aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/thermal/exynos_thermal
blob: 9010c441696743ec87bec451a71c2b1403c0fa37 (plain) (blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
Kernel driver exynos_tmu
=================

Supported chips:
* ARM SAMSUNG EXYNOS4, EXYNOS5 series of SoC
  Datasheet: Not publicly available

Authors: Donggeun Kim <dg77.kim@samsung.com>
Authors: Amit Daniel <amit.daniel@samsung.com>

TMU controller Description:
---------------------------

This driver allows to read temperature inside SAMSUNG EXYNOS4/5 series of SoC.

The chip only exposes the measured 8-bit temperature code value
through a register.
Temperature can be taken from the temperature code.
There are three equations converting from temperature to temperature code.

The three equations are:
  1. Two point trimming
	Tc = (T - 25) * (TI2 - TI1) / (85 - 25) + TI1

  2. One point trimming
	Tc = T + TI1 - 25

  3. No trimming
	Tc = T + 50

  Tc: Temperature code, T: Temperature,
  TI1: Trimming info for 25 degree Celsius (stored at TRIMINFO register)
       Temperature code measured at 25 degree Celsius which is unchanged
  TI2: Trimming info for 85 degree Celsius (stored at TRIMINFO register)
       Temperature code measured at 85 degree Celsius which is unchanged

TMU(Thermal Management Unit) in EXYNOS4/5 generates interrupt
when temperature exceeds pre-defined levels.
The maximum number of configurable threshold is five.
The threshold levels are defined as follows:
  Level_0: current temperature > trigger_level_0 + threshold
  Level_1: current temperature > trigger_level_1 + threshold
  Level_2: current temperature > trigger_level_2 + threshold
  Level_3: current temperature > trigger_level_3 + threshold

  The threshold and each trigger_level are set
  through the corresponding registers.

When an interrupt occurs, this driver notify kernel thermal framework
with the function exynos_report_trigger.
Although an interrupt condition for level_0 can be set,
it can be used to synchronize the cooling action.

TMU driver description:
-----------------------

The exynos thermal driver is structured as,

					Kernel Core thermal framework
				(thermal_core.c, step_wise.c, cpu_cooling.c)
								^
								|
								|
TMU configuration data -------> TMU Driver  <------> Exynos Core thermal wrapper
(exynos_tmu_data.c)	      (exynos_tmu.c)	   (exynos_thermal_common.c)
(exynos_tmu_data.h)	      (exynos_tmu.h)	   (exynos_thermal_common.h)

a) TMU configuration data: This consist of TMU register offsets/bitfields
		described through structure exynos_tmu_registers. Also several
		other platform data (struct exynos_tmu_platform_data) members
		are used to configure the TMU.
b) TMU driver: This component initialises the TMU controller and sets different
		thresholds. It invokes core thermal implementation with the call
		exynos_report_trigger.
c) Exynos Core thermal wrapper: This provides 3 wrapper function to use the
		Kernel core thermal framework. They are exynos_unregister_thermal,
		exynos_register_thermal and exynos_report_trigger.