1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
|
// SPDX-License-Identifier: GPL-2.0+
/*
* FB driver for the S6D1121 LCD Controller
*
* Copyright (C) 2013 Roman Rolinsky
*
* Based on fb_ili9325.c by Noralf Tronnes
* Based on ili9325.c by Jeroen Domburg
* Init code from UTFT library by Henning Karlsen
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio/consumer.h>
#include <linux/delay.h>
#include "fbtft.h"
#define DRVNAME "fb_s6d1121"
#define WIDTH 240
#define HEIGHT 320
#define BPP 16
#define FPS 20
#define DEFAULT_GAMMA "26 09 24 2C 1F 23 24 25 22 26 25 23 0D 00\n" \
"1C 1A 13 1D 0B 11 12 10 13 15 36 19 00 0D"
static int init_display(struct fbtft_par *par)
{
par->fbtftops.reset(par);
if (par->gpio.cs)
gpiod_set_value(par->gpio.cs, 0); /* Activate chip */
/* Initialization sequence from Lib_UTFT */
write_reg(par, 0x0011, 0x2004);
write_reg(par, 0x0013, 0xCC00);
write_reg(par, 0x0015, 0x2600);
write_reg(par, 0x0014, 0x252A);
write_reg(par, 0x0012, 0x0033);
write_reg(par, 0x0013, 0xCC04);
write_reg(par, 0x0013, 0xCC06);
write_reg(par, 0x0013, 0xCC4F);
write_reg(par, 0x0013, 0x674F);
write_reg(par, 0x0011, 0x2003);
write_reg(par, 0x0016, 0x0007);
write_reg(par, 0x0002, 0x0013);
write_reg(par, 0x0003, 0x0003);
write_reg(par, 0x0001, 0x0127);
write_reg(par, 0x0008, 0x0303);
write_reg(par, 0x000A, 0x000B);
write_reg(par, 0x000B, 0x0003);
write_reg(par, 0x000C, 0x0000);
write_reg(par, 0x0041, 0x0000);
write_reg(par, 0x0050, 0x0000);
write_reg(par, 0x0060, 0x0005);
write_reg(par, 0x0070, 0x000B);
write_reg(par, 0x0071, 0x0000);
write_reg(par, 0x0078, 0x0000);
write_reg(par, 0x007A, 0x0000);
write_reg(par, 0x0079, 0x0007);
write_reg(par, 0x0007, 0x0051);
write_reg(par, 0x0007, 0x0053);
write_reg(par, 0x0079, 0x0000);
write_reg(par, 0x0022); /* Write Data to GRAM */
return 0;
}
static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
{
switch (par->info->var.rotate) {
/* R20h = Horizontal GRAM Start Address */
/* R21h = Vertical GRAM Start Address */
case 0:
write_reg(par, 0x0020, xs);
write_reg(par, 0x0021, ys);
break;
case 180:
write_reg(par, 0x0020, WIDTH - 1 - xs);
write_reg(par, 0x0021, HEIGHT - 1 - ys);
break;
case 270:
write_reg(par, 0x0020, WIDTH - 1 - ys);
write_reg(par, 0x0021, xs);
break;
case 90:
write_reg(par, 0x0020, ys);
write_reg(par, 0x0021, HEIGHT - 1 - xs);
break;
}
write_reg(par, 0x0022); /* Write Data to GRAM */
}
static int set_var(struct fbtft_par *par)
{
switch (par->info->var.rotate) {
/* AM: GRAM update direction */
case 0:
write_reg(par, 0x03, 0x0003 | (par->bgr << 12));
break;
case 180:
write_reg(par, 0x03, 0x0000 | (par->bgr << 12));
break;
case 270:
write_reg(par, 0x03, 0x000A | (par->bgr << 12));
break;
case 90:
write_reg(par, 0x03, 0x0009 | (par->bgr << 12));
break;
}
return 0;
}
/*
* Gamma string format:
* PKP0 PKP1 PKP2 PKP3 PKP4 PKP5 PKP6 PKP7 PKP8 PKP9 PKP10 PKP11 VRP0 VRP1
* PKN0 PKN1 PKN2 PKN3 PKN4 PKN5 PKN6 PKN7 PRN8 PRN9 PRN10 PRN11 VRN0 VRN1
*/
#define CURVE(num, idx) curves[(num) * par->gamma.num_values + (idx)]
static int set_gamma(struct fbtft_par *par, u32 *curves)
{
unsigned long mask[] = {
0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f,
0x3f, 0x3f, 0x1f, 0x1f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f,
0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x1f, 0x1f,
};
int i, j;
/* apply mask */
for (i = 0; i < 2; i++)
for (j = 0; j < 14; j++)
CURVE(i, j) &= mask[i * par->gamma.num_values + j];
write_reg(par, 0x0030, CURVE(0, 1) << 8 | CURVE(0, 0));
write_reg(par, 0x0031, CURVE(0, 3) << 8 | CURVE(0, 2));
write_reg(par, 0x0032, CURVE(0, 5) << 8 | CURVE(0, 3));
write_reg(par, 0x0033, CURVE(0, 7) << 8 | CURVE(0, 6));
write_reg(par, 0x0034, CURVE(0, 9) << 8 | CURVE(0, 8));
write_reg(par, 0x0035, CURVE(0, 11) << 8 | CURVE(0, 10));
write_reg(par, 0x0036, CURVE(1, 1) << 8 | CURVE(1, 0));
write_reg(par, 0x0037, CURVE(1, 3) << 8 | CURVE(1, 2));
write_reg(par, 0x0038, CURVE(1, 5) << 8 | CURVE(1, 4));
write_reg(par, 0x0039, CURVE(1, 7) << 8 | CURVE(1, 6));
write_reg(par, 0x003A, CURVE(1, 9) << 8 | CURVE(1, 8));
write_reg(par, 0x003B, CURVE(1, 11) << 8 | CURVE(1, 10));
write_reg(par, 0x003C, CURVE(0, 13) << 8 | CURVE(0, 12));
write_reg(par, 0x003D, CURVE(1, 13) << 8 | CURVE(1, 12));
return 0;
}
#undef CURVE
static struct fbtft_display display = {
.regwidth = 16,
.width = WIDTH,
.height = HEIGHT,
.bpp = BPP,
.fps = FPS,
.gamma_num = 2,
.gamma_len = 14,
.gamma = DEFAULT_GAMMA,
.fbtftops = {
.init_display = init_display,
.set_addr_win = set_addr_win,
.set_var = set_var,
.set_gamma = set_gamma,
},
};
FBTFT_REGISTER_DRIVER(DRVNAME, "samsung,s6d1121", &display);
MODULE_ALIAS("spi:" DRVNAME);
MODULE_ALIAS("platform:" DRVNAME);
MODULE_ALIAS("spi:s6d1121");
MODULE_ALIAS("platform:s6d1121");
MODULE_DESCRIPTION("FB driver for the S6D1121 LCD Controller");
MODULE_AUTHOR("Roman Rolinsky");
MODULE_LICENSE("GPL");
|
