1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
|
/*
* comedi/drivers/dt2817.c
* Hardware driver for Data Translation DT2817
*
* COMEDI - Linux Control and Measurement Device Interface
* Copyright (C) 1998 David A. Schleef <ds@schleef.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/*
* Driver: dt2817
* Description: Data Translation DT2817
* Author: ds
* Status: complete
* Devices: [Data Translation] DT2817 (dt2817)
*
* A very simple digital I/O card. Four banks of 8 lines, each bank
* is configurable for input or output. One wonders why it takes a
* 50 page manual to describe this thing.
*
* The driver (which, btw, is much less than 50 pages) has 1 subdevice
* with 32 channels, configurable in groups of 8.
*
* Configuration options:
* [0] - I/O port base base address
*/
#include <linux/module.h>
#include "../comedidev.h"
#define DT2817_CR 0
#define DT2817_DATA 1
static int dt2817_dio_insn_config(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned int chan = CR_CHAN(insn->chanspec);
unsigned int oe = 0;
unsigned int mask;
int ret;
if (chan < 8)
mask = 0x000000ff;
else if (chan < 16)
mask = 0x0000ff00;
else if (chan < 24)
mask = 0x00ff0000;
else
mask = 0xff000000;
ret = comedi_dio_insn_config(dev, s, insn, data, mask);
if (ret)
return ret;
if (s->io_bits & 0x000000ff)
oe |= 0x1;
if (s->io_bits & 0x0000ff00)
oe |= 0x2;
if (s->io_bits & 0x00ff0000)
oe |= 0x4;
if (s->io_bits & 0xff000000)
oe |= 0x8;
outb(oe, dev->iobase + DT2817_CR);
return insn->n;
}
static int dt2817_dio_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned long iobase = dev->iobase + DT2817_DATA;
unsigned int mask;
unsigned int val;
mask = comedi_dio_update_state(s, data);
if (mask) {
if (mask & 0x000000ff)
outb(s->state & 0xff, iobase + 0);
if (mask & 0x0000ff00)
outb((s->state >> 8) & 0xff, iobase + 1);
if (mask & 0x00ff0000)
outb((s->state >> 16) & 0xff, iobase + 2);
if (mask & 0xff000000)
outb((s->state >> 24) & 0xff, iobase + 3);
}
val = inb(iobase + 0);
val |= (inb(iobase + 1) << 8);
val |= (inb(iobase + 2) << 16);
val |= (inb(iobase + 3) << 24);
data[1] = val;
return insn->n;
}
static int dt2817_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
int ret;
struct comedi_subdevice *s;
ret = comedi_request_region(dev, it->options[0], 0x5);
if (ret)
return ret;
ret = comedi_alloc_subdevices(dev, 1);
if (ret)
return ret;
s = &dev->subdevices[0];
s->n_chan = 32;
s->type = COMEDI_SUBD_DIO;
s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
s->range_table = &range_digital;
s->maxdata = 1;
s->insn_bits = dt2817_dio_insn_bits;
s->insn_config = dt2817_dio_insn_config;
s->state = 0;
outb(0, dev->iobase + DT2817_CR);
return 0;
}
static struct comedi_driver dt2817_driver = {
.driver_name = "dt2817",
.module = THIS_MODULE,
.attach = dt2817_attach,
.detach = comedi_legacy_detach,
};
module_comedi_driver(dt2817_driver);
MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Comedi low-level driver");
MODULE_LICENSE("GPL");
|
