aboutsummaryrefslogtreecommitdiffstats
path: root/net/ipv4/route.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-03-08route: set the deleted fnhe fnhe_daddr to 0 in ip_del_fnhe to fix a raceXin Long1-0/+4
The race occurs in __mkroute_output() when 2 threads lookup a dst: CPU A CPU B find_exception() find_exception() [fnhe expires] ip_del_fnhe() [fnhe is deleted] rt_bind_exception() In rt_bind_exception() it will bind a deleted fnhe with the new dst, and this dst will get no chance to be freed. It causes a dev defcnt leak and consecutive dmesg warnings: unregister_netdevice: waiting for ethX to become free. Usage count = 1 Especially thanks Jon to identify the issue. This patch fixes it by setting fnhe_daddr to 0 in ip_del_fnhe() to stop binding the deleted fnhe with a new dst when checking fnhe's fnhe_daddr and daddr in rt_bind_exception(). It works as both ip_del_fnhe() and rt_bind_exception() are protected by fnhe_lock and the fhne is freed by kfree_rcu(). Fixes: deed49df7390 ("route: check and remove route cache when we get route") Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-06ipv4/route: fail early when inet dev is missingPaolo Abeni1-4/+5
If a non local multicast packet reaches ip_route_input_rcu() while the ingress device IPv4 private data (in_dev) is NULL, we end up doing a NULL pointer dereference in IN_DEV_MFORWARD(). Since the later call to ip_route_input_mc() is going to fail if !in_dev, we can fail early in such scenario and avoid the dangerous code path. v1 -> v2: - clarified the commit message, no code changes Reported-by: Tianhao Zhao <tizhao@redhat.com> Fixes: e58e41596811 ("net: Enable support for VRF with ipv4 multicast") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
2019-03-02net: ipv4: Fix NULL pointer dereference in route lookupIdo Schimmel1-1/+1
When calculating the multipath hash for input routes the flow info is not available and therefore should not be used. Fixes: 24ba14406c5c ("route: Add multipath_hash in flowi_common to make user-define hash") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Cc: wenxu <wenxu@ucloud.cn> Acked-by: wenxu <wenxu@ucloud.cn> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01ipv4: Add ICMPv6 support when parse route ipprotoHangbin Liu1-1/+1
For ip rules, we need to use 'ipproto ipv6-icmp' to match ICMPv6 headers. But for ip -6 route, currently we only support tcp, udp and icmp. Add ICMPv6 support so we can match ipv6-icmp rules for route lookup. v2: As David Ahern and Sabrina Dubroca suggested, Add an argument to rtm_getroute_parse_ip_proto() to handle ICMP/ICMPv6 with different family. Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: eacb9384a3fe ("ipv6: support sport, dport and ip_proto in RTM_GETROUTE") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-27route: Add multipath_hash in flowi_common to make user-define hashwenxu1-0/+4
Current fib_multipath_hash_policy can make hash based on the L3 or L4. But it only work on the outer IP. So a specific tunnel always has the same hash value. But a specific tunnel may contain so many inner connections. This patch provide a generic multipath_hash in floi_common. It can make a user-define hash which can mix with L3 or L4 hash. Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+5
The netfilter conflicts were rather simple overlapping changes. However, the cls_tcindex.c stuff was a bit more complex. On the 'net' side, Cong is fixing several races and memory leaks. Whilst on the 'net-next' side we have Vlad adding the rtnl-ness support. What I've decided to do, in order to resolve this, is revert the conversion over to using a workqueue that Cong did, bringing us back to pure RCU. I did it this way because I believe that either Cong's races don't apply with have Vlad did things, or Cong will have to implement the race fix slightly differently. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08net: ipv4: use a dedicated counter for icmp_v4 redirect packetsLorenzo Bianconi1-2/+5
According to the algorithm described in the comment block at the beginning of ip_rt_send_redirect, the host should try to send 'ip_rt_redirect_number' ICMP redirect packets with an exponential backoff and then stop sending them at all assuming that the destination ignores redirects. If the device has previously sent some ICMP error packets that are rate-limited (e.g TTL expired) and continues to receive traffic, the redirect packets will never be transmitted. This happens since peer->rate_tokens will be typically greater than 'ip_rt_redirect_number' and so it will never be reset even if the redirect silence timeout (ip_rt_redirect_silence) has elapsed without receiving any packet requiring redirects. Fix it by using a dedicated counter for the number of ICMP redirect packets that has been sent by the host I have not been able to identify a given commit that introduced the issue since ip_rt_send_redirect implements the same rate-limiting algorithm from commit 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-03ipv4/igmp: Don't drop IGMP pkt with zeros src addrEdward Chron1-1/+2
Don't drop IGMP packets with a source address of all zeros which are IGMP proxy reports. This is documented in Section 2.1.1 IGMP Forwarding Rules of RFC 4541 IGMP and MLD Snooping Switches Considerations. Signed-off-by: Edward Chron <echron@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19net: ipv4: route: perform strict checks also for doit handlersJakub Kicinski1-2/+70
Make RTM_GETROUTE's doit handler use strict checks when NETLINK_F_STRICT_CHK is set. v2: - new patch (DaveA). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20net: ipv4: Set skb->dev for output route resolutionIdo Schimmel1-0/+1
When user requests to resolve an output route, the kernel synthesizes an skb where the relevant parameters (e.g., source address) are set. The skb is then passed to ip_route_output_key_hash_rcu() which might call into the flow dissector in case a multipath route was hit and a nexthop needs to be selected based on the multipath hash. Since both 'skb->dev' and 'skb->sk' are not set, a warning is triggered in the flow dissector [1]. The warning is there to prevent codepaths from silently falling back to the standard flow dissector instead of the BPF one. Therefore, instead of removing the warning, set 'skb->dev' to the loopback device, as its not used for anything but resolving the correct namespace. [1] WARNING: CPU: 1 PID: 24819 at net/core/flow_dissector.c:764 __skb_flow_dissect+0x314/0x16b0 ... RSP: 0018:ffffa0df41fdf650 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8bcded232000 RCX: 0000000000000000 RDX: ffffa0df41fdf7e0 RSI: ffffffff98e415a0 RDI: ffff8bcded232000 RBP: ffffa0df41fdf760 R08: 0000000000000000 R09: 0000000000000000 R10: ffffa0df41fdf7e8 R11: ffff8bcdf27a3000 R12: ffffffff98e415a0 R13: ffffa0df41fdf7e0 R14: ffffffff98dd2980 R15: ffffa0df41fdf7e0 FS: 00007f46f6897680(0000) GS:ffff8bcdf7a80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055933e95f9a0 CR3: 000000021e636000 CR4: 00000000001006e0 Call Trace: fib_multipath_hash+0x28c/0x2d0 ? fib_multipath_hash+0x28c/0x2d0 fib_select_path+0x241/0x32f ? __fib_lookup+0x6a/0xb0 ip_route_output_key_hash_rcu+0x650/0xa30 ? __alloc_skb+0x9b/0x1d0 inet_rtm_getroute+0x3f7/0xb80 ? __alloc_pages_nodemask+0x11c/0x2c0 rtnetlink_rcv_msg+0x1d9/0x2f0 ? rtnl_calcit.isra.24+0x120/0x120 netlink_rcv_skb+0x54/0x130 rtnetlink_rcv+0x15/0x20 netlink_unicast+0x20a/0x2c0 netlink_sendmsg+0x2d1/0x3d0 sock_sendmsg+0x39/0x50 ___sys_sendmsg+0x2a0/0x2f0 ? filemap_map_pages+0x16b/0x360 ? __handle_mm_fault+0x108e/0x13d0 __sys_sendmsg+0x63/0xa0 ? __sys_sendmsg+0x63/0xa0 __x64_sys_sendmsg+0x1f/0x30 do_syscall_64+0x5a/0x120 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: d0e13a1488ad ("flow_dissector: lookup netns by skb->sk if skb->dev is NULL") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20ipv4: Don't try to print ASCII of link level header in martian dumps.David S. Miller1-1/+1
This has no value whatsoever. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+4
Conflicts were easy to resolve using immediate context mostly, except the cls_u32.c one where I simply too the entire HEAD chunk. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10net: ipv4: don't let PMTU updates increase route MTUSabrina Dubroca1-3/+4
When an MTU update with PMTU smaller than net.ipv4.route.min_pmtu is received, we must clamp its value. However, we can receive a PMTU exception with PMTU < old_mtu < ip_rt_min_pmtu, which would lead to an increase in PMTU. To fix this, take the smallest of the old MTU and ip_rt_min_pmtu. Before this patch, in case of an update, the exception's MTU would always change. Now, an exception can have only its lock flag updated, but not the MTU, so we need to add a check on locking to the following "is this exception getting updated, or close to expiring?" test. Fixes: d52e5a7e7ca4 ("ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtu") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-04net: Move free of dst_metrics to helperDavid Ahern1-4/+1
Move the refcounting and potential free of dst metrics associated for ipv4 and ipv6 to a common helper. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-04net: common metrics init helper for dst_entryDavid Ahern1-5/+2
ipv4 and ipv6 both use refcounted metrics if FIB entries have metrics set. Move the common initialization code to a helper and use for both protocols. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02net: inet_rtm_getroute() - use new style struct initializer instead of memsetMaciej Żenczykowski1-2/+1
Signed-off-by: Maciej Żenczykowski <maze@google.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02net: ip_rt_get_source() - use new style struct initializer instead of memsetMaciej Żenczykowski1-12/+9
(allows for better compiler optimization) Signed-off-by: Maciej Żenczykowski <maze@google.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net-ipv4: remove 2 always zero parameters from ipv4_redirect()Maciej Żenczykowski1-2/+2
(the parameters in question are mark and flow_flags) Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net-ipv4: remove 2 always zero parameters from ipv4_update_pmtu()Maciej Żenczykowski1-5/+3
(the parameters in question are mark and flow_flags) Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-29route: add support for directed broadcast forwardingXin Long1-1/+5
This patch implements the feature described in rfc1812#section-5.3.5.2 and rfc2644. It allows the router to forward directed broadcast when sysctl bc_forwarding is enabled. Note that this feature could be done by iptables -j TEE, but it would cause some problems: - target TEE's gateway param has to be set with a specific address, and it's not flexible especially when the route wants forward all directed broadcasts. - this duplicates the directed broadcasts so this may cause side effects to applications. Besides, to keep consistent with other os router like BSD, it's also necessary to implement it in the route rx path. Note that route cache needs to be flushed when bc_forwarding is changed. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-1/+2
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-39/+138
Pull networking updates from David Miller: 1) Add Maglev hashing scheduler to IPVS, from Inju Song. 2) Lots of new TC subsystem tests from Roman Mashak. 3) Add TCP zero copy receive and fix delayed acks and autotuning with SO_RCVLOWAT, from Eric Dumazet. 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard Brouer. 5) Add ttl inherit support to vxlan, from Hangbin Liu. 6) Properly separate ipv6 routes into their logically independant components. fib6_info for the routing table, and fib6_nh for sets of nexthops, which thus can be shared. From David Ahern. 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP messages from XDP programs. From Nikita V. Shirokov. 8) Lots of long overdue cleanups to the r8169 driver, from Heiner Kallweit. 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau. 10) Add traffic condition monitoring to iwlwifi, from Luca Coelho. 11) Plumb extack down into fib_rules, from Roopa Prabhu. 12) Add Flower classifier offload support to igb, from Vinicius Costa Gomes. 13) Add UDP GSO support, from Willem de Bruijn. 14) Add documentation for eBPF helpers, from Quentin Monnet. 15) Add TLS tx offload to mlx5, from Ilya Lesokhin. 16) Allow applications to be given the number of bytes available to read on a socket via a control message returned from recvmsg(), from Soheil Hassas Yeganeh. 17) Add x86_32 eBPF JIT compiler, from Wang YanQing. 18) Add AF_XDP sockets, with zerocopy support infrastructure as well. From Björn Töpel. 19) Remove indirect load support from all of the BPF JITs and handle these operations in the verifier by translating them into native BPF instead. From Daniel Borkmann. 20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha. 21) Allow XDP programs to do lookups in the main kernel routing tables for forwarding. From David Ahern. 22) Allow drivers to store hardware state into an ELF section of kernel dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy. 23) Various RACK and loss detection improvements in TCP, from Yuchung Cheng. 24) Add TCP SACK compression, from Eric Dumazet. 25) Add User Mode Helper support and basic bpfilter infrastructure, from Alexei Starovoitov. 26) Support ports and protocol values in RTM_GETROUTE, from Roopa Prabhu. 27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard Brouer. 28) Add lots of forwarding selftests, from Petr Machata. 29) Add generic network device failover driver, from Sridhar Samudrala. * ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits) strparser: Add __strp_unpause and use it in ktls. rxrpc: Fix terminal retransmission connection ID to include the channel net: hns3: Optimize PF CMDQ interrupt switching process net: hns3: Fix for VF mailbox receiving unknown message net: hns3: Fix for VF mailbox cannot receiving PF response bnx2x: use the right constant Revert "net: sched: cls: Fix offloading when ingress dev is vxlan" net: dsa: b53: Fix for brcm tag issue in Cygnus SoC enic: fix UDP rss bits netdev-FAQ: clarify DaveM's position for stable backports rtnetlink: validate attributes in do_setlink() mlxsw: Add extack messages for port_{un, }split failures netdevsim: Add extack error message for devlink reload devlink: Add extack to reload and port_{un, }split operations net: metrics: add proper netlink validation ipmr: fix error path when ipmr_new_table fails ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds net: hns3: remove unused hclgevf_cfg_func_mta_filter netfilter: provide udp*_lib_lookup for nf_tproxy qed*: Utilize FW 8.37.2.0 ...
2018-06-04Merge branch 'hch.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-13/+2
Pull procfs updates from Al Viro: "Christoph's proc_create_... cleanups series" * 'hch.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (44 commits) xfs, proc: hide unused xfs procfs helpers isdn/gigaset: add back gigaset_procinfo assignment proc: update SIZEOF_PDE_INLINE_NAME for the new pde fields tty: replace ->proc_fops with ->proc_show ide: replace ->proc_fops with ->proc_show ide: remove ide_driver_proc_write isdn: replace ->proc_fops with ->proc_show atm: switch to proc_create_seq_private atm: simplify procfs code bluetooth: switch to proc_create_seq_data netfilter/x_tables: switch to proc_create_seq_private netfilter/xt_hashlimit: switch to proc_create_{seq,single}_data neigh: switch to proc_create_seq_data hostap: switch to proc_create_{seq,single}_data bonding: switch to proc_create_seq_data rtc/proc: switch to proc_create_single_data drbd: switch to proc_create_single resource: switch to proc_create_seq_data staging/rtl8192u: simplify procfs code jfs: simplify procfs code ...
2018-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-0/+31
Alexei Starovoitov says: ==================== pull-request: bpf-next 2018-05-24 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Björn Töpel cleans up AF_XDP (removes rebind, explicit cache alignment from uapi, etc). 2) David Ahern adds mtu checks to bpf_ipv{4,6}_fib_lookup() helpers. 3) Jesper Dangaard Brouer adds bulking support to ndo_xdp_xmit. 4) Jiong Wang adds support for indirect and arithmetic shifts to NFP 5) Martin KaFai Lau cleans up BTF uapi and makes the btf_header extensible. 6) Mathieu Xhonneux adds an End.BPF action to seg6local with BPF helpers allowing to edit/grow/shrink a SRH and apply on a packet generic SRv6 actions. 7) Sandipan Das adds support for bpf2bpf function calls in ppc64 JIT. 8) Yonghong Song adds BPF_TASK_FD_QUERY command for introspection of tracing events. 9) other misc fixes from Gustavo A. R. Silva, Sirio Balmelli, John Fastabend, and Magnus Karlsson ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23ipv4: support sport, dport and ip_proto in RTM_GETROUTERoopa Prabhu1-39/+107
This is a followup to fib rules sport, dport and ipproto match support. Only supports tcp, udp and icmp for ipproto. Used by fib rule self tests. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-22net/ipv4: Add helper to return path MTU based on fib resultDavid Ahern1-0/+31
Determine path MTU from a FIB lookup result. Logic is a distillation of ip_dst_mtu_maybe_forward. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-17net/ipv4: Initialize proto and ports in flow structDavid Ahern1-1/+6
Updating the FIB tracepoint for the recent change to allow rules using the protocol and ports exposed a few places where the entries in the flow struct are not initialized. For __fib_validate_source add the call to fib4_rules_early_flow_dissect since it is invoked for the input path. For netfilter, add the memset on the flow struct to avoid future problems like this. In ip_route_input_slow need to set the fields if the skb dissection does not happen. Fixes: bfff4862653b ("net: fib_rules: support for match on ip_proto, sport and dport") Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16proc: introduce proc_create_single{,_data}Christoph Hellwig1-13/+2
Variants of proc_create{,_data} that directly take a seq_file show callback and drastically reduces the boilerplate code in the callers. All trivial callers converted over. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-10ipv4: reset fnhe_mtu_locked after cache route flushedHangbin Liu1-0/+1
After route cache is flushed via ipv4_sysctl_rtcache_flush(), we forget to reset fnhe_mtu_locked in rt_bind_exception(). When pmtu is updated in __ip_rt_update_pmtu(), it will return directly since the pmtu is still locked. e.g. + ip netns exec client ping 10.10.1.1 -c 1 -s 1400 -M do PING 10.10.1.1 (10.10.1.1) 1400(1428) bytes of data. >From 10.10.0.254 icmp_seq=1 Frag needed and DF set (mtu = 0) Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02ipv4: fix fnhe usage by non-cached routesJulian Anastasov1-65/+53
Allow some non-cached routes to use non-expired fnhe: 1. ip_del_fnhe: moved above and now called by find_exception. The 4.5+ commit deed49df7390 expires fnhe only when caching routes. Change that to: 1.1. use fnhe for non-cached local output routes, with the help from (2) 1.2. allow __mkroute_input to detect expired fnhe (outdated fnhe_gw, for example) when do_cache is false, eg. when itag!=0 for unicast destinations. 2. __mkroute_output: keep fi to allow local routes with orig_oif != 0 to use fnhe info even when the new route will not be cached into fnhe. After commit 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") it means all local routes will be affected because they are not cached. This change is used to solve a PMTU problem with IPVS (and probably Netfilter DNAT) setups that redirect local clients from target local IP (local route to Virtual IP) to new remote IP target, eg. IPVS TUN real server. Loopback has 64K MTU and we need to create fnhe on the local route that will keep the reduced PMTU for the Virtual IP. Without this change fnhe_pmtu is updated from ICMP but never exposed to non-cached local routes. This includes routes with flowi4_oif!=0 for 4.6+ and with flowi4_oif=any for 4.14+). 3. update_or_create_fnhe: make sure fnhe_expires is not 0 for new entries Fixes: 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") Fixes: d6d5e999e5df ("route: do not cache fib route info on local routes with oif") Fixes: deed49df7390 ("route: check and remove route cache when we get route") Cc: David Ahern <dsahern@gmail.com> Cc: Xin Long <lucien.xin@gmail.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-5/+6
Pull networking fixes from David Miller: 1) The sockmap code has to free socket memory on close if there is corked data, from John Fastabend. 2) Tunnel names coming from userspace need to be length validated. From Eric Dumazet. 3) arp_filter() has to take VRFs properly into account, from Miguel Fadon Perlines. 4) Fix oops in error path of tcf_bpf_init(), from Davide Caratti. 5) Missing idr_remove() in u32_delete_key(), from Cong Wang. 6) More syzbot stuff. Several use of uninitialized value fixes all over, from Eric Dumazet. 7) Do not leak kernel memory to userspace in sctp, also from Eric Dumazet. 8) Discard frames from unused ports in DSA, from Andrew Lunn. 9) Fix DMA mapping and reset/failover problems in ibmvnic, from Thomas Falcon. 10) Do not access dp83640 PHY registers prematurely after reset, from Esben Haabendal. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits) vhost-net: set packet weight of tx polling to 2 * vq size net: thunderx: rework mac addresses list to u64 array inetpeer: fix uninit-value in inet_getpeer dp83640: Ensure against premature access to PHY registers after reset devlink: convert occ_get op to separate registration ARM: dts: ls1021a: Specify TBIPA register address net/fsl_pq_mdio: Allow explicit speficition of TBIPA address ibmvnic: Do not reset CRQ for Mobility driver resets ibmvnic: Fix failover case for non-redundant configuration ibmvnic: Fix reset scheduler error handling ibmvnic: Zero used TX descriptor counter on reset ibmvnic: Fix DMA mapping mistakes tipc: use the right skb in tipc_sk_fill_sock_diag() sctp: sctp_sockaddr_af must check minimal addr length for AF_INET6 net: dsa: Discard frames from unused ports sctp: do not leak kernel memory to user space soreuseport: initialise timewait reuseport field ipv4: fix uninit-value in ip_route_output_key_hash_rcu() dccp: initialize ireq->ir_mark net: fix uninit-value in __hw_addr_add_ex() ...
2018-04-07ipv4: fix uninit-value in ip_route_output_key_hash_rcu()Eric Dumazet1-5/+6
syzbot complained that res.type could be used while not initialized. Using RTN_UNSPEC as initial value seems better than using garbage. BUG: KMSAN: uninit-value in __mkroute_output net/ipv4/route.c:2200 [inline] BUG: KMSAN: uninit-value in ip_route_output_key_hash_rcu+0x31f0/0x3940 net/ipv4/route.c:2493 CPU: 1 PID: 12207 Comm: syz-executor0 Not tainted 4.16.0+ #81 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 __mkroute_output net/ipv4/route.c:2200 [inline] ip_route_output_key_hash_rcu+0x31f0/0x3940 net/ipv4/route.c:2493 ip_route_output_key_hash net/ipv4/route.c:2322 [inline] __ip_route_output_key include/net/route.h:126 [inline] ip_route_output_flow+0x1eb/0x3c0 net/ipv4/route.c:2577 raw_sendmsg+0x1861/0x3ed0 net/ipv4/raw.c:653 inet_sendmsg+0x48d/0x740 net/ipv4/af_inet.c:764 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] SYSC_sendto+0x6c3/0x7e0 net/socket.c:1747 SyS_sendto+0x8a/0xb0 net/socket.c:1715 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x455259 RSP: 002b:00007fdc0625dc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007fdc0625e6d4 RCX: 0000000000455259 RDX: 0000000000000000 RSI: 0000000020000040 RDI: 0000000000000013 RBP: 000000000072bea0 R08: 0000000020000080 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000004f7 R14: 00000000006fa7c8 R15: 0000000000000000 Local variable description: ----res.i.i@ip_route_output_flow Variable was created at: ip_route_output_flow+0x75/0x3c0 net/ipv4/route.c:2576 raw_sendmsg+0x1861/0x3ed0 net/ipv4/raw.c:653 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-05headers: untangle kmemleak.h from mm.hRandy Dunlap1-1/+0
Currently <linux/slab.h> #includes <linux/kmemleak.h> for no obvious reason. It looks like it's only a convenience, so remove kmemleak.h from slab.h and add <linux/kmemleak.h> to any users of kmemleak_* that don't already #include it. Also remove <linux/kmemleak.h> from source files that do not use it. This is tested on i386 allmodconfig and x86_64 allmodconfig. It would be good to run it through the 0day bot for other $ARCHes. I have neither the horsepower nor the storage space for the other $ARCHes. Update: This patch has been extensively build-tested by both the 0day bot & kisskb/ozlabs build farms. Both of them reported 2 build failures for which patches are included here (in v2). [ slab.h is the second most used header file after module.h; kernel.h is right there with slab.h. There could be some minor error in the counting due to some #includes having comments after them and I didn't combine all of those. ] [akpm@linux-foundation.org: security/keys/big_key.c needs vmalloc.h, per sfr] Link: http://lkml.kernel.org/r/e4309f98-3749-93e1-4bb7-d9501a39d015@infradead.org Link: http://kisskb.ellerman.id.au/kisskb/head/13396/ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Ingo Molnar <mingo@kernel.org> Reported-by: Michael Ellerman <mpe@ellerman.id.au> [2 build failures] Reported-by: Fengguang Wu <fengguang.wu@intel.com> [2 build failures] Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: John Johansen <john.johansen@canonical.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-27net: Drop pernet_operations::asyncKirill Tkhai1-4/+0
Synchronous pernet_operations are not allowed anymore. All are asynchronous. So, drop the structure member. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26net: Use octal not symbolic permissionsJoe Perches1-2/+2
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-15/+32
Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtuSabrina Dubroca1-7/+19
Prior to the rework of PMTU information storage in commit 2c8cec5c10bc ("ipv4: Cache learned PMTU information in inetpeer."), when a PMTU event advertising a PMTU smaller than net.ipv4.route.min_pmtu was received, we would disable setting the DF flag on packets by locking the MTU metric, and set the PMTU to net.ipv4.route.min_pmtu. Since then, we don't disable DF, and set PMTU to net.ipv4.route.min_pmtu, so the intermediate router that has this link with a small MTU will have to drop the packets. This patch reestablishes pre-2.6.39 behavior by splitting rtable->rt_pmtu into a bitfield with rt_mtu_locked and rt_pmtu. rt_mtu_locked indicates that we shouldn't set the DF bit on that path, and is checked in ip_dont_fragment(). One possible workaround is to set net.ipv4.route.min_pmtu to a value low enough to accommodate the lowest MTU encountered. Fixes: 2c8cec5c10bc ("ipv4: Cache learned PMTU information in inetpeer.") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-13Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller1-8/+13
Steffen Klassert says: ==================== pull request (net): ipsec 2018-03-13 1) Refuse to insert 32 bit userspace socket policies on 64 bit systems like we do it for standard policies. We don't have a compat layer, so inserting socket policies from 32 bit userspace will lead to a broken configuration. 2) Make the policy hold queue work without the flowcache. Dummy bundles are not chached anymore, so we need to generate a new one on each lookup as long as the SAs are not yet in place. 3) Fix the validation of the esn replay attribute. The The sanity check in verify_replay() is bypassed if the XFRM_STATE_ESN flag is not set. Fix this by doing the sanity check uncoditionally. From Florian Westphal. 4) After most of the dst_entry garbage collection code is removed, we may leak xfrm_dst entries as they are neither cached nor tracked somewhere. Fix this by reusing the 'uncached_list' to track xfrm_dst entries too. From Xin Long. 5) Fix a rcu_read_lock/rcu_read_unlock imbalance in xfrm_get_tos() From Xin Long. 6) Fix an infinite loop in xfrm_get_dst_nexthop. On transport mode we fetch the child dst_entry after we continue, so this pointer is never updated. Fix this by fetching it before we continue. 7) Fix ESN sequence number gap after IPsec GSO packets. We accidentally increment the sequence number counter on the xfrm_state by one packet too much in the ESN case. Fix this by setting the sequence number to the correct value. 8) Reset the ethernet protocol after decapsulation only if a mac header was set. Otherwise it breaks configurations with TUN devices. From Yossi Kuperman. 9) Fix __this_cpu_read() usage in preemptible code. Use this_cpu_read() instead in ipcomp_alloc_tfms(). From Greg Hackmann. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+15
All of the conflicts were cases of overlapping changes. In net/core/devlink.c, we have to make care that the resouce size_params have become a struct member rather than a pointer to such an object. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04net/ipv4: Simplify fib_multipath_hash with optional flow keysDavid Ahern1-14/+10
As of commit e37b1e978bec5 ("ipv6: route: dissect flow in input path if fib rules need it") fib_multipath_hash takes an optional flow keys. If non-NULL it means the skb has already been dissected. If not set, then fib_multipath_hash needs to call skb_flow_dissect_flow_keys. Simplify the logic by setting flkeys to the local stack variable keys. Simplifies fib_multipath_hash by only have 1 set of instructions setting hash_keys. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04net: Align ip_multipath_l3_keys and ip6_multipath_l3_keysDavid Ahern1-9/+11
Symmetry is good and allows easy comparison that ipv4 and ipv6 are doing the same thing. To that end, change ip_multipath_l3_keys to set addresses at the end after the icmp compares, and move the initialization of ipv6 flow keys to rt6_multipath_hash. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04net/ipv4: Pass net to fib_multipath_hash instead of fib_infoDavid Ahern1-3/+2
fib_multipath_hash only needs net struct to check a sysctl. Make it clear by passing net instead of fib_info. In the end this allows alignment between the ipv4 and ipv6 versions. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01vrf: check forwarding on the original netdevice when generating ICMP dest unreachableStephen Suryaputra1-1/+10
When ip_error() is called the device is the l3mdev master instead of the original device. So the forwarding check should be on the original one. Changes from v2: - Handle the original device disappearing (per David Ahern) - Minimize the change in code order Changes from v1: - Only need to reset the device on which __in_dev_get_rcu() is done (per David Ahern). Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01net: ipv4: avoid unused variable warning for sysctlArnd Bergmann1-2/+1
The newly introudced ip_min_valid_pmtu variable is only used when CONFIG_SYSCTL is set: net/ipv4/route.c:135:12: error: 'ip_min_valid_pmtu' defined but not used [-Werror=unused-variable] This moves it to the other variables like it, to avoid the harmless warning. Fixes: c7272c2f1229 ("net: ipv4: don't allow setting net.ipv4.route.min_pmtu below 68") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28ipv6: route: dissect flow in input path if fib rules need itRoopa Prabhu1-14/+29
Dissect flow in fwd path if fib rules require it. Controlled by a flag to avoid penatly for the common case. Flag is set when fib rules with sport, dport and proto match that require flow dissect are installed. Also passes the dissected hash keys to the multipath hash function when applicable to avoid dissecting the flow again. icmp packets will continue to use inner header for hash calculations (Thanks to Nikolay Aleksandrov for some review here). Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27net: ipv4: don't allow setting net.ipv4.route.min_pmtu below 68Sabrina Dubroca1-2/+6
According to RFC 1191 sections 3 and 4, ICMP frag-needed messages indicating an MTU below 68 should be rejected: A host MUST never reduce its estimate of the Path MTU below 68 octets. and (talking about ICMP frag-needed's Next-Hop MTU field): This field will never contain a value less than 68, since every router "must be able to forward a datagram of 68 octets without fragmentation". Furthermore, by letting net.ipv4.route.min_pmtu be set to negative values, we can end up with a very large PMTU when (-1) is cast into u32. Let's also make ip_rt_min_pmtu a u32, since it's only ever compared to unsigned ints. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+2
2018-02-22net: ipv4: Set addr_type in hash_keys for forwarded caseDavid Ahern1-0/+2
The result of the skb flow dissect is copied from keys to hash_keys to ensure only the intended data is hashed. The original L4 hash patch overlooked setting the addr_type for this case; add it. Fixes: bf4e0a3db97eb ("net: ipv4: add support for ECMP hash policy choice") Reported-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.