1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
|
/*
* FB driver for the SSD1325 OLED Controller
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include "fbtft.h"
#define DRVNAME "fb_ssd1325"
#define WIDTH 128
#define HEIGHT 64
#define GAMMA_NUM 1
#define GAMMA_LEN 15
#define DEFAULT_GAMMA "7 1 1 1 1 2 2 3 3 4 4 5 5 6 6"
/*
* write_reg() caveat:
*
* This doesn't work because D/C has to be LOW for both values:
* write_reg(par, val1, val2);
*
* Do it like this:
* write_reg(par, val1);
* write_reg(par, val2);
*/
/* Init sequence taken from the Adafruit SSD1306 Arduino library */
static int init_display(struct fbtft_par *par)
{
par->fbtftops.reset(par);
gpio_set_value(par->gpio.cs, 0);
write_reg(par, 0xb3);
write_reg(par, 0xf0);
write_reg(par, 0xae);
write_reg(par, 0xa1);
write_reg(par, 0x00);
write_reg(par, 0xa8);
write_reg(par, 0x3f);
write_reg(par, 0xa0);
write_reg(par, 0x45);
write_reg(par, 0xa2);
write_reg(par, 0x40);
write_reg(par, 0x75);
write_reg(par, 0x00);
write_reg(par, 0x3f);
write_reg(par, 0x15);
write_reg(par, 0x00);
write_reg(par, 0x7f);
write_reg(par, 0xa4);
write_reg(par, 0xaf);
return 0;
}
static uint8_t rgb565_to_g16(u16 pixel)
{
u16 b = pixel & 0x1f;
u16 g = (pixel & (0x3f << 5)) >> 5;
u16 r = (pixel & (0x1f << (5 + 6))) >> (5 + 6);
pixel = (299 * r + 587 * g + 114 * b) / 195;
if (pixel > 255)
pixel = 255;
return (uint8_t)pixel / 16;
}
static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
{
fbtft_par_dbg(DEBUG_SET_ADDR_WIN, par,
"%s(xs=%d, ys=%d, xe=%d, ye=%d)\n", __func__, xs, ys, xe,
ye);
write_reg(par, 0x75);
write_reg(par, 0x00);
write_reg(par, 0x3f);
write_reg(par, 0x15);
write_reg(par, 0x00);
write_reg(par, 0x7f);
}
static int blank(struct fbtft_par *par, bool on)
{
fbtft_par_dbg(DEBUG_BLANK, par, "%s(blank=%s)\n",
__func__, on ? "true" : "false");
if (on)
write_reg(par, 0xAE);
else
write_reg(par, 0xAF);
return 0;
}
/*
* Grayscale Lookup Table
* GS1 - GS15
* The "Gamma curve" contains the relative values between the entries
* in the Lookup table.
*
* 0 = Setting of GS1 < Setting of GS2 < Setting of GS3.....<
* Setting of GS14 < Setting of GS15
*/
static int set_gamma(struct fbtft_par *par, unsigned long *curves)
{
int i;
fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "%s()\n", __func__);
for (i = 0; i < GAMMA_LEN; i++) {
if (i > 0 && curves[i] < 1) {
dev_err(par->info->device,
"Illegal value in Grayscale Lookup Table at index %d.\n"
"Must be greater than 0\n", i);
return -EINVAL;
}
if (curves[i] > 7) {
dev_err(par->info->device,
"Illegal value(s) in Grayscale Lookup Table.\n"
"At index=%d, the accumulated value has exceeded 7\n",
i);
return -EINVAL;
}
}
write_reg(par, 0xB8);
for (i = 0; i < 8; i++)
write_reg(par, (curves[i] & 0xFF));
return 0;
}
static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
{
u16 *vmem16 = (u16 *)par->info->screen_buffer;
u8 *buf = par->txbuf.buf;
u8 n1;
u8 n2;
int y, x;
int ret;
for (x = 0; x < par->info->var.xres; x++) {
if (x % 2)
continue;
for (y = 0; y < par->info->var.yres; y++) {
n1 = rgb565_to_g16(vmem16[y * par->info->var.xres + x]);
n2 = rgb565_to_g16(vmem16
[y * par->info->var.xres + x + 1]);
*buf = (n1 << 4) | n2;
buf++;
}
}
gpio_set_value(par->gpio.dc, 1);
/* Write data */
ret = par->fbtftops.write(par, par->txbuf.buf,
par->info->var.xres * par->info->var.yres / 2);
if (ret < 0)
dev_err(par->info->device,
"%s: write failed and returned: %d\n", __func__, ret);
return ret;
}
static struct fbtft_display display = {
.regwidth = 8,
.width = WIDTH,
.height = HEIGHT,
.txbuflen = WIDTH * HEIGHT / 2,
.gamma_num = GAMMA_NUM,
.gamma_len = GAMMA_LEN,
.gamma = DEFAULT_GAMMA,
.fbtftops = {
.write_vmem = write_vmem,
.init_display = init_display,
.set_addr_win = set_addr_win,
.blank = blank,
.set_gamma = set_gamma,
},
};
FBTFT_REGISTER_DRIVER(DRVNAME, "solomon,ssd1325", &display);
MODULE_ALIAS("spi:" DRVNAME);
MODULE_ALIAS("platform:" DRVNAME);
MODULE_ALIAS("spi:ssd1325");
MODULE_ALIAS("platform:ssd1325");
MODULE_DESCRIPTION("SSD1325 OLED Driver");
MODULE_AUTHOR("Alexey Mednyy");
MODULE_LICENSE("GPL");
|
