1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
|
ARM Versatile Express boards family
-----------------------------------
ARM's Versatile Express platform consists of a motherboard and one
or more daughterboards (tiles). The motherboard provides a set of
peripherals. Processor and RAM "live" on the tiles.
The motherboard and each core tile should be described by a separate
Device Tree source file, with the tile's description including
the motherboard file using a /include/ directive. As the motherboard
can be initialized in one of two different configurations ("memory
maps"), care must be taken to include the correct one.
Root node
---------
Required properties in the root node:
- compatible value:
compatible = "arm,vexpress,<model>", "arm,vexpress";
where <model> is the full tile model name (as used in the tile's
Technical Reference Manual), eg.:
- for Coretile Express A5x2 (V2P-CA5s):
compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
- for Coretile Express A9x4 (V2P-CA9):
compatible = "arm,vexpress,v2p-ca9", "arm,vexpress";
If a tile comes in several variants or can be used in more then one
configuration, the compatible value should be:
compatible = "arm,vexpress,<model>,<variant>", \
"arm,vexpress,<model>", "arm,vexpress";
eg:
- Coretile Express A15x2 (V2P-CA15) with Tech Chip 1:
compatible = "arm,vexpress,v2p-ca15,tc1", \
"arm,vexpress,v2p-ca15", "arm,vexpress";
- LogicTile Express 13MG (V2F-2XV6) running Cortex-A7 (3 cores) SMM:
compatible = "arm,vexpress,v2f-2xv6,ca7x3", \
"arm,vexpress,v2f-2xv6", "arm,vexpress";
Optional properties in the root node:
- tile model name (use name from the tile's Technical Reference
Manual, eg. "V2P-CA5s")
model = "<model>";
- tile's HBI number (unique ARM's board model ID, visible on the
PCB's silkscreen) in hexadecimal transcription:
arm,hbi = <0xhbi>
eg:
- for Coretile Express A5x2 (V2P-CA5s) HBI-0191:
arm,hbi = <0x191>;
- Coretile Express A9x4 (V2P-CA9) HBI-0225:
arm,hbi = <0x225>;
CPU nodes
---------
Top-level standard "cpus" node is required. It must contain a node
with device_type = "cpu" property for every available core, eg.:
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a5";
reg = <0>;
};
};
Configuration infrastructure
----------------------------
The platform has an elaborated configuration system, consisting of
microcontrollers residing on the mother- and daughterboards known
as Motherboard/Daughterboard Configuration Controller (MCC and DCC).
The controllers are responsible for the platform initialization
(reset generation, flash programming, FPGA bitfiles loading etc.)
but also control clock generators, voltage regulators, gather
environmental data like temperature, power consumption etc. Even
the video output switch (FPGA) is controlled that way.
The controllers are not mapped into normal memory address space
and must be accessed through bridges - other devices capable
of generating transactions on the configuration bus.
The nodes describing configuration controllers must define
the following properties:
- compatible value:
compatible = "arm,vexpress,config-bus";
- bridge phandle:
arm,vexpress,config-bridge = <phandle>;
and children describing available functions.
Platform topology
-----------------
As Versatile Express can be configured in number of physically
different setups, the device tree should describe platform topology.
Root node and main motherboard node must define the following
property, describing physical location of the children nodes:
- site number:
arm,vexpress,site = <number>;
where 0 means motherboard, 1 or 2 are daugtherboard sites,
0xf means "master" site (site containing main CPU tile)
- when daughterboards are stacked on one site, their position
in the stack be be described with:
arm,vexpress,position = <number>;
- when describing tiles consisting more than one DCC, its number
can be described with:
arm,vexpress,dcc = <number>;
Any of the numbers above defaults to zero if not defined in
the node or any of its parent.
Motherboard
-----------
The motherboard description file provides a single "motherboard" node
using 2 address cells corresponding to the Static Memory Bus used
between the motherboard and the tile. The first cell defines the Chip
Select (CS) line number, the second cell address offset within the CS.
All interrupt lines between the motherboard and the tile are active
high and are described using single cell.
Optional properties of the "motherboard" node:
- motherboard's memory map variant:
arm,v2m-memory-map = "<name>";
where name is one of:
- "rs1" - for RS1 map (i.a. peripherals on CS3); this map is also
referred to as "ARM Cortex-A Series memory map":
arm,v2m-memory-map = "rs1";
When this property is missing, the motherboard is using the original
memory map (also known as the "Legacy memory map", primarily used
with the original CoreTile Express A9x4) with peripherals on CS7.
Motherboard .dtsi files provide a set of labelled peripherals that
can be used to obtain required phandle in the tile's "aliases" node:
- UARTs, note that the numbers correspond to the physical connectors
on the motherboard's back panel:
v2m_serial0, v2m_serial1, v2m_serial2 and v2m_serial3
- I2C controllers:
v2m_i2c_dvi and v2m_i2c_pcie
- SP804 timers:
v2m_timer01 and v2m_timer23
The tile description should define a "smb" node, describing the
Static Memory Bus between the tile and motherboard. It must define
the following properties:
- "simple-bus" compatible value (to ensure creation of the children)
compatible = "simple-bus";
- mapping of the SMB CS/offset addresses into main address space:
#address-cells = <2>;
#size-cells = <1>;
ranges = <...>;
- interrupts mapping:
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 63>;
interrupt-map = <...>;
Example of a VE tile description (simplified)
---------------------------------------------
/dts-v1/;
/ {
model = "V2P-CA5s";
arm,hbi = <0x225>;
arm,vexpress,site = <0xf>;
compatible = "arm,vexpress-v2p-ca5s", "arm,vexpress";
interrupt-parent = <&gic>;
#address-cells = <1>;
#size-cells = <1>;
chosen { };
aliases {
serial0 = &v2m_serial0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a5";
reg = <0>;
};
};
gic: interrupt-controller@2c001000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0x2c001000 0x1000>,
<0x2c000100 0x100>;
};
dcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
osc@0 {
compatible = "arm,vexpress-osc";
};
};
smb {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
/* CS0 is visible at 0x08000000 */
ranges = <0 0 0x08000000 0x04000000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 63>;
/* Active high IRQ 0 is connected to GIC's SPI0 */
interrupt-map = <0 0 0 &gic 0 0 4>;
/include/ "vexpress-v2m-rs1.dtsi"
};
};
|