aboutsummaryrefslogtreecommitdiffstats
path: root/net/hsr/hsr_main.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-03-02flow_dissector: Add support for HSRKurt Kanzenbach1-16/+0
Network drivers such as igb or igc call eth_get_headlen() to determine the header length for their to be constructed skbs in receive path. When running HSR on top of these drivers, it results in triggering BUG_ON() in skb_pull(). The reason is the skb headlen is not sufficient for HSR to work correctly. skb_pull() notices that. For instance, eth_get_headlen() returns 14 bytes for TCP traffic over HSR which is not correct. The problem is, the flow dissection code does not take HSR into account. Therefore, add support for it. Reported-by: Anthony Harivel <anthony.harivel@linutronix.de> Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Link: https://lore.kernel.org/r/20220228195856.88187-1-kurt@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-06net: hsr: use hlist_head instead of list_head for mac addressesJuhee Kang1-2/+7
Currently, HSR manages mac addresses of known HSR nodes by using list_head. It takes a lot of time when there are a lot of registered nodes due to finding specific mac address nodes by using linear search. We can be reducing the time by using hlist. Thus, this patch moves list_head to hlist_head for mac addresses and this allows for further improvement of network performance. Condition: registered 10,000 known HSR nodes Before: # iperf3 -c 192.168.10.1 -i 1 -t 10 Connecting to host 192.168.10.1, port 5201 [ 5] local 192.168.10.2 port 59442 connected to 192.168.10.1 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.49 sec 3.75 MBytes 21.1 Mbits/sec 0 158 KBytes [ 5] 1.49-2.05 sec 1.25 MBytes 18.7 Mbits/sec 0 166 KBytes [ 5] 2.05-3.06 sec 2.44 MBytes 20.3 Mbits/sec 56 16.9 KBytes [ 5] 3.06-4.08 sec 1.43 MBytes 11.7 Mbits/sec 11 38.0 KBytes [ 5] 4.08-5.00 sec 951 KBytes 8.49 Mbits/sec 0 56.3 KBytes After: # iperf3 -c 192.168.10.1 -i 1 -t 10 Connecting to host 192.168.10.1, port 5201 [ 5] local 192.168.10.2 port 36460 connected to 192.168.10.1 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 7.39 MBytes 62.0 Mbits/sec 3 130 KBytes [ 5] 1.00-2.00 sec 5.06 MBytes 42.4 Mbits/sec 16 113 KBytes [ 5] 2.00-3.00 sec 8.58 MBytes 72.0 Mbits/sec 42 94.3 KBytes [ 5] 3.00-4.00 sec 7.44 MBytes 62.4 Mbits/sec 2 131 KBytes [ 5] 4.00-5.07 sec 8.13 MBytes 63.5 Mbits/sec 38 92.9 KBytes Signed-off-by: Juhee Kang <claudiajkang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-27hsr: remove get_prp_lan_id()Jakub Kicinski1-5/+0
get_prp_lan_id() has never been used. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26net: hsr: Add support for redbox supervision framesAndreas Oetken1-5/+11
added support for the redbox supervision frames as defined in the IEC-62439-3:2018. Signed-off-by: Andreas Oetken <andreas.oetken@siemens-energy.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: hsr: fix mac_len checksGeorge McCollister1-2/+2
Commit 2e9f60932a2c ("net: hsr: check skb can contain struct hsr_ethhdr in fill_frame_info") added the following which resulted in -EINVAL always being returned: if (skb->mac_len < sizeof(struct hsr_ethhdr)) return -EINVAL; mac_len was not being set correctly so this check completely broke HSR/PRP since it was always 14, not 20. Set mac_len correctly and modify the mac_len checks to test in the correct places since sometimes it is legitimately 14. Fixes: 2e9f60932a2c ("net: hsr: check skb can contain struct hsr_ethhdr in fill_frame_info") Signed-off-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-25net: hsr: add support for EntryForgetTimeMarco Wenzel1-0/+1
In IEC 62439-3 EntryForgetTime is defined with a value of 400 ms. When a node does not send any frame within this time, the sequence number check for can be ignored. This solves communication issues with Cisco IE 2000 in Redbox mode. Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Marco Wenzel <marco.wenzel@a-eberle.de> Reviewed-by: George McCollister <george.mccollister@gmail.com> Tested-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210224094653.1440-1-marco.wenzel@a-eberle.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-11net: hsr: add offloading supportGeorge McCollister1-7/+1
Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion tag removal, duplicate generation and forwarding. For HSR, insertion involves the switch adding a 6 byte HSR header after the 14 byte Ethernet header. For PRP it adds a 6 byte trailer. Tag removal involves automatically stripping the HSR/PRP header/trailer in the switch. This is possible when the switch also performs auto deduplication using the HSR/PRP header/trailer (making it no longer required). Forwarding involves automatically forwarding between redundant ports in an HSR. This is crucial because delay is accumulated as a frame passes through each node in the ring. Duplication involves the switch automatically sending a single frame from the CPU port to both redundant ports. This is required because the inserted HSR/PRP header/trailer must contain the same sequence number on the frames sent out both redundant ports. Export is_hsr_master so DSA can tell them apart from other devices in dsa_slave_changeupper. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-02net: hsr: align sup_multicast_addr in struct hsr_priv to u16 boundaryAndreas Oetken1-1/+4
sup_multicast_addr is passed to ether_addr_equal for address comparison which casts the address inputs to u16 leading to an unaligned access. Aligning the sup_multicast_addr to u16 boundary fixes the issue. Signed-off-by: Andreas Oetken <andreas.oetken@siemens.com> Link: https://lore.kernel.org/r/20210202090304.2740471-1-ennoerlangen@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-27net: prp: add packet handling supportMurali Karicheri1-1/+72
DAN-P (Dual Attached Nodes PRP) nodes are expected to receive traditional IP packets as well as PRP (Parallel Redundancy Protocol) tagged (trailer) packets. PRP trailer is 6 bytes of PRP protocol unit called RCT, Redundancy Control Trailer (RCT) similar to HSR tag. PRP network can have traditional devices such as bridges/switches or PC attached to it and should be able to communicate. Regular Ethernet devices treat the RCT as pads. This patch adds logic to format L2 frames from network stack to add a trailer (RCT) and send it as duplicates over the slave interfaces when the protocol is PRP as per IEC 62439-3. At the ingress, it strips the trailer, do duplicate detection and rejection and forward a stripped frame up the network stack. PRP device should accept frames from Singly Attached Nodes (SAN) and thus the driver mark the link where the frame came from in the node table. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27net: hsr: define and use proto_ops ptrs to handle hsr specific framesMurali Karicheri1-0/+8
As a preparatory patch to introduce PRP, refactor the code specific to handling HSR frames into separate functions and call them through proto_ops function pointers. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27net: prp: add supervision frame generation utility functionMurali Karicheri1-0/+22
Add support for generation of PRP supervision frames. For PRP, supervision frame format is similar to HSR version 0, but have a PRP Redundancy Control Trailer (RCT) added and uses a different message type, PRP_TLV_LIFE_CHECK_DD. Also update is_supervision_frame() to include the new message type used for PRP supervision frame. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27net: hsr: introduce protocol specific function pointersMurali Karicheri1-0/+6
As a preparatory patch to introduce support for PRP protocol, add a protocol ops ptr in the private hsr structure to hold function pointers as some of the functions at protocol level packet handling is different for HSR vs PRP. It is expected that PRP will add its of set of functions for protocol handling. Modify existing hsr_announce() function to call proto_ops->send_sv_frame() to send supervision frame for HSR. This is expected to be different for PRP. So introduce a ops function ptr, send_sv_frame() for the same and initialize it to send_hsr_supervsion_frame(). Modify hsr_announce() to call proto_ops->send_sv_frame(). Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27hsr: enhance netlink socket interface to support PRPMurali Karicheri1-1/+10
Parallel Redundancy Protocol (PRP) is another redundancy protocol introduced by IEC 63439 standard. It is similar to HSR in many aspects:- - Use a pair of Ethernet interfaces to created the PRP device - Use a 6 byte redundancy protocol part (RCT, Redundancy Check Trailer) similar to HSR Tag. - Has Link Redundancy Entity (LRE) that works with RCT to implement redundancy. Key difference is that the protocol unit is a trailer instead of a prefix as in HSR. That makes it inter-operable with tradition network components such as bridges/switches which treat it as pad bytes, whereas HSR nodes requires some kind of translators (Called redbox) to talk to regular network devices. This features allows regular linux box to be converted to a DAN-P box. DAN-P stands for Dual Attached Node - PRP similar to DAN-H (Dual Attached Node - HSR). Add a comment at the header/source code to explicitly state that the driver files also handles PRP protocol as well. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-29net: hsr: remove unused inline functionsYueHaibing1-19/+0
There's no callers in-tree anymore. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29hsr: use debugfs_remove_recursive() instead of debugfs_remove()Taehee Yoo1-1/+0
If it uses debugfs_remove_recursive() instead of debugfs_remove(), hsr_priv() doesn't need to have "node_tbl_file" pointer variable. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20hsr: Fix a compilation errorxiaofeng.yan1-1/+1
A compliation error happen when building branch 5.5-rc7 In file included from net/hsr/hsr_main.c:12:0: net/hsr/hsr_main.h:194:20: error: two or more data types in declaration specifiers static inline void void hsr_debugfs_rename(struct net_device *dev) So Removed one void. Fixes: 4c2d5e33dcd3 ("hsr: rename debugfs file when interface name is changed") Signed-off-by: xiaofeng.yan <yanxiaofeng7@jd.com> Acked-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25hsr: fix a race condition in node list insertion and deletionTaehee Yoo1-2/+3
hsr nodes are protected by RCU and there is no write side lock. But node insertions and deletions could be being operated concurrently. So write side locking is needed. Test commands: ip netns add nst ip link add veth0 type veth peer name veth1 ip link add veth2 type veth peer name veth3 ip link set veth1 netns nst ip link set veth3 netns nst ip link set veth0 up ip link set veth2 up ip link add hsr0 type hsr slave1 veth0 slave2 veth2 ip a a 192.168.100.1/24 dev hsr0 ip link set hsr0 up ip netns exec nst ip link set veth1 up ip netns exec nst ip link set veth3 up ip netns exec nst ip link add hsr1 type hsr slave1 veth1 slave2 veth3 ip netns exec nst ip a a 192.168.100.2/24 dev hsr1 ip netns exec nst ip link set hsr1 up for i in {0..9} do for j in {0..9} do for k in {0..9} do for l in {0..9} do arping 192.168.100.2 -I hsr0 -s 00:01:3$i:4$j:5$k:6$l -c1 & done done done done Splat looks like: [ 236.066091][ T3286] list_add corruption. next->prev should be prev (ffff8880a5940300), but was ffff8880a5940d0. [ 236.069617][ T3286] ------------[ cut here ]------------ [ 236.070545][ T3286] kernel BUG at lib/list_debug.c:25! [ 236.071391][ T3286] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 236.072343][ T3286] CPU: 0 PID: 3286 Comm: arping Tainted: G W 5.5.0-rc1+ #209 [ 236.073463][ T3286] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 236.074695][ T3286] RIP: 0010:__list_add_valid+0x74/0xd0 [ 236.075499][ T3286] Code: 48 39 da 75 27 48 39 f5 74 36 48 39 dd 74 31 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 b [ 236.078277][ T3286] RSP: 0018:ffff8880aaa97648 EFLAGS: 00010286 [ 236.086991][ T3286] RAX: 0000000000000075 RBX: ffff8880d4624c20 RCX: 0000000000000000 [ 236.088000][ T3286] RDX: 0000000000000075 RSI: 0000000000000008 RDI: ffffed1015552ebf [ 236.098897][ T3286] RBP: ffff88809b53d200 R08: ffffed101b3c04f9 R09: ffffed101b3c04f9 [ 236.099960][ T3286] R10: 00000000308769a1 R11: ffffed101b3c04f8 R12: ffff8880d4624c28 [ 236.100974][ T3286] R13: ffff8880d4624c20 R14: 0000000040310100 R15: ffff8880ce17ee02 [ 236.138967][ T3286] FS: 00007f23479fa680(0000) GS:ffff8880d9c00000(0000) knlGS:0000000000000000 [ 236.144852][ T3286] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 236.145720][ T3286] CR2: 00007f4a14bab210 CR3: 00000000a61c6001 CR4: 00000000000606f0 [ 236.146776][ T3286] Call Trace: [ 236.147222][ T3286] hsr_add_node+0x314/0x490 [hsr] [ 236.153633][ T3286] hsr_forward_skb+0x2b6/0x1bc0 [hsr] [ 236.154362][ T3286] ? rcu_read_lock_sched_held+0x90/0xc0 [ 236.155091][ T3286] ? rcu_read_lock_bh_held+0xa0/0xa0 [ 236.156607][ T3286] hsr_dev_xmit+0x70/0xd0 [hsr] [ 236.157254][ T3286] dev_hard_start_xmit+0x160/0x740 [ 236.157941][ T3286] __dev_queue_xmit+0x1961/0x2e10 [ 236.158565][ T3286] ? netdev_core_pick_tx+0x2e0/0x2e0 [ ... ] Reported-by: syzbot+3924327f9ad5f4d2b343@syzkaller.appspotmail.com Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25hsr: rename debugfs file when interface name is changedTaehee Yoo1-0/+4
hsr interface has own debugfs file, which name is same with interface name. So, interface name is changed, debugfs file name should be changed too. Fixes: fc4ecaeebd26 ("net: hsr: add debugfs support for display node list") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25hsr: add hsr root debugfs directoryTaehee Yoo1-0/+6
In current hsr code, when hsr interface is created, it creates debugfs directory /sys/kernel/debug/<interface name>. If there is same directory or file name in there, it fails. In order to reduce possibility of failure of creation of debugfs, this patch adds root directory. Test commands: ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1 Before this patch: /sys/kernel/debug/hsr0/node_table After this patch: /sys/kernel/debug/hsr/hsr0/node_table Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25hsr: fix error handling routine in hsr_dev_finalize()Taehee Yoo1-7/+4
hsr_dev_finalize() is called to create new hsr interface. There are some wrong error handling codes. 1. wrong checking return value of debugfs_create_{dir/file}. These function doesn't return NULL. If error occurs in there, it returns error pointer. So, it should check error pointer instead of NULL. 2. It doesn't unregister interface if it fails to setup hsr interface. If it fails to initialize hsr interface after register_netdevice(), it should call unregister_netdevice(). 3. Ignore failure of creation of debugfs If creating of debugfs dir and file is failed, creating hsr interface will be failed. But debugfs doesn't affect actual logic of hsr module. So, ignoring this is more correct and this behavior is more general. Fixes: c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15net: hsr: fix debugfs path to support multiple interfacesMurali Karicheri1-2/+3
Fix the path of hsr debugfs root directory to use the net device name so that it can work with multiple interfaces. While at it, also fix some typos. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15net: hsr: fix naming of file and functionsMurali Karicheri1-4/+4
Fix the file name and functions to match with existing implementation. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: add debugfs support for display node listMurali Karicheri1-0/+17
This adds a debugfs interface to allow display the nodes learned by the hsr master. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: convert to SPDX identifierMurali Karicheri1-5/+1
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: remove camel case usage in the codeMurali Karicheri1-7/+7
Current driver code uses camel case in many places. This is seen when ran checkpatch.pl -f on files under net/hsr. This patch fixes the code to remove camel case usage. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: remove unnecessary space after a castMurali Karicheri1-5/+5
This patch removes unnecessary space after a cast. This is seen when ran checkpatch.pl -f on files under net/hsr. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: fix lines that ends with a '('Murali Karicheri1-3/+2
This patch fixes function calls that ends with '(' in a line. This is seen when ran checkpatch.pl -f option on files under net/hsr. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: fix multiple blank lines in the codeMurali Karicheri1-7/+0
This patch fixes multiple blank lines in the code. This is seen when ran checkpatch.pl -f option for files under net/hsr Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: fix lines exceeding 80 charactersMurali Karicheri1-4/+4
This patch fixes lines exceeding 80 characters. This is seen when ran checkpatch.pl with -f option for files under net/hsr. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-15net/hsr: Added support for HSR v1Peter Heise1-1/+12
This patch adds support for the newer version 1 of the HSR networking standard. Version 0 is still default and the new version has to be selected via iproute2. Main changes are in the supervision frame handling and its ethertype field. Signed-off-by: Peter Heise <peter.heise@airbus.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Better frame dispatchArvid Brodin1-2/+14
This patch removes the separate paths for frames coming from the outside, and frames sent from the HSR device, and instead makes all frames go through hsr_forward_skb() in hsr_forward.c. This greatly improves code readability and also opens up the possibility for future support of the HSR Interlink device that is the basis for HSR RedBoxes and HSR QuadBoxes, as well as VLAN compatibility. Other improvements: * A reduction in the number of times an skb is copied on machines without HAVE_EFFICIENT_UNALIGNED_ACCESS, which improves throughput somewhat. * Headers are now created using the standard eth_header(), and using the standard hard_header_len. * Each HSR slave now gets its own private skb, so slave-specific fields can be correctly set. Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Use list_head (and rcu) instead of array for slave devices.Arvid Brodin1-15/+16
Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Move to per-hsr device prune timer.Arvid Brodin1-0/+1
Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Switch from dev_add_pack() to netdev_rx_handler_register()Arvid Brodin1-0/+3
Also move the frame receive handler to hsr_slave.c. Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Better variable names and update of contact info.Arvid Brodin1-10/+10
Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-03net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)Arvid Brodin1-0/+166
High-availability Seamless Redundancy ("HSR") provides instant failover redundancy for Ethernet networks. It requires a special network topology where all nodes are connected in a ring (each node having two physical network interfaces). It is suited for applications that demand high availability and very short reaction time. HSR acts on the Ethernet layer, using a registered Ethernet protocol type to send special HSR frames in both directions over the ring. The driver creates virtual network interfaces that can be used just like any ordinary Linux network interface, for IP/TCP/UDP traffic etc. All nodes in the network ring must be HSR capable. This code is a "best effort" to comply with the HSR standard as described in IEC 62439-3:2010 (HSRv0). Signed-off-by: Arvid Brodin <arvid.brodin@xdin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.