aboutsummaryrefslogtreecommitdiffstats
path: root/sound/pci/azt3328.h
blob: 7e0e791809773b1f2e5e5e6aa0a924357d0a01b5 (plain) (blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
#ifndef __SOUND_AZF3328_H
#define __SOUND_AZF3328_H

/* type argument to use for the I/O functions */
#define WORD_VALUE      0x1000
#define DWORD_VALUE     0x2000
#define BYTE_VALUE      0x4000

/*** main I/O area port indices ***/
/* (only 0x70 of 0x80 bytes saved/restored by Windows driver) */
/* the driver initialisation suggests a layout of 3 main areas:
 * from 0x00 (playback), from 0x20 (recording) and from 0x40 (maybe DirectX
 * timer ???). and probably another area from 0x60 to 0x6f
 * (IRQ management, power management etc. ???). */
/* playback area */
#define IDX_IO_PLAY_FLAGS       0x00
     /* able to reactivate output after output muting due to 8/16bit
      * output change, just like 0x0002.
      * 0x0001 is the only bit that's able to start the DMA counter */
  #define DMA_RESUME			0x0001 /* paused if cleared ? */
     /* 0x0002 *temporarily* set during DMA stopping. hmm
      * both 0x0002 and 0x0004 set in playback setup. */
     /* able to reactivate output after output muting due to 8/16bit
      * output change, just like 0x0001. */
  #define DMA_PLAY_SOMETHING1		0x0002 /* \ alternated (toggled) */
     /* 0x0004: NOT able to reactivate output */
  #define DMA_PLAY_SOMETHING2		0x0004 /* / bits */
  #define SOMETHING_ALMOST_ALWAYS_SET	0x0008 /* ???; can be modified */
  #define DMA_EPILOGUE_SOMETHING	0x0010
  #define DMA_SOMETHING_ELSE		0x0020 /* ??? */
  #define SOMETHING_UNMODIFIABLE	0xffc0 /* unused ? not modifiable */
#define IDX_IO_PLAY_IRQMASK     0x02
  /* write back to flags in case flags are set, in order to ACK IRQ in handler
   * (bit 1 of port 0x64 indicates interrupt for one of these three types)
   * sometimes in this case it just writes 0xffff to globally ACK all IRQs
   * settings written are not reflected when reading back, though.
   * seems to be IRQ, too (frequently used: port |= 0x07 !), but who knows ? */
  #define IRQ_PLAY_SOMETHING		0x0001 /* something & ACK */
  #define IRQ_FINISHED_PLAYBUF_1	0x0002 /* 1st dmabuf finished & ACK */
  #define IRQ_FINISHED_PLAYBUF_2	0x0004 /* 2nd dmabuf finished & ACK */
  #define IRQMASK_SOME_STATUS_1		0x0008 /* \ related bits */
  #define IRQMASK_SOME_STATUS_2		0x0010 /* / (checked together in loop) */
  #define IRQMASK_UNMODIFIABLE		0xffe0 /* unused ? not modifiable */
#define IDX_IO_PLAY_DMA_START_1 0x04 /* start address of 1st DMA play area */
#define IDX_IO_PLAY_DMA_START_2 0x08 /* start address of 2nd DMA play area */
#define IDX_IO_PLAY_DMA_LEN_1   0x0c /* length of 1st DMA play area */
#define IDX_IO_PLAY_DMA_LEN_2   0x0e /* length of 2nd DMA play area */
#define IDX_IO_PLAY_DMA_CURRPOS 0x10 /* current DMA position  */
#define IDX_IO_PLAY_DMA_CURROFS	0x14 /* offset within current DMA play area */
#define IDX_IO_PLAY_SOUNDFORMAT 0x16
  /* all unspecified bits can't be modified */
  #define SOUNDFORMAT_FREQUENCY_MASK	0x000f
    /* all _SUSPECTED_ values are not used by Windows drivers, so we don't
     * have any hard facts, only rough measurements */
    #define SOUNDFORMAT_FREQ_SUSPECTED_4000	0x0c
    #define SOUNDFORMAT_FREQ_SUSPECTED_4800	0x0a
    #define SOUNDFORMAT_FREQ_5510		0x0d
    #define SOUNDFORMAT_FREQ_6620		0x0b
    #define SOUNDFORMAT_FREQ_8000		0x00 /* also 0x0e ? */
    #define SOUNDFORMAT_FREQ_9600		0x08
    #define SOUNDFORMAT_FREQ_SUSPECTED_12000	0x09
    #define SOUNDFORMAT_FREQ_11025		0x01 /* also 0x0f ? */
    #define SOUNDFORMAT_FREQ_16000		0x02
    #define SOUNDFORMAT_FREQ_22050		0x03
    #define SOUNDFORMAT_FREQ_32000		0x04
    #define SOUNDFORMAT_FREQ_44100		0x05
    #define SOUNDFORMAT_FREQ_48000		0x06
    #define SOUNDFORMAT_FREQ_SUSPECTED_64000	0x07
  #define SOUNDFORMAT_FLAG_16BIT	0x0010
  #define SOUNDFORMAT_FLAG_2CHANNELS	0x0020
/* recording area (see also: playback bit flag definitions) */
#define IDX_IO_REC_FLAGS	0x20 /* ?? */
#define IDX_IO_REC_IRQMASK	0x22 /* ?? */
  #define IRQ_REC_SOMETHING		0x0001 /* something & ACK */
  #define IRQ_FINISHED_RECBUF_1		0x0002 /* 1st dmabuf finished & ACK */
  #define IRQ_FINISHED_RECBUF_2		0x0004 /* 2nd dmabuf finished & ACK */
  /* hmm, maybe these are just the corresponding *recording* flags ?
   * but OTOH they are most likely at port 0x22 instead */
  #define IRQMASK_SOME_STATUS_1		0x0008 /* \ related bits */
  #define IRQMASK_SOME_STATUS_2		0x0010 /* / (checked together in loop) */
#define IDX_IO_REC_DMA_START_1  0x24
#define IDX_IO_REC_DMA_START_2  0x28
#define IDX_IO_REC_DMA_LEN_1    0x2c
#define IDX_IO_REC_DMA_LEN_2    0x2e
#define IDX_IO_REC_DMA_CURRPOS  0x30
#define IDX_IO_REC_DMA_CURROFS  0x34
#define IDX_IO_REC_SOUNDFORMAT  0x36
/* some third area ? (after playback and recording) */
#define IDX_IO_SOMETHING_FLAGS	0x40 /* gets set to 0x34 just like port 0x0 and 0x20 on card init */
/* general */
#define IDX_IO_60H		0x60 /* writing 0xffff returns 0xffff */
#define IDX_IO_62H		0x62 /* writing to WORD 0x0062 can hang the box ! --> responsible for IRQ management as a whole ?? */
#define IDX_IO_IRQ63H		0x63 /* FIXME !! */
  #define IO_IRQ63H_SOMETHING		0x04 /* being set in IRQ handler in case port 0x00 had 0x0020 set upon IRQ handler */
#define IDX_IO_IRQSTATUS        0x64
  #define IRQ_PLAYBACK			0x0001
  #define IRQ_RECORDING			0x0002
  #define IRQ_MPU401			0x0010
  #define IRQ_SOMEIRQ			0x0020 /* ???? */
  #define IRQ_WHO_KNOWS_UNUSED		0x00e0 /* probably unused */
#define IDX_IO_66H		0x66    /* writing 0xffff returns 0x0000 */
#define IDX_IO_SOME_VALUE	0x68	/* this is always set to 0x3ff, and writable; maybe some buffer limit, but I couldn't find out more */
#define IDX_IO_6AH		0x6A	/* this WORD can be set to have bits 0x0028 activated; actually inhibits PCM playback !!! maybe power management ?? */
#define IDX_IO_6CH		0x6C	/* this WORD can have all its bits activated ? */
#define IDX_IO_6EH		0x6E	/* writing 0xffff returns 0x83fe */
/* further I/O indices not saved/restored, so probably not used */

/*** I/O 2 area port indices ***/
/* (only 0x06 of 0x08 bytes saved/restored by Windows driver) */ 
#define IDX_IO2_LEGACY_ADDR	0x04
  #define LEGACY_SOMETHING		0x01 /* OPL3 ?? */
  #define LEGACY_JOY			0x08

/*** mixer I/O area port indices ***/
/* (only 0x22 of 0x40 bytes saved/restored by Windows driver)
 * generally spoken: AC97 register index = AZF3328 mixer reg index + 2
 * (in other words: AZF3328 NOT fully AC97 compliant) */
  #define MIXER_VOLUME_RIGHT_MASK	0x001f
  #define MIXER_VOLUME_LEFT_MASK	0x1f00
  #define MIXER_MUTE_MASK		0x8000
#define IDX_MIXER_RESET		0x00 /* does NOT seem to have AC97 ID bits */
#define IDX_MIXER_PLAY_MASTER   0x02
#define IDX_MIXER_MODEMOUT      0x04
#define IDX_MIXER_BASSTREBLE    0x06
  #define MIXER_BASSTREBLE_TREBLE_VOLUME_MASK	0x000e
  #define MIXER_BASSTREBLE_BASS_VOLUME_MASK	0x0e00
#define IDX_MIXER_PCBEEP        0x08
#define IDX_MIXER_MODEMIN       0x0a
#define IDX_MIXER_MIC           0x0c
  #define MIXER_MIC_MICGAIN_20DB_ENHANCEMENT_MASK	0x0040
#define IDX_MIXER_LINEIN        0x0e
#define IDX_MIXER_CDAUDIO       0x10
#define IDX_MIXER_VIDEO         0x12
#define IDX_MIXER_AUX           0x14
#define IDX_MIXER_WAVEOUT       0x16
#define IDX_MIXER_FMSYNTH       0x18
#define IDX_MIXER_REC_SELECT    0x1a
  #define MIXER_REC_SELECT_MIC		0x00
  #define MIXER_REC_SELECT_CD		0x01
  #define MIXER_REC_SELECT_VIDEO	0x02
  #define MIXER_REC_SELECT_AUX		0x03
  #define MIXER_REC_SELECT_LINEIN	0x04
  #define MIXER_REC_SELECT_MIXSTEREO	0x05
  #define MIXER_REC_SELECT_MIXMONO	0x06
  #define MIXER_REC_SELECT_MONOIN	0x07
#define IDX_MIXER_REC_VOLUME    0x1c
#define IDX_MIXER_ADVCTL1       0x1e
  /* unlisted bits are unmodifiable */
  #define MIXER_ADVCTL1_3DWIDTH_MASK	0x000e
  #define MIXER_ADVCTL1_HIFI3D_MASK	0x0300
#define IDX_MIXER_ADVCTL2       0x20 /* resembles AC97_GENERAL_PURPOSE reg ! */
  /* unlisted bits are unmodifiable */
  #define MIXER_ADVCTL2_BIT7		0x0080 /* WaveOut 3D Bypass ? mutes WaveOut at LineOut */
  #define MIXER_ADVCTL2_BIT8		0x0100 /* is this Modem Out Select ? */
  #define MIXER_ADVCTL2_BIT9		0x0200 /* Mono Select Source ? */
  #define MIXER_ADVCTL2_BIT13		0x2000 /* 3D enable ? */
  #define MIXER_ADVCTL2_BIT15		0x8000 /* unknown */
  
#define IDX_MIXER_SOMETHING30H	0x30 /* used, but unknown ??? */

/* driver internal flags */
#define SET_CHAN_LEFT	1
#define SET_CHAN_RIGHT	2

#endif /* __SOUND_AZF3328_H  */