aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/phy/phy-exynos4x12-usb2.c
blob: d92a7cc5698a13c971b966bc7acb159419c87358 (plain) (blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
/*
 * Samsung SoC USB 1.1/2.0 PHY driver - Exynos 4x12 support
 *
 * Copyright (C) 2013 Samsung Electronics Co., Ltd.
 * Author: Kamil Debski <k.debski@samsung.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/delay.h>
#include <linux/io.h>
#include <linux/phy/phy.h>
#include <linux/regmap.h>
#include "phy-samsung-usb2.h"

/* Exynos USB PHY registers */

/* PHY power control */
#define EXYNOS_4x12_UPHYPWR			0x0

#define EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND	BIT(0)
#define EXYNOS_4x12_UPHYPWR_PHY0_PWR		BIT(3)
#define EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR	BIT(4)
#define EXYNOS_4x12_UPHYPWR_PHY0_SLEEP		BIT(5)
#define EXYNOS_4x12_UPHYPWR_PHY0 ( \
	EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND | \
	EXYNOS_4x12_UPHYPWR_PHY0_PWR | \
	EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR | \
	EXYNOS_4x12_UPHYPWR_PHY0_SLEEP)

#define EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND	BIT(6)
#define EXYNOS_4x12_UPHYPWR_PHY1_PWR		BIT(7)
#define EXYNOS_4x12_UPHYPWR_PHY1_SLEEP		BIT(8)
#define EXYNOS_4x12_UPHYPWR_PHY1 ( \
	EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND | \
	EXYNOS_4x12_UPHYPWR_PHY1_PWR | \
	EXYNOS_4x12_UPHYPWR_PHY1_SLEEP)

#define EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND	BIT(9)
#define EXYNOS_4x12_UPHYPWR_HSIC0_PWR		BIT(10)
#define EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP		BIT(11)
#define EXYNOS_4x12_UPHYPWR_HSIC0 ( \
	EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND | \
	EXYNOS_4x12_UPHYPWR_HSIC0_PWR | \
	EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP)

#define EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND	BIT(12)
#define EXYNOS_4x12_UPHYPWR_HSIC1_PWR		BIT(13)
#define EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP		BIT(14)
#define EXYNOS_4x12_UPHYPWR_HSIC1 ( \
	EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND | \
	EXYNOS_4x12_UPHYPWR_HSIC1_PWR | \
	EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP)

/* PHY clock control */
#define EXYNOS_4x12_UPHYCLK			0x4

#define EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK	(0x7 << 0)
#define EXYNOS_4x12_UPHYCLK_PHYFSEL_OFFSET	0
#define EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6	(0x0 << 0)
#define EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ	(0x1 << 0)
#define EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ	(0x2 << 0)
#define EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2	(0x3 << 0)
#define EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ	(0x4 << 0)
#define EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ	(0x5 << 0)
#define EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ	(0x7 << 0)

#define EXYNOS_4x12_UPHYCLK_PHY0_ID_PULLUP	BIT(3)
#define EXYNOS_4x12_UPHYCLK_PHY0_COMMON_ON	BIT(4)
#define EXYNOS_4x12_UPHYCLK_PHY1_COMMON_ON	BIT(7)

#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_MASK	(0x7f << 10)
#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_OFFSET  10
#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_12MHZ	(0x24 << 10)
#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_15MHZ	(0x1c << 10)
#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_16MHZ	(0x1a << 10)
#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_19MHZ2	(0x15 << 10)
#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_20MHZ	(0x14 << 10)

/* PHY reset control */
#define EXYNOS_4x12_UPHYRST			0x8

#define EXYNOS_4x12_URSTCON_PHY0		BIT(0)
#define EXYNOS_4x12_URSTCON_OTG_HLINK		BIT(1)
#define EXYNOS_4x12_URSTCON_OTG_PHYLINK		BIT(2)
#define EXYNOS_4x12_URSTCON_HOST_PHY		BIT(3)
#define EXYNOS_4x12_URSTCON_PHY1		BIT(4)
#define EXYNOS_4x12_URSTCON_HSIC0		BIT(5)
#define EXYNOS_4x12_URSTCON_HSIC1		BIT(6)
#define EXYNOS_4x12_URSTCON_HOST_LINK_ALL	BIT(7)
#define EXYNOS_4x12_URSTCON_HOST_LINK_P0	BIT(8)
#define EXYNOS_4x12_URSTCON_HOST_LINK_P1	BIT(9)
#define EXYNOS_4x12_URSTCON_HOST_LINK_P2	BIT(10)

/* Isolation, configured in the power management unit */
#define EXYNOS_4x12_USB_ISOL_OFFSET		0x704
#define EXYNOS_4x12_USB_ISOL_OTG		BIT(0)
#define EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET	0x708
#define EXYNOS_4x12_USB_ISOL_HSIC0		BIT(0)
#define EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET	0x70c
#define EXYNOS_4x12_USB_ISOL_HSIC1		BIT(0)

/* Mode switching SUB Device <-> Host */
#define EXYNOS_4x12_MODE_SWITCH_OFFSET		0x21c
#define EXYNOS_4x12_MODE_SWITCH_MASK		1
#define EXYNOS_4x12_MODE_SWITCH_DEVICE		0
#define EXYNOS_4x12_MODE_SWITCH_HOST		1

enum exynos4x12_phy_id {
	EXYNOS4x12_DEVICE,
	EXYNOS4x12_HOST,
	EXYNOS4x12_HSIC0,
	EXYNOS4x12_HSIC1,
	EXYNOS4x12_NUM_PHYS,
};

/*
 * exynos4x12_rate_to_clk() converts the supplied clock rate to the value that
 * can be written to the phy register.
 */
static int exynos4x12_rate_to_clk(unsigned long rate, u32 *reg)
{
	/* EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK */

	switch (rate) {
	case 9600 * KHZ:
		*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6;
		break;
	case 10 * MHZ:
		*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ;
		break;
	case 12 * MHZ:
		*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ;
		break;
	case 19200 * KHZ:
		*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2;
		break;
	case 20 * MHZ:
		*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ;
		break;
	case 24 * MHZ:
		*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ;
		break;
	case 50 * MHZ:
		*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ;
		break;
	default:
		return -EINVAL;
	}

	return 0;
}

static void exynos4x12_isol(struct samsung_usb2_phy_instance *inst, bool on)
{
	struct samsung_usb2_phy_driver *drv = inst->drv;
	u32 offset;
	u32 mask;

	switch (inst->cfg->id) {
	case EXYNOS4x12_DEVICE:
	case EXYNOS4x12_HOST:
		offset = EXYNOS_4x12_USB_ISOL_OFFSET;
		mask = EXYNOS_4x12_USB_ISOL_OTG;
		break;
	case EXYNOS4x12_HSIC0:
		offset = EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET;
		mask = EXYNOS_4x12_USB_ISOL_HSIC0;
		break;
	case EXYNOS4x12_HSIC1:
		offset = EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET;
		mask = EXYNOS_4x12_USB_ISOL_HSIC1;
		break;
	default:
		return;
	};

	regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask);
}

static void exynos4x12_setup_clk(struct samsung_usb2_phy_instance *inst)
{
	struct samsung_usb2_phy_driver *drv = inst->drv;
	u32 clk;

	clk = readl(drv->reg_phy + EXYNOS_4x12_UPHYCLK);
	clk &= ~EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK;
	clk |= drv->ref_reg_val << EXYNOS_4x12_UPHYCLK_PHYFSEL_OFFSET;
	writel(clk, drv->reg_phy + EXYNOS_4x12_UPHYCLK);
}

static void exynos4x12_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on)
{
	struct samsung_usb2_phy_driver *drv = inst->drv;
	u32 rstbits = 0;
	u32 phypwr = 0;
	u32 rst;
	u32 pwr;
	u32 mode = 0;
	u32 switch_mode = 0;

	switch (inst->cfg->id) {
	case EXYNOS4x12_DEVICE:
		phypwr =	EXYNOS_4x12_UPHYPWR_PHY0;
		rstbits =	EXYNOS_4x12_URSTCON_PHY0;
		mode =		EXYNOS_4x12_MODE_SWITCH_DEVICE;
		switch_mode =	1;
		break;
	case EXYNOS4x12_HOST:
		phypwr =	EXYNOS_4x12_UPHYPWR_PHY1;
		rstbits =	EXYNOS_4x12_URSTCON_HOST_PHY;
		mode =		EXYNOS_4x12_MODE_SWITCH_HOST;
		switch_mode =	1;
		break;
	case EXYNOS4x12_HSIC0:
		phypwr =	EXYNOS_4x12_UPHYPWR_HSIC0;
		rstbits =	EXYNOS_4x12_URSTCON_HSIC1 |
				EXYNOS_4x12_URSTCON_HOST_LINK_P0 |
				EXYNOS_4x12_URSTCON_HOST_PHY;
		break;
	case EXYNOS4x12_HSIC1:
		phypwr =	EXYNOS_4x12_UPHYPWR_HSIC1;
		rstbits =	EXYNOS_4x12_URSTCON_HSIC1 |
				EXYNOS_4x12_URSTCON_HOST_LINK_P1;
		break;
	};

	if (on) {
		if (switch_mode)
			regmap_update_bits(drv->reg_sys,
					   EXYNOS_4x12_MODE_SWITCH_OFFSET,
					   EXYNOS_4x12_MODE_SWITCH_MASK, mode);

		pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR);
		pwr &= ~phypwr;
		writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR);

		rst = readl(drv->reg_phy + EXYNOS_4x12_UPHYRST);
		rst |= rstbits;
		writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST);
		udelay(10);
		rst &= ~rstbits;
		writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST);
		/* The following delay is necessary for the reset sequence to be
		 * completed */
		udelay(80);
	} else {
		pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR);
		pwr |= phypwr;
		writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR);
	}
}

static int exynos4x12_power_on(struct samsung_usb2_phy_instance *inst)
{
	struct samsung_usb2_phy_driver *drv = inst->drv;

	inst->enabled = 1;
	exynos4x12_setup_clk(inst);
	exynos4x12_phy_pwr(inst, 1);
	exynos4x12_isol(inst, 0);

	/* Power on the device, as it is necessary for HSIC to work */
	if (inst->cfg->id == EXYNOS4x12_HSIC0) {
		struct samsung_usb2_phy_instance *device =
					&drv->instances[EXYNOS4x12_DEVICE];
		exynos4x12_phy_pwr(device, 1);
		exynos4x12_isol(device, 0);
	}

	return 0;
}

static int exynos4x12_power_off(struct samsung_usb2_phy_instance *inst)
{
	struct samsung_usb2_phy_driver *drv = inst->drv;
	struct samsung_usb2_phy_instance *device =
					&drv->instances[EXYNOS4x12_DEVICE];

	inst->enabled = 0;
	exynos4x12_isol(inst, 1);
	exynos4x12_phy_pwr(inst, 0);

	if (inst->cfg->id == EXYNOS4x12_HSIC0 && !device->enabled) {
		exynos4x12_isol(device, 1);
		exynos4x12_phy_pwr(device, 0);
	}

	return 0;
}


static const struct samsung_usb2_common_phy exynos4x12_phys[] = {
	{
		.label		= "device",
		.id		= EXYNOS4x12_DEVICE,
		.power_on	= exynos4x12_power_on,
		.power_off	= exynos4x12_power_off,
	},
	{
		.label		= "host",
		.id		= EXYNOS4x12_HOST,
		.power_on	= exynos4x12_power_on,
		.power_off	= exynos4x12_power_off,
	},
	{
		.label		= "hsic0",
		.id		= EXYNOS4x12_HSIC0,
		.power_on	= exynos4x12_power_on,
		.power_off	= exynos4x12_power_off,
	},
	{
		.label		= "hsic1",
		.id		= EXYNOS4x12_HSIC1,
		.power_on	= exynos4x12_power_on,
		.power_off	= exynos4x12_power_off,
	},
	{},
};

const struct samsung_usb2_phy_config exynos4x12_usb2_phy_config = {
	.has_mode_switch	= 1,
	.num_phys		= EXYNOS4x12_NUM_PHYS,
	.phys			= exynos4x12_phys,
	.rate_to_clk		= exynos4x12_rate_to_clk,
};