1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
|
/*
comedi/drivers/rtd520.h
Comedi driver defines for Real Time Devices (RTD) PCI4520/DM7520
COMEDI - Linux Control and Measurement Device Interface
Copyright (C) 2001 David A. Schleef <ds@schleef.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
Created by Dan Christian, NASA Ames Research Center.
See board notes in rtd520.c
*/
/*
LAS0 Runtime Area
Local Address Space 0 Offset Read Function Write Function
*/
#define LAS0_SPARE_00 0x0000 /* - - */
#define LAS0_SPARE_04 0x0004 /* - - */
#define LAS0_USER_IO 0x0008 /* Read User Inputs Write User Outputs */
#define LAS0_SPARE_0C 0x000C /* - - */
#define LAS0_ADC 0x0010 /* Read FIFO Status Software A/D Start */
#define LAS0_DAC1 0x0014 /* - Software D/A1 Update */
#define LAS0_DAC2 0x0018 /* - Software D/A2 Update */
#define LAS0_SPARE_1C 0x001C /* - - */
#define LAS0_SPARE_20 0x0020 /* - - */
#define LAS0_DAC 0x0024 /* - Software Simultaneous D/A1 and D/A2 Update */
#define LAS0_PACER 0x0028 /* Software Pacer Start Software Pacer Stop */
#define LAS0_TIMER 0x002C /* Read Timer Counters Status HDIN Software Trigger */
#define LAS0_IT 0x0030 /* Read Interrupt Status Write Interrupt Enable Mask Register */
#define LAS0_CLEAR 0x0034 /* Clear ITs set by Clear Mask Set Interrupt Clear Mask */
#define LAS0_OVERRUN 0x0038 /* Read pending interrupts Clear Overrun Register */
#define LAS0_SPARE_3C 0x003C /* - - */
/*
LAS0 Runtime Area Timer/Counter,Dig.IO
Name Local Address Function
*/
#define LAS0_PCLK 0x0040 /* Pacer Clock value (24bit) Pacer Clock load (24bit) */
#define LAS0_BCLK 0x0044 /* Burst Clock value (10bit) Burst Clock load (10bit) */
#define LAS0_ADC_SCNT 0x0048 /* A/D Sample counter value (10bit) A/D Sample counter load (10bit) */
#define LAS0_DAC1_UCNT 0x004C /* D/A1 Update counter value (10 bit) D/A1 Update counter load (10bit) */
#define LAS0_DAC2_UCNT 0x0050 /* D/A2 Update counter value (10 bit) D/A2 Update counter load (10bit) */
#define LAS0_DCNT 0x0054 /* Delay counter value (16 bit) Delay counter load (16bit) */
#define LAS0_ACNT 0x0058 /* About counter value (16 bit) About counter load (16bit) */
#define LAS0_DAC_CLK 0x005C /* DAC clock value (16bit) DAC clock load (16bit) */
#define LAS0_UTC0 0x0060 /* 8254 TC Counter 0 User TC 0 value Load count in TC Counter 0 */
#define LAS0_UTC1 0x0064 /* 8254 TC Counter 1 User TC 1 value Load count in TC Counter 1 */
#define LAS0_UTC2 0x0068 /* 8254 TC Counter 2 User TC 2 value Load count in TC Counter 2 */
#define LAS0_UTC_CTRL 0x006C /* 8254 TC Control Word Program counter mode for TC */
#define LAS0_DIO0 0x0070 /* Digital I/O Port 0 Read Port Digital I/O Port 0 Write Port */
#define LAS0_DIO1 0x0074 /* Digital I/O Port 1 Read Port Digital I/O Port 1 Write Port */
#define LAS0_DIO0_CTRL 0x0078 /* Clear digital IRQ status flag/read Clear digital chip/program Port 0 */
#define LAS0_DIO_STATUS 0x007C /* Read Digital I/O Status word Program digital control register & */
/*
LAS0 Setup Area
Name Local Address Function
*/
#define LAS0_BOARD_RESET 0x0100 /* Board reset */
#define LAS0_DMA0_SRC 0x0104 /* DMA 0 Sources select */
#define LAS0_DMA1_SRC 0x0108 /* DMA 1 Sources select */
#define LAS0_ADC_CONVERSION 0x010C /* A/D Conversion Signal select */
#define LAS0_BURST_START 0x0110 /* Burst Clock Start Trigger select */
#define LAS0_PACER_START 0x0114 /* Pacer Clock Start Trigger select */
#define LAS0_PACER_STOP 0x0118 /* Pacer Clock Stop Trigger select */
#define LAS0_ACNT_STOP_ENABLE 0x011C /* About Counter Stop Enable */
#define LAS0_PACER_REPEAT 0x0120 /* Pacer Start Trigger Mode select */
#define LAS0_DIN_START 0x0124 /* High Speed Digital Input Sampling Signal select */
#define LAS0_DIN_FIFO_CLEAR 0x0128 /* Digital Input FIFO Clear */
#define LAS0_ADC_FIFO_CLEAR 0x012C /* A/D FIFO Clear */
#define LAS0_CGT_WRITE 0x0130 /* Channel Gain Table Write */
#define LAS0_CGL_WRITE 0x0134 /* Channel Gain Latch Write */
#define LAS0_CG_DATA 0x0138 /* Digital Table Write */
#define LAS0_CGT_ENABLE 0x013C /* Channel Gain Table Enable */
#define LAS0_CG_ENABLE 0x0140 /* Digital Table Enable */
#define LAS0_CGT_PAUSE 0x0144 /* Table Pause Enable */
#define LAS0_CGT_RESET 0x0148 /* Reset Channel Gain Table */
#define LAS0_CGT_CLEAR 0x014C /* Clear Channel Gain Table */
#define LAS0_DAC1_CTRL 0x0150 /* D/A1 output type/range */
#define LAS0_DAC1_SRC 0x0154 /* D/A1 update source */
#define LAS0_DAC1_CYCLE 0x0158 /* D/A1 cycle mode */
#define LAS0_DAC1_RESET 0x015C /* D/A1 FIFO reset */
#define LAS0_DAC1_FIFO_CLEAR 0x0160 /* D/A1 FIFO clear */
#define LAS0_DAC2_CTRL 0x0164 /* D/A2 output type/range */
#define LAS0_DAC2_SRC 0x0168 /* D/A2 update source */
#define LAS0_DAC2_CYCLE 0x016C /* D/A2 cycle mode */
#define LAS0_DAC2_RESET 0x0170 /* D/A2 FIFO reset */
#define LAS0_DAC2_FIFO_CLEAR 0x0174 /* D/A2 FIFO clear */
#define LAS0_ADC_SCNT_SRC 0x0178 /* A/D Sample Counter Source select */
#define LAS0_PACER_SELECT 0x0180 /* Pacer Clock select */
#define LAS0_SBUS0_SRC 0x0184 /* SyncBus 0 Source select */
#define LAS0_SBUS0_ENABLE 0x0188 /* SyncBus 0 enable */
#define LAS0_SBUS1_SRC 0x018C /* SyncBus 1 Source select */
#define LAS0_SBUS1_ENABLE 0x0190 /* SyncBus 1 enable */
#define LAS0_SBUS2_SRC 0x0198 /* SyncBus 2 Source select */
#define LAS0_SBUS2_ENABLE 0x019C /* SyncBus 2 enable */
#define LAS0_ETRG_POLARITY 0x01A4 /* External Trigger polarity select */
#define LAS0_EINT_POLARITY 0x01A8 /* External Interrupt polarity select */
#define LAS0_UTC0_CLOCK 0x01AC /* UTC0 Clock select */
#define LAS0_UTC0_GATE 0x01B0 /* UTC0 Gate select */
#define LAS0_UTC1_CLOCK 0x01B4 /* UTC1 Clock select */
#define LAS0_UTC1_GATE 0x01B8 /* UTC1 Gate select */
#define LAS0_UTC2_CLOCK 0x01BC /* UTC2 Clock select */
#define LAS0_UTC2_GATE 0x01C0 /* UTC2 Gate select */
#define LAS0_UOUT0_SELECT 0x01C4 /* User Output 0 source select */
#define LAS0_UOUT1_SELECT 0x01C8 /* User Output 1 source select */
#define LAS0_DMA0_RESET 0x01CC /* DMA0 Request state machine reset */
#define LAS0_DMA1_RESET 0x01D0 /* DMA1 Request state machine reset */
/*
LAS1
Name Local Address Function
*/
#define LAS1_ADC_FIFO 0x0000 /* Read A/D FIFO (16bit) - */
#define LAS1_HDIO_FIFO 0x0004 /* Read High Speed Digital Input FIFO (16bit) - */
#define LAS1_DAC1_FIFO 0x0008 /* - Write D/A1 FIFO (16bit) */
#define LAS1_DAC2_FIFO 0x000C /* - Write D/A2 FIFO (16bit) */
/*
LCFG: PLX 9080 local config & runtime registers
Name Local Address Function
*/
#define LCFG_ITCSR 0x0068 /* INTCSR, Interrupt Control/Status Register */
#define LCFG_DMAMODE0 0x0080 /* DMA Channel 0 Mode Register */
#define LCFG_DMAPADR0 0x0084 /* DMA Channel 0 PCI Address Register */
#define LCFG_DMALADR0 0x0088 /* DMA Channel 0 Local Address Reg */
#define LCFG_DMASIZ0 0x008C /* DMA Channel 0 Transfer Size (Bytes) Register */
#define LCFG_DMADPR0 0x0090 /* DMA Channel 0 Descriptor Pointer Register */
#define LCFG_DMAMODE1 0x0094 /* DMA Channel 1 Mode Register */
#define LCFG_DMAPADR1 0x0098 /* DMA Channel 1 PCI Address Register */
#define LCFG_DMALADR1 0x009C /* DMA Channel 1 Local Address Register */
#define LCFG_DMASIZ1 0x00A0 /* DMA Channel 1 Transfer Size (Bytes) Register */
#define LCFG_DMADPR1 0x00A4 /* DMA Channel 1 Descriptor Pointer Register */
#define LCFG_DMACSR0 0x00A8 /* DMA Channel 0 Command/Status Register */
#define LCFG_DMACSR1 0x00A9 /* DMA Channel 0 Command/Status Register */
#define LCFG_DMAARB 0x00AC /* DMA Arbitration Register */
#define LCFG_DMATHR 0x00B0 /* DMA Threshold Register */
/*======================================================================
Resister bit definitions
======================================================================*/
/* FIFO Status Word Bits (RtdFifoStatus) */
#define FS_DAC1_NOT_EMPTY 0x0001 /* D0 - DAC1 FIFO not empty */
#define FS_DAC1_HEMPTY 0x0002 /* D1 - DAC1 FIFO half empty */
#define FS_DAC1_NOT_FULL 0x0004 /* D2 - DAC1 FIFO not full */
#define FS_DAC2_NOT_EMPTY 0x0010 /* D4 - DAC2 FIFO not empty */
#define FS_DAC2_HEMPTY 0x0020 /* D5 - DAC2 FIFO half empty */
#define FS_DAC2_NOT_FULL 0x0040 /* D6 - DAC2 FIFO not full */
#define FS_ADC_NOT_EMPTY 0x0100 /* D8 - ADC FIFO not empty */
#define FS_ADC_HEMPTY 0x0200 /* D9 - ADC FIFO half empty */
#define FS_ADC_NOT_FULL 0x0400 /* D10 - ADC FIFO not full */
#define FS_DIN_NOT_EMPTY 0x1000 /* D12 - DIN FIFO not empty */
#define FS_DIN_HEMPTY 0x2000 /* D13 - DIN FIFO half empty */
#define FS_DIN_NOT_FULL 0x4000 /* D14 - DIN FIFO not full */
/* Timer Status Word Bits (GetTimerStatus) */
#define TS_PCLK_GATE 0x0001
/* D0 - Pacer Clock Gate [0 - gated, 1 - enabled] */
#define TS_BCLK_GATE 0x0002
/* D1 - Burst Clock Gate [0 - disabled, 1 - running] */
#define TS_DCNT_GATE 0x0004
/* D2 - Pacer Clock Delayed Start Trigger [0 - delay over, 1 - delay in */
/* progress] */
#define TS_ACNT_GATE 0x0008
/* D3 - Pacer Clock About Trigger [0 - completed, 1 - in progress] */
#define TS_PCLK_RUN 0x0010
/* D4 - Pacer Clock Shutdown Flag [0 - Pacer Clock cannot be start */
/* triggered only by Software Pacer Start Command, 1 - Pacer Clock can */
/* be start triggered] */
/* External Trigger polarity select */
/* External Interrupt polarity select */
#define POL_POSITIVE 0x0 /* positive edge */
#define POL_NEGATIVE 0x1 /* negative edge */
/* User Output Signal select (SetUout0Source, SetUout1Source) */
#define UOUT_ADC 0x0 /* A/D Conversion Signal */
#define UOUT_DAC1 0x1 /* D/A1 Update */
#define UOUT_DAC2 0x2 /* D/A2 Update */
#define UOUT_SOFTWARE 0x3 /* Software Programmable */
/* Pacer clock select (SetPacerSource) */
#define PCLK_INTERNAL 1 /* Internal Pacer Clock */
#define PCLK_EXTERNAL 0 /* External Pacer Clock */
/* A/D Sample Counter Sources (SetAdcntSource, SetupSampleCounter) */
#define ADC_SCNT_CGT_RESET 0x0 /* needs restart with StartPacer */
#define ADC_SCNT_FIFO_WRITE 0x1
/* A/D Conversion Signal Select (for SetConversionSelect) */
#define ADC_START_SOFTWARE 0x0 /* Software A/D Start */
#define ADC_START_PCLK 0x1 /* Pacer Clock (Ext. Int. see Func.509) */
#define ADC_START_BCLK 0x2 /* Burst Clock */
#define ADC_START_DIGITAL_IT 0x3 /* Digital Interrupt */
#define ADC_START_DAC1_MARKER1 0x4 /* D/A 1 Data Marker 1 */
#define ADC_START_DAC2_MARKER1 0x5 /* D/A 2 Data Marker 1 */
#define ADC_START_SBUS0 0x6 /* SyncBus 0 */
#define ADC_START_SBUS1 0x7 /* SyncBus 1 */
#define ADC_START_SBUS2 0x8 /* SyncBus 2 */
/* Burst Clock start trigger select (SetBurstStart) */
#define BCLK_START_SOFTWARE 0x0 /* Software A/D Start (StartBurst) */
#define BCLK_START_PCLK 0x1 /* Pacer Clock */
#define BCLK_START_ETRIG 0x2 /* External Trigger */
#define BCLK_START_DIGITAL_IT 0x3 /* Digital Interrupt */
#define BCLK_START_SBUS0 0x4 /* SyncBus 0 */
#define BCLK_START_SBUS1 0x5 /* SyncBus 1 */
#define BCLK_START_SBUS2 0x6 /* SyncBus 2 */
/* Pacer Clock start trigger select (SetPacerStart) */
#define PCLK_START_SOFTWARE 0x0 /* Software Pacer Start (StartPacer) */
#define PCLK_START_ETRIG 0x1 /* External trigger */
#define PCLK_START_DIGITAL_IT 0x2 /* Digital interrupt */
#define PCLK_START_UTC2 0x3 /* User TC 2 out */
#define PCLK_START_SBUS0 0x4 /* SyncBus 0 */
#define PCLK_START_SBUS1 0x5 /* SyncBus 1 */
#define PCLK_START_SBUS2 0x6 /* SyncBus 2 */
#define PCLK_START_D_SOFTWARE 0x8 /* Delayed Software Pacer Start */
#define PCLK_START_D_ETRIG 0x9 /* Delayed external trigger */
#define PCLK_START_D_DIGITAL_IT 0xA /* Delayed digital interrupt */
#define PCLK_START_D_UTC2 0xB /* Delayed User TC 2 out */
#define PCLK_START_D_SBUS0 0xC /* Delayed SyncBus 0 */
#define PCLK_START_D_SBUS1 0xD /* Delayed SyncBus 1 */
#define PCLK_START_D_SBUS2 0xE /* Delayed SyncBus 2 */
#define PCLK_START_ETRIG_GATED 0xF /* External Trigger Gated controlled mode */
/* Pacer Clock Stop Trigger select (SetPacerStop) */
#define PCLK_STOP_SOFTWARE 0x0 /* Software Pacer Stop (StopPacer) */
#define PCLK_STOP_ETRIG 0x1 /* External Trigger */
#define PCLK_STOP_DIGITAL_IT 0x2 /* Digital Interrupt */
#define PCLK_STOP_ACNT 0x3 /* About Counter */
#define PCLK_STOP_UTC2 0x4 /* User TC2 out */
#define PCLK_STOP_SBUS0 0x5 /* SyncBus 0 */
#define PCLK_STOP_SBUS1 0x6 /* SyncBus 1 */
#define PCLK_STOP_SBUS2 0x7 /* SyncBus 2 */
#define PCLK_STOP_A_SOFTWARE 0x8 /* About Software Pacer Stop */
#define PCLK_STOP_A_ETRIG 0x9 /* About External Trigger */
#define PCLK_STOP_A_DIGITAL_IT 0xA /* About Digital Interrupt */
#define PCLK_STOP_A_UTC2 0xC /* About User TC2 out */
#define PCLK_STOP_A_SBUS0 0xD /* About SyncBus 0 */
#define PCLK_STOP_A_SBUS1 0xE /* About SyncBus 1 */
#define PCLK_STOP_A_SBUS2 0xF /* About SyncBus 2 */
/* About Counter Stop Enable */
#define ACNT_STOP 0x0 /* stop enable */
#define ACNT_NO_STOP 0x1 /* stop disabled */
/* DAC update source (SetDAC1Start & SetDAC2Start) */
#define DAC_START_SOFTWARE 0x0 /* Software Update */
#define DAC_START_CGT 0x1 /* CGT controlled Update */
#define DAC_START_DAC_CLK 0x2 /* D/A Clock */
#define DAC_START_EPCLK 0x3 /* External Pacer Clock */
#define DAC_START_SBUS0 0x4 /* SyncBus 0 */
#define DAC_START_SBUS1 0x5 /* SyncBus 1 */
#define DAC_START_SBUS2 0x6 /* SyncBus 2 */
/* DAC Cycle Mode (SetDAC1Cycle, SetDAC2Cycle, SetupDAC) */
#define DAC_CYCLE_SINGLE 0x0 /* not cycle */
#define DAC_CYCLE_MULTI 0x1 /* cycle */
/* 8254 Operation Modes (Set8254Mode, SetupTimerCounter) */
#define M8254_EVENT_COUNTER 0 /* Event Counter */
#define M8254_HW_ONE_SHOT 1 /* Hardware-Retriggerable One-Shot */
#define M8254_RATE_GENERATOR 2 /* Rate Generator */
#define M8254_SQUARE_WAVE 3 /* Square Wave Mode */
#define M8254_SW_STROBE 4 /* Software Triggered Strobe */
#define M8254_HW_STROBE 5 /* Hardware Triggered Strobe (Retriggerable) */
/* User Timer/Counter 0 Clock Select (SetUtc0Clock) */
#define CUTC0_8MHZ 0x0 /* 8MHz */
#define CUTC0_EXT_TC_CLOCK1 0x1 /* Ext. TC Clock 1 */
#define CUTC0_EXT_TC_CLOCK2 0x2 /* Ext. TC Clock 2 */
#define CUTC0_EXT_PCLK 0x3 /* Ext. Pacer Clock */
/* User Timer/Counter 1 Clock Select (SetUtc1Clock) */
#define CUTC1_8MHZ 0x0 /* 8MHz */
#define CUTC1_EXT_TC_CLOCK1 0x1 /* Ext. TC Clock 1 */
#define CUTC1_EXT_TC_CLOCK2 0x2 /* Ext. TC Clock 2 */
#define CUTC1_EXT_PCLK 0x3 /* Ext. Pacer Clock */
#define CUTC1_UTC0_OUT 0x4 /* User Timer/Counter 0 out */
#define CUTC1_DIN_SIGNAL 0x5 /* High-Speed Digital Input Sampling signal */
/* User Timer/Counter 2 Clock Select (SetUtc2Clock) */
#define CUTC2_8MHZ 0x0 /* 8MHz */
#define CUTC2_EXT_TC_CLOCK1 0x1 /* Ext. TC Clock 1 */
#define CUTC2_EXT_TC_CLOCK2 0x2 /* Ext. TC Clock 2 */
#define CUTC2_EXT_PCLK 0x3 /* Ext. Pacer Clock */
#define CUTC2_UTC1_OUT 0x4 /* User Timer/Counter 1 out */
/* User Timer/Counter 0 Gate Select (SetUtc0Gate) */
#define GUTC0_NOT_GATED 0x0 /* Not gated */
#define GUTC0_GATED 0x1 /* Gated */
#define GUTC0_EXT_TC_GATE1 0x2 /* Ext. TC Gate 1 */
#define GUTC0_EXT_TC_GATE2 0x3 /* Ext. TC Gate 2 */
/* User Timer/Counter 1 Gate Select (SetUtc1Gate) */
#define GUTC1_NOT_GATED 0x0 /* Not gated */
#define GUTC1_GATED 0x1 /* Gated */
#define GUTC1_EXT_TC_GATE1 0x2 /* Ext. TC Gate 1 */
#define GUTC1_EXT_TC_GATE2 0x3 /* Ext. TC Gate 2 */
#define GUTC1_UTC0_OUT 0x4 /* User Timer/Counter 0 out */
/* User Timer/Counter 2 Gate Select (SetUtc2Gate) */
#define GUTC2_NOT_GATED 0x0 /* Not gated */
#define GUTC2_GATED 0x1 /* Gated */
#define GUTC2_EXT_TC_GATE1 0x2 /* Ext. TC Gate 1 */
#define GUTC2_EXT_TC_GATE2 0x3 /* Ext. TC Gate 2 */
#define GUTC2_UTC1_OUT 0x4 /* User Timer/Counter 1 out */
/* Interrupt Source Masks (SetITMask, ClearITMask, GetITStatus) */
#define IRQM_ADC_FIFO_WRITE 0x0001 /* ADC FIFO Write */
#define IRQM_CGT_RESET 0x0002 /* Reset CGT */
#define IRQM_CGT_PAUSE 0x0008 /* Pause CGT */
#define IRQM_ADC_ABOUT_CNT 0x0010 /* About Counter out */
#define IRQM_ADC_DELAY_CNT 0x0020 /* Delay Counter out */
#define IRQM_ADC_SAMPLE_CNT 0x0040 /* ADC Sample Counter */
#define IRQM_DAC1_UCNT 0x0080 /* DAC1 Update Counter */
#define IRQM_DAC2_UCNT 0x0100 /* DAC2 Update Counter */
#define IRQM_UTC1 0x0200 /* User TC1 out */
#define IRQM_UTC1_INV 0x0400 /* User TC1 out, inverted */
#define IRQM_UTC2 0x0800 /* User TC2 out */
#define IRQM_DIGITAL_IT 0x1000 /* Digital Interrupt */
#define IRQM_EXTERNAL_IT 0x2000 /* External Interrupt */
#define IRQM_ETRIG_RISING 0x4000 /* External Trigger rising-edge */
#define IRQM_ETRIG_FALLING 0x8000 /* External Trigger falling-edge */
/* DMA Request Sources (LAS0) */
#define DMAS_DISABLED 0x0 /* DMA Disabled */
#define DMAS_ADC_SCNT 0x1 /* ADC Sample Counter */
#define DMAS_DAC1_UCNT 0x2 /* D/A1 Update Counter */
#define DMAS_DAC2_UCNT 0x3 /* D/A2 Update Counter */
#define DMAS_UTC1 0x4 /* User TC1 out */
#define DMAS_ADFIFO_HALF_FULL 0x8 /* A/D FIFO half full */
#define DMAS_DAC1_FIFO_HALF_EMPTY 0x9 /* D/A1 FIFO half empty */
#define DMAS_DAC2_FIFO_HALF_EMPTY 0xA /* D/A2 FIFO half empty */
/* DMA Local Addresses (0x40000000+LAS1 offset) */
#define DMALADDR_ADC 0x40000000 /* A/D FIFO */
#define DMALADDR_HDIN 0x40000004 /* High Speed Digital Input FIFO */
#define DMALADDR_DAC1 0x40000008 /* D/A1 FIFO */
#define DMALADDR_DAC2 0x4000000C /* D/A2 FIFO */
/* Port 0 compare modes (SetDIO0CompareMode) */
#define DIO_MODE_EVENT 0 /* Event Mode */
#define DIO_MODE_MATCH 1 /* Match Mode */
/* Digital Table Enable (Port 1 disable) */
#define DTBL_DISABLE 0 /* Enable Digital Table */
#define DTBL_ENABLE 1 /* Disable Digital Table */
/* Sampling Signal for High Speed Digital Input (SetHdinStart) */
#define HDIN_SOFTWARE 0x0 /* Software Trigger */
#define HDIN_ADC 0x1 /* A/D Conversion Signal */
#define HDIN_UTC0 0x2 /* User TC out 0 */
#define HDIN_UTC1 0x3 /* User TC out 1 */
#define HDIN_UTC2 0x4 /* User TC out 2 */
#define HDIN_EPCLK 0x5 /* External Pacer Clock */
#define HDIN_ETRG 0x6 /* External Trigger */
/* Channel Gain Table / Channel Gain Latch */
#define CSC_LATCH 0 /* Channel Gain Latch mode */
#define CSC_CGT 1 /* Channel Gain Table mode */
/* Channel Gain Table Pause Enable */
#define CGT_PAUSE_DISABLE 0 /* Channel Gain Table Pause Disable */
#define CGT_PAUSE_ENABLE 1 /* Channel Gain Table Pause Enable */
/* DAC output type/range (p63) */
#define AOUT_UNIP5 0 /* 0..+5 Volt */
#define AOUT_UNIP10 1 /* 0..+10 Volt */
#define AOUT_BIP5 2 /* -5..+5 Volt */
#define AOUT_BIP10 3 /* -10..+10 Volt */
/* Ghannel Gain Table field definitions (p61) */
/* Gain */
#define GAIN1 0
#define GAIN2 1
#define GAIN4 2
#define GAIN8 3
#define GAIN16 4
#define GAIN32 5
#define GAIN64 6
#define GAIN128 7
/* Input range/polarity */
#define AIN_BIP5 0 /* -5..+5 Volt */
#define AIN_BIP10 1 /* -10..+10 Volt */
#define AIN_UNIP10 2 /* 0..+10 Volt */
/* non referenced single ended select bit */
#define NRSE_AGND 0 /* AGND referenced SE input */
#define NRSE_AINS 1 /* AIN SENSE referenced SE input */
/* single ended vs differential */
#define GND_SE 0 /* Single-Ended */
#define GND_DIFF 1 /* Differential */
|
