| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
KMSAN detected read beyond end of buffer in vti and sit devices when
passing truncated packets with PF_PACKET. The issue affects additional
ip tunnel devices.
Extend commit 76c0ddd8c3a6 ("ip6_tunnel: be careful when accessing the
inner header") and commit ccfec9e5cb2d ("ip_tunnel: be careful when
accessing the inner header").
Move the check to a separate helper and call at the start of each
ndo_start_xmit function in net/ipv4 and net/ipv6.
Minor changes:
- convert dev_kfree_skb to kfree_skb on error path,
as dev_kfree_skb calls consume_skb which is not for error paths.
- use pskb_network_may_pull even though that is pedantic here,
as the same as pskb_may_pull for devices without llheaders.
- do not cache ipv6 hdrs if used only once
(unsafe across pskb_may_pull, was more relevant to earlier patch)
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
xfrm6_policy_check() might have re-allocated skb->head, we need
to reload ipv6 header pointer.
sysbot reported :
BUG: KASAN: use-after-free in __ipv6_addr_type+0x302/0x32f net/ipv6/addrconf_core.c:40
Read of size 4 at addr ffff888191b8cb70 by task syz-executor2/1304
CPU: 0 PID: 1304 Comm: syz-executor2 Not tainted 4.20.0-rc7+ #356
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x244/0x39d lib/dump_stack.c:113
print_address_description.cold.7+0x9/0x1ff mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.8+0x242/0x309 mm/kasan/report.c:412
__asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:432
__ipv6_addr_type+0x302/0x32f net/ipv6/addrconf_core.c:40
ipv6_addr_type include/net/ipv6.h:403 [inline]
ip6_tnl_get_cap+0x27/0x190 net/ipv6/ip6_tunnel.c:727
ip6_tnl_rcv_ctl+0xdb/0x2a0 net/ipv6/ip6_tunnel.c:757
vti6_rcv+0x336/0x8f3 net/ipv6/ip6_vti.c:321
xfrm6_ipcomp_rcv+0x1a5/0x3a0 net/ipv6/xfrm6_protocol.c:132
ip6_protocol_deliver_rcu+0x372/0x1940 net/ipv6/ip6_input.c:394
ip6_input_finish+0x84/0x170 net/ipv6/ip6_input.c:434
NF_HOOK include/linux/netfilter.h:289 [inline]
ip6_input+0xe9/0x600 net/ipv6/ip6_input.c:443
IPVS: ftp: loaded support on port[0] = 21
ip6_mc_input+0x514/0x11c0 net/ipv6/ip6_input.c:537
dst_input include/net/dst.h:450 [inline]
ip6_rcv_finish+0x17a/0x330 net/ipv6/ip6_input.c:76
NF_HOOK include/linux/netfilter.h:289 [inline]
ipv6_rcv+0x115/0x640 net/ipv6/ip6_input.c:272
__netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4973
__netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5083
process_backlog+0x24e/0x7a0 net/core/dev.c:5923
napi_poll net/core/dev.c:6346 [inline]
net_rx_action+0x7fa/0x19b0 net/core/dev.c:6412
__do_softirq+0x308/0xb7e kernel/softirq.c:292
do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1027
</IRQ>
do_softirq.part.14+0x126/0x160 kernel/softirq.c:337
do_softirq+0x19/0x20 kernel/softirq.c:340
netif_rx_ni+0x521/0x860 net/core/dev.c:4569
dev_loopback_xmit+0x287/0x8c0 net/core/dev.c:3576
NF_HOOK include/linux/netfilter.h:289 [inline]
ip6_finish_output2+0x193a/0x2930 net/ipv6/ip6_output.c:84
ip6_fragment+0x2b06/0x3850 net/ipv6/ip6_output.c:727
ip6_finish_output+0x6b7/0xc50 net/ipv6/ip6_output.c:152
NF_HOOK_COND include/linux/netfilter.h:278 [inline]
ip6_output+0x232/0x9d0 net/ipv6/ip6_output.c:171
dst_output include/net/dst.h:444 [inline]
ip6_local_out+0xc5/0x1b0 net/ipv6/output_core.c:176
ip6_send_skb+0xbc/0x340 net/ipv6/ip6_output.c:1727
ip6_push_pending_frames+0xc5/0xf0 net/ipv6/ip6_output.c:1747
rawv6_push_pending_frames net/ipv6/raw.c:615 [inline]
rawv6_sendmsg+0x3a3e/0x4b40 net/ipv6/raw.c:945
kobject: 'queues' (0000000089e6eea2): kobject_add_internal: parent: 'tunl0', set: '<NULL>'
kobject: 'queues' (0000000089e6eea2): kobject_uevent_env
inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798
kobject: 'queues' (0000000089e6eea2): kobject_uevent_env: filter function caused the event to drop!
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg+0xd5/0x120 net/socket.c:631
sock_write_iter+0x35e/0x5c0 net/socket.c:900
call_write_iter include/linux/fs.h:1857 [inline]
new_sync_write fs/read_write.c:474 [inline]
__vfs_write+0x6b8/0x9f0 fs/read_write.c:487
kobject: 'rx-0' (00000000e2d902d9): kobject_add_internal: parent: 'queues', set: 'queues'
kobject: 'rx-0' (00000000e2d902d9): kobject_uevent_env
vfs_write+0x1fc/0x560 fs/read_write.c:549
ksys_write+0x101/0x260 fs/read_write.c:598
kobject: 'rx-0' (00000000e2d902d9): fill_kobj_path: path = '/devices/virtual/net/tunl0/queues/rx-0'
__do_sys_write fs/read_write.c:610 [inline]
__se_sys_write fs/read_write.c:607 [inline]
__x64_sys_write+0x73/0xb0 fs/read_write.c:607
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
kobject: 'tx-0' (00000000443b70ac): kobject_add_internal: parent: 'queues', set: 'queues'
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457669
Code: fd b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f9bd200bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457669
RDX: 000000000000058f RSI: 00000000200033c0 RDI: 0000000000000003
kobject: 'tx-0' (00000000443b70ac): kobject_uevent_env
RBP: 000000000072bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9bd200c6d4
R13: 00000000004c2dcc R14: 00000000004da398 R15: 00000000ffffffff
Allocated by task 1304:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553
__do_kmalloc_node mm/slab.c:3684 [inline]
__kmalloc_node_track_caller+0x50/0x70 mm/slab.c:3698
__kmalloc_reserve.isra.41+0x41/0xe0 net/core/skbuff.c:140
__alloc_skb+0x155/0x760 net/core/skbuff.c:208
kobject: 'tx-0' (00000000443b70ac): fill_kobj_path: path = '/devices/virtual/net/tunl0/queues/tx-0'
alloc_skb include/linux/skbuff.h:1011 [inline]
__ip6_append_data.isra.49+0x2f1a/0x3f50 net/ipv6/ip6_output.c:1450
ip6_append_data+0x1bc/0x2d0 net/ipv6/ip6_output.c:1619
rawv6_sendmsg+0x15ab/0x4b40 net/ipv6/raw.c:938
inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg+0xd5/0x120 net/socket.c:631
___sys_sendmsg+0x7fd/0x930 net/socket.c:2116
__sys_sendmsg+0x11d/0x280 net/socket.c:2154
__do_sys_sendmsg net/socket.c:2163 [inline]
__se_sys_sendmsg net/socket.c:2161 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2161
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
kobject: 'gre0' (00000000cb1b2d7b): kobject_add_internal: parent: 'net', set: 'devices'
Freed by task 1304:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521
kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
__cache_free mm/slab.c:3498 [inline]
kfree+0xcf/0x230 mm/slab.c:3817
skb_free_head+0x93/0xb0 net/core/skbuff.c:553
pskb_expand_head+0x3b2/0x10d0 net/core/skbuff.c:1498
__pskb_pull_tail+0x156/0x18a0 net/core/skbuff.c:1896
pskb_may_pull include/linux/skbuff.h:2188 [inline]
_decode_session6+0xd11/0x14d0 net/ipv6/xfrm6_policy.c:150
__xfrm_decode_session+0x71/0x140 net/xfrm/xfrm_policy.c:3272
kobject: 'gre0' (00000000cb1b2d7b): kobject_uevent_env
__xfrm_policy_check+0x380/0x2c40 net/xfrm/xfrm_policy.c:3322
__xfrm_policy_check2 include/net/xfrm.h:1170 [inline]
xfrm_policy_check include/net/xfrm.h:1175 [inline]
xfrm6_policy_check include/net/xfrm.h:1185 [inline]
vti6_rcv+0x4bd/0x8f3 net/ipv6/ip6_vti.c:316
xfrm6_ipcomp_rcv+0x1a5/0x3a0 net/ipv6/xfrm6_protocol.c:132
ip6_protocol_deliver_rcu+0x372/0x1940 net/ipv6/ip6_input.c:394
ip6_input_finish+0x84/0x170 net/ipv6/ip6_input.c:434
NF_HOOK include/linux/netfilter.h:289 [inline]
ip6_input+0xe9/0x600 net/ipv6/ip6_input.c:443
ip6_mc_input+0x514/0x11c0 net/ipv6/ip6_input.c:537
dst_input include/net/dst.h:450 [inline]
ip6_rcv_finish+0x17a/0x330 net/ipv6/ip6_input.c:76
NF_HOOK include/linux/netfilter.h:289 [inline]
ipv6_rcv+0x115/0x640 net/ipv6/ip6_input.c:272
__netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4973
__netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5083
process_backlog+0x24e/0x7a0 net/core/dev.c:5923
kobject: 'gre0' (00000000cb1b2d7b): fill_kobj_path: path = '/devices/virtual/net/gre0'
napi_poll net/core/dev.c:6346 [inline]
net_rx_action+0x7fa/0x19b0 net/core/dev.c:6412
__do_softirq+0x308/0xb7e kernel/softirq.c:292
The buggy address belongs to the object at ffff888191b8cac0
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 176 bytes inside of
512-byte region [ffff888191b8cac0, ffff888191b8ccc0)
The buggy address belongs to the page:
page:ffffea000646e300 count:1 mapcount:0 mapping:ffff8881da800940 index:0x0
flags: 0x2fffc0000000200(slab)
raw: 02fffc0000000200 ffffea0006eaaa48 ffffea00065356c8 ffff8881da800940
raw: 0000000000000000 ffff888191b8c0c0 0000000100000006 0000000000000000
page dumped because: kasan: bad access detected
kobject: 'queues' (000000005fd6226e): kobject_add_internal: parent: 'gre0', set: '<NULL>'
Memory state around the buggy address:
ffff888191b8ca00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888191b8ca80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
>ffff888191b8cb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888191b8cb80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888191b8cc00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: 0d3c703a9d17 ("ipv6: Cleanup IPv6 tunnel receive path")
Fixes: ed1efb2aefbb ("ipv6: Add support for IPsec virtual tunnel interfaces")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Before the commit d6990976af7c ("vti6: fix PMTU caching and reporting
on xmit") '!skb->ignore_df' check was always true because the function
skb_scrub_packet() was called before it, resetting ignore_df to zero.
In the commit, skb_scrub_packet() was moved below, and now this check
can be false for the packet, e.g. when sending it in the two fragments,
this prevents successful PMTU updates in such case. The next attempts
to send the packet lead to the same tx error. Moreover, vti6 initial
MTU value relies on PMTU adjustments.
This issue can be reproduced with the following LTP test script:
udp_ipsec_vti.sh -6 -p ah -m tunnel -s 2000
Fixes: ccd740cbc6e0 ("vti6: Add pmtu handling to vti6_xmit.")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If load ip6_vti module and create a network namespace when set
fb_tunnels_only_for_init_net to 1, then exit the namespace will
cause following crash:
[ 6601.677036] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[ 6601.679057] PGD 8000000425eca067 P4D 8000000425eca067 PUD 424292067 PMD 0
[ 6601.680483] Oops: 0000 [#1] SMP PTI
[ 6601.681223] CPU: 7 PID: 93 Comm: kworker/u16:1 Kdump: loaded Tainted: G E 4.18.0+ #3
[ 6601.683153] Hardware name: Fedora Project OpenStack Nova, BIOS seabios-1.7.5-11.el7 04/01/2014
[ 6601.684919] Workqueue: netns cleanup_net
[ 6601.685742] RIP: 0010:vti6_exit_batch_net+0x87/0xd0 [ip6_vti]
[ 6601.686932] Code: 7b 08 48 89 e6 e8 b9 ea d3 dd 48 8b 1b 48 85 db 75 ec 48 83 c5 08 48 81 fd 00 01 00 00 75 d5 49 8b 84 24 08 01 00 00 48 89 e6 <48> 8b 78 08 e8 90 ea d3 dd 49 8b 45 28 49 39 c6 4c 8d 68 d8 75 a1
[ 6601.690735] RSP: 0018:ffffa897c2737de0 EFLAGS: 00010246
[ 6601.691846] RAX: 0000000000000000 RBX: 0000000000000000 RCX: dead000000000200
[ 6601.693324] RDX: 0000000000000015 RSI: ffffa897c2737de0 RDI: ffffffff9f2ea9e0
[ 6601.694824] RBP: 0000000000000100 R08: 0000000000000000 R09: 0000000000000000
[ 6601.696314] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8dc323c07e00
[ 6601.697812] R13: ffff8dc324a63100 R14: ffffa897c2737e30 R15: ffffa897c2737e30
[ 6601.699345] FS: 0000000000000000(0000) GS:ffff8dc33fdc0000(0000) knlGS:0000000000000000
[ 6601.701068] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6601.702282] CR2: 0000000000000008 CR3: 0000000424966002 CR4: 00000000001606e0
[ 6601.703791] Call Trace:
[ 6601.704329] cleanup_net+0x1b4/0x2c0
[ 6601.705268] process_one_work+0x16c/0x370
[ 6601.706145] worker_thread+0x49/0x3e0
[ 6601.706942] kthread+0xf8/0x130
[ 6601.707626] ? rescuer_thread+0x340/0x340
[ 6601.708476] ? kthread_bind+0x10/0x10
[ 6601.709266] ret_from_fork+0x35/0x40
Reproduce:
modprobe ip6_vti
echo 1 > /proc/sys/net/core/fb_tunnels_only_for_init_net
unshare -n
exit
This because ip6n->tnls_wc[0] point to fallback device in default, but
in non-default namespace, ip6n->tnls_wc[0] will be NULL, so add the NULL
check comparatively.
Fixes: e2948e5af8ee ("ip6_vti: fix creating fallback tunnel device for vti6")
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When set fb_tunnels_only_for_init_net to 1, don't create fallback tunnel
device for vti6 when a new namespace is created.
Tested:
[root@builder2 ~]# modprobe ip6_tunnel
[root@builder2 ~]# modprobe ip6_vti
[root@builder2 ~]# echo 1 > /proc/sys/net/core/fb_tunnels_only_for_init_net
[root@builder2 ~]# unshare -n
[root@builder2 ~]# ip link
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Same as ip_vti, use iptunnel_xmit_stats to updates stats in tunnel xmit
code path.
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When setting the skb->dst before doing the MTU check, the route PMTU
caching and reporting is done on the new dst which is about to be
released.
Instead, PMTU handling should be done using the original dst.
This is aligned with IPv4 VTI.
Fixes: ccd740cbc6 ("vti6: Add pmtu handling to vti6_xmit.")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The bpf syscall and selftests conflicts were trivial
overlapping changes.
The r8169 change involved moving the added mdelay from 'net' into a
different function.
A TLS close bug fix overlapped with the splitting of the TLS state
into separate TX and RX parts. I just expanded the tests in the bug
fix from "ctx->conf == X" into "ctx->tx_conf == X && ctx->rx_conf
== X".
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The comment of vti6_ioctl() is wrong. which use vti6_tnl_ioctl
instead of vti6_ioctl.
Signed-off-by: Sun Lianwen <sunlw.fnst@cn.fujitsu.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
A vti6 interface can carry IPv4 as well, so it makes no sense to
enforce a minimum MTU of IPV6_MIN_MTU.
If the user sets an MTU below IPV6_MIN_MTU, IPv6 will be
disabled on the interface, courtesy of addrconf_notify().
Reported-by: Xin Long <lucien.xin@gmail.com>
Fixes: b96f9afee4eb ("ipv4/6: use core net MTU range checking")
Fixes: c6741fbed6dc ("vti6: Properly adjust vti6 MTU from MTU of lower device")
Fixes: 53c81e95df17 ("ip6_vti: adjust vti mtu according to mtu of lower device")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Use valid_name() to make sure user does not provide illegal
device name.
Fixes: ed1efb2aefbb ("ipv6: Add support for IPsec virtual tunnel interfaces")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Minor conflicts in drivers/net/ethernet/mellanox/mlx5/core/en_rep.c,
we had some overlapping changes:
1) In 'net' MLX5E_PARAMS_LOG_{SQ,RQ}_SIZE -->
MLX5E_REP_PARAMS_LOG_{SQ,RQ}_SIZE
2) In 'net-next' params->log_rq_size is renamed to be
params->log_rq_mtu_frames.
3) In 'net-next' params->hard_mtu is added.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Synchronous pernet_operations are not allowed anymore.
All are asynchronous. So, drop the structure member.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We shouldn't allow a tunnel to have IP_MAX_MTU as MTU, because
another IPv6 header is going on top of our packets. Without this
patch, we might end up building packets bigger than IP_MAX_MTU.
Fixes: b96f9afee4eb ("ipv4/6: use core net MTU range checking")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
In vti6_link_config(), if MTU is already given on link creation
or change, validate and use it instead of recomputing it. To do
that, we need to propagate the knowledge that MTU was set by
userspace all the way down to vti6_link_config().
To keep this simple, vti6_dev_init() sets the new 'keep_mtu'
argument of vti6_link_config() to true: on initialization, we
don't have convenient access to netlink attributes there, but we
will anyway check whether dev->mtu is set in vti6_link_config().
If it's non-zero, it was set to the value of the IFLA_MTU
attribute during creation. Otherwise, determine a reasonable
value.
Fixes: ed1efb2aefbb ("ipv6: Add support for IPsec virtual tunnel interfaces")
Fixes: 53c81e95df17 ("ip6_vti: adjust vti mtu according to mtu of lower device")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
If a lower device is found, we don't need to subtract
LL_MAX_HEADER to calculate our MTU: just use its MTU, the link
layer headers are already taken into account by it.
If the lower device is not found, start from ETH_DATA_LEN
instead, and only in this case subtract a worst-case
LL_MAX_HEADER.
We then need to subtract our additional IPv6 header from the
calculation.
While at it, note that vti6 doesn't have a hardware header, so
it doesn't need to set dev->hard_header_len. And as
vti6_link_config() now always sets the MTU, there's no need to
set a default value in vti6_dev_setup().
This makes the behaviour consistent with IPv4 vti, after
commit a32452366b72 ("vti4: Don't count header length twice."),
which was accidentally reverted by merge commit f895f0cfbb77
("Merge branch 'master' of
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec").
While commit 53c81e95df17 ("ip6_vti: adjust vti mtu according to
mtu of lower device") improved on the original situation, this
was still not ideal. As reported in that commit message itself,
if we start from an underlying veth MTU of 9000, we end up with
an MTU of 8832, that is, 9000 - LL_MAX_HEADER - sizeof(ipv6hdr).
This should simply be 8880, or 9000 - sizeof(ipv6hdr) instead:
we found the lower device (veth) and we know we don't have any
additional link layer header, so there's no need to subtract an
hypothetical worst-case number.
Fixes: 53c81e95df17 ("ip6_vti: adjust vti mtu according to mtu of lower device")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
IPv6 does path selection for multipath routes deep in the lookup
functions. The next patch adds L4 hash option and needs the skb
for the forward path. To get the skb to the relevant FIB lookup
functions it needs to go through the fib rules layer, so add a
lookup_data argument to the fib_lookup_arg struct.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These pernet_operations are similar to ip6_tnl_net_ops. Exit method
unregisters all net vti6 tunnels, and it looks like another
pernet_operations are not interested in foreign net vti6 list.
Init method registers netdevice. So, it's possible to mark them async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some dst_ops (e.g. md_dst_ops)) doesn't set this handler. It may result to:
"BUG: unable to handle kernel NULL pointer dereference at (null)"
Let's add a helper to check if update_pmtu is available before calling it.
Fixes: 52a589d51f10 ("geneve: update skb dst pmtu on tx path")
Fixes: a93bf0ff4490 ("vxlan: update skb dst pmtu on tx path")
CC: Roman Kapl <code@rkapl.cz>
CC: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
LTP/udp6_ipsec_vti tests fail when sending large UDP datagrams over
ip6_vti that require fragmentation and the underlying device has an
MTU smaller than 1500 plus some extra space for headers. This happens
because ip6_vti, by default, sets MTU to ETH_DATA_LEN and not updating
it depending on a destination address or link parameter. Further
attempts to send UDP packets may succeed because pmtu gets updated on
ICMPV6_PKT_TOOBIG in vti6_err().
In case the lower device has larger MTU size, e.g. 9000, ip6_vti works
but not using the possible maximum size, output packets have 1500 limit.
The above cases require manual MTU setup after ip6_vti creation. However
ip_vti already updates MTU based on lower device with ip_tunnel_bind_dev().
Here is the example when the lower device MTU is set to 9000:
# ip a sh ltp_ns_veth2
ltp_ns_veth2@if7: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 ...
inet 10.0.0.2/24 scope global ltp_ns_veth2
inet6 fd00::2/64 scope global
# ip li add vti6 type vti6 local fd00::2 remote fd00::1
# ip li show vti6
vti6@NONE: <POINTOPOINT,NOARP> mtu 1500 ...
link/tunnel6 fd00::2 peer fd00::1
After the patch:
# ip li add vti6 type vti6 local fd00::2 remote fd00::1
# ip li show vti6
vti6@NONE: <POINTOPOINT,NOARP> mtu 8832 ...
link/tunnel6 fd00::2 peer fd00::1
Reported-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Just simple overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When running LTP IPsec tests, KASan might report:
BUG: KASAN: use-after-free in vti_tunnel_xmit+0xeee/0xff0 [ip_vti]
Read of size 4 at addr ffff880dc6ad1980 by task swapper/0/0
...
Call Trace:
<IRQ>
dump_stack+0x63/0x89
print_address_description+0x7c/0x290
kasan_report+0x28d/0x370
? vti_tunnel_xmit+0xeee/0xff0 [ip_vti]
__asan_report_load4_noabort+0x19/0x20
vti_tunnel_xmit+0xeee/0xff0 [ip_vti]
? vti_init_net+0x190/0x190 [ip_vti]
? save_stack_trace+0x1b/0x20
? save_stack+0x46/0xd0
dev_hard_start_xmit+0x147/0x510
? icmp_echo.part.24+0x1f0/0x210
__dev_queue_xmit+0x1394/0x1c60
...
Freed by task 0:
save_stack_trace+0x1b/0x20
save_stack+0x46/0xd0
kasan_slab_free+0x70/0xc0
kmem_cache_free+0x81/0x1e0
kfree_skbmem+0xb1/0xe0
kfree_skb+0x75/0x170
kfree_skb_list+0x3e/0x60
__dev_queue_xmit+0x1298/0x1c60
dev_queue_xmit+0x10/0x20
neigh_resolve_output+0x3a8/0x740
ip_finish_output2+0x5c0/0xe70
ip_finish_output+0x4ba/0x680
ip_output+0x1c1/0x3a0
xfrm_output_resume+0xc65/0x13d0
xfrm_output+0x1e4/0x380
xfrm4_output_finish+0x5c/0x70
Can be fixed if we get skb->len before dst_output().
Fixes: b9959fd3b0fa ("vti: switch to new ip tunnel code")
Fixes: 22e1b23dafa8 ("vti6: Support inter address family tunneling.")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement exit_batch() method to dismantle more devices
per round.
(rtnl_lock() ...
unregister_netdevice_many() ...
rtnl_unlock())
Tested:
$ cat add_del_unshare.sh
for i in `seq 1 40`
do
(for j in `seq 1 100` ; do unshare -n /bin/true >/dev/null ; done) &
done
wait ; grep net_namespace /proc/slabinfo
Before patch :
$ time ./add_del_unshare.sh
net_namespace 110 267 5504 1 2 : tunables 8 4 0 : slabdata 110 267 0
real 3m25.292s
user 0m0.644s
sys 0m40.153s
After patch:
$ time ./add_del_unshare.sh
net_namespace 126 282 5504 1 2 : tunables 8 4 0 : slabdata 126 282 0
real 1m38.965s
user 0m0.688s
sys 0m37.017s
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
flow cache is removed in next commit.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for extended error reporting.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for extended error reporting.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for extended error reporting.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Network devices can allocate reasources and private memory using
netdev_ops->ndo_init(). However, the release of these resources
can occur in one of two different places.
Either netdev_ops->ndo_uninit() or netdev->destructor().
The decision of which operation frees the resources depends upon
whether it is necessary for all netdev refs to be released before it
is safe to perform the freeing.
netdev_ops->ndo_uninit() presumably can occur right after the
NETDEV_UNREGISTER notifier completes and the unicast and multicast
address lists are flushed.
netdev->destructor(), on the other hand, does not run until the
netdev references all go away.
Further complicating the situation is that netdev->destructor()
almost universally does also a free_netdev().
This creates a problem for the logic in register_netdevice().
Because all callers of register_netdevice() manage the freeing
of the netdev, and invoke free_netdev(dev) if register_netdevice()
fails.
If netdev_ops->ndo_init() succeeds, but something else fails inside
of register_netdevice(), it does call ndo_ops->ndo_uninit(). But
it is not able to invoke netdev->destructor().
This is because netdev->destructor() will do a free_netdev() and
then the caller of register_netdevice() will do the same.
However, this means that the resources that would normally be released
by netdev->destructor() will not be.
Over the years drivers have added local hacks to deal with this, by
invoking their destructor parts by hand when register_netdevice()
fails.
Many drivers do not try to deal with this, and instead we have leaks.
Let's close this hole by formalizing the distinction between what
private things need to be freed up by netdev->destructor() and whether
the driver needs unregister_netdevice() to perform the free_netdev().
netdev->priv_destructor() performs all actions to free up the private
resources that used to be freed by netdev->destructor(), except for
free_netdev().
netdev->needs_free_netdev is a boolean that indicates whether
free_netdev() should be done at the end of unregister_netdevice().
Now, register_netdevice() can sanely release all resources after
ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit()
and netdev->priv_destructor().
And at the end of unregister_netdevice(), we invoke
netdev->priv_destructor() and optionally call free_netdev().
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This feature allows the administrator to set an fwmark for
packets traversing a tunnel. This allows the use of independent
routing tables for tunneled packets without the use of iptables.
Signed-off-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Steffen Klassert says:
====================
pull request (net): ipsec 2017-03-06
1) Fix lockdep splat on xfrm policy subsystem initialization.
From Florian Westphal.
2) When using socket policies on IPv4-mapped IPv6 addresses,
we access the flow informations of the wrong address family
what leads to an out of bounds access. Fix this by using
the family we get with the dst_entry, like we do it for the
standard policy lookup.
3) vti6 can report a PMTU below IPV6_MIN_MTU. Fix this by
adding a check for that before sending a ICMPV6_PKT_TOOBIG
message.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Align vti6 with vti by returning GRE_KEY flag. This enables iproute2
to display tunnel keys on "ip -6 tunnel show"
Signed-off-by: David Forster <dforster@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In vti6_xmit(), the check for IPV6_MIN_MTU before we
send a ICMPV6_PKT_TOOBIG message is missing. So we might
report a PMTU below 1280. Fix this by adding the required
check.
Fixes: ccd740cbc6e ("vti6: Add pmtu handling to vti6_xmit.")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Signed-off-by: Felix Jia <felix.jia@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
vti6 interface is registered before the rtnl_link_ops block
is attached. As a result the resulting RTM_NEWLINK is missing
IFLA_INFO_KIND. Re-order attachment of rtnl_link_ops block to fix.
Signed-off-by: Dave Forster <dforster@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Couple conflicts resolved here:
1) In the MACB driver, a bug fix to properly initialize the
RX tail pointer properly overlapped with some changes
to support variable sized rings.
2) In XGBE we had a "CONFIG_PM" --> "CONFIG_PM_SLEEP" fix
overlapping with a reorganization of the driver to support
ACPI, OF, as well as PCI variants of the chip.
3) In 'net' we had several probe error path bug fixes to the
stmmac driver, meanwhile a lot of this code was cleaned up
and reorganized in 'net-next'.
4) The cls_flower classifier obtained a helper function in
'net-next' called __fl_delete() and this overlapped with
Daniel Borkamann's bug fix to use RCU for object destruction
in 'net'. It also overlapped with Jiri's change to guard
the rhashtable_remove_fast() call with a check against
tc_skip_sw().
5) In mlx4, a revert bug fix in 'net' overlapped with some
unrelated changes in 'net-next'.
6) In geneve, a stale header pointer after pskb_expand_head()
bug fix in 'net' overlapped with a large reorganization of
the same code in 'net-next'. Since the 'net-next' code no
longer had the bug in question, there was nothing to do
other than to simply take the 'net-next' hunks.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make struct pernet_operations::id unsigned.
There are 2 reasons to do so:
1)
This field is really an index into an zero based array and
thus is unsigned entity. Using negative value is out-of-bound
access by definition.
2)
On x86_64 unsigned 32-bit data which are mixed with pointers
via array indexing or offsets added or subtracted to pointers
are preffered to signed 32-bit data.
"int" being used as an array index needs to be sign-extended
to 64-bit before being used.
void f(long *p, int i)
{
g(p[i]);
}
roughly translates to
movsx rsi, esi
mov rdi, [rsi+...]
call g
MOVSX is 3 byte instruction which isn't necessary if the variable is
unsigned because x86_64 is zero extending by default.
Now, there is net_generic() function which, you guessed it right, uses
"int" as an array index:
static inline void *net_generic(const struct net *net, int id)
{
...
ptr = ng->ptr[id - 1];
...
}
And this function is used a lot, so those sign extensions add up.
Patch snipes ~1730 bytes on allyesconfig kernel (without all junk
messing with code generation):
add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730)
Unfortunately some functions actually grow bigger.
This is a semmingly random artefact of code generation with register
allocator being used differently. gcc decides that some variable
needs to live in new r8+ registers and every access now requires REX
prefix. Or it is shifted into r12, so [r12+0] addressing mode has to be
used which is longer than [r8]
However, overall balance is in negative direction:
add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730)
function old new delta
nfsd4_lock 3886 3959 +73
tipc_link_build_proto_msg 1096 1140 +44
mac80211_hwsim_new_radio 2776 2808 +32
tipc_mon_rcv 1032 1058 +26
svcauth_gss_legacy_init 1413 1429 +16
tipc_bcbase_select_primary 379 392 +13
nfsd4_exchange_id 1247 1260 +13
nfsd4_setclientid_confirm 782 793 +11
...
put_client_renew_locked 494 480 -14
ip_set_sockfn_get 730 716 -14
geneve_sock_add 829 813 -16
nfsd4_sequence_done 721 703 -18
nlmclnt_lookup_host 708 686 -22
nfsd4_lockt 1085 1063 -22
nfs_get_client 1077 1050 -27
tcf_bpf_init 1106 1076 -30
nfsd4_encode_fattr 5997 5930 -67
Total: Before=154856051, After=154854321, chg -0.00%
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
- Use the UID in routing lookups made by protocol connect() and
sendmsg() functions.
- Make sure that routing lookups triggered by incoming packets
(e.g., Path MTU discovery) take the UID of the socket into
account.
- For packets not associated with a userspace socket, (e.g., ping
replies) use UID 0 inside the user namespace corresponding to
the network namespace the socket belongs to. This allows
all namespaces to apply routing and iptables rules to
kernel-originated traffic in that namespaces by matching UID 0.
This is better than using the UID of the kernel socket that is
sending the traffic, because the UID of kernel sockets created
at namespace creation time (e.g., the per-processor ICMP and
TCP sockets) is the UID of the user that created the socket,
which might not be mapped in the namespace.
Tested: compiles allnoconfig, allyesconfig, allmodconfig
Tested: https://android-review.googlesource.com/253302
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ipv4/ip_tunnel:
- min_mtu = 68, max_mtu = 0xFFF8 - dev->hard_header_len - t_hlen
- preserve all ndo_change_mtu checks for now to prevent regressions
ipv6/ip6_tunnel:
- min_mtu = 68, max_mtu = 0xFFF8 - dev->hard_header_len
- preserve all ndo_change_mtu checks for now to prevent regressions
ipv6/ip6_vti:
- min_mtu = 1280, max_mtu = 65535
- remove redundant vti6_change_mtu
ipv6/sit:
- min_mtu = 1280, max_mtu = 0xFFF8 - t_hlen
- remove redundant ipip6_tunnel_change_mtu
CC: netdev@vger.kernel.org
CC: "David S. Miller" <davem@davemloft.net>
CC: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
CC: James Morris <jmorris@namei.org>
CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
CC: Patrick McHardy <kaber@trash.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is the same fix than commit a5d0dc810abf ("vti: flush x-netns xfrm
cache when vti interface is removed")
This patch fixes a refcnt problem when a x-netns vti6 interface is removed:
unregister_netdevice: waiting for vti6_test to become free. Usage count = 1
Here is a script to reproduce the problem:
ip link set dev ntfp2 up
ip addr add dev ntfp2 2001::1/64
ip link add vti6_test type vti6 local 2001::1 remote 2001::2 key 1
ip netns add secure
ip link set vti6_test netns secure
ip netns exec secure ip link set vti6_test up
ip netns exec secure ip link s lo up
ip netns exec secure ip addr add dev vti6_test 2003::1/64
ip -6 xfrm policy add dir out tmpl src 2001::1 dst 2001::2 proto esp \
mode tunnel mark 1
ip -6 xfrm policy add dir in tmpl src 2001::2 dst 2001::1 proto esp \
mode tunnel mark 1
ip xfrm state add src 2001::1 dst 2001::2 proto esp spi 1 mode tunnel \
enc des3_ede 0x112233445566778811223344556677881122334455667788 mark 1
ip xfrm state add src 2001::2 dst 2001::1 proto esp spi 1 mode tunnel \
enc des3_ede 0x112233445566778811223344556677881122334455667788 mark 1
ip netns exec secure ping6 -c 4 2003::2
ip netns del secure
CC: Lance Richardson <lrichard@redhat.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Lance Richardson <lrichard@redhat.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
|
|
Since commit 1625f4529957, vti6 is broken, all input packets are dropped
(LINUX_MIB_XFRMINNOSTATES is incremented).
XFRM_TUNNEL_SKB_CB(skb)->tunnel.ip6 is set by vti6_rcv() before calling
xfrm6_rcv()/xfrm6_rcv_spi(), thus we cannot set to NULL that value in
xfrm6_rcv_spi().
A new function xfrm6_rcv_tnl() that enables to pass a value to
xfrm6_rcv_spi() is added, so that xfrm6_rcv() is not touched (this function
is used in several handlers).
CC: Alexey Kodanev <alexey.kodanev@oracle.com>
Fixes: 1625f4529957 ("net/xfrm_input: fix possible NULL deref of tunnel.ip6->parms.i_key")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
In case of inter address family tunneling (IPv6 over vti4 or IPv4 over
vti6), the inbound policy checks in vti_rcv_cb() and vti6_rcv_cb() are
using the wrong address family. As a result, all inbound inter address
family traffic is dropped.
Use the xfrm_ip2inner_mode() helper, as done in xfrm_input() (i.e., also
increment LINUX_MIB_XFRMINSTATEMODEERROR in case of error), to select the
inner_mode that contains the right address family for the inbound policy
checks.
Signed-off-by: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This is a preparatory patch for converting qdisc linked list into a
hashtable. As we'll need to include hashtable.h in netdevice.h, we first
have to make sure that this will not introduce symbol conflicts for any of
the netdevice.h users.
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This also fix a potential race into the existing tunnel code, which
could lead to the wrong dst to be permanenty cached:
CPU1: CPU2:
<xmit on ip6_tunnel>
<cache lookup fails>
dst = ip6_route_output(...)
<tunnel params are changed via nl>
dst_cache_reset() // no effect,
// the cache is empty
dst_cache_set() // the wrong dst
// is permanenty stored
// into the cache
With the new dst implementation the above race is not possible
since the first cache lookup after dst_cache_reset will fail due
to the timestamp check
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Suggested-and-acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace dst_output_okfn with dst_output
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a sock paramter to dst_output making dst_output_sk superfluous.
Add a skb->sk parameter to all of the callers of dst_output
Have the callers of dst_output_sk call dst_output.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We currently rely on the PMTU discovery of xfrm.
However if a packet is localy sent, the PMTU mechanism
of xfrm tries to to local socket notification what
might not work for applications like ping that don't
check for this. So add pmtu handling to vti6_xmit to
report MTU changes immediately.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The vti6_rcv_cb and vti_rcv_cb calls were leaving the skb->mark modified
after completing the function. This resulted in the original skb->mark
value being lost. Since we only need skb->mark to be set for
xfrm_policy_check we can pull the assignment into the rcv_cb calls and then
just restore the original mark after xfrm_policy_check has been completed.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Instead of modifying skb->mark we can simply modify the flowi_mark that is
generated as a result of the xfrm_decode_session. By doing this we don't
need to actually touch the skb->mark and it can be preserved as it passes
out through the tunnel.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
Willem de Bruijn
Eric Dumazet
Alexey Kodanev
Haishuang Yan
Eyal Birger
David S. Miller
Sun Lianwen
Stefano Brivio
Kirill Tkhai
David Ahern
Nicolas Dichtel
Florian Westphal
Matthias Schiffer
Craig Gallek
David Forster
Steffen Klassert
Felix Jia
Alexey Dobriyan
Lorenzo Colitti
Jarod Wilson
thomas.zeitlhofer+lkml@ze-it.at
Jiri Kosina
Paolo Abeni
Eric W. Biederman
Alexander Duyck