1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
|
// SPDX-License-Identifier: GPL-2.0+
/*
* comedi_8255.c
* Generic 8255 digital I/O support
*
* Split from the Comedi "8255" driver module.
*
* COMEDI - Linux Control and Measurement Device Interface
* Copyright (C) 1998 David A. Schleef <ds@schleef.org>
*/
/*
* Module: comedi_8255
* Description: Generic 8255 support
* Author: ds
* Updated: Fri, 22 May 2015 12:14:17 +0000
* Status: works
*
* This module is not used directly by end-users. Rather, it is used by
* other drivers to provide support for an 8255 "Programmable Peripheral
* Interface" (PPI) chip.
*
* The classic in digital I/O. The 8255 appears in Comedi as a single
* digital I/O subdevice with 24 channels. The channel 0 corresponds to
* the 8255's port A, bit 0; channel 23 corresponds to port C, bit 7.
* Direction configuration is done in blocks, with channels 0-7, 8-15,
* 16-19, and 20-23 making up the 4 blocks. The only 8255 mode
* supported is mode 0.
*/
#include <linux/module.h>
#include "../comedidev.h"
#include "8255.h"
struct subdev_8255_private {
unsigned long regbase;
int (*io)(struct comedi_device *dev, int dir, int port, int data,
unsigned long regbase);
};
static int subdev_8255_io(struct comedi_device *dev,
int dir, int port, int data, unsigned long regbase)
{
if (dir) {
outb(data, dev->iobase + regbase + port);
return 0;
}
return inb(dev->iobase + regbase + port);
}
static int subdev_8255_mmio(struct comedi_device *dev,
int dir, int port, int data, unsigned long regbase)
{
if (dir) {
writeb(data, dev->mmio + regbase + port);
return 0;
}
return readb(dev->mmio + regbase + port);
}
static int subdev_8255_insn(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
struct subdev_8255_private *spriv = s->private;
unsigned long regbase = spriv->regbase;
unsigned int mask;
unsigned int v;
mask = comedi_dio_update_state(s, data);
if (mask) {
if (mask & 0xff)
spriv->io(dev, 1, I8255_DATA_A_REG,
s->state & 0xff, regbase);
if (mask & 0xff00)
spriv->io(dev, 1, I8255_DATA_B_REG,
(s->state >> 8) & 0xff, regbase);
if (mask & 0xff0000)
spriv->io(dev, 1, I8255_DATA_C_REG,
(s->state >> 16) & 0xff, regbase);
}
v = spriv->io(dev, 0, I8255_DATA_A_REG, 0, regbase);
v |= (spriv->io(dev, 0, I8255_DATA_B_REG, 0, regbase) << 8);
v |= (spriv->io(dev, 0, I8255_DATA_C_REG, 0, regbase) << 16);
data[1] = v;
return insn->n;
}
static void subdev_8255_do_config(struct comedi_device *dev,
struct comedi_subdevice *s)
{
struct subdev_8255_private *spriv = s->private;
unsigned long regbase = spriv->regbase;
int config;
config = I8255_CTRL_CW;
/* 1 in io_bits indicates output, 1 in config indicates input */
if (!(s->io_bits & 0x0000ff))
config |= I8255_CTRL_A_IO;
if (!(s->io_bits & 0x00ff00))
config |= I8255_CTRL_B_IO;
if (!(s->io_bits & 0x0f0000))
config |= I8255_CTRL_C_LO_IO;
if (!(s->io_bits & 0xf00000))
config |= I8255_CTRL_C_HI_IO;
spriv->io(dev, 1, I8255_CTRL_REG, config, regbase);
}
static int subdev_8255_insn_config(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned int chan = CR_CHAN(insn->chanspec);
unsigned int mask;
int ret;
if (chan < 8)
mask = 0x0000ff;
else if (chan < 16)
mask = 0x00ff00;
else if (chan < 20)
mask = 0x0f0000;
else
mask = 0xf00000;
ret = comedi_dio_insn_config(dev, s, insn, data, mask);
if (ret)
return ret;
subdev_8255_do_config(dev, s);
return insn->n;
}
static int __subdev_8255_init(struct comedi_device *dev,
struct comedi_subdevice *s,
int (*io)(struct comedi_device *dev,
int dir, int port, int data,
unsigned long regbase),
unsigned long regbase,
bool is_mmio)
{
struct subdev_8255_private *spriv;
spriv = comedi_alloc_spriv(s, sizeof(*spriv));
if (!spriv)
return -ENOMEM;
if (io)
spriv->io = io;
else if (is_mmio)
spriv->io = subdev_8255_mmio;
else
spriv->io = subdev_8255_io;
spriv->regbase = regbase;
s->type = COMEDI_SUBD_DIO;
s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
s->n_chan = 24;
s->range_table = &range_digital;
s->maxdata = 1;
s->insn_bits = subdev_8255_insn;
s->insn_config = subdev_8255_insn_config;
subdev_8255_do_config(dev, s);
return 0;
}
/**
* subdev_8255_init - initialize DIO subdevice for driving I/O mapped 8255
* @dev: comedi device owning subdevice
* @s: comedi subdevice to initialize
* @io: (optional) register I/O call-back function
* @regbase: offset of 8255 registers from dev->iobase, or call-back context
*
* Initializes a comedi subdevice as a DIO subdevice driving an 8255 chip.
*
* If the optional I/O call-back function is provided, its prototype is of
* the following form:
*
* int my_8255_callback(struct comedi_device *dev, int dir, int port,
* int data, unsigned long regbase);
*
* where 'dev', and 'regbase' match the values passed to this function,
* 'port' is the 8255 port number 0 to 3 (including the control port), 'dir'
* is the direction (0 for read, 1 for write) and 'data' is the value to be
* written. It should return 0 if writing or the value read if reading.
*
* If the optional I/O call-back function is not provided, an internal
* call-back function is used which uses consecutive I/O port addresses
* starting at dev->iobase + regbase.
*
* Return: -ENOMEM if failed to allocate memory, zero on success.
*/
int subdev_8255_init(struct comedi_device *dev, struct comedi_subdevice *s,
int (*io)(struct comedi_device *dev, int dir, int port,
int data, unsigned long regbase),
unsigned long regbase)
{
return __subdev_8255_init(dev, s, io, regbase, false);
}
EXPORT_SYMBOL_GPL(subdev_8255_init);
/**
* subdev_8255_mm_init - initialize DIO subdevice for driving mmio-mapped 8255
* @dev: comedi device owning subdevice
* @s: comedi subdevice to initialize
* @io: (optional) register I/O call-back function
* @regbase: offset of 8255 registers from dev->mmio, or call-back context
*
* Initializes a comedi subdevice as a DIO subdevice driving an 8255 chip.
*
* If the optional I/O call-back function is provided, its prototype is of
* the following form:
*
* int my_8255_callback(struct comedi_device *dev, int dir, int port,
* int data, unsigned long regbase);
*
* where 'dev', and 'regbase' match the values passed to this function,
* 'port' is the 8255 port number 0 to 3 (including the control port), 'dir'
* is the direction (0 for read, 1 for write) and 'data' is the value to be
* written. It should return 0 if writing or the value read if reading.
*
* If the optional I/O call-back function is not provided, an internal
* call-back function is used which uses consecutive MMIO virtual addresses
* starting at dev->mmio + regbase.
*
* Return: -ENOMEM if failed to allocate memory, zero on success.
*/
int subdev_8255_mm_init(struct comedi_device *dev, struct comedi_subdevice *s,
int (*io)(struct comedi_device *dev, int dir, int port,
int data, unsigned long regbase),
unsigned long regbase)
{
return __subdev_8255_init(dev, s, io, regbase, true);
}
EXPORT_SYMBOL_GPL(subdev_8255_mm_init);
/**
* subdev_8255_regbase - get offset of 8255 registers or call-back context
* @s: comedi subdevice
*
* Returns the 'regbase' parameter that was previously passed to
* subdev_8255_init() or subdev_8255_mm_init() to set up the subdevice.
* Only valid if the subdevice was set up successfully.
*/
unsigned long subdev_8255_regbase(struct comedi_subdevice *s)
{
struct subdev_8255_private *spriv = s->private;
return spriv->regbase;
}
EXPORT_SYMBOL_GPL(subdev_8255_regbase);
static int __init comedi_8255_module_init(void)
{
return 0;
}
module_init(comedi_8255_module_init);
static void __exit comedi_8255_module_exit(void)
{
}
module_exit(comedi_8255_module_exit);
MODULE_AUTHOR("Comedi https://www.comedi.org");
MODULE_DESCRIPTION("Comedi: Generic 8255 digital I/O support");
MODULE_LICENSE("GPL");
|
