aboutsummaryrefslogtreecommitdiffstats
path: root/arch/powerpc/include/asm/fsl_guts.h
blob: ce04530d20003a42e045a634790691c99d715d53 (plain) (blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
/**
 * Freecale 85xx and 86xx Global Utilties register set
 *
 * Authors: Jeff Brown
 *          Timur Tabi <timur@freescale.com>
 *
 * Copyright 2004,2007,2012 Freescale Semiconductor, Inc
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

#ifndef __ASM_POWERPC_FSL_GUTS_H__
#define __ASM_POWERPC_FSL_GUTS_H__
#ifdef __KERNEL__

/*
 * These #ifdefs are safe because it's not possible to build a kernel that
 * runs on e500 and e600 cores.
 */

#if !defined(CONFIG_PPC_85xx) && !defined(CONFIG_PPC_86xx)
#error Only 85xx and 86xx SOCs are supported
#endif

/**
 * Global Utility Registers.
 *
 * Not all registers defined in this structure are available on all chips, so
 * you are expected to know whether a given register actually exists on your
 * chip before you access it.
 *
 * Also, some registers are similar on different chips but have slightly
 * different names.  In these cases, one name is chosen to avoid extraneous
 * #ifdefs.
 */
#ifdef CONFIG_PPC_85xx
struct ccsr_guts_85xx {
#else
struct ccsr_guts_86xx {
#endif
	__be32	porpllsr;	/* 0x.0000 - POR PLL Ratio Status Register */
	__be32	porbmsr;	/* 0x.0004 - POR Boot Mode Status Register */
	__be32	porimpscr;	/* 0x.0008 - POR I/O Impedance Status and Control Register */
	__be32	pordevsr;	/* 0x.000c - POR I/O Device Status Register */
	__be32	pordbgmsr;	/* 0x.0010 - POR Debug Mode Status Register */
	__be32	pordevsr2;	/* 0x.0014 - POR device status register 2 */
	u8	res018[0x20 - 0x18];
	__be32	porcir;		/* 0x.0020 - POR Configuration Information Register */
	u8	res024[0x30 - 0x24];
	__be32	gpiocr;		/* 0x.0030 - GPIO Control Register */
	u8	res034[0x40 - 0x34];
	__be32	gpoutdr;	/* 0x.0040 - General-Purpose Output Data Register */
	u8	res044[0x50 - 0x44];
	__be32	gpindr;		/* 0x.0050 - General-Purpose Input Data Register */
	u8	res054[0x60 - 0x54];
	__be32	pmuxcr;		/* 0x.0060 - Alternate Function Signal Multiplex Control */
        __be32  pmuxcr2;	/* 0x.0064 - Alternate function signal multiplex control 2 */
        __be32  dmuxcr;		/* 0x.0068 - DMA Mux Control Register */
        u8	res06c[0x70 - 0x6c];
	__be32	devdisr;	/* 0x.0070 - Device Disable Control */
	__be32	devdisr2;	/* 0x.0074 - Device Disable Control 2 */
	u8	res078[0x7c - 0x78];
	__be32  pmjcr;		/* 0x.007c - 4 Power Management Jog Control Register */
	__be32	powmgtcsr;	/* 0x.0080 - Power Management Status and Control Register */
	__be32  pmrccr;		/* 0x.0084 - Power Management Reset Counter Configuration Register */
	__be32  pmpdccr;	/* 0x.0088 - Power Management Power Down Counter Configuration Register */
	__be32  pmcdr;		/* 0x.008c - 4Power management clock disable register */
	__be32	mcpsumr;	/* 0x.0090 - Machine Check Summary Register */
	__be32	rstrscr;	/* 0x.0094 - Reset Request Status and Control Register */
	__be32  ectrstcr;	/* 0x.0098 - Exception reset control register */
	__be32  autorstsr;	/* 0x.009c - Automatic reset status register */
	__be32	pvr;		/* 0x.00a0 - Processor Version Register */
	__be32	svr;		/* 0x.00a4 - System Version Register */
	u8	res0a8[0xb0 - 0xa8];
	__be32	rstcr;		/* 0x.00b0 - Reset Control Register */
	u8	res0b4[0xc0 - 0xb4];
#ifdef CONFIG_PPC_85xx
	__be32  iovselsr;	/* 0x.00c0 - I/O voltage select status register */
#else
	__be32	elbcvselcr;	/* 0x.00c0 - eLBC Voltage Select Ctrl Reg */
#endif
	u8	res0c4[0x224 - 0xc4];
	__be32  iodelay1;	/* 0x.0224 - IO delay control register 1 */
	__be32  iodelay2;	/* 0x.0228 - IO delay control register 2 */
	u8	res22c[0x800 - 0x22c];
	__be32	clkdvdr;	/* 0x.0800 - Clock Divide Register */
	u8	res804[0x900 - 0x804];
	__be32	ircr;		/* 0x.0900 - Infrared Control Register */
	u8	res904[0x908 - 0x904];
	__be32	dmacr;		/* 0x.0908 - DMA Control Register */
	u8	res90c[0x914 - 0x90c];
	__be32	elbccr;		/* 0x.0914 - eLBC Control Register */
	u8	res918[0xb20 - 0x918];
	__be32	ddr1clkdr;	/* 0x.0b20 - DDR1 Clock Disable Register */
	__be32	ddr2clkdr;	/* 0x.0b24 - DDR2 Clock Disable Register */
	__be32	ddrclkdr;	/* 0x.0b28 - DDR Clock Disable Register */
	u8	resb2c[0xe00 - 0xb2c];
	__be32	clkocr;		/* 0x.0e00 - Clock Out Select Register */
	u8	rese04[0xe10 - 0xe04];
	__be32	ddrdllcr;	/* 0x.0e10 - DDR DLL Control Register */
	u8	rese14[0xe20 - 0xe14];
	__be32	lbcdllcr;	/* 0x.0e20 - LBC DLL Control Register */
	__be32  cpfor;		/* 0x.0e24 - L2 charge pump fuse override register */
	u8	rese28[0xf04 - 0xe28];
	__be32	srds1cr0;	/* 0x.0f04 - SerDes1 Control Register 0 */
	__be32	srds1cr1;	/* 0x.0f08 - SerDes1 Control Register 0 */
	u8	resf0c[0xf2c - 0xf0c];
	__be32  itcr;		/* 0x.0f2c - Internal transaction control register */
	u8	resf30[0xf40 - 0xf30];
	__be32	srds2cr0;	/* 0x.0f40 - SerDes2 Control Register 0 */
	__be32	srds2cr1;	/* 0x.0f44 - SerDes2 Control Register 0 */
} __attribute__ ((packed));


/* Alternate function signal multiplex control */
#define MPC85xx_PMUXCR_QE(x) (0x8000 >> (x))

#ifdef CONFIG_PPC_86xx

#define CCSR_GUTS_DMACR_DEV_SSI	0	/* DMA controller/channel set to SSI */
#define CCSR_GUTS_DMACR_DEV_IR	1	/* DMA controller/channel set to IR */

/*
 * Set the DMACR register in the GUTS
 *
 * The DMACR register determines the source of initiated transfers for each
 * channel on each DMA controller.  Rather than have a bunch of repetitive
 * macros for the bit patterns, we just have a function that calculates
 * them.
 *
 * guts: Pointer to GUTS structure
 * co: The DMA controller (0 or 1)
 * ch: The channel on the DMA controller (0, 1, 2, or 3)
 * device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx)
 */
static inline void guts_set_dmacr(struct ccsr_guts_86xx __iomem *guts,
	unsigned int co, unsigned int ch, unsigned int device)
{
	unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch));

	clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift);
}

#define CCSR_GUTS_PMUXCR_LDPSEL		0x00010000
#define CCSR_GUTS_PMUXCR_SSI1_MASK	0x0000C000	/* Bitmask for SSI1 */
#define CCSR_GUTS_PMUXCR_SSI1_LA	0x00000000	/* Latched address */
#define CCSR_GUTS_PMUXCR_SSI1_HI	0x00004000	/* High impedance */
#define CCSR_GUTS_PMUXCR_SSI1_SSI	0x00008000	/* Used for SSI1 */
#define CCSR_GUTS_PMUXCR_SSI2_MASK	0x00003000	/* Bitmask for SSI2 */
#define CCSR_GUTS_PMUXCR_SSI2_LA	0x00000000	/* Latched address */
#define CCSR_GUTS_PMUXCR_SSI2_HI	0x00001000	/* High impedance */
#define CCSR_GUTS_PMUXCR_SSI2_SSI	0x00002000	/* Used for SSI2 */
#define CCSR_GUTS_PMUXCR_LA_22_25_LA	0x00000000	/* Latched Address */
#define CCSR_GUTS_PMUXCR_LA_22_25_HI	0x00000400	/* High impedance */
#define CCSR_GUTS_PMUXCR_DBGDRV		0x00000200	/* Signals not driven */
#define CCSR_GUTS_PMUXCR_DMA2_0		0x00000008
#define CCSR_GUTS_PMUXCR_DMA2_3		0x00000004
#define CCSR_GUTS_PMUXCR_DMA1_0		0x00000002
#define CCSR_GUTS_PMUXCR_DMA1_3		0x00000001

/*
 * Set the DMA external control bits in the GUTS
 *
 * The DMA external control bits in the PMUXCR are only meaningful for
 * channels 0 and 3.  Any other channels are ignored.
 *
 * guts: Pointer to GUTS structure
 * co: The DMA controller (0 or 1)
 * ch: The channel on the DMA controller (0, 1, 2, or 3)
 * value: the new value for the bit (0 or 1)
 */
static inline void guts_set_pmuxcr_dma(struct ccsr_guts_86xx __iomem *guts,
	unsigned int co, unsigned int ch, unsigned int value)
{
	if ((ch == 0) || (ch == 3)) {
		unsigned int shift = 2 * (co + 1) - (ch & 1) - 1;

		clrsetbits_be32(&guts->pmuxcr, 1 << shift, value << shift);
	}
}

#define CCSR_GUTS_CLKDVDR_PXCKEN	0x80000000
#define CCSR_GUTS_CLKDVDR_SSICKEN	0x20000000
#define CCSR_GUTS_CLKDVDR_PXCKINV	0x10000000
#define CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT 25
#define CCSR_GUTS_CLKDVDR_PXCKDLY_MASK	0x06000000
#define CCSR_GUTS_CLKDVDR_PXCKDLY(x) \
	(((x) & 3) << CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT)
#define CCSR_GUTS_CLKDVDR_PXCLK_SHIFT	16
#define CCSR_GUTS_CLKDVDR_PXCLK_MASK	0x001F0000
#define CCSR_GUTS_CLKDVDR_PXCLK(x) (((x) & 31) << CCSR_GUTS_CLKDVDR_PXCLK_SHIFT)
#define CCSR_GUTS_CLKDVDR_SSICLK_MASK	0x000000FF
#define CCSR_GUTS_CLKDVDR_SSICLK(x) ((x) & CCSR_GUTS_CLKDVDR_SSICLK_MASK)

#endif

#endif
#endif