diff options
| author |   Icenowy Zheng <uwu@icenowy.me> | 2025-04-24 14:06:05 +0800 |
|---|---|---|
| committer |   Conor Dooley <conor.dooley@microchip.com> | 2025-05-15 21:06:04 +0100 |
| commit | 71385a893cea3e3bc752aa75e3e616073cda7889 (patch) | |
| tree | a534b07f0935d25de754ce8e4703dcd3b341b82a | |
| parent | riscv: dts: starfive: fml13v01: enable USB 3.0 port (diff) | |
| download | linux-rng-71385a893cea3e3bc752aa75e3e616073cda7889.tar.xz linux-rng-71385a893cea3e3bc752aa75e3e616073cda7889.zip | |
riscv: dts: starfive: jh7110-common: use macros for MMC0 pins
The pin names of MMC0 pinmux is defined in the pinctrl dt binding header
associated with starfive,jh7110-pinctrl .
Include the header file and use these names instead of raw numbers for
defining MMC0 pinmux.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
| -rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 21 |
1 files changed, 11 insertions, 10 deletions
diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi index c2f70f5e2918..a2c72b385a90 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi @@ -8,6 +8,7 @@ #include "jh7110.dtsi" #include "jh7110-pinfunc.h" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/starfive,jh7110-pinctrl.h> / { aliases { @@ -428,16 +429,16 @@ }; mmc-pins { - pinmux = <PINMUX(64, 0)>, - <PINMUX(65, 0)>, - <PINMUX(66, 0)>, - <PINMUX(67, 0)>, - <PINMUX(68, 0)>, - <PINMUX(69, 0)>, - <PINMUX(70, 0)>, - <PINMUX(71, 0)>, - <PINMUX(72, 0)>, - <PINMUX(73, 0)>; + pinmux = <PINMUX(PAD_SD0_CLK, 0)>, + <PINMUX(PAD_SD0_CMD, 0)>, + <PINMUX(PAD_SD0_DATA0, 0)>, + <PINMUX(PAD_SD0_DATA1, 0)>, + <PINMUX(PAD_SD0_DATA2, 0)>, + <PINMUX(PAD_SD0_DATA3, 0)>, + <PINMUX(PAD_SD0_DATA4, 0)>, + <PINMUX(PAD_SD0_DATA5, 0)>, + <PINMUX(PAD_SD0_DATA6, 0)>, + <PINMUX(PAD_SD0_DATA7, 0)>; bias-pull-up; drive-strength = <12>; input-enable; |