aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pcmcia/ti113x.h
blob: aaa70227bfb05ee4df811a00fc11df5670d8d50c (plain) (blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
/*
 * ti113x.h 1.16 1999/10/25 20:03:34
 *
 * The contents of this file are subject to the Mozilla Public License
 * Version 1.1 (the "License"); you may not use this file except in
 * compliance with the License. You may obtain a copy of the License
 * at http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS"
 * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
 * the License for the specific language governing rights and
 * limitations under the License. 
 *
 * The initial developer of the original code is David A. Hinds
 * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
 * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
 *
 * Alternatively, the contents of this file may be used under the
 * terms of the GNU General Public License version 2 (the "GPL"), in which
 * case the provisions of the GPL are applicable instead of the
 * above.  If you wish to allow the use of your version of this file
 * only under the terms of the GPL and not to allow others to use
 * your version of this file under the MPL, indicate your decision by
 * deleting the provisions above and replace them with the notice and
 * other provisions required by the GPL.  If you do not delete the
 * provisions above, a recipient may use your version of this file
 * under either the MPL or the GPL.
 */

#ifndef _LINUX_TI113X_H
#define _LINUX_TI113X_H


/* Register definitions for TI 113X PCI-to-CardBus bridges */

/* System Control Register */
#define TI113X_SYSTEM_CONTROL		0x0080	/* 32 bit */
#define  TI113X_SCR_SMIROUTE		0x04000000
#define  TI113X_SCR_SMISTATUS		0x02000000
#define  TI113X_SCR_SMIENB		0x01000000
#define  TI113X_SCR_VCCPROT		0x00200000
#define  TI113X_SCR_REDUCEZV		0x00100000
#define  TI113X_SCR_CDREQEN		0x00080000
#define  TI113X_SCR_CDMACHAN		0x00070000
#define  TI113X_SCR_SOCACTIVE		0x00002000
#define  TI113X_SCR_PWRSTREAM		0x00000800
#define  TI113X_SCR_DELAYUP		0x00000400
#define  TI113X_SCR_DELAYDOWN		0x00000200
#define  TI113X_SCR_INTERROGATE		0x00000100
#define  TI113X_SCR_CLKRUN_SEL		0x00000080
#define  TI113X_SCR_PWRSAVINGS		0x00000040
#define  TI113X_SCR_SUBSYSRW		0x00000020
#define  TI113X_SCR_CB_DPAR		0x00000010
#define  TI113X_SCR_CDMA_EN		0x00000008
#define  TI113X_SCR_ASYNC_IRQ		0x00000004
#define  TI113X_SCR_KEEPCLK		0x00000002
#define  TI113X_SCR_CLKRUN_ENA		0x00000001  

#define  TI122X_SCR_SER_STEP		0xc0000000
#define  TI122X_SCR_INTRTIE		0x20000000
#define  TIXX21_SCR_TIEALL		0x10000000
#define  TI122X_SCR_CBRSVD		0x00400000
#define  TI122X_SCR_MRBURSTDN		0x00008000
#define  TI122X_SCR_MRBURSTUP		0x00004000
#define  TI122X_SCR_RIMUX		0x00000001

/* Multimedia Control Register */
#define TI1250_MULTIMEDIA_CTL		0x0084	/* 8 bit */
#define  TI1250_MMC_ZVOUTEN		0x80
#define  TI1250_MMC_PORTSEL		0x40
#define  TI1250_MMC_ZVEN1		0x02
#define  TI1250_MMC_ZVEN0		0x01

#define TI1250_GENERAL_STATUS		0x0085	/* 8 bit */
#define TI1250_GPIO0_CONTROL		0x0088	/* 8 bit */
#define TI1250_GPIO1_CONTROL		0x0089	/* 8 bit */
#define TI1250_GPIO2_CONTROL		0x008a	/* 8 bit */
#define TI1250_GPIO3_CONTROL		0x008b	/* 8 bit */
#define TI1250_GPIO_MODE_MASK		0xc0

/* IRQMUX/MFUNC Register */
#define TI122X_MFUNC			0x008c	/* 32 bit */
#define TI122X_MFUNC0_MASK		0x0000000f
#define TI122X_MFUNC1_MASK		0x000000f0
#define TI122X_MFUNC2_MASK		0x00000f00
#define TI122X_MFUNC3_MASK		0x0000f000
#define TI122X_MFUNC4_MASK		0x000f0000
#define TI122X_MFUNC5_MASK		0x00f00000
#define TI122X_MFUNC6_MASK		0x0f000000

#define TI122X_MFUNC0_INTA		0x00000002
#define TI125X_MFUNC0_INTB		0x00000001
#define TI122X_MFUNC1_INTB		0x00000020
#define TI122X_MFUNC3_IRQSER		0x00001000


/* Retry Status Register */
#define TI113X_RETRY_STATUS		0x0090	/* 8 bit */
#define  TI113X_RSR_PCIRETRY		0x80
#define  TI113X_RSR_CBRETRY		0x40
#define  TI113X_RSR_TEXP_CBB		0x20
#define  TI113X_RSR_MEXP_CBB		0x10
#define  TI113X_RSR_TEXP_CBA		0x08
#define  TI113X_RSR_MEXP_CBA		0x04
#define  TI113X_RSR_TEXP_PCI		0x02
#define  TI113X_RSR_MEXP_PCI		0x01

/* Card Control Register */
#define TI113X_CARD_CONTROL		0x0091	/* 8 bit */
#define  TI113X_CCR_RIENB		0x80
#define  TI113X_CCR_ZVENABLE		0x40
#define  TI113X_CCR_PCI_IRQ_ENA		0x20
#define  TI113X_CCR_PCI_IREQ		0x10
#define  TI113X_CCR_PCI_CSC		0x08
#define  TI113X_CCR_SPKROUTEN		0x02
#define  TI113X_CCR_IFG			0x01

#define  TI1220_CCR_PORT_SEL		0x20
#define  TI122X_CCR_AUD2MUX		0x04

/* Device Control Register */
#define TI113X_DEVICE_CONTROL		0x0092	/* 8 bit */
#define  TI113X_DCR_5V_FORCE		0x40
#define  TI113X_DCR_3V_FORCE		0x20
#define  TI113X_DCR_IMODE_MASK		0x06
#define  TI113X_DCR_IMODE_ISA		0x02
#define  TI113X_DCR_IMODE_SERIAL	0x04

#define  TI12XX_DCR_IMODE_PCI_ONLY	0x00
#define  TI12XX_DCR_IMODE_ALL_SERIAL	0x06

/* Buffer Control Register */
#define TI113X_BUFFER_CONTROL		0x0093	/* 8 bit */
#define  TI113X_BCR_CB_READ_DEPTH	0x08
#define  TI113X_BCR_CB_WRITE_DEPTH	0x04
#define  TI113X_BCR_PCI_READ_DEPTH	0x02
#define  TI113X_BCR_PCI_WRITE_DEPTH	0x01

/* Diagnostic Register */
#define TI1250_DIAGNOSTIC		0x0093	/* 8 bit */
#define  TI1250_DIAG_TRUE_VALUE		0x80
#define  TI1250_DIAG_PCI_IREQ		0x40
#define  TI1250_DIAG_PCI_CSC		0x20
#define  TI1250_DIAG_ASYNC_CSC		0x01

/* DMA Registers */
#define TI113X_DMA_0			0x0094	/* 32 bit */
#define TI113X_DMA_1			0x0098	/* 32 bit */

/* ExCA IO offset registers */
#define TI113X_IO_OFFSET(map)		(0x36+((map)<<1))

/* EnE test register */
#define ENE_TEST_C9			0xc9	/* 8bit */
#define ENE_TEST_C9_TLTENABLE		0x02
#define ENE_TEST_C9_PFENABLE_F0		0x04
#define ENE_TEST_C9_PFENABLE_F1		0x08
#define ENE_TEST_C9_PFENABLE		(ENE_TEST_C9_PFENABLE_F0 | ENE_TEST_C9_PFENABLE_F1)
#define ENE_TEST_C9_WPDISALBLE_F0	0x40
#define ENE_TEST_C9_WPDISALBLE_F1	0x80
#define ENE_TEST_C9_WPDISALBLE		(ENE_TEST_C9_WPDISALBLE_F0 | ENE_TEST_C9_WPDISALBLE_F1)

/*
 * Texas Instruments CardBus controller overrides.
 */
#define ti_sysctl(socket)	((socket)->private[0])
#define ti_cardctl(socket)	((socket)->private[1])
#define ti_devctl(socket)	((socket)->private[2])
#define ti_diag(socket)		((socket)->private[3])
#define ti_mfunc(socket)	((socket)->private[4])
#define ene_test_c9(socket)	((socket)->private[5])

/*
 * These are the TI specific power management handlers.
 */
static void ti_save_state(struct yenta_socket *socket)
{
	ti_sysctl(socket) = config_readl(socket, TI113X_SYSTEM_CONTROL);
	ti_mfunc(socket) = config_readl(socket, TI122X_MFUNC);
	ti_cardctl(socket) = config_readb(socket, TI113X_CARD_CONTROL);
	ti_devctl(socket) = config_readb(socket, TI113X_DEVICE_CONTROL);
	ti_diag(socket) = config_readb(socket, TI1250_DIAGNOSTIC);

	if (socket->dev->vendor == PCI_VENDOR_ID_ENE)
		ene_test_c9(socket) = config_readb(socket, ENE_TEST_C9);
}

static void ti_restore_state(struct yenta_socket *socket)
{
	config_writel(socket, TI113X_SYSTEM_CONTROL, ti_sysctl(socket));
	config_writel(socket, TI122X_MFUNC, ti_mfunc(socket));
	config_writeb(socket, TI113X_CARD_CONTROL, ti_cardctl(socket));
	config_writeb(socket, TI113X_DEVICE_CONTROL, ti_devctl(socket));
	config_writeb(socket, TI1250_DIAGNOSTIC, ti_diag(socket));

	if (socket->dev->vendor == PCI_VENDOR_ID_ENE)
		config_writeb(socket, ENE_TEST_C9, ene_test_c9(socket));
}

/*
 *	Zoom video control for TI122x/113x chips
 */

static void ti_zoom_video(struct pcmcia_socket *sock, int onoff)
{
	u8 reg;
	struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);

	/* If we don't have a Zoom Video switch this is harmless,
	   we just tristate the unused (ZV) lines */
	reg = config_readb(socket, TI113X_CARD_CONTROL);
	if (onoff)
		/* Zoom zoom, we will all go together, zoom zoom, zoom zoom */
		reg |= TI113X_CCR_ZVENABLE;
	else
		reg &= ~TI113X_CCR_ZVENABLE;
	config_writeb(socket, TI113X_CARD_CONTROL, reg);
}

/*
 *	The 145x series can also use this. They have an additional
 *	ZV autodetect mode we don't use but don't actually need.
 *	FIXME: manual says its in func0 and func1 but disagrees with
 *	itself about this - do we need to force func0, if so we need
 *	to know a lot more about socket pairings in pcmcia_socket than
 *	we do now.. uggh.
 */
 
static void ti1250_zoom_video(struct pcmcia_socket *sock, int onoff)
{	
	struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
	int shift = 0;
	u8 reg;

	ti_zoom_video(sock, onoff);

	reg = config_readb(socket, TI1250_MULTIMEDIA_CTL);
	reg |= TI1250_MMC_ZVOUTEN;	/* ZV bus enable */

	if(PCI_FUNC(socket->dev->devfn)==1)
		shift = 1;
	
	if(onoff)
	{
		reg &= ~(1<<6); 	/* Clear select bit */
		reg |= shift<<6;	/* Favour our socket */
		reg |= 1<<shift;	/* Socket zoom video on */
	}
	else
	{
		reg &= ~(1<<6); 	/* Clear select bit */
		reg |= (1^shift)<<6;	/* Favour other socket */
		reg &= ~(1<<shift);	/* Socket zoon video off */
	}

	config_writeb(socket, TI1250_MULTIMEDIA_CTL, reg);
}

static void ti_set_zv(struct yenta_socket *socket)
{
	if(socket->dev->vendor == PCI_VENDOR_ID_TI)
	{
		switch(socket->dev->device)
		{
			/* There may be more .. */
			case PCI_DEVICE_ID_TI_1220:
			case PCI_DEVICE_ID_TI_1221:
			case PCI_DEVICE_ID_TI_1225:
			case PCI_DEVICE_ID_TI_4510:
				socket->socket.zoom_video = ti_zoom_video;
				break;	
			case PCI_DEVICE_ID_TI_1250:
			case PCI_DEVICE_ID_TI_1251A:
			case PCI_DEVICE_ID_TI_1251B:
			case PCI_DEVICE_ID_TI_1450:
				socket->socket.zoom_video = ti1250_zoom_video;
		}
	}
}


/*
 * Generic TI init - TI has an extension for the
 * INTCTL register that sets the PCI CSC interrupt.
 * Make sure we set it correctly at open and init
 * time
 * - override: disable the PCI CSC interrupt. This makes
 *   it possible to use the CSC interrupt to probe the
 *   ISA interrupts.
 * - init: set the interrupt to match our PCI state.
 *   This makes us correctly get PCI CSC interrupt
 *   events.
 */
static int ti_init(struct yenta_socket *socket)
{
	u8 new, reg = exca_readb(socket, I365_INTCTL);

	new = reg & ~I365_INTR_ENA;
	if (socket->cb_irq)
		new |= I365_INTR_ENA;
	if (new != reg)
		exca_writeb(socket, I365_INTCTL, new);
	return 0;
}

static int ti_override(struct yenta_socket *socket)
{
	u8 new, reg = exca_readb(socket, I365_INTCTL);

	new = reg & ~I365_INTR_ENA;
	if (new != reg)
		exca_writeb(socket, I365_INTCTL, new);

	ti_set_zv(socket);

	return 0;
}

static int ti113x_override(struct yenta_socket *socket)
{
	u8 cardctl;

	cardctl = config_readb(socket, TI113X_CARD_CONTROL);
	cardctl &= ~(TI113X_CCR_PCI_IRQ_ENA | TI113X_CCR_PCI_IREQ | TI113X_CCR_PCI_CSC);
	if (socket->cb_irq)
		cardctl |= TI113X_CCR_PCI_IRQ_ENA | TI113X_CCR_PCI_CSC | TI113X_CCR_PCI_IREQ;
	config_writeb(socket, TI113X_CARD_CONTROL, cardctl);

	return ti_override(socket);
}


/* irqrouting for func0, probes PCI interrupt and ISA interrupts */
static void ti12xx_irqroute_func0(struct yenta_socket *socket)
{
	u32 mfunc, mfunc_old, devctl;
	u8 gpio3, gpio3_old;
	int pci_irq_status;

	mfunc = mfunc_old = config_readl(socket, TI122X_MFUNC);
	devctl = config_readb(socket, TI113X_DEVICE_CONTROL);
	dev_printk(KERN_INFO, &socket->dev->dev,
		   "TI: mfunc 0x%08x, devctl 0x%02x\n", mfunc, devctl);

	/* make sure PCI interrupts are enabled before probing */
	ti_init(socket);

	/* test PCI interrupts first. only try fixing if return value is 0! */
	pci_irq_status = yenta_probe_cb_irq(socket);
	if (pci_irq_status)
		goto out;

	/*
	 * We're here which means PCI interrupts are _not_ delivered. try to
	 * find the right setting (all serial or parallel)
	 */
	dev_printk(KERN_INFO, &socket->dev->dev,
		   "TI: probing PCI interrupt failed, trying to fix\n");

	/* for serial PCI make sure MFUNC3 is set to IRQSER */
	if ((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) {
		switch (socket->dev->device) {
		case PCI_DEVICE_ID_TI_1250:
		case PCI_DEVICE_ID_TI_1251A:
		case PCI_DEVICE_ID_TI_1251B:
		case PCI_DEVICE_ID_TI_1450:
		case PCI_DEVICE_ID_TI_1451A:
		case PCI_DEVICE_ID_TI_4450:
		case PCI_DEVICE_ID_TI_4451:
			/* these chips have no IRQSER setting in MFUNC3  */
			break;

		default:
			mfunc = (mfunc & ~TI122X_MFUNC3_MASK) | TI122X_MFUNC3_IRQSER;

			/* write down if changed, probe */
			if (mfunc != mfunc_old) {
				config_writel(socket, TI122X_MFUNC, mfunc);

				pci_irq_status = yenta_probe_cb_irq(socket);
				if (pci_irq_status == 1) {
					dev_printk(KERN_INFO, &socket->dev->dev,
					    "TI: all-serial interrupts ok\n");
					mfunc_old = mfunc;
					goto out;
				}

				/* not working, back to old value */
				mfunc = mfunc_old;
				config_writel(socket, TI122X_MFUNC, mfunc);

				if (pci_irq_status == -1)
					goto out;
			}
		}

		/* serial PCI interrupts not working fall back to parallel */
		dev_printk(KERN_INFO, &socket->dev->dev,
			   "TI: falling back to parallel PCI interrupts\n");
		devctl &= ~TI113X_DCR_IMODE_MASK;
		devctl |= TI113X_DCR_IMODE_SERIAL; /* serial ISA could be right */
		config_writeb(socket, TI113X_DEVICE_CONTROL, devctl);
	}

	/* parallel PCI interrupts: route INTA */
	switch (socket->dev->device) {
	case PCI_DEVICE_ID_TI_1250:
	case PCI_DEVICE_ID_TI_1251A:
	case PCI_DEVICE_ID_TI_1251B:
	case PCI_DEVICE_ID_TI_1450:
		/* make sure GPIO3 is set to INTA */
		gpio3 = gpio3_old = config_readb(socket, TI1250_GPIO3_CONTROL);
		gpio3 &= ~TI1250_GPIO_MODE_MASK;
		if (gpio3 != gpio3_old)
			config_writeb(socket, TI1250_GPIO3_CONTROL, gpio3);
		break;

	default:
		gpio3 = gpio3_old = 0;

		mfunc = (mfunc & ~TI122X_MFUNC0_MASK) | TI122X_MFUNC0_INTA;
		if (mfunc != mfunc_old)
			config_writel(socket, TI122X_MFUNC, mfunc);
	}

	/* time to probe again */
	pci_irq_status = yenta_probe_cb_irq(socket);
	if (pci_irq_status == 1) {
		mfunc_old = mfunc;
		dev_printk(KERN_INFO, &socket->dev->dev,
			   "TI: parallel PCI interrupts ok\n");
	} else {
		/* not working, back to old value */
		mfunc = mfunc_old;
		config_writel(socket, TI122X_MFUNC, mfunc);
		if (gpio3 != gpio3_old)
			config_writeb(socket, TI1250_GPIO3_CONTROL, gpio3_old);
	}

out:
	if (pci_irq_status < 1) {
		socket->cb_irq = 0;
		dev_printk(KERN_INFO, &socket->dev->dev,
			   "Yenta TI: no PCI interrupts. Fish. "
			   "Please report.\n");
	}
}


/* changes the irq of func1 to match that of func0 */
static int ti12xx_align_irqs(struct yenta_socket *socket, int *old_irq)
{
	struct pci_dev *func0;

	/* find func0 device */
	func0 = pci_get_slot(socket->dev->bus, socket->dev->devfn & ~0x07);
	if (!func0)
		return 0;

	if (old_irq)
		*old_irq = socket->cb_irq;
	socket->cb_irq = socket->dev->irq = func0->irq;

	pci_dev_put(func0);

	return 1;
}

/*
 * ties INTA and INTB together. also changes the devices irq to that of
 * the function 0 device. call from func1 only.
 * returns 1 if INTRTIE changed, 0 otherwise.
 */
static int ti12xx_tie_interrupts(struct yenta_socket *socket, int *old_irq)
{
	u32 sysctl;
	int ret;

	sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
	if (sysctl & TI122X_SCR_INTRTIE)
		return 0;

	/* align */
	ret = ti12xx_align_irqs(socket, old_irq);
	if (!ret)
		return 0;

	/* tie */
	sysctl |= TI122X_SCR_INTRTIE;
	config_writel(socket, TI113X_SYSTEM_CONTROL, sysctl);

	return 1;
}

/* undo what ti12xx_tie_interrupts() did */
static void ti12xx_untie_interrupts(struct yenta_socket *socket, int old_irq)
{
	u32 sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
	sysctl &= ~TI122X_SCR_INTRTIE;
	config_writel(socket, TI113X_SYSTEM_CONTROL, sysctl);

	socket->cb_irq = socket->dev->irq = old_irq;
}

/* 
 * irqrouting for func1, plays with INTB routing
 * only touches MFUNC for INTB routing. all other bits are taken
 * care of in func0 already.
 */
static void ti12xx_irqroute_func1(struct yenta_socket *socket)
{
	u32 mfunc, mfunc_old, devctl, sysctl;
	int pci_irq_status;

	mfunc = mfunc_old = config_readl(socket, TI122X_MFUNC);
	devctl = config_readb(socket, TI113X_DEVICE_CONTROL);
	dev_printk(KERN_INFO, &socket->dev->dev,
		   "TI: mfunc 0x%08x, devctl 0x%02x\n",
		   mfunc, devctl);

	/* if IRQs are configured as tied, align irq of func1 with func0 */
	sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
	if (sysctl & TI122X_SCR_INTRTIE)
		ti12xx_align_irqs(socket, NULL);

	/* make sure PCI interrupts are enabled before probing */
	ti_init(socket);

	/* test PCI interrupts first. only try fixing if return value is 0! */
	pci_irq_status = yenta_probe_cb_irq(socket);
	if (pci_irq_status)
		goto out;

	/*
	 * We're here which means PCI interrupts are _not_ delivered. try to
	 * find the right setting
	 */
	dev_printk(KERN_INFO, &socket->dev->dev,
		   "TI: probing PCI interrupt failed, trying to fix\n");

	/* if all serial: set INTRTIE, probe again */
	if ((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) {
		int old_irq;

		if (ti12xx_tie_interrupts(socket, &old_irq)) {
			pci_irq_status = yenta_probe_cb_irq(socket);
			if (pci_irq_status == 1) {
				dev_printk(KERN_INFO, &socket->dev->dev,
					"TI: all-serial interrupts, tied ok\n");
				goto out;
			}

			ti12xx_untie_interrupts(socket, old_irq);
		}
	}
	/* parallel PCI: route INTB, probe again */
	else {
		int old_irq;

		switch (socket->dev->device) {
		case PCI_DEVICE_ID_TI_1250:
			/* the 1250 has one pin for IRQSER/INTB depending on devctl */
			break;

		case PCI_DEVICE_ID_TI_1251A:
		case PCI_DEVICE_ID_TI_1251B:
		case PCI_DEVICE_ID_TI_1450:
			/*
			 *  those have a pin for IRQSER/INTB plus INTB in MFUNC0
			 *  we alread probed the shared pin, now go for MFUNC0
			 */
			mfunc = (mfunc & ~TI122X_MFUNC0_MASK) | TI125X_MFUNC0_INTB;
			break;

		default:
			mfunc = (mfunc & ~TI122X_MFUNC1_MASK) | TI122X_MFUNC1_INTB;
			break;
		}

		/* write, probe */
		if (mfunc != mfunc_old) {
			config_writel(socket, TI122X_MFUNC, mfunc);

			pci_irq_status = yenta_probe_cb_irq(socket);
			if (pci_irq_status == 1) {
				dev_printk(KERN_INFO, &socket->dev->dev,
					   "TI: parallel PCI interrupts ok\n");
				goto out;
			}

			mfunc = mfunc_old;
			config_writel(socket, TI122X_MFUNC, mfunc);

			if (pci_irq_status == -1)
				goto out;
		}

		/* still nothing: set INTRTIE */
		if (ti12xx_tie_interrupts(socket, &old_irq)) {
			pci_irq_status = yenta_probe_cb_irq(socket);
			if (pci_irq_status == 1) {
				dev_printk(KERN_INFO, &socket->dev->dev,
				    "TI: parallel PCI interrupts, tied ok\n");
				goto out;
			}

			ti12xx_untie_interrupts(socket, old_irq);
		}
	}

out:
	if (pci_irq_status < 1) {
		socket->cb_irq = 0;
		dev_printk(KERN_INFO, &socket->dev->dev,
			   "TI: no PCI interrupts. Fish. Please report.\n");
	}
}


/* Returns true value if the second slot of a two-slot controller is empty */
static int ti12xx_2nd_slot_empty(struct yenta_socket *socket)
{
	struct pci_dev *func;
	struct yenta_socket *slot2;
	int devfn;
	unsigned int state;
	int ret = 1;
	u32 sysctl;

	/* catch the two-slot controllers */
	switch (socket->dev->device) {
	case PCI_DEVICE_ID_TI_1220:
	case PCI_DEVICE_ID_TI_1221:
	case PCI_DEVICE_ID_TI_1225:
	case PCI_DEVICE_ID_TI_1251A:
	case PCI_DEVICE_ID_TI_1251B:
	case PCI_DEVICE_ID_TI_1420:
	case PCI_DEVICE_ID_TI_1450:
	case PCI_DEVICE_ID_TI_1451A:
	case PCI_DEVICE_ID_TI_1520:
	case PCI_DEVICE_ID_TI_1620:
	case PCI_DEVICE_ID_TI_4520:
	case PCI_DEVICE_ID_TI_4450:
	case PCI_DEVICE_ID_TI_4451:
		/*
		 * there are way more, but they need to be added in yenta_socket.c
		 * and pci_ids.h first anyway.
		 */
		break;

	case PCI_DEVICE_ID_TI_XX12:
	case PCI_DEVICE_ID_TI_X515:
	case PCI_DEVICE_ID_TI_X420:
	case PCI_DEVICE_ID_TI_X620:
	case PCI_DEVICE_ID_TI_XX21_XX11:
	case PCI_DEVICE_ID_TI_7410:
	case PCI_DEVICE_ID_TI_7610:
		/*
		 * those are either single or dual slot CB with additional functions
		 * like 1394, smartcard reader, etc. check the TIEALL flag for them
		 * the TIEALL flag binds the IRQ of all functions toghether.
		 * we catch the single slot variants later.
		 */
		sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
		if (sysctl & TIXX21_SCR_TIEALL)
			return 0;

		break;

	/* single-slot controllers have the 2nd slot empty always :) */
	default:
		return 1;
	}

	/* get other slot */
	devfn = socket->dev->devfn & ~0x07;
	func = pci_get_slot(socket->dev->bus,
	                    (socket->dev->devfn & 0x07) ? devfn : devfn | 0x01);
	if (!func)
		return 1;

	/*
	 * check that the device id of both slots match. this is needed for the
	 * XX21 and the XX11 controller that share the same device id for single
	 * and dual slot controllers. return '2nd slot empty'. we already checked
	 * if the interrupt is tied to another function.
	 */
	if (socket->dev->device != func->device)
		goto out;

	slot2 = pci_get_drvdata(func);
	if (!slot2)
		goto out;

	/* check state */
	yenta_get_status(&slot2->socket, &state);
	if (state & SS_DETECT) {
		ret = 0;
		goto out;
	}

out:
	pci_dev_put(func);
	return ret;
}

/*
 * TI specifiy parts for the power hook.
 *
 * some TI's with some CB's produces interrupt storm on power on. it has been
 * seen with atheros wlan cards on TI1225 and TI1410. solution is simply to
 * disable any CB interrupts during this time.
 */
static int ti12xx_power_hook(struct pcmcia_socket *sock, int operation)
{
	struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
	u32 mfunc, devctl, sysctl;
	u8 gpio3;

	/* only POWER_PRE and POWER_POST are interesting */
	if ((operation != HOOK_POWER_PRE) && (operation != HOOK_POWER_POST))
		return 0;

	devctl = config_readb(socket, TI113X_DEVICE_CONTROL);
	sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
	mfunc = config_readl(socket, TI122X_MFUNC);

	/*
	 * all serial/tied: only disable when modparm set. always doing it
	 * would mean a regression for working setups 'cos it disables the
	 * interrupts for both both slots on 2-slot controllers
	 * (and users of single slot controllers where it's save have to
	 * live with setting the modparm, most don't have to anyway)
	 */
	if (((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) &&
	    (pwr_irqs_off || ti12xx_2nd_slot_empty(socket))) {
		switch (socket->dev->device) {
		case PCI_DEVICE_ID_TI_1250:
		case PCI_DEVICE_ID_TI_1251A:
		case PCI_DEVICE_ID_TI_1251B:
		case PCI_DEVICE_ID_TI_1450:
		case PCI_DEVICE_ID_TI_1451A:
		case PCI_DEVICE_ID_TI_4450:
		case PCI_DEVICE_ID_TI_4451:
			/* these chips have no IRQSER setting in MFUNC3  */
			break;

		default:
			if (operation == HOOK_POWER_PRE)
				mfunc = (mfunc & ~TI122X_MFUNC3_MASK);
			else
				mfunc = (mfunc & ~TI122X_MFUNC3_MASK) | TI122X_MFUNC3_IRQSER;
		}

		return 0;
	}

	/* do the job differently for func0/1 */
	if ((PCI_FUNC(socket->dev->devfn) == 0) ||
	    ((sysctl & TI122X_SCR_INTRTIE) &&
	     (pwr_irqs_off || ti12xx_2nd_slot_empty(socket)))) {
		/* some bridges are different */
		switch (socket->dev->device) {
		case PCI_DEVICE_ID_TI_1250:
		case PCI_DEVICE_ID_TI_1251A:
		case PCI_DEVICE_ID_TI_1251B:
		case PCI_DEVICE_ID_TI_1450:
			/* those oldies use gpio3 for INTA */
			gpio3 = config_readb(socket, TI1250_GPIO3_CONTROL);
			if (operation == HOOK_POWER_PRE)
				gpio3 = (gpio3 & ~TI1250_GPIO_MODE_MASK) | 0x40;
			else
				gpio3 &= ~TI1250_GPIO_MODE_MASK;
			config_writeb(socket, TI1250_GPIO3_CONTROL, gpio3);
			break;

		default:
			/* all new bridges are the same */
			if (operation == HOOK_POWER_PRE)
				mfunc &= ~TI122X_MFUNC0_MASK;
			else
				mfunc |= TI122X_MFUNC0_INTA;
			config_writel(socket, TI122X_MFUNC, mfunc);
		}
	} else {
		switch (socket->dev->device) {
		case PCI_DEVICE_ID_TI_1251A:
		case PCI_DEVICE_ID_TI_1251B:
		case PCI_DEVICE_ID_TI_1450:
			/* those have INTA elsewhere and INTB in MFUNC0 */
			if (operation == HOOK_POWER_PRE)
				mfunc &= ~TI122X_MFUNC0_MASK;
			else
				mfunc |= TI125X_MFUNC0_INTB;
			config_writel(socket, TI122X_MFUNC, mfunc);

			break;

		default:
			/* all new bridges are the same */
			if (operation == HOOK_POWER_PRE)
				mfunc &= ~TI122X_MFUNC1_MASK;
			else
				mfunc |= TI122X_MFUNC1_INTB;
			config_writel(socket, TI122X_MFUNC, mfunc);
		}
	}

	return 0;
}

static int ti12xx_override(struct yenta_socket *socket)
{
	u32 val, val_orig;

	/* make sure that memory burst is active */
	val_orig = val = config_readl(socket, TI113X_SYSTEM_CONTROL);
	if (disable_clkrun && PCI_FUNC(socket->dev->devfn) == 0) {
		dev_printk(KERN_INFO, &socket->dev->dev,
			   "Disabling CLKRUN feature\n");
		val |= TI113X_SCR_KEEPCLK;
	}
	if (!(val & TI122X_SCR_MRBURSTUP)) {
		dev_printk(KERN_INFO, &socket->dev->dev,
			   "Enabling burst memory read transactions\n");
		val |= TI122X_SCR_MRBURSTUP;
	}
	if (val_orig != val)
		config_writel(socket, TI113X_SYSTEM_CONTROL, val);

	/*
	 * Yenta expects controllers to use CSCINT to route
	 * CSC interrupts to PCI rather than INTVAL.
	 */
	val = config_readb(socket, TI1250_DIAGNOSTIC);
	dev_printk(KERN_INFO, &socket->dev->dev,
		   "Using %s to route CSC interrupts to PCI\n",
		   (val & TI1250_DIAG_PCI_CSC) ? "CSCINT" : "INTVAL");
	dev_printk(KERN_INFO, &socket->dev->dev,
		   "Routing CardBus interrupts to %s\n",
		   (val & TI1250_DIAG_PCI_IREQ) ? "PCI" : "ISA");

	/* do irqrouting, depending on function */
	if (PCI_FUNC(socket->dev->devfn) == 0)
		ti12xx_irqroute_func0(socket);
	else
		ti12xx_irqroute_func1(socket);

	/* install power hook */
	socket->socket.power_hook = ti12xx_power_hook;

	return ti_override(socket);
}


static int ti1250_override(struct yenta_socket *socket)
{
	u8 old, diag;

	old = config_readb(socket, TI1250_DIAGNOSTIC);
	diag = old & ~(TI1250_DIAG_PCI_CSC | TI1250_DIAG_PCI_IREQ);
	if (socket->cb_irq)
		diag |= TI1250_DIAG_PCI_CSC | TI1250_DIAG_PCI_IREQ;

	if (diag != old) {
		dev_printk(KERN_INFO, &socket->dev->dev,
			   "adjusting diagnostic: %02x -> %02x\n",
			   old, diag);
		config_writeb(socket, TI1250_DIAGNOSTIC, diag);
	}

	return ti12xx_override(socket);
}


/**
 * EnE specific part. EnE bridges are register compatible with TI bridges but
 * have their own test registers and more important their own little problems.
 * Some fixup code to make everybody happy (TM).
 */

#ifdef CONFIG_YENTA_ENE_TUNE
/*
 * set/clear various test bits:
 * Defaults to clear the bit.
 * - mask (u8) defines what bits to change
 * - bits (u8) is the values to change them to
 * -> it's
 * 	current = (current & ~mask) | bits
 */
/* pci ids of devices that wants to have the bit set */
#define DEVID(_vend,_dev,_subvend,_subdev,mask,bits) {		\
		.vendor		= _vend,			\
		.device		= _dev,				\
		.subvendor	= _subvend,			\
		.subdevice	= _subdev,			\
		.driver_data	= ((mask) << 8 | (bits)),	\
	}
static struct pci_device_id ene_tune_tbl[] = {
	/* Echo Audio products based on motorola DSP56301 and DSP56361 */
	DEVID(PCI_VENDOR_ID_MOTOROLA, 0x1801, 0xECC0, PCI_ANY_ID,
		ENE_TEST_C9_TLTENABLE | ENE_TEST_C9_PFENABLE, ENE_TEST_C9_TLTENABLE),
	DEVID(PCI_VENDOR_ID_MOTOROLA, 0x3410, 0xECC0, PCI_ANY_ID,
		ENE_TEST_C9_TLTENABLE | ENE_TEST_C9_PFENABLE, ENE_TEST_C9_TLTENABLE),

	{}
};

static void ene_tune_bridge(struct pcmcia_socket *sock, struct pci_bus *bus)
{
	struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
	struct pci_dev *dev;
	struct pci_device_id *id = NULL;
	u8 test_c9, old_c9, mask, bits;

	list_for_each_entry(dev, &bus->devices, bus_list) {
		id = (struct pci_device_id *) pci_match_id(ene_tune_tbl, dev);
		if (id)
			break;
	}

	test_c9 = old_c9 = config_readb(socket, ENE_TEST_C9);
	if (id) {
		mask = (id->driver_data >> 8) & 0xFF;
		bits = id->driver_data & 0xFF;

		test_c9 = (test_c9 & ~mask) | bits;
	}
	else
		/* default to clear TLTEnable bit, old behaviour */
		test_c9 &= ~ENE_TEST_C9_TLTENABLE;

	dev_printk(KERN_INFO, &socket->dev->dev,
		   "EnE: chaning testregister 0xC9, %02x -> %02x\n",
		   old_c9, test_c9);
	config_writeb(socket, ENE_TEST_C9, test_c9);
}

static int ene_override(struct yenta_socket *socket)
{
	/* install tune_bridge() function */
	socket->socket.tune_bridge = ene_tune_bridge;

	return ti1250_override(socket);
}
#else
#  define ene_override ti1250_override
#endif /* !CONFIG_YENTA_ENE_TUNE */

#endif /* _LINUX_TI113X_H */