aboutsummaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/wm8960.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-08-16i2c: Make remove callback return voidUwe Kleine-König1-4/+2
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-27ASoC: wm*: Remove now redundant non_legacy_dai_naming flagCharles Keepax1-1/+0
The ASoC core has now been changed to default to the non-legacy DAI naming, as such drivers using the new scheme no longer need to specify the non_legacy_dai_naming flag. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220623125250.2355471-66-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-05-04ASoC: Pull in fixesMark Brown1-1/+14
Cleanups for the dmaengine code build on top of current fixes.
2022-04-28ASoC: wm8960: Add ACPI supportNicola Lunghi1-1/+14
HID made of either Wolfson/CirrusLogic PCI ID + 8960 identifier This helps enumerate the Waveshare WM8960 WM8960 Hi-Fi Sound Card HAT on the Up2 platform. The scripts at https://github.com/thesofproject/acpi-scripts can be used to add the ACPI initrd overlay. This commit is similar to the commit: 960cdd50ca9f ("ASoC: wm8804: Add ACPI support") Signed-off-by: Nicola Lunghi <nick83ola@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220427212916.40145-1-nick83ola@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-06ASoC: wm*: use simple i2c probe functionStephen Kitt1-3/+2
The i2c probe functions here don't use the id information provided in their second argument, so the single-parameter i2c probe function ("probe_new") can be used instead. wm8731.c is excluded and will be submitted separately. This avoids scanning the identifier tables during probes. Signed-off-by: Stephen Kitt <steve@sk2.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220405122411.2096387-1-steve@sk2.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-14ASoC: codec: wm8960: complete discharge on BIAS OFF->STANDBYViorel Suman1-2/+11
On BIAS STANDBY->OFF transition the current implementation sleeps 600ms on suspend in order to discharge the chip. The suspend is propagated from "snd_soc_suspend" call for all audio cards in a serial fashion, thus in case of boards like i.MX8DXL EVK which has 3 distinct WM8960 codecs the total cumulated sleep on suspend is 1.8 seconds. On the other hand the BIAS OFF->STANDBY transition happens asynchronously with regard to "snd_soc_resume" - the call is propagated from "soc_resume_deferred" which is just scheduled from "snd_soc_resume", each card having its own work scheduled to execute "soc_resume_deferred" call. The patch performs discharge completion on BIAS OFF->STANDBY transition so that the cumulated effect on suspend described above is avoided and discharge is completed in paralel in case of multiple WM8960 codecs on the board. Signed-off-by: Viorel Suman <viorel.suman@nxp.com> Link: https://lore.kernel.org/r/20220208121727.4461-1-viorel.suman@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-13ASoC: wm8960: Fix clock configuration on slave modeShengjiu Wang1-3/+10
There is a noise issue for 8kHz sample rate on slave mode. Compared with master mode, the difference is the DACDIV setting, after correcting the DACDIV, the noise is gone. There is no noise issue for 48kHz sample rate, because the default value of DACDIV is correct for 48kHz. So wm8960_configure_clocking() should be functional for ADC and DAC function even if it is slave mode. In order to be compatible for old use case, just add condition for checking that sysclk is zero with slave mode. Fixes: 0e50b51aa22f ("ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/1634102224-3922-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-23Merge remote-tracking branch 'asoc/for-5.13' into asoc-nextMark Brown1-11/+1
2021-03-25ASoC: wm8960: Remove bitclk relax condition in wm8960_configure_sysclkShengjiu Wang1-11/+1
The call sequence in wm8960_configure_clocking is ret = wm8960_configure_sysclk(); if (ret >= 0) goto configure_clock; .... ret = wm8960_configure_pll(); configure_clock: ... wm8960_configure_sysclk is called before wm8960_configure_pll, as there is bitclk relax on both functions, so wm8960_configure_sysclk always return success, then wm8960_configure_pll() never be called. With this case: aplay -Dhw:0,0 -d 5 -r 48000 -f S24_LE -c 2 audio48k24b2c.wav the required bitclk is 48000 * 24 * 2 = 2304000, bitclk got from wm8960_configure_sysclk is 3072000, but if go to wm8960_configure_pll. it can get correct bitclk 2304000. So bitclk relax condition should be removed in wm8960_configure_sysclk, then wm8960_configure_pll can be called, and there is also bitclk relax function in wm8960_configure_pll. Fixes: 3c01b9ee2ab9 ("ASoC: codec: wm8960: Relax bit clock computation") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/1614740862-30196-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-23ASoC: wm8960: Fix wrong bclk and lrclk with pll enabled for some chipsShengjiu Wang1-1/+7
The input MCLK is 12.288MHz, the desired output sysclk is 11.2896MHz and sample rate is 44100Hz, with the configuration pllprescale=2, postscale=sysclkdiv=1, some chip may have wrong bclk and lrclk output with pll enabled in master mode, but with the configuration pllprescale=1, postscale=2, the output clock is correct. >From Datasheet, the PLL performs best when f2 is between 90MHz and 100MHz when the desired sysclk output is 11.2896MHz or 12.288MHz, so sysclkdiv = 2 (f2/8) is the best choice. So search available sysclk_divs from 2 to 1 other than from 1 to 2. Fixes: 84fdc00d519f ("ASoC: codec: wm9860: Refactor PLL out freq search") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/1616150926-22892-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-21ASoC: wm*: sync parameter naming (rate/sample_bits)Kuninori Morimoto1-1/+1
This patch syncs naming rule. - xxx_rates; + xxx_rate; - xxx_samplebits; + xxx_sample_bits; Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87czy6olh0.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-16ASoC: codecs: wm*: merge .digital_mute() into .mute_stream()Kuninori Morimoto1-2/+3
snd_soc_dai_digital_mute() is internally using both mute_stream() (1) or digital_mute() (2), but the difference between these 2 are only handling direction. We can merge digital_mute() into mute_stream int snd_soc_dai_digital_mute(xxx, int direction) { ... else if (dai->driver->ops->mute_stream) (1) return dai->driver->ops->mute_stream(xxx, direction); else if (direction == SNDRV_PCM_STREAM_PLAYBACK && dai->driver->ops->digital_mute) (2) return dai->driver->ops->digital_mute(xxx); ... } Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/87v9ixwiwr.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-09ASoC: codecs: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200709010359.GA18971@embeddedor Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-02ASoC: codecs: wm8960: fix kernel-docPierre-Louis Bossart1-1/+1
Fix W=1 warning Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200701181320.80848-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-22ASoC: codecs: wm*: rename to snd_soc_component_read()Kuninori Morimoto1-10/+10
We need to use snd_soc_component_read() instead of snd_soc_component_read32() This patch renames _read32() to _read() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87eeqf4mcl.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-15ASoC: wm8960: Support headphone jack detection functionShengjiu Wang1-0/+20
Add two platform variables for headphone jack detection. "hp_cfg" is for configuration of heaphone jack detection. "gpio_cfg" is for configuration of gpio, the gpio is used for plug & unplug interrupt on SoC. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1591180013-12416-2-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-21ASoC: wm8960: Fix wrong clock after suspend & resumeShengjiu Wang1-2/+1
After suspend & resume, wm8960_hw_params may be called when bias_level is not SND_SOC_BIAS_ON, then wm8960_configure_clocking is not called. But if sample rate is changed at that time, then the output clock rate will be not correct. So judgement of bias_level is SND_SOC_BIAS_ON in wm8960_hw_params is not necessary and it causes above issue. Fixes: 3176bf2d7ccd ("ASoC: wm8960: update pll and clock setting function") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/1587468525-27514-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-02ASoC: wm8960: Mark expected switch fall-throughGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 115041 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-12ASoC: wm8960: replace codec to componentKuninori Morimoto1-123/+126
Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-30ASoC: codec: wm8960: Relax bit clock computation when using PLLDaniel Baluta1-2/+16
Bitclk is derived from sysclk using bclk_divs. Sysclk can be derived in two ways: (1) directly from MLCK (2) MCLK via PLL Commit 3c01b9ee2ab9d0d ("ASoC: codec: wm8960: Relax bit clock computation") relaxed bitclk computation when sysclk is directly derived from MCLK. Lets do the same thing when sysclk is derived via PLL. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-30ASoC: codec: wm9860: avoid maybe-uninitialized warningDaniel Baluta1-17/+9
The new PLL configuration code triggers a harmless warning: sound/soc/codecs/wm8960.c: In function 'wm8960_configure_clocking': sound/soc/codecs/wm8960.c:735:3: error: 'best_freq_out' may be used uninitialized in this function [-Werror=maybe-uninitialized] wm8960_set_pll(codec, freq_in, best_freq_out); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sound/soc/codecs/wm8960.c:699:12: note: 'best_freq_out' was declared here Fix this by reworking the code such that: 1) When there is no PLL freq available return -EINVAL and make sure *bclk_idx, *dac_idx, *sysclk_idx are initialized with invalid values. 2) When there is a PLL freq available initialize *bclk_idx, *dac_idx and *sysclk_idx with correct values and immediately return the freq available. Fixes: 84fdc00d519f ("ASoC: codec: wm9860: Refactor PLL out freq search") Fixes: 303e8954af8d ("ASoC: codec: wm8960: Stop when a matching PLL freq is found") Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-06ASoC: codec: wm8960: Stop when a matching PLL freq is foundDaniel Baluta1-0/+4
When a matching PLL freq is found, searching continues even this is not necessary. The problem was introduced with the following refactoring commit 84fdc00d519ffd ("ASoC: codec: wm9860: Refactor PLL out freq search) Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-05ASoC: codec: wm9860: Refactor PLL out freq searchDaniel Baluta1-29/+64
Add a separate function for deriving (sysclk, lrclk, bclk) when the clock is auto or pll. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-24ASoC: codec: wm8960: Relax bit clock computationDaniel Baluta1-9/+19
WM8960 derives bit clock from sysclock using BCLKDIV[3:0] of R8 clocking register (See WM8960 datasheet, page 71). There are use cases, like this: aplay -Dhw:0,0 -r 48000 -c 1 -f S20_3LE -t raw audio48k20b_3LE1c.pcm where no BCLKDIV applied to sysclock can give us the exact requested bitclk, so driver fails to configure clocking and aplay fails to run. Fix this by relaxing bitclk computation, so that when no exact value can be derived from sysclk pick the closest value greater than expected bitclk. Suggested-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-24ASoC: codec: wm8960: Refactor sysclk freq searchDaniel Baluta1-19/+61
Add a separate function for finding (sysclk, lrclk, bclk) when the clock is auto or mclk. This makes code easier to read and reduces the indentation level in wm8960_configure_clocking. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-29Merge remote-tracking branches 'asoc/topic/tpa6130a2', 'asoc/topic/ux500', 'asoc/topic/wm8960', 'asoc/topic/wm8962' and 'asoc/topic/wm8991' into asoc-nextMark Brown1-3/+2
2016-09-28ASoC: wm8960: remove usage of obsoleted TLV-related macroTakashi Sakamoto1-3/+2
TLV_DB_RANGE_HEAD macro was obsoleted by commit bf1d1c9b6179 ("ALSA: tlv: add DECLARE_TLV_DB_RANGE()"). This commit removes usage of the macro, with the obsoleting macro renamed to SNDRV_CTL_TLVD_DECLARE_DB_RANGE(). Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-01ASoC: constify snd_soc_codec_driver structuresJulia Lawall1-1/+1
Check for snd_soc_codec_driver structures that are only passed to snd_soc_register_codec or memcpy (2nd arg), for which the corresponding parameters are declared const. Declare as const snd_soc_codec_driver structures that have these properties. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct snd_soc_codec_driver i@p = { ... }; @ok@ identifier r.i; expression e1,e2,e3; position p; @@ ( snd_soc_register_codec(e1,&i@p,e2,e3) | memcpy(e1,&i@p,e2) ) @bad@ position p != {r.p,ok.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct snd_soc_codec_driver i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-10Merge remote-tracking branches 'asoc/fix/rt5659', 'asoc/fix/sigmadsp', 'asoc/fix/simple', 'asoc/fix/wm5110' and 'asoc/fix/wm8960' into asoc-linusMark Brown1-19/+21
2016-01-22ASoC: wm8960: Fix WM8960_SYSCLK_PLL modeStuart Henderson1-15/+17
With the introduction of WM8960_SYSCLK_AUTO mode, WM8960_SYSCLK_PLL mode was made unusable. Ensure we're not PLL mode before trying to use MCLK. Fixes: 3176bf2d7ccd ("ASoC: wm8960: update pll and clock setting function") Signed-off-by: Stuart Henderson <stuart.henderson@cirrus.com> Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-22ASoC: wm8960: Fix input boost mixer left/right namingStuart Henderson1-4/+4
INBMIX1 controls LINPUTs and INBMIX2 controls RINPUTs, so fix the naming accordingly. Signed-off-by: Stuart Henderson <stuart.henderson@cirrus.com> Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-11Merge remote-tracking branch 'asoc/topic/wm8960' into asoc-nextMark Brown1-6/+18
2016-01-08ASoC: wm8960: boost switch should be closed when using L/RINPUT1Zidan Wang1-6/+6
L/RINPUT1 can line to Left/Right Boost Mixer through boost switch. If boost switch is open, there will be no voice when using L/RINPUT1. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-08ASoC: wm8960: add DAC mono mix kcontrolZidan Wang1-0/+3
In normal operation, the left and right channel digital audio data is converted to analogue in two separate DACs. There is a mono-mix mode where the two audio channels are mixed together digitally and then converted to analogue using only one DAC, while the other DAC is switched off. The mono-mix signal can be selected to appear on both analogue output channels. The mono mix is automatically attenuated by 6dB to prevent clipping. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-24ASoC: wm8960: add kcontrol to select ADC data outputZidan Wang1-0/+9
add kcontrol to select ADC data output. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-25Merge remote-tracking branches 'asoc/fix/rt5677', 'asoc/fix/st', 'asoc/fix/sun4i-codec', 'asoc/fix/topology', 'asoc/fix/wm8960' and 'asoc/fix/wm8962' into asoc-linusMark Brown1-1/+1
2015-11-03ASoC: wm8960: Fix the Input PGA Mute switchJongHo Kim1-1/+1
Change the xinvert value from 0 to 1 on the "Capture Switch" control WM8960 datasheet is shown as follows: Bit 7 at 00h and 01h register address 1 : Enable Mute, 0 : Disable Mute Signed-off-by: JongHo Kim <furmuwon@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-26Merge remote-tracking branches 'asoc/topic/wm8904', 'asoc/topic/wm8955' and 'asoc/topic/wm8960' into asoc-nextMark Brown1-1/+1
2015-10-22ASoC: wm8960: harmless underflow in wm8960_put_deemph()Dan Carpenter1-1/+1
We should only accept "deemph" values of zero and one, but by mistake we accept negatives as well. It's harmless but let's clean it up anyway. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-23Merge remote-tracking branches 'asoc/fix/wm8960' and 'asoc/fix/wm8962' into asoc-linusMark Brown1-8/+18
2015-09-19ASoC: wm8960: correct the max register value of mic boost pgaZidan Wang1-2/+2
the max register value of mic boost pga should be 3. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-11ASoC: wm8960: correct gain value for input PGA and add microphone PGAZidan Wang1-6/+16
The input PGAs have a gain range from -17.25dB to +30dB in 0.75dB steps. The boost stage can provide additional gain. For line inputs, -12dB to +6dB gain is available on the boost mixer. For micphone inputs, it can provide up to +29dB additional gain from the microphone PGA. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-11ASoC: wm8960: correct the min gain value of some PGAZidan Wang1-3/+3
The min gain is the corresponding gain value when the register value is 0 instead of 1, just correct it. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-30Merge remote-tracking branches 'asoc/topic/wm8741', 'asoc/topic/wm8753', 'asoc/topic/wm8904', 'asoc/topic/wm8960' and 'asoc/topic/wm8983' into asoc-nextMark Brown1-41/+179
2015-08-11ASoC: wm8960: update pll and clock setting functionZidan Wang1-41/+179
Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-15ASoC: drivers: Drop owner assignment from i2c_driverKrzysztof Kozlowski1-1/+0
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-22Merge tag 'asoc-v4.2' into asoc-nextMark Brown1-11/+114
ASoC: Updates for v4.2 The big thing this release has been Liam's addition of topology support to the core. We've also seen quite a bit of driver work and the continuation of Lars' refactoring for component support. - Support for loading ASoC topology maps from firmware, intended to be used to allow self-describing DSP firmware images to be built which can map controls added by the DSP to userspace without the kernel needing to know about individual DSP firmwares. - Lots of refactoring to avoid direct access to snd_soc_codec where it's not needed supporting future refactoring. - Big refactoring and cleanup serieses for the Wolfson ADSP and TI TAS2552 drivers. - Support for TI TAS571x power amplifiers. - Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs. - Support for x86 systems with RT5650 and Qualcomm Storm. # gpg: Signature made Mon 08 Jun 2015 18:48:37 BST using RSA key ID 5D5487D0 # gpg: Oops: keyid_from_fingerprint: no pubkey # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
2015-06-22Merge remote-tracking branches 'asoc/fix/wm8737', 'asoc/fix/wm8903', 'asoc/fix/wm8955' and 'asoc/fix/wm8960' into asoc-linusMark Brown1-1/+1
2015-06-12ASoC: wm8960: the enum of "DAC Polarity" should be wm8960_enum[1]Zidan Wang1-1/+1
the enum of "DAC Polarity" should be wm8960_enum[1]. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.