| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* Fix the pKVM stage-1 walker erronously using the stage-2 accessor
* Correctly convert vcpu->kvm to a hyp pointer when generating
an exception in a nVHE+MTE configuration
* Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them
* Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
* Document the boot requirements for FGT when entering the kernel
at EL1
|
|
There are two capabilities related to ring-based dirty page tracking:
KVM_CAP_DIRTY_LOG_RING and KVM_CAP_DIRTY_LOG_RING_ACQ_REL. Both are
supported by x86. However, arm64 supports KVM_CAP_DIRTY_LOG_RING_ACQ_REL
only when the feature is supported on arm64. The userspace doesn't have
to enable the advertised capability, meaning KVM_CAP_DIRTY_LOG_RING can
be enabled on arm64 by userspace and it's wrong.
Fix it by double checking if the capability has been advertised prior to
enabling it. It's rejected to enable the capability if it hasn't been
advertised.
Fixes: 17601bfed909 ("KVM: Add KVM_CAP_DIRTY_LOG_RING_ACQ_REL capability and config option")
Reported-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221031003621.164306-4-gshan@redhat.com
|
|
Reject kvm_gpc_check() and kvm_gpc_refresh() if the cache is inactive.
Not checking the active flag during refresh is particularly egregious, as
KVM can end up with a valid, inactive cache, which can lead to a variety
of use-after-free bugs, e.g. consuming a NULL kernel pointer or missing
an mmu_notifier invalidation due to the cache not being on the list of
gfns to invalidate.
Note, "active" needs to be set if and only if the cache is on the list
of caches, i.e. is reachable via mmu_notifier events. If a relevant
mmu_notifier event occurs while the cache is "active" but not on the
list, KVM will not acquire the cache's lock and so will not serailize
the mmu_notifier event with active users and/or kvm_gpc_refresh().
A race between KVM_XEN_ATTR_TYPE_SHARED_INFO and KVM_XEN_HVM_EVTCHN_SEND
can be exploited to trigger the bug.
1. Deactivate shinfo cache:
kvm_xen_hvm_set_attr
case KVM_XEN_ATTR_TYPE_SHARED_INFO
kvm_gpc_deactivate
kvm_gpc_unmap
gpc->valid = false
gpc->khva = NULL
gpc->active = false
Result: active = false, valid = false
2. Cause cache refresh:
kvm_arch_vm_ioctl
case KVM_XEN_HVM_EVTCHN_SEND
kvm_xen_hvm_evtchn_send
kvm_xen_set_evtchn
kvm_xen_set_evtchn_fast
kvm_gpc_check
return -EWOULDBLOCK because !gpc->valid
kvm_xen_set_evtchn_fast
return -EWOULDBLOCK
kvm_gpc_refresh
hva_to_pfn_retry
gpc->valid = true
gpc->khva = not NULL
Result: active = false, valid = true
3. Race ioctl KVM_XEN_HVM_EVTCHN_SEND against ioctl
KVM_XEN_ATTR_TYPE_SHARED_INFO:
kvm_arch_vm_ioctl
case KVM_XEN_HVM_EVTCHN_SEND
kvm_xen_hvm_evtchn_send
kvm_xen_set_evtchn
kvm_xen_set_evtchn_fast
read_lock gpc->lock
kvm_xen_hvm_set_attr case
KVM_XEN_ATTR_TYPE_SHARED_INFO
mutex_lock kvm->lock
kvm_xen_shared_info_init
kvm_gpc_activate
gpc->khva = NULL
kvm_gpc_check
[ Check passes because gpc->valid is
still true, even though gpc->khva
is already NULL. ]
shinfo = gpc->khva
pending_bits = shinfo->evtchn_pending
CRASH: test_and_set_bit(..., pending_bits)
Fixes: 982ed0de4753 ("KVM: Reinstate gfn_to_pfn_cache with invalidation support")
Cc: stable@vger.kernel.org
Reported-by: : Michal Luczaj <mhal@rbox.co>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013211234.1318131-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move the gfn_to_pfn_cache lock initialization to another helper and
call the new helper during VM/vCPU creation. There are race
conditions possible due to kvm_gfn_to_pfn_cache_init()'s
ability to re-initialize the cache's locks.
For example: a race between ioctl(KVM_XEN_HVM_EVTCHN_SEND) and
kvm_gfn_to_pfn_cache_init() leads to a corrupted shinfo gpc lock.
(thread 1) | (thread 2)
|
kvm_xen_set_evtchn_fast |
read_lock_irqsave(&gpc->lock, ...) |
| kvm_gfn_to_pfn_cache_init
| rwlock_init(&gpc->lock)
read_unlock_irqrestore(&gpc->lock, ...) |
Rename "cache_init" and "cache_destroy" to activate+deactivate to
avoid implying that the cache really is destroyed/freed.
Note, there more races in the newly named kvm_gpc_activate() that will
be addressed separately.
Fixes: 982ed0de4753 ("KVM: Reinstate gfn_to_pfn_cache with invalidation support")
Cc: stable@vger.kernel.org
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
[sean: call out that this is a bug fix]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013211234.1318131-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Although simple_attr_open() fails only with -ENOMEM with current code
base, it would be nicer to return retval of simple_attr_open() directly
in kvm_debugfs_open().
No functional change intended.
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Message-Id: <69d64d93accd1f33691b8a383ae555baee80f943.1665975828.git.houwenlong.hwl@antgroup.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We will introduce the first architecture specific compat vm ioctl in the
next patch. Add all necessary boilerplate to allow architectures to
override compat vm ioctls when necessary.
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-2-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull VFIO updates from Alex Williamson:
- Prune private items from vfio_pci_core.h to a new internal header,
fix missed function rename, and refactor vfio-pci interrupt defines
(Jason Gunthorpe)
- Create consistent naming and handling of ioctls with a function per
ioctl for vfio-pci and vfio group handling, use proper type args
where available (Jason Gunthorpe)
- Implement a set of low power device feature ioctls allowing userspace
to make use of power states such as D3cold where supported (Abhishek
Sahu)
- Remove device counter on vfio groups, which had restricted the page
pinning interface to singleton groups to account for limitations in
the type1 IOMMU backend. Document usage as limited to emulated IOMMU
devices, ie. traditional mdev devices where this restriction is
consistent (Jason Gunthorpe)
- Correct function prefix in hisi_acc driver incurred during previous
refactoring (Shameer Kolothum)
- Correct typo and remove redundant warning triggers in vfio-fsl driver
(Christophe JAILLET)
- Introduce device level DMA dirty tracking uAPI and implementation in
the mlx5 variant driver (Yishai Hadas & Joao Martins)
- Move much of the vfio_device life cycle management into vfio core,
simplifying and avoiding duplication across drivers. This also
facilitates adding a struct device to vfio_device which begins the
introduction of device rather than group level user support and fills
a gap allowing userspace identify devices as vfio capable without
implicit knowledge of the driver (Kevin Tian & Yi Liu)
- Split vfio container handling to a separate file, creating a more
well defined API between the core and container code, masking IOMMU
backend implementation from the core, allowing for an easier future
transition to an iommufd based implementation of the same (Jason
Gunthorpe)
- Attempt to resolve race accessing the iommu_group for a device
between vfio releasing DMA ownership and removal of the device from
the IOMMU driver. Follow-up with support to allow vfio_group to exist
with NULL iommu_group pointer to support existing userspace use cases
of holding the group file open (Jason Gunthorpe)
- Fix error code and hi/lo register manipulation issues in the hisi_acc
variant driver, along with various code cleanups (Longfang Liu)
- Fix a prior regression in GVT-g group teardown, resulting in
unreleased resources (Jason Gunthorpe)
- A significant cleanup and simplification of the mdev interface,
consolidating much of the open coded per driver sysfs interface
support into the mdev core (Christoph Hellwig)
- Simplification of tracking and locking around vfio_groups that fall
out from previous refactoring (Jason Gunthorpe)
- Replace trivial open coded f_ops tests with new helper (Alex
Williamson)
* tag 'vfio-v6.1-rc1' of https://github.com/awilliam/linux-vfio: (77 commits)
vfio: More vfio_file_is_group() use cases
vfio: Make the group FD disassociate from the iommu_group
vfio: Hold a reference to the iommu_group in kvm for SPAPR
vfio: Add vfio_file_is_group()
vfio: Change vfio_group->group_rwsem to a mutex
vfio: Remove the vfio_group->users and users_comp
vfio/mdev: add mdev available instance checking to the core
vfio/mdev: consolidate all the description sysfs into the core code
vfio/mdev: consolidate all the available_instance sysfs into the core code
vfio/mdev: consolidate all the name sysfs into the core code
vfio/mdev: consolidate all the device_api sysfs into the core code
vfio/mdev: remove mtype_get_parent_dev
vfio/mdev: remove mdev_parent_dev
vfio/mdev: unexport mdev_bus_type
vfio/mdev: remove mdev_from_dev
vfio/mdev: simplify mdev_type handling
vfio/mdev: embedd struct mdev_parent in the parent data structure
vfio/mdev: make mdev.h standalone includable
drm/i915/gvt: simplify vgpu configuration management
drm/i915/gvt: fix a memory leak in intel_gvt_init_vgpu_types
...
|
|
SPAPR exists completely outside the normal iommu driver framework, the
groups it creates are fake and are only created to enable VFIO's uAPI.
Thus, it does not need to follow the iommu core rule that the iommu_group
will only be touched while a driver is attached.
Carry a group reference into KVM and have KVM directly manage the lifetime
of this object independently of VFIO. This means KVM no longer relies on
the vfio group file being valid to maintain the group reference.
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v2-15417f29324e+1c-vfio_group_disassociate_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This replaces uses of vfio_file_iommu_group() which were only detecting if
the file is a VFIO file with no interest in the actual group.
The only remaning user of vfio_file_iommu_group() is in KVM for the SPAPR
stuff. It passes the iommu_group into the arch code through kvm for some
reason.
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v2-15417f29324e+1c-vfio_group_disassociate_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
KVM/arm64 updates for v6.1
- Fixes for single-stepping in the presence of an async
exception as well as the preservation of PSTATE.SS
- Better handling of AArch32 ID registers on AArch64-only
systems
- Fixes for the dirty-ring API, allowing it to work on
architectures with relaxed memory ordering
- Advertise the new kvmarm mailing list
- Various minor cleanups and spelling fixes
|
|
In order to differenciate between architectures that require no extra
synchronisation when accessing the dirty ring and those who do,
add a new capability (KVM_CAP_DIRTY_LOG_RING_ACQ_REL) that identify
the latter sort. TSO architectures can obviously advertise both, while
relaxed architectures must only advertise the ACQ_REL version.
This requires some configuration symbol rejigging, with HAVE_KVM_DIRTY_RING
being only indirectly selected by two top-level config symbols:
- HAVE_KVM_DIRTY_RING_TSO for strongly ordered architectures (x86)
- HAVE_KVM_DIRTY_RING_ACQ_REL for weakly ordered architectures (arm64)
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20220926145120.27974-3-maz@kernel.org
|
|
The current implementation of the dirty ring has an implicit requirement
that stores to the dirty ring from userspace must be:
- be ordered with one another
- visible from another CPU executing a ring reset
While these implicit requirements work well for x86 (and any other
TSO-like architecture), they do not work for more relaxed architectures
such as arm64 where stores to different addresses can be freely
reordered, and loads from these addresses not observing writes from
another CPU unless the required barriers (or acquire/release semantics)
are used.
In order to start fixing this, upgrade the ring reset accesses:
- the kvm_dirty_gfn_harvested() helper now uses acquire semantics
so it is ordered after all previous writes, including that from
userspace
- the kvm_dirty_gfn_set_invalid() helper now uses release semantics
so that the next_slot and next_offset reads don't drift past
the entry invalidation
This is only a partial fix as the userspace side also need upgrading.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20220926145120.27974-2-maz@kernel.org
|
|
KVM_REQ_UNHALT is now unnecessary because it is replaced by the return
value of kvm_vcpu_block/kvm_vcpu_halt. Remove it.
No functional change intended.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20220921003201.1441511-13-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When alloc_cpumask_var_node() fails for a certain cpu, there might be some
allocated cpumasks for percpu cpu_kick_mask. We should free these cpumasks
or memoryleak will occur.
Fixes: baff59ccdc65 ("KVM: Pre-allocate cpumasks for kvm_make_all_cpus_request_except()")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Link: https://lore.kernel.org/r/20220823063414.59778-1-linmiaohe@huawei.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The variable is initialized but it is only used after its assignment.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Message-Id: <20220819021535.483702-1-kunyu@nfschina.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The variable is initialized but it is only used after its assignment.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Message-Id: <20220819022804.483914-1-kunyu@nfschina.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The motivation of this renaming is to make these variables and related
helper functions less mmu_notifier bound and can also be used for non
mmu_notifier based page invalidation. mmu_invalidate_* was chosen to
better describe the purpose of 'invalidating' a page that those
variables are used for.
- mmu_notifier_seq/range_start/range_end are renamed to
mmu_invalidate_seq/range_start/range_end.
- mmu_notifier_retry{_hva} helper functions are renamed to
mmu_invalidate_retry{_hva}.
- mmu_notifier_count is renamed to mmu_invalidate_in_progress to
avoid confusion with mn_active_invalidate_count.
- While here, also update kvm_inc/dec_notifier_count() to
kvm_mmu_invalidate_begin/end() to match the change for
mmu_notifier_count.
No functional change intended.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Message-Id: <20220816125322.1110439-3-chao.p.peng@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Invoke kvm_coalesced_mmio_init() from kvm_create_vm() now that allocating
and initializing coalesced MMIO objects is separate from registering any
associated devices. Moving coalesced MMIO cleans up the last oddity
where KVM does VM creation/initialization after kvm_create_vm(), and more
importantly after kvm_arch_post_init_vm() is called and the VM is added
to the global vm_list, i.e. after the VM is fully created as far as KVM
is concerned.
Originally, kvm_coalesced_mmio_init() was called by kvm_create_vm(), but
the original implementation was completely devoid of error handling.
Commit 6ce5a090a9a0 ("KVM: coalesced_mmio: fix kvm_coalesced_mmio_init()'s
error handling" fixed the various bugs, and in doing so rightly moved the
call to after kvm_create_vm() because kvm_coalesced_mmio_init() also
registered the coalesced MMIO device. Commit 2b3c246a682c ("KVM: Make
coalesced mmio use a device per zone") cleaned up that mess by having
each zone register a separate device, i.e. moved device registration to
its logical home in kvm_vm_ioctl_register_coalesced_mmio(). As a result,
kvm_coalesced_mmio_init() is now a "pure" initialization helper and can
be safely called from kvm_create_vm().
Opportunstically drop the #ifdef, KVM provides stubs for
kvm_coalesced_mmio_{init,free}() when CONFIG_KVM_MMIO=n (s390).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220816053937.2477106-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Unconditionally get a reference to the /dev/kvm module when creating a VM
instead of using try_get_module(), which will fail if the module is in
the process of being forcefully unloaded. The error handling when
try_get_module() fails doesn't properly unwind all that has been done,
e.g. doesn't call kvm_arch_pre_destroy_vm() and doesn't remove the VM
from the global list. Not removing VMs from the global list tends to be
fatal, e.g. leads to use-after-free explosions.
The obvious alternative would be to add proper unwinding, but the
justification for using try_get_module(), "rmmod --wait", is completely
bogus as support for "rmmod --wait", i.e. delete_module() without
O_NONBLOCK, was removed by commit 3f2b9c9cdf38 ("module: remove rmmod
--wait option.") nearly a decade ago.
It's still possible for try_get_module() to fail due to the module dying
(more like being killed), as the module will be tagged MODULE_STATE_GOING
by "rmmod --force", i.e. delete_module(..., O_TRUNC), but playing nice
with forced unloading is an exercise in futility and gives a falsea sense
of security. Using try_get_module() only prevents acquiring _new_
references, it doesn't magically put the references held by other VMs,
and forced unloading doesn't wait, i.e. "rmmod --force" on KVM is all but
guaranteed to cause spectacular fireworks; the window where KVM will fail
try_get_module() is tiny compared to the window where KVM is building and
running the VM with an elevated module refcount.
Addressing KVM's inability to play nice with "rmmod --force" is firmly
out-of-scope. Forcefully unloading any module taints kernel (for obvious
reasons) _and_ requires the kernel to be built with
CONFIG_MODULE_FORCE_UNLOAD=y, which is off by default and comes with the
amusing disclaimer that it's "mainly for kernel developers and desperate
users". In other words, KVM is free to scoff at bug reports due to using
"rmmod --force" while VMs may be running.
Fixes: 5f6de5cbebee ("KVM: Prevent module exit until all VMs are freed")
Cc: stable@vger.kernel.org
Cc: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220816053937.2477106-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Properly unwind VM creation if kvm_create_vm_debugfs() fails. A recent
change to invoke kvm_create_vm_debug() in kvm_create_vm() was led astray
by buggy try_get_module() handling adding by commit 5f6de5cbebee ("KVM:
Prevent module exit until all VMs are freed"). The debugfs error path
effectively inherits the bad error path of try_module_get(), e.g. KVM
leaves the to-be-free VM on vm_list even though KVM appears to do the
right thing by calling module_put() and falling through.
Opportunistically hoist kvm_create_vm_debugfs() above the call to
kvm_arch_post_init_vm() so that the "post-init" arch hook is actually
invoked after the VM is initialized (ignoring kvm_coalesced_mmio_init()
for the moment). x86 is the only non-nop implementation of the post-init
hook, and it doesn't allocate/initialize any objects that are reachable
via debugfs code (spawns a kthread worker for the NX huge page mitigation).
Leave the buggy try_get_module() alone for now, it will be fixed in a
separate commit.
Fixes: b74ed7a68ec1 ("KVM: Actually create debugfs in kvm_create_vm()")
Reported-by: syzbot+744e173caec2e1627ee0@syzkaller.appspotmail.com
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20220816053937.2477106-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Doing debugfs creation after vm creation leaves things in a
quasi-initialized state for a while. This is further complicated by the
fact that we tear down debugfs from kvm_destroy_vm(). Align debugfs and
stats init/destroy with the vm init/destroy pattern to avoid any
headaches.
Note the fix for a benign mistake in error handling for calls to
kvm_arch_create_vm_debugfs() rolled in. Since all implementations of
the function return 0 unconditionally it isn't actually a bug at
the moment.
Lastly, tear down debugfs/stats data in the kvm_create_vm_debugfs()
error path. Previously it was safe to assume that kvm_destroy_vm() would
take out the garbage, that is no longer the case.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220720092259.3491733-6-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
At the time the VM fd is used in kvm_create_vm_debugfs(), the fd has
been allocated but not yet installed. It is only really useful as an
identifier in strings for the VM (such as debugfs).
Treat it exactly as such by passing the string name of the fd to
kvm_create_vm_debugfs(), futureproofing against possible misuse of the
VM fd.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220720092259.3491733-5-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Allocate a VM's fd at the very beginning of kvm_dev_ioctl_create_vm() so
that KVM can use the fd value to generate strigns, e.g. for debugfs,
when creating and initializing the VM.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220720092259.3491733-4-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Initialize stats_id alongside other kvm_vcpu fields to make it more
difficult to unintentionally access stats_id before it's set.
No functional change intended.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220720092259.3491733-3-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Initialize stats_id alongside other struct kvm fields to make it more
difficult to unintentionally access stats_id before it's set. While at
it, move the format string to the first line of the call and fix the
indentation of the second line.
No functional change intended.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220720092259.3491733-2-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM/s390, KVM/x86 and common infrastructure changes for 5.20
x86:
* Permit guests to ignore single-bit ECC errors
* Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit (detect microarchitectural hangs) for Intel
* Cleanups for MCE MSR emulation
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to use TAP interface
* enable interpretive execution of zPCI instructions (for PCI passthrough)
* First part of deferred teardown
* CPU Topology
* PV attestation
* Minor fixes
Generic:
* new selftests API using struct kvm_vcpu instead of a (vm, id) tuple
x86:
* Use try_cmpxchg64 instead of cmpxchg64
* Bugfixes
* Ignore benign host accesses to PMU MSRs when PMU is disabled
* Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
* x86/MMU: Allow NX huge pages to be disabled on a per-vm basis
* Port eager page splitting to shadow MMU as well
* Enable CMCI capability by default and handle injected UCNA errors
* Expose pid of vcpu threads in debugfs
* x2AVIC support for AMD
* cleanup PIO emulation
* Fixes for LLDT/LTR emulation
* Don't require refcounted "struct page" to create huge SPTEs
x86 cleanups:
* Use separate namespaces for guest PTEs and shadow PTEs bitmasks
* PIO emulation
* Reorganize rmap API, mostly around rmap destruction
* Do not workaround very old KVM bugs for L0 that runs with nesting enabled
* new selftests API for CPUID
|
|
The kvm_mmu_topup_memory_cache() always uses GFP_KERNEL_ACCOUNT for
memory allocation which prevents it's use in atomic context. To address
this limitation of kvm_mmu_topup_memory_cache(), we add gfp_custom flag
in struct kvm_mmu_memory_cache. When the gfp_custom flag is set to some
GFP_xyz flags, the kvm_mmu_topup_memory_cache() will use that instead of
GFP_KERNEL_ACCOUNT.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Add a new debugfs file to expose the pid of each vcpu threads. This
is very helpful for userland tools to get the vcpu pids without
worrying about thread naming conventions of the VMM.
Signed-off-by: Vineeth Pillai (Google) <vineeth@bitbyteword.org>
Message-Id: <20220523190327.2658-1-vineeth@bitbyteword.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Allow the capacity of the kvm_mmu_memory_cache struct to be chosen at
declaration time rather than being fixed for all declarations. This will
be used in a follow-up commit to declare an cache in x86 with a capacity
of 512+ objects without having to increase the capacity of all caches in
KVM.
This change requires each cache now specify its capacity at runtime,
since the cache struct itself no longer has a fixed capacity known at
compile time. To protect against someone accidentally defining a
kvm_mmu_memory_cache struct directly (without the extra storage), this
commit includes a WARN_ON() in kvm_mmu_topup_memory_cache().
In order to support different capacities, this commit changes the
objects pointer array to be dynamically allocated the first time the
cache is topped-up.
While here, opportunistically clean up the stack-allocated
kvm_mmu_memory_cache structs in riscv and arm64 to use designated
initializers.
No functional change intended.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220516232138.1783324-22-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Drop the unnecessary initialization of the local 'pfn' variable in
hva_to_pfn(). First and foremost, '0' is not an invalid pfn, it's a
perfectly valid pfn on most architectures. I.e. if hva_to_pfn() were to
return an "uninitializd" pfn, it would actually be interpeted as a legal
pfn by most callers.
Second, hva_to_pfn() can't return an uninitialized pfn as hva_to_pfn()
explicitly sets pfn to an error value (or returns an error value directly)
if a helper returns failure, and all helpers set the pfn on success.
The zeroing of 'pfn' was introduced by commit 2fc843117d64 ("KVM:
reorganize hva_to_pfn"), probably to avoid "uninitialized variable"
warnings on statements that return pfn. However, no compiler seems
to produce them, making the initialization unnecessary.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rename and refactor kvm_is_reserved_pfn() to kvm_pfn_to_refcounted_page()
to better reflect what KVM is actually checking, and to eliminate extra
pfn_to_page() lookups. The kvm_release_pfn_*() an kvm_try_get_pfn()
helpers in particular benefit from "refouncted" nomenclature, as it's not
all that obvious why KVM needs to get/put refcounts for some PG_reserved
pages (ZERO_PAGE and ZONE_DEVICE).
Add a comment to call out that the list of exceptions to PG_reserved is
all but guaranteed to be incomplete. The list has mostly been compiled
by people throwing noodles at KVM and finding out they stick a little too
well, e.g. the ZERO_PAGE's refcount overflowed and ZONE_DEVICE pages
didn't get freed.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Operate on a 'struct page' instead of a pfn when checking if a page is a
ZONE_DEVICE page, and rename the helper accordingly. Generally speaking,
KVM doesn't actually care about ZONE_DEVICE memory, i.e. shouldn't do
anything special for ZONE_DEVICE memory. Rather, KVM wants to treat
ZONE_DEVICE memory like regular memory, and the need to identify
ZONE_DEVICE memory only arises as an exception to PG_reserved pages. In
other words, KVM should only ever check for ZONE_DEVICE memory after KVM
has already verified that there is a struct page associated with the pfn.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Drop helpers to convert a gfn/gpa to a 'struct page' in the context of a
vCPU. KVM doesn't require that guests be backed by 'struct page' memory,
thus any use of helpers that assume 'struct page' is bound to be flawed,
as was the case for the recently removed last user in x86's nested VMX.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Drop a WARN_ON() if kvm_pfn_to_page() encounters a "reserved" pfn, which
in this context means a struct page that has PG_reserved but is not a/the
ZERO_PAGE and is not a ZONE_DEVICE page. The usage, via gfn_to_page(),
in x86 is safe as gfn_to_page() is used only to retrieve a page from
KVM-controlled memslot, but the usage in PPC and s390 operates on
arbitrary gfns and thus memslots that can be backed by incompatible
memory.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Invert the order of KVM's page/pfn release helpers so that the "inner"
helper operates on a page instead of a pfn. As pointed out by Linus[*],
converting between struct page and a pfn isn't necessarily cheap, and
that's not even counting the overhead of is_error_noslot_pfn() and
kvm_is_reserved_pfn(). Even if the checks were dirt cheap, there's no
reason to convert from a page to a pfn and back to a page, just to mark
the page dirty/accessed or to put a reference to the page.
Opportunistically drop a stale declaration of kvm_set_page_accessed()
from kvm_host.h (there was no implementation).
No functional change intended.
[*] https://lore.kernel.org/all/CAHk-=wifQimj2d6npq-wCi5onYPjzQg4vyO4tFcPJJZr268cRw@mail.gmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Don't set Accessed/Dirty bits for a struct page with PG_reserved set,
i.e. don't set A/D bits for the ZERO_PAGE. The ZERO_PAGE (or pages
depending on the architecture) should obviously never be written, and
similarly there's no point in marking it accessed as the page will never
be swapped out or reclaimed. The comment in page-flags.h is quite clear
that PG_reserved pages should be managed only by their owner, and
strictly following that mandate also simplifies KVM's logic.
Fixes: 7df003c85218 ("KVM: fix overflow of zero page refcount with ksm running")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove a check from kvm_release_pfn() to bail if the provided @pfn is
zero. Zero is a perfectly valid pfn on most architectures, and should
not be used to indicate an error or an invalid pfn. The bogus check was
added by commit 917248144db5 ("x86/kvm: Cache gfn to pfn translation"),
which also did the bad thing of zeroing the pfn and gfn to mark a cache
invalid. Thankfully, that bad behavior was axed by commit 357a18ad230f
("KVM: Kill kvm_map_gfn() / kvm_unmap_gfn() and gfn_to_pfn_cache").
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Make it use the same verb as in kvm_kick_many_cpus().
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Message-Id: <20220605063417.308311-5-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to show tests
x86:
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Rewrite gfn-pfn cache refresh
* Refuse starting the module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit
|
|
On SVM, if preemption happens right after the call to finish_rcuwait
but before call to kvm_arch_vcpu_unblocking on SVM/AVIC, it itself
will re-enable AVIC, and then we will try to re-enable it again
in kvm_arch_vcpu_unblocking which will lead to a warning
in __avic_vcpu_load.
The same problem can happen if the vCPU is preempted right after the call
to kvm_arch_vcpu_blocking but before the call to prepare_to_rcuwait
and in this case, we will end up with AVIC enabled during sleep -
Ooops.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220606180829.102503-7-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM/riscv fixes for 5.19, take #1
- Typo fix in arch/riscv/kvm/vmid.c
- Remove broken reference pattern from MAINTAINERS entry
|
|
kvm_arch_vcpu_precreate() targets to handle arch specific VM resource
to be prepared prior to the actual creation of vCPU. For example, x86
platform may need do per-VM allocation based on max_vcpu_ids at the
first vCPU creation. It probably leads to concurrency control on this
allocation as multiple vCPU creation could happen simultaneously. From
the architectual point of view, it's necessary to execute
kvm_arch_vcpu_precreate() under protect of kvm->lock.
Currently only arm64, x86 and s390 have non-nop implementations at the
stage of vCPU pre-creation. Remove the lock acquiring in s390's design
and make sure all architecture can run kvm_arch_vcpu_precreate() safely
under kvm->lock without recrusive lock issue.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Zeng Guang <guang.zeng@intel.com>
Message-Id: <20220419154409.11842-1-guang.zeng@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
|
|
|
|
A KVM device cleanup happens in either of two callbacks:
1) destroy() which is called when the VM is being destroyed;
2) release() which is called when a device fd is closed.
Most KVM devices use 1) but Book3s's interrupt controller KVM devices
(XICS, XIVE, XIVE-native) use 2) as they need to close and reopen during
the machine execution. The error handling in kvm_ioctl_create_device()
assumes destroy() is always defined which leads to NULL dereference as
discovered by Syzkaller.
This adds a checks for destroy!=NULL and adds a missing release().
This is not changing kvm_destroy_devices() as devices with defined
release() should have been removed from the KVM devices list by then.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull vfio updates from Alex Williamson:
- Improvements to mlx5 vfio-pci variant driver, including support for
parallel migration per PF (Yishai Hadas)
- Remove redundant iommu_present() check (Robin Murphy)
- Ongoing refactoring to consolidate the VFIO driver facing API to use
vfio_device (Jason Gunthorpe)
- Use drvdata to store vfio_device among all vfio-pci and variant
drivers (Jason Gunthorpe)
- Remove redundant code now that IOMMU core manages group DMA ownership
(Jason Gunthorpe)
- Remove vfio_group from external API handling struct file ownership
(Jason Gunthorpe)
- Correct typo in uapi comments (Thomas Huth)
- Fix coccicheck detected deadlock (Wan Jiabing)
- Use rwsem to remove races and simplify code around container and kvm
association to groups (Jason Gunthorpe)
- Harden access to devices in low power states and use runtime PM to
enable d3cold support for unused devices (Abhishek Sahu)
- Fix dma_owner handling of fake IOMMU groups (Jason Gunthorpe)
- Set driver_managed_dma on vfio-pci variant drivers (Jason Gunthorpe)
- Pass KVM pointer directly rather than via notifier (Matthew Rosato)
* tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio: (38 commits)
vfio: remove VFIO_GROUP_NOTIFY_SET_KVM
vfio/pci: Add driver_managed_dma to the new vfio_pci drivers
vfio: Do not manipulate iommu dma_owner for fake iommu groups
vfio/pci: Move the unused device into low power state with runtime PM
vfio/pci: Virtualize PME related registers bits and initialize to zero
vfio/pci: Change the PF power state to D0 before enabling VFs
vfio/pci: Invalidate mmaps and block the access in D3hot power state
vfio: Change struct vfio_group::container_users to a non-atomic int
vfio: Simplify the life cycle of the group FD
vfio: Fully lock struct vfio_group::container
vfio: Split up vfio_group_get_device_fd()
vfio: Change struct vfio_group::opened from an atomic to bool
vfio: Add missing locking for struct vfio_group::kvm
kvm/vfio: Fix potential deadlock problem in vfio
include/uapi/linux/vfio.h: Fix trivial typo - _IORW should be _IOWR instead
vfio/pci: Use the struct file as the handle not the vfio_group
kvm/vfio: Remove vfio_group from kvm
vfio: Change vfio_group_set_kvm() to vfio_file_set_kvm()
vfio: Change vfio_external_check_extension() to vfio_file_enforced_coherent()
vfio: Remove vfio_external_group_match_file()
...
|
|
Pull kvm updates from Paolo Bonzini:
"S390:
- ultravisor communication device driver
- fix TEID on terminating storage key ops
RISC-V:
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed to
the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
x86:
- New ioctls to get/set TSC frequency for a whole VM
- Allow userspace to opt out of hypercall patching
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
- Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
- V_TSC_AUX support
Nested virtualization improvements for AMD:
- Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
- Allow AVIC to co-exist with a nested guest running
- Fixes for LBR virtualizations when a nested guest is running, and
nested LBR virtualization support
- PAUSE filtering for nested hypervisors
Guest support:
- Decoupling of vcpu_is_preempted from PV spinlocks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
KVM: selftests: x86: Sync the new name of the test case to .gitignore
Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
x86, kvm: use correct GFP flags for preemption disabled
KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
x86/kvm: Alloc dummy async #PF token outside of raw spinlock
KVM: x86: avoid calling x86 emulator without a decoded instruction
KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
s390/uv_uapi: depend on CONFIG_S390
KVM: selftests: x86: Fix test failure on arch lbr capable platforms
KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
KVM: s390: selftest: Test suppression indication on key prot exception
KVM: s390: Don't indicate suppression on dirtying, failing memop
selftests: drivers/s390x: Add uvdevice tests
drivers/s390/char: Add Ultravisor io device
MAINTAINERS: Update KVM RISC-V entry to cover selftests support
RISC-V: KVM: Introduce ISA extension register
RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
...
|
|
Put the reference to any struct page mapped/tracked by a gfn=>pfn cache
upon inserting the pfn into its associated cache, as opposed to putting
the reference only when the cache is done using the pfn. In other words,
don't pin pages while they're in the cache. One of the major roles of
the gfn=>pfn cache is to play nicely with invalidation events, i.e. it
exists in large part so that KVM doesn't rely on pinning pages.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429210025.3293691-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rework the gfn=>pfn cache (gpc) refresh logic to address multiple races
between the cache itself, and between the cache and mmu_notifier events.
The existing refresh code attempts to guard against races with the
mmu_notifier by speculatively marking the cache valid, and then marking
it invalid if a mmu_notifier invalidation occurs. That handles the case
where an invalidation occurs between dropping and re-acquiring gpc->lock,
but it doesn't handle the scenario where the cache is refreshed after the
cache was invalidated by the notifier, but before the notifier elevates
mmu_notifier_count. The gpc refresh can't use the "retry" helper as its
invalidation occurs _before_ mmu_notifier_count is elevated and before
mmu_notifier_range_start is set/updated.
CPU0 CPU1
---- ----
gfn_to_pfn_cache_invalidate_start()
|
-> gpc->valid = false;
kvm_gfn_to_pfn_cache_refresh()
|
|-> gpc->valid = true;
hva_to_pfn_retry()
|
-> acquire kvm->mmu_lock
kvm->mmu_notifier_count == 0
mmu_seq == kvm->mmu_notifier_seq
drop kvm->mmu_lock
return pfn 'X'
acquire kvm->mmu_lock
kvm_inc_notifier_count()
drop kvm->mmu_lock()
kernel frees pfn 'X'
kvm_gfn_to_pfn_cache_check()
|
|-> gpc->valid == true
caller accesses freed pfn 'X'
Key off of mn_active_invalidate_count to detect that a pfncache refresh
needs to wait for an in-progress mmu_notifier invalidation. While
mn_active_invalidate_count is not guaranteed to be stable, it is
guaranteed to be elevated prior to an invalidation acquiring gpc->lock,
so either the refresh will see an active invalidation and wait, or the
invalidation will run after the refresh completes.
Speculatively marking the cache valid is itself flawed, as a concurrent
kvm_gfn_to_pfn_cache_check() would see a valid cache with stale pfn/khva
values. The KVM Xen use case explicitly allows/wants multiple users;
even though the caches are allocated per vCPU, __kvm_xen_has_interrupt()
can read a different vCPU (or vCPUs). Address this race by invalidating
the cache prior to dropping gpc->lock (this is made possible by fixing
the above mmu_notifier race).
Complicating all of this is the fact that both the hva=>pfn resolution
and mapping of the kernel address can sleep, i.e. must be done outside
of gpc->lock.
Fix the above races in one fell swoop, trying to fix each individual race
is largely pointless and essentially impossible to test, e.g. closing one
hole just shifts the focus to the other hole.
Fixes: 982ed0de4753 ("KVM: Reinstate gfn_to_pfn_cache with invalidation support")
Cc: stable@vger.kernel.org
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429210025.3293691-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Protect gfn=>pfn cache refresh with a mutex to fully serialize refreshes.
The refresh logic doesn't protect against
- concurrent unmaps, or refreshes with different GPAs (which may or may not
happen in practice, for example if a cache is only used under vcpu->mutex;
but it's allowed in the code)
- a false negative on the memslot generation. If the first refresh sees
a stale memslot generation, it will refresh the hva and generation before
moving on to the hva=>pfn translation. If it then drops gpc->lock, a
different user of the cache can come along, acquire gpc->lock, see that
the memslot generation is fresh, and skip the hva=>pfn update due to the
userspace address also matching (because it too was updated).
The refresh path can already sleep during hva=>pfn resolution, so wrap
the refresh with a mutex to ensure that any given refresh runs to
completion before other callers can start their refresh.
Cc: stable@vger.kernel.org
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429210025.3293691-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
Paolo Bonzini
Gavin Shan
Sean Christopherson
Michal Luczaj
Hou Wenlong
Alexander Graf
Linus Torvalds
Jason Gunthorpe
Marc Zyngier
Miaohe Lin
Li kunyu
Chao Peng
Oliver Upton
Anup Patel
Vineeth Pillai
David Matlack
Lai Jiangshan
Maxim Levitsky
Zeng Guang
Alexey Kardashevskiy