| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
For each PC/BCI pair in the JVMTI compiler inlining record table, the
jitdump plugin emits debug line table entries for every source line in
the method preceding that BCI. Instead only emit one source line per
PC/BCI pair. Reported by Ian Rogers. This reduces the .dump size for
SPECjbb from ~230MB to ~40MB.
Signed-off-by: Nick Gasson <nick.gasson@arm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200528054049.13662-1-nick.gasson@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If the Java sources are compiled with -g:none to disable debug
information the perf JVMTI plugin reports a lot of errors like:
java: GetLineNumberTable failed with JVMTI_ERROR_ABSENT_INFORMATION
java: GetLineNumberTable failed with JVMTI_ERROR_ABSENT_INFORMATION
java: GetLineNumberTable failed with JVMTI_ERROR_ABSENT_INFORMATION
java: GetLineNumberTable failed with JVMTI_ERROR_ABSENT_INFORMATION
java: GetLineNumberTable failed with JVMTI_ERROR_ABSENT_INFORMATION
Instead if GetLineNumberTable returns JVMTI_ERROR_ABSENT_INFORMATION
simply skip emitting line number information for that method. Unlike the
previous patch these errors don't affect the jitdump generation, they
just generate a lot of noise.
Similarly for native methods which also don't have line tables.
Signed-off-by: Nick Gasson <nick.gasson@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200427061520.24905-3-nick.gasson@arm.com
[ Moved || operator to the end of the line, not at the start of 2nd if condition ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If a Java class is compiled with -g:none to omit debug information, the
JVMTI plugin won't write jitdump entries for any method in this class
and prints a lot of errors like:
java: GetSourceFileName failed with JVMTI_ERROR_ABSENT_INFORMATION
The call to GetSourceFileName is used to derive the file name `fn`, but
this value is not actually used since commit ca58d7e64bdf ("perf jvmti:
Generate correct debug information for inlined code") which moved the
file name lookup into fill_source_filenames(). So the call to
GetSourceFileName and related code can be safely removed.
Signed-off-by: Nick Gasson <nick.gasson@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200427061520.24905-2-nick.gasson@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We are getting false positive gcc warning when we compile with gcc9 (9.1.1):
CC jvmti/libjvmti.o
In file included from /usr/include/string.h:494,
from jvmti/libjvmti.c:5:
In function ‘strncpy’,
inlined from ‘copy_class_filename.constprop’ at jvmti/libjvmti.c:166:3:
/usr/include/bits/string_fortified.h:106:10: error: ‘__builtin_strncpy’ specified bound depends on the length of the source argument [-Werror=stringop-overflow=]
106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
jvmti/libjvmti.c: In function ‘copy_class_filename.constprop’:
jvmti/libjvmti.c:165:26: note: length computed here
165 | size_t file_name_len = strlen(file_name);
| ^~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
As per Arnaldo's suggestion use strlcpy(), which does the same thing and keeps
gcc silent.
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190531131321.GB1281@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The Compiled Method Load Record (cmlr) is JDK specific interface to
access JVM stack info. This makes the jvmti agent code not compile under
another jdk, which does not support that.
Separating jvmti cmlr check into special feature check, and adding
HAVE_JVMTI_CMLR macro to indicate that.
Mark cmlr code in jvmti/libjvmti.c with HAVE_JVMTI_CMLR, so we can
compile it on system without cmlr support.
This change makes the jvmti compile with java-1.8.0-ibm package. It's
without the line numbers support, but the rest works.
Adding NO_JVMTI_CMLR compile variable for testing.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Gustavo Luiz Duarte <gduarte@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20181121154341.21521-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
tools/perf/jvmti is broken in so far as it generates incorrect debug
information. Specifically it attributes all debug lines to the original
method being output even in the case that some code is being inlined
from elsewhere. This patch fixes the issue.
To test (from within linux/tools/perf):
export JDIR=/usr/lib/jvm/java-8-openjdk-amd64/
make
cat << __EOF > Test.java
public class Test
{
private StringBuilder b = new StringBuilder();
private void loop(int i, String... args)
{
for (String a : args)
b.append(a);
long hc = b.hashCode() * System.nanoTime();
b = new StringBuilder();
b.append(hc);
System.out.printf("Iteration %d = %d\n", i, hc);
}
public void run(String... args)
{
for (int i = 0; i < 10000; ++i)
{
loop(i, args);
}
}
public static void main(String... args)
{
Test t = new Test();
t.run(args);
}
}
__EOF
$JDIR/bin/javac Test.java
./perf record -F 10000 -g -k mono $JDIR/bin/java -agentpath:`pwd`/libperf-jvmti.so Test
./perf inject --jit -i perf.data -o perf.data.jitted
./perf annotate -i perf.data.jitted --stdio | grep Test\.java: | sort -u
Before this patch, Test.java line numbers get reported that are greater
than the number of lines in the Test.java file. They come from the
source file of the inlined function, e.g. java/lang/String.java:1085.
For further validation one can examine those lines in the JDK source
distribution and confirm that they map to inlined functions called by
Test.java.
After this patch, the filename of the inlined function is output
rather than the incorrect original source filename.
Signed-off-by: Ben Gainey <ben.gainey@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Colin King <colin.king@canonical.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 598b7c6919c7 ("perf jit: add source line info support")
Link: http://lkml.kernel.org/r/20171122182541.d25599a3eb1ada3480d142fa@arm.com
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Instead of defining __unused or redefining __maybe_unused.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-4eleto5pih31jw1q4dypm9pf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch improves the usefulness of error messages generated by the
JVMTI interfac.e This can help identify the root cause of a problem by
printing the actual error code. The patch adds a new helper function
called print_error().
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1476356383-30100-2-git-send-email-eranian@google.com
[ Handle failure to convert numeric error to a string in print_error() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch adds source line information support to perf for jitted code.
The source line info must be emitted by the runtime, such as JVMTI.
Perf injects extract the source line info from the jitdump file and adds
the corresponding .debug_lines section in the ELF image generated for
each jitted function.
The source line enables matching any address in the profile with a
source file and line number.
The improvement is visible in perf annotate with the source code
displayed alongside the assembly code.
The dwarf code leverages the support from OProfile which is also
released under GPLv2. Copyright 2007 OProfile authors.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John McCutchan <johnmccutchan@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1448874143-7269-5-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This is a standalone JVMTI library to help profile Java jitted code with perf
record/perf report. The library is not installed or compiled automatically by
perf Makefile. It is not used directly by perf. It is arch agnostic and has
been tested on X86 and ARM. It needs to be used with a Java runtime, such as
OpenJDK, as follows:
$ java -agentpath:libjvmti.so .......
See the "Committer Notes" below on how to build it.
When used this way, java will generate a jitdump binary file in
$HOME/.debug/java/jit/java-jit-*
This binary dump file contains information to help symbolize and
annotate jitted code.
The jitdump information must be injected into the perf.data file
using:
$ perf inject --jit -i perf.data -o perf.data.jitted
This injects the MMAP records to cover the jitted code and also generates
one ELF image for each jitted function. The ELF images are created in the
same subdir as the jitdump file. The MMAP records point there too.
Then, to visualize the function or asm profile, simply use the regular
perf commands:
$ perf report -i perf.data.jitted
or
$ perf annotate -i perf.data.jitted
JVMTI agent code adapted from the OProfile's opagent code.
This version of the JVMTI agent is using the CLOCK_MONOTONIC as the time
source to timestamp jit samples. To correlate with perf_events samples,
it needs to run on kernel 4.0.0-rc5+ or later with the following commit
from Peter Zijlstra:
34f439278cef ("perf: Add per event clockid support")
With this patch recording jitted code is done as follows:
$ perf record -k mono -- java -agentpath:libjvmti.so .......
--------------------------------------------------------------------------
Committer Notes:
Extended testing instructions:
$ cd tools/perf/jvmti/
$ dnf install java-devel
$ make
Then, create some simple java stuff to record some samples:
$ cat hello.java
public class hello {
public static void main(String[] args) {
System.out.println("Hello, World");
}
}
$ javac hello.java
$ java hello
Hello, World
$
And then record it using this jvmti thing:
$ perf record -k mono java -agentpath:/home/acme/git/linux/tools/perf/jvmti/libjvmti.so hello
java: jvmti: jitdump in /home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jit-1908.dump
Hello, World
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.030 MB perf.data (268 samples) ]
$
Now lets insert the PERF_RECORD_MMAP2 records to point jitted mmaps to
files created by the agent:
$ perf inject --jit -i perf.data -o perf.data.jitted
And finally see that it did its job:
$ perf report -D -i perf.data.jitted | grep PERF_RECORD_MMAP2 | tail -5
79197149129422 0xfe10 [0xa0]: PERF_RECORD_MMAP2 1908/1923: [0x7f172428bd60(0x80) @ 0x40 fd:02 1840554 1]: --xs /home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jitted-1908-283.so
79197149235701 0xfeb0 [0xa0]: PERF_RECORD_MMAP2 1908/1923: [0x7f172428ba60(0x180) @ 0x40 fd:02 1840555 1]: --xs /home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jitted-1908-284.so
79197149250558 0xff50 [0xa0]: PERF_RECORD_MMAP2 1908/1923: [0x7f172428b860(0x180) @ 0x40 fd:02 1840556 1]: --xs /home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jitted-1908-285.so
79197149714746 0xfff0 [0xa0]: PERF_RECORD_MMAP2 1908/1923: [0x7f172428b660(0x180) @ 0x40 fd:02 1840557 1]: --xs /home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jitted-1908-286.so
79197149806558 0x10090 [0xa0]: PERF_RECORD_MMAP2 1908/1923: [0x7f172428b460(0x180) @ 0x40 fd:02 1840558 1]: --xs /home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jitted-1908-287.so
$
So:
$ perf report -D -i perf.data | grep PERF_RECORD_MMAP2 | wc -l
Failed to open /tmp/perf-1908.map, continuing without symbols
21
$ perf report -D -i perf.data.jitted | grep PERF_RECORD_MMAP2 | wc -l
307
$ echo $((307 - 21))
286
$
286 extra PERF_RECORD_MMAP2 records.
All for thise tiny, with just one function, ELF files:
$ file /home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jitted-1908-9.so
/home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jitted-1908-9.so: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), corrupted program header size, BuildID[sha1]=ae54a2ebc3ecf0ba547bfc8cabdea1519df5203f, not stripped
$ readelf -sw /home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jitted-1908-9.so
Symbol table '.symtab' contains 2 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000000000040 9 FUNC LOCAL DEFAULT 1 atomic_cmpxchg_long
$
Inserted into the build-id cache:
$ ls -la ~/.debug/.build-id/ae/54a2ebc3ecf0ba547bfc8cabdea1519df5203f
lrwxrwxrwx. 1 acme acme 111 Feb 5 11:30 /home/acme/.debug/.build-id/ae/54a2ebc3ecf0ba547bfc8cabdea1519df5203f -> ../../home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jitted-1908-9.so/ae54a2ebc3ecf0ba547bfc8cabdea1519df5203f
Note: check why 'file' reports that 'corrupted program header size'.
With a stupid java hog to do some profiling:
$ cat hog.java
public class hog {
private static double do_something_else(int i) {
double total = 0;
while (i > 0) {
total += Math.log(i--);
}
return total;
}
private static double do_something(int i) {
double total = 0;
while (i > 0) {
total += Math.sqrt(i--) + do_something_else(i / 100);
}
return total;
}
public static void main(String[] args) {
System.out.println(String.format("%s=%f & %f", args[0],
do_something(Integer.parseInt(args[0])),
do_something_else(Integer.parseInt(args[1]))));
}
}
$ javac hog.java
$ perf record -F 10000 -g -k mono java -agentpath:/home/acme/git/linux/tools/perf/jvmti/libjvmti.so hog 100000 2345000
java: jvmti: jitdump in /home/acme/.debug/jit/java-jit-20160205.XX4sqd14/jit-8670.dump
100000=291561592.669602 & 32050989.778714
[ perf record: Woken up 6 times to write data ]
[ perf record: Captured and wrote 1.536 MB perf.data (12538 samples) ]
$ perf inject --jit -i perf.data -o perf.data.jitted
Looking at the 'perf report' TUI, at one expanded callchain leading
to the jitted code:
$ perf report --no-children -i perf.data.jitted
Samples: 12K of event 'cycles:pp', Event count (approx.): 3829569932
Overhead Comm Shared Object Symbol
- 93.38% java jitted-8670-291.so [.] class hog.do_something_else(int)
class hog.do_something_else(int)
- Interpreter
- 75.86% call_stub
JavaCalls::call_helper
jni_invoke_static
jni_CallStaticVoidMethod
JavaMain
start_thread
- 17.52% JavaCalls::call_helper
jni_invoke_static
jni_CallStaticVoidMethod
JavaMain
start_thread
Signed-off-by: Stephane Eranian <eranian@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John McCutchan <johnmccutchan@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1448874143-7269-4-git-send-email-eranian@google.com
[ Made it build on fedora23, added some build/usage instructions ]
[ Check if filename != NULL in compiled_method_load_cb, fixing segfault ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
Nick Gasson
Jiri Olsa
Jiri Olsa
Ben Gainey
Greg Kroah-Hartman
Arnaldo Carvalho de Melo
Stephane Eranian