dt-bindings: interrupt-controller: Convert snps,archs-idu-intc to DT schema

Convert the ARC-HS Interrupt Distribution Unit interrupt controller
binding to schema format. It's a straight-forward conversion of the
typical interrupt controller.

Link: https://lore.kernel.org/r/20250505144830.1292495-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

2 files changed, 48 insertions, 46 deletions

diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
deleted file mode 100644
index a5c1db95b3ec..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-* ARC-HS Interrupt Distribution Unit
-
-  This optional 2nd level interrupt controller can be used in SMP configurations
-  for dynamic IRQ routing, load balancing of common/external IRQs towards core
-  intc.
-
-Properties:
-
-- compatible: "snps,archs-idu-intc"
-- interrupt-controller: This is an interrupt controller.
-- #interrupt-cells: Must be <1> or <2>.
-
-  Value of the first cell specifies the "common" IRQ from peripheral to IDU.
-  Number N of the particular interrupt line of IDU corresponds to the line N+24
-  of the core interrupt controller.
-
-  The (optional) second cell specifies any of the following flags:
-    - bits[3:0] trigger type and level flags
-        1 = low-to-high edge triggered
-        2 = NOT SUPPORTED (high-to-low edge triggered)
-        4 = active high level-sensitive <<< DEFAULT
-        8 = NOT SUPPORTED (active low level-sensitive)
-  When no second cell is specified, the interrupt is assumed to be level
-  sensitive.
-
-  The interrupt controller is accessed via the special ARC AUX register
-  interface, hence "reg" property is not specified.
-
-Example:
-	core_intc: core-interrupt-controller {
-		compatible = "snps,archs-intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-	};
-
-	idu_intc: idu-interrupt-controller {
-		compatible = "snps,archs-idu-intc";
-		interrupt-controller;
-		interrupt-parent = <&core_intc>;
-		#interrupt-cells = <1>;
-	};
-
-	some_device: serial@c0fc1000 {
-		interrupt-parent = <&idu_intc>;
-		interrupts = <0>;	/* upstream idu IRQ #24 */
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.yaml
new file mode 100644
index 000000000000..286a964f23e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/snps,archs-idu-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARC-HS Interrupt Distribution Unit
+
+maintainers:
+  - Vineet Gupta <vgupta@kernel.org>
+
+description: >
+  ARC-HS Interrupt Distribution Unit is an optional 2nd level interrupt
+  controller which can be used in SMP configurations for dynamic IRQ routing,
+  load balancing of common/external IRQs towards core intc.
+
+  The interrupt controller is accessed via the special ARC AUX register
+  interface, hence "reg" property is not specified.
+
+properties:
+  compatible:
+    const: snps,archs-idu-intc
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description: |
+      Number of interrupt specifier cells:
+        - 1: only a common IRQ is specified.
+        - 2: a second cell encodes trigger type and level flags:
+            1 = low-to-high edge triggered
+            4 = active high level-sensitive (default)
+    enum: [1, 2]
+
+required:
+  - compatible
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller {
+        compatible = "snps,archs-idu-intc";
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };