| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull networking updates from David Miller:
"Highlights:
- Gustavo A. R. Silva keeps working on the implicit switch fallthru
changes.
- Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
Luca Coelho.
- Re-enable ASPM in r8169, from Kai-Heng Feng.
- Add virtual XFRM interfaces, which avoids all of the limitations of
existing IPSEC tunnels. From Steffen Klassert.
- Convert GRO over to use a hash table, so that when we have many
flows active we don't traverse a long list during accumluation.
- Many new self tests for routing, TC, tunnels, etc. Too many
contributors to mention them all, but I'm really happy to keep
seeing this stuff.
- Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.
- Lots of cleanups and fixes in L2TP code from Guillaume Nault.
- Add IPSEC offload support to netdevsim, from Shannon Nelson.
- Add support for slotting with non-uniform distribution to netem
packet scheduler, from Yousuk Seung.
- Add UDP GSO support to mlx5e, from Boris Pismenny.
- Support offloading of Team LAG in NFP, from John Hurley.
- Allow to configure TX queue selection based upon RX queue, from
Amritha Nambiar.
- Support ethtool ring size configuration in aquantia, from Anton
Mikaev.
- Support DSCP and flowlabel per-transport in SCTP, from Xin Long.
- Support list based batching and stack traversal of SKBs, this is
very exciting work. From Edward Cree.
- Busyloop optimizations in vhost_net, from Toshiaki Makita.
- Introduce the ETF qdisc, which allows time based transmissions. IGB
can offload this in hardware. From Vinicius Costa Gomes.
- Add parameter support to devlink, from Moshe Shemesh.
- Several multiplication and division optimizations for BPF JIT in
nfp driver, from Jiong Wang.
- Lots of prepatory work to make more of the packet scheduler layer
lockless, when possible, from Vlad Buslov.
- Add ACK filter and NAT awareness to sch_cake packet scheduler, from
Toke Høiland-Jørgensen.
- Support regions and region snapshots in devlink, from Alex Vesker.
- Allow to attach XDP programs to both HW and SW at the same time on
a given device, with initial support in nfp. From Jakub Kicinski.
- Add TLS RX offload and support in mlx5, from Ilya Lesokhin.
- Use PHYLIB in r8169 driver, from Heiner Kallweit.
- All sorts of changes to support Spectrum 2 in mlxsw driver, from
Ido Schimmel.
- PTP support in mv88e6xxx DSA driver, from Andrew Lunn.
- Make TCP_USER_TIMEOUT socket option more accurate, from Jon
Maxwell.
- Support for templates in packet scheduler classifier, from Jiri
Pirko.
- IPV6 support in RDS, from Ka-Cheong Poon.
- Native tproxy support in nf_tables, from Máté Eckl.
- Maintain IP fragment queue in an rbtree, but optimize properly for
in-order frags. From Peter Oskolkov.
- Improvde handling of ACKs on hole repairs, from Yuchung Cheng"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
hv/netvsc: Fix NULL dereference at single queue mode fallback
net: filter: mark expected switch fall-through
xen-netfront: fix warn message as irq device name has '/'
cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
net: dsa: mv88e6xxx: missing unlock on error path
rds: fix building with IPV6=m
inet/connection_sock: prefer _THIS_IP_ to current_text_addr
net: dsa: mv88e6xxx: bitwise vs logical bug
net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
ieee802154: hwsim: using right kind of iteration
net: hns3: Add vlan filter setting by ethtool command -K
net: hns3: Set tx ring' tc info when netdev is up
net: hns3: Remove tx ring BD len register in hns3_enet
net: hns3: Fix desc num set to default when setting channel
net: hns3: Fix for phy link issue when using marvell phy driver
net: hns3: Fix for information of phydev lost problem when down/up
net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
net: hns3: Add support for serdes loopback selftest
bnxt_en: take coredump_record structure off stack
...
|
|
Pull SELinux updates from Paul Moore:
"There are 16 patches in here but really only one that is of any
significance. That one patch is by nixiaoming and fixes a few places
where we were not properly cleaning up dentry and inode objects in the
selinuxfs error handling code. The rest are either printk->pr_*
conversions, constification tweaks, and a minor tweak to MAINTAINERS.
Everything passes the selinux-testsuite and looks to merge cleanly
against your master branch"
* tag 'selinux-pr-20180814' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: cleanup dentry and inodes on error in selinuxfs
selinux: constify write_op[]
selinux: Cleanup printk logging in netnode
selinux: Cleanup printk logging in avc
selinux: Cleanup printk logging in netif
selinux: Cleanup printk logging in netport
selinux: Cleanup printk logging in sidtab
selinux: Cleanup printk logging in netlink
selinux: Cleanup printk logging in selinuxfs
selinux: Cleanup printk logging in services
selinux: Cleanup printk logging in avtab
selinux: Cleanup printk logging in hooks
selinux: Cleanup printk logging in policydb
selinux: Cleanup printk logging in ebitmap
selinux: Cleanup printk logging in conditional
MAINTAINERS: update the LSM and SELinux subsystems
|
|
Pull security subsystem updates from James Morris:
- kstrdup() return value fix from Eric Biggers
- Add new security_load_data hook to differentiate security checking of
kernel-loaded binaries in the case of there being no associated file
descriptor, from Mimi Zohar.
- Add ability to IMA to specify a policy at build-time, rather than
just via command line params or by loading a custom policy, from
Mimi.
- Allow IMA and LSMs to prevent sysfs firmware load fallback (e.g. if
using signed firmware), from Mimi.
- Allow IMA to deny loading of kexec kernel images, as they cannot be
measured by IMA, from Mimi.
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
security: check for kstrdup() failure in lsm_append()
security: export security_kernel_load_data function
ima: based on policy warn about loading firmware (pre-allocated buffer)
module: replace the existing LSM hook in init_module
ima: add build time policy
ima: based on policy require signed firmware (sysfs fallback)
firmware: add call to LSM hook before firmware sysfs fallback
ima: based on policy require signed kexec kernel images
kexec: add call to LSM hook in original kexec_load syscall
security: define new LSM hook named security_kernel_load_data
MAINTAINERS: remove the outdated "LINUX SECURITY MODULE (LSM) FRAMEWORK" entry
|
|
Pull vfs open-related updates from Al Viro:
- "do we need fput() or put_filp()" rules are gone - it's always fput()
now. We keep track of that state where it belongs - in ->f_mode.
- int *opened mess killed - in finish_open(), in ->atomic_open()
instances and in fs/namei.c code around do_last()/lookup_open()/atomic_open().
- alloc_file() wrappers with saner calling conventions are introduced
(alloc_file_clone() and alloc_file_pseudo()); callers converted, with
much simplification.
- while we are at it, saner calling conventions for path_init() and
link_path_walk(), simplifying things inside fs/namei.c (both on
open-related paths and elsewhere).
* 'work.open3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits)
few more cleanups of link_path_walk() callers
allow link_path_walk() to take ERR_PTR()
make path_init() unconditionally paired with terminate_walk()
document alloc_file() changes
make alloc_file() static
do_shmat(): grab shp->shm_file earlier, switch to alloc_file_clone()
new helper: alloc_file_clone()
create_pipe_files(): switch the first allocation to alloc_file_pseudo()
anon_inode_getfile(): switch to alloc_file_pseudo()
hugetlb_file_setup(): switch to alloc_file_pseudo()
ocxlflash_getfile(): switch to alloc_file_pseudo()
cxl_getfile(): switch to alloc_file_pseudo()
... and switch shmem_file_setup() to alloc_file_pseudo()
__shmem_file_setup(): reorder allocations
new wrapper: alloc_file_pseudo()
kill FILE_{CREATED,OPENED}
switch atomic_open() and lookup_open() to returning 0 in all success cases
document ->atomic_open() changes
->atomic_open(): return 0 in all success cases
get rid of 'opened' in path_openat() and the helpers downstream
...
|
|
If the resource requested by d_alloc_name is not added to the linked
list through d_add, then dput needs to be called to release the
subsequent abnormal branch to avoid resource leakage.
Add missing dput to selinuxfs.c
Signed-off-by: nixiaoming <nixiaoming@huawei.com>
[PM: tweak the subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Allow user to create, destroy, get and dump chain objects. Do that by
extending rtnl commands by the chain-specific ones. User will now be
able to explicitly create or destroy chains (so far this was done only
automatically according the filter/act needs and refcounting). Also, the
user will receive notification about any chain creation or destuction.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
write_op[] is never modified, so make it 'const'.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Both the init_module and finit_module syscalls call either directly
or indirectly the security_kernel_read_file LSM hook. This patch
replaces the direct call in init_module with a call to the new
security_kernel_load_data hook and makes the corresponding changes
in SELinux, LoadPin, and IMA.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Pull selinux fix from Paul Moore:
"One fairly straightforward patch to fix a longstanding issue where a
process could stall while accessing files in selinuxfs and block
everyone else due to a held mutex.
The patch passes all our tests and looks to apply cleanly to your
current tree"
* tag 'selinux-pr-20180629' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: move user accesses in selinuxfs out of locked regions
|
|
If a user is accessing a file in selinuxfs with a pointer to a userspace
buffer that is backed by e.g. a userfaultfd, the userspace access can
stall indefinitely, which can block fsi->mutex if it is held.
For sel_read_policy(), remove the locking, since this method doesn't seem
to access anything that requires locking.
For sel_read_bool(), move the user access below the locked region.
For sel_write_bool() and sel_commit_bools_write(), move the user access
up above the locked region.
Cc: stable@vger.kernel.org
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: removed an unused variable in sel_read_policy()]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Replace printk with pr_* to avoid checkpatch warnings.
Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Replace printk with pr_* to avoid checkpatch warnings.
Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Replace printk with pr_* to avoid checkpatch warnings.
Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Replace printk with pr_* to avoid checkpatch warnings.
Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Replace printk with pr_* to avoid checkpatch warnings.
Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Replace printk with pr_* to avoid checkpatch warnings.
Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Replace printk with pr_* to avoid checkpatch warnings.
Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Replace printk with pr_* to avoid checkpatch warnings.
Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Replace printk with pr_* to avoid checkpatch warnings.
Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Replace printk with pr_* to avoid checkpatch warnings.
Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Replace printk with pr_* to avoid checkpatch warnings and
replace KERN_CONT with 2 longer prints.
Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
[PM: fixed some missing newlines identified by Joe Perches]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Replace printk with pr_* to avoid checkpatch warnings.
Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Replace printk with pr_* to avoid checkpatch warnings.
Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
As we move stuff around, some doc references are broken. Fix some of
them via this script:
./scripts/documentation-file-ref-check --fix
Manually checked if the produced result is valid, removing a few
false-positives.
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
|
|
The kzalloc() function has a 2-factor argument form, kcalloc(). This
patch replaces cases of:
kzalloc(a * b, gfp)
with:
kcalloc(a * b, gfp)
as well as handling cases of:
kzalloc(a * b * c, gfp)
with:
kzalloc(array3_size(a, b, c), gfp)
as it's slightly less ugly than:
kzalloc_array(array_size(a, b), c, gfp)
This does, however, attempt to ignore constant size factors like:
kzalloc(4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@
(
kzalloc(
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
kzalloc(
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@
(
kzalloc(
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(char) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)
// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@
- kzalloc
+ kcalloc
(
- SIZE * COUNT
+ COUNT, SIZE
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
kzalloc(
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
kzalloc(
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kzalloc(
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@
(
kzalloc(
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
kzalloc(C1 * C2 * C3, ...)
|
kzalloc(
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
kzalloc(sizeof(THING) * C2, ...)
|
kzalloc(sizeof(TYPE) * C2, ...)
|
kzalloc(C1 * C2 * C3, ...)
|
kzalloc(C1 * C2, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- (E1) * E2
+ E1, E2
, ...)
|
- kzalloc
+ kcalloc
(
- (E1) * (E2)
+ E1, E2
, ...)
|
- kzalloc
+ kcalloc
(
- E1 * E2
+ E1, E2
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Pull networking updates from David Miller:
1) Add Maglev hashing scheduler to IPVS, from Inju Song.
2) Lots of new TC subsystem tests from Roman Mashak.
3) Add TCP zero copy receive and fix delayed acks and autotuning with
SO_RCVLOWAT, from Eric Dumazet.
4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
Brouer.
5) Add ttl inherit support to vxlan, from Hangbin Liu.
6) Properly separate ipv6 routes into their logically independant
components. fib6_info for the routing table, and fib6_nh for sets of
nexthops, which thus can be shared. From David Ahern.
7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
messages from XDP programs. From Nikita V. Shirokov.
8) Lots of long overdue cleanups to the r8169 driver, from Heiner
Kallweit.
9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.
10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.
11) Plumb extack down into fib_rules, from Roopa Prabhu.
12) Add Flower classifier offload support to igb, from Vinicius Costa
Gomes.
13) Add UDP GSO support, from Willem de Bruijn.
14) Add documentation for eBPF helpers, from Quentin Monnet.
15) Add TLS tx offload to mlx5, from Ilya Lesokhin.
16) Allow applications to be given the number of bytes available to read
on a socket via a control message returned from recvmsg(), from
Soheil Hassas Yeganeh.
17) Add x86_32 eBPF JIT compiler, from Wang YanQing.
18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
From Björn Töpel.
19) Remove indirect load support from all of the BPF JITs and handle
these operations in the verifier by translating them into native BPF
instead. From Daniel Borkmann.
20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.
21) Allow XDP programs to do lookups in the main kernel routing tables
for forwarding. From David Ahern.
22) Allow drivers to store hardware state into an ELF section of kernel
dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.
23) Various RACK and loss detection improvements in TCP, from Yuchung
Cheng.
24) Add TCP SACK compression, from Eric Dumazet.
25) Add User Mode Helper support and basic bpfilter infrastructure, from
Alexei Starovoitov.
26) Support ports and protocol values in RTM_GETROUTE, from Roopa
Prabhu.
27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
Brouer.
28) Add lots of forwarding selftests, from Petr Machata.
29) Add generic network device failover driver, from Sridhar Samudrala.
* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
strparser: Add __strp_unpause and use it in ktls.
rxrpc: Fix terminal retransmission connection ID to include the channel
net: hns3: Optimize PF CMDQ interrupt switching process
net: hns3: Fix for VF mailbox receiving unknown message
net: hns3: Fix for VF mailbox cannot receiving PF response
bnx2x: use the right constant
Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
enic: fix UDP rss bits
netdev-FAQ: clarify DaveM's position for stable backports
rtnetlink: validate attributes in do_setlink()
mlxsw: Add extack messages for port_{un, }split failures
netdevsim: Add extack error message for devlink reload
devlink: Add extack to reload and port_{un, }split operations
net: metrics: add proper netlink validation
ipmr: fix error path when ipmr_new_table fails
ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
net: hns3: remove unused hclgevf_cfg_func_mta_filter
netfilter: provide udp*_lib_lookup for nf_tproxy
qed*: Utilize FW 8.37.2.0
...
|
|
Pull audit updates from Paul Moore:
"Another reasonable chunk of audit changes for v4.18, thirteen patches
in total.
The thirteen patches can mostly be broken down into one of four
categories: general bug fixes, accessor functions for audit state
stored in the task_struct, negative filter matches on executable
names, and extending the (relatively) new seccomp logging knobs to the
audit subsystem.
The main driver for the accessor functions from Richard are the
changes we're working on to associate audit events with containers,
but I think they have some standalone value too so I figured it would
be good to get them in now.
The seccomp/audit patches from Tyler apply the seccomp logging
improvements from a few releases ago to audit's seccomp logging;
starting with this patchset the changes in
/proc/sys/kernel/seccomp/actions_logged should apply to both the
standard kernel logging and audit.
As usual, everything passes the audit-testsuite and it happens to
merge cleanly with your tree"
[ Heh, except it had trivial merge conflicts with the SELinux tree that
also came in from Paul - Linus ]
* tag 'audit-pr-20180605' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: Fix wrong task in comparison of session ID
audit: use existing session info function
audit: normalize loginuid read access
audit: use new audit_context access funciton for seccomp_actions_logged
audit: use inline function to set audit context
audit: use inline function to get audit context
audit: convert sessionid unset to a macro
seccomp: Don't special case audited processes when logging
seccomp: Audit attempts to modify the actions_logged sysctl
seccomp: Configurable separator for the actions_logged string
seccomp: Separate read and write code for actions_logged sysctl
audit: allow not equal op for audit by executable
audit: add syscall information to FEATURE_CHANGE records
|
|
Pull SELinux updates from Paul Moore:
"SELinux is back with a quiet pull request for v4.18. Three patches,
all small: two cleanups of the SELinux audit records, and one to
migrate to a newly defined type (vm_fault_t).
Everything passes our test suite, and as of about five minutes ago it
merged cleanly with your tree"
* tag 'selinux-pr-20180605' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
audit: normalize MAC_POLICY_LOAD record
audit: normalize MAC_STATUS record
security: selinux: Change return type to vm_fault_t
|
|
Pull security system updates from James Morris:
- incorporate new socketpair() hook into LSM and wire up the SELinux
and Smack modules. From David Herrmann:
"The idea is to allow SO_PEERSEC to be called on AF_UNIX sockets
created via socketpair(2), and return the same information as if
you emulated socketpair(2) via a temporary listener socket.
Right now SO_PEERSEC will return the unlabeled credentials for a
socketpair, rather than the actual credentials of the creating
process."
- remove the unused security_settime LSM hook (Sargun Dhillon).
- remove some stack allocated arrays from the keys code (Tycho
Andersen)
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
dh key: get rid of stack allocated array for zeroes
dh key: get rid of stack allocated array
big key: get rid of stack array allocation
smack: provide socketpair callback
selinux: provide socketpair callback
net: hook socketpair() into LSM
security: add hook for socketpair()
security: remove security_settime
|
|
Pull misc vfs updates from Al Viro:
"Misc bits and pieces not fitting into anything more specific"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: delete unnecessary assignment in vfs_listxattr
Documentation: filesystems: update filesystem locking documentation
vfs: namei: use path_equal() in follow_dotdot()
fs.h: fix outdated comment about file flags
__inode_security_revalidate() never gets NULL opt_dentry
make xattr_getsecurity() static
vfat: simplify checks in vfat_lookup()
get rid of dead code in d_find_alias()
it's SB_BORN, not MS_BORN...
msdos_rmdir(): kill BS comment
remove rpc_rmdir()
fs: avoid fdput() after failed fdget() in vfs_dedupe_file_range()
|
|
Filling in the padding slot in the bpf structure as a bug fix in 'ne'
overlapped with actually using that padding area for something in
'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull SELinux fix from Paul Moore:
"One more small fix for SELinux: a small string length fix found by
KASAN.
I dislike sending patches this late in the release cycle, but this
patch fixes a legitimate problem, is very small, limited in scope, and
well understood.
There are two threads with more information on the problem, the latest
is linked below:
https://marc.info/?t=152723737400001&r=1&w=2
Stephen points out in the thread linked above:
'Such a setxattr() call can only be performed by a process with
CAP_MAC_ADMIN that is also allowed mac_admin permission in SELinux
policy. Consequently, this is never possible on Android (no process
is allowed mac_admin permission, always enforcing) and is only
possible in Fedora/RHEL for a few domains (if enforcing)'"
* tag 'selinux-pr-20180530' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: KASAN: slab-out-of-bounds in xattr_getsecurity
|
|
Call trace:
[<ffffff9203a8d7a8>] dump_backtrace+0x0/0x428
[<ffffff9203a8dbf8>] show_stack+0x28/0x38
[<ffffff920409bfb8>] dump_stack+0xd4/0x124
[<ffffff9203d187e8>] print_address_description+0x68/0x258
[<ffffff9203d18c00>] kasan_report.part.2+0x228/0x2f0
[<ffffff9203d1927c>] kasan_report+0x5c/0x70
[<ffffff9203d1776c>] check_memory_region+0x12c/0x1c0
[<ffffff9203d17cdc>] memcpy+0x34/0x68
[<ffffff9203d75348>] xattr_getsecurity+0xe0/0x160
[<ffffff9203d75490>] vfs_getxattr+0xc8/0x120
[<ffffff9203d75d68>] getxattr+0x100/0x2c8
[<ffffff9203d76fb4>] SyS_fgetxattr+0x64/0xa0
[<ffffff9203a83f70>] el0_svc_naked+0x24/0x28
If user get root access and calls security.selinux setxattr() with an
embedded NUL on a file and then if some process performs a getxattr()
on that file with a length greater than the actual length of the string,
it would result in a panic.
To fix this, add the actual length of the string to the security context
instead of the length passed by the userspace process.
Signed-off-by: Sachin Grover <sgrover@codeaurora.org>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Lots of easy overlapping changes in the confict
resolutions here.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
S390 bpf_jit.S is removed in net-next and had changes in 'net',
since that code isn't used any more take the removal.
TLS data structures split the TX and RX components in 'net-next',
put the new struct members from the bug fix in 'net' into the RX
part.
The 'net-next' tree had some reworking of how the ERSPAN code works in
the GRE tunneling code, overlapping with a one-line headroom
calculation fix in 'net'.
Overlapping changes in __sock_map_ctx_update_elem(), keep the bits
that read the prog members via READ_ONCE() into local variables
before using them.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull vfs fixes from Al Viro:
"Assorted fixes all over the place"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
aio: fix io_destroy(2) vs. lookup_ioctx() race
ext2: fix a block leak
nfsd: vfs_mkdir() might succeed leaving dentry negative unhashed
cachefiles: vfs_mkdir() might succeed leaving dentry negative unhashed
unfuck sysfs_mount()
kernfs: deal with kernfs_fill_super() failures
cramfs: Fix IS_ENABLED typo
befs_lookup(): use d_splice_alias()
affs_lookup: switch to d_splice_alias()
affs_lookup(): close a race with affs_remove_link()
fix breakage caused by d_find_alias() semantics change
fs: don't scan the inode cache before SB_BORN is set
do d_instantiate/unlock_new_inode combinations safely
iov_iter: fix memory leak in pipe_get_pages_alloc()
iov_iter: fix return type of __pipe_get_pages()
|
|
Pull SELinux fixes from Paul Moore:
"A small pull request to fix a few regressions in the SELinux/SCTP code
with applications that call bind() with AF_UNSPEC/INADDR_ANY.
The individual commit descriptions have more information, but the
commits themselves should be self explanatory"
* tag 'selinux-pr-20180516' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: correctly handle sa_family cases in selinux_sctp_bind_connect()
selinux: fix address family in bind() and connect() to match address/port
selinux: add AF_UNSPEC and INADDR_ANY checks to selinux_socket_bind()
|
|
Recognizing that the audit context is an internal audit value, use an
access function to retrieve the audit context pointer for the task
rather than reaching directly into the task struct to get it.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: merge fuzz in auditsc.c and selinuxfs.c, checkpatch.pl fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Allow to pass the socket address structure with AF_UNSPEC family for
compatibility purposes. selinux_socket_bind() will further check it
for INADDR_ANY and selinux_socket_connect_helper() should return
EINVAL.
For a bad address family return EINVAL instead of AFNOSUPPORT error,
i.e. what is expected from SCTP protocol in such case.
Fixes: d452930fd3b9 ("selinux: Add SCTP support")
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Since sctp_bindx() and sctp_connectx() can have multiple addresses,
sk_family can differ from sa_family. Therefore, selinux_socket_bind()
and selinux_socket_connect_helper(), which process sockaddr structure
(address and port), should use the address family from that structure
too, and not from the socket one.
The initialization of the data for the audit record is moved above,
in selinux_socket_bind(), so that there is no duplicate changes and
code.
Fixes: d452930fd3b9 ("selinux: Add SCTP support")
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Commit d452930fd3b9 ("selinux: Add SCTP support") breaks compatibility
with the old programs that can pass sockaddr_in structure with AF_UNSPEC
and INADDR_ANY to bind(). As a result, bind() returns EAFNOSUPPORT error.
This was found with LTP/asapi_01 test.
Similar to commit 29c486df6a20 ("net: ipv4: relax AF_INET check in
bind()"), which relaxed AF_INET check for compatibility, add AF_UNSPEC
case to AF_INET and make sure that the address is INADDR_ANY.
Fixes: d452930fd3b9 ("selinux: Add SCTP support")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
"VFS: don't keep disconnected dentries on d_anon" had a non-trivial
side-effect - d_unhashed() now returns true for those dentries,
making d_find_alias() skip them altogether. For most of its callers
that's fine - we really want a connected alias there. However,
there is a codepath where we relied upon picking such aliases
if nothing else could be found - selinux delayed initialization
of contexts for inodes on already mounted filesystems used to
rely upon that.
Cc: stable@kernel.org # f1ee616214cb "VFS: don't keep disconnected dentries on d_anon"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Make sure to implement the new socketpair callback so the SO_PEERSEC
call on socketpair(2)s will return correct information.
Acked-by: Serge Hallyn <serge@hallyn.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
Buildable skeleton of AF_XDP without any functionality. Just what it
takes to register a new address family.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The audit MAC_POLICY_LOAD record had redundant dangling keywords and was
missing information about which LSM was responsible and its completion
status. While this record is only issued on success, the parser expects
the res= field to be present.
Old record:
type=MAC_POLICY_LOAD msg=audit(1479299795.404:43): policy loaded auid=0 ses=1
Delete the redundant dangling keywords, add the lsm= field and the res=
field.
New record:
type=MAC_POLICY_LOAD msg=audit(1523293846.204:894): auid=0 ses=1 lsm=selinux res=1
See: https://github.com/linux-audit/audit-kernel/issues/47
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
There were two formats of the audit MAC_STATUS record, one of which was more
standard than the other. One listed enforcing status changes and the
other listed enabled status changes with a non-standard label. In
addition, the record was missing information about which LSM was
responsible and the operation's completion status. While this record is
only issued on success, the parser expects the res= field to be present.
old enforcing/permissive:
type=MAC_STATUS msg=audit(1523312831.378:24514): enforcing=0 old_enforcing=1 auid=0 ses=1
old enable/disable:
type=MAC_STATUS msg=audit(1523312831.378:24514): selinux=0 auid=0 ses=1
List both sets of status and old values and add the lsm= field and the
res= field.
Here is the new format:
type=MAC_STATUS msg=audit(1523293828.657:891): enforcing=0 old_enforcing=1 auid=0 ses=1 enabled=1 old-enabled=1 lsm=selinux res=1
This record already accompanied a SYSCALL record.
See: https://github.com/linux-audit/audit-kernel/issues/46
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: 80-char fixes, merge fuzz, use new SELinux state functions]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Use new return type vm_fault_t for fault handler
in struct vm_operations_struct.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
There is a permission discrepancy when consulting msq ipc object
metadata between /proc/sysvipc/msg (0444) and the MSG_STAT shmctl
command. The later does permission checks for the object vs S_IRUGO.
As such there can be cases where EACCESS is returned via syscall but the
info is displayed anyways in the procfs files.
While this might have security implications via info leaking (albeit no
writing to the msq metadata), this behavior goes way back and showing
all the objects regardless of the permissions was most likely an
overlook - so we are stuck with it. Furthermore, modifying either the
syscall or the procfs file can cause userspace programs to break (ie
ipcs). Some applications require getting the procfs info (without root
privileges) and can be rather slow in comparison with a syscall -- up to
500x in some reported cases for shm.
This patch introduces a new MSG_STAT_ANY command such that the msq ipc
object permissions are ignored, and only audited instead. In addition,
I've left the lsm security hook checks in place, as if some policy can
block the call, then the user has no other choice than just parsing the
procfs file.
Link: http://lkml.kernel.org/r/20180215162458.10059-4-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reported-by: Robert Kettler <robert.kettler@outlook.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
Linus Torvalds
nixiaoming
Jiri Pirko
Eric Biggers
Mimi Zohar
Al Viro
Jann Horn
peter enderborg
Mauro Carvalho Chehab
Kees Cook
David S. Miller
Sachin Grover
Richard Guy Briggs
Alexey Kodanev
David Herrmann
Björn Töpel
Souptick Joarder
Davidlohr Bueso