1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
|
/*
* adv_pci1724.c
* Comedi driver for the Advantech PCI-1724U card.
*
* Author: Frank Mori Hess <fmh6jj@gmail.com>
* Copyright (C) 2013 GnuBIO Inc
*
* COMEDI - Linux Control and Measurement Device Interface
* Copyright (C) 1997-8 David A. Schleef <ds@schleef.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/*
* Driver: adv_pci1724
* Description: Advantech PCI-1724U
* Devices: [Advantech] PCI-1724U (adv_pci1724)
* Author: Frank Mori Hess <fmh6jj@gmail.com>
* Updated: 2013-02-09
* Status: works
*
* Configuration Options: not applicable, uses comedi PCI auto config
*
* Subdevice 0 is the analog output.
* Subdevice 1 is the offset calibration for the analog output.
* Subdevice 2 is the gain calibration for the analog output.
*
* The calibration offset and gains have quite a large effect on the
* analog output, so it is possible to adjust the analog output to
* have an output range significantly different from the board's
* nominal output ranges. For a calibrated +/-10V range, the analog
* output's offset will be set somewhere near mid-range (0x2000) and
* its gain will be near maximum (0x3fff).
*
* There is really no difference between the board's documented 0-20mA
* versus 4-20mA output ranges. To pick one or the other is simply a
* matter of adjusting the offset and gain calibration until the board
* outputs in the desired range.
*/
#include <linux/module.h>
#include <linux/pci.h>
#include "../comedidev.h"
/*
* PCI bar 2 Register I/O map (dev->iobase)
*/
#define PCI1724_DAC_CTRL_REG 0x00
#define PCI1724_DAC_CTRL_GX(x) (1 << (20 + ((x) / 8)))
#define PCI1724_DAC_CTRL_CX(x) (((x) % 8) << 16)
#define PCI1724_DAC_CTRL_MODE_GAIN (1 << 14)
#define PCI1724_DAC_CTRL_MODE_OFFSET (2 << 14)
#define PCI1724_DAC_CTRL_MODE_NORMAL (3 << 14)
#define PCI1724_DAC_CTRL_MODE_MASK (3 << 14)
#define PCI1724_DAC_CTRL_DATA(x) (((x) & 0x3fff) << 0)
#define PCI1724_SYNC_CTRL_REG 0x04
#define PCI1724_SYNC_CTRL_DACSTAT (1 << 1)
#define PCI1724_SYNC_CTRL_SYN (1 << 0)
#define PCI1724_EEPROM_CTRL_REG 0x08
#define PCI1724_SYNC_TRIG_REG 0x0c /* any value works */
#define PCI1724_BOARD_ID_REG 0x10
#define PCI1724_BOARD_ID_MASK (0xf << 0)
static const struct comedi_lrange adv_pci1724_ao_ranges = {
4, {
BIP_RANGE(10),
RANGE_mA(0, 20),
RANGE_mA(4, 20),
RANGE_unitless(0, 1)
}
};
static int adv_pci1724_dac_idle(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned long context)
{
unsigned int status;
status = inl(dev->iobase + PCI1724_SYNC_CTRL_REG);
if ((status & PCI1724_SYNC_CTRL_DACSTAT) == 0)
return 0;
return -EBUSY;
}
static int adv_pci1724_insn_write(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned long mode = (unsigned long)s->private;
unsigned int chan = CR_CHAN(insn->chanspec);
unsigned int ctrl;
int ret;
int i;
ctrl = PCI1724_DAC_CTRL_GX(chan) | PCI1724_DAC_CTRL_CX(chan) | mode;
/* turn off synchronous mode */
outl(0, dev->iobase + PCI1724_SYNC_CTRL_REG);
for (i = 0; i < insn->n; ++i) {
unsigned int val = data[i];
ret = comedi_timeout(dev, s, insn, adv_pci1724_dac_idle, 0);
if (ret)
return ret;
outl(ctrl | PCI1724_DAC_CTRL_DATA(val),
dev->iobase + PCI1724_DAC_CTRL_REG);
s->readback[chan] = val;
}
return insn->n;
}
static int adv_pci1724_auto_attach(struct comedi_device *dev,
unsigned long context_unused)
{
struct pci_dev *pcidev = comedi_to_pci_dev(dev);
struct comedi_subdevice *s;
unsigned int board_id;
int ret;
ret = comedi_pci_enable(dev);
if (ret)
return ret;
dev->iobase = pci_resource_start(pcidev, 2);
board_id = inl(dev->iobase + PCI1724_BOARD_ID_REG);
dev_info(dev->class_dev, "board id: %d\n",
board_id & PCI1724_BOARD_ID_MASK);
ret = comedi_alloc_subdevices(dev, 3);
if (ret)
return ret;
/* Analog Output subdevice */
s = &dev->subdevices[0];
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_GROUND;
s->n_chan = 32;
s->maxdata = 0x3fff;
s->range_table = &adv_pci1724_ao_ranges;
s->insn_write = adv_pci1724_insn_write;
s->private = (void *)PCI1724_DAC_CTRL_MODE_NORMAL;
ret = comedi_alloc_subdev_readback(s);
if (ret)
return ret;
/* Offset Calibration subdevice */
s = &dev->subdevices[1];
s->type = COMEDI_SUBD_CALIB;
s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL;
s->n_chan = 32;
s->maxdata = 0x3fff;
s->insn_write = adv_pci1724_insn_write;
s->private = (void *)PCI1724_DAC_CTRL_MODE_OFFSET;
ret = comedi_alloc_subdev_readback(s);
if (ret)
return ret;
/* Gain Calibration subdevice */
s = &dev->subdevices[2];
s->type = COMEDI_SUBD_CALIB;
s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL;
s->n_chan = 32;
s->maxdata = 0x3fff;
s->insn_write = adv_pci1724_insn_write;
s->private = (void *)PCI1724_DAC_CTRL_MODE_GAIN;
ret = comedi_alloc_subdev_readback(s);
if (ret)
return ret;
return 0;
}
static struct comedi_driver adv_pci1724_driver = {
.driver_name = "adv_pci1724",
.module = THIS_MODULE,
.auto_attach = adv_pci1724_auto_attach,
.detach = comedi_pci_detach,
};
static int adv_pci1724_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
return comedi_pci_auto_config(dev, &adv_pci1724_driver,
id->driver_data);
}
static const struct pci_device_id adv_pci1724_pci_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1724) },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, adv_pci1724_pci_table);
static struct pci_driver adv_pci1724_pci_driver = {
.name = "adv_pci1724",
.id_table = adv_pci1724_pci_table,
.probe = adv_pci1724_pci_probe,
.remove = comedi_pci_auto_unconfig,
};
module_comedi_pci_driver(adv_pci1724_driver, adv_pci1724_pci_driver);
MODULE_AUTHOR("Frank Mori Hess <fmh6jj@gmail.com>");
MODULE_DESCRIPTION("Advantech PCI-1724U Comedi driver");
MODULE_LICENSE("GPL");
|
