aboutsummaryrefslogtreecommitdiffstats
path: root/net/rxrpc (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-09-19rxrpc: remove rxrpc_max_call_lifetime declarationGaosheng Cui1-1/+0
rxrpc_max_call_lifetime has been removed since commit a158bdd3247b ("rxrpc: Fix call timeouts"), so remove it. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Link: https://lore.kernel.org/r/20220909064042.1149404-1-cuigaosheng1@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-01rxrpc: Remove rxrpc_get_reply_time() which is no longer usedDavid Howells1-43/+0
Remove rxrpc_get_reply_time() as that is no longer used now that the call issue time is used instead of the reply time. Signed-off-by: David Howells <dhowells@redhat.com>
2022-09-01rxrpc: Fix calc of resend ageDavid Howells1-1/+1
Fix the calculation of the resend age to add a microsecond value as microseconds, not nanoseconds. Signed-off-by: David Howells <dhowells@redhat.com>
2022-09-01rxrpc: Fix local destruction being repeatedDavid Howells1-0/+3
If the local processor work item for the rxrpc local endpoint gets requeued by an event (such as an incoming packet) between it getting scheduled for destruction and the UDP socket being closed, the rxrpc_local_destroyer() function can get run twice. The second time it can hang because it can end up waiting for cleanup events that will never happen. Signed-off-by: David Howells <dhowells@redhat.com>
2022-09-01rxrpc: Fix an insufficiently large sglist in rxkad_verify_packet_2()David Howells1-1/+1
rxkad_verify_packet_2() has a small stack-allocated sglist of 4 elements, but if that isn't sufficient for the number of fragments in the socket buffer, we try to allocate an sglist large enough to hold all the fragments. However, for large packets with a lot of fragments, this isn't sufficient and we need at least one additional fragment. The problem manifests as skb_to_sgvec() returning -EMSGSIZE and this then getting returned by userspace. Most of the time, this isn't a problem as rxrpc sets a limit of 5692, big enough for 4 jumbo subpackets to be glued together; occasionally, however, the server will ignore the reported limit and give a packet that's a lot bigger - say 19852 bytes with ->nr_frags being 7. skb_to_sgvec() then tries to return a "zeroth" fragment that seems to occur before the fragments counted by ->nr_frags and we hit the end of the sglist too early. Note that __skb_to_sgvec() also has an skb_walk_frags() loop that is recursive up to 24 deep. I'm not sure if I need to take account of that too - or if there's an easy way of counting those frags too. Fix this by counting an extra frag and allocating a larger sglist based on that. Fixes: d0d5c0cd1e71 ("rxrpc: Use skb_unshare() rather than skb_cow_data()") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-afs@lists.infradead.org
2022-09-01rxrpc: Fix ICMP/ICMP6 error handlingDavid Howells3-37/+258
Because rxrpc pretends to be a tunnel on top of a UDP/UDP6 socket, allowing it to siphon off UDP packets early in the handling of received UDP packets thereby avoiding the packet going through the UDP receive queue, it doesn't get ICMP packets through the UDP ->sk_error_report() callback. In fact, it doesn't appear that there's any usable option for getting hold of ICMP packets. Fix this by adding a new UDP encap hook to distribute error messages for UDP tunnels. If the hook is set, then the tunnel driver will be able to see ICMP packets. The hook provides the offset into the packet of the UDP header of the original packet that caused the notification. An alternative would be to call the ->error_handler() hook - but that requires that the skbuff be cloned (as ip_icmp_error() or ipv6_cmp_error() do, though isn't really necessary or desirable in rxrpc's case is we want to parse them there and then, not queue them). Changes ======= ver #3) - Fixed an uninitialised variable. ver #2) - Fixed some missing CONFIG_AF_RXRPC_IPV6 conditionals. Fixes: 5271953cad31 ("rxrpc: Use the UDP encap_rcv hook") Signed-off-by: David Howells <dhowells@redhat.com>
2022-08-25rxrpc: Fix locking in rxrpc's sendmsgDavid Howells2-39/+57
Fix three bugs in the rxrpc's sendmsg implementation: (1) rxrpc_new_client_call() should release the socket lock when returning an error from rxrpc_get_call_slot(). (2) rxrpc_wait_for_tx_window_intr() will return without the call mutex held in the event that we're interrupted by a signal whilst waiting for tx space on the socket or relocking the call mutex afterwards. Fix this by: (a) moving the unlock/lock of the call mutex up to rxrpc_send_data() such that the lock is not held around all of rxrpc_wait_for_tx_window*() and (b) indicating to higher callers whether we're return with the lock dropped. Note that this means recvmsg() will not block on this call whilst we're waiting. (3) After dropping and regaining the call mutex, rxrpc_send_data() needs to go and recheck the state of the tx_pending buffer and the tx_total_len check in case we raced with another sendmsg() on the same call. Thinking on this some more, it might make sense to have different locks for sendmsg() and recvmsg(). There's probably no need to make recvmsg() wait for sendmsg(). It does mean that recvmsg() can return MSG_EOR indicating that a call is dead before a sendmsg() to that call returns - but that can currently happen anyway. Without fix (2), something like the following can be induced: WARNING: bad unlock balance detected! 5.16.0-rc6-syzkaller #0 Not tainted ------------------------------------- syz-executor011/3597 is trying to release lock (&call->user_mutex) at: [<ffffffff885163a3>] rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748 but there are no more locks to release! other info that might help us debug this: no locks held by syz-executor011/3597. ... Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_unlock_imbalance_bug include/trace/events/lock.h:58 [inline] __lock_release kernel/locking/lockdep.c:5306 [inline] lock_release.cold+0x49/0x4e kernel/locking/lockdep.c:5657 __mutex_unlock_slowpath+0x99/0x5e0 kernel/locking/mutex.c:900 rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748 rxrpc_sendmsg+0x420/0x630 net/rxrpc/af_rxrpc.c:561 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae [Thanks to Hawkins Jiawei and Khalid Masum for their attempts to fix this] Fixes: bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals") Reported-by: syzbot+7f0483225d0c94cb3441@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Tested-by: syzbot+7f0483225d0c94cb3441@syzkaller.appspotmail.com cc: Hawkins Jiawei <yin31149@gmail.com> cc: Khalid Masum <khalid.masum.92@gmail.com> cc: Dan Carpenter <dan.carpenter@oracle.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/166135894583.600315.7170979436768124075.stgit@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-25net: delete extra space and tab in blank lineWilliam Dean1-1/+1
delete extra space and tab in blank line, there is no functional change. Reported-by: Hacash Robot <hacashRobot@santino.com> Signed-off-by: William Dean <williamsukatube@gmail.com> Link: https://lore.kernel.org/r/20220723073222.2961602-1-williamsukatube@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-08net: rxrpc: fix clang -Wformat warningJustin Stitt1-1/+1
When building with Clang we encounter this warning: | net/rxrpc/rxkad.c:434:33: error: format specifies type 'unsigned short' | but the argument has type 'u32' (aka 'unsigned int') [-Werror,-Wformat] | _leave(" = %d [set %hx]", ret, y); y is a u32 but the format specifier is `%hx`. Going from unsigned int to short int results in a loss of data. This is surely not intended behavior. If it is intended, the warning should be suppressed through other means. This patch should get us closer to the goal of enabling the -Wformat flag for Clang builds. Link: https://github.com/ClangBuiltLinux/linux/issues/378 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Acked-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20220707182052.769989-1-justinstitt@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski6-33/+46
drivers/net/ethernet/cadence/macb_main.c 5cebb40bc955 ("net: macb: Fix PTP one step sync support") 138badbc21a0 ("net: macb: use NAPI for TX completion path") https://lore.kernel.org/all/20220523111021.31489367@canb.auug.org.au/ net/smc/af_smc.c 75c1edf23b95 ("net/smc: postpone sk_refcnt increment in connect()") 3aba103006bc ("net/smc: align the connect behaviour with TCP") https://lore.kernel.org/all/20220524114408.4bf1af38@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-22rxrpc: Fix decision on when to generate an IDLE ACKDavid Howells4-16/+25
Fix the decision on when to generate an IDLE ACK by keeping a count of the number of packets we've received, but not yet soft-ACK'd, and the number of packets we've processed, but not yet hard-ACK'd, rather than trying to keep track of which DATA sequence numbers correspond to those points. We then generate an ACK when either counter exceeds 2. The counters are both cleared when we transcribe the information into any sort of ACK packet for transmission. IDLE and DELAY ACKs are skipped if both counters are 0 (ie. no change). Fixes: 805b21b929e2 ("rxrpc: Send an ACK after every few DATA packets we receive") Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22rxrpc: Don't let ack.previousPacket regressDavid Howells3-4/+6
The previousPacket field in the rx ACK packet should never go backwards - it's now the highest DATA sequence number received, not the last on received (it used to be used for out of sequence detection). Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code") Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22rxrpc: Fix overlapping ACK accountingDavid Howells2-11/+12
Fix accidental overlapping of Rx-phase ACK accounting with Tx-phase ACK accounting through variables shared between the two. call->acks_* members refer to ACKs received in the Tx phase and call->ackr_* members to ACKs sent/to be sent during the Rx phase. Fixes: 1a2391c30c0b ("rxrpc: Fix detection of out of order acks") Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22rxrpc: Don't try to resend the request if we're receiving the replyDavid Howells1-1/+2
rxrpc has a timer to trigger resending of unacked data packets in a call. This is not cancelled when a client call switches to the receive phase on the basis that most calls don't last long enough for it to ever expire. However, if it *does* expire after we've started to receive the reply, we shouldn't then go into trying to retransmit or pinging the server to find out if an ack got lost. Fix this by skipping the resend code if we're into receiving the reply to a client call. Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-afs@lists.infradead.org Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22rxrpc: Fix listen() setting the bar too high for the prealloc ringsDavid Howells1-2/+2
AF_RXRPC's listen() handler lets you set the backlog up to 32 (if you bump up the sysctl), but whilst the preallocation circular buffers have 32 slots in them, one of them has to be a dead slot because we're using CIRC_CNT(). This means that listen(rxrpc_sock, 32) will cause an oops when the socket is closed because rxrpc_service_prealloc_one() allocated one too many calls and rxrpc_discard_prealloc() won't then be able to get rid of them because it'll think the ring is empty. rxrpc_release_calls_on_socket() then tries to abort them, but oopses because call->peer isn't yet set. Fix this by setting the maximum backlog to RXRPC_BACKLOG_MAX - 1 to match the ring capacity. BUG: kernel NULL pointer dereference, address: 0000000000000086 ... RIP: 0010:rxrpc_send_abort_packet+0x73/0x240 [rxrpc] Call Trace: <TASK> ? __wake_up_common_lock+0x7a/0x90 ? rxrpc_notify_socket+0x8e/0x140 [rxrpc] ? rxrpc_abort_call+0x4c/0x60 [rxrpc] rxrpc_release_calls_on_socket+0x107/0x1a0 [rxrpc] rxrpc_release+0xc9/0x1c0 [rxrpc] __sock_release+0x37/0xa0 sock_close+0x11/0x20 __fput+0x89/0x240 task_work_run+0x59/0x90 do_exit+0x319/0xaa0 Fixes: 00e907127e6f ("rxrpc: Preallocate peers, conns and calls for incoming service requests") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-afs@lists.infradead.org Link: https://lists.infradead.org/pipermail/linux-afs/2022-March/005079.html Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22afs: Adjust ACK interpretation to try and cope with NATDavid Howells1-0/+27
If a client's address changes, say if it is NAT'd, this can disrupt an in progress operation. For most operations, this is not much of a problem, but StoreData can be different as some servers modify the target file as the data comes in, so if a store request is disrupted, the file can get corrupted on the server. The problem is that the server doesn't recognise packets that come after the change of address as belonging to the original client and will bounce them, either by sending an OUT_OF_SEQUENCE ACK to the apparent new call if the packet number falls within the initial sequence number window of a call or by sending an EXCEEDS_WINDOW ACK if it falls outside and then aborting it. In both cases, firstPacket will be 1 and previousPacket will be 0 in the ACK information. Fix this by the following means: (1) If a client call receives an EXCEEDS_WINDOW ACK with firstPacket as 1 and previousPacket as 0, assume this indicates that the server saw the incoming packets from a different peer and thus as a different call. Fail the call with error -ENETRESET. (2) Also fail the call if a similar OUT_OF_SEQUENCE ACK occurs if the first packet has been hard-ACK'd. If it hasn't been hard-ACK'd, the ACK packet will cause it to get retransmitted, so the call will just be repeated. (3) Make afs_select_fileserver() treat -ENETRESET as a straight fail of the operation. (4) Prioritise the error code over things like -ECONNRESET as the server did actually respond. (5) Make writeback treat -ENETRESET as a retryable error and make it redirty all the pages involved in a write so that the VM will retry. Note that there is still a circumstance that I can't easily deal with: if the operation is fully received and processed by the server, but the reply is lost due to address change. There's no way to know if the op happened. We can examine the server, but a conflicting change could have been made by a third party - and we can't tell the difference. In such a case, a message like: kAFS: vnode modified {100058:146266} b7->b8 YFS.StoreData64 (op=2646a) will be logged to dmesg on the next op to touch the file and the client will reset the inode state, including invalidating clean parts of the pagecache. Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-afs@lists.infradead.org Link: http://lists.infradead.org/pipermail/linux-afs/2021-December/004811.html # v1 Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22rxrpc, afs: Fix selection of abort codesDavid Howells2-3/+3
The RX_USER_ABORT code should really only be used to indicate that the user of the rxrpc service (ie. userspace) implicitly caused a call to be aborted - for instance if the AF_RXRPC socket is closed whilst the call was in progress. (The user may also explicitly abort a call and specify the abort code to use). Change some of the points of generation to use other abort codes instead: (1) Abort the call with RXGEN_SS_UNMARSHAL or RXGEN_CC_UNMARSHAL if we see ENOMEM and EFAULT during received data delivery and abort with RX_CALL_DEAD in the default case. (2) Abort with RXGEN_SS_MARSHAL if we get ENOMEM whilst trying to send a reply. (3) Abort with RX_CALL_DEAD if we stop hearing from the peer if we had heard from the peer and abort with RX_CALL_TIMEOUT if we hadn't. (4) Abort with RX_CALL_DEAD if we try to disconnect a call that's not completed successfully or been aborted. Reported-by: Jeffrey Altman <jaltman@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22rxrpc: Return an error to sendmsg if call failedDavid Howells1-0/+6
If at the end of rxrpc sendmsg() or rxrpc_kernel_send_data() the call that was being given data was aborted remotely or otherwise failed, return an error rather than returning the amount of data buffered for transmission. The call (presumably) did not complete, so there's not much point continuing with it. AF_RXRPC considers it "complete" and so will be unwilling to do anything else with it - and won't send a notification for it, deeming the return from sendmsg sufficient. Not returning an error causes afs to incorrectly handle a StoreData operation that gets interrupted by a change of address due to NAT reconfiguration. This doesn't normally affect most operations since their request parameters tend to fit into a single UDP packet and afs_make_call() returns before the server responds; StoreData is different as it involves transmission of a lot of data. This can be triggered on a client by doing something like: dd if=/dev/zero of=/afs/example.com/foo bs=1M count=512 at one prompt, and then changing the network address at another prompt, e.g.: ifconfig enp6s0 inet 192.168.6.2 && route add 192.168.6.1 dev enp6s0 Tracing packets on an Auristor fileserver looks something like: 192.168.6.1 -> 192.168.6.3 RX 107 ACK Idle Seq: 0 Call: 4 Source Port: 7000 Destination Port: 7001 192.168.6.3 -> 192.168.6.1 AFS (RX) 1482 FS Request: Unknown(64538) (64538) 192.168.6.3 -> 192.168.6.1 AFS (RX) 1482 FS Request: Unknown(64538) (64538) 192.168.6.1 -> 192.168.6.3 RX 107 ACK Idle Seq: 0 Call: 4 Source Port: 7000 Destination Port: 7001 <ARP exchange for 192.168.6.2> 192.168.6.2 -> 192.168.6.1 AFS (RX) 1482 FS Request: Unknown(0) (0) 192.168.6.2 -> 192.168.6.1 AFS (RX) 1482 FS Request: Unknown(0) (0) 192.168.6.1 -> 192.168.6.2 RX 107 ACK Exceeds Window Seq: 0 Call: 4 Source Port: 7000 Destination Port: 7001 192.168.6.1 -> 192.168.6.2 RX 74 ABORT Seq: 0 Call: 4 Source Port: 7000 Destination Port: 7001 192.168.6.1 -> 192.168.6.2 RX 74 ABORT Seq: 29321 Call: 4 Source Port: 7000 Destination Port: 7001 The Auristor fileserver logs code -453 (RXGEN_SS_UNMARSHAL), but the abort code received by kafs is -5 (RX_PROTOCOL_ERROR) as the rx layer sees the condition and generates an abort first and the unmarshal error is a consequence of that at the application layer. Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-afs@lists.infradead.org Link: http://lists.infradead.org/pipermail/linux-afs/2021-December/004810.html # v1 Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22rxrpc: Fix locking issueDavid Howells5-22/+16
There's a locking issue with the per-netns list of calls in rxrpc. The pieces of code that add and remove a call from the list use write_lock() and the calls procfile uses read_lock() to access it. However, the timer callback function may trigger a removal by trying to queue a call for processing and finding that it's already queued - at which point it has a spare refcount that it has to do something with. Unfortunately, if it puts the call and this reduces the refcount to 0, the call will be removed from the list. Unfortunately, since the _bh variants of the locking functions aren't used, this can deadlock. ================================ WARNING: inconsistent lock state 5.18.0-rc3-build4+ #10 Not tainted -------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. ksoftirqd/2/25 [HC0[0]:SC1[1]:HE1:SE0] takes: ffff888107ac4038 (&rxnet->call_lock){+.?.}-{2:2}, at: rxrpc_put_call+0x103/0x14b {SOFTIRQ-ON-W} state was registered at: ... Possible unsafe locking scenario: CPU0 ---- lock(&rxnet->call_lock); <Interrupt> lock(&rxnet->call_lock); *** DEADLOCK *** 1 lock held by ksoftirqd/2/25: #0: ffff8881008ffdb0 ((&call->timer)){+.-.}-{0:0}, at: call_timer_fn+0x5/0x23d Changes ======= ver #2) - Changed to using list_next_rcu() rather than rcu_dereference() directly. Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22rxrpc: Use refcount_t rather than atomic_tDavid Howells12-121/+118
Move to using refcount_t rather than atomic_t for refcounts in rxrpc. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22rxrpc: Allow list of in-use local UDP endpoints to be viewed in /procDavid Howells4-22/+94
Allow the list of in-use local UDP endpoints in the current network namespace to be viewed in /proc. To aid with this, the endpoint list is converted to an hlist and RCU-safe manipulation is used so that the list can be read with only the RCU read lock held. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30rxrpc: Enable IPv6 checksums on transport socketDavid Howells1-0/+3
AF_RXRPC doesn't currently enable IPv6 UDP Tx checksums on the transport socket it opens and the checksums in the packets it generates end up 0. It probably should also enable IPv6 UDP Rx checksums and IPv4 UDP checksums. The latter only seem to be applied if the socket family is AF_INET and don't seem to apply if it's AF_INET6. IPv4 packets from an IPv6 socket seem to have checksums anyway. What seems to have happened is that the inet_inv_convert_csum() call didn't get converted to the appropriate udp_port_cfg parameters - and udp_sock_create() disables checksums unless explicitly told not too. Fix this by enabling the three udp_port_cfg checksum options. Fixes: 1a9b86c9fd95 ("rxrpc: use udp tunnel APIs instead of open code in rxrpc_open_socket") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> cc: Vadim Fedorenko <vfedorenko@novek.ru> cc: David S. Miller <davem@davemloft.net> cc: linux-afs@lists.infradead.org Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15rxrpc: Restore removed timer deletionDavid Howells1-0/+2
A recent patch[1] from Eric Dumazet flipped the order in which the keepalive timer and the keepalive worker were cancelled in order to fix a syzbot reported issue[2]. Unfortunately, this enables the mirror image bug whereby the timer races with rxrpc_exit_net(), restarting the worker after it has been cancelled: CPU 1 CPU 2 =============== ===================== if (rxnet->live) <INTERRUPT> rxnet->live = false; cancel_work_sync(&rxnet->peer_keepalive_work); rxrpc_queue_work(&rxnet->peer_keepalive_work); del_timer_sync(&rxnet->peer_keepalive_timer); Fix this by restoring the removed del_timer_sync() so that we try to remove the timer twice. If the timer runs again, it should see ->live == false and not restart the worker. Fixes: 1946014ca3b1 ("rxrpc: fix a race in rxrpc_exit_net()") Signed-off-by: David Howells <dhowells@redhat.com> cc: Eric Dumazet <edumazet@google.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/20220404183439.3537837-1-eric.dumazet@gmail.com/ [1] Link: https://syzkaller.appspot.com/bug?extid=724378c4bb58f703b09a [2] Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-06rxrpc: fix a race in rxrpc_exit_net()Eric Dumazet1-1/+1
Current code can lead to the following race: CPU0 CPU1 rxrpc_exit_net() rxrpc_peer_keepalive_worker() if (rxnet->live) rxnet->live = false; del_timer_sync(&rxnet->peer_keepalive_timer); timer_reduce(&rxnet->peer_keepalive_timer, jiffies + delay); cancel_work_sync(&rxnet->peer_keepalive_work); rxrpc_exit_net() exits while peer_keepalive_timer is still armed, leading to use-after-free. syzbot report was: ODEBUG: free active (active state 0) object type: timer_list hint: rxrpc_peer_keepalive_timeout+0x0/0xb0 WARNING: CPU: 0 PID: 3660 at lib/debugobjects.c:505 debug_print_object+0x16e/0x250 lib/debugobjects.c:505 Modules linked in: CPU: 0 PID: 3660 Comm: kworker/u4:6 Not tainted 5.17.0-syzkaller-13993-g88e6c0207623 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:505 Code: ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 af 00 00 00 48 8b 14 dd 00 1c 26 8a 4c 89 ee 48 c7 c7 00 10 26 8a e8 b1 e7 28 05 <0f> 0b 83 05 15 eb c5 09 01 48 83 c4 18 5b 5d 41 5c 41 5d 41 5e c3 RSP: 0018:ffffc9000353fb00 EFLAGS: 00010082 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000 RDX: ffff888029196140 RSI: ffffffff815efad8 RDI: fffff520006a7f52 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815ea4ae R11: 0000000000000000 R12: ffffffff89ce23e0 R13: ffffffff8a2614e0 R14: ffffffff816628c0 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe1f2908924 CR3: 0000000043720000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __debug_check_no_obj_freed lib/debugobjects.c:992 [inline] debug_check_no_obj_freed+0x301/0x420 lib/debugobjects.c:1023 kfree+0xd6/0x310 mm/slab.c:3809 ops_free_list.part.0+0x119/0x370 net/core/net_namespace.c:176 ops_free_list net/core/net_namespace.c:174 [inline] cleanup_net+0x591/0xb00 net/core/net_namespace.c:598 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298 </TASK> Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Howells <dhowells@redhat.com> Cc: Marc Dionne <marc.dionne@auristor.com> Cc: linux-afs@lists.infradead.org Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-31rxrpc: fix some null-ptr-deref bugs in server_key.cXiaolong Huang1-2/+5
Some function calls are not implemented in rxrpc_no_security, there are preparse_server_key, free_preparse_server_key and destroy_server_key. When rxrpc security type is rxrpc_no_security, user can easily trigger a null-ptr-deref bug via ioctl. So judgment should be added to prevent it The crash log: user@syzkaller:~$ ./rxrpc_preparse_s [ 37.956878][T15626] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 37.957645][T15626] #PF: supervisor instruction fetch in kernel mode [ 37.958229][T15626] #PF: error_code(0x0010) - not-present page [ 37.958762][T15626] PGD 4aadf067 P4D 4aadf067 PUD 4aade067 PMD 0 [ 37.959321][T15626] Oops: 0010 [#1] PREEMPT SMP [ 37.959739][T15626] CPU: 0 PID: 15626 Comm: rxrpc_preparse_ Not tainted 5.17.0-01442-gb47d5a4f6b8d #43 [ 37.960588][T15626] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 [ 37.961474][T15626] RIP: 0010:0x0 [ 37.961787][T15626] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [ 37.962480][T15626] RSP: 0018:ffffc9000d9abdc0 EFLAGS: 00010286 [ 37.963018][T15626] RAX: ffffffff84335200 RBX: ffff888012a1ce80 RCX: 0000000000000000 [ 37.963727][T15626] RDX: 0000000000000000 RSI: ffffffff84a736dc RDI: ffffc9000d9abe48 [ 37.964425][T15626] RBP: ffffc9000d9abe48 R08: 0000000000000000 R09: 0000000000000002 [ 37.965118][T15626] R10: 000000000000000a R11: f000000000000000 R12: ffff888013145680 [ 37.965836][T15626] R13: 0000000000000000 R14: ffffffffffffffec R15: ffff8880432aba80 [ 37.966441][T15626] FS: 00007f2177907700(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 [ 37.966979][T15626] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 37.967384][T15626] CR2: ffffffffffffffd6 CR3: 000000004aaf1000 CR4: 00000000000006f0 [ 37.967864][T15626] Call Trace: [ 37.968062][T15626] <TASK> [ 37.968240][T15626] rxrpc_preparse_s+0x59/0x90 [ 37.968541][T15626] key_create_or_update+0x174/0x510 [ 37.968863][T15626] __x64_sys_add_key+0x139/0x1d0 [ 37.969165][T15626] do_syscall_64+0x35/0xb0 [ 37.969451][T15626] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 37.969824][T15626] RIP: 0033:0x43a1f9 Signed-off-by: Xiaolong Huang <butterflyhuangxx@gmail.com> Tested-by: Xiaolong Huang <butterflyhuangxx@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: http://lists.infradead.org/pipermail/linux-afs/2022-March/005069.html Fixes: 12da59fcab5a ("rxrpc: Hand server key parsing off to the security class") Link: https://lore.kernel.org/r/164865013439.2941502.8966285221215590921.stgit@warthog.procyon.org.uk Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-31rxrpc: Fix call timer start racing with call destructionDavid Howells3-14/+43
The rxrpc_call struct has a timer used to handle various timed events relating to a call. This timer can get started from the packet input routines that are run in softirq mode with just the RCU read lock held. Unfortunately, because only the RCU read lock is held - and neither ref or other lock is taken - the call can start getting destroyed at the same time a packet comes in addressed to that call. This causes the timer - which was already stopped - to get restarted. Later, the timer dispatch code may then oops if the timer got deallocated first. Fix this by trying to take a ref on the rxrpc_call struct and, if successful, passing that ref along to the timer. If the timer was already running, the ref is discarded. The timer completion routine can then pass the ref along to the call's work item when it queues it. If the timer or work item where already queued/running, the extra ref is discarded. Fixes: a158bdd3247b ("rxrpc: Fix call timeouts") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Tested-by: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: http://lists.infradead.org/pipermail/linux-afs/2022-March/005073.html Link: https://lore.kernel.org/r/164865115696.2943015.11097991776647323586.stgit@warthog.procyon.org.uk Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-01-22rxrpc: Adjust retransmission backoffDavid Howells2-6/+4
Improve retransmission backoff by only backing off when we retransmit data packets rather than when we set the lost ack timer. To this end: (1) In rxrpc_resend(), use rxrpc_get_rto_backoff() when setting the retransmission timer and only tell it that we are retransmitting if we actually have things to retransmit. Note that it's possible for the retransmission algorithm to race with the processing of a received ACK, so we may see no packets needing retransmission. (2) In rxrpc_send_data_packet(), don't bump the backoff when setting the ack_lost_at timer, as it may then get bumped twice. With this, when looking at one particular packet, the retransmission intervals were seen to be 1.5ms, 2ms, 3ms, 5ms, 9ms, 17ms, 33ms, 71ms, 136ms, 264ms, 544ms, 1.088s, 2.1s, 4.2s and 8.3s. Fixes: c410bf01933e ("rxrpc: Fix the excessive initial retransmission timeout") Suggested-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Tested-by: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/164138117069.2023386.17446904856843997127.stgit@warthog.procyon.org.uk/ Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29rxrpc: Fix rxrpc_local leak in rxrpc_lookup_peer()Eiichi Tsukata1-5/+9
Need to call rxrpc_put_local() for peer candidate before kfree() as it holds a ref to rxrpc_local. [DH: v2: Changed to abstract the peer freeing code out into a function] Fixes: 9ebeddef58c4 ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record") Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/all/20211121041608.133740-2-eiichi.tsukata@nutanix.com/ # v1
2021-11-29rxrpc: Fix rxrpc_peer leak in rxrpc_look_up_bundle()Eiichi Tsukata1-5/+9
Need to call rxrpc_put_peer() for bundle candidate before kfree() as it holds a ref to rxrpc_peer. [DH: v2: Changed to abstract out the bundle freeing code into a function] Fixes: 245500d853e9 ("rxrpc: Rewrite the client connection manager") Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/20211121041608.133740-1-eiichi.tsukata@nutanix.com/ # v1
2021-09-24rxrpc: Fix _usecs_to_jiffies() by using usecs_to_jiffies()Jiasheng Jiang1-1/+1
Directly using _usecs_to_jiffies() might be unsafe, so it's better to use usecs_to_jiffies() instead. Because we can see that the result of _usecs_to_jiffies() could be larger than MAX_JIFFY_OFFSET values without the check of the input. Fixes: c410bf01933e ("Fix the excessive initial retransmission timeout") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-18net: RxRPC: make dependent Kconfig symbols be shown indentedRandy Dunlap1-3/+4
Make all dependent RxRPC kconfig entries be dependent on AF_RXRPC so that they are presented (indented) after AF_RXRPC instead of being presented at the same level on indentation. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: David Howells <dhowells@redhat.com> Cc: Marc Dionne <marc.dionne@auristor.com> Cc: linux-afs@lists.infradead.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-30Merge tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds1-1/+1
Pull networking updates from Jakub Kicinski: "Core: - BPF: - add syscall program type and libbpf support for generating instructions and bindings for in-kernel BPF loaders (BPF loaders for BPF), this is a stepping stone for signed BPF programs - infrastructure to migrate TCP child sockets from one listener to another in the same reuseport group/map to improve flexibility of service hand-off/restart - add broadcast support to XDP redirect - allow bypass of the lockless qdisc to improving performance (for pktgen: +23% with one thread, +44% with 2 threads) - add a simpler version of "DO_ONCE()" which does not require jump labels, intended for slow-path usage - virtio/vsock: introduce SOCK_SEQPACKET support - add getsocketopt to retrieve netns cookie - ip: treat lowest address of a IPv4 subnet as ordinary unicast address allowing reclaiming of precious IPv4 addresses - ipv6: use prandom_u32() for ID generation - ip: add support for more flexible field selection for hashing across multi-path routes (w/ offload to mlxsw) - icmp: add support for extended RFC 8335 PROBE (ping) - seg6: add support for SRv6 End.DT46 behavior - mptcp: - DSS checksum support (RFC 8684) to detect middlebox meddling - support Connection-time 'C' flag - time stamping support - sctp: packetization Layer Path MTU Discovery (RFC 8899) - xfrm: speed up state addition with seq set - WiFi: - hidden AP discovery on 6 GHz and other HE 6 GHz improvements - aggregation handling improvements for some drivers - minstrel improvements for no-ack frames - deferred rate control for TXQs to improve reaction times - switch from round robin to virtual time-based airtime scheduler - add trace points: - tcp checksum errors - openvswitch - action execution, upcalls - socket errors via sk_error_report Device APIs: - devlink: add rate API for hierarchical control of max egress rate of virtual devices (VFs, SFs etc.) - don't require RCU read lock to be held around BPF hooks in NAPI context - page_pool: generic buffer recycling New hardware/drivers: - mobile: - iosm: PCIe Driver for Intel M.2 Modem - support for Qualcomm MSM8998 (ipa) - WiFi: Qualcomm QCN9074 and WCN6855 PCI devices - sparx5: Microchip SparX-5 family of Enterprise Ethernet switches - Mellanox BlueField Gigabit Ethernet (control NIC of the DPU) - NXP SJA1110 Automotive Ethernet 10-port switch - Qualcomm QCA8327 switch support (qca8k) - Mikrotik 10/25G NIC (atl1c) Driver changes: - ACPI support for some MDIO, MAC and PHY devices from Marvell and NXP (our first foray into MAC/PHY description via ACPI) - HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx - Mellanox/Nvidia NIC (mlx5) - NIC VF offload of L2 bridging - support IRQ distribution to Sub-functions - Marvell (prestera): - add flower and match all - devlink trap - link aggregation - Netronome (nfp): connection tracking offload - Intel 1GE (igc): add AF_XDP support - Marvell DPU (octeontx2): ingress ratelimit offload - Google vNIC (gve): new ring/descriptor format support - Qualcomm mobile (rmnet & ipa): inline checksum offload support - MediaTek WiFi (mt76) - mt7915 MSI support - mt7915 Tx status reporting - mt7915 thermal sensors support - mt7921 decapsulation offload - mt7921 enable runtime pm and deep sleep - Realtek WiFi (rtw88) - beacon filter support - Tx antenna path diversity support - firmware crash information via devcoredump - Qualcomm WiFi (wcn36xx) - Wake-on-WLAN support with magic packets and GTK rekeying - Micrel PHY (ksz886x/ksz8081): add cable test support" * tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits) tcp: change ICSK_CA_PRIV_SIZE definition tcp_yeah: check struct yeah size at compile time gve: DQO: Fix off by one in gve_rx_dqo() stmmac: intel: set PCI_D3hot in suspend stmmac: intel: Enable PHY WOL option in EHL net: stmmac: option to enable PHY WOL with PMT enabled net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del} net: use netdev_info in ndo_dflt_fdb_{add,del} ptp: Set lookup cookie when creating a PTP PPS source. net: sock: add trace for socket errors net: sock: introduce sk_error_report net: dsa: replay the local bridge FDB entries pointing to the bridge dev too net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev net: dsa: include fdb entries pointing to bridge in the host fdb list net: dsa: include bridge addresses which are local in the host fdb list net: dsa: sync static FDB entries on foreign interfaces to hardware net: dsa: install the host MDB and FDB entries in the master's RX filter net: dsa: reference count the FDB addresses at the cross-chip notifier level net: dsa: introduce a separate cross-chip notifier type for host FDBs net: dsa: reference count the MDB entries at the cross-chip notifier level ...
2021-06-04rxrpc: Fix fall-through warnings for ClangGustavo A. R. Silva1-0/+1
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Reviewed-by: Jeffrey Altman <jaltman@auristor.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-06-02rxrpc: Fix a typoZheng Yongjun1-1/+1
targetted ==> targeted Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-29Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds1-2/+0
Pull networking updates from Jakub Kicinski: "Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes" * tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits) net: selftest: fix build issue if INET is disabled net: netrom: nr_in: Remove redundant assignment to ns net: tun: Remove redundant assignment to ret net: phy: marvell: add downshift support for M88E1240 net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255 net/sched: act_ct: Remove redundant ct get and check icmp: standardize naming of RFC 8335 PROBE constants bpf, selftests: Update array map tests for per-cpu batched ops bpf: Add batched ops support for percpu array bpf: Implement formatted output helpers with bstr_printf seq_file: Add a seq_bprintf function sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues net:nfc:digital: Fix a double free in digital_tg_recv_dep_req net: fix a concurrency bug in l2tp_tunnel_register() net/smc: Remove redundant assignment to rc mpls: Remove redundant assignment to err llc2: Remove redundant assignment to rc net/tls: Remove redundant initialization of record rds: Remove redundant assignment to nr_sig dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0 ...
2021-04-27rxrpc: rxkad: Remove redundant variable offsetJiapeng Chong1-2/+0
Variable offset is being assigned a value from a calculation however the variable is never read, so this redundant variable can be removed. Cleans up the following clang-analyzer warning: net/rxrpc/rxkad.c:579:2: warning: Value stored to 'offset' is never read [clang-analyzer-deadcode.DeadStores]. net/rxrpc/rxkad.c:485:2: warning: Value stored to 'offset' is never read [clang-analyzer-deadcode.DeadStores]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23afs: Don't truncate iter during data fetchDavid Howells1-4/+5
Don't truncate the iterator to correspond to the actual data size when fetching the data from the server - rather, pass the length we want to read to rxrpc. This will allow the clear-after-read code in future to simply clear the remaining iterator capacity rather than having to reinitialise the iterator. Signed-off-by: David Howells <dhowells@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/158861249201.340223.13035445866976590375.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/159465825061.1377938.14403904452300909320.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/160588531418.3465195.10712005940763063144.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118148567.1232039.13380313332292947956.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161044610.2537118.17908520793806837792.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340407907.1303470.6501394859511712746.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539551721.286939.14655713136572200716.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653807790.2770958.14034599989374173734.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789090823.6155.15673999934535049102.stgit@warthog.procyon.org.uk/ # v6
2021-02-12rxrpc: Fix dependency on IPv6 in udp tunnel configVadim Fedorenko1-0/+2
As udp_port_cfg struct changes its members with dependency on IPv6 configuration, the code in rxrpc should also check for IPv6. Fixes: 1a9b86c9fd95 ("rxrpc: use udp tunnel APIs instead of open code in rxrpc_open_socket") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10rxrpc: Fix missing dependency on NET_UDP_TUNNELDavid Howells1-0/+1
The changes to make rxrpc create the udp socket missed a bit to add the Kconfig dependency on the udp tunnel code to do this. Fix this by adding making AF_RXRPC select NET_UDP_TUNNEL. Fixes: 1a9b86c9fd95 ("rxrpc: use udp tunnel APIs instead of open code in rxrpc_open_socket") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> cc: alaa@dev.mellanox.co.il cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-2/+0
2021-02-08rxrpc: use udp tunnel APIs instead of open code in rxrpc_open_socketXin Long1-45/+24
In rxrpc_open_socket(), now it's using sock_create_kern() and kernel_bind() to create a udp tunnel socket, and other kernel APIs to set up it. These code can be replaced with udp tunnel APIs udp_sock_create() and setup_udp_tunnel_sock(), and it'll simplify rxrpc_open_socket(). Note that with this patch, the udp tunnel socket will always bind to a random port if transport is not provided by users, which is suggested by David Howells, thanks! Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-04rxrpc: call udp_tunnel_encap_enable in rxrpc_open_socketXin Long1-5/+2
When doing encap_enable/increasing encap_needed_key, up->encap_enabled is not set in rxrpc_open_socket(), and it will cause encap_needed_key not being decreased in udpv6_destroy_sock(). This patch is to improve it by just calling udp_tunnel_encap_enable() where it increases both UDP and UDPv6 encap_needed_key and sets up->encap_enabled. v4->v5: - add the missing '#include <net/udp_tunnel.h>', as David Howells noticed. Acked-and-tested-by: David Howells <dhowells@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04rxrpc: Fix clearance of Tx/Rx ring when releasing a callDavid Howells1-2/+0
At the end of rxrpc_release_call(), rxrpc_cleanup_ring() is called to clear the Rx/Tx skbuff ring, but this doesn't lock the ring whilst it's accessing it. Unfortunately, rxrpc_resend() might be trying to retransmit a packet concurrently with this - and whilst it does lock the ring, this isn't protection against rxrpc_cleanup_call(). Fix this by removing the call to rxrpc_cleanup_ring() from rxrpc_release_call(). rxrpc_cleanup_ring() will be called again anyway from rxrpc_cleanup_call(). The earlier call is just an optimisation to recycle skbuffs more quickly. Alternative solutions include rxrpc_release_call() could try to cancel the work item or wait for it to complete or rxrpc_cleanup_ring() could lock when accessing the ring (which would require a bh lock). This can produce a report like the following: BUG: KASAN: use-after-free in rxrpc_send_data_packet+0x19b4/0x1e70 net/rxrpc/output.c:372 Read of size 4 at addr ffff888011606e04 by task kworker/0:0/5 ... Workqueue: krxrpcd rxrpc_process_call Call Trace: ... kasan_report.cold+0x79/0xd5 mm/kasan/report.c:413 rxrpc_send_data_packet+0x19b4/0x1e70 net/rxrpc/output.c:372 rxrpc_resend net/rxrpc/call_event.c:266 [inline] rxrpc_process_call+0x1634/0x1f60 net/rxrpc/call_event.c:412 process_one_work+0x98d/0x15f0 kernel/workqueue.c:2275 ... Allocated by task 2318: ... sock_alloc_send_pskb+0x793/0x920 net/core/sock.c:2348 rxrpc_send_data+0xb51/0x2bf0 net/rxrpc/sendmsg.c:358 rxrpc_do_sendmsg+0xc03/0x1350 net/rxrpc/sendmsg.c:744 rxrpc_sendmsg+0x420/0x630 net/rxrpc/af_rxrpc.c:560 ... Freed by task 2318: ... kfree_skb+0x140/0x3f0 net/core/skbuff.c:704 rxrpc_free_skb+0x11d/0x150 net/rxrpc/skbuff.c:78 rxrpc_cleanup_ring net/rxrpc/call_object.c:485 [inline] rxrpc_release_call+0x5dd/0x860 net/rxrpc/call_object.c:552 rxrpc_release_calls_on_socket+0x21c/0x300 net/rxrpc/call_object.c:579 rxrpc_release_sock net/rxrpc/af_rxrpc.c:885 [inline] rxrpc_release+0x263/0x5a0 net/rxrpc/af_rxrpc.c:916 __sock_release+0xcd/0x280 net/socket.c:597 ... The buggy address belongs to the object at ffff888011606dc0 which belongs to the cache skbuff_head_cache of size 232 Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code") Reported-by: syzbot+174de899852504e4a74a@syzkaller.appspotmail.com Reported-by: syzbot+3d1c772efafd3c38d007@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> Link: https://lore.kernel.org/r/161234207610.653119.5287360098400436976.stgit@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29rxrpc: Fix deadlock around release of dst cached on udp tunnelDavid Howells1-3/+3
AF_RXRPC sockets use UDP ports in encap mode. This causes socket and dst from an incoming packet to get stolen and attached to the UDP socket from whence it is leaked when that socket is closed. When a network namespace is removed, the wait for dst records to be cleaned up happens before the cleanup of the rxrpc and UDP socket, meaning that the wait never finishes. Fix this by moving the rxrpc (and, by dependence, the afs) private per-network namespace registrations to the device group rather than subsys group. This allows cached rxrpc local endpoints to be cleared and their UDP sockets closed before we try waiting for the dst records. The symptom is that lines looking like the following: unregister_netdevice: waiting for lo to become free get emitted at regular intervals after running something like the referenced syzbot test. Thanks to Vadim for tracking this down and work out the fix. Reported-by: syzbot+df400f2f24a1677cd7e0@syzkaller.appspotmail.com Reported-by: Vadim Fedorenko <vfedorenko@novek.ru> Fixes: 5271953cad31 ("rxrpc: Use the UDP encap_rcv hook") Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vadim Fedorenko <vfedorenko@novek.ru> Link: https://lore.kernel.org/r/161196443016.3868642.5577440140646403533.stgit@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28rxrpc: Fix memory leak in rxrpc_lookup_localTakeshi Misawa1-0/+1
Commit 9ebeddef58c4 ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record") Then release ref in __rxrpc_put_peer and rxrpc_put_peer_locked. struct rxrpc_peer *rxrpc_alloc_peer(struct rxrpc_local *local, gfp_t gfp) - peer->local = local; + peer->local = rxrpc_get_local(local); rxrpc_discard_prealloc also need ref release in discarding. syzbot report: BUG: memory leak unreferenced object 0xffff8881080ddc00 (size 256): comm "syz-executor339", pid 8462, jiffies 4294942238 (age 12.350s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 0a 00 00 00 00 c0 00 08 81 88 ff ff ................ backtrace: [<000000002b6e495f>] kmalloc include/linux/slab.h:552 [inline] [<000000002b6e495f>] kzalloc include/linux/slab.h:682 [inline] [<000000002b6e495f>] rxrpc_alloc_local net/rxrpc/local_object.c:79 [inline] [<000000002b6e495f>] rxrpc_lookup_local+0x1c1/0x760 net/rxrpc/local_object.c:244 [<000000006b43a77b>] rxrpc_bind+0x174/0x240 net/rxrpc/af_rxrpc.c:149 [<00000000fd447a55>] afs_open_socket+0xdb/0x200 fs/afs/rxrpc.c:64 [<000000007fd8867c>] afs_net_init+0x2b4/0x340 fs/afs/main.c:126 [<0000000063d80ec1>] ops_init+0x4e/0x190 net/core/net_namespace.c:152 [<00000000073c5efa>] setup_net+0xde/0x2d0 net/core/net_namespace.c:342 [<00000000a6744d5b>] copy_net_ns+0x19f/0x3e0 net/core/net_namespace.c:483 [<0000000017d3aec3>] create_new_namespaces+0x199/0x4f0 kernel/nsproxy.c:110 [<00000000186271ef>] unshare_nsproxy_namespaces+0x9b/0x120 kernel/nsproxy.c:226 [<000000002de7bac4>] ksys_unshare+0x2fe/0x5c0 kernel/fork.c:2957 [<00000000349b12ba>] __do_sys_unshare kernel/fork.c:3025 [inline] [<00000000349b12ba>] __se_sys_unshare kernel/fork.c:3023 [inline] [<00000000349b12ba>] __x64_sys_unshare+0x12/0x20 kernel/fork.c:3023 [<000000006d178ef7>] do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 [<00000000637076d4>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 9ebeddef58c4 ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record") Signed-off-by: Takeshi Misawa <jeliantsurux@gmail.com> Reported-and-tested-by: syzbot+305326672fed51b205f7@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/161183091692.3506637.3206605651502458810.stgit@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13rxrpc: Call state should be read with READ_ONCE() under some circumstancesBaptiste Lepers1-1/+1
The call state may be changed at any time by the data-ready routine in response to received packets, so if the call state is to be read and acted upon several times in a function, READ_ONCE() must be used unless the call state lock is held. As it happens, we used READ_ONCE() to read the state a few lines above the unmarked read in rxrpc_input_data(), so use that value rather than re-reading it. Fixes: a158bdd3247b ("rxrpc: Fix call timeouts") Signed-off-by: Baptiste Lepers <baptiste.lepers@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/161046715522.2450566.488819910256264150.stgit@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13rxrpc: Fix handling of an unsupported token type in rxrpc_read()David Howells1-2/+4
Clang static analysis reports the following: net/rxrpc/key.c:657:11: warning: Assigned value is garbage or undefined toksize = toksizes[tok++]; ^ ~~~~~~~~~~~~~~~ rxrpc_read() contains two consecutive loops. The first loop calculates the token sizes and stores the results in toksizes[] and the second one uses the array. When there is an error in identifying the token in the first loop, the token is skipped, no change is made to the toksizes[] array. When the same error happens in the second loop, the token is not skipped. This will cause the toksizes[] array to be out of step and will overrun past the calculated sizes. Fix this by making both loops log a message and return an error in this case. This should only happen if a new token type is incompletely implemented, so it should normally be impossible to trigger this. Fixes: 9a059cd5ca7d ("rxrpc: Downgrade the BUG() for unsupported token type in rxrpc_read()") Reported-by: Tom Rix <trix@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/161046503122.2445787.16714129930607546635.stgit@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-09net: rxrpc: convert comma to semicolonZheng Yongjun1-1/+1
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-11-23rxrpc: Ask the security class how much space to allow in a packetDavid Howells5-40/+82
Ask the security class how much header and trailer space to allow for when allocating a packet, given how much data is remaining. This will allow the rxgk security class to stick both a trailer in as well as a header as appropriate in the future. Signed-off-by: David Howells <dhowells@redhat.com>
2020-11-23rxrpc: rxkad: Don't use pskb_pull() to advance through the response packetDavid Howells1-3/+1
In the rxkad security class, don't use pskb_pull() to advance through the contents of the response packet. There's no point, especially as the next and last access to the skbuff still has to allow for the wire header in the offset (which we didn't advance over). Better to just add the displacement to the next offset. Signed-off-by: David Howells <dhowells@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.