path: root/net/xfrm/xfrm_input.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-12-09xfrm: introduce xfrm_trans_queue_netSabrina Dubroca1-4/+17
This will be used by TCP encapsulation to write packets to the encap socket without holding the user socket's lock. Without this reinjection, we're already holding the lock of the user socket, and then try to lock the encap socket as well when we enqueue the encrypted packet. While at it, add a BUILD_BUG_ON like we usually do for skb->cb, since it's missing for struct xfrm_trans_cb. Co-developed-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-11-12xfrm: release device reference for invalid stateXiaodong Xu1-0/+3
An ESP packet could be decrypted in async mode if the input handler for this packet returns -EINPROGRESS in xfrm_input(). At this moment the device reference in skb is held. Later xfrm_input() will be invoked again to resume the processing. If the transform state is still valid it would continue to release the device reference and there won't be a problem; however if the transform state is not valid when async resumption happens, the packet will be dropped while the device reference is still being held. When the device is deleted for some reason and the reference to this device is not properly released, the kernel will keep logging like: unregister_netdevice: waiting for ppp2 to become free. Usage count = 1 The issue is observed when running IPsec traffic over a PPPoE device based on a bridge interface. By terminating the PPPoE connection on the server end for multiple times, the PPPoE device on the client side will eventually get stuck on the above warning message. This patch will check the async mode first and continue to release device reference in async resumption, before it is dropped due to invalid state. v2: Do not assign address family from outer_mode in the transform if the state is invalid v3: Release device reference in the error path instead of jumping to resume Fixes: 4ce3dbe397d7b ("xfrm: Fix xfrm_input() to verify state is valid when (encap_type < 0)") Signed-off-by: Xiaodong Xu <stid.smth@gmail.com> Reported-by: Bo Chen <chenborfc@163.com> Tested-by: Bo Chen <chenborfc@163.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-10-01netfilter: drop bridge nf reset from nf_resetFlorian Westphal1-1/+1
commit 174e23810cd31 ("sk_buff: drop all skb extensions on free and skb scrubbing") made napi recycle always drop skb extensions. The additional skb_ext_del() that is performed via nf_reset on napi skb recycle is not needed anymore. Most nf_reset() calls in the stack are there so queued skb won't block 'rmmod nf_conntrack' indefinitely. This removes the skb_ext_del from nf_reset, and renames it to a more fitting nf_reset_ct(). In a few selected places, add a call to skb_ext_reset to make sure that no active extensions remain. I am submitting this for "net", because we're still early in the release cycle. The patch applies to net-next too, but I think the rename causes needless divergence between those trees. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-06-12xfrm: fix bogus WARN_ON with ipv6Florian Westphal1-0/+1
net/xfrm/xfrm_input.c:378:17: warning: this statement may fall through [-Wimplicit-fallthrough=] skb->protocol = htons(ETH_P_IPV6); ... the fallthrough then causes a bogus WARN_ON(). Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 4c203b0454b ("xfrm: remove eth_proto value from xfrm_state_afinfo") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-06-06xfrm: remove eth_proto value from xfrm_state_afinfoFlorian Westphal1-12/+12
xfrm_prepare_input needs to lookup the state afinfo backend again to fetch the address family ethernet protocol value. There are only two address families, so a switch statement is simpler. While at it, use u8 for family and proto and remove the owner member -- its not used anywhere. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: store xfrm_mode directly, not its addressFlorian Westphal1-7/+7
This structure is now only 4 bytes, so its more efficient to cache a copy rather than its address. No significant size difference in allmodconfig vmlinux. With non-modular kernel that has all XFRM options enabled, this series reduces vmlinux image size by ~11kb. All xfrm_mode indirections are gone and all modes are built-in. before (ipsec-next master): text data bss dec filename 21071494 7233140 11104324 39408958 vmlinux.master after this series: 21066448 7226772 11104324 39397544 vmlinux.patched With allmodconfig kernel, the size increase is only 362 bytes, even all the xfrm config options removed in this series are modular. before: text data bss dec filename 15731286 6936912 4046908 26715106 vmlinux.master after this series: 15731492 6937068 4046908 26715468 vmlinux Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: make xfrm modes builtinFlorian Westphal1-8/+5
after previous changes, xfrm_mode contains no function pointers anymore and all modules defining such struct contain no code except an init/exit functions to register the xfrm_mode struct with the xfrm core. Just place the xfrm modes core and remove the modules, the run-time xfrm_mode register/unregister functionality is removed. Before: text data bss dec filename 7523 200 2364 10087 net/xfrm/xfrm_input.o 40003 628 440 41071 net/xfrm/xfrm_state.o 15730338 6937080 4046908 26714326 vmlinux 7389 200 2364 9953 net/xfrm/xfrm_input.o 40574 656 440 41670 net/xfrm/xfrm_state.o 15730084 6937068 4046908 26714060 vmlinux The xfrm*_mode_{transport,tunnel,beet} modules are gone. v2: replace CONFIG_INET6_XFRM_MODE_* IS_ENABLED guards with CONFIG_IPV6 ones rather than removing them. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: remove afinfo pointer from xfrm_modeFlorian Westphal1-6/+28
Adds an EXPORT_SYMBOL for afinfo_get_rcu, as it will now be called from ipv6 in case of CONFIG_IPV6=m. This change has virtually no effect on vmlinux size, but it reduces afinfo size and allows followup patch to make xfrm modes const. v2: mark if (afinfo) tests as likely (Sabrina) re-fetch afinfo according to inner_mode in xfrm_prepare_input(). Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: remove input2 indirection from xfrm_modeFlorian Westphal1-1/+184
No external dependencies on any module, place this in the core. Increase is about 1800 byte for xfrm_input.o. The beet helpers get added to internal header, as they can be reused from xfrm_output.c in the next patch (kernel contains several copies of them in the xfrm{4,6}_mode_beet.c files). Before: text data bss dec filename 5578 176 2364 8118 net/xfrm/xfrm_input.o 1180 64 0 1244 net/ipv4/xfrm4_mode_beet.o 171 40 0 211 net/ipv4/xfrm4_mode_transport.o 1163 40 0 1203 net/ipv4/xfrm4_mode_tunnel.o 1083 52 0 1135 net/ipv6/xfrm6_mode_beet.o 172 40 0 212 net/ipv6/xfrm6_mode_ro.o 172 40 0 212 net/ipv6/xfrm6_mode_transport.o 1056 40 0 1096 net/ipv6/xfrm6_mode_tunnel.o After: text data bss dec filename 7373 200 2364 9937 net/xfrm/xfrm_input.o 587 44 0 631 net/ipv4/xfrm4_mode_beet.o 171 32 0 203 net/ipv4/xfrm4_mode_transport.o 649 32 0 681 net/ipv4/xfrm4_mode_tunnel.o 625 44 0 669 net/ipv6/xfrm6_mode_beet.o 172 32 0 204 net/ipv6/xfrm6_mode_ro.o 172 32 0 204 net/ipv6/xfrm6_mode_transport.o 599 32 0 631 net/ipv6/xfrm6_mode_tunnel.o v2: pass inner_mode to xfrm_inner_mode_encap_remove to fix AF_UNSPEC selector breakage (bisected by Benedict Wong) Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: remove input indirection from xfrm_modeFlorian Westphal1-3/+72
No need for any indirection or abstraction here, both functions are pretty much the same and quite small, they also have no external dependencies. xfrm_prepare_input can then be made static. With allmodconfig build, size increase of vmlinux is 25 byte: Before: text data bss dec filename 15730207 6936924 4046908 26714039 vmlinux After: 15730208 6936948 4046908 26714064 vmlinux v2: Fix INET_XFRM_MODE_TRANSPORT name in is-enabled test (Sabrina Dubroca) change copied comment to refer to transport and network header, not skb->{h,nh}, which don't exist anymore. (Sabrina) make xfrm_prepare_input static (Eyal Birger) Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: prefer family stored in xfrm_mode structFlorian Westphal1-2/+2
Now that we have the family available directly in the xfrm_mode struct, we can use that and avoid one extra dereference. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-12-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+6
Lots of conflicts, by happily all cases of overlapping changes, parallel adds, things of that nature. Thanks to Stephen Rothwell, Saeed Mahameed, and others for their guidance in these resolutions. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net: switch secpath to use skb extension infrastructureFlorian Westphal1-48/+8
Remove skb->sp and allocate secpath storage via extension infrastructure. This also reduces sk_buff by 8 bytes on x86_64. Total size of allyesconfig kernel is reduced slightly, as there is less inlined code (one conditional atomic op instead of two on skb_clone). No differences in throughput in following ipsec performance tests: - transport mode with aes on 10GB link - tunnel mode between two network namespaces with aes and null cipher Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net: use skb_sec_path helper in more placesFlorian Westphal1-6/+10
skb_sec_path gains 'const' qualifier to avoid xt_policy.c: 'skb_sec_path' discards 'const' qualifier from pointer target type same reasoning as previous conversions: Won't need to touch these spots anymore when skb->sp is removed. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19xfrm: change secpath_set to return secpath struct, not error valueFlorian Westphal1-7/+9
It can only return 0 (success) or -ENOMEM. Change return value to a pointer to secpath struct. This avoids direct access to skb->sp: err = secpath_set(skb); if (!err) .. skb->sp-> ... Becomes: sp = secpath_set(skb) if (!sp) .. sp-> .. This reduces noise in followup patch which is going to remove skb->sp. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22xfrm: Fix NULL pointer dereference in xfrm_input when skb_dst_force clears the dst_entry.Steffen Klassert1-1/+6
Since commit 222d7dbd258d ("net: prevent dst uses after free") skb_dst_force() might clear the dst_entry attached to the skb. The xfrm code doesn't expect this to happen, so we crash with a NULL pointer dereference in this case. Fix it by checking skb_dst(skb) for NULL after skb_dst_force() and drop the packet in case the dst_entry was cleared. We also move the skb_dst_force() to a codepath that is not used when the transformation was offloaded, because in this case we don't have a dst_entry attached to the skb. The output and forwarding path was already fixed by commit 9e1437937807 ("xfrm: Fix NULL pointer dereference when skb_dst_force clears the dst_entry.") Fixes: 222d7dbd258d ("net: prevent dst uses after free") Reported-by: Jean-Philippe Menil <jpmenil@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-10-08xfrm: use correct size to initialise sp->ovecLi RongQing1-1/+1
This place should want to initialize array, not a element, so it should be sizeof(array) instead of sizeof(element) but now this array only has one element, so no error in this condition that XFRM_MAX_OFFLOAD_DEPTH is 1 Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-10-01Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller1-0/+1
Steffen Klassert says: ==================== pull request (net): ipsec 2018-10-01 1) Validate address prefix lengths in the xfrm selector, otherwise we may hit undefined behaviour in the address matching functions if the prefix is too big for the given address family. 2) Fix skb leak on local message size errors. From Thadeu Lima de Souza Cascardo. 3) We currently reset the transport header back to the network header after a transport mode transformation is applied. This leads to an incorrect transport header when multiple transport mode transformations are applied. Reset the transport header only after all transformations are already applied to fix this. From Sowmini Varadhan. 4) We only support one offloaded xfrm, so reset crypto_done after the first transformation in xfrm_input(). Otherwise we may call the wrong input method for subsequent transformations. From Sowmini Varadhan. 5) Fix NULL pointer dereference when skb_dst_force clears the dst_entry. skb_dst_force does not really force a dst refcount anymore, it might clear it instead. xfrm code did not expect this, add a check to not dereference skb_dst() if it was cleared by skb_dst_force. 6) Validate xfrm template mode, otherwise we can get a stack-out-of-bounds read in xfrm_state_find. From Sean Tranchetti. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-04xfrm: reset crypto_done when iterating over multiple input xfrmsSowmini Varadhan1-0/+1
We only support one offloaded xfrm (we do not have devices that can handle more than one offload), so reset crypto_done in xfrm_input() when iterating over multiple transforms in xfrm_input, so that we can invoke the appropriate x->type->input for the non-offloaded transforms Fixes: d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API") Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-06-23xfrm: Add virtual xfrm interfacesSteffen Klassert1-0/+3
This patch adds support for virtual xfrm interfaces. Packets that are routed through such an interface are guaranteed to be IPsec transformed or dropped. It is a generic virtual interface that ensures IPsec transformation, no need to know what happens behind the interface. This means that we can tunnel IPv4 and IPv6 through the same interface and support all xfrm modes (tunnel, transport and beet) on it. Co-developed-by: Lorenzo Colitti <lorenzo@google.com> Co-developed-by: Benedict Wong <benedictwong@google.com> Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Benedict Wong <benedictwong@google.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Benedict Wong <benedictwong@google.com> Tested-by: Antony Antony <antony@phenome.org> Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
2018-06-23xfrm: Extend the output_mark to support input direction and masking.Steffen Klassert1-0/+2
We already support setting an output mark at the xfrm_state, unfortunately this does not support the input direction and masking the marks that will be applied to the skb. This change adds support applying a masked value in both directions. The existing XFRMA_OUTPUT_MARK number is reused for this purpose and as it is now bi-directional, it is renamed to XFRMA_SET_MARK. An additional XFRMA_SET_MARK_MASK attribute is added for setting the mask. If the attribute mask not provided, it is set to 0xffffffff, keeping the XFRMA_OUTPUT_MARK existing 'full mask' semantics. Co-developed-by: Tobias Brunner <tobias@strongswan.org> Co-developed-by: Eyal Birger <eyal.birger@gmail.com> Co-developed-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Tobias Brunner <tobias@strongswan.org> Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
2018-04-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+6
Minor conflicts in drivers/net/ethernet/mellanox/mlx5/core/en_rep.c, we had some overlapping changes: 1) In 'net' MLX5E_PARAMS_LOG_{SQ,RQ}_SIZE --> MLX5E_REP_PARAMS_LOG_{SQ,RQ}_SIZE 2) In 'net-next' params->log_rq_size is renamed to be params->log_rq_mtu_frames. 3) In 'net-next' params->hard_mtu is added. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23xfrm: Fix transport mode skb control buffer usage.Steffen Klassert1-0/+6
A recent commit introduced a new struct xfrm_trans_cb that is used with the sk_buff control buffer. Unfortunately it placed the structure in front of the control buffer and overlooked that the IPv4/IPv6 control buffer is still needed for some layer 4 protocols. As a result the IPv4/IPv6 control buffer is overwritten with this structure. Fix this by setting a apropriate header in front of the structure. Fixes acf568ee859f ("xfrm: Reinject transport-mode packets ...") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-02-27xfrm: mark kmem_caches as __ro_after_initAlexey Dobriyan1-1/+2
Kmem caches aren't relocated once set up. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-01-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Overlapping changes all over. The mini-qdisc bits were a little bit tricky, however. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-05xfrm: Use __skb_queue_tail in xfrm_trans_queueHerbert Xu1-1/+1
We do not need locking in xfrm_trans_queue because it is designed to use per-CPU buffers. However, the original code incorrectly used skb_queue_tail which takes the lock. This patch switches it to __skb_queue_tail instead. Reported-and-tested-by: Artem Savkov <asavkov@redhat.com> Fixes: acf568ee859f ("xfrm: Reinject transport-mode packets...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-12-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+68
net/ipv6/ip6_gre.c is a case of parallel adds. include/trace/events/tcp.h is a little bit more tricky. The removal of in-trace-macro ifdefs in 'net' paralleled with moving show_tcp_state_name and friends over to include/trace/events/sock.h in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19xfrm: Reinject transport-mode packets through taskletHerbert Xu1-0/+57
This is an old bugbear of mine: https://www.mail-archive.com/netdev@vger.kernel.org/msg03894.html By crafting special packets, it is possible to cause recursion in our kernel when processing transport-mode packets at levels that are only limited by packet size. The easiest one is with DNAT, but an even worse one is where UDP encapsulation is used in which case you just have to insert an UDP encapsulation header in between each level of recursion. This patch avoids this problem by reinjecting tranport-mode packets through a tasklet. Fixes: b05e106698d9 ("[IPV4/6]: Netfilter IPsec input hooks") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-12-01xfrm: Fix xfrm_input() to verify state is valid when (encap_type < 0)Aviv Heller1-1/+11
Code path when (encap_type < 0) does not verify the state is valid before progressing. This will result in a crash if, for instance, x->km.state == XFRM_STATE_ACQ. Fixes: 7785bba299a8 ("esp: Add a software GRO codepath") Signed-off-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-12-01xfrm: Remove redundant state assignment in xfrm_input()Aviv Heller1-1/+0
x is already initialized to the same value, above. Signed-off-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-11-09Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller1-2/+2
Steffen Klassert says: ==================== pull request (net): ipsec 2017-11-09 1) Fix a use after free due to a reallocated skb head. From Florian Westphal. 2) Fix sporadic lookup failures on labeled IPSEC. From Florian Westphal. 3) Fix a stack out of bounds when a socket policy is applied to an IPv6 socket that sends IPv4 packets. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02xfrm: defer daddr pointer assignment after spi parsingFlorian Westphal1-2/+2
syzbot reports: BUG: KASAN: use-after-free in __xfrm_state_lookup+0x695/0x6b0 Read of size 4 at addr ffff8801d434e538 by task syzkaller647520/2991 [..] __xfrm_state_lookup+0x695/0x6b0 net/xfrm/xfrm_state.c:833 xfrm_state_lookup+0x8a/0x160 net/xfrm/xfrm_state.c:1592 xfrm_input+0x8e5/0x22f0 net/xfrm/xfrm_input.c:302 The use-after-free is the ipv4 destination address, which points to an skb head area that has been reallocated: pskb_expand_head+0x36b/0x1210 net/core/skbuff.c:1494 __pskb_pull_tail+0x14a/0x17c0 net/core/skbuff.c:1877 pskb_may_pull include/linux/skbuff.h:2102 [inline] xfrm_parse_spi+0x3d3/0x4d0 net/xfrm/xfrm_input.c:170 xfrm_input+0xce2/0x22f0 net/xfrm/xfrm_input.c:291 so the real bug is that xfrm_parse_spi() uses pskb_may_pull, but for now do smaller workaround that makes xfrm_input fetch daddr after spi parsing. Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-13vti: fix NULL dereference in xfrm_input()Alexey Kodanev1-2/+4
Can be reproduced with LTP tests: # icmp-uni-vti.sh -p ah -a sha256 -m tunnel -S fffffffe -k 1 -s 10 IPv4: RIP: 0010:xfrm_input+0x7f9/0x870 ... Call Trace: <IRQ> vti_input+0xaa/0x110 [ip_vti] ? skb_free_head+0x21/0x40 vti_rcv+0x33/0x40 [ip_vti] xfrm4_ah_rcv+0x33/0x60 ip_local_deliver_finish+0x94/0x1e0 ip_local_deliver+0x6f/0xe0 ? ip_route_input_noref+0x28/0x50 ... # icmp-uni-vti.sh -6 -p ah -a sha256 -m tunnel -S fffffffe -k 1 -s 10 IPv6: RIP: 0010:xfrm_input+0x7f9/0x870 ... Call Trace: <IRQ> xfrm6_rcv_tnl+0x3c/0x40 vti6_rcv+0xd5/0xe0 [ip6_vti] xfrm6_ah_rcv+0x33/0x60 ip6_input_finish+0xee/0x460 ip6_input+0x3f/0xb0 ip6_rcv_finish+0x45/0xa0 ipv6_rcv+0x34b/0x540 xfrm_input() invokes xfrm_rcv_cb() -> vti_rcv_cb(), the last callback might call skb_scrub_packet(), which in turn can reset secpath. Fix it by adding a check that skb->sp is not NULL. Fixes: 7e9e9202bccc ("xfrm: Clear RX SKB secpath xfrm_offload") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-08-31xfrm: Add support for network devices capable of removing the ESP trailerYossi Kuperman1-0/+5
In conjunction with crypto offload [1], removing the ESP trailer by hardware can potentially improve the performance by avoiding (1) a cache miss incurred by reading the nexthdr field and (2) the necessity to calculate the csum value of the trailer in order to keep skb->csum valid. This patch introduces the changes to the xfrm stack and merely serves as an infrastructure. Subsequent patch to mlx5 driver will put this to a good use. [1] https://www.mail-archive.com/netdev@vger.kernel.org/msg175733.html Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-08-02xfrm: Clear RX SKB secpath xfrm_offloadIlan Tayari1-0/+2
If an incoming packet undergoes XFRM crypto-offload, its secpath is filled with xfrm_offload struct denoting offload information. If the SKB is then forwarded to a device which supports crypto- offload, the stack wrongfully attempts to offload it (even though the output SA may not exist on the device) due to the leftover secpath xo. Clear the ingress xo by zeroizing secpath->olen just before delivering the decapsulated packet to the network stack. Fixes: d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API") Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-07-04net, xfrm: convert sec_path.refcnt from atomic_t to refcount_tReshetova, Elena1-2/+2
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-2/+39
Pull networking updates from David Millar: "Here are some highlights from the 2065 networking commits that happened this development cycle: 1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri) 2) Add a generic XDP driver, so that anyone can test XDP even if they lack a networking device whose driver has explicit XDP support (me). 3) Sparc64 now has an eBPF JIT too (me) 4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei Starovoitov) 5) Make netfitler network namespace teardown less expensive (Florian Westphal) 6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana) 7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger) 8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky) 9) Multiqueue support in stmmac driver (Joao Pinto) 10) Remove TCP timewait recycling, it never really could possibly work well in the real world and timestamp randomization really zaps any hint of usability this feature had (Soheil Hassas Yeganeh) 11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay Aleksandrov) 12) Add socket busy poll support to epoll (Sridhar Samudrala) 13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso, and several others) 14) IPSEC hw offload infrastructure (Steffen Klassert)" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits) tipc: refactor function tipc_sk_recv_stream() tipc: refactor function tipc_sk_recvmsg() net: thunderx: Optimize page recycling for XDP net: thunderx: Support for XDP header adjustment net: thunderx: Add support for XDP_TX net: thunderx: Add support for XDP_DROP net: thunderx: Add basic XDP support net: thunderx: Cleanup receive buffer allocation net: thunderx: Optimize CQE_TX handling net: thunderx: Optimize RBDR descriptor handling net: thunderx: Support for page recycling ipx: call ipxitf_put() in ioctl error path net: sched: add helpers to handle extended actions qed*: Fix issues in the ptp filter config implementation. qede: Fix concurrency issue in PTP Tx path processing. stmmac: Add support for SIMATIC IOT2000 platform net: hns: fix ethtool_get_strings overflow in hns driver tcp: fix wraparound issue in tcp_lp bpf, arm64: fix jit branch offset related to ldimm64 bpf, arm64: implement jiting of BPF_XADD ...
2017-04-27xfrm: fix GRO for !CONFIG_NETFILTERSabrina Dubroca1-1/+1
In xfrm_input() when called from GRO, async == 0, and we end up skipping the processing in xfrm4_transport_finish(). GRO path will always skip the NF_HOOK, so we don't need the special-case for !NETFILTER during GRO processing. Fixes: 7785bba299a8 ("esp: Add a software GRO codepath") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-14xfrm: Prepare the GRO codepath for hardware offloading.Steffen Klassert1-25/+25
On IPsec hardware offloading, we already get a secpath with valid state attached when the packet enters the GRO handlers. So check for hardware offload and skip the state lookup in this case. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-14xfrm: Add an IPsec hardware offloading APISteffen Klassert1-2/+39
This patch adds all the bits that are needed to do IPsec hardware offload for IPsec states and ESP packets. We add xfrmdev_ops to the net_device. xfrmdev_ops has function pointers that are needed to manage the xfrm states in the hardware and to do a per packet offloading decision. Joint work with: Ilan Tayari <ilant@mellanox.com> Guy Shapiro <guysh@mellanox.com> Yossi Kuperman <yossiku@mellanox.com> Signed-off-by: Guy Shapiro <guysh@mellanox.com> Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15esp: Add a software GRO codepathSteffen Klassert1-5/+26
This patch adds GRO ifrastructure and callbacks for ESP on ipv4 and ipv6. In case the GRO layer detects an ESP packet, the esp{4,6}_gro_receive() function does a xfrm state lookup and calls the xfrm input layer if it finds a matching state. The packet will be decapsulated and reinjected it into layer 2. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15xfrm: Extend the sec_path for IPsec offloadingSteffen Klassert1-0/+2
We need to keep per packet offloading informations across the layers. So we extend the sec_path to carry these for the input and output offload codepath. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15xfrm: Export xfrm_parse_spi.Steffen Klassert1-0/+1
We need it in the ESP offload handlers, so export it. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15xfrm: Add a secpath_set helper.Steffen Klassert1-12/+22
Add a new helper to set the secpath to the skb. This avoids code duplication, as this is used in multiple places. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-09xfrm: input: constify xfrm_input_afinfoFlorian Westphal1-20/+11
Nothing writes to these structures (the module owner was not used). While at it, size xfrm_input_afinfo[] by the highest existing xfrm family (INET6), not AF_MAX. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-01-30xfrm: Add a dummy network device for napi.Steffen Klassert1-1/+11
This patch adds a dummy network device so that we can use gro_cells for IPsec GRO. With this, we handle IPsec GRO with no impact on the generic networking code. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2016-08-11net/xfrm_input: fix possible NULL deref of tunnel.ip6->parms.i_keyAlexey Kodanev1-7/+7
Running LTP 'icmp-uni-basic.sh -6 -p ipcomp -m tunnel' test over openvswitch + veth can trigger kernel panic: BUG: unable to handle kernel NULL pointer dereference at 00000000000000e0 IP: [<ffffffff8169d1d2>] xfrm_input+0x82/0x750 ... [<ffffffff816d472e>] xfrm6_rcv_spi+0x1e/0x20 [<ffffffffa082c3c2>] xfrm6_tunnel_rcv+0x42/0x50 [xfrm6_tunnel] [<ffffffffa082727e>] tunnel6_rcv+0x3e/0x8c [tunnel6] [<ffffffff8169f365>] ip6_input_finish+0xd5/0x430 [<ffffffff8169fc53>] ip6_input+0x33/0x90 [<ffffffff8169f1d5>] ip6_rcv_finish+0xa5/0xb0 ... It seems that tunnel.ip6 can have garbage values and also dereferenced without a proper check, only tunnel.ip4 is being verified. Fix it by adding one more if block for AF_INET6 and initialize tunnel.ip6 with NULL inside xfrm6_rcv_spi() (which is similar to xfrm4_rcv_spi()). Fixes: 049f8e2 ("xfrm: Override skb->mark with tunnel->parm.i_key in xfrm_input") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2016-03-24xfrm: Fix crash observed during device unregistration and decryptionsubashab@codeaurora.org1-0/+3
A crash is observed when a decrypted packet is processed in receive path. get_rps_cpus() tries to dereference the skb->dev fields but it appears that the device is freed from the poison pattern. [<ffffffc000af58ec>] get_rps_cpu+0x94/0x2f0 [<ffffffc000af5f94>] netif_rx_internal+0x140/0x1cc [<ffffffc000af6094>] netif_rx+0x74/0x94 [<ffffffc000bc0b6c>] xfrm_input+0x754/0x7d0 [<ffffffc000bc0bf8>] xfrm_input_resume+0x10/0x1c [<ffffffc000ba6eb8>] esp_input_done+0x20/0x30 [<ffffffc0000b64c8>] process_one_work+0x244/0x3fc [<ffffffc0000b7324>] worker_thread+0x2f8/0x418 [<ffffffc0000bb40c>] kthread+0xe0/0xec -013|get_rps_cpu( | dev = 0xFFFFFFC08B688000, | skb = 0xFFFFFFC0C76AAC00 -> ( | dev = 0xFFFFFFC08B688000 -> ( | name = "...................................................... | name_hlist = (next = 0xAAAAAAAAAAAAAAAA, pprev = 0xAAAAAAAAAAA Following are the sequence of events observed - - Encrypted packet in receive path from netdevice is queued - Encrypted packet queued for decryption (asynchronous) - Netdevice brought down and freed - Packet is decrypted and returned through callback in esp_input_done - Packet is queued again for process in network stack using netif_rx Since the device appears to have been freed, the dereference of skb->dev in get_rps_cpus() leads to an unhandled page fault exception. Fix this by holding on to device reference when queueing packets asynchronously and releasing the reference on call back return. v2: Make the change generic to xfrm as mentioned by Steffen and update the title to xfrm Suggested-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Jerome Stanislaus <jeromes@codeaurora.org> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-23xfrm: Increment statistic counter on inner mode errorSteffen Klassert1-1/+3
Increment the LINUX_MIB_XFRMINSTATEMODEERROR statistic counter to notify about dropped packets if we fail to fetch a inner mode. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>