aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/util/sort.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-10-04perf tools: Add 'addr' sort keyNamhyung Kim1-0/+38
Sometimes users want to see actual (virtual) address of sampled instructions. Add a new 'addr' sort key to display the raw addresses. $ perf record -o- true | perf report -i- -s addr # To display the perf.data header info, please use --header/--header-only options. # [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.000 MB - ] # # Total Lost Samples: 0 # # Samples: 12 of event 'cycles:u' # Event count (approx.): 252512 # # Overhead Address # ........ .................. # 42.96% 0x7f96f08443d7 29.55% 0x7f96f0859b50 14.76% 0x7f96f0852e02 8.30% 0x7f96f0855028 4.43% 0xffffffff8de01087 Note that it just compares and displays the sample ip. Each process can have a different memory layout and the ip will be different even if they run the same binary. So this sort key is mostly meaningful for per-process profile data. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20220923173142.805896-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-02-16perf report: Add "addr_from" and "addr_to" sort dimensionsStephane Eranian1-0/+128
With the existing symbol_from/symbol_to, branches captured in the same function would be collapsed into a single function if the latencies associated with the each branch (cycles) were all the same. That is the case on Intel Broadwell, for instance. Since Intel Skylake, the latency is captured by hardware and therefore is used to disambiguate branches. Add addr_from/addr_to sort dimensions to sort branches based on their addresses and not the function there are in. The output is still the function name but the offset within the function is provided to uniquely identify each branch. These new sort dimensions also help with annotate because they create different entries in the histogram which, in turn, generates proper branch annotations. Here is an example using AMD's branch sampling: $ perf record -a -b -c 1000037 -e cpu/branch-brs/ test_prg $ perf report Samples: 6M of event 'cpu/branch-brs/', Event count (approx.): 6901276 Overhead Command Source Shared Object Source Symbol Target Symbol Basic Block Cycle 99.65% test_prg test_prg [.] test_thread [.] test_thread - 0.02% test_prg [kernel.vmlinux] [k] asm_sysvec_apic_timer_interrupt [k] error_entry - $ perf report -F overhead,comm,dso,addr_from,addr_to Samples: 6M of event 'cpu/branch-brs/', Event count (approx.): 6901276 Overhead Command Shared Object Source Address Target Address 4.22% test_prg test_prg [.] test_thread+0x3c [.] test_thread+0x4 4.13% test_prg test_prg [.] test_thread+0x4 [.] test_thread+0x3a 4.09% test_prg test_prg [.] test_thread+0x3a [.] test_thread+0x6 4.08% test_prg test_prg [.] test_thread+0x2 [.] test_thread+0x3c 4.06% test_prg test_prg [.] test_thread+0x3e [.] test_thread+0x2 3.87% test_prg test_prg [.] test_thread+0x6 [.] test_thread+0x38 3.84% test_prg test_prg [.] test_thread [.] test_thread+0x3e 3.76% test_prg test_prg [.] test_thread+0x1e [.] test_thread 3.76% test_prg test_prg [.] test_thread+0x38 [.] test_thread+0x8 3.56% test_prg test_prg [.] test_thread+0x22 [.] test_thread+0x1e 3.54% test_prg test_prg [.] test_thread+0x8 [.] test_thread+0x36 3.47% test_prg test_prg [.] test_thread+0x1c [.] test_thread+0x22 3.45% test_prg test_prg [.] test_thread+0x36 [.] test_thread+0xa 3.28% test_prg test_prg [.] test_thread+0x24 [.] test_thread+0x1c 3.25% test_prg test_prg [.] test_thread+0xa [.] test_thread+0x34 3.24% test_prg test_prg [.] test_thread+0x1a [.] test_thread+0x24 3.20% test_prg test_prg [.] test_thread+0x34 [.] test_thread+0xc 3.04% test_prg test_prg [.] test_thread+0x26 [.] test_thread+0x1a 3.01% test_prg test_prg [.] test_thread+0xc [.] test_thread+0x32 2.98% test_prg test_prg [.] test_thread+0x18 [.] test_thread+0x26 2.94% test_prg test_prg [.] test_thread+0x32 [.] test_thread+0xe 2.76% test_prg test_prg [.] test_thread+0x28 [.] test_thread+0x18 2.73% test_prg test_prg [.] test_thread+0xe [.] test_thread+0x30 2.67% test_prg test_prg [.] test_thread+0x30 [.] test_thread+0x10 2.67% test_prg test_prg [.] test_thread+0x16 [.] test_thread+0x28 2.46% test_prg test_prg [.] test_thread+0x10 [.] test_thread+0x2e 2.44% test_prg test_prg [.] test_thread+0x2a [.] test_thread+0x16 2.38% test_prg test_prg [.] test_thread+0x14 [.] test_thread+0x2a 2.32% test_prg test_prg [.] test_thread+0x2e [.] test_thread+0x12 2.28% test_prg test_prg [.] test_thread+0x12 [.] test_thread+0x2c 2.16% test_prg test_prg [.] test_thread+0x2c [.] test_thread+0x14 0.02% test_prg [kernel.vmlinux] [k] asm_sysvec_apic_ti+0x5 [k] error_entry Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Link: http://lore.kernel.org/lkml/20220208211637.2221872-13-eranian@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-02-06perf tools: Apply correct label to user/kernel symbols in branch modeGerman Gomez1-2/+2
In branch mode, the branch symbols were being displayed with incorrect cpumode labels. So fix this. For example, before: # perf record -b -a -- sleep 1 # perf report -b Overhead Command Source Shared Object Source Symbol Target Symbol 0.08% swapper [kernel.kallsyms] [k] rcu_idle_enter [k] cpuidle_enter_state ==> 0.08% cmd0 [kernel.kallsyms] [.] psi_group_change [.] psi_group_change 0.08% cmd1 [kernel.kallsyms] [k] psi_group_change [k] psi_group_change After: # perf report -b Overhead Command Source Shared Object Source Symbol Target Symbol 0.08% swapper [kernel.kallsyms] [k] rcu_idle_enter [k] cpuidle_enter_state 0.08% cmd0 [kernel.kallsyms] [k] psi_group_change [k] pei_group_change 0.08% cmd1 [kernel.kallsyms] [k] psi_group_change [k] psi_group_change Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: German Gomez <german.gomez@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220126105927.3411216-1-german.gomez@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-01-18Merge tag 'perf-tools-for-v5.17-2022-01-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linuxLinus Torvalds1-9/+25
Pull perf tool updates from Arnaldo Carvalho de Melo: "New features: - Add 'trace' subcommand for 'perf ftrace', setting the stage for more 'perf ftrace' subcommands. Not using a subcommand yields the previous behaviour of 'perf ftrace'. - Add 'latency' subcommand to 'perf ftrace', that can use the function graph tracer or a BPF optimized one, via the -b/--use-bpf option. E.g.: $ sudo perf ftrace latency -a -T mutex_lock sleep 1 # DURATION | COUNT | GRAPH | 0 - 1 us | 4596 | ######################## | 1 - 2 us | 1680 | ######### | 2 - 4 us | 1106 | ##### | 4 - 8 us | 546 | ## | 8 - 16 us | 562 | ### | 16 - 32 us | 1 | | 32 - 64 us | 0 | | 64 - 128 us | 0 | | 128 - 256 us | 0 | | 256 - 512 us | 0 | | 512 - 1024 us | 0 | | 1 - 2 ms | 0 | | 2 - 4 ms | 0 | | 4 - 8 ms | 0 | | 8 - 16 ms | 0 | | 16 - 32 ms | 0 | | 32 - 64 ms | 0 | | 64 - 128 ms | 0 | | 128 - 256 ms | 0 | | 256 - 512 ms | 0 | | 512 - 1024 ms | 0 | | 1 - ... s | 0 | | The original implementation of this command was in the bcc tool. - Support --cputype option for hybrid events in 'perf stat'. Improvements: - Call chain improvements for ARM64. - No need to do any affinity setup when profiling pids. - Reduce multiplexing with duration_time in 'perf stat' metrics. - Improve error message for uncore events, stating that some event groups are can only be used in system wide (-a) mode. - perf stat metric group leader fixes/improvements, including arch specific changes to better support Intel topdown events. - Probe non-deprecated sysfs path first, i.e. try the path /sys/devices/system/cpu/cpuN/topology/thread_siblings first, then the old /sys/devices/system/cpu/cpuN/topology/core_cpus. - Disable debuginfod by default in 'perf record', to avoid stalls on distros such as Fedora 35. - Use unbuffered output in 'perf bench' when pipe/tee'ing to a file. - Enable ignore_missing_thread in 'perf trace' Fixes: - Avoid TUI crash when navigating in the annotation of recursive functions. - Fix hex dump character output in 'perf script'. - Fix JSON indentation to 4 spaces standard in the ARM vendor event files. - Fix use after free in metric__new(). - Fix IS_ERR_OR_NULL() usage in the perf BPF loader. - Fix up cross-arch register support, i.e. when printing register names take into account the architecture where the perf.data file was collected. - Fix SMT fallback with large core counts. - Don't lower case MetricExpr when parsing JSON files so as not to lose info such as the ":G" event modifier in metrics. perf test: - Add basic stress test for sigtrap handling to 'perf test'. - Fix 'perf test' failures on s/390 - Enable system wide for metricgroups test in 'perf test´. - Use 3 digits for test numbering now we can have more tests. Arch specific: - Add events for Arm Neoverse N2 in the ARM JSON vendor event files - Support PERF_MEM_LVLNUM encodings in powerpc, that came from a single patch series, where I incorrectly merged the kernel bits, that were then reverted after coordination with Michael Ellerman and Stephen Rothwell. - Add ARM SPE total latency as PERF_SAMPLE_WEIGHT. - Update AMD documentation, with info on raw event encoding. - Add support for global and local variants of the "p_stage_cyc" sort key, applicable to perf.data files collected on powerpc. - Remove duplicate and incorrect aux size checks in the ARM CoreSight ETM code. Refactorings: - Add a perf_cpu abstraction to disambiguate CPUs and CPU map indexes, fixing problems along the way. - Document CPU map methods. UAPI sync: - Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench mem memcpy' - Sync UAPI files with the kernel sources: drm, msr-index, cpufeatures. Build system - Enable warnings through HOSTCFLAGS. - Drop requirement for libstdc++.so for libopencsd check libperf: - Make libperf adopt perf_counts_values__scale() from tools/perf/util/. - Add a stat multiplexing test to libperf" * tag 'perf-tools-for-v5.17-2022-01-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (115 commits) perf record: Disable debuginfod by default perf evlist: No need to do any affinity setup when profiling pids perf cpumap: Add is_dummy() method perf metric: Fix metric_leader perf cputopo: Fix CPU topology reading on s/390 perf metricgroup: Fix use after free in metric__new() libperf tests: Update a use of the new cpumap API perf arm: Fix off-by-one directory path tools arch x86: Sync the msr-index.h copy with the kernel sources tools headers cpufeatures: Sync with the kernel sources tools headers UAPI: Update tools's copy of drm.h header tools arch: Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench mem memcpy' perf pmu-events: Don't lower case MetricExpr perf expr: Add debug logging for literals perf tools: Probe non-deprecated sysfs path 1st perf tools: Fix SMT fallback with large core counts perf cpumap: Give CPUs their own type perf stat: Correct first_shadow_cpu to return index perf script: Fix flipped index and cpu perf c2c: Use more intention revealing iterator ...
2022-01-10perf sort: Include global and local variants for p_stage_cyc sort keyAthira Rajeev1-9/+25
Sort key 'p_stage_cyc' is used to present the latency cycles spent in pipeline stages. perf has local 'p_stage_cyc' sort key to display this info. There is no global variant available for this sort key. The local variant shows latency in a single sample, whereas the global value will be useful to present the total latency (sum of latencies) in the hist entry. It represents the latency number multiplied by the number of samples. Add global ('p_stage_cyc') and local variant ('local_p_stage_cyc') for this sort key. Use 'local_p_stage_cyc' as default option for "mem" sort mode. Also add this to the list of dynamic sort keys and made the "dynamic_headers" and "arch_specific_sort_keys" as static. Reported-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20211203022038.48240-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-06tools/perf: Add '__rel_loc' event field parsing supportMasami Hiramatsu1-0/+2
Add new '__rel_loc' dynamic data location attribute support. This type attribute is similar to the '__data_loc' but records the offset from the field itself. The libtraceevent adds TEP_FIELD_IS_RELATIVE to the 'tep_format_field::flags' with TEP_FIELD_IS_DYNAMIC for'__rel_loc'. Link: https://lkml.kernel.org/r/163757344810.510314.12449413842136229871.stgit@devnote2 Cc: Beau Belgrave <beaub@linux.microsoft.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-11-18perf sort: Fix the 'p_stage_cyc' sort key behaviorNamhyung Kim1-2/+2
andle 'p_stage_cyc' (for pipeline stage cycles) sort key with the same rationale as for the 'weight' and 'local_weight', see the fix in this series for a full explanation. Not sure it also needs the local and global variants. But I couldn't test it actually because I don't have the machine. Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20211105225617.151364-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-18perf sort: Fix the 'ins_lat' sort key behaviorNamhyung Kim1-17/+7
Handle 'ins_lat' (for instruction latency) and 'local_ins_lat' sort keys with the same rationale as for the 'weight' and 'local_weight', see the previous fix in this series for a full explanation. But I couldn't test it actually, so only build tested. Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20211105225617.151364-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-18perf sort: Fix the 'weight' sort key behaviorNamhyung Kim1-17/+7
Currently, the 'weight' field in the perf sample has latency information for some instructions like in memory accesses. And perf tool has 'weight' and 'local_weight' sort keys to display the info. But it's somewhat confusing what it shows exactly. In my understanding, 'local_weight' shows a weight in a single sample, and (global) 'weight' shows a sum of the weights in the hist_entry. For example: $ perf mem record -t load dd if=/dev/zero of=/dev/null bs=4k count=1M $ perf report --stdio -n -s +local_weight ... # # Overhead Samples Command Shared Object Symbol Local Weight # ........ ....... ....... ................ ......................... ............ # 21.23% 313 dd [kernel.vmlinux] [k] lockref_get_not_zero 32 12.43% 183 dd [kernel.vmlinux] [k] lockref_get_not_zero 35 11.97% 159 dd [kernel.vmlinux] [k] lockref_get_not_zero 36 10.40% 141 dd [kernel.vmlinux] [k] lockref_put_return 32 7.63% 113 dd [kernel.vmlinux] [k] lockref_get_not_zero 33 6.37% 92 dd [kernel.vmlinux] [k] lockref_get_not_zero 34 6.15% 90 dd [kernel.vmlinux] [k] lockref_put_return 33 ... So let's look at the 'lockref_get_not_zero' symbols. The top entry shows that 313 samples were captured with 'local_weight' 32, so the total weight should be 313 x 32 = 10016. But it's not the case: $ perf report --stdio -n -s +local_weight,weight -S lockref_get_not_zero ... # # Overhead Samples Command Shared Object Local Weight Weight # ........ ....... ....... ................ ............ ...... # 1.36% 4 dd [kernel.vmlinux] 36 144 0.47% 4 dd [kernel.vmlinux] 37 148 0.42% 4 dd [kernel.vmlinux] 32 128 0.40% 4 dd [kernel.vmlinux] 34 136 0.35% 4 dd [kernel.vmlinux] 36 144 0.34% 4 dd [kernel.vmlinux] 35 140 0.30% 4 dd [kernel.vmlinux] 36 144 0.30% 4 dd [kernel.vmlinux] 34 136 0.30% 4 dd [kernel.vmlinux] 32 128 0.30% 4 dd [kernel.vmlinux] 32 128 ... With the 'weight' sort key, it's divided to 4 samples even with the same info ('comm', 'dso', 'sym' and 'local_weight'). I don't think this is what we want. I found this because of the way it aggregates the 'weight' value. Since it's not a period, we should not add them in the he->stat. Otherwise, two 32 'weight' entries will create a 64 'weight' entry. After that, new 32 'weight' samples don't have a matching entry so it'd create a new entry and make it a 64 'weight' entry again and again. Later, they will be merged into 128 'weight' entries during the hists__collapse_resort() with 4 samples, multiple times like above. Let's keep the weight and display it differently. For 'local_weight', it can show the weight as is, and for (global) 'weight' it can display the number multiplied by the number of samples. With this change, I can see the expected numbers. $ perf report --stdio -n -s +local_weight,weight -S lockref_get_not_zero ... # # Overhead Samples Command Shared Object Local Weight Weight # ........ ....... ....... ................ ............ ..... # 21.23% 313 dd [kernel.vmlinux] 32 10016 12.43% 183 dd [kernel.vmlinux] 35 6405 11.97% 159 dd [kernel.vmlinux] 36 5724 7.63% 113 dd [kernel.vmlinux] 33 3729 6.37% 92 dd [kernel.vmlinux] 34 3128 4.17% 59 dd [kernel.vmlinux] 37 2183 0.08% 1 dd [kernel.vmlinux] 269 269 0.08% 1 dd [kernel.vmlinux] 38 38 Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20211105225617.151364-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-15perf report: Free generated help strings for sort optionRiccardo Mancini1-1/+1
ASan reports the memory leak of the strings allocated by sort_help() when running perf report. This patch changes the returned pointer to char* (instead of const char*), saves it in a temporary variable, and finally deallocates it at function exit. Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: 702fb9b415e7c99b ("perf report: Show all sort keys in help output") Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/a38b13f02812a8a6759200b9063c6191337f44d4.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-26perf sort: Display sort dimension p_stage_cyc only on supported archsAthira Rajeev1-0/+19
The sort dimension "p_stage_cyc" is used to represent pipeline stage cycle information. Presently, this is used only in powerpc. For unsupported platforms, we don't want to display it in the perf report output columns. Hence add check in sort_dimension__add() and skip the sort key incase it is not applicable for the particular arch. Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Link: https://lore.kernel.org/r/1616425047-1666-6-git-send-email-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-26perf tools: Support pipeline stage cycles for powerpcAthira Rajeev1-2/+22
The pipeline stage cycles details can be recorded on powerpc from the contents of Performance Monitor Unit (PMU) registers. On ISA v3.1 platform, sampling registers exposes the cycles spent in different pipeline stages. Patch adds perf tools support to present two of the cycle counter information along with memory latency (weight). Re-use the field 'ins_lat' for storing the first pipeline stage cycle. This is stored in 'var2_w' field of 'perf_sample_weight'. Add a new field 'p_stage_cyc' to store the second pipeline stage cycle which is stored in 'var3_w' field of perf_sample_weight. Add new sort function 'Pipeline Stage Cycle' and include this in default_mem_sort_order[]. This new sort function may be used to denote some other pipeline stage in another architecture. So add this to list of sort entries that can have dynamic header string. Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Link: https://lore.kernel.org/r/1616425047-1666-5-git-send-email-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-26perf sort: Add dynamic headers for perf report columnsAthira Rajeev1-1/+18
Currently the header string for different columns in perf report is fixed. Some fields of perf sample could have different meaning for different architectures than the meaning conveyed by the header string. An example is the new field 'var2_w' of perf_sample_weight structure. This is presently captured as 'Local INSTR Latency' in perf mem report. But this could be used to denote a different latency cycle in another architecture. Introduce a weak function arch_perf_header_entry() to set the arch specific header string for the fields which can contain dynamic header. If the architecture do not have this function, fall back to the default header string value. Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Link: https://lore.kernel.org/r/1616425047-1666-3-git-send-email-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf report: Fix -F for branch & mem modesRavi Bangoria1-2/+2
perf report fails to add valid additional fields with -F when used with branch or mem modes. Fix it. Before patch: $ perf record -b $ perf report -b -F +srcline_from --stdio Error: Invalid --fields key: `srcline_from' After patch: $ perf report -b -F +srcline_from --stdio # Samples: 8K of event 'cycles' # Event count (approx.): 8784 ... Committer notes: There was an inversion: when looking at branch stack dimensions (keys) it was checking if the sort mode was 'mem', not 'branch'. Fixes: aa6b3c99236b ("perf report: Make -F more strict like -s") Reported-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20210304062958.85465-1-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-02-08perf report: Support instruction latencyKan Liang1-1/+46
The instruction latency information can be recorded on some platforms, e.g., the Intel Sapphire Rapids server. With both memory latency (weight) and the new instruction latency information, users can easily locate the expensive load instructions, and also understand the time spent in different stages. The users can optimize their applications in different pipeline stages. The 'weight' field is shared among different architectures. Reusing the 'weight' field may impacts other architectures. Add a new field to store the instruction latency. Like the 'weight' support, introduce a 'ins_lat' for the global instruction latency, and a 'local_ins_lat' for the local instruction latency version. Add new sort functions, INSTR Latency and Local INSTR Latency, accordingly. Add local_ins_lat to the default_mem_sort_order[]. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/1612296553-21962-7-git-send-email-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-02-08perf tools: Support data block and addr blockKan Liang1-1/+37
Two new data source fields, to indicate the block reasons of a load instruction, are introduced on the Intel Sapphire Rapids server. The fields can be used by the memory profiling. Add a new sort function, SORT_MEM_BLOCKED, for the two fields. For the previous platforms or the block reason is unknown, print "N/A" for the block reason. Add blocked as a default mem sort key for perf report and perf mem report. Committer testing: So in machines without this capability we get a "N/A" filling the new "Blocked" column: $ perf mem record ls arch certs CREDITS Documentation include ipc Kconfig lib MAINTAINERS mm samples security usr block COPYING crypto drivers fs init Kbuild kernel LICENSES Makefile net README scripts sound tools virt [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.008 MB perf.data (17 samples) ] $ $ perf mem report --stdio # To display the perf.data header info, please use --header/--header-only options. # # Total Lost Samples: 0 # # Samples: 6 of event 'cpu/mem-loads,ldlat=30/Pu' # Total weight : 1381 # Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked,blocked # # Overhead Samples Local Weight Memory access Symbol Shared Object Data Symbol Data Object Snoop TLB access Locked Blocked # ........ ....... ............ .................... ....................... ............. ...................... ............ ..... ............ ...... ....... # 32.87% 1 454 Local RAM or RAM hit [.] _dl_relocate_object ld-2.31.so [.] 0x00007fe91cef3078 libc-2.31.so Hit L1 or L2 hit No N/A 25.56% 1 353 LFB or LFB hit [.] strcmp ld-2.31.so [.] 0x00005586973855ca ls None L1 or L2 hit No N/A 22.59% 1 312 LFB or LFB hit [.] _dl_cache_libcmp ld-2.31.so [.] 0x00007fe91d0e3b18 ld.so.cache None L1 or L2 hit No N/A 8.47% 1 117 LFB or LFB hit [.] _dl_relocate_object ld-2.31.so [.] 0x00007fe91ceee570 libc-2.31.so None L1 or L2 hit No N/A 6.88% 1 95 LFB or LFB hit [.] _dl_relocate_object ld-2.31.so [.] 0x00007fe91ceed490 libc-2.31.so None L1 or L2 hit No N/A 3.62% 1 50 LFB or LFB hit [.] _dl_cache_libcmp ld-2.31.so [.] 0x00007fe91d0ebe60 ld.so.cache None L1 or L2 hit No N/A # Samples: 11 of event 'cpu/mem-stores/Pu' # Total weight : 11 # Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked,blocked # # Overhead Samples Local Weight Memory access Symbol Shared Object Data Symbol Data Object Snoop TLB access Locked Blocked # ........ ....... ............ ............. ....................... ............. ...................... ........... ..... .......... ...... ....... # 9.09% 1 0 L1 hit [.] __strcoll_l libc-2.31.so [.] 0x00007fffe5648fc8 [stack] N/A N/A N/A N/A 9.09% 1 0 L1 hit [.] _dl_lookup_symbol_x ld-2.31.so [.] 0x00007fffe56490b8 [stack] N/A N/A N/A N/A 9.09% 1 0 L1 hit [.] _dl_name_match_p ld-2.31.so [.] 0x00007fffe56487d8 [stack] N/A N/A N/A N/A 9.09% 1 0 L1 hit [.] _dl_start ld-2.31.so [.] start_time+0x0 ld-2.31.so N/A N/A N/A N/A 9.09% 1 0 L1 hit [.] _dl_sysdep_start ld-2.31.so [.] 0x00007fffe56494b8 [stack] N/A N/A N/A N/A 9.09% 1 0 L1 hit [.] do_lookup_x ld-2.31.so [.] 0x00007fffe5648ff8 [stack] N/A N/A N/A N/A 9.09% 1 0 L1 hit [.] do_lookup_x ld-2.31.so [.] 0x00007fffe5649064 [stack] N/A N/A N/A N/A 9.09% 1 0 L1 hit [.] do_lookup_x ld-2.31.so [.] 0x00007fffe5649130 [stack] N/A N/A N/A N/A 9.09% 1 0 L1 miss [.] _dl_start ld-2.31.so [.] _rtld_global+0xaf8 ld-2.31.so N/A N/A N/A N/A 9.09% 1 0 L1 miss [.] _dl_start ld-2.31.so [.] _rtld_global+0xc28 ld-2.31.so N/A N/A N/A N/A 9.09% 1 0 L1 miss [.] _dl_start ld-2.31.so [.] 0x00007fffe56495b8 [stack] N/A N/A N/A N/A # (Tip: Show user configuration overrides: perf config --user --list) $ Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/1612296553-21962-4-git-send-email-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-01-20perf report: Add support for PERF_SAMPLE_CODE_PAGE_SIZEStephane Eranian1-0/+26
Add a new sort dimension "code_page_size" for common sort. With this option applied, perf can sort and report by sample's code page size. For example: # perf report --stdio --sort=comm,symbol,code_page_size # To display the perf.data header info, please use # --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 3K of event 'mem-loads:uP' # Event count (approx.): 1470769 # # Overhead Command Symbol Code Page Size IPC [IPC Coverage] # ........ ....... ............................ .............. .................... # 69.56% dtlb [.] GetTickCount 4K - - 17.93% dtlb [.] Calibrate 4K - - 11.40% dtlb [.] __gettimeofday 4K - - # Signed-off-by: Stephane Eranian <eranian@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210105195752.43489-6-kan.liang@linux.intel.com Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-12-19perf sort: Add sort option for data page sizeKan Liang1-0/+30
Add a new sort option "data_page_size" for --mem-mode sort. With this option applied, perf can sort and report by sample's data page size. Here is an example: perf report --stdio --mem-mode --sort=comm,symbol,phys_daddr,data_page_size # To display the perf.data header info, please use # --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 9K of event 'mem-loads:uP' # Total weight : 9028 # Sort order : comm,symbol,phys_daddr,data_page_size # # Overhead Command Symbol Data Physical # Address # Data Page Size # ........ ....... ............................ # ...................... ...................... # 11.19% dtlb [.] touch_buffer [.] 0x00000003fec82ea8 4K 8.61% dtlb [.] GetTickCount [.] 0x00000003c4f2c8a8 4K 4.52% dtlb [.] GetTickCount [.] 0x00000003fec82f58 4K 4.33% dtlb [.] __gettimeofday [.] 0x00000003fec82f48 4K 4.32% dtlb [.] GetTickCount [.] 0x00000003fec82f78 4K 4.28% dtlb [.] GetTickCount [.] 0x00000003fec82f50 4K 4.23% dtlb [.] GetTickCount [.] 0x00000003fec82f70 4K 4.11% dtlb [.] GetTickCount [.] 0x00000003fec82f68 4K 4.00% dtlb [.] Calibrate [.] 0x00000003fec82f98 4K 3.91% dtlb [.] Calibrate [.] 0x00000003fec82f90 4K 3.43% dtlb [.] touch_buffer [.] 0x00000003fec82e98 4K 3.42% dtlb [.] touch_buffer [.] 0x00000003fec82e90 4K 0.09% dtlb [.] DoDependentLoads [.] 0x000000036ea084c0 2M 0.08% dtlb [.] DoDependentLoads [.] 0x000000032b010b80 2M Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Link: http://lore.kernel.org/lkml/20201216185805.9981-3-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-30perf evlist: Use the right prefix for 'struct evlist' evsel list methodsArnaldo Carvalho de Melo1-1/+1
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/, go on completing this split. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-28perf util: Fix memory leak of prefix_if_not_inXie XiuQi1-1/+1
Need to free "str" before return when asprintf() failed to avoid memory leak. Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hongbo Yao <yaohongbo@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Li Bin <huawei.libin@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20200521133218.30150-4-liwei391@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-05perf symbol: Fix kernel symbol address displayThomas Richter1-1/+7
Running commands ./perf record -e rb0000 -- find . ./perf report -v reveals symbol names and its addresses. There is a mismatch between kernel symbol and address. Here is an example for kernel symbol check_chain_key: 3.55% find /lib/modules/.../build/vmlinux 0xf11ec v [k] check_chain_key This address is off by 0xff000 as can be seen with: [root@t35lp46 ~]# fgrep check_chain_key /proc/kallsyms 00000000001f00d0 t check_chain_key [root@t35lp46 ~]# objdump -t ~/linux/vmlinux| fgrep check_chain_key 00000000001f00d0 l F .text 00000000000001e8 check_chain_key [root@t35lp46 ~]# This function is located in main memory 0x1f00d0 - 0x1f02b4. It has several entries in the perf data file with the correct address: [root@t35lp46 perf]# ./perf report -D -i perf.data.find-bad | \ fgrep SAMPLE| fgrep 0x1f01ec PERF_RECORD_SAMPLE(IP, 0x1): 22228/22228: 0x1f01ec period: 1300000 addr: 0 PERF_RECORD_SAMPLE(IP, 0x1): 22228/22228: 0x1f01ec period: 1300000 addr: 0 The root cause happens when reading symbol tables during perf report. A long gdb call chain leads to machine__deliver_events perf_evlist__deliver_event perf_evlist__deliver_sample build_id__mark_dso_hits thread__find_map(1) Read correct address from sample entry map__load dso__load Some more functions to end up in .... dso__load_sym. Function dso__load_syms checks for kernel relocation and symbol adjustment for the kernel and results in kernel map adjustment of kernel .text segment address (0x100000 on s390) kernel .text segment offset in file (0x1000 on s390). This results in all kernel symbol addresses to be changed by subtracting 0xff000 (on s390). For the symbol check_chain_key we end up with 0x1f00d0 - 0x100000 + 0x1000 = 0xf11d0 and this address is saved in the perf symbol table. This calculation is also applied by the mapping functions map__mapip() and map__unmapip() to map IP addresses to dso mappings. During perf report processing functions process_sample_event (builtin-report.c) machine__resolve thread__find_map hist_entry_iter_add are called. Function thread__find_map(1) takes the correct sample address and applies the mapping function map__mapip() from the kernel dso and saves the modified address in struct addr_location for further reference. From now on this address is used. Funktion process_sample_event() then calls hist_entry_iter_add() to save the address in member ip of struct hist_entry. When samples are displayed using perf_evlist__tty_browse_hists hists__fprintf hist_entry__fprintf hist_entry__snprintf __hist_entry__snprintf _hist_entry__sym_snprintf() This simply displays the address of the symbol and ignores the dso <-> map mappings done in function thread__find_map. This leads to the address mismatch. Output before: ot@t35lp46 perf]# ./perf report -v | fgrep check_chain_key 3.55% find /lib/modules/5.6.0d-perf+/build/vmlinux 0xf11ec v [k] check_chain_key [root@t35lp46 perf]# Output after: [root@t35lp46 perf]# ./perf report -v | fgrep check_chain_key 3.55% find /lib/modules/5.6.0d-perf+/build/vmlinux 0x1f01ec v [k] check_chain_key [root@t35lp46 perf]# Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: http://lore.kernel.org/lkml/20200415070744.59919-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-05perf evsel: Rename perf_evsel__{prev,next}() to evsel__{prev,next}()Arnaldo Carvalho de Melo1-1/+1
As those are 'struct evsel' methods, not part of tools/lib/perf/, aka libperf, to whom the perf_ prefix belongs. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-18perf hist: Add fast path for duplicate entries checkKan Liang1-1/+1
Perf checks the duplicate entries in a callchain before adding an entry. However the check is very slow especially with deeper call stack. Almost ~50% elapsed time of perf report is spent on the check when the call stack is always depth of 32. The hist_entry__cmp() is used to compare the new entry with the old entries. It will go through all the available sorts in the sort_list, and call the specific cmp of each sort, which is very slow. Actually, for most cases, there are no duplicate entries in callchain. The symbols are usually different. It's much faster to do a quick check for symbols first. Only do the full cmp when the symbols are exactly the same. The quick check is only to check symbols, not dso. Export _sort__sym_cmp. $ perf record --call-graph lbr ./tchain_edit_64 Without the patch $time perf report --stdio real 0m21.142s user 0m21.110s sys 0m0.033s With the patch $time perf report --stdio real 0m10.977s user 0m10.948s sys 0m0.027s Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pavel Gerasimov <pavel.gerasimov@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com> Link: http://lore.kernel.org/lkml/20200319202517.23423-18-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-03perf report: Add 'cgroup' sort keyNamhyung Kim1-0/+37
The cgroup sort key is to show cgroup membership of each task. Currently it shows full path in the cgroupfs (not relative to the root of cgroup namespace) since it'd be more intuitive IMHO. Otherwise root cgroup in different namespaces will all show same name - "/". The cgroup sort key should come before cgroup_id otherwise sort_dimension__add() will match it to cgroup_id as it only matches with the given substring. For example it will look like following. Note that record patch adding --all-cgroups patch will come later. $ perf record -a --namespace --all-cgroups cgtest [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.208 MB perf.data (4090 samples) ] $ perf report -s cgroup_id,cgroup,pid ... # Overhead cgroup id (dev/inode) Cgroup Pid:Command # ........ ..................... .......... ............... # 93.96% 0/0x0 / 0:swapper 1.25% 3/0xeffffffb / 278:looper0 0.86% 3/0xf000015f /sub/cgrp1 280:cgtest 0.37% 3/0xf0000160 /sub/cgrp2 281:cgtest 0.34% 3/0xf0000163 /sub/cgrp3 282:cgtest 0.22% 3/0xeffffffb /sub 278:looper0 0.20% 3/0xeffffffb / 280:cgtest 0.15% 3/0xf0000163 /sub/cgrp3 285:looper3 Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200325124536.2800725-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-23perf report: Print al_addr when symbol is not foundJin Yao1-2/+4
For branch mode, if the symbol is not found, it prints the address. For example, 0x0000555eee0365a0 in below output. Overhead Command Source Shared Object Source Symbol Target Symbol 17.55% div libc-2.27.so [.] __random [.] __random 6.11% div div [.] 0x0000555eee0365a0 [.] rand 6.10% div libc-2.27.so [.] rand [.] 0x0000555eee036769 5.80% div libc-2.27.so [.] __random_r [.] __random 5.72% div libc-2.27.so [.] __random [.] __random_r 5.62% div libc-2.27.so [.] __random_r [.] __random_r 5.38% div libc-2.27.so [.] __random [.] rand 4.56% div libc-2.27.so [.] __random [.] __random 4.49% div div [.] 0x0000555eee036779 [.] 0x0000555eee0365ff 4.25% div div [.] 0x0000555eee0365fa [.] 0x0000555eee036760 But it's not very easy to understand what the instructions are in the binary. So this patch uses the al_addr instead. With this patch, the output is Overhead Command Source Shared Object Source Symbol Target Symbol 17.55% div libc-2.27.so [.] __random [.] __random 6.11% div div [.] 0x00000000000005a0 [.] rand 6.10% div libc-2.27.so [.] rand [.] 0x0000000000000769 5.80% div libc-2.27.so [.] __random_r [.] __random 5.72% div libc-2.27.so [.] __random [.] __random_r 5.62% div libc-2.27.so [.] __random_r [.] __random_r 5.38% div libc-2.27.so [.] __random [.] rand 4.56% div libc-2.27.so [.] __random [.] __random 4.49% div div [.] 0x0000000000000779 [.] 0x00000000000005ff 4.25% div div [.] 0x00000000000005fa [.] 0x0000000000000760 Now we can use objdump to dump the object starting from 0x5a0. For example, objdump -d --start-address 0x5a0 div 00000000000005a0 <rand@plt>: 5a0: ff 25 2a 0a 20 00 jmpq *0x200a2a(%rip) # 200fd0 <__cxa_finalize@plt+0x200a20> 5a6: 68 02 00 00 00 pushq $0x2 5ab: e9 c0 ff ff ff jmpq 570 <srand@plt-0x10> ... Committer testing: [root@seventh ~]# perf record -a -b sleep 1 [root@seventh ~]# perf report --header-only | grep cpudesc # cpudesc : Intel(R) Core(TM) i5-7500 CPU @ 3.40GHz [root@seventh ~]# perf evlist -v cycles: size: 120, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD|BRANCH_STACK, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, branch_sample_type: ANY [root@seventh ~]# Before: [root@seventh ~]# perf report --stdio --dso libsystemd-shared-241.so | head -20 # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 2K of event 'cycles' # Event count (approx.): 2240 # # Overhead Command Source Shared Object Source Symbol Target Symbol Basic Block Cycles # ........ ............... ........................ ...................... ...................... .................. # 0.13% systemd-journal libc-2.29.so [.] cfree@GLIBC_2.2.5 [.] _int_free 1 0.09% systemd libsystemd-shared-241.so [.] 0x00007fe406465c82 [.] 0x00007fe406465d80 1 0.09% systemd libsystemd-shared-241.so [.] 0x00007fe406465ded [.] 0x00007fe406465c30 1 0.09% systemd libsystemd-shared-241.so [.] 0x00007fe406465e4e [.] 0x00007fe406465de0 1 0.09% systemd-journal systemd-journald [.] free@plt [.] cfree@GLIBC_2.2.5 1 0.09% systemd-journal libc-2.29.so [.] _int_free [.] _int_free 18 0.09% systemd-journal libc-2.29.so [.] _int_free [.] _int_free 2 0.04% systemd libsystemd-shared-241.so [.] bus_resolve@plt [.] bus_resolve 204 0.04% systemd libsystemd-shared-241.so [.] getpid_cached@plt [.] getpid_cached 7 [root@seventh ~]# After: [root@seventh ~]# perf report --stdio --dso libsystemd-shared-241.so | head -20 # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 2K of event 'cycles' # Event count (approx.): 2240 # # Overhead Command Source Shared Object Source Symbol Target Symbol Basic Block Cycles # ........ ............... ........................ ...................... ...................... .................. # 0.13% systemd-journal libc-2.29.so [.] cfree@GLIBC_2.2.5 [.] _int_free 1 0.09% systemd libsystemd-shared-241.so [.] 0x00000000000f7c82 [.] 0x00000000000f7d80 1 0.09% systemd libsystemd-shared-241.so [.] 0x00000000000f7ded [.] 0x00000000000f7c30 1 0.09% systemd libsystemd-shared-241.so [.] 0x00000000000f7e4e [.] 0x00000000000f7de0 1 0.09% systemd-journal systemd-journald [.] free@plt [.] cfree@GLIBC_2.2.5 1 0.09% systemd-journal libc-2.29.so [.] _int_free [.] _int_free 18 0.09% systemd-journal libc-2.29.so [.] _int_free [.] _int_free 2 0.04% systemd libsystemd-shared-241.so [.] bus_resolve@plt [.] bus_resolve 204 0.04% systemd libsystemd-shared-241.so [.] getpid_cached@plt [.] getpid_cached 7 [root@seventh ~]# Lets use -v to get full paths and then try objdump on the unresolved address: [root@seventh ~]# perf report -v --stdio --dso libsystemd-shared-241.so |& grep libsystemd-shared-241.so | tail -1 0.04% systemd-journal /usr/lib/systemd/libsystemd-shared-241.so 0x80c1a B [.] 0x0000000000080c1a 0x80a95 B [.] 0x0000000000080a95 61 [root@seventh ~]# [root@seventh ~]# objdump -d --start-address 0x00000000000f7d80 /usr/lib/systemd/libsystemd-shared-241.so | head -20 /usr/lib/systemd/libsystemd-shared-241.so: file format elf64-x86-64 Disassembly of section .text: 00000000000f7d80 <proc_cmdline_parse_given@@SD_SHARED+0x330>: f7d80: 41 39 11 cmp %edx,(%r9) f7d83: 0f 84 ff fe ff ff je f7c88 <proc_cmdline_parse_given@@SD_SHARED+0x238> f7d89: 4c 8d 05 97 09 0c 00 lea 0xc0997(%rip),%r8 # 1b8727 <utf8_skip_data@@SD_SHARED+0x3147> f7d90: b9 49 00 00 00 mov $0x49,%ecx f7d95: 48 8d 15 c9 f5 0b 00 lea 0xbf5c9(%rip),%rdx # 1b7365 <utf8_skip_data@@SD_SHARED+0x1d85> f7d9c: 31 ff xor %edi,%edi f7d9e: 48 8d 35 9b ff 0b 00 lea 0xbff9b(%rip),%rsi # 1b7d40 <utf8_skip_data@@SD_SHARED+0x2760> f7da5: e8 a6 d6 f4 ff callq 45450 <log_assert_failed_realm@plt> f7daa: 66 0f 1f 44 00 00 nopw 0x0(%rax,%rax,1) f7db0: 41 56 push %r14 f7db2: 41 55 push %r13 f7db4: 41 54 push %r12 f7db6: 55 push %rbp [root@seventh ~]# If we tried the the reported address before this patch: [root@seventh ~]# objdump -d --start-address 0x00007fe406465d80 /usr/lib/systemd/libsystemd-shared-241.so | head -20 /usr/lib/systemd/libsystemd-shared-241.so: file format elf64-x86-64 [root@seventh ~]# Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200227043939.4403-2-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-01-06perf report/top: Improve toggle callchain menu optionArnaldo Carvalho de Melo1-2/+1
Taking into account the current status of the callchain, i.e. if folded, show "Expand", otherwise "Collapse", also show the name of the entry that will be affected and mention the hotkeys for expanding/collapsing all callchains below the main entry, the one that appears with/without callchains. Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-03arm6poo8463k5tfcfp7gkk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-12-04perf report: Make -F more strict like -sRavi Bangoria1-0/+6
Currently -F allows branch-mode / mem-mode fields with -F even when perf report is not running in that mode. Don't allow that. Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20191114132213.5419-3-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-12-04perf report/top TUI: Replace pr_err() with ui__error()Ravi Bangoria1-5/+5
pr_err() in TUI mode does not print anyting on the screen and just quits. Replace such pr_err() with ui__error(). Before: $ perf report -s + $ After: $ perf report -s + ┌─Error:────────────────┐ │Invalid --sort key: `+'│ │ │ │Press any key... │ └───────────────────────┘ Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20191114132213.5419-2-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-19perf dso: Move dso_id from 'struct map' to 'struct dso'Arnaldo Carvalho de Melo1-5/+5
And take it into account when looking up DSOs when we have the dso_id fields obtained from somewhere, like from PERF_RECORD_MMAP2 records. Instances of struct map pointing to the same DSO pathname but with anything in dso_id different are in fact different DSOs, so better have different 'struct dso' instances to reflect that. At some point we may want to get copies of the contents of the different objects if we want to do correct annotation or other analysis. With this we get 'struct map' 24 bytes leaner: $ pahole -C map ~/bin/perf struct map { union { struct rb_node rb_node __attribute__((__aligned__(8))); /* 0 24 */ struct list_head node; /* 0 16 */ } __attribute__((__aligned__(8))); /* 0 24 */ u64 start; /* 24 8 */ u64 end; /* 32 8 */ _Bool erange_warned:1; /* 40: 0 1 */ _Bool priv:1; /* 40: 1 1 */ /* XXX 6 bits hole, try to pack */ /* XXX 3 bytes hole, try to pack */ u32 prot; /* 44 4 */ u64 pgoff; /* 48 8 */ u64 reloc; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ u64 (*map_ip)(struct map *, u64); /* 64 8 */ u64 (*unmap_ip)(struct map *, u64); /* 72 8 */ struct dso * dso; /* 80 8 */ refcount_t refcnt; /* 88 4 */ u32 flags; /* 92 4 */ /* size: 96, cachelines: 2, members: 13 */ /* sum members: 92, holes: 1, sum holes: 3 */ /* sum bitfield members: 2 bits, bit holes: 1, sum bit holes: 6 bits */ /* forced alignments: 1 */ /* last cacheline: 32 bytes */ } __attribute__((__aligned__(8))); $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-g4hxxmraplo7wfjmk384mfsb@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-19perf map: Move comparision of map's dso_id to a separate functionArnaldo Carvalho de Melo1-12/+4
We'll use it when doing DSO lookups using dso_ids. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-u2nr1oq03o0i29w2ay9jx03s@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-19perf map: Move maj/min/ino/ino_generation to separate structArnaldo Carvalho de Melo1-12/+12
And this patch highlights where these fields are being used: in the sort order where it uses it to compare maps and classify samples taking into account not just the DSO, but those DSO id fields. I think these should be used to differentiate DSOs with the same name but different 'struct dso_id' fields, i.e. these fields should move to 'struct dso' and then be used as part of the key when doing lookups for DSOs, in addition to the DSO name. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-8v5isitqy0dup47nnwkpc80f@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-12pref tools: Make 'struct addr_map_symbol' contain 'struct map_symbol'Arnaldo Carvalho de Melo1-48/+41
So that we pass that substructure around and with it consolidate lots of functions that receive a (map, symbol) pair and now can receive just a 'struct map_symbol' pointer. This further paves the way to add 'struct map_groups' to 'struct map_symbol' so that we can have all we need for annotation so that we can ditch 'struct map'->groups, i.e. have the map_groups pointer in a more central place, avoiding the pointer in the 'struct map' that have tons of instances. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-fs90ttd9q12l7989fo7pw81q@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-25libperf: Add perf_evlist__first()/last() functionsJiri Olsa1-1/+1
Add perf_evlist__first()/last() functions to libperf, as internal functions and rename perf's origins to evlist__first/last. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lore.kernel.org/lkml/20190913132355.21634-29-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-31perf symbols: Move mem_info and branch_info out of symbol.hArnaldo Carvalho de Melo1-0/+2
The mem_info struct goes to mem-events.h and branch_info goes to branch.h, where they belong, this way we can remove several headers from symbols.h and trim the include dependency tree more. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-aupw71xnravcsu2xoabfmhpc@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-31perf auxtrace: Uninline functions that touch perf_sessionArnaldo Carvalho de Melo1-0/+1
So that we don't carry the session.h include directive in auxtrace.h, which in turn opens a can of worms of files that were getting all sorts of things via that include, fix them all. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-d2d83aovpgri2z75wlitquni@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-31perf dsos: Move the dsos struct and its methods to separate source filesArnaldo Carvalho de Melo1-0/+1
So that we can reduce the header dependency tree further, in the process noticed that lots of places were getting even things like build-id routines and 'struct perf_tool' definition indirectly, so fix all those too. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-ti0btma9ow5ndrytyoqdk62j@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-31libtraceevent, perf tools: Changes in tep_print_event_* APIsTzvetomir Stoyanov1-1/+2
Libtraceevent APIs for printing various trace events information are complicated, there are complex extra parameters. To control the way event information is printed, the user should call a set of functions in a specific sequence. These APIs are reimplemented to provide a more simple interface for printing event information. Removed APIs: tep_print_event_task() tep_print_event_time() tep_print_event_data() tep_event_info() tep_is_latency_format() tep_set_latency_format() tep_data_latency_format() tep_set_print_raw() A new API for printing event information is introduced: void tep_print_event(struct tep_handle *tep, struct trace_seq *s, struct tep_record *record, const char *fmt, ...); where "fmt" is a printf-like format string, followed by the event fields to be printed. Supported fields: TEP_PRINT_PID, "%d" - event PID TEP_PRINT_CPU, "%d" - event CPU TEP_PRINT_COMM, "%s" - event command string TEP_PRINT_NAME, "%s" - event name TEP_PRINT_LATENCY, "%s" - event latency TEP_PRINT_TIME, %d - event time stamp. A divisor and precision can be specified as part of this format string: "%precision.divisord". Example: "%3.1000d" - divide the time by 1000 and print the first 3 digits before the dot. Thus, the time stamp "123456000" will be printed as "123.456" TEP_PRINT_INFO, "%s" - event information. TEP_PRINT_INFO_RAW, "%s" - event information, in raw format. Example: tep_print_event(tep, s, record, "%16s-%-5d [%03d] %s %6.1000d %s %s", TEP_PRINT_COMM, TEP_PRINT_PID, TEP_PRINT_CPU, TEP_PRINT_LATENCY, TEP_PRINT_TIME, TEP_PRINT_NAME, TEP_PRINT_INFO); Output: ls-11314 [005] d.h. 185207.366383 function __wake_up Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linux-trace-devel@vger.kernel.org Cc: Patrick McLean <chutzpah@gentoo.org> Link: http://lore.kernel.org/linux-trace-devel/20190801074959.22023-2-tz.stoyanov@gmail.com Link: http://lore.kernel.org/lkml/20190805204355.041132030@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-31perf debug: Remove needless include directives from debug.hArnaldo Carvalho de Melo1-0/+1
All we need there is a forward declaration for 'union perf_event', so remove it from there and add missing header directives in places using things from this indirect include. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-7ftk0ztstqub1tirjj8o8xbl@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-29perf tools: Remove debug.h from header files not needing itArnaldo Carvalho de Melo1-0/+1
And fix the fallout, adding it to places that must have it since they use its definitions. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-1s3jel4i26chq2g0lydoz7i3@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-26perf report: Use timestamp__scnprintf_nsec() for time sort keyAndi Kleen1-8/+2
Use timestamp__scnprintf_nsec() to print nanoseconds for the time sort key, instead of open coding. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20190823210338.12360-1-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-26perf srcline: Add missing srcline.h header to files needing its defsArnaldo Carvalho de Melo1-0/+1
When srcline was introduced it wrongly added the include to util/sort.h, even with that header not needing the definitions it provides, fix it by adding it to the places that need it as a pre patch to remove srcline.h from sort.h. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-shuebppedtye8hrgxk15qe3x@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-26perf cacheline: Move cacheline related routines to separate filesArnaldo Carvalho de Melo1-0/+1
To disentangle util/sort.h a bit more. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-6kbf2cauas06rbqp15pyter5@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Move perf_event_attr field from perf's evsel to libperf's perf_evselJiri Olsa1-6/+6
Move the perf_event_attr struct fron 'struct evsel' to 'struct perf_evsel'. Committer notes: Fixed up these: tools/perf/arch/arm/util/auxtrace.c tools/perf/arch/arm/util/cs-etm.c tools/perf/arch/arm64/util/arm-spe.c tools/perf/arch/s390/util/auxtrace.c tools/perf/util/cs-etm.c Also cc1: warnings being treated as errors tests/sample-parsing.c: In function 'do_test': tests/sample-parsing.c:162: error: missing initializer tests/sample-parsing.c:162: error: (near initialization for 'evsel.core.cpus') struct evsel evsel = { .needs_swap = false, - .core.attr = { - .sample_type = sample_type, - .read_format = read_format, + .core = { + . attr = { + .sample_type = sample_type, + .read_format = read_format, + }, [perfbuilder@a70e4eeb5549 /]$ gcc --version |& head -1 gcc (GCC) 4.4.7 Also we don't need to include perf_event.h in tools/perf/lib/include/perf/evsel.h, forward declaring 'struct perf_event_attr' is enough. And this even fixes the build in some systems where things are used somewhere down the include path from perf_event.h without defining __always_inline. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-43-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Add nr_entries to struct perf_evlistJiri Olsa1-1/+1
Move nr_entries count from 'struct perf' to into perf_evlist struct. Committer notes: Fix tools/perf/arch/s390/util/auxtrace.c case. And also the comment in tools/perf/util/annotate.h. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-42-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29perf evlist: Rename struct perf_evlist to struct evlistJiri Olsa1-10/+10
Rename struct perf_evlist to struct evlist, so we don't have a name clash when we add struct perf_evlist in libperf. Committer notes: Added fixes to build on arm64, from Jiri and from me (tools/perf/util/cs-etm.c) Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-6-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29perf evsel: Rename struct perf_evsel to struct evselJiri Olsa1-14/+14
Rename struct perf_evsel to struct evsel, so we don't have a name clash when we add struct perf_evsel in libperf. Committer notes: Added fixes for arm64, provided by Jiri. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-5-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-19perf report: Show all sort keys in help outputAndi Kleen1-0/+52
Show all the supported sort keys in the command line help output, so that it's not needed to refer to the manpage. Before: % perf report -h ... -s, --sort <key[,key2...]> sort by key(s): pid, comm, dso, symbol, parent, cpu, srcline, ... Please refer the man page for the complete list. After: % perf report -h ... -s, --sort <key[,key2...]> sort by key(s): overhead overhead_sys overhead_us overhead_guest_sys overhead_guest_us overhead_children sample period pid comm dso symbol parent cpu ... Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> LPU-Reference: 20190314225002.30108-5-andi@firstfloor.org Link: https://lkml.kernel.org/n/tip-9r3uz2ch4izoi1uln3f889co@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-11perf report: Support time sort keyAndi Kleen1-0/+39
Add a time sort key to perf report to display samples for different time quantums separately. This allows easier analysis of workloads that change over time, and also will allow looking at the context of samples. % perf record ... % perf report --sort time,overhead,symbol --time-quantum 1ms --stdio ... 0.67% 277061.87300 [.] _dl_start 0.50% 277061.87300 [.] f1 0.50% 277061.87300 [.] f2 0.33% 277061.87300 [.] main 0.29% 277061.87300 [.] _dl_lookup_symbol_x 0.29% 277061.87300 [.] dl_main 0.29% 277061.87300 [.] do_lookup_x 0.17% 277061.87300 [.] _dl_debug_initialize 0.17% 277061.87300 [.] _dl_init_paths 0.08% 277061.87300 [.] check_match 0.04% 277061.87300 [.] _dl_count_modids 1.33% 277061.87400 [.] f1 1.33% 277061.87400 [.] f2 1.33% 277061.87400 [.] main 1.17% 277061.87500 [.] main 1.08% 277061.87500 [.] f1 1.08% 277061.87500 [.] f2 1.00% 277061.87600 [.] main 0.83% 277061.87600 [.] f1 0.83% 277061.87600 [.] f2 1.00% 277061.87700 [.] main Committer notes: Rename 'time' argument to hist_time() to htime to overcome this in older distros: cc1: warnings being treated as errors util/hist.c: In function 'hist_time': util/hist.c:251: error: declaration of 'time' shadows a global declaration /usr/include/time.h:186: error: shadowed declaration is here Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20190311144502.15423-4-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-19perf report: Don't shadow inlined symbol with different addr rangeHe Kuang1-2/+8
We can't assume inlined symbols with the same name are equal, because their address range may be different. This will cause the symbols with different addresses be shadowed when adding to the hist entry, and lead to ERANGE error when checking the symbol address during sample parse, the addr should be within the range of [sym.start, sym.end]. The error message is like: "0x36aea60 [0x8]: failed to process type: 68". The second parameter of symbol__new() is the length of the fake symbol for the inline frame, which is the subtraction of the end and start address of base_sym. Signed-off-by: He Kuang <hekuang@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: aa441895f7b4 ("perf report: Compare symbol name for inlined frames when sorting") Link: http://lkml.kernel.org/r/20190219130531.15692-1-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-06perf report: Move symbol annotation to the resort phaseJiri Olsa1-7/+0
Currently we make the annotation for the IPC column during the entry display, already outside of the progress bar scope, so it appears like 'perf report' is stuck. Move the annotation retrieval to the resort phase, so that all the data are ready for display. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190204141808.23031-4-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.