aboutsummaryrefslogtreecommitdiffstats
path: root/net/tipc/udp_media.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-05-17tipc: wait and exit until all work queues are doneXin Long1-0/+2
On some host, a crash could be triggered simply by repeating these commands several times: # modprobe tipc # tipc bearer enable media udp name UDP1 localip 127.0.0.1 # rmmod tipc [] BUG: unable to handle kernel paging request at ffffffffc096bb00 [] Workqueue: events 0xffffffffc096bb00 [] Call Trace: [] ? process_one_work+0x1a7/0x360 [] ? worker_thread+0x30/0x390 [] ? create_worker+0x1a0/0x1a0 [] ? kthread+0x116/0x130 [] ? kthread_flush_work_fn+0x10/0x10 [] ? ret_from_fork+0x35/0x40 When removing the TIPC module, the UDP tunnel sock will be delayed to release in a work queue as sock_release() can't be done in rtnl_lock(). If the work queue is schedule to run after the TIPC module is removed, kernel will crash as the work queue function cleanup_beareri() code no longer exists when trying to invoke it. To fix it, this patch introduce a member wq_count in tipc_net to track the numbers of work queues in schedule, and wait and exit until all work queues are done in tipc_exit_net(). Fixes: d0f91938bede ("tipc: add ip/udp media type") Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-05mld: change lockdep annotation for ip6_sf_socklist and ipv6_mc_socklistTaehee Yoo1-0/+2
struct ip6_sf_socklist and ipv6_mc_socklist are per-socket MLD data. These data are protected by rtnl lock, socket lock, and RCU. So, when these are used, it verifies whether rtnl lock is acquired or not. ip6_mc_msfget() is called by do_ipv6_getsockopt(). But caller doesn't acquire rtnl lock. So, when these data are used in the ip6_mc_msfget() lockdep warns about it. But accessing these is actually safe because socket lock was acquired by do_ipv6_getsockopt(). So, it changes lockdep annotation from rtnl lock to socket lock. (rtnl_dereference -> sock_dereference) Locking graph for mld data is like below: When writing mld data: do_ipv6_setsockopt() rtnl_lock lock_sock (mld functions) idev->mc_lock(if per-interface mld data is modified) When reading mld data: do_ipv6_getsockopt() lock_sock ip6_mc_msfget() Splat looks like: ============================= WARNING: suspicious RCU usage 5.12.0-rc4+ #503 Not tainted ----------------------------- net/ipv6/mcast.c:610 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by mcast-listener-/923: #0: ffff888007958a70 (sk_lock-AF_INET6){+.+.}-{0:0}, at: ipv6_get_msfilter+0xaf/0x190 stack backtrace: CPU: 1 PID: 923 Comm: mcast-listener- Not tainted 5.12.0-rc4+ #503 Call Trace: dump_stack+0xa4/0xe5 ip6_mc_msfget+0x553/0x6c0 ? ipv6_sock_mc_join_ssm+0x10/0x10 ? lockdep_hardirqs_on_prepare+0x3e0/0x3e0 ? mark_held_locks+0xb7/0x120 ? lockdep_hardirqs_on_prepare+0x27c/0x3e0 ? __local_bh_enable_ip+0xa5/0xf0 ? lock_sock_nested+0x82/0xf0 ipv6_get_msfilter+0xc3/0x190 ? compat_ipv6_get_msfilter+0x300/0x300 ? lock_downgrade+0x690/0x690 do_ipv6_getsockopt.isra.6.constprop.13+0x1809/0x29e0 ? do_ipv6_mcast_group_source+0x150/0x150 ? register_lock_class+0x1750/0x1750 ? kvm_sched_clock_read+0x14/0x30 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x170 ? find_held_lock+0x3a/0x1c0 ? lock_downgrade+0x690/0x690 ? ipv6_getsockopt+0xdb/0x1b0 ipv6_getsockopt+0xdb/0x1b0 [ ... ] Fixes: 88e2ca308094 ("mld: convert ifmcaddr6 to RCU") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-01net/tipc: fix various kernel-doc warningsRandy Dunlap1-1/+7
kernel-doc and Sphinx fixes to eliminate lots of warnings in preparation for adding to the networking docbook. ../net/tipc/crypto.c:57: warning: cannot understand function prototype: 'enum ' ../net/tipc/crypto.c:69: warning: cannot understand function prototype: 'enum ' ../net/tipc/crypto.c:130: warning: Function parameter or member 'tfm' not described in 'tipc_tfm' ../net/tipc/crypto.c:130: warning: Function parameter or member 'list' not described in 'tipc_tfm' ../net/tipc/crypto.c:172: warning: Function parameter or member 'stat' not described in 'tipc_crypto_stats' ../net/tipc/crypto.c:232: warning: Function parameter or member 'flags' not described in 'tipc_crypto' ../net/tipc/crypto.c:329: warning: Function parameter or member 'ukey' not described in 'tipc_aead_key_validate' ../net/tipc/crypto.c:329: warning: Function parameter or member 'info' not described in 'tipc_aead_key_validate' ../net/tipc/crypto.c:482: warning: Function parameter or member 'aead' not described in 'tipc_aead_tfm_next' ../net/tipc/trace.c:43: warning: cannot understand function prototype: 'unsigned long sysctl_tipc_sk_filter[5] __read_mostly = ' Documentation/networking/tipc:57: ../net/tipc/msg.c:584: WARNING: Unexpected indentation. Documentation/networking/tipc:63: ../net/tipc/name_table.c:536: WARNING: Unexpected indentation. Documentation/networking/tipc:63: ../net/tipc/name_table.c:537: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/networking/tipc:78: ../net/tipc/socket.c:3809: WARNING: Unexpected indentation. Documentation/networking/tipc:78: ../net/tipc/socket.c:3807: WARNING: Inline strong start-string without end-string. Documentation/networking/tipc:72: ../net/tipc/node.c:904: WARNING: Unexpected indentation. Documentation/networking/tipc:39: ../net/tipc/crypto.c:97: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/networking/tipc:39: ../net/tipc/crypto.c:98: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/networking/tipc:39: ../net/tipc/crypto.c:141: WARNING: Inline strong start-string without end-string. ../net/tipc/discover.c:82: warning: Function parameter or member 'skb' not described in 'tipc_disc_init_msg' ../net/tipc/msg.c:69: warning: Function parameter or member 'gfp' not described in 'tipc_buf_acquire' ../net/tipc/msg.c:382: warning: Function parameter or member 'offset' not described in 'tipc_msg_build' ../net/tipc/msg.c:708: warning: Function parameter or member 'net' not described in 'tipc_msg_lookup_dest' ../net/tipc/subscr.c:65: warning: Function parameter or member 'seq' not described in 'tipc_sub_check_overlap' ../net/tipc/subscr.c:65: warning: Function parameter or member 'found_lower' not described in 'tipc_sub_check_overlap' ../net/tipc/subscr.c:65: warning: Function parameter or member 'found_upper' not described in 'tipc_sub_check_overlap' ../net/tipc/udp_media.c:75: warning: Function parameter or member 'proto' not described in 'udp_media_addr' ../net/tipc/udp_media.c:75: warning: Function parameter or member 'port' not described in 'udp_media_addr' ../net/tipc/udp_media.c:75: warning: Function parameter or member 'ipv4' not described in 'udp_media_addr' ../net/tipc/udp_media.c:75: warning: Function parameter or member 'ipv6' not described in 'udp_media_addr' ../net/tipc/udp_media.c:98: warning: Function parameter or member 'rcast' not described in 'udp_bearer' Also fixed a typo of "duest" to "dest". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-18net: tipc: Supply missing udp_media.h include fileWang Hai1-0/+1
If the header file containing a function's prototype isn't included by the sourcefile containing the associated function, the build system complains of missing prototypes. Fixes the following W=1 kernel build warning(s): net/tipc/udp_media.c:446:5: warning: no previous prototype for ‘tipc_udp_nl_dump_remoteip’ [-Wmissing-prototypes] net/tipc/udp_media.c:532:5: warning: no previous prototype for ‘tipc_udp_nl_add_bearer_data’ [-Wmissing-prototypes] net/tipc/udp_media.c:614:5: warning: no previous prototype for ‘tipc_udp_nl_bearer_add’ [-Wmissing-prototypes] Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-18ipv6: some fixes for ipv6_dev_find()Xin Long1-5/+3
This patch is to do 3 things for ipv6_dev_find(): As David A. noticed, - rt6_lookup() is not really needed. Different from __ip_dev_find(), ipv6_dev_find() doesn't have a compatibility problem, so remove it. As Hideaki suggested, - "valid" (non-tentative) check for the address is also needed. ipv6_chk_addr() calls ipv6_chk_addr_and_flags(), which will traverse the address hash list, but it's heavy to be called inside ipv6_dev_find(). This patch is to reuse the code of ipv6_chk_addr_and_flags() for ipv6_dev_find(). - dev parameter is passed into ipv6_dev_find(), as link-local addresses from user space has sin6_scope_id set and the dev lookup needs it. Fixes: 81f6cb31222d ("ipv6: add ipv6_dev_find()") Suggested-by: YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com> Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-05tipc: set ub->ifindex for local ipv6 addressXin Long1-0/+8
Without ub->ifindex set for ipv6 address in tipc_udp_enable(), ipv6_sock_mc_join() may make the wrong dev join the multicast address in enable_mcast(). This causes that tipc links would never be created. So fix it by getting the right netdev and setting ub->ifindex, as it does for ipv4 address. Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13net: tipc: kerneldoc fixesAndrew Lunn1-1/+1
Simple fixes which require no deep knowledge of the code. Cc: Jon Maloy <jmaloy@redhat.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22tipc: block BH before using dst_cacheEric Dumazet1-1/+5
dst_cache_get() documents it must be used with BH disabled. sysbot reported : BUG: using smp_processor_id() in preemptible [00000000] code: /21697 caller is dst_cache_get+0x3a/0xb0 net/core/dst_cache.c:68 CPU: 0 PID: 21697 Comm: Not tainted 5.7.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 check_preemption_disabled lib/smp_processor_id.c:47 [inline] debug_smp_processor_id.cold+0x88/0x9b lib/smp_processor_id.c:57 dst_cache_get+0x3a/0xb0 net/core/dst_cache.c:68 tipc_udp_xmit.isra.0+0xb9/0xad0 net/tipc/udp_media.c:164 tipc_udp_send_msg+0x3e6/0x490 net/tipc/udp_media.c:244 tipc_bearer_xmit_skb+0x1de/0x3f0 net/tipc/bearer.c:526 tipc_enable_bearer+0xb2f/0xd60 net/tipc/bearer.c:331 __tipc_nl_bearer_enable+0x2bf/0x390 net/tipc/bearer.c:995 tipc_nl_bearer_enable+0x1e/0x30 net/tipc/bearer.c:1003 genl_family_rcv_msg_doit net/netlink/genetlink.c:673 [inline] genl_family_rcv_msg net/netlink/genetlink.c:718 [inline] genl_rcv_msg+0x627/0xdf0 net/netlink/genetlink.c:735 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2469 genl_rcv+0x24/0x40 net/netlink/genetlink.c:746 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6bf/0x7e0 net/socket.c:2362 ___sys_sendmsg+0x100/0x170 net/socket.c:2416 __sys_sendmsg+0xec/0x1b0 net/socket.c:2449 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x45ca29 Fixes: e9c1a793210f ("tipc: add dst_cache support for udp media") Cc: Xin Long <lucien.xin@gmail.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-10tipc: introduce variable window congestion controlJon Maloy1-1/+2
We introduce a simple variable window congestion control for links. The algorithm is inspired by the Reno algorithm, covering both 'slow start', 'congestion avoidance', and 'fast recovery' modes. - We introduce hard lower and upper window limits per link, still different and configurable per bearer type. - We introduce a 'slow start theshold' variable, initially set to the maximum window size. - We let a link start at the minimum congestion window, i.e. in slow start mode, and then let is grow rapidly (+1 per rceived ACK) until it reaches the slow start threshold and enters congestion avoidance mode. - In congestion avoidance mode we increment the congestion window for each window-size number of acked packets, up to a possible maximum equal to the configured maximum window. - For each non-duplicate NACK received, we drop back to fast recovery mode, by setting the both the slow start threshold to and the congestion window to (current_congestion_window / 2). - If the timeout handler finds that the transmit queue has not moved since the previous timeout, it drops the link back to slow start and forces a probe containing the last sent sequence number to the sent to the peer, so that this can discover the stale situation. This change does in reality have effect only on unicast ethernet transport, as we have seen that there is no room whatsoever for increasing the window max size for the UDP bearer. For now, we also choose to keep the limits for the broadcast link unchanged and equal. This algorithm seems to give a 50-100% throughput improvement for messages larger than MTU. Suggested-by: Xin Long <lucien.xin@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04net: ipv6_stub: use ip6_dst_lookup_flow instead of ip6_dst_lookupSabrina Dubroca1-3/+6
ipv6_stub uses the ip6_dst_lookup function to allow other modules to perform IPv6 lookups. However, this function skips the XFRM layer entirely. All users of ipv6_stub->ip6_dst_lookup use ip_route_output_flow (via the ip_route_output_key and ip_route_output helpers) for their IPv4 lookups, which calls xfrm_lookup_route(). This patch fixes this inconsistent behavior by switching the stub to ip6_dst_lookup_flow, which also calls xfrm_lookup_route(). This requires some changes in all the callers, as these two functions take different arguments and have different return types. Fixes: 5f81bd2e5d80 ("ipv6: export a stub for IPv6 symbols used by vxlan") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08tipc: introduce TIPC encryption & authenticationTuong Lien1-0/+1
This commit offers an option to encrypt and authenticate all messaging, including the neighbor discovery messages. The currently most advanced algorithm supported is the AEAD AES-GCM (like IPSec or TLS). All encryption/decryption is done at the bearer layer, just before leaving or after entering TIPC. Supported features: - Encryption & authentication of all TIPC messages (header + data); - Two symmetric-key modes: Cluster and Per-node; - Automatic key switching; - Key-expired revoking (sequence number wrapped); - Lock-free encryption/decryption (RCU); - Asynchronous crypto, Intel AES-NI supported; - Multiple cipher transforms; - Logs & statistics; Two key modes: - Cluster key mode: One single key is used for both TX & RX in all nodes in the cluster. - Per-node key mode: Each nodes in the cluster has one specific TX key. For RX, a node requires its peers' TX key to be able to decrypt the messages from those peers. Key setting from user-space is performed via netlink by a user program (e.g. the iproute2 'tipc' tool). Internal key state machine: Attach Align(RX) +-+ +-+ | V | V +---------+ Attach +---------+ | IDLE |---------------->| PENDING |(user = 0) +---------+ +---------+ A A Switch| A | | | | | | Free(switch/revoked) | | (Free)| +----------------------+ | |Timeout | (TX) | | |(RX) | | | | | | v | +---------+ Switch +---------+ | PASSIVE |<----------------| ACTIVE | +---------+ (RX) +---------+ (user = 1) (user >= 1) The number of TFMs is 10 by default and can be changed via the procfs 'net/tipc/max_tfms'. At this moment, as for simplicity, this file is also used to print the crypto statistics at runtime: echo 0xfff1 > /proc/sys/net/tipc/max_tfms The patch defines a new TIPC version (v7) for the encryption message (- backward compatibility as well). The message is basically encapsulated as follows: +----------------------------------------------------------+ | TIPCv7 encryption | Original TIPCv2 | Authentication | | header | packet (encrypted) | Tag | +----------------------------------------------------------+ The throughput is about ~40% for small messages (compared with non- encryption) and ~9% for large messages. With the support from hardware crypto i.e. the Intel AES-NI CPU instructions, the throughput increases upto ~85% for small messages and ~55% for large messages. By default, the new feature is inactive (i.e. no encryption) until user sets a key for TIPC. There is however also a new option - "TIPC_CRYPTO" in the kernel configuration to enable/disable the new code when needed. MAINTAINERS | add two new files 'crypto.h' & 'crypto.c' in tipc Acked-by: Ying Xue <ying.xue@windreiver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-06net: tipc: have genetlink code to parse the attrs during dumpitJiri Pirko1-5/+1
Benefit from the fact that the generic netlink code can parse the attrs for dumpit op and avoid need to parse it in the op callback. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07tipc: use rcu dereference functions properlyXin Long1-4/+4
For these places are protected by rcu_read_lock, we change from rcu_dereference_rtnl to rcu_dereference, as there is no need to check if rtnl lock is held. For these places are protected by rtnl_lock, we change from rcu_dereference_rtnl to rtnl_dereference/rcu_dereference_protected, as no extra memory barriers are needed under rtnl_lock() which also protects tn->bearer_list[] and dev->tipc_ptr/b->media_ptr updating. rcu_dereference_rtnl will be only used in the places where it could be under rcu_read_lock or rtnl_lock. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02tipc: remove ub->ubsock checksXin Long1-9/+8
Both tipc_udp_enable and tipc_udp_disable are called under rtnl_lock, ub->ubsock could never be NULL in tipc_udp_disable and cleanup_bearer, so remove the check. Also remove the one in tipc_udp_enable by adding "free" label. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27tipc: add dst_cache support for udp mediaXin Long1-25/+47
As other udp/ip tunnels do, tipc udp media should also have a lockless dst_cache supported on its tx path. Here we add dst_cache into udp_replicast to support dst cache for both rmcast and rcast, and rmcast uses ub->rcast and each rcast uses its own node in ub->rcast.list. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18tipc: pass tunnel dev as NULL to udp_tunnel(6)_xmit_skbXin Long1-5/+3
udp_tunnel(6)_xmit_skb() called by tipc_udp_xmit() expects a tunnel device to count packets on dev->tstats, a perpcu variable. However, TIPC is using udp tunnel with no tunnel device, and pass the lower dev, like veth device that only initializes dev->lstats(a perpcu variable) when creating it. Later iptunnel_xmit_stats() called by ip(6)tunnel_xmit() thinks the dev as a tunnel device, and uses dev->tstats instead of dev->lstats. tstats' each pointer points to a bigger struct than lstats, so when tstats->tx_bytes is increased, other percpu variable's members could be overwritten. syzbot has reported quite a few crashes due to fib_nh_common percpu member 'nhc_pcpu_rth_output' overwritten, call traces are like: BUG: KASAN: slab-out-of-bounds in rt_cache_valid+0x158/0x190 net/ipv4/route.c:1556 rt_cache_valid+0x158/0x190 net/ipv4/route.c:1556 __mkroute_output net/ipv4/route.c:2332 [inline] ip_route_output_key_hash_rcu+0x819/0x2d50 net/ipv4/route.c:2564 ip_route_output_key_hash+0x1ef/0x360 net/ipv4/route.c:2393 __ip_route_output_key include/net/route.h:125 [inline] ip_route_output_flow+0x28/0xc0 net/ipv4/route.c:2651 ip_route_output_key include/net/route.h:135 [inline] ... or: kasan: GPF could be caused by NULL-ptr deref or user memory access RIP: 0010:dst_dev_put+0x24/0x290 net/core/dst.c:168 <IRQ> rt_fibinfo_free_cpus net/ipv4/fib_semantics.c:200 [inline] free_fib_info_rcu+0x2e1/0x490 net/ipv4/fib_semantics.c:217 __rcu_reclaim kernel/rcu/rcu.h:240 [inline] rcu_do_batch kernel/rcu/tree.c:2437 [inline] invoke_rcu_callbacks kernel/rcu/tree.c:2716 [inline] rcu_process_callbacks+0x100a/0x1ac0 kernel/rcu/tree.c:2697 ... The issue exists since tunnel stats update is moved to iptunnel_xmit by Commit 039f50629b7f ("ip_tunnel: Move stats update to iptunnel_xmit()"), and here to fix it by passing a NULL tunnel dev to udp_tunnel(6)_xmit_skb so that the packets counting won't happen on dev->tstats. Reported-by: syzbot+9d4c12bfd45a58738d0a@syzkaller.appspotmail.com Reported-by: syzbot+a9e23ea2aa21044c2798@syzkaller.appspotmail.com Reported-by: syzbot+c4c4b2bb358bb936ad7e@syzkaller.appspotmail.com Reported-by: syzbot+0290d2290a607e035ba1@syzkaller.appspotmail.com Reported-by: syzbot+a43d8d4e7e8a7a9e149e@syzkaller.appspotmail.com Reported-by: syzbot+a47c5f4c6c00fc1ed16e@syzkaller.appspotmail.com Fixes: 039f50629b7f ("ip_tunnel: Move stats update to iptunnel_xmit()") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27netlink: make validation more configurable for future strictnessJohannes Berg1-8/+5
We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27netlink: make nla_nest_start() add NLA_F_NESTED flagMichal Kubecek1-1/+1
Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26tipc: remove rcu_read_unlock() left in tipc_udp_recv()Eric Dumazet1-1/+0
I forgot to remove one rcu_read_unlock() before a return statement. Joy of mixing goto and return styles in a function :) Fixes: 4109a2c3b91e ("tipc: tipc_udp_recv() cleanup vs rcu verbs") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24tipc: tipc_udp_recv() cleanup vs rcu verbsEric Dumazet1-6/+3
First thing tipc_udp_recv() does is to use rcu_dereference_sk_user_data(), and this is really hinting we already own rcu_read_lock() from the caller (UDP stack). No need to add another rcu_read_lock()/rcu_read_unlock() pair. Also use rcu_dereference() instead of rcu_dereference_rtnl() in the data path. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29ipv6: Move ipv6 stubs to a separate header fileDavid Ahern1-1/+1
The number of stubs is growing and has nothing to do with addrconf. Move the definition of the stubs to a separate header file and update users. In the move, drop the vxlan specific comment before ipv6_stub. Code move only; no functional change intended. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-14tipc: compare remote and local protocols in tipc_udp_enable()Cong Wang1-0/+5
When TIPC_NLA_UDP_REMOTE is an IPv6 mcast address but TIPC_NLA_UDP_LOCAL is an IPv4 address, a NULL-ptr deref is triggered as the UDP tunnel sock is initialized to IPv4 or IPv6 sock merely based on the protocol in local address. We should just error out when the remote address and local address have different protocols. Reported-by: syzbot+eb4da3a20fad2e52555d@syzkaller.appspotmail.com Cc: Ying Xue <ying.xue@windriver.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-14tipc: fix a double kfree_skb()Cong Wang1-3/+1
tipc_udp_xmit() drops the packet on error, there is no need to drop it again. Fixes: ef20cd4dd163 ("tipc: introduce UDP replicast") Reported-and-tested-by: syzbot+eae585ba2cc2752d3704@syzkaller.appspotmail.com Cc: Ying Xue <ying.xue@windriver.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15tipc: support binding to specific ip address when activating UDP bearerHoang Le1-3/+15
INADDR_ANY is hard-coded when activating UDP bearer. So, we could not bind to a specific IP address even with replicast mode using - given remote ip address instead of using multicast ip address. In this commit, we fixed it by checking and switch to use appropriate local ip address. before: $netstat -plu Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address udp 0 0 **0.0.0.0:6118** 0.0.0.0:* after: $netstat -plu Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address udp 0 0 **10.0.0.2:6118** 0.0.0.0:* Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-20tipc: set default MTU for UDP mediaGhantaKrishnamurthy MohanKrishna1-2/+2
Currently, all bearers are configured with MTU value same as the underlying L2 device. However, in case of bearers with media type UDP, higher throughput is possible with a fixed and higher emulated MTU value than adapting to the underlying L2 MTU. In this commit, we introduce a parameter mtu in struct tipc_media and a default value is set for UDP. A default value of 14k was determined by experimentation and found to have a higher throughput than 16k. MTU for UDP bearers are assigned the above set value of media MTU. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: GhantaKrishnamurthy MohanKrishna <mohan.krishna.ghanta.krishnamurthy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27tipc: fix error handling in tipc_udp_enable()Wei Yongjun1-1/+2
Release alloced resource before return from the error handling case in tipc_udp_enable(), otherwise will cause memory leak. Fixes: 52dfae5c85a4 ("tipc: obtain node identity from interface by default") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23tipc: obtain node identity from interface by defaultJon Maloy1-0/+13
Selecting and explicitly configuring a TIPC node identity may be unwanted in some cases. In this commit we introduce a default setting if the identity has not been set at the moment the first bearer is enabled. We do this by using a raw copy of a unique identifier from the used interface: MAC address in the case of an L2 bearer, IPv4/IPv6 address in the case of a UDP bearer. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01tipc: call tipc_rcv() only if bearer is up in tipc_udp_recv()Tommi Rantala1-4/+0
Remove the second tipc_rcv() call in tipc_udp_recv(). We have just checked that the bearer is not up, and calling tipc_rcv() with a bearer that is not up leads to a TIPC div-by-zero crash in tipc_node_calculate_timer(). The crash is rare in practice, but can happen like this: We're enabling a bearer, but it's not yet up and fully initialized. At the same time we receive a discovery packet, and in tipc_udp_recv() we end up calling tipc_rcv() with the not-yet-initialized bearer, causing later the div-by-zero crash in tipc_node_calculate_timer(). Jon Maloy explains the impact of removing the second tipc_rcv() call: "link setup in the worst case will be delayed until the next arriving discovery messages, 1 sec later, and this is an acceptable delay." As the tipc_rcv() call is removed, just leave the function via the rcu_out label, so that we will kfree_skb(). [ 12.590450] Own node address <1.1.1>, network identity 1 [ 12.668088] divide error: 0000 [#1] SMP [ 12.676952] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.14.2-dirty #1 [ 12.679225] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 [ 12.682095] task: ffff8c2a761edb80 task.stack: ffffa41cc0cac000 [ 12.684087] RIP: 0010:tipc_node_calculate_timer.isra.12+0x45/0x60 [tipc] [ 12.686486] RSP: 0018:ffff8c2a7fc838a0 EFLAGS: 00010246 [ 12.688451] RAX: 0000000000000000 RBX: ffff8c2a5b382600 RCX: 0000000000000000 [ 12.691197] RDX: 0000000000000000 RSI: ffff8c2a5b382600 RDI: ffff8c2a5b382600 [ 12.693945] RBP: ffff8c2a7fc838b0 R08: 0000000000000001 R09: 0000000000000001 [ 12.696632] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8c2a5d8949d8 [ 12.699491] R13: ffffffff95ede400 R14: 0000000000000000 R15: ffff8c2a5d894800 [ 12.702338] FS: 0000000000000000(0000) GS:ffff8c2a7fc80000(0000) knlGS:0000000000000000 [ 12.705099] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 12.706776] CR2: 0000000001bb9440 CR3: 00000000bd009001 CR4: 00000000003606e0 [ 12.708847] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 12.711016] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 12.712627] Call Trace: [ 12.713390] <IRQ> [ 12.714011] tipc_node_check_dest+0x2e8/0x350 [tipc] [ 12.715286] tipc_disc_rcv+0x14d/0x1d0 [tipc] [ 12.716370] tipc_rcv+0x8b0/0xd40 [tipc] [ 12.717396] ? minmax_running_min+0x2f/0x60 [ 12.718248] ? dst_alloc+0x4c/0xa0 [ 12.718964] ? tcp_ack+0xaf1/0x10b0 [ 12.719658] ? tipc_udp_is_known_peer+0xa0/0xa0 [tipc] [ 12.720634] tipc_udp_recv+0x71/0x1d0 [tipc] [ 12.721459] ? dst_alloc+0x4c/0xa0 [ 12.722130] udp_queue_rcv_skb+0x264/0x490 [ 12.722924] __udp4_lib_rcv+0x21e/0x990 [ 12.723670] ? ip_route_input_rcu+0x2dd/0xbf0 [ 12.724442] ? tcp_v4_rcv+0x958/0xa40 [ 12.725039] udp_rcv+0x1a/0x20 [ 12.725587] ip_local_deliver_finish+0x97/0x1d0 [ 12.726323] ip_local_deliver+0xaf/0xc0 [ 12.726959] ? ip_route_input_noref+0x19/0x20 [ 12.727689] ip_rcv_finish+0xdd/0x3b0 [ 12.728307] ip_rcv+0x2ac/0x360 [ 12.728839] __netif_receive_skb_core+0x6fb/0xa90 [ 12.729580] ? udp4_gro_receive+0x1a7/0x2c0 [ 12.730274] __netif_receive_skb+0x1d/0x60 [ 12.730953] ? __netif_receive_skb+0x1d/0x60 [ 12.731637] netif_receive_skb_internal+0x37/0xd0 [ 12.732371] napi_gro_receive+0xc7/0xf0 [ 12.732920] receive_buf+0x3c3/0xd40 [ 12.733441] virtnet_poll+0xb1/0x250 [ 12.733944] net_rx_action+0x23e/0x370 [ 12.734476] __do_softirq+0xc5/0x2f8 [ 12.734922] irq_exit+0xfa/0x100 [ 12.735315] do_IRQ+0x4f/0xd0 [ 12.735680] common_interrupt+0xa2/0xa2 [ 12.736126] </IRQ> [ 12.736416] RIP: 0010:native_safe_halt+0x6/0x10 [ 12.736925] RSP: 0018:ffffa41cc0cafe90 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff4d [ 12.737756] RAX: 0000000000000000 RBX: ffff8c2a761edb80 RCX: 0000000000000000 [ 12.738504] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 12.739258] RBP: ffffa41cc0cafe90 R08: 0000014b5b9795e5 R09: ffffa41cc12c7e88 [ 12.740118] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002 [ 12.740964] R13: ffff8c2a761edb80 R14: 0000000000000000 R15: 0000000000000000 [ 12.741831] default_idle+0x2a/0x100 [ 12.742323] arch_cpu_idle+0xf/0x20 [ 12.742796] default_idle_call+0x28/0x40 [ 12.743312] do_idle+0x179/0x1f0 [ 12.743761] cpu_startup_entry+0x1d/0x20 [ 12.744291] start_secondary+0x112/0x120 [ 12.744816] secondary_startup_64+0xa5/0xa5 [ 12.745367] Code: b9 f4 01 00 00 48 89 c2 48 c1 ea 02 48 3d d3 07 00 00 48 0f 47 d1 49 8b 0c 24 48 39 d1 76 07 49 89 14 24 48 89 d1 31 d2 48 89 df <48> f7 f1 89 c6 e8 81 6e ff ff 5b 41 5c 5d c3 66 90 66 2e 0f 1f [ 12.747527] RIP: tipc_node_calculate_timer.isra.12+0x45/0x60 [tipc] RSP: ffff8c2a7fc838a0 [ 12.748555] ---[ end trace 1399ab83390650fd ]--- [ 12.749296] Kernel panic - not syncing: Fatal exception in interrupt [ 12.750123] Kernel Offset: 0x13200000 from 0xffffffff82000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 12.751215] Rebooting in 60 seconds.. Fixes: c9b64d492b1f ("tipc: add replicast peer discovery") Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13netlink: pass extended ACK struct to parsing functionsJohannes Berg1-3/+4
Pass the new extended ACK reporting struct to all of the generic netlink parsing functions. For now, pass NULL in almost all callers (except for some in the core.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-20tipc: add function for checking broadcast support in bearerJon Paul Maloy1-4/+4
As a preparation for the 'replicast' functionality we are going to introduce in the next commits, we need the broadcast base structure to store whether bearer broadcast is available at all from the currently used bearer or bearers. We do this by adding a new function tipc_bearer_bcast_support() to the bearer layer, and letting the bearer selection function in bcast.c use this to give a new boolean field, 'bcast_support' the appropriate value. Reviewed-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02tipc: check minimum bearer MTUMichal Kubeček1-0/+5
Qian Zhang (张谦) reported a potential socket buffer overflow in tipc_msg_build() which is also known as CVE-2016-8632: due to insufficient checks, a buffer overflow can occur if MTU is too short for even tipc headers. As anyone can set device MTU in a user/net namespace, this issue can be abused by a regular user. As agreed in the discussion on Ben Hutchings' original patch, we should check the MTU at the moment a bearer is attached rather than for each processed packet. We also need to repeat the check when bearer MTU is adjusted to new device MTU. UDP case also needs a check to avoid overflow when calculating bearer MTU. Fixes: b97bf3fd8f6a ("[TIPC] Initial merge") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reported-by: Qian Zhang (张谦) <zhangqian-c@360.cn> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-13tipc: info leak in __tipc_nl_add_udp_addr()Dan Carpenter1-0/+2
We should clear out the padding and unused struct members so that we don't expose stack information to userspace. Fixes: fdb3accc2c15 ('tipc: add the ability to get UDP options via netlink') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-13tipc: fix possible memory leak in tipc_udp_enable()Wei Yongjun1-1/+2
'ub' is malloced in tipc_udp_enable() and should be freed before leaving from the error handling cases, otherwise it will cause memory leak. Fixes: ba5aa84a2d22 ("tipc: split UDP nl address parsing") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+2
All three conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26tipc: add UDP remoteip dump to netlink APIRichard Alpe1-0/+90
When using replicast a UDP bearer can have an arbitrary amount of remote ip addresses associated with it. This means we cannot simply add all remote ip addresses to an existing bearer data message as it might fill the message, leaving us with a truncated message that we can't safely resume. To handle this we introduce the new netlink command TIPC_NL_UDP_GET_REMOTEIP. This command is intended to be called when the bearer data message has the TIPC_NLA_UDP_MULTI_REMOTEIP flag set, indicating there are more than one remote ip (replicast). Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26tipc: add the ability to get UDP options via netlinkRichard Alpe1-0/+61
Add UDP bearer options to netlink bearer get message. This is used by the tipc user space tool to display UDP options. The UDP bearer information is passed using either a sockaddr_in or sockaddr_in6 structs. This means the user space receiver should intermediately store the retrieved data in a large enough struct (sockaddr_strage) before casting to the proper IP version type. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26tipc: add replicast peer discoveryRichard Alpe1-3/+80
Automatically learn UDP remote IP addresses of communicating peers by looking at the source IP address of incoming TIPC link configuration messages (neighbor discovery). This makes configuration slightly easier and removes the problematic scenario where a node receives directly addressed neighbor discovery messages sent using replicast which the node cannot "reply" to using mutlicast, leaving the link FSM in a limbo state. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26tipc: introduce UDP replicastRichard Alpe1-12/+106
This patch introduces UDP replicast. A concept where we emulate multicast by sending multiple unicast messages to configured peers. The purpose of replicast is mainly to be able to use TIPC in cloud environments where IP multicast is disabled. Using replicas to unicast multicast messages is costly as we have to copy each skb and send the copies individually. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26tipc: refactor multicast ip checkRichard Alpe1-15/+19
Add a function to check if a tipc UDP media address is a multicast address or not. This is a purely cosmetic change. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26tipc: split UDP send functionRichard Alpe1-18/+32
Split the UDP send function into two. One callback that prepares the skb and one transmit function that sends the skb. This will come in handy in later patches, when we introduce UDP replicast. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26tipc: split UDP nl address parsingRichard Alpe1-57/+55
Split the UDP netlink parse function so that it only parses one netlink attribute at the time. This makes the parse function more generic and allow future UDP API functions to use it for parsing. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-25tipc: fix the error handling in tipc_udp_enable()Wei Yongjun1-1/+4
Fix to return a negative error code in enable_mcast() error handling case, and release udp socket when necessary. Fixes: d0f91938bede ("tipc: add ip/udp media type") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18tipc: make bearer packet filtering genericJon Paul Maloy1-1/+1
In commit 5b7066c3dd24 ("tipc: stricter filtering of packets in bearer layer") we introduced a method of filtering out messages while a bearer is being reset, to avoid that links may be re-created and come back in working state while we are still in the process of shutting them down. This solution works well, but is limited to only work with L2 media, which is insufficient with the increasing use of UDP as carrier media. We now replace this solution with a more generic one, by introducing a new flag "up" in the generic struct tipc_bearer. This field will be set and reset at the same locations as with the previous solution, while the packet filtering is moved to the generic code for the sending side. On the receiving side, the filtering is still done in media specific code, but now including the UDP bearer. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29tipc: rename udp_port in struct udp_media_addrRichard Alpe1-12/+12
Context implies that port in struct "udp_media_addr" is referring to a UDP port. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14tipc: make sure IPv6 header fits in skb headroomRichard Alpe1-1/+1
Expand headroom further in order to be able to fit the larger IPv6 header. Prior to this patch this caused a skb under panic for certain tipc packets when using IPv6 UDP bearer(s). Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11ip_tunnel: add support for setting flow label via collect metadataDaniel Borkmann1-1/+1
This patch extends udp_tunnel6_xmit_skb() to pass in the IPv6 flow label from call sites. Currently, there's no such option and it's always set to zero when writing ip6_flow_hdr(). Add a label member to ip_tunnel_key, so that flow-based tunnels via collect metadata frontends can make use of it. vxlan and geneve will be converted to add flow label support separately. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07tipc: move netlink policies to netlink.cRichard Alpe1-8/+1
Make the c files less cluttered and enable netlink attributes to be shared between files. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06tipc: make sure required IPv6 addresses are scopedRichard Alpe1-0/+5
Make sure the user has provided a scope for multicast and link local addresses used locally by a UDP bearer. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06tipc: safely copy UDP netlink data from userRichard Alpe1-11/+13
The netlink policy for TIPC_NLA_UDP_LOCAL and TIPC_NLA_UDP_REMOTE is of type binary with a defined length. This causes the policy framework to threat the defined length as maximum length. There is however no protection against a user sending a smaller amount of data. Prior to this patch this wasn't handled which could result in a partially incomplete sockaddr_storage struct containing uninitialized data. In this patch we use nla_memcpy() when copying the user data. This ensures a potential gap at the end is cleared out properly. This was found by Julia with Coccinelle tool. Reported-by: Daniel Borkmann <daniel@iogearbox.net> Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06tipc: add net device to skb before UDP xmitRichard Alpe1-0/+2
Prior to this patch enabling a IPv4 UDP bearer caused a null pointer dereference in iptunnel_xmit_stats(), when it tried to dereference the net device from the skb. To resolve this we now point the skb device to the net device resolved from the routing table. Fixes: 039f50629b7f (ip_tunnel: Move stats update to iptunnel_xmit()) Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.