changeset shortly. Fixes: 3e29027af4372 ("dcbnl: add support for ieee8021Qaz attributes") Signed-off-by: Anish Bhatt <anish@chelsio.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17Update setapp/getapp prototypes in dcbnl_rtnl_ops to return int instead of u8Anish Bhatt1-1/+7
v2: fixed issue with checking return of dcbnl_rtnl_ops->getapp() Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-24net: Use netlink_ns_capable to verify the permisions of netlink messagesEric W. Biederman1-1/+1
It is possible by passing a netlink socket to a more privileged executable and then to fool that executable into writing to the socket data that happens to be valid netlink message to do something that privileged executable did not intend to do. To keep this from happening replace bare capable and ns_capable calls with netlink_capable, netlink_net_calls and netlink_ns_capable calls. Which act the same as the previous calls except they verify that the opener of the socket had the desired permissions as well. Reported-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14dcb: use __dev_get_by_name instead of dev_get_by_name to find interfaceYing Xue1-10/+5
The following call chain indicates that dcb_doit() is protected under rtnl_lock. So if we use __dev_get_by_name() instead of dev_get_by_name() to find interface handlers in it, this would help us avoid to change interface reference counter. rtnetlink_rcv() rtnl_lock() netlink_rcv_skb() dcb_doit() rtnl_unlock() Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06net/*: Fix FSF address in file headersJeff Kirsher2-4/+2
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: John Fastabend <john.r.fastabend@intel.com> CC: Alex Duyck <alexander.h.duyck@intel.com> CC: Marcel Holtmann <marcel@holtmann.org> CC: Gustavo Padovan <gustavo@padovan.org> CC: Johan Hedberg <johan.hedberg@gmail.com> CC: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-22rtnetlink: Remove passing of attributes into rtnl_doit functionsThomas Graf1-1/+1
With decnet converted, we can finally get rid of rta_buf and its computations around it. It also gets rid of the minimal header length verification since all message handlers do that explicitly anyway. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+8
Conflicts: drivers/net/ethernet/intel/e1000e/netdev.c Minor conflict in e1000e, a line that got fixed in 'net' has been removed in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-10dcbnl: fix various netlink info leaksMathias Krause1-0/+8
The dcb netlink interface leaks stack memory in various places: * perm_addr[] buffer is only filled at max with 12 of the 32 bytes but copied completely, * no in-kernel driver fills all fields of an IEEE 802.1Qaz subcommand, so we're leaking up to 58 bytes for ieee_ets structs, up to 136 bytes for ieee_pfc structs, etc., * the same is true for CEE -- no in-kernel driver fills the whole struct, Prevent all of the above stack info leaks by properly initializing the buffers/structures involved. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-09dcb: fix sparse warningsstephen hemminger1-0/+1
Add header with function definitions to quiet warnings and avoid future errors. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-10net: Allow DCBnl to use other namespaces besides init_netJohn Fastabend1-5/+2
Allow DCB and net namespace to work together. This is useful if you have containers that are bound to 'phys' interfaces that want to also manage their DCB attributes. The net namespace is taken from sock_net(skb->sk) of the netlink skb. CC: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-18net: Push capable(CAP_NET_ADMIN) into the rtnl methodsEric W. Biederman1-0/+3
- In rtnetlink_rcv_msg convert the capable(CAP_NET_ADMIN) check to ns_capable(net->user-ns, CAP_NET_ADMIN). Allowing unprivileged users to make netlink calls to modify their local network namespace. - In the rtnetlink doit methods add capable(CAP_NET_ADMIN) so that calls that are not safe for unprivileged users are still protected. Later patches will remove the extra capable calls from methods that are safe for unprivilged users. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-10netlink: Rename pid to portid to avoid confusionEric W. Biederman1-9/+9
It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10net: Fix non-kernel-doc comments with kernel-doc start markerBen Hutchings1-2/+1
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-21net: dcb: fix small regression in __dcbnl_pg_setcfg()John Fastabend1-2/+1
A small regression was introduced in the reply command of dcbnl_pg_setcfg(). User space apps may be expecting the DCB_ATTR_PG_CFG attribute to be returned with the patch below TX or RX variants are returned. commit 7be994138b188387691322921c08e19bddf6d3c5 Author: Thomas Graf <tgraf@suug.ch> Date: Wed Jun 13 02:54:55 2012 +0000 dcbnl: Shorten all command handling functions This patch reverts this behavior and returns DCB_ATTR_PG_CFG Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-14dcbnl: Use BUG_ON() instead of BUG()Thomas Graf1-4/+1
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-14dcbnl: Silence harmless gcc warning about uninitialized reply_nlhThomas Graf1-1/+1
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-13dcbnl: Use type safe nlmsg_data()Thomas Graf1-1/+1
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-13dcbnl: Move dcb app allocation into dcb_app_add()Thomas Graf1-25/+22
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-13dcbnl: Move dcb app lookup code into dcb_app_lookup()Thomas Graf1-46/+35
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-13dcbnl: Return consistent error codesThomas Graf1-135/+138
EMSGSIZE - ran out of space while constructing message EOPNOTSUPP - driver/hardware does not support operation ENODEV - network device not found EINVAL - invalid message Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-13dcbnl: Use dcbnl_newmsg() where possibleThomas Graf1-14/+2
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-13dcbnl: Remove now unused dcbnl_reply()Thomas Graf1-37/+0
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-13dcbnl: Shorten all command handling functionsThomas Graf1-550/+172
Allocating and sending the skb in dcb_doit() allows for much shorter and cleaner command handling functions. The huge switch statement is replaced with an array based definition of the handling function and reply message type. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.