Merge tag 'riscv-mw2-6.16-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux into for-next

riscv patches for 6.16-rc1, part 2

* Performance improvements
  - Add support for vdso getrandom
  - Implement raid6 calculations using vectors
  - Introduce svinval tlb invalidation

* Cleanup
  - A bunch of deduplication of the macros we use for manipulating instructions

* Misc
  - Introduce a kunit test for kprobes
  - Add support for mseal as riscv fits the requirements (thanks to Lorenzo for making sure of that :))

[Palmer: There was a rebase between part 1 and part 2, so I've had to do
some more git surgery here... at least two rounds of surgery...]

* alex-pr-2: (866 commits)
  RISC-V: vDSO: Wire up getrandom() vDSO implementation
  riscv: enable mseal sysmap for RV64
  raid6: Add RISC-V SIMD syndrome and recovery calculations
  riscv: mm: Add support for Svinval extension
  riscv: Add kprobes KUnit test
  riscv: kprobes: Remove duplication of RV_EXTRACT_ITYPE_IMM
  riscv: kprobes: Remove duplication of RV_EXTRACT_UTYPE_IMM
  riscv: kprobes: Remove duplication of RV_EXTRACT_RD_REG
  riscv: kprobes: Remove duplication of RVC_EXTRACT_BTYPE_IMM
  riscv: kprobes: Remove duplication of RVC_EXTRACT_C2_RS1_REG
  riscv: kproves: Remove duplication of RVC_EXTRACT_JTYPE_IMM
  riscv: kprobes: Remove duplication of RV_EXTRACT_BTYPE_IMM
  riscv: kprobes: Remove duplication of RV_EXTRACT_RS1_REG
  riscv: kprobes: Remove duplication of RV_EXTRACT_JTYPE_IMM
  riscv: kprobes: Move branch_funct3 to insn.h
  riscv: kprobes: Move branch_rs2_idx to insn.h
  Linux 6.15-rc6
  Input: xpad - fix xpad_device sorting
  Input: xpad - add support for several more controllers
  Input: xpad - fix Share button on Xbox One controllers
  ...

6 files changed, 128 insertions, 21 deletions

diff --git a/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml b/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml
index 517a4ac1bea3..e365413732e7 100644
--- a/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml
+++ b/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Mediatek's Keypad Controller
 
 maintainers:
-  - Mattijs Korpershoek <mkorpershoek@baylibre.com>
+  - Mattijs Korpershoek <mkorpershoek@kernel.org>
 
 allOf:
   - $ref: /schemas/input/matrix-keymap.yaml#
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index 45819b235800..a2d4c626f659 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -74,19 +74,17 @@ properties:
       - rev-rmii
       - moca
 
-      # RX and TX delays are added by the MAC when required
+      # RX and TX delays are provided by the PCB. See below
       - rgmii
 
-      # RGMII with internal RX and TX delays provided by the PHY,
-      # the MAC should not add the RX or TX delays in this case
+      # RX and TX delays are not provided by the PCB. This is the most
+      # frequent case. See below
       - rgmii-id
 
-      # RGMII with internal RX delay provided by the PHY, the MAC
-      # should not add an RX delay in this case
+      # TX delay is provided by the PCB. See below
       - rgmii-rxid
 
-      # RGMII with internal TX delay provided by the PHY, the MAC
-      # should not add an TX delay in this case
+      # RX delay is provided by the PCB. See below
       - rgmii-txid
       - rtbi
       - smii
@@ -286,4 +284,89 @@ allOf:
 
 additionalProperties: true
 
+# Informative
+# ===========
+#
+# 'phy-modes' & 'phy-connection-type' properties 'rgmii', 'rgmii-id',
+# 'rgmii-rxid', and 'rgmii-txid' are frequently used wrongly by
+# developers. This informative section clarifies their usage.
+#
+# The RGMII specification requires a 2ns delay between the data and
+# clock signals on the RGMII bus. How this delay is implemented is not
+# specified.
+#
+# One option is to make the clock traces on the PCB longer than the
+# data traces. A sufficiently difference in length can provide the 2ns
+# delay. If both the RX and TX delays are implemented in this manner,
+# 'rgmii' should be used, so indicating the PCB adds the delays.
+#
+# If the PCB does not add these delays via extra long traces,
+# 'rgmii-id' should be used. Here, 'id' refers to 'internal delay',
+# where either the MAC or PHY adds the delay.
+#
+# If only one of the two delays are implemented via extra long clock
+# lines, either 'rgmii-rxid' or 'rgmii-txid' should be used,
+# indicating the MAC or PHY should implement one of the delays
+# internally, while the PCB implements the other delay.
+#
+# Device Tree describes hardware, and in this case, it describes the
+# PCB between the MAC and the PHY, if the PCB implements delays or
+# not.
+#
+# In practice, very few PCBs make use of extra long clock lines. Hence
+# any RGMII phy mode other than 'rgmii-id' is probably wrong, and is
+# unlikely to be accepted during review without details provided in
+# the commit description and comments in the .dts file.
+#
+# When the PCB does not implement the delays, the MAC or PHY must.  As
+# such, this is software configuration, and so not described in Device
+# Tree.
+#
+# The following describes how Linux implements the configuration of
+# the MAC and PHY to add these delays when the PCB does not. As stated
+# above, developers often get this wrong, and the aim of this section
+# is reduce the frequency of these errors by Linux developers. Other
+# users of the Device Tree may implement it differently, and still be
+# consistent with both the normative and informative description
+# above.
+#
+# By default in Linux, when using phylib/phylink, the MAC is expected
+# to read the 'phy-mode' from Device Tree, not implement any delays,
+# and pass the value to the PHY. The PHY will then implement delays as
+# specified by the 'phy-mode'. The PHY should always be reconfigured
+# to implement the needed delays, replacing any setting performed by
+# strapping or the bootloader, etc.
+#
+# Experience to date is that all PHYs which implement RGMII also
+# implement the ability to add or not add the needed delays. Hence
+# this default is expected to work in all cases. Ignoring this default
+# is likely to be questioned by Reviews, and require a strong argument
+# to be accepted.
+#
+# There are a small number of cases where the MAC has hard coded
+# delays which cannot be disabled. The 'phy-mode' only describes the
+# PCB.  The inability to disable the delays in the MAC does not change
+# the meaning of 'phy-mode'. It does however mean that a 'phy-mode' of
+# 'rgmii' is now invalid, it cannot be supported, since both the PCB
+# and the MAC and PHY adding delays cannot result in a functional
+# link. Thus the MAC should report a fatal error for any modes which
+# cannot be supported. When the MAC implements the delay, it must
+# ensure that the PHY does not also implement the same delay. So it
+# must modify the phy-mode it passes to the PHY, removing the delay it
+# has added. Failure to remove the delay will result in a
+# non-functioning link.
+#
+# Sometimes there is a need to fine tune the delays. Often the MAC or
+# PHY can perform this fine tuning. In the MAC node, the Device Tree
+# properties 'rx-internal-delay-ps' and 'tx-internal-delay-ps' should
+# be used to indicate fine tuning performed by the MAC. The values
+# expected here are small. A value of 2000ps, i.e 2ns, and a phy-mode
+# of 'rgmii' will not be accepted by Reviewers.
+#
+# If the PHY is to perform fine tuning, the properties
+# 'rx-internal-delay-ps' and 'tx-internal-delay-ps' in the PHY node
+# should be used. When the PHY is implementing delays, e.g. 'rgmii-id'
+# these properties should have a value near to 2000ps. If the PCB is
+# implementing delays, e.g. 'rgmii', a small value can be used to fine
+# tune the delay added by the PCB.
 ...
diff --git a/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml b/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml
index 8b3826243ddd..38e3ad50ff4f 100644
--- a/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml
+++ b/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml
@@ -27,7 +27,7 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32-array
     items:
       - minimum: 0
-        maximum: 7
+        maximum: 31
         description:
           Offset in bit within the address range specified by reg.
       - minimum: 1
diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
index 39c209249c9c..3f6dc6a3a9f1 100644
--- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
+++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
@@ -19,6 +19,7 @@ properties:
       - enum:
           - qcom,apq8064-qfprom
           - qcom,apq8084-qfprom
+          - qcom,ipq5018-qfprom
           - qcom,ipq5332-qfprom
           - qcom,ipq5424-qfprom
           - qcom,ipq6018-qfprom
@@ -28,6 +29,8 @@ properties:
           - qcom,msm8226-qfprom
           - qcom,msm8916-qfprom
           - qcom,msm8917-qfprom
+          - qcom,msm8937-qfprom
+          - qcom,msm8960-qfprom
           - qcom,msm8974-qfprom
           - qcom,msm8976-qfprom
           - qcom,msm8996-qfprom
@@ -51,6 +54,7 @@ properties:
           - qcom,sm8450-qfprom
           - qcom,sm8550-qfprom
           - qcom,sm8650-qfprom
+          - qcom,x1e80100-qfprom
       - const: qcom,qfprom
 
   reg:
diff --git a/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml b/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml
index a44d44b32809..dc89020b0950 100644
--- a/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml
+++ b/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml
@@ -14,6 +14,7 @@ properties:
     enum:
       - rockchip,px30-otp
       - rockchip,rk3308-otp
+      - rockchip,rk3576-otp
       - rockchip,rk3588-otp
 
   reg:
@@ -62,6 +63,8 @@ allOf:
       properties:
         clocks:
           maxItems: 3
+        clock-names:
+          maxItems: 3
         resets:
           maxItems: 1
         reset-names:
@@ -73,11 +76,33 @@ allOf:
         compatible:
           contains:
             enum:
+              - rockchip,rk3576-otp
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          maxItems: 3
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: otp
+            - const: apb
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - rockchip,rk3588-otp
     then:
       properties:
         clocks:
           minItems: 4
+        clock-names:
+          minItems: 4
         resets:
           minItems: 3
         reset-names:
diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
index bccd00a1ddd0..53d00ca643b3 100644
--- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
+++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
@@ -56,19 +56,18 @@ properties:
         enum:
           - snps,dw-apb-ssi
           - snps,dwc-ssi-1.01a
-      - description: Microsemi Ocelot/Jaguar2 SoC SPI Controller
-        items:
-          - enum:
-              - mscc,ocelot-spi
-              - mscc,jaguar2-spi
-          - const: snps,dw-apb-ssi
       - description: Microchip Sparx5 SoC SPI Controller
         const: microchip,sparx5-spi
       - description: Amazon Alpine SPI Controller
         const: amazon,alpine-dw-apb-ssi
-      - description: Renesas RZ/N1 SPI Controller
+      - description: Vendor controllers which use snps,dw-apb-ssi as fallback
         items:
-          - const: renesas,rzn1-spi
+          - enum:
+              - mscc,ocelot-spi
+              - mscc,jaguar2-spi
+              - renesas,rzn1-spi
+              - sophgo,sg2042-spi
+              - thead,th1520-spi
           - const: snps,dw-apb-ssi
       - description: Intel Keem Bay SPI Controller
         const: intel,keembay-ssi
@@ -88,10 +87,6 @@ properties:
               - renesas,r9a06g032-spi # RZ/N1D
               - renesas,r9a06g033-spi # RZ/N1S
           - const: renesas,rzn1-spi   # RZ/N1
-      - description: T-HEAD TH1520 SoC SPI Controller
-        items:
-          - const: thead,th1520-spi
-          - const: snps,dw-apb-ssi
 
   reg:
     minItems: 1