1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
|
/*
* ADIS16209 Programmable Digital Vibration Sensor driver
*
* Copyright 2010 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>
#include <linux/iio/imu/adis.h>
#include "adis16209.h"
static const u8 adis16209_addresses[8][1] = {
[ADIS16209_SCAN_SUPPLY] = { },
[ADIS16209_SCAN_AUX_ADC] = { },
[ADIS16209_SCAN_ACC_X] = { ADIS16209_XACCL_NULL },
[ADIS16209_SCAN_ACC_Y] = { ADIS16209_YACCL_NULL },
[ADIS16209_SCAN_INCLI_X] = { ADIS16209_XINCL_NULL },
[ADIS16209_SCAN_INCLI_Y] = { ADIS16209_YINCL_NULL },
[ADIS16209_SCAN_ROT] = { },
[ADIS16209_SCAN_TEMP] = { },
};
static int adis16209_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val,
int val2,
long mask)
{
struct adis *st = iio_priv(indio_dev);
int bits;
s16 val16;
u8 addr;
switch (mask) {
case IIO_CHAN_INFO_CALIBBIAS:
switch (chan->type) {
case IIO_ACCEL:
case IIO_INCLI:
bits = 14;
break;
default:
return -EINVAL;
}
val16 = val & ((1 << bits) - 1);
addr = adis16209_addresses[chan->scan_index][0];
return adis_write_reg_16(st, addr, val16);
}
return -EINVAL;
}
static int adis16209_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2,
long mask)
{
struct adis *st = iio_priv(indio_dev);
int ret;
int bits;
u8 addr;
s16 val16;
switch (mask) {
case IIO_CHAN_INFO_RAW:
return adis_single_conversion(indio_dev, chan,
ADIS16209_ERROR_ACTIVE, val);
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_VOLTAGE:
*val = 0;
if (chan->channel == 0)
*val2 = 305180; /* 0.30518 mV */
else
*val2 = 610500; /* 0.6105 mV */
return IIO_VAL_INT_PLUS_MICRO;
case IIO_TEMP:
*val = -470; /* -0.47 C */
*val2 = 0;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_ACCEL:
*val = 0;
*val2 = IIO_G_TO_M_S_2(244140); /* 0.244140 mg */
return IIO_VAL_INT_PLUS_NANO;
case IIO_INCLI:
case IIO_ROT:
*val = 0;
*val2 = 25000; /* 0.025 degree */
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
break;
case IIO_CHAN_INFO_OFFSET:
*val = 25000 / -470 - 0x4FE; /* 25 C = 0x4FE */
return IIO_VAL_INT;
case IIO_CHAN_INFO_CALIBBIAS:
switch (chan->type) {
case IIO_ACCEL:
bits = 14;
break;
default:
return -EINVAL;
}
mutex_lock(&indio_dev->mlock);
addr = adis16209_addresses[chan->scan_index][0];
ret = adis_read_reg_16(st, addr, &val16);
if (ret) {
mutex_unlock(&indio_dev->mlock);
return ret;
}
val16 &= (1 << bits) - 1;
val16 = (s16)(val16 << (16 - bits)) >> (16 - bits);
*val = val16;
mutex_unlock(&indio_dev->mlock);
return IIO_VAL_INT;
}
return -EINVAL;
}
static const struct iio_chan_spec adis16209_channels[] = {
ADIS_SUPPLY_CHAN(ADIS16209_SUPPLY_OUT, ADIS16209_SCAN_SUPPLY, 0, 14),
ADIS_TEMP_CHAN(ADIS16209_TEMP_OUT, ADIS16209_SCAN_TEMP, 0, 12),
ADIS_ACCEL_CHAN(X, ADIS16209_XACCL_OUT, ADIS16209_SCAN_ACC_X,
BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
ADIS_ACCEL_CHAN(Y, ADIS16209_YACCL_OUT, ADIS16209_SCAN_ACC_Y,
BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
ADIS_AUX_ADC_CHAN(ADIS16209_AUX_ADC, ADIS16209_SCAN_AUX_ADC, 0, 12),
ADIS_INCLI_CHAN(X, ADIS16209_XINCL_OUT, ADIS16209_SCAN_INCLI_X,
0, 0, 14),
ADIS_INCLI_CHAN(Y, ADIS16209_YINCL_OUT, ADIS16209_SCAN_INCLI_Y,
0, 0, 14),
ADIS_ROT_CHAN(X, ADIS16209_ROT_OUT, ADIS16209_SCAN_ROT, 0, 0, 14),
IIO_CHAN_SOFT_TIMESTAMP(8)
};
static const struct iio_info adis16209_info = {
.read_raw = &adis16209_read_raw,
.write_raw = &adis16209_write_raw,
.update_scan_mode = adis_update_scan_mode,
.driver_module = THIS_MODULE,
};
static const char * const adis16209_status_error_msgs[] = {
[ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT] = "Self test failure",
[ADIS16209_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
[ADIS16209_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
[ADIS16209_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
[ADIS16209_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
};
static const struct adis_data adis16209_data = {
.read_delay = 30,
.msc_ctrl_reg = ADIS16209_MSC_CTRL,
.glob_cmd_reg = ADIS16209_GLOB_CMD,
.diag_stat_reg = ADIS16209_DIAG_STAT,
.self_test_mask = ADIS16209_MSC_CTRL_SELF_TEST_EN,
.startup_delay = ADIS16209_STARTUP_DELAY,
.status_error_msgs = adis16209_status_error_msgs,
.status_error_mask = BIT(ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT) |
BIT(ADIS16209_DIAG_STAT_SPI_FAIL_BIT) |
BIT(ADIS16209_DIAG_STAT_FLASH_UPT_BIT) |
BIT(ADIS16209_DIAG_STAT_POWER_HIGH_BIT) |
BIT(ADIS16209_DIAG_STAT_POWER_LOW_BIT),
};
static int adis16209_probe(struct spi_device *spi)
{
int ret;
struct adis *st;
struct iio_dev *indio_dev;
/* setup the industrialio driver allocated elements */
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;
st = iio_priv(indio_dev);
/* this is only used for removal purposes */
spi_set_drvdata(spi, indio_dev);
indio_dev->name = spi->dev.driver->name;
indio_dev->dev.parent = &spi->dev;
indio_dev->info = &adis16209_info;
indio_dev->channels = adis16209_channels;
indio_dev->num_channels = ARRAY_SIZE(adis16209_channels);
indio_dev->modes = INDIO_DIRECT_MODE;
ret = adis_init(st, indio_dev, spi, &adis16209_data);
if (ret)
return ret;
ret = adis_setup_buffer_and_trigger(st, indio_dev, NULL);
if (ret)
return ret;
/* Get the device into a sane initial state */
ret = adis_initial_startup(st);
if (ret)
goto error_cleanup_buffer_trigger;
ret = iio_device_register(indio_dev);
if (ret)
goto error_cleanup_buffer_trigger;
return 0;
error_cleanup_buffer_trigger:
adis_cleanup_buffer_and_trigger(st, indio_dev);
return ret;
}
static int adis16209_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
struct adis *st = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
adis_cleanup_buffer_and_trigger(st, indio_dev);
return 0;
}
static struct spi_driver adis16209_driver = {
.driver = {
.name = "adis16209",
.owner = THIS_MODULE,
},
.probe = adis16209_probe,
.remove = adis16209_remove,
};
module_spi_driver(adis16209_driver);
MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
MODULE_DESCRIPTION("Analog Devices ADIS16209 Digital Vibration Sensor driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("spi:adis16209");
|
