aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/ucc_uart.c
blob: 7355303dad9968082da43b8b84fc3f745dda11a6 (plain) (blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
/*
 * Freescale QUICC Engine UART device driver
 *
 * Author: Timur Tabi <timur@freescale.com>
 *
 * Copyright 2007 Freescale Semiconductor, Inc.  This file is licensed under
 * the terms of the GNU General Public License version 2.  This program
 * is licensed "as is" without any warranty of any kind, whether express
 * or implied.
 *
 * This driver adds support for UART devices via Freescale's QUICC Engine
 * found on some Freescale SOCs.
 *
 * If Soft-UART support is needed but not already present, then this driver
 * will request and upload the "Soft-UART" microcode upon probe.  The
 * filename of the microcode should be fsl_qe_ucode_uart_X_YZ.bin, where "X"
 * is the name of the SOC (e.g. 8323), and YZ is the revision of the SOC,
 * (e.g. "11" for 1.1).
 */

#include <linux/module.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/io.h>
#include <linux/of_platform.h>
#include <linux/dma-mapping.h>

#include <linux/fs_uart_pd.h>
#include <asm/ucc_slow.h>

#include <linux/firmware.h>
#include <asm/reg.h>

/*
 * The GUMR flag for Soft UART.  This would normally be defined in qe.h,
 * but Soft-UART is a hack and we want to keep everything related to it in
 * this file.
 */
#define UCC_SLOW_GUMR_H_SUART   	0x00004000      /* Soft-UART */

/*
 * soft_uart is 1 if we need to use Soft-UART mode
 */
static int soft_uart;
/*
 * firmware_loaded is 1 if the firmware has been loaded, 0 otherwise.
 */
static int firmware_loaded;

/* Enable this macro to configure all serial ports in internal loopback
   mode */
/* #define LOOPBACK */

/* The major and minor device numbers are defined in
 * http://www.lanana.org/docs/device-list/devices-2.6+.txt.  For the QE
 * UART, we have major number 204 and minor numbers 46 - 49, which are the
 * same as for the CPM2.  This decision was made because no Freescale part
 * has both a CPM and a QE.
 */
#define SERIAL_QE_MAJOR 204
#define SERIAL_QE_MINOR 46

/* Since we only have minor numbers 46 - 49, there is a hard limit of 4 ports */
#define UCC_MAX_UART    4

/* The number of buffer descriptors for receiving characters. */
#define RX_NUM_FIFO     4

/* The number of buffer descriptors for transmitting characters. */
#define TX_NUM_FIFO     4

/* The maximum size of the character buffer for a single RX BD. */
#define RX_BUF_SIZE     32

/* The maximum size of the character buffer for a single TX BD. */
#define TX_BUF_SIZE     32

/*
 * The number of jiffies to wait after receiving a close command before the
 * device is actually closed.  This allows the last few characters to be
 * sent over the wire.
 */
#define UCC_WAIT_CLOSING 100

struct ucc_uart_pram {
	struct ucc_slow_pram common;
	u8 res1[8];     	/* reserved */
	__be16 maxidl;  	/* Maximum idle chars */
	__be16 idlc;    	/* temp idle counter */
	__be16 brkcr;   	/* Break count register */
	__be16 parec;   	/* receive parity error counter */
	__be16 frmec;   	/* receive framing error counter */
	__be16 nosec;   	/* receive noise counter */
	__be16 brkec;   	/* receive break condition counter */
	__be16 brkln;   	/* last received break length */
	__be16 uaddr[2];	/* UART address character 1 & 2 */
	__be16 rtemp;   	/* Temp storage */
	__be16 toseq;   	/* Transmit out of sequence char */
	__be16 cchars[8];       /* control characters 1-8 */
	__be16 rccm;    	/* receive control character mask */
	__be16 rccr;    	/* receive control character register */
	__be16 rlbc;    	/* receive last break character */
	__be16 res2;    	/* reserved */
	__be32 res3;    	/* reserved, should be cleared */
	u8 res4;		/* reserved, should be cleared */
	u8 res5[3];     	/* reserved, should be cleared */
	__be32 res6;    	/* reserved, should be cleared */
	__be32 res7;    	/* reserved, should be cleared */
	__be32 res8;    	/* reserved, should be cleared */
	__be32 res9;    	/* reserved, should be cleared */
	__be32 res10;   	/* reserved, should be cleared */
	__be32 res11;   	/* reserved, should be cleared */
	__be32 res12;   	/* reserved, should be cleared */
	__be32 res13;   	/* reserved, should be cleared */
/* The rest is for Soft-UART only */
	__be16 supsmr;  	/* 0x90, Shadow UPSMR */
	__be16 res92;   	/* 0x92, reserved, initialize to 0 */
	__be32 rx_state;	/* 0x94, RX state, initialize to 0 */
	__be32 rx_cnt;  	/* 0x98, RX count, initialize to 0 */
	u8 rx_length;   	/* 0x9C, Char length, set to 1+CL+PEN+1+SL */
	u8 rx_bitmark;  	/* 0x9D, reserved, initialize to 0 */
	u8 rx_temp_dlst_qe;     /* 0x9E, reserved, initialize to 0 */
	u8 res14[0xBC - 0x9F];  /* reserved */
	__be32 dump_ptr;	/* 0xBC, Dump pointer */
	__be32 rx_frame_rem;    /* 0xC0, reserved, initialize to 0 */
	u8 rx_frame_rem_size;   /* 0xC4, reserved, initialize to 0 */
	u8 tx_mode;     	/* 0xC5, mode, 0=AHDLC, 1=UART */
	__be16 tx_state;	/* 0xC6, TX state */
	u8 res15[0xD0 - 0xC8];  /* reserved */
	__be32 resD0;   	/* 0xD0, reserved, initialize to 0 */
	u8 resD4;       	/* 0xD4, reserved, initialize to 0 */
	__be16 resD5;   	/* 0xD5, reserved, initialize to 0 */
} __attribute__ ((packed));

/* SUPSMR definitions, for Soft-UART only */
#define UCC_UART_SUPSMR_SL      	0x8000
#define UCC_UART_SUPSMR_RPM_MASK	0x6000
#define UCC_UART_SUPSMR_RPM_ODD 	0x0000
#define UCC_UART_SUPSMR_RPM_LOW 	0x2000
#define UCC_UART_SUPSMR_RPM_EVEN	0x4000
#define UCC_UART_SUPSMR_RPM_HIGH	0x6000
#define UCC_UART_SUPSMR_PEN     	0x1000
#define UCC_UART_SUPSMR_TPM_MASK	0x0C00
#define UCC_UART_SUPSMR_TPM_ODD 	0x0000
#define UCC_UART_SUPSMR_TPM_LOW 	0x0400
#define UCC_UART_SUPSMR_TPM_EVEN	0x0800
#define UCC_UART_SUPSMR_TPM_HIGH	0x0C00
#define UCC_UART_SUPSMR_FRZ     	0x0100
#define UCC_UART_SUPSMR_UM_MASK 	0x00c0
#define UCC_UART_SUPSMR_UM_NORMAL       0x0000
#define UCC_UART_SUPSMR_UM_MAN_MULTI    0x0040
#define UCC_UART_SUPSMR_UM_AUTO_MULTI   0x00c0
#define UCC_UART_SUPSMR_CL_MASK 	0x0030
#define UCC_UART_SUPSMR_CL_8    	0x0030
#define UCC_UART_SUPSMR_CL_7    	0x0020
#define UCC_UART_SUPSMR_CL_6    	0x0010
#define UCC_UART_SUPSMR_CL_5    	0x0000

#define UCC_UART_TX_STATE_AHDLC 	0x00
#define UCC_UART_TX_STATE_UART  	0x01
#define UCC_UART_TX_STATE_X1    	0x00
#define UCC_UART_TX_STATE_X16   	0x80

#define UCC_UART_PRAM_ALIGNMENT 0x100

#define UCC_UART_SIZE_OF_BD     UCC_SLOW_SIZE_OF_BD
#define NUM_CONTROL_CHARS       8

/* Private per-port data structure */
struct uart_qe_port {
	struct uart_port port;
	struct ucc_slow __iomem *uccp;
	struct ucc_uart_pram __iomem *uccup;
	struct ucc_slow_info us_info;
	struct ucc_slow_private *us_private;
	struct device_node *np;
	unsigned int ucc_num;   /* First ucc is 0, not 1 */

	u16 rx_nrfifos;
	u16 rx_fifosize;
	u16 tx_nrfifos;
	u16 tx_fifosize;
	int wait_closing;
	u32 flags;
	struct qe_bd *rx_bd_base;
	struct qe_bd *rx_cur;
	struct qe_bd *tx_bd_base;
	struct qe_bd *tx_cur;
	unsigned char *tx_buf;
	unsigned char *rx_buf;
	void *bd_virt;  	/* virtual address of the BD buffers */
	dma_addr_t bd_dma_addr; /* bus address of the BD buffers */
	unsigned int bd_size;   /* size of BD buffer space */
};

static struct uart_driver ucc_uart_driver = {
	.owner  	= THIS_MODULE,
	.driver_name    = "ucc_uart",
	.dev_name       = "ttyQE",
	.major  	= SERIAL_QE_MAJOR,
	.minor  	= SERIAL_QE_MINOR,
	.nr     	= UCC_MAX_UART,
};

/*
 * Virtual to physical address translation.
 *
 * Given the virtual address for a character buffer, this function returns
 * the physical (DMA) equivalent.
 */
static inline dma_addr_t cpu2qe_addr(void *addr, struct uart_qe_port *qe_port)
{
	if (likely((addr >= qe_port->bd_virt)) &&
	    (addr < (qe_port->bd_virt + qe_port->bd_size)))
		return qe_port->bd_dma_addr + (addr - qe_port->bd_virt);

	/* something nasty happened */
	printk(KERN_ERR "%s: addr=%p\n", __func__, addr);
	BUG();
	return 0;
}

/*
 * Physical to virtual address translation.
 *
 * Given the physical (DMA) address for a character buffer, this function
 * returns the virtual equivalent.
 */
static inline void *qe2cpu_addr(dma_addr_t addr, struct uart_qe_port *qe_port)
{
	/* sanity check */
	if (likely((addr >= qe_port->bd_dma_addr) &&
		   (addr < (qe_port->bd_dma_addr + qe_port->bd_size))))
		return qe_port->bd_virt + (addr - qe_port->bd_dma_addr);

	/* something nasty happened */
	printk(KERN_ERR "%s: addr=%llx\n", __func__, (u64)addr);
	BUG();
	return NULL;
}

/*
 * Return 1 if the QE is done transmitting all buffers for this port
 *
 * This function scans each BD in sequence.  If we find a BD that is not
 * ready (READY=1), then we return 0 indicating that the QE is still sending
 * data.  If we reach the last BD (WRAP=1), then we know we've scanned
 * the entire list, and all BDs are done.
 */
static unsigned int qe_uart_tx_empty(struct uart_port *port)
{
	struct uart_qe_port *qe_port =
		container_of(port, struct uart_qe_port, port);
	struct qe_bd *bdp = qe_port->tx_bd_base;

	while (1) {
		if (in_be16(&bdp->status) & BD_SC_READY)
			/* This BD is not done, so return "not done" */
			return 0;

		if (in_be16(&bdp->status) & BD_SC_WRAP)
			/*
			 * This BD is done and it's the last one, so return
			 * "done"
			 */
			return 1;

		bdp++;
	};
}

/*
 * Set the modem control lines
 *
 * Although the QE can control the modem control lines (e.g. CTS), we
 * don't need that support. This function must exist, however, otherwise
 * the kernel will panic.
 */
void qe_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
}

/*
 * Get the current modem control line status
 *
 * Although the QE can control the modem control lines (e.g. CTS), this
 * driver currently doesn't support that, so we always return Carrier
 * Detect, Data Set Ready, and Clear To Send.
 */
static unsigned int qe_uart_get_mctrl(struct uart_port *port)
{
	return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
}

/*
 * Disable the transmit interrupt.
 *
 * Although this function is called "stop_tx", it does not actually stop
 * transmission of data.  Instead, it tells the QE to not generate an
 * interrupt when the UCC is finished sending characters.
 */
static void qe_uart_stop_tx(struct uart_port *port)
{
	struct uart_qe_port *qe_port =
		container_of(port, struct uart_qe_port, port);

	clrbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX);
}

/*
 * Transmit as many characters to the HW as possible.
 *
 * This function will attempt to stuff of all the characters from the
 * kernel's transmit buffer into TX BDs.
 *
 * A return value of non-zero indicates that it successfully stuffed all
 * characters from the kernel buffer.
 *
 * A return value of zero indicates that there are still characters in the
 * kernel's buffer that have not been transmitted, but there are no more BDs
 * available.  This function should be called again after a BD has been made
 * available.
 */
static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
{
	struct qe_bd *bdp;
	unsigned char *p;
	unsigned int count;
	struct uart_port *port = &qe_port->port;
	struct circ_buf *xmit = &port->state->xmit;

	bdp = qe_port->rx_cur;

	/* Handle xon/xoff */
	if (port->x_char) {
		/* Pick next descriptor and fill from buffer */
		bdp = qe_port->tx_cur;

		p = qe2cpu_addr(bdp->buf, qe_port);

		*p++ = port->x_char;
		out_be16(&bdp->length, 1);
		setbits16(&bdp->status, BD_SC_READY);
		/* Get next BD. */
		if (in_be16(&bdp->status) & BD_SC_WRAP)
			bdp = qe_port->tx_bd_base;
		else
			bdp++;
		qe_port->tx_cur = bdp;

		port->icount.tx++;
		port->x_char = 0;
		return 1;
	}

	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
		qe_uart_stop_tx(port);
		return 0;
	}

	/* Pick next descriptor and fill from buffer */
	bdp = qe_port->tx_cur;

	while (!(in_be16(&bdp->status) & BD_SC_READY) &&
	       (xmit->tail != xmit->head)) {
		count = 0;
		p = qe2cpu_addr(bdp->buf, qe_port);
		while (count < qe_port->tx_fifosize) {
			*p++ = xmit->buf[xmit->tail];
			xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
			port->icount.tx++;
			count++;
			if (xmit->head == xmit->tail)
				break;
		}

		out_be16(&bdp->length, count);
		setbits16(&bdp->status, BD_SC_READY);

		/* Get next BD. */
		if (in_be16(&bdp->status) & BD_SC_WRAP)
			bdp = qe_port->tx_bd_base;
		else
			bdp++;
	}
	qe_port->tx_cur = bdp;

	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
		uart_write_wakeup(port);

	if (uart_circ_empty(xmit)) {
		/* The kernel buffer is empty, so turn off TX interrupts.  We
		   don't need to be told when the QE is finished transmitting
		   the data. */
		qe_uart_stop_tx(port);
		return 0;
	}

	return 1;
}

/*
 * Start transmitting data
 *
 * This function will start transmitting any available data, if the port
 * isn't already transmitting data.
 */
static void qe_uart_start_tx(struct uart_port *port)
{
	struct uart_qe_port *qe_port =
		container_of(port, struct uart_qe_port, port);

	/* If we currently are transmitting, then just return */
	if (in_be16(&qe_port->uccp->uccm) & UCC_UART_UCCE_TX)
		return;

	/* Otherwise, pump the port and start transmission */
	if (qe_uart_tx_pump(qe_port))
		setbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX);
}

/*
 * Stop transmitting data
 */
static void qe_uart_stop_rx(struct uart_port *port)
{
	struct uart_qe_port *qe_port =
		container_of(port, struct uart_qe_port, port);

	clrbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX);
}

/*
 * Enable status change interrupts
 *
 * We don't support status change interrupts, but we need to define this
 * function otherwise the kernel will panic.
 */
static void qe_uart_enable_ms(struct uart_port *port)
{
}

/* Start or stop sending  break signal
 *
 * This function controls the sending of a break signal.  If break_state=1,
 * then we start sending a break signal.  If break_state=0, then we stop
 * sending the break signal.
 */
static void qe_uart_break_ctl(struct uart_port *port, int break_state)
{
	struct uart_qe_port *qe_port =
		container_of(port, struct uart_qe_port, port);

	if (break_state)
		ucc_slow_stop_tx(qe_port->us_private);
	else
		ucc_slow_restart_tx(qe_port->us_private);
}

/* ISR helper function for receiving character.
 *
 * This function is called by the ISR to handling receiving characters
 */
static void qe_uart_int_rx(struct uart_qe_port *qe_port)
{
	int i;
	unsigned char ch, *cp;
	struct uart_port *port = &qe_port->port;
	struct tty_port *tport = &port->state->port;
	struct qe_bd *bdp;
	u16 status;
	unsigned int flg;

	/* Just loop through the closed BDs and copy the characters into
	 * the buffer.
	 */
	bdp = qe_port->rx_cur;
	while (1) {
		status = in_be16(&bdp->status);

		/* If this one is empty, then we assume we've read them all */
		if (status & BD_SC_EMPTY)
			break;

		/* get number of characters, and check space in RX buffer */
		i = in_be16(&bdp->length);

		/* If we don't have enough room in RX buffer for the entire BD,
		 * then we try later, which will be the next RX interrupt.
		 */
		if (tty_buffer_request_room(tport, i) < i) {
			dev_dbg(port->dev, "ucc-uart: no room in RX buffer\n");
			return;
		}

		/* get pointer */
		cp = qe2cpu_addr(bdp->buf, qe_port);

		/* loop through the buffer */
		while (i-- > 0) {
			ch = *cp++;
			port->icount.rx++;
			flg = TTY_NORMAL;

			if (!i && status &
			    (BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV))
				goto handle_error;
			if (uart_handle_sysrq_char(port, ch))
				continue;

error_return:
			tty_insert_flip_char(tport, ch, flg);

		}

		/* This BD is ready to be used again. Clear status. get next */
		clrsetbits_be16(&bdp->status, BD_SC_BR | BD_SC_FR | BD_SC_PR |
			BD_SC_OV | BD_SC_ID, BD_SC_EMPTY);
		if (in_be16(&bdp->status) & BD_SC_WRAP)
			bdp = qe_port->rx_bd_base;
		else
			bdp++;

	}

	/* Write back buffer pointer */
	qe_port->rx_cur = bdp;

	/* Activate BH processing */
	tty_flip_buffer_push(tport);

	return;

	/* Error processing */

handle_error:
	/* Statistics */
	if (status & BD_SC_BR)
		port->icount.brk++;
	if (status & BD_SC_PR)
		port->icount.parity++;
	if (status & BD_SC_FR)
		port->icount.frame++;
	if (status & BD_SC_OV)
		port->icount.overrun++;

	/* Mask out ignored conditions */
	status &= port->read_status_mask;

	/* Handle the remaining ones */
	if (status & BD_SC_BR)
		flg = TTY_BREAK;
	else if (status & BD_SC_PR)
		flg = TTY_PARITY;
	else if (status & BD_SC_FR)
		flg = TTY_FRAME;

	/* Overrun does not affect the current character ! */
	if (status & BD_SC_OV)
		tty_insert_flip_char(tport, 0, TTY_OVERRUN);
#ifdef SUPPORT_SYSRQ
	port->sysrq = 0;
#endif
	goto error_return;
}

/* Interrupt handler
 *
 * This interrupt handler is called after a BD is processed.
 */
static irqreturn_t qe_uart_int(int irq, void *data)
{
	struct uart_qe_port *qe_port = (struct uart_qe_port *) data;
	struct ucc_slow __iomem *uccp = qe_port->uccp;
	u16 events;

	/* Clear the interrupts */
	events = in_be16(&uccp->ucce);
	out_be16(&uccp->ucce, events);

	if (events & UCC_UART_UCCE_BRKE)
		uart_handle_break(&qe_port->port);

	if (events & UCC_UART_UCCE_RX)
		qe_uart_int_rx(qe_port);

	if (events & UCC_UART_UCCE_TX)
		qe_uart_tx_pump(qe_port);

	return events ? IRQ_HANDLED : IRQ_NONE;
}

/* Initialize buffer descriptors
 *
 * This function initializes all of the RX and TX buffer descriptors.
 */
static void qe_uart_initbd(struct uart_qe_port *qe_port)
{
	int i;
	void *bd_virt;
	struct qe_bd *bdp;

	/* Set the physical address of the host memory buffers in the buffer
	 * descriptors, and the virtual address for us to work with.
	 */
	bd_virt = qe_port->bd_virt;
	bdp = qe_port->rx_bd_base;
	qe_port->rx_cur = qe_port->rx_bd_base;
	for (i = 0; i < (qe_port->rx_nrfifos - 1); i++) {
		out_be16(&bdp->status, BD_SC_EMPTY | BD_SC_INTRPT);
		out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
		out_be16(&bdp->length, 0);
		bd_virt += qe_port->rx_fifosize;
		bdp++;
	}

	/* */
	out_be16(&bdp->status, BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT);
	out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
	out_be16(&bdp->length, 0);

	/* Set the physical address of the host memory
	 * buffers in the buffer descriptors, and the
	 * virtual address for us to work with.
	 */
	bd_virt = qe_port->bd_virt +
		L1_CACHE_ALIGN(qe_port->rx_nrfifos * qe_port->rx_fifosize);
	qe_port->tx_cur = qe_port->tx_bd_base;
	bdp = qe_port->tx_bd_base;
	for (i = 0; i < (qe_port->tx_nrfifos - 1); i++) {
		out_be16(&bdp->status, BD_SC_INTRPT);
		out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
		out_be16(&bdp->length, 0);
		bd_virt += qe_port->tx_fifosize;
		bdp++;
	}

	/* Loopback requires the preamble bit to be set on the first TX BD */
#ifdef LOOPBACK
	setbits16(&qe_port->tx_cur->status, BD_SC_P);
#endif

	out_be16(&bdp->status, BD_SC_WRAP | BD_SC_INTRPT);
	out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
	out_be16(&bdp->length, 0);
}

/*
 * Initialize a UCC for UART.
 *
 * This function configures a given UCC to be used as a UART device. Basic
 * UCC initialization is handled in qe_uart_request_port().  This function
 * does all the UART-specific stuff.
 */
static void qe_uart_init_ucc(struct uart_qe_port *qe_port)
{
	u32 cecr_subblock;
	struct ucc_slow __iomem *uccp = qe_port->uccp;
	struct ucc_uart_pram *uccup = qe_port->uccup;

	unsigned int i;

	/* First, disable TX and RX in the UCC */
	ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX);

	/* Program the UCC UART parameter RAM */
	out_8(&uccup->common.rbmr, UCC_BMR_GBL | UCC_BMR_BO_BE);
	out_8(&uccup->common.tbmr, UCC_BMR_GBL | UCC_BMR_BO_BE);
	out_be16(&uccup->common.mrblr, qe_port->rx_fifosize);
	out_be16(&uccup->maxidl, 0x10);
	out_be16(&uccup->brkcr, 1);
	out_be16(&uccup->parec, 0);
	out_be16(&uccup->frmec, 0);
	out_be16(&uccup->nosec, 0);
	out_be16(&uccup->brkec, 0);
	out_be16(&uccup->uaddr[0], 0);
	out_be16(&uccup->uaddr[1], 0);
	out_be16(&uccup->toseq, 0);
	for (i = 0; i < 8; i++)
		out_be16(&uccup->cchars[i], 0xC000);
	out_be16(&uccup->rccm, 0xc0ff);

	/* Configure the GUMR registers for UART */
	if (soft_uart) {
		/* Soft-UART requires a 1X multiplier for TX */
		clrsetbits_be32(&uccp->gumr_l,
			UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK |
			UCC_SLOW_GUMR_L_RDCR_MASK,
			UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_1 |
			UCC_SLOW_GUMR_L_RDCR_16);

		clrsetbits_be32(&uccp->gumr_h, UCC_SLOW_GUMR_H_RFW,
			UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX);
	} else {
		clrsetbits_be32(&uccp->gumr_l,
			UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK |
			UCC_SLOW_GUMR_L_RDCR_MASK,
			UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_16 |
			UCC_SLOW_GUMR_L_RDCR_16);

		clrsetbits_be32(&uccp->gumr_h,
			UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX,
			UCC_SLOW_GUMR_H_RFW);
	}

#ifdef LOOPBACK
	clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK,
		UCC_SLOW_GUMR_L_DIAG_LOOP);
	clrsetbits_be32(&uccp->gumr_h,
		UCC_SLOW_GUMR_H_CTSP | UCC_SLOW_GUMR_H_RSYN,
		UCC_SLOW_GUMR_H_CDS);
#endif

	/* Disable rx interrupts  and clear all pending events.  */
	out_be16(&uccp->uccm, 0);
	out_be16(&uccp->ucce, 0xffff);
	out_be16(&uccp->udsr, 0x7e7e);

	/* Initialize UPSMR */
	out_be16(&uccp->upsmr, 0);

	if (soft_uart) {
		out_be16(&uccup->supsmr, 0x30);
		out_be16(&uccup->res92, 0);
		out_be32(&uccup->rx_state, 0);
		out_be32(&uccup->rx_cnt, 0);
		out_8(&uccup->rx_bitmark, 0);
		out_8(&uccup->rx_length, 10);
		out_be32(&uccup->dump_ptr, 0x4000);
		out_8(&uccup->rx_temp_dlst_qe, 0);
		out_be32(&uccup->rx_frame_rem, 0);
		out_8(&uccup->rx_frame_rem_size, 0);
		/* Soft-UART requires TX to be 1X */
		out_8(&uccup->tx_mode,
			UCC_UART_TX_STATE_UART | UCC_UART_TX_STATE_X1);
		out_be16(&uccup->tx_state, 0);
		out_8(&uccup->resD4, 0);
		out_be16(&uccup->resD5, 0);

		/* Set UART mode.
		 * Enable receive and transmit.
		 */

		/* From the microcode errata:
		 * 1.GUMR_L register, set mode=0010 (QMC).
		 * 2.Set GUMR_H[17] bit. (UART/AHDLC mode).
		 * 3.Set GUMR_H[19:20] (Transparent mode)
		 * 4.Clear GUMR_H[26] (RFW)
		 * ...
		 * 6.Receiver must use 16x over sampling
		 */
		clrsetbits_be32(&uccp->gumr_l,
			UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK |
			UCC_SLOW_GUMR_L_RDCR_MASK,
			UCC_SLOW_GUMR_L_MODE_QMC | UCC_SLOW_GUMR_L_TDCR_16 |
			UCC_SLOW_GUMR_L_RDCR_16);

		clrsetbits_be32(&uccp->gumr_h,
			UCC_SLOW_GUMR_H_RFW | UCC_SLOW_GUMR_H_RSYN,
			UCC_SLOW_GUMR_H_SUART | UCC_SLOW_GUMR_H_TRX |
			UCC_SLOW_GUMR_H_TTX | UCC_SLOW_GUMR_H_TFL);

#ifdef LOOPBACK
		clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK,
				UCC_SLOW_GUMR_L_DIAG_LOOP);
		clrbits32(&uccp->gumr_h, UCC_SLOW_GUMR_H_CTSP |
			  UCC_SLOW_GUMR_H_CDS);
#endif

		cecr_subblock = ucc_slow_get_qe_cr_subblock(qe_port->ucc_num);
		qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock,
			QE_CR_PROTOCOL_UNSPECIFIED, 0);
	} else {
		cecr_subblock = ucc_slow_get_qe_cr_subblock(qe_port->ucc_num);
		qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock,
			QE_CR_PROTOCOL_UART, 0);
	}
}

/*
 * Initialize the port.
 */
static int qe_uart_startup(struct uart_port *port)
{
	struct uart_qe_port *qe_port =
		container_of(port, struct uart_qe_port, port);
	int ret;

	/*
	 * If we're using Soft-UART mode, then we need to make sure the
	 * firmware has been uploaded first.
	 */
	if (soft_uart && !firmware_loaded) {
		dev_err(port->dev, "Soft-UART firmware not uploaded\n");
		return -ENODEV;
	}

	qe_uart_initbd(qe_port);
	qe_uart_init_ucc(qe_port);

	/* Install interrupt handler. */
	ret = request_irq(port->irq, qe_uart_int, IRQF_SHARED, "ucc-uart",
		qe_port);
	if (ret) {
		dev_err(port->dev, "could not claim IRQ %u\n", port->irq);
		return ret;
	}

	/* Startup rx-int */
	setbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX);
	ucc_slow_enable(qe_port->us_private, COMM_DIR_RX_AND_TX);

	return 0;
}

/*
 * Shutdown the port.
 */
static void qe_uart_shutdown(struct uart_port *port)
{
	struct uart_qe_port *qe_port =
		container_of(port, struct uart_qe_port, port);
	struct ucc_slow __iomem *uccp = qe_port->uccp;
	unsigned int timeout = 20;

	/* Disable RX and TX */

	/* Wait for all the BDs marked sent */
	while (!qe_uart_tx_empty(port)) {
		if (!--timeout) {
			dev_warn(port->dev, "shutdown timeout\n");
			break;
		}
		set_current_state(TASK_UNINTERRUPTIBLE);
		schedule_timeout(2);
	}

	if (qe_port->wait_closing) {
		/* Wait a bit longer */
		set_current_state(TASK_UNINTERRUPTIBLE);
		schedule_timeout(qe_port->wait_closing);
	}

	/* Stop uarts */
	ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX);
	clrbits16(&uccp->uccm, UCC_UART_UCCE_TX | UCC_UART_UCCE_RX);

	/* Shut them really down and reinit buffer descriptors */
	ucc_slow_graceful_stop_tx(qe_port->us_private);
	qe_uart_initbd(qe_port);

	free_irq(port->irq, qe_port);
}

/*
 * Set the serial port parameters.
 */
static void qe_uart_set_termios(struct uart_port *port,
				struct ktermios *termios, struct ktermios *old)
{
	struct uart_qe_port *qe_port =
		container_of(port, struct uart_qe_port, port);
	struct ucc_slow __iomem *uccp = qe_port->uccp;
	unsigned int baud;
	unsigned long flags;
	u16 upsmr = in_be16(&uccp->upsmr);
	struct ucc_uart_pram __iomem *uccup = qe_port->uccup;
	u16 supsmr = in_be16(&uccup->supsmr);
	u8 char_length = 2; /* 1 + CL + PEN + 1 + SL */

	/* Character length programmed into the mode register is the
	 * sum of: 1 start bit, number of data bits, 0 or 1 parity bit,
	 * 1 or 2 stop bits, minus 1.
	 * The value 'bits' counts this for us.
	 */

	/* byte size */
	upsmr &= UCC_UART_UPSMR_CL_MASK;
	supsmr &= UCC_UART_SUPSMR_CL_MASK;

	switch (termios->c_cflag & CSIZE) {
	case CS5:
		upsmr |= UCC_UART_UPSMR_CL_5;
		supsmr |= UCC_UART_SUPSMR_CL_5;
		char_length += 5;
		break;
	case CS6:
		upsmr |= UCC_UART_UPSMR_CL_6;
		supsmr |= UCC_UART_SUPSMR_CL_6;
		char_length += 6;
		break;
	case CS7:
		upsmr |= UCC_UART_UPSMR_CL_7;
		supsmr |= UCC_UART_SUPSMR_CL_7;
		char_length += 7;
		break;
	default:	/* case CS8 */
		upsmr |= UCC_UART_UPSMR_CL_8;
		supsmr |= UCC_UART_SUPSMR_CL_8;
		char_length += 8;
		break;
	}

	/* If CSTOPB is set, we want two stop bits */
	if (termios->c_cflag & CSTOPB) {
		upsmr |= UCC_UART_UPSMR_SL;
		supsmr |= UCC_UART_SUPSMR_SL;
		char_length++;  /* + SL */
	}

	if (termios->c_cflag & PARENB) {
		upsmr |= UCC_UART_UPSMR_PEN;
		supsmr |= UCC_UART_SUPSMR_PEN;
		char_length++;  /* + PEN */

		if (!(termios->c_cflag & PARODD)) {
			upsmr &= ~(UCC_UART_UPSMR_RPM_MASK |
				   UCC_UART_UPSMR_TPM_MASK);
			upsmr |= UCC_UART_UPSMR_RPM_EVEN |
				UCC_UART_UPSMR_TPM_EVEN;
			supsmr &= ~(UCC_UART_SUPSMR_RPM_MASK |
				    UCC_UART_SUPSMR_TPM_MASK);
			supsmr |= UCC_UART_SUPSMR_RPM_EVEN |
				UCC_UART_SUPSMR_TPM_EVEN;
		}
	}

	/*
	 * Set up parity check flag
	 */
	port->read_status_mask = BD_SC_EMPTY | BD_SC_OV;
	if (termios->c_iflag & INPCK)
		port->read_status_mask |= BD_SC_FR | BD_SC_PR;
	if (termios->c_iflag & (BRKINT | PARMRK))
		port->read_status_mask |= BD_SC_BR;

	/*
	 * Characters to ignore
	 */
	port->ignore_status_mask = 0;
	if (termios->c_iflag & IGNPAR)
		port->ignore_status_mask |= BD_SC_PR | BD_SC_FR;
	if (termios->c_iflag & IGNBRK) {
		port->ignore_status_mask |= BD_SC_BR;
		/*
		 * If we're ignore parity and break indicators, ignore
		 * overruns too.  (For real raw support).
		 */
		if (termios->c_iflag & IGNPAR)
			port->ignore_status_mask |= BD_SC_OV;
	}
	/*
	 * !!! ignore all characters if CREAD is not set
	 */
	if ((termios->c_cflag & CREAD) == 0)
		port->read_status_mask &= ~BD_SC_EMPTY;

	baud = uart_get_baud_rate(port, termios, old, 0, 115200);

	/* Do we really need a spinlock here? */
	spin_lock_irqsave(&port->lock, flags);

	/* Update the per-port timeout. */
	uart_update_timeout(port, termios->c_cflag, baud);

	out_be16(&uccp->upsmr, upsmr);
	if (soft_uart) {
		out_be16(&uccup->supsmr, supsmr);
		out_8(&uccup->rx_length, char_length);

		/* Soft-UART requires a 1X multiplier for TX */
		qe_setbrg(qe_port->us_info.rx_clock, baud, 16);
		qe_setbrg(qe_port->us_info.tx_clock, baud, 1);
	} else {
		qe_setbrg(qe_port->us_info.rx_clock, baud, 16);
		qe_setbrg(qe_port->us_info.tx_clock, baud, 16);
	}

	spin_unlock_irqrestore(&port->lock, flags);
}

/*
 * Return a pointer to a string that describes what kind of port this is.
 */
static const char *qe_uart_type(struct uart_port *port)
{
	return "QE";
}

/*
 * Allocate any memory and I/O resources required by the port.
 */
static int qe_uart_request_port(struct uart_port *port)
{
	int ret;
	struct uart_qe_port *qe_port =
		container_of(port, struct uart_qe_port, port);
	struct ucc_slow_info *us_info = &qe_port->us_info;
	struct ucc_slow_private *uccs;
	unsigned int rx_size, tx_size;
	void *bd_virt;
	dma_addr_t bd_dma_addr = 0;

	ret = ucc_slow_init(us_info, &uccs);
	if (ret) {
		dev_err(port->dev, "could not initialize UCC%u\n",
		       qe_port->ucc_num);
		return ret;
	}

	qe_port->us_private = uccs;
	qe_port->uccp = uccs->us_regs;
	qe_port->uccup = (struct ucc_uart_pram *) uccs->us_pram;
	qe_port->rx_bd_base = uccs->rx_bd;
	qe_port->tx_bd_base = uccs->tx_bd;

	/*
	 * Allocate the transmit and receive data buffers.
	 */

	rx_size = L1_CACHE_ALIGN(qe_port->rx_nrfifos * qe_port->rx_fifosize);
	tx_size = L1_CACHE_ALIGN(qe_port->tx_nrfifos * qe_port->tx_fifosize);

	bd_virt = dma_alloc_coherent(port->dev, rx_size + tx_size, &bd_dma_addr,
		GFP_KERNEL);
	if (!bd_virt) {
		dev_err(port->dev, "could not allocate buffer descriptors\n");
		return -ENOMEM;
	}

	qe_port->bd_virt = bd_virt;
	qe_port->bd_dma_addr = bd_dma_addr;
	qe_port->bd_size = rx_size + tx_size;

	qe_port->rx_buf = bd_virt;
	qe_port->tx_buf = qe_port->rx_buf + rx_size;

	return 0;
}

/*
 * Configure the port.
 *
 * We say we're a CPM-type port because that's mostly true.  Once the device
 * is configured, this driver operates almost identically to the CPM serial
 * driver.
 */
static void qe_uart_config_port(struct uart_port *port, int flags)
{
	if (flags & UART_CONFIG_TYPE) {
		port->type = PORT_CPM;
		qe_uart_request_port(port);
	}
}

/*
 * Release any memory and I/O resources that were allocated in
 * qe_uart_request_port().
 */
static void qe_uart_release_port(struct uart_port *port)
{
	struct uart_qe_port *qe_port =
		container_of(port, struct uart_qe_port, port);
	struct ucc_slow_private *uccs = qe_port->us_private;

	dma_free_coherent(port->dev, qe_port->bd_size, qe_port->bd_virt,
			  qe_port->bd_dma_addr);

	ucc_slow_free(uccs);
}

/*
 * Verify that the data in serial_struct is suitable for this device.
 */
static int qe_uart_verify_port(struct uart_port *port,
			       struct serial_struct *ser)
{
	if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM)
		return -EINVAL;

	if (ser->irq < 0 || ser->irq >= nr_irqs)
		return -EINVAL;

	if (ser->baud_base < 9600)
		return -EINVAL;

	return 0;
}
/* UART operations
 *
 * Details on these functions can be found in Documentation/serial/driver
 */
static struct uart_ops qe_uart_pops = {
	.tx_empty       = qe_uart_tx_empty,
	.set_mctrl      = qe_uart_set_mctrl,
	.get_mctrl      = qe_uart_get_mctrl,
	.stop_tx	= qe_uart_stop_tx,
	.start_tx       = qe_uart_start_tx,
	.stop_rx	= qe_uart_stop_rx,
	.enable_ms      = qe_uart_enable_ms,
	.break_ctl      = qe_uart_break_ctl,
	.startup	= qe_uart_startup,
	.shutdown       = qe_uart_shutdown,
	.set_termios    = qe_uart_set_termios,
	.type   	= qe_uart_type,
	.release_port   = qe_uart_release_port,
	.request_port   = qe_uart_request_port,
	.config_port    = qe_uart_config_port,
	.verify_port    = qe_uart_verify_port,
};

/*
 * Obtain the SOC model number and revision level
 *
 * This function parses the device tree to obtain the SOC model.  It then
 * reads the SVR register to the revision.
 *
 * The device tree stores the SOC model two different ways.
 *
 * The new way is:
 *
 *      	cpu@0 {
 *      		compatible = "PowerPC,8323";
 *      		device_type = "cpu";
 *      		...
 *
 *
 * The old way is:
 *      	 PowerPC,8323@0 {
 *      		device_type = "cpu";
 *      		...
 *
 * This code first checks the new way, and then the old way.
 */
static unsigned int soc_info(unsigned int *rev_h, unsigned int *rev_l)
{
	struct device_node *np;
	const char *soc_string;
	unsigned int svr;
	unsigned int soc;

	/* Find the CPU node */
	np = of_find_node_by_type(NULL, "cpu");
	if (!np)
		return 0;
	/* Find the compatible property */
	soc_string = of_get_property(np, "compatible", NULL);
	if (!soc_string)
		/* No compatible property, so try the name. */
		soc_string = np->name;

	/* Extract the SOC number from the "PowerPC," string */
	if ((sscanf(soc_string, "PowerPC,%u", &soc) != 1) || !soc)
		return 0;

	/* Get the revision from the SVR */
	svr = mfspr(SPRN_SVR);
	*rev_h = (svr >> 4) & 0xf;
	*rev_l = svr & 0xf;

	return soc;
}

/*
 * requst_firmware_nowait() callback function
 *
 * This function is called by the kernel when a firmware is made available,
 * or if it times out waiting for the firmware.
 */
static void uart_firmware_cont(const struct firmware *fw, void *context)
{
	struct qe_firmware *firmware;
	struct device *dev = context;
	int ret;

	if (!fw) {
		dev_err(dev, "firmware not found\n");
		return;
	}

	firmware = (struct qe_firmware *) fw->data;

	if (firmware->header.length != fw->size) {
		dev_err(dev, "invalid firmware\n");
		goto out;
	}

	ret = qe_upload_firmware(firmware);
	if (ret) {
		dev_err(dev, "could not load firmware\n");
		goto out;
	}

	firmware_loaded = 1;
 out:
	release_firmware(fw);
}

static int ucc_uart_probe(struct platform_device *ofdev)
{
	struct device_node *np = ofdev->dev.of_node;
	const unsigned int *iprop;      /* Integer OF properties */
	const char *sprop;      /* String OF properties */
	struct uart_qe_port *qe_port = NULL;
	struct resource res;
	int ret;

	/*
	 * Determine if we need Soft-UART mode
	 */
	if (of_find_property(np, "soft-uart", NULL)) {
		dev_dbg(&ofdev->dev, "using Soft-UART mode\n");
		soft_uart = 1;
	}

	/*
	 * If we are using Soft-UART, determine if we need to upload the
	 * firmware, too.
	 */
	if (soft_uart) {
		struct qe_firmware_info *qe_fw_info;

		qe_fw_info = qe_get_firmware_info();

		/* Check if the firmware has been uploaded. */
		if (qe_fw_info && strstr(qe_fw_info->id, "Soft-UART")) {
			firmware_loaded = 1;
		} else {
			char filename[32];
			unsigned int soc;
			unsigned int rev_h;
			unsigned int rev_l;

			soc = soc_info(&rev_h, &rev_l);
			if (!soc) {
				dev_err(&ofdev->dev, "unknown CPU model\n");
				return -ENXIO;
			}
			sprintf(filename, "fsl_qe_ucode_uart_%u_%u%u.bin",
				soc, rev_h, rev_l);

			dev_info(&ofdev->dev, "waiting for firmware %s\n",
				filename);

			/*
			 * We call request_firmware_nowait instead of
			 * request_firmware so that the driver can load and
			 * initialize the ports without holding up the rest of
			 * the kernel.  If hotplug support is enabled in the
			 * kernel, then we use it.
			 */
			ret = request_firmware_nowait(THIS_MODULE,
				FW_ACTION_HOTPLUG, filename, &ofdev->dev,
				GFP_KERNEL, &ofdev->dev, uart_firmware_cont);
			if (ret) {
				dev_err(&ofdev->dev,
					"could not load firmware %s\n",
					filename);
				return ret;
			}
		}
	}

	qe_port = kzalloc(sizeof(struct uart_qe_port), GFP_KERNEL);
	if (!qe_port) {
		dev_err(&ofdev->dev, "can't allocate QE port structure\n");
		return -ENOMEM;
	}

	/* Search for IRQ and mapbase */
	ret = of_address_to_resource(np, 0, &res);
	if (ret) {
		dev_err(&ofdev->dev, "missing 'reg' property in device tree\n");
		goto out_free;
	}
	if (!res.start) {
		dev_err(&ofdev->dev, "invalid 'reg' property in device tree\n");
		ret = -EINVAL;
		goto out_free;
	}
	qe_port->port.mapbase = res.start;

	/* Get the UCC number (device ID) */
	/* UCCs are numbered 1-7 */
	iprop = of_get_property(np, "cell-index", NULL);
	if (!iprop) {
		iprop = of_get_property(np, "device-id", NULL);
		if (!iprop) {
			dev_err(&ofdev->dev, "UCC is unspecified in "
				"device tree\n");
			ret = -EINVAL;
			goto out_free;
		}
	}

	if ((*iprop < 1) || (*iprop > UCC_MAX_NUM)) {
		dev_err(&ofdev->dev, "no support for UCC%u\n", *iprop);
		ret = -ENODEV;
		goto out_free;
	}
	qe_port->ucc_num = *iprop - 1;

	/*
	 * In the future, we should not require the BRG to be specified in the
	 * device tree.  If no clock-source is specified, then just pick a BRG
	 * to use.  This requires a new QE library function that manages BRG
	 * assignments.
	 */

	sprop = of_get_property(np, "rx-clock-name", NULL);
	if (!sprop) {
		dev_err(&ofdev->dev, "missing rx-clock-name in device tree\n");
		ret = -ENODEV;
		goto out_free;
	}

	qe_port->us_info.rx_clock = qe_clock_source(sprop);
	if ((qe_port->us_info.rx_clock < QE_BRG1) ||
	    (qe_port->us_info.rx_clock > QE_BRG16)) {
		dev_err(&ofdev->dev, "rx-clock-name must be a BRG for UART\n");
		ret = -ENODEV;
		goto out_free;
	}

#ifdef LOOPBACK
	/* In internal loopback mode, TX and RX must use the same clock */
	qe_port->us_info.tx_clock = qe_port->us_info.rx_clock;
#else
	sprop = of_get_property(np, "tx-clock-name", NULL);
	if (!sprop) {
		dev_err(&ofdev->dev, "missing tx-clock-name in device tree\n");
		ret = -ENODEV;
		goto out_free;
	}
	qe_port->us_info.tx_clock = qe_clock_source(sprop);
#endif
	if ((qe_port->us_info.tx_clock < QE_BRG1) ||
	    (qe_port->us_info.tx_clock > QE_BRG16)) {
		dev_err(&ofdev->dev, "tx-clock-name must be a BRG for UART\n");
		ret = -ENODEV;
		goto out_free;
	}

	/* Get the port number, numbered 0-3 */
	iprop = of_get_property(np, "port-number", NULL);
	if (!iprop) {
		dev_err(&ofdev->dev, "missing port-number in device tree\n");
		ret = -EINVAL;
		goto out_free;
	}
	qe_port->port.line = *iprop;
	if (qe_port->port.line >= UCC_MAX_UART) {
		dev_err(&ofdev->dev, "port-number must be 0-%u\n",
			UCC_MAX_UART - 1);
		ret = -EINVAL;
		goto out_free;
	}

	qe_port->port.irq = irq_of_parse_and_map(np, 0);
	if (qe_port->port.irq == 0) {
		dev_err(&ofdev->dev, "could not map IRQ for UCC%u\n",
		       qe_port->ucc_num + 1);
		ret = -EINVAL;
		goto out_free;
	}

	/*
	 * Newer device trees have an "fsl,qe" compatible property for the QE
	 * node, but we still need to support older device trees.
	 */
	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
	if (!np) {
		np = of_find_node_by_type(NULL, "qe");
		if (!np) {
			dev_err(&ofdev->dev, "could not find 'qe' node\n");
			ret = -EINVAL;
			goto out_free;
		}
	}

	iprop = of_get_property(np, "brg-frequency", NULL);
	if (!iprop) {
		dev_err(&ofdev->dev,
		       "missing brg-frequency in device tree\n");
		ret = -EINVAL;
		goto out_np;
	}

	if (*iprop)
		qe_port->port.uartclk = *iprop;
	else {
		/*
		 * Older versions of U-Boot do not initialize the brg-frequency
		 * property, so in this case we assume the BRG frequency is
		 * half the QE bus frequency.
		 */
		iprop = of_get_property(np, "bus-frequency", NULL);
		if (!iprop) {
			dev_err(&ofdev->dev,
				"missing QE bus-frequency in device tree\n");
			ret = -EINVAL;
			goto out_np;
		}
		if (*iprop)
			qe_port->port.uartclk = *iprop / 2;
		else {
			dev_err(&ofdev->dev,
				"invalid QE bus-frequency in device tree\n");
			ret = -EINVAL;
			goto out_np;
		}
	}

	spin_lock_init(&qe_port->port.lock);
	qe_port->np = np;
	qe_port->port.dev = &ofdev->dev;
	qe_port->port.ops = &qe_uart_pops;
	qe_port->port.iotype = UPIO_MEM;

	qe_port->tx_nrfifos = TX_NUM_FIFO;
	qe_port->tx_fifosize = TX_BUF_SIZE;
	qe_port->rx_nrfifos = RX_NUM_FIFO;
	qe_port->rx_fifosize = RX_BUF_SIZE;

	qe_port->wait_closing = UCC_WAIT_CLOSING;
	qe_port->port.fifosize = 512;
	qe_port->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;

	qe_port->us_info.ucc_num = qe_port->ucc_num;
	qe_port->us_info.regs = (phys_addr_t) res.start;
	qe_port->us_info.irq = qe_port->port.irq;

	qe_port->us_info.rx_bd_ring_len = qe_port->rx_nrfifos;
	qe_port->us_info.tx_bd_ring_len = qe_port->tx_nrfifos;

	/* Make sure ucc_slow_init() initializes both TX and RX */
	qe_port->us_info.init_tx = 1;
	qe_port->us_info.init_rx = 1;

	/* Add the port to the uart sub-system.  This will cause
	 * qe_uart_config_port() to be called, so the us_info structure must
	 * be initialized.
	 */
	ret = uart_add_one_port(&ucc_uart_driver, &qe_port->port);
	if (ret) {
		dev_err(&ofdev->dev, "could not add /dev/ttyQE%u\n",
		       qe_port->port.line);
		goto out_np;
	}

	dev_set_drvdata(&ofdev->dev, qe_port);

	dev_info(&ofdev->dev, "UCC%u assigned to /dev/ttyQE%u\n",
		qe_port->ucc_num + 1, qe_port->port.line);

	/* Display the mknod command for this device */
	dev_dbg(&ofdev->dev, "mknod command is 'mknod /dev/ttyQE%u c %u %u'\n",
	       qe_port->port.line, SERIAL_QE_MAJOR,
	       SERIAL_QE_MINOR + qe_port->port.line);

	return 0;
out_np:
	of_node_put(np);
out_free:
	kfree(qe_port);
	return ret;
}

static int ucc_uart_remove(struct platform_device *ofdev)
{
	struct uart_qe_port *qe_port = dev_get_drvdata(&ofdev->dev);

	dev_info(&ofdev->dev, "removing /dev/ttyQE%u\n", qe_port->port.line);

	uart_remove_one_port(&ucc_uart_driver, &qe_port->port);

	dev_set_drvdata(&ofdev->dev, NULL);
	kfree(qe_port);

	return 0;
}

static struct of_device_id ucc_uart_match[] = {
	{
		.type = "serial",
		.compatible = "ucc_uart",
	},
	{},
};
MODULE_DEVICE_TABLE(of, ucc_uart_match);

static struct platform_driver ucc_uart_of_driver = {
	.driver = {
		.name = "ucc_uart",
		.owner = THIS_MODULE,
		.of_match_table    = ucc_uart_match,
	},
	.probe  	= ucc_uart_probe,
	.remove 	= ucc_uart_remove,
};

static int __init ucc_uart_init(void)
{
	int ret;

	printk(KERN_INFO "Freescale QUICC Engine UART device driver\n");
#ifdef LOOPBACK
	printk(KERN_INFO "ucc-uart: Using loopback mode\n");
#endif

	ret = uart_register_driver(&ucc_uart_driver);
	if (ret) {
		printk(KERN_ERR "ucc-uart: could not register UART driver\n");
		return ret;
	}

	ret = platform_driver_register(&ucc_uart_of_driver);
	if (ret)
		printk(KERN_ERR
		       "ucc-uart: could not register platform driver\n");

	return ret;
}

static void __exit ucc_uart_exit(void)
{
	printk(KERN_INFO
	       "Freescale QUICC Engine UART device driver unloading\n");

	platform_driver_unregister(&ucc_uart_of_driver);
	uart_unregister_driver(&ucc_uart_driver);
}

module_init(ucc_uart_init);
module_exit(ucc_uart_exit);

MODULE_DESCRIPTION("Freescale QUICC Engine (QE) UART");
MODULE_AUTHOR("Timur Tabi <timur@freescale.com>");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_QE_MAJOR);