1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
|
/*
* Copyright 2022 Advanced Micro Devices, Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
*/
#ifndef __SMU_V13_0_4_PPSMC_H__
#define __SMU_V13_0_4_PPSMC_H__
/*! @mainpage PMFW-PPS (PPLib) Message Interface
This documentation contains the subsections:\n\n
@ref ResponseCodes\n
@ref definitions\n
@ref enums\n
*/
/** @def PPS_PMFW_IF_VER
* PPS (PPLib) to PMFW IF version 1.0
*/
#define PPS_PMFW_IF_VER "1.0" ///< Major.Minor
/** @defgroup ResponseCodes PMFW Response Codes
* @{
*/
// SMU Response Codes:
#define PPSMC_Result_OK 0x1 ///< Message Response OK
#define PPSMC_Result_Failed 0xFF ///< Message Response Failed
#define PPSMC_Result_UnknownCmd 0xFE ///< Message Response Unknown Command
#define PPSMC_Result_CmdRejectedPrereq 0xFD ///< Message Response Command Failed Prerequisite
#define PPSMC_Result_CmdRejectedBusy 0xFC ///< Message Response Command Rejected due to PMFW is busy. Sender should retry sending this message
/** @}*/
/** @defgroup definitions Message definitions
* @{
*/
// Message Definitions:
#define PPSMC_MSG_TestMessage 0x01 ///< To check if PMFW is alive and responding. Requirement specified by PMFW team
#define PPSMC_MSG_GetPmfwVersion 0x02 ///< Get PMFW version
#define PPSMC_MSG_GetDriverIfVersion 0x03 ///< Get PMFW_DRIVER_IF version
#define PPSMC_MSG_SPARE0 0x04 ///< SPARE
#define PPSMC_MSG_SPARE1 0x05 ///< SPARE
#define PPSMC_MSG_PowerDownVcn 0x06 ///< Power down VCN
#define PPSMC_MSG_PowerUpVcn 0x07 ///< Power up VCN; VCN is power gated by default
#define PPSMC_MSG_SetHardMinVcn 0x08 ///< For wireless display
#define PPSMC_MSG_SetSoftMinGfxclk 0x09 ///< Set SoftMin for GFXCLK, argument is frequency in MHz
#define PPSMC_MSG_SPARE2 0x0A ///< SPARE
#define PPSMC_MSG_SPARE3 0x0B ///< SPARE
#define PPSMC_MSG_PrepareMp1ForUnload 0x0C ///< Prepare PMFW for GFX driver unload
#define PPSMC_MSG_SetDriverDramAddrHigh 0x0D ///< Set high 32 bits of DRAM address for Driver table transfer
#define PPSMC_MSG_SetDriverDramAddrLow 0x0E ///< Set low 32 bits of DRAM address for Driver table transfer
#define PPSMC_MSG_TransferTableSmu2Dram 0x0F ///< Transfer driver interface table from PMFW SRAM to DRAM
#define PPSMC_MSG_TransferTableDram2Smu 0x10 ///< Transfer driver interface table from DRAM to PMFW SRAM
#define PPSMC_MSG_GfxDeviceDriverReset 0x11 ///< Request GFX mode 2 reset
#define PPSMC_MSG_GetEnabledSmuFeatures 0x12 ///< Get enabled features in PMFW
#define PPSMC_MSG_SetHardMinSocclkByFreq 0x13 ///< Set hard min for SOC CLK
#define PPSMC_MSG_SetSoftMinFclk 0x14 ///< Set hard min for FCLK
#define PPSMC_MSG_SetSoftMinVcn 0x15 ///< Set soft min for VCN clocks (VCLK and DCLK)
#define PPSMC_MSG_EnableGfxImu 0x16 ///< Enable GFX IMU
#define PPSMC_MSG_GetGfxclkFrequency 0x17 ///< Get GFX clock frequency
#define PPSMC_MSG_GetFclkFrequency 0x18 ///< Get FCLK frequency
#define PPSMC_MSG_AllowGfxOff 0x19 ///< Inform PMFW of allowing GFXOFF entry
#define PPSMC_MSG_DisallowGfxOff 0x1A ///< Inform PMFW of disallowing GFXOFF entry
#define PPSMC_MSG_SetSoftMaxGfxClk 0x1B ///< Set soft max for GFX CLK
#define PPSMC_MSG_SetHardMinGfxClk 0x1C ///< Set hard min for GFX CLK
#define PPSMC_MSG_SetSoftMaxSocclkByFreq 0x1D ///< Set soft max for SOC CLK
#define PPSMC_MSG_SetSoftMaxFclkByFreq 0x1E ///< Set soft max for FCLK
#define PPSMC_MSG_SetSoftMaxVcn 0x1F ///< Set soft max for VCN clocks (VCLK and DCLK)
#define PPSMC_MSG_SetPowerLimitPercentage 0x20 ///< Set power limit percentage
#define PPSMC_MSG_PowerDownJpeg 0x21 ///< Power down Jpeg
#define PPSMC_MSG_PowerUpJpeg 0x22 ///< Power up Jpeg; VCN is power gated by default
#define PPSMC_MSG_SetHardMinFclkByFreq 0x23 ///< Set hard min for FCLK
#define PPSMC_MSG_SetSoftMinSocclkByFreq 0x24 ///< Set soft min for SOC CLK
#define PPSMC_MSG_AllowZstates 0x25 ///< Inform PMFM of allowing Zstate entry, i.e. no Miracast activity
#define PPSMC_MSG_Reserved 0x26 ///< Not used
#define PPSMC_MSG_Reserved1 0x27 ///< Not used, previously PPSMC_MSG_RequestActiveWgp
#define PPSMC_MSG_Reserved2 0x28 ///< Not used, previously PPSMC_MSG_QueryActiveWgp
#define PPSMC_MSG_PowerDownIspByTile 0x29 ///< ISP is power gated by default
#define PPSMC_MSG_PowerUpIspByTile 0x2A ///< This message is used to power up ISP tiles and enable the ISP DPM
#define PPSMC_MSG_SetHardMinIspiclkByFreq 0x2B ///< Set HardMin by frequency for ISPICLK
#define PPSMC_MSG_SetHardMinIspxclkByFreq 0x2C ///< Set HardMin by frequency for ISPXCLK
#define PPSMC_MSG_PowerDownUmsch 0x2D ///< Power down VCN.UMSCH (aka VSCH) scheduler
#define PPSMC_MSG_PowerUpUmsch 0x2E ///< Power up VCN.UMSCH (aka VSCH) scheduler
#define PPSMC_MSG_IspStutterOn_MmhubPgDis 0x2F ///< ISP StutterOn mmHub PgDis
#define PPSMC_MSG_IspStutterOff_MmhubPgEn 0x30 ///< ISP StufferOff mmHub PgEn
#define PPSMC_Message_Count 0x31 ///< Total number of PPSMC messages
/** @}*/
/**
* @defgroup enums Enum Definitions
* @{
*/
/** @enum Mode_Reset_e
* Mode reset type, argument for PPSMC_MSG_GfxDeviceDriverReset
*/
//argument for PPSMC_MSG_GfxDeviceDriverReset
typedef enum {
MODE1_RESET = 1, ///< Mode reset type 1
MODE2_RESET = 2 ///< Mode reset type 2
} Mode_Reset_e;
/** @}*/
/** @enum ZStates_e
* Zstate types, argument for PPSMC_MSG_AllowZstates
*/
//Argument for PPSMC_MSG_AllowZstates
typedef enum {
DISALLOW_ZSTATES = 0, ///< Disallow Zstates
ALLOW_ZSTATES_Z8 = 8, ///< Allows Z8 only
ALLOW_ZSTATES_Z9 = 9, ///< Allows Z9 and Z8
} ZStates_e;
/** @}*/
#endif
|
