aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/dw_mmc-exynos.c
blob: 660bbc528862fc67915b79def806cf689d4ac755 (plain) (blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
/*
 * Exynos Specific Extensions for Synopsys DW Multimedia Card Interface driver
 *
 * Copyright (C) 2012, Samsung Electronics Co., Ltd.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 */

#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/mmc/host.h>
#include <linux/mmc/dw_mmc.h>
#include <linux/of.h>
#include <linux/of_gpio.h>

#include "dw_mmc.h"
#include "dw_mmc-pltfm.h"

#define NUM_PINS(x)			(x + 2)

#define SDMMC_CLKSEL			0x09C
#define SDMMC_CLKSEL_CCLK_SAMPLE(x)	(((x) & 7) << 0)
#define SDMMC_CLKSEL_CCLK_DRIVE(x)	(((x) & 7) << 16)
#define SDMMC_CLKSEL_CCLK_DIVIDER(x)	(((x) & 7) << 24)
#define SDMMC_CLKSEL_GET_DRV_WD3(x)	(((x) >> 16) & 0x7)
#define SDMMC_CLKSEL_TIMING(x, y, z)	(SDMMC_CLKSEL_CCLK_SAMPLE(x) |	\
					SDMMC_CLKSEL_CCLK_DRIVE(y) |	\
					SDMMC_CLKSEL_CCLK_DIVIDER(z))

#define SDMMC_CMD_USE_HOLD_REG		BIT(29)

#define EXYNOS4210_FIXED_CIU_CLK_DIV	2
#define EXYNOS4412_FIXED_CIU_CLK_DIV	4

/* Variations in Exynos specific dw-mshc controller */
enum dw_mci_exynos_type {
	DW_MCI_TYPE_EXYNOS4210,
	DW_MCI_TYPE_EXYNOS4412,
	DW_MCI_TYPE_EXYNOS5250,
};

/* Exynos implementation specific driver private data */
struct dw_mci_exynos_priv_data {
	enum dw_mci_exynos_type		ctrl_type;
	u8				ciu_div;
	u32				sdr_timing;
	u32				ddr_timing;
};

static struct dw_mci_exynos_compatible {
	char				*compatible;
	enum dw_mci_exynos_type		ctrl_type;
} exynos_compat[] = {
	{
		.compatible	= "samsung,exynos4210-dw-mshc",
		.ctrl_type	= DW_MCI_TYPE_EXYNOS4210,
	}, {
		.compatible	= "samsung,exynos4412-dw-mshc",
		.ctrl_type	= DW_MCI_TYPE_EXYNOS4412,
	}, {
		.compatible	= "samsung,exynos5250-dw-mshc",
		.ctrl_type	= DW_MCI_TYPE_EXYNOS5250,
	},
};

static int dw_mci_exynos_priv_init(struct dw_mci *host)
{
	struct dw_mci_exynos_priv_data *priv;
	int idx;

	priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL);
	if (!priv) {
		dev_err(host->dev, "mem alloc failed for private data\n");
		return -ENOMEM;
	}

	for (idx = 0; idx < ARRAY_SIZE(exynos_compat); idx++) {
		if (of_device_is_compatible(host->dev->of_node,
					exynos_compat[idx].compatible))
			priv->ctrl_type = exynos_compat[idx].ctrl_type;
	}

	host->priv = priv;
	return 0;
}

static int dw_mci_exynos_setup_clock(struct dw_mci *host)
{
	struct dw_mci_exynos_priv_data *priv = host->priv;

	if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS5250)
		host->bus_hz /= (priv->ciu_div + 1);
	else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4412)
		host->bus_hz /= EXYNOS4412_FIXED_CIU_CLK_DIV;
	else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4210)
		host->bus_hz /= EXYNOS4210_FIXED_CIU_CLK_DIV;

	return 0;
}

static void dw_mci_exynos_prepare_command(struct dw_mci *host, u32 *cmdr)
{
	/*
	 * Exynos4412 and Exynos5250 extends the use of CMD register with the
	 * use of bit 29 (which is reserved on standard MSHC controllers) for
	 * optionally bypassing the HOLD register for command and data. The
	 * HOLD register should be bypassed in case there is no phase shift
	 * applied on CMD/DATA that is sent to the card.
	 */
	if (SDMMC_CLKSEL_GET_DRV_WD3(mci_readl(host, CLKSEL)))
		*cmdr |= SDMMC_CMD_USE_HOLD_REG;
}

static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios)
{
	struct dw_mci_exynos_priv_data *priv = host->priv;

	if (ios->timing == MMC_TIMING_UHS_DDR50)
		mci_writel(host, CLKSEL, priv->ddr_timing);
	else
		mci_writel(host, CLKSEL, priv->sdr_timing);
}

static int dw_mci_exynos_parse_dt(struct dw_mci *host)
{
	struct dw_mci_exynos_priv_data *priv = host->priv;
	struct device_node *np = host->dev->of_node;
	u32 timing[2];
	u32 div = 0;
	int ret;

	of_property_read_u32(np, "samsung,dw-mshc-ciu-div", &div);
	priv->ciu_div = div;

	ret = of_property_read_u32_array(np,
			"samsung,dw-mshc-sdr-timing", timing, 2);
	if (ret)
		return ret;

	priv->sdr_timing = SDMMC_CLKSEL_TIMING(timing[0], timing[1], div);

	ret = of_property_read_u32_array(np,
			"samsung,dw-mshc-ddr-timing", timing, 2);
	if (ret)
		return ret;

	priv->ddr_timing = SDMMC_CLKSEL_TIMING(timing[0], timing[1], div);
	return 0;
}

static int dw_mci_exynos_setup_bus(struct dw_mci *host,
				struct device_node *slot_np, u8 bus_width)
{
	int idx, gpio, ret;

	if (!slot_np)
		return -EINVAL;

	/* cmd + clock + bus-width pins */
	for (idx = 0; idx < NUM_PINS(bus_width); idx++) {
		gpio = of_get_gpio(slot_np, idx);
		if (!gpio_is_valid(gpio)) {
			dev_err(host->dev, "invalid gpio: %d\n", gpio);
			return -EINVAL;
		}

		ret = devm_gpio_request(host->dev, gpio, "dw-mci-bus");
		if (ret) {
			dev_err(host->dev, "gpio [%d] request failed\n", gpio);
			return -EBUSY;
		}
	}

	gpio = of_get_named_gpio(slot_np, "wp-gpios", 0);
	if (gpio_is_valid(gpio)) {
		if (devm_gpio_request(host->dev, gpio, "dw-mci-wp"))
			dev_info(host->dev, "gpio [%d] request failed\n",
						gpio);
	} else {
		dev_info(host->dev, "wp gpio not available");
		host->pdata->quirks |= DW_MCI_QUIRK_NO_WRITE_PROTECT;
	}

	if (host->pdata->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
		return 0;

	gpio = of_get_named_gpio(slot_np, "samsung,cd-pinmux-gpio", 0);
	if (gpio_is_valid(gpio)) {
		if (devm_gpio_request(host->dev, gpio, "dw-mci-cd"))
			dev_err(host->dev, "gpio [%d] request failed\n", gpio);
	} else {
		dev_info(host->dev, "cd gpio not available");
	}

	return 0;
}

/* Exynos5250 controller specific capabilities */
static unsigned long exynos5250_dwmmc_caps[4] = {
	MMC_CAP_UHS_DDR50 | MMC_CAP_1_8V_DDR |
		MMC_CAP_8_BIT_DATA | MMC_CAP_CMD23,
	MMC_CAP_CMD23,
	MMC_CAP_CMD23,
	MMC_CAP_CMD23,
};

static struct dw_mci_drv_data exynos5250_drv_data = {
	.caps			= exynos5250_dwmmc_caps,
	.init			= dw_mci_exynos_priv_init,
	.setup_clock		= dw_mci_exynos_setup_clock,
	.prepare_command	= dw_mci_exynos_prepare_command,
	.set_ios		= dw_mci_exynos_set_ios,
	.parse_dt		= dw_mci_exynos_parse_dt,
	.setup_bus		= dw_mci_exynos_setup_bus,
};

static const struct of_device_id dw_mci_exynos_match[] = {
	{ .compatible = "samsung,exynos5250-dw-mshc",
			.data = (void *)&exynos5250_drv_data, },
	{},
};
MODULE_DEVICE_TABLE(of, dw_mci_pltfm_match);

int dw_mci_exynos_probe(struct platform_device *pdev)
{
	struct dw_mci_drv_data *drv_data;
	const struct of_device_id *match;

	match = of_match_node(dw_mci_exynos_match, pdev->dev.of_node);
	drv_data = match->data;
	return dw_mci_pltfm_register(pdev, drv_data);
}

static struct platform_driver dw_mci_exynos_pltfm_driver = {
	.probe		= dw_mci_exynos_probe,
	.remove		= __exit_p(dw_mci_pltfm_remove),
	.driver		= {
		.name		= "dwmmc_exynos",
		.of_match_table	= of_match_ptr(dw_mci_exynos_match),
		.pm		= &dw_mci_pltfm_pmops,
	},
};

module_platform_driver(dw_mci_exynos_pltfm_driver);

MODULE_DESCRIPTION("Samsung Specific DW-MSHC Driver Extension");
MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:dwmmc-exynos");