aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/phy/samsung-usbphy.c
blob: 967101ec15fdf268cc8d2a73493be36df718d687 (plain) (blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
/* linux/drivers/usb/phy/samsung-usbphy.c
 *
 * Copyright (c) 2012 Samsung Electronics Co., Ltd.
 *              http://www.samsung.com
 *
 * Author: Praveen Paneri <p.paneri@samsung.com>
 *
 * Samsung USB2.0 PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and
 * OHCI-EXYNOS controllers.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/usb/otg.h>
#include <linux/usb/samsung_usb_phy.h>
#include <linux/platform_data/samsung-usbphy.h>

/* Register definitions */

#define SAMSUNG_PHYPWR				(0x00)

#define PHYPWR_NORMAL_MASK			(0x19 << 0)
#define PHYPWR_OTG_DISABLE			(0x1 << 4)
#define PHYPWR_ANALOG_POWERDOWN			(0x1 << 3)
#define PHYPWR_FORCE_SUSPEND			(0x1 << 1)
/* For Exynos4 */
#define PHYPWR_NORMAL_MASK_PHY0			(0x39 << 0)
#define PHYPWR_SLEEP_PHY0			(0x1 << 5)

#define SAMSUNG_PHYCLK				(0x04)

#define PHYCLK_MODE_USB11			(0x1 << 6)
#define PHYCLK_EXT_OSC				(0x1 << 5)
#define PHYCLK_COMMON_ON_N			(0x1 << 4)
#define PHYCLK_ID_PULL				(0x1 << 2)
#define PHYCLK_CLKSEL_MASK			(0x3 << 0)
#define PHYCLK_CLKSEL_48M			(0x0 << 0)
#define PHYCLK_CLKSEL_12M			(0x2 << 0)
#define PHYCLK_CLKSEL_24M			(0x3 << 0)

#define SAMSUNG_RSTCON				(0x08)

#define RSTCON_PHYLINK_SWRST			(0x1 << 2)
#define RSTCON_HLINK_SWRST			(0x1 << 1)
#define RSTCON_SWRST				(0x1 << 0)

/* EXYNOS5 */
#define EXYNOS5_PHY_HOST_CTRL0			(0x00)

#define HOST_CTRL0_PHYSWRSTALL			(0x1 << 31)

#define HOST_CTRL0_REFCLKSEL_MASK		(0x3 << 19)
#define HOST_CTRL0_REFCLKSEL_XTAL		(0x0 << 19)
#define HOST_CTRL0_REFCLKSEL_EXTL		(0x1 << 19)
#define HOST_CTRL0_REFCLKSEL_CLKCORE		(0x2 << 19)

#define HOST_CTRL0_FSEL_MASK			(0x7 << 16)
#define HOST_CTRL0_FSEL(_x)			((_x) << 16)

#define FSEL_CLKSEL_50M				(0x7)
#define FSEL_CLKSEL_24M				(0x5)
#define FSEL_CLKSEL_20M				(0x4)
#define FSEL_CLKSEL_19200K			(0x3)
#define FSEL_CLKSEL_12M				(0x2)
#define FSEL_CLKSEL_10M				(0x1)
#define FSEL_CLKSEL_9600K			(0x0)

#define HOST_CTRL0_TESTBURNIN			(0x1 << 11)
#define HOST_CTRL0_RETENABLE			(0x1 << 10)
#define HOST_CTRL0_COMMONON_N			(0x1 << 9)
#define HOST_CTRL0_SIDDQ			(0x1 << 6)
#define HOST_CTRL0_FORCESLEEP			(0x1 << 5)
#define HOST_CTRL0_FORCESUSPEND			(0x1 << 4)
#define HOST_CTRL0_WORDINTERFACE		(0x1 << 3)
#define HOST_CTRL0_UTMISWRST			(0x1 << 2)
#define HOST_CTRL0_LINKSWRST			(0x1 << 1)
#define HOST_CTRL0_PHYSWRST			(0x1 << 0)

#define EXYNOS5_PHY_HOST_TUNE0			(0x04)

#define EXYNOS5_PHY_HSIC_CTRL1			(0x10)

#define EXYNOS5_PHY_HSIC_TUNE1			(0x14)

#define EXYNOS5_PHY_HSIC_CTRL2			(0x20)

#define EXYNOS5_PHY_HSIC_TUNE2			(0x24)

#define HSIC_CTRL_REFCLKSEL_MASK		(0x3 << 23)
#define HSIC_CTRL_REFCLKSEL			(0x2 << 23)

#define HSIC_CTRL_REFCLKDIV_MASK		(0x7f << 16)
#define HSIC_CTRL_REFCLKDIV(_x)			((_x) << 16)
#define HSIC_CTRL_REFCLKDIV_12			(0x24 << 16)
#define HSIC_CTRL_REFCLKDIV_15			(0x1c << 16)
#define HSIC_CTRL_REFCLKDIV_16			(0x1a << 16)
#define HSIC_CTRL_REFCLKDIV_19_2		(0x15 << 16)
#define HSIC_CTRL_REFCLKDIV_20			(0x14 << 16)

#define HSIC_CTRL_SIDDQ				(0x1 << 6)
#define HSIC_CTRL_FORCESLEEP			(0x1 << 5)
#define HSIC_CTRL_FORCESUSPEND			(0x1 << 4)
#define HSIC_CTRL_WORDINTERFACE			(0x1 << 3)
#define HSIC_CTRL_UTMISWRST			(0x1 << 2)
#define HSIC_CTRL_PHYSWRST			(0x1 << 0)

#define EXYNOS5_PHY_HOST_EHCICTRL		(0x30)

#define HOST_EHCICTRL_ENAINCRXALIGN		(0x1 << 29)
#define HOST_EHCICTRL_ENAINCR4			(0x1 << 28)
#define HOST_EHCICTRL_ENAINCR8			(0x1 << 27)
#define HOST_EHCICTRL_ENAINCR16			(0x1 << 26)

#define EXYNOS5_PHY_HOST_OHCICTRL		(0x34)

#define HOST_OHCICTRL_SUSPLGCY			(0x1 << 3)
#define HOST_OHCICTRL_APPSTARTCLK		(0x1 << 2)
#define HOST_OHCICTRL_CNTSEL			(0x1 << 1)
#define HOST_OHCICTRL_CLKCKTRST			(0x1 << 0)

#define EXYNOS5_PHY_OTG_SYS			(0x38)

#define OTG_SYS_PHYLINK_SWRESET			(0x1 << 14)
#define OTG_SYS_LINKSWRST_UOTG			(0x1 << 13)
#define OTG_SYS_PHY0_SWRST			(0x1 << 12)

#define OTG_SYS_REFCLKSEL_MASK			(0x3 << 9)
#define OTG_SYS_REFCLKSEL_XTAL			(0x0 << 9)
#define OTG_SYS_REFCLKSEL_EXTL			(0x1 << 9)
#define OTG_SYS_REFCLKSEL_CLKCORE		(0x2 << 9)

#define OTG_SYS_IDPULLUP_UOTG			(0x1 << 8)
#define OTG_SYS_COMMON_ON			(0x1 << 7)

#define OTG_SYS_FSEL_MASK			(0x7 << 4)
#define OTG_SYS_FSEL(_x)			((_x) << 4)

#define OTG_SYS_FORCESLEEP			(0x1 << 3)
#define OTG_SYS_OTGDISABLE			(0x1 << 2)
#define OTG_SYS_SIDDQ_UOTG			(0x1 << 1)
#define OTG_SYS_FORCESUSPEND			(0x1 << 0)

#define EXYNOS5_PHY_OTG_TUNE			(0x40)

#ifndef MHZ
#define MHZ (1000*1000)
#endif

#ifndef KHZ
#define KHZ (1000)
#endif

#define EXYNOS_USBHOST_PHY_CTRL_OFFSET		(0x4)
#define S3C64XX_USBPHY_ENABLE			(0x1 << 16)
#define EXYNOS_USBPHY_ENABLE			(0x1 << 0)
#define EXYNOS_USB20PHY_CFG_HOST_LINK		(0x1 << 0)

enum samsung_cpu_type {
	TYPE_S3C64XX,
	TYPE_EXYNOS4210,
	TYPE_EXYNOS5250,
};

/*
 * struct samsung_usbphy_drvdata - driver data for various SoC variants
 * @cpu_type: machine identifier
 * @devphy_en_mask: device phy enable mask for PHY CONTROL register
 * @hostphy_en_mask: host phy enable mask for PHY CONTROL register
 * @devphy_reg_offset: offset to DEVICE PHY CONTROL register from
 *		       mapped address of system controller.
 * @hostphy_reg_offset: offset to HOST PHY CONTROL register from
 *		       mapped address of system controller.
 *
 *	Here we have a separate mask for device type phy.
 *	Having different masks for host and device type phy helps
 *	in setting independent masks in case of SoCs like S5PV210,
 *	in which PHY0 and PHY1 enable bits belong to same register
 *	placed at position 0 and 1 respectively.
 *	Although for newer SoCs like exynos these bits belong to
 *	different registers altogether placed at position 0.
 */
struct samsung_usbphy_drvdata {
	int cpu_type;
	int devphy_en_mask;
	int hostphy_en_mask;
	u32 devphy_reg_offset;
	u32 hostphy_reg_offset;
};

/*
 * struct samsung_usbphy - transceiver driver state
 * @phy: transceiver structure
 * @plat: platform data
 * @dev: The parent device supplied to the probe function
 * @clk: usb phy clock
 * @regs: usb phy controller registers memory base
 * @pmuregs: USB device PHY_CONTROL register memory base
 * @sysreg: USB2.0 PHY_CFG register memory base
 * @ref_clk_freq: reference clock frequency selection
 * @drv_data: driver data available for different SoCs
 * @phy_type: Samsung SoCs specific phy types:	#HOST
 *						#DEVICE
 * @phy_usage: usage count for phy
 * @lock: lock for phy operations
 */
struct samsung_usbphy {
	struct usb_phy	phy;
	struct samsung_usbphy_data *plat;
	struct device	*dev;
	struct clk	*clk;
	void __iomem	*regs;
	void __iomem	*pmuregs;
	void __iomem	*sysreg;
	int		ref_clk_freq;
	const struct samsung_usbphy_drvdata *drv_data;
	enum samsung_usb_phy_type phy_type;
	atomic_t	phy_usage;
	spinlock_t	lock;
};

#define phy_to_sphy(x)		container_of((x), struct samsung_usbphy, phy)

int samsung_usbphy_set_host(struct usb_otg *otg, struct usb_bus *host)
{
	if (!otg)
		return -ENODEV;

	if (!otg->host)
		otg->host = host;

	return 0;
}

static int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy)
{
	struct device_node *usbphy_sys;

	/* Getting node for system controller interface for usb-phy */
	usbphy_sys = of_get_child_by_name(sphy->dev->of_node, "usbphy-sys");
	if (!usbphy_sys) {
		dev_err(sphy->dev, "No sys-controller interface for usb-phy\n");
		return -ENODEV;
	}

	sphy->pmuregs = of_iomap(usbphy_sys, 0);

	if (sphy->pmuregs == NULL) {
		dev_err(sphy->dev, "Can't get usb-phy pmu control register\n");
		goto err0;
	}

	sphy->sysreg = of_iomap(usbphy_sys, 1);

	/*
	 * Not returning error code here, since this situation is not fatal.
	 * Few SoCs may not have this switch available
	 */
	if (sphy->sysreg == NULL)
		dev_warn(sphy->dev, "Can't get usb-phy sysreg cfg register\n");

	of_node_put(usbphy_sys);

	return 0;

err0:
	of_node_put(usbphy_sys);
	return -ENXIO;
}

/*
 * Set isolation here for phy.
 * Here 'on = true' would mean USB PHY block is isolated, hence
 * de-activated and vice-versa.
 */
static void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on)
{
	void __iomem *reg = NULL;
	u32 reg_val;
	u32 en_mask = 0;

	if (!sphy->pmuregs) {
		dev_warn(sphy->dev, "Can't set pmu isolation\n");
		return;
	}

	switch (sphy->drv_data->cpu_type) {
	case TYPE_S3C64XX:
		/*
		 * Do nothing: We will add here once S3C64xx goes for DT support
		 */
		break;
	case TYPE_EXYNOS4210:
		/*
		 * Fall through since exynos4210 and exynos5250 have similar
		 * register architecture: two separate registers for host and
		 * device phy control with enable bit at position 0.
		 */
	case TYPE_EXYNOS5250:
		if (sphy->phy_type == USB_PHY_TYPE_DEVICE) {
			reg = sphy->pmuregs +
				sphy->drv_data->devphy_reg_offset;
			en_mask = sphy->drv_data->devphy_en_mask;
		} else if (sphy->phy_type == USB_PHY_TYPE_HOST) {
			reg = sphy->pmuregs +
				sphy->drv_data->hostphy_reg_offset;
			en_mask = sphy->drv_data->hostphy_en_mask;
		}
		break;
	default:
		dev_err(sphy->dev, "Invalid SoC type\n");
		return;
	}

	reg_val = readl(reg);

	if (on)
		reg_val &= ~en_mask;
	else
		reg_val |= en_mask;

	writel(reg_val, reg);
}

/*
 * Configure the mode of working of usb-phy here: HOST/DEVICE.
 */
static void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy)
{
	u32 reg;

	if (!sphy->sysreg) {
		dev_warn(sphy->dev, "Can't configure specified phy mode\n");
		return;
	}

	reg = readl(sphy->sysreg);

	if (sphy->phy_type == USB_PHY_TYPE_DEVICE)
		reg &= ~EXYNOS_USB20PHY_CFG_HOST_LINK;
	else if (sphy->phy_type == USB_PHY_TYPE_HOST)
		reg |= EXYNOS_USB20PHY_CFG_HOST_LINK;

	writel(reg, sphy->sysreg);
}

/*
 * PHYs are different for USB Device and USB Host.
 * This make sure that correct PHY type is selected before
 * any operation on PHY.
 */
static int samsung_usbphy_set_type(struct usb_phy *phy,
				enum samsung_usb_phy_type phy_type)
{
	struct samsung_usbphy *sphy = phy_to_sphy(phy);

	sphy->phy_type = phy_type;

	return 0;
}

/*
 * Returns reference clock frequency selection value
 */
static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
{
	struct clk *ref_clk;
	int refclk_freq = 0;

	/*
	 * In exynos5250 USB host and device PHY use
	 * external crystal clock XXTI
	 */
	if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
		ref_clk = clk_get(sphy->dev, "ext_xtal");
	else
		ref_clk = clk_get(sphy->dev, "xusbxti");
	if (IS_ERR(ref_clk)) {
		dev_err(sphy->dev, "Failed to get reference clock\n");
		return PTR_ERR(ref_clk);
	}

	if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) {
		/* set clock frequency for PLL */
		switch (clk_get_rate(ref_clk)) {
		case 9600 * KHZ:
			refclk_freq = FSEL_CLKSEL_9600K;
			break;
		case 10 * MHZ:
			refclk_freq = FSEL_CLKSEL_10M;
			break;
		case 12 * MHZ:
			refclk_freq = FSEL_CLKSEL_12M;
			break;
		case 19200 * KHZ:
			refclk_freq = FSEL_CLKSEL_19200K;
			break;
		case 20 * MHZ:
			refclk_freq = FSEL_CLKSEL_20M;
			break;
		case 50 * MHZ:
			refclk_freq = FSEL_CLKSEL_50M;
			break;
		case 24 * MHZ:
		default:
			/* default reference clock */
			refclk_freq = FSEL_CLKSEL_24M;
			break;
		}
	} else {
		switch (clk_get_rate(ref_clk)) {
		case 12 * MHZ:
			refclk_freq = PHYCLK_CLKSEL_12M;
			break;
		case 24 * MHZ:
			refclk_freq = PHYCLK_CLKSEL_24M;
			break;
		case 48 * MHZ:
			refclk_freq = PHYCLK_CLKSEL_48M;
			break;
		default:
			if (sphy->drv_data->cpu_type == TYPE_S3C64XX)
				refclk_freq = PHYCLK_CLKSEL_48M;
			else
				refclk_freq = PHYCLK_CLKSEL_24M;
			break;
		}
	}
	clk_put(ref_clk);

	return refclk_freq;
}

static bool exynos5_phyhost_is_on(void *regs)
{
	u32 reg;

	reg = readl(regs + EXYNOS5_PHY_HOST_CTRL0);

	return !(reg & HOST_CTRL0_SIDDQ);
}

static void samsung_exynos5_usbphy_enable(struct samsung_usbphy *sphy)
{
	void __iomem *regs = sphy->regs;
	u32 phyclk = sphy->ref_clk_freq;
	u32 phyhost;
	u32 phyotg;
	u32 phyhsic;
	u32 ehcictrl;
	u32 ohcictrl;

	/*
	 * phy_usage helps in keeping usage count for phy
	 * so that the first consumer enabling the phy is also
	 * the last consumer to disable it.
	 */

	atomic_inc(&sphy->phy_usage);

	if (exynos5_phyhost_is_on(regs)) {
		dev_info(sphy->dev, "Already power on PHY\n");
		return;
	}

	/* Host configuration */
	phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0);

	/* phy reference clock configuration */
	phyhost &= ~HOST_CTRL0_FSEL_MASK;
	phyhost |= HOST_CTRL0_FSEL(phyclk);

	/* host phy reset */
	phyhost &= ~(HOST_CTRL0_PHYSWRST |
			HOST_CTRL0_PHYSWRSTALL |
			HOST_CTRL0_SIDDQ |
			/* Enable normal mode of operation */
			HOST_CTRL0_FORCESUSPEND |
			HOST_CTRL0_FORCESLEEP);

	/* Link reset */
	phyhost |= (HOST_CTRL0_LINKSWRST |
			HOST_CTRL0_UTMISWRST |
			/* COMMON Block configuration during suspend */
			HOST_CTRL0_COMMONON_N);
	writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
	udelay(10);
	phyhost &= ~(HOST_CTRL0_LINKSWRST |
			HOST_CTRL0_UTMISWRST);
	writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);

	/* OTG configuration */
	phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS);

	/* phy reference clock configuration */
	phyotg &= ~OTG_SYS_FSEL_MASK;
	phyotg |= OTG_SYS_FSEL(phyclk);

	/* Enable normal mode of operation */
	phyotg &= ~(OTG_SYS_FORCESUSPEND |
			OTG_SYS_SIDDQ_UOTG |
			OTG_SYS_FORCESLEEP |
			OTG_SYS_REFCLKSEL_MASK |
			/* COMMON Block configuration during suspend */
			OTG_SYS_COMMON_ON);

	/* OTG phy & link reset */
	phyotg |= (OTG_SYS_PHY0_SWRST |
			OTG_SYS_LINKSWRST_UOTG |
			OTG_SYS_PHYLINK_SWRESET |
			OTG_SYS_OTGDISABLE |
			/* Set phy refclk */
			OTG_SYS_REFCLKSEL_CLKCORE);

	writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
	udelay(10);
	phyotg &= ~(OTG_SYS_PHY0_SWRST |
			OTG_SYS_LINKSWRST_UOTG |
			OTG_SYS_PHYLINK_SWRESET);
	writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);

	/* HSIC phy configuration */
	phyhsic = (HSIC_CTRL_REFCLKDIV_12 |
			HSIC_CTRL_REFCLKSEL |
			HSIC_CTRL_PHYSWRST);
	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
	udelay(10);
	phyhsic &= ~HSIC_CTRL_PHYSWRST;
	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);

	udelay(80);

	/* enable EHCI DMA burst */
	ehcictrl = readl(regs + EXYNOS5_PHY_HOST_EHCICTRL);
	ehcictrl |= (HOST_EHCICTRL_ENAINCRXALIGN |
				HOST_EHCICTRL_ENAINCR4 |
				HOST_EHCICTRL_ENAINCR8 |
				HOST_EHCICTRL_ENAINCR16);
	writel(ehcictrl, regs + EXYNOS5_PHY_HOST_EHCICTRL);

	/* set ohci_suspend_on_n */
	ohcictrl = readl(regs + EXYNOS5_PHY_HOST_OHCICTRL);
	ohcictrl |= HOST_OHCICTRL_SUSPLGCY;
	writel(ohcictrl, regs + EXYNOS5_PHY_HOST_OHCICTRL);
}

static void samsung_usbphy_enable(struct samsung_usbphy *sphy)
{
	void __iomem *regs = sphy->regs;
	u32 phypwr;
	u32 phyclk;
	u32 rstcon;

	/* set clock frequency for PLL */
	phyclk = sphy->ref_clk_freq;
	phypwr = readl(regs + SAMSUNG_PHYPWR);
	rstcon = readl(regs + SAMSUNG_RSTCON);

	switch (sphy->drv_data->cpu_type) {
	case TYPE_S3C64XX:
		phyclk &= ~PHYCLK_COMMON_ON_N;
		phypwr &= ~PHYPWR_NORMAL_MASK;
		rstcon |= RSTCON_SWRST;
		break;
	case TYPE_EXYNOS4210:
		phypwr &= ~PHYPWR_NORMAL_MASK_PHY0;
		rstcon |= RSTCON_SWRST;
	default:
		break;
	}

	writel(phyclk, regs + SAMSUNG_PHYCLK);
	/* Configure PHY0 for normal operation*/
	writel(phypwr, regs + SAMSUNG_PHYPWR);
	/* reset all ports of PHY and Link */
	writel(rstcon, regs + SAMSUNG_RSTCON);
	udelay(10);
	rstcon &= ~RSTCON_SWRST;
	writel(rstcon, regs + SAMSUNG_RSTCON);
}

static void samsung_exynos5_usbphy_disable(struct samsung_usbphy *sphy)
{
	void __iomem *regs = sphy->regs;
	u32 phyhost;
	u32 phyotg;
	u32 phyhsic;

	if (atomic_dec_return(&sphy->phy_usage) > 0) {
		dev_info(sphy->dev, "still being used\n");
		return;
	}

	phyhsic = (HSIC_CTRL_REFCLKDIV_12 |
			HSIC_CTRL_REFCLKSEL |
			HSIC_CTRL_SIDDQ |
			HSIC_CTRL_FORCESLEEP |
			HSIC_CTRL_FORCESUSPEND);
	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);

	phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
	phyhost |= (HOST_CTRL0_SIDDQ |
			HOST_CTRL0_FORCESUSPEND |
			HOST_CTRL0_FORCESLEEP |
			HOST_CTRL0_PHYSWRST |
			HOST_CTRL0_PHYSWRSTALL);
	writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);

	phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS);
	phyotg |= (OTG_SYS_FORCESUSPEND |
			OTG_SYS_SIDDQ_UOTG |
			OTG_SYS_FORCESLEEP);
	writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
}

static void samsung_usbphy_disable(struct samsung_usbphy *sphy)
{
	void __iomem *regs = sphy->regs;
	u32 phypwr;

	phypwr = readl(regs + SAMSUNG_PHYPWR);

	switch (sphy->drv_data->cpu_type) {
	case TYPE_S3C64XX:
		phypwr |= PHYPWR_NORMAL_MASK;
		break;
	case TYPE_EXYNOS4210:
		phypwr |= PHYPWR_NORMAL_MASK_PHY0;
	default:
		break;
	}

	/* Disable analog and otg block power */
	writel(phypwr, regs + SAMSUNG_PHYPWR);
}

/*
 * The function passed to the usb driver for phy initialization
 */
static int samsung_usbphy_init(struct usb_phy *phy)
{
	struct samsung_usbphy *sphy;
	struct usb_bus *host = NULL;
	unsigned long flags;
	int ret = 0;

	sphy = phy_to_sphy(phy);

	host = phy->otg->host;

	/* Enable the phy clock */
	ret = clk_prepare_enable(sphy->clk);
	if (ret) {
		dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
		return ret;
	}

	spin_lock_irqsave(&sphy->lock, flags);

	if (host) {
		/* setting default phy-type for USB 2.0 */
		if (!strstr(dev_name(host->controller), "ehci") ||
				!strstr(dev_name(host->controller), "ohci"))
			samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST);
	} else {
		samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
	}

	/* Disable phy isolation */
	if (sphy->plat && sphy->plat->pmu_isolation)
		sphy->plat->pmu_isolation(false);
	else
		samsung_usbphy_set_isolation(sphy, false);

	/* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */
	samsung_usbphy_cfg_sel(sphy);

	/* Initialize usb phy registers */
	if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
		samsung_exynos5_usbphy_enable(sphy);
	else
		samsung_usbphy_enable(sphy);

	spin_unlock_irqrestore(&sphy->lock, flags);

	/* Disable the phy clock */
	clk_disable_unprepare(sphy->clk);

	return ret;
}

/*
 * The function passed to the usb driver for phy shutdown
 */
static void samsung_usbphy_shutdown(struct usb_phy *phy)
{
	struct samsung_usbphy *sphy;
	struct usb_bus *host = NULL;
	unsigned long flags;

	sphy = phy_to_sphy(phy);

	host = phy->otg->host;

	if (clk_prepare_enable(sphy->clk)) {
		dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
		return;
	}

	spin_lock_irqsave(&sphy->lock, flags);

	if (host) {
		/* setting default phy-type for USB 2.0 */
		if (!strstr(dev_name(host->controller), "ehci") ||
				!strstr(dev_name(host->controller), "ohci"))
			samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST);
	} else {
		samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
	}

	/* De-initialize usb phy registers */
	if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
		samsung_exynos5_usbphy_disable(sphy);
	else
		samsung_usbphy_disable(sphy);

	/* Enable phy isolation */
	if (sphy->plat && sphy->plat->pmu_isolation)
		sphy->plat->pmu_isolation(true);
	else
		samsung_usbphy_set_isolation(sphy, true);

	spin_unlock_irqrestore(&sphy->lock, flags);

	clk_disable_unprepare(sphy->clk);
}

static const struct of_device_id samsung_usbphy_dt_match[];

static inline const struct samsung_usbphy_drvdata
*samsung_usbphy_get_driver_data(struct platform_device *pdev)
{
	if (pdev->dev.of_node) {
		const struct of_device_id *match;
		match = of_match_node(samsung_usbphy_dt_match,
							pdev->dev.of_node);
		return match->data;
	}

	return (struct samsung_usbphy_drvdata *)
				platform_get_device_id(pdev)->driver_data;
}

static int samsung_usbphy_probe(struct platform_device *pdev)
{
	struct samsung_usbphy *sphy;
	struct usb_otg *otg;
	struct samsung_usbphy_data *pdata = pdev->dev.platform_data;
	const struct samsung_usbphy_drvdata *drv_data;
	struct device *dev = &pdev->dev;
	struct resource *phy_mem;
	void __iomem	*phy_base;
	struct clk *clk;
	int ret;

	phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!phy_mem) {
		dev_err(dev, "%s: missing mem resource\n", __func__);
		return -ENODEV;
	}

	phy_base = devm_ioremap_resource(dev, phy_mem);
	if (IS_ERR(phy_base))
		return PTR_ERR(phy_base);

	sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
	if (!sphy)
		return -ENOMEM;

	otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL);
	if (!otg)
		return -ENOMEM;

	drv_data = samsung_usbphy_get_driver_data(pdev);

	if (drv_data->cpu_type == TYPE_EXYNOS5250)
		clk = devm_clk_get(dev, "usbhost");
	else
		clk = devm_clk_get(dev, "otg");

	if (IS_ERR(clk)) {
		dev_err(dev, "Failed to get otg clock\n");
		return PTR_ERR(clk);
	}

	sphy->dev = dev;

	if (dev->of_node) {
		ret = samsung_usbphy_parse_dt(sphy);
		if (ret < 0)
			return ret;
	} else {
		if (!pdata) {
			dev_err(dev, "no platform data specified\n");
			return -EINVAL;
		}
	}

	sphy->plat		= pdata;
	sphy->regs		= phy_base;
	sphy->clk		= clk;
	sphy->drv_data		= drv_data;
	sphy->phy.dev		= sphy->dev;
	sphy->phy.label		= "samsung-usbphy";
	sphy->phy.init		= samsung_usbphy_init;
	sphy->phy.shutdown	= samsung_usbphy_shutdown;
	sphy->ref_clk_freq	= samsung_usbphy_get_refclk_freq(sphy);

	sphy->phy.otg		= otg;
	sphy->phy.otg->phy	= &sphy->phy;
	sphy->phy.otg->set_host = samsung_usbphy_set_host;

	spin_lock_init(&sphy->lock);

	platform_set_drvdata(pdev, sphy);

	return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2);
}

static int samsung_usbphy_remove(struct platform_device *pdev)
{
	struct samsung_usbphy *sphy = platform_get_drvdata(pdev);

	usb_remove_phy(&sphy->phy);

	if (sphy->pmuregs)
		iounmap(sphy->pmuregs);
	if (sphy->sysreg)
		iounmap(sphy->sysreg);

	return 0;
}

static const struct samsung_usbphy_drvdata usbphy_s3c64xx = {
	.cpu_type		= TYPE_S3C64XX,
	.devphy_en_mask		= S3C64XX_USBPHY_ENABLE,
};

static const struct samsung_usbphy_drvdata usbphy_exynos4 = {
	.cpu_type		= TYPE_EXYNOS4210,
	.devphy_en_mask		= EXYNOS_USBPHY_ENABLE,
	.hostphy_en_mask	= EXYNOS_USBPHY_ENABLE,
};

static struct samsung_usbphy_drvdata usbphy_exynos5 = {
	.cpu_type		= TYPE_EXYNOS5250,
	.hostphy_en_mask	= EXYNOS_USBPHY_ENABLE,
	.hostphy_reg_offset	= EXYNOS_USBHOST_PHY_CTRL_OFFSET,
};

#ifdef CONFIG_OF
static const struct of_device_id samsung_usbphy_dt_match[] = {
	{
		.compatible = "samsung,s3c64xx-usbphy",
		.data = &usbphy_s3c64xx,
	}, {
		.compatible = "samsung,exynos4210-usbphy",
		.data = &usbphy_exynos4,
	}, {
		.compatible = "samsung,exynos5250-usbphy",
		.data = &usbphy_exynos5
	},
	{},
};
MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match);
#endif

static struct platform_device_id samsung_usbphy_driver_ids[] = {
	{
		.name		= "s3c64xx-usbphy",
		.driver_data	= (unsigned long)&usbphy_s3c64xx,
	}, {
		.name		= "exynos4210-usbphy",
		.driver_data	= (unsigned long)&usbphy_exynos4,
	}, {
		.name		= "exynos5250-usbphy",
		.driver_data	= (unsigned long)&usbphy_exynos5,
	},
	{},
};

MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids);

static struct platform_driver samsung_usbphy_driver = {
	.probe		= samsung_usbphy_probe,
	.remove		= samsung_usbphy_remove,
	.id_table	= samsung_usbphy_driver_ids,
	.driver		= {
		.name	= "samsung-usbphy",
		.owner	= THIS_MODULE,
		.of_match_table = of_match_ptr(samsung_usbphy_dt_match),
	},
};

module_platform_driver(samsung_usbphy_driver);

MODULE_DESCRIPTION("Samsung USB phy controller");
MODULE_AUTHOR("Praveen Paneri <p.paneri@samsung.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:samsung-usbphy");