Merge tag 'soc-drivers-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC driver updates from Arnd Bergmann:
 "Updates are across the usual driver subsystems with SoC specific
  drivers:

   - added soc specicific drivers for sophgo cv1800 and sg2044, qualcomm
     sm8750, and amlogic c3 and s4 chips.

   - cache controller updates for sifive chips, plus binding changes for
     other cache descriptions.

   - memory controller drivers for mediatek mt6893, stm32 and cleanups
     for a few more drivers

   - reset controller drivers for T-Head TH1502, Sophgo sg2044 and
     Renesas RZ/V2H(P)

   - SCMI firmware updates to better deal with buggy firmware, plus
     better support for Qualcomm X1E and NXP i.MX specific interfaces

   - a new platform driver for the crypto firmware on Cznic Turris
     Omnia/MOX

   - cleanups for the TEE firmware subsystem and amdtee driver

   - minor updates and fixes for freescale/nxp, qualcomm, google,
     aspeed, wondermedia, ti, nxp, renesas, hisilicon, mediatek,
     broadcom and samsung SoCs"

* tag 'soc-drivers-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (133 commits)
  soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop()
  soc: aspeed: lpc: Fix impossible judgment condition
  ARM: aspeed: Don't select SRAM
  docs: firmware: qcom_scm: Fix kernel-doc warning
  soc: fsl: qe: Consolidate chained IRQ handler install/remove
  firmware: qcom: scm: Allow QSEECOM for HP EliteBook Ultra G1q
  dt-bindings: mfd: qcom,tcsr: Add compatible for ipq5018
  dt-bindings: cache: add QiLai compatible to ax45mp
  memory: stm32_omm: Fix error handling in stm32_omm_disable_child()
  dt-bindings: cache: Convert marvell,tauros2-cache to DT schema
  dt-bindings: cache: Convert marvell,{feroceon,kirkwood}-cache to DT schema
  soc: samsung: exynos-pmu: enable CPU hotplug support for gs101
  MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file
  dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle
  dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation
  bus: fsl-mc: Use strscpy() instead of strscpy_pad()
  soc: fsl: qbman: Remove const from portal->cgrs allocation type
  bus: fsl_mc: Fix driver_managed_dma check
  bus: fsl-mc: increase MC_CMD_COMPLETION_TIMEOUT_MS value
  bus: fsl-mc: drop useless cleanup
  ...

25 files changed, 766 insertions, 48 deletions

diff --git a/Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml b/Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml
index d2cbe49f4e15..4de5bb2e5f24 100644
--- a/Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml
+++ b/Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml
@@ -28,6 +28,9 @@ select:
 properties:
   compatible:
     items:
+      - enum:
+          - andestech,qilai-ax45mp-cache
+          - renesas,r9a07g043f-ax45mp-cache
       - const: andestech,ax45mp-cache
       - const: cache
 
@@ -65,12 +68,27 @@ required:
   - cache-size
   - cache-unified
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: andestech,qilai-ax45mp-cache
+
+    then:
+      properties:
+        cache-sets:
+          const: 2048
+        cache-size:
+          const: 2097152
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
 
     cache-controller@13400000 {
-        compatible = "andestech,ax45mp-cache", "cache";
+        compatible = "renesas,r9a07g043f-ax45mp-cache", "andestech,ax45mp-cache",
+                     "cache";
         reg = <0x13400000 0x100000>;
         interrupts = <508 IRQ_TYPE_LEVEL_HIGH>;
         cache-line-size = <64>;
diff --git a/Documentation/devicetree/bindings/cache/marvell,feroceon-cache.txt b/Documentation/devicetree/bindings/cache/marvell,feroceon-cache.txt
deleted file mode 100644
index 0d244b999d10..000000000000
--- a/Documentation/devicetree/bindings/cache/marvell,feroceon-cache.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-* Marvell Feroceon Cache
-
-Required properties:
-- compatible : Should be either "marvell,feroceon-cache" or
-  	       "marvell,kirkwood-cache".
-
-Optional properties:
-- reg        : Address of the L2 cache control register. Mandatory for
-  	       "marvell,kirkwood-cache", not used by "marvell,feroceon-cache"
-
-
-Example:
-		l2: l2-cache@20128 {
-			compatible = "marvell,kirkwood-cache";
-			reg = <0x20128 0x4>;
-		};
diff --git a/Documentation/devicetree/bindings/cache/marvell,kirkwood-cache.yaml b/Documentation/devicetree/bindings/cache/marvell,kirkwood-cache.yaml
new file mode 100644
index 000000000000..2bfa3c29f6a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/cache/marvell,kirkwood-cache.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cache/marvell,kirkwood-cache.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Feroceon/Kirkwood Cache
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+  compatible:
+    enum:
+      - marvell,feroceon-cache
+      - marvell,kirkwood-cache
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,kirkwood-cache
+    then:
+      required:
+        - reg
+    else:
+      properties:
+        reg: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    l2-cache@20128 {
+        compatible = "marvell,kirkwood-cache";
+        reg = <0x20128 0x4>;
+    };
diff --git a/Documentation/devicetree/bindings/cache/marvell,tauros2-cache.txt b/Documentation/devicetree/bindings/cache/marvell,tauros2-cache.txt
deleted file mode 100644
index 31af1cbb60bd..000000000000
--- a/Documentation/devicetree/bindings/cache/marvell,tauros2-cache.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* Marvell Tauros2 Cache
-
-Required properties:
-- compatible : Should be "marvell,tauros2-cache".
-- marvell,tauros2-cache-features : Specify the features supported for the
-  tauros2 cache.
-  The features including
-    CACHE_TAUROS2_PREFETCH_ON       (1 << 0)
-    CACHE_TAUROS2_LINEFILL_BURST8   (1 << 1)
-  The definition can be found at
-  arch/arm/include/asm/hardware/cache-tauros2.h
-
-Example:
-	L2: l2-cache {
-		compatible = "marvell,tauros2-cache";
-		marvell,tauros2-cache-features = <0x3>;
-	};
diff --git a/Documentation/devicetree/bindings/cache/marvell,tauros2-cache.yaml b/Documentation/devicetree/bindings/cache/marvell,tauros2-cache.yaml
new file mode 100644
index 000000000000..9f7f0d031631
--- /dev/null
+++ b/Documentation/devicetree/bindings/cache/marvell,tauros2-cache.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cache/marvell,tauros2-cache.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Tauros2 Cache
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+  compatible:
+    const: marvell,tauros2-cache
+
+  marvell,tauros2-cache-features:
+    description: >
+      Specify the features supported for the tauros2 cache. The features include:
+
+        - CACHE_TAUROS2_PREFETCH_ON (1 << 0)
+        - CACHE_TAUROS2_LINEFILL_BURST8 (1 << 1)
+
+      The definition can be found at arch/arm/include/asm/hardware/cache-tauros2.h
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 0x3
+
+required:
+  - compatible
+  - marvell,tauros2-cache-features
+
+additionalProperties: false
+
+examples:
+  - |
+    l2-cache {
+        compatible = "marvell,tauros2-cache";
+        marvell,tauros2-cache-features = <0x3>;
+    };
diff --git a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
index e5effbb4a606..37e3ebd55487 100644
--- a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
+++ b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
@@ -40,6 +40,7 @@ properties:
       - qcom,sm8450-llcc
       - qcom,sm8550-llcc
       - qcom,sm8650-llcc
+      - qcom,sm8750-llcc
       - qcom,x1e80100-llcc
 
   reg:
@@ -274,6 +275,7 @@ allOf:
               - qcom,sm8450-llcc
               - qcom,sm8550-llcc
               - qcom,sm8650-llcc
+              - qcom,sm8750-llcc
     then:
       properties:
         reg:
diff --git a/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml b/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml
index 7e8cebe21584..579bacb66f34 100644
--- a/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml
+++ b/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml
@@ -39,6 +39,7 @@ properties:
           - const: cache
       - items:
           - enum:
+              - eswin,eic7700-l3-cache
               - starfive,jh7100-ccache
               - starfive,jh7110-ccache
           - const: sifive,ccache0
@@ -55,10 +56,10 @@ properties:
     enum: [2, 3]
 
   cache-sets:
-    enum: [1024, 2048]
+    enum: [1024, 2048, 4096]
 
   cache-size:
-    const: 2097152
+    enum: [2097152, 4194304]
 
   cache-unified: true
 
@@ -89,6 +90,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - eswin,eic7700-l3-cache
               - sifive,fu740-c000-ccache
               - starfive,jh7100-ccache
               - starfive,jh7110-ccache
@@ -112,6 +114,22 @@ allOf:
       properties:
         compatible:
           contains:
+            const: eswin,eic7700-l3-cache
+
+    then:
+      properties:
+        cache-size:
+          const: 4194304
+
+    else:
+      properties:
+        cache-size:
+          const: 2097152
+
+  - if:
+      properties:
+        compatible:
+          contains:
             enum:
               - sifive,fu740-c000-ccache
               - starfive,jh7100-ccache
@@ -122,7 +140,15 @@ allOf:
         cache-sets:
           const: 2048
 
-    else:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,mpfs-ccache
+              - sifive,fu540-c000-ccache
+
+    then:
       properties:
         cache-sets:
           const: 1024
@@ -131,6 +157,18 @@ allOf:
       properties:
         compatible:
           contains:
+            enum:
+              - eswin,eic7700-l3-cache
+
+    then:
+      properties:
+        cache-sets:
+          const: 4096
+
+  - if:
+      properties:
+        compatible:
+          contains:
             const: sifive,ccache0
 
     then:
diff --git a/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml b/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml
index 2cdad1bbae73..9785aac3b5f3 100644
--- a/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml
+++ b/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml
@@ -27,6 +27,15 @@ properties:
   mboxes:
     maxItems: 1
 
+  pmic:
+    description: Child node describing the main PMIC.
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: samsung,s2mpg10-pmic
+
   shmem:
     description:
       List of phandle pointing to the shared memory (SHM) area. The memory
@@ -43,8 +52,34 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
     power-management {
         compatible = "google,gs101-acpm-ipc";
         mboxes = <&ap2apm_mailbox>;
         shmem = <&apm_sram>;
+
+        pmic {
+            compatible = "samsung,s2mpg10-pmic";
+            interrupts-extended = <&gpa0 6 IRQ_TYPE_LEVEL_LOW>;
+
+            regulators {
+                LDO1 {
+                    regulator-name = "vdd_ldo1";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-always-on;
+                };
+
+                // ...
+
+                BUCK1 {
+                    regulator-name = "vdd_mif";
+                    regulator-min-microvolt = <450000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                };
+            };
+        };
     };
diff --git a/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi.yaml b/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi.yaml
index 1a95010a546b..2bda2e0e1369 100644
--- a/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi.yaml
+++ b/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi.yaml
@@ -11,6 +11,18 @@ maintainers:
   - Peng Fan <peng.fan@nxp.com>
 
 properties:
+  protocol@80:
+    description:
+      SCMI LMM protocol which is for boot, shutdown, and reset of other logical
+      machines (LM). It is usually used to allow one LM to manage another used
+      as an offload or accelerator engine.
+    $ref: '/schemas/firmware/arm,scmi.yaml#/$defs/protocol-node'
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        const: 0x80
+
   protocol@81:
     $ref: '/schemas/firmware/arm,scmi.yaml#/$defs/protocol-node'
     unevaluatedProperties: false
@@ -19,6 +31,17 @@ properties:
       reg:
         const: 0x81
 
+  protocol@82:
+    description:
+      SCMI CPU Protocol which allows an agent to start or stop a CPU. It is
+      used to manage auxiliary CPUs in a LM.
+    $ref: '/schemas/firmware/arm,scmi.yaml#/$defs/protocol-node'
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        const: 0x82
+
   protocol@84:
     $ref: '/schemas/firmware/arm,scmi.yaml#/$defs/protocol-node'
     unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/hwinfo/via,vt8500-scc-id.yaml b/Documentation/devicetree/bindings/hwinfo/via,vt8500-scc-id.yaml
new file mode 100644
index 000000000000..b0f425a4a882
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwinfo/via,vt8500-scc-id.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwinfo/via,vt8500-scc-id.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VIA/WonderMedia SoC system configuration information
+
+maintainers:
+  - Alexey Charkov <alchark@gmail.com>
+
+description:
+  The system configuration controller on VIA/WonderMedia SoC's contains a chip
+  identifier and revision used to differentiate between different hardware
+  versions of on-chip IP blocks having their own peculiarities which may or
+  may not be captured by their respective DT compatible strings
+
+properties:
+  compatible:
+    items:
+      - const: via,vt8500-scc-id
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    chipid@d8120000 {
+        compatible = "via,vt8500-scc-id";
+        reg = <0xd8120000 0x4>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
index 2f36ac23604c..0762e0ff66ef 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
@@ -33,6 +33,7 @@ properties:
           - mediatek,mt2712-smi-common
           - mediatek,mt6779-smi-common
           - mediatek,mt6795-smi-common
+          - mediatek,mt6893-smi-common
           - mediatek,mt8167-smi-common
           - mediatek,mt8173-smi-common
           - mediatek,mt8183-smi-common
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
index 2381660b324c..2e7fac4b5094 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -21,6 +21,7 @@ properties:
           - mediatek,mt2712-smi-larb
           - mediatek,mt6779-smi-larb
           - mediatek,mt6795-smi-larb
+          - mediatek,mt6893-smi-larb
           - mediatek,mt8167-smi-larb
           - mediatek,mt8173-smi-larb
           - mediatek,mt8183-smi-larb
diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32mp25-omm.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32mp25-omm.yaml
new file mode 100644
index 000000000000..344878db8818
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32mp25-omm.yaml
@@ -0,0 +1,226 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/st,stm32mp25-omm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32 Octo Memory Manager (OMM)
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+description: |
+  The STM32 Octo Memory Manager is a low-level interface that enables an
+  efficient OCTOSPI pin assignment with a full I/O matrix (before alternate
+  function map) and multiplex of single/dual/quad/octal SPI interfaces over
+  the same bus. It Supports up to:
+    - Two single/dual/quad/octal SPI interfaces
+    - Two ports for pin assignment
+
+properties:
+  compatible:
+    const: st,stm32mp25-omm
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    description: |
+      Reflects the memory layout per OSPI instance.
+      Format:
+      <chip-select> 0 <registers base address> <size>
+    minItems: 2
+    maxItems: 2
+
+  reg:
+    items:
+      - description: OMM registers
+      - description: OMM memory map area
+
+  reg-names:
+    items:
+      - const: regs
+      - const: memory_map
+
+  memory-region:
+    description:
+      Memory region shared between the 2 OCTOSPI instance.
+      One or two phandle to a node describing a memory mapped region
+      depending of child number.
+    minItems: 1
+    maxItems: 2
+
+  memory-region-names:
+    description:
+      Identify to which OSPI instance the memory region belongs to.
+    items:
+      enum: [ospi1, ospi2]
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: omm
+      - const: ospi1
+      - const: ospi2
+
+  resets:
+    maxItems: 3
+
+  reset-names:
+    items:
+      - const: omm
+      - const: ospi1
+      - const: ospi2
+
+  access-controllers:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  st,syscfg-amcr:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      The Address Mapping Control Register (AMCR) is used to split the 256MB
+      memory map area shared between the 2 OSPI instance. The Octo Memory
+      Manager sets the AMCR depending of the memory-region configuration.
+      The memory split bitmask description is:
+        - 000: OCTOSPI1 (256 Mbytes), OCTOSPI2 unmapped
+        - 001: OCTOSPI1 (192 Mbytes), OCTOSPI2 (64 Mbytes)
+        - 010: OCTOSPI1 (128 Mbytes), OCTOSPI2 (128 Mbytes)
+        - 011: OCTOSPI1 (64 Mbytes), OCTOSPI2 (192 Mbytes)
+        - 1xx: OCTOSPI1 unmapped, OCTOSPI2 (256 Mbytes)
+    items:
+      - items:
+          - description: phandle to syscfg
+          - description: register offset within syscfg
+          - description: register bitmask for memory split
+
+  st,omm-req2ack-ns:
+    description:
+      In multiplexed mode (MUXEN = 1), this field defines the time in
+      nanoseconds between two transactions.
+    default: 0
+
+  st,omm-cssel-ovr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Configure the chip select selector override for the 2 OCTOSPIs.
+      - 0: OCTOSPI1 chip select send to NCS1 OCTOSPI2 chip select send to NCS1
+      - 1: OCTOSPI1 chip select send to NCS2 OCTOSPI2 chip select send to NCS1
+      - 2: OCTOSPI1 chip select send to NCS1 OCTOSPI2 chip select send to NCS2
+      - 3: OCTOSPI1 chip select send to NCS2 OCTOSPI2 chip select send to NCS2
+    minimum: 0
+    maximum: 3
+    default: 0
+
+  st,omm-mux:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Configure the muxing between the 2 OCTOSPIs busses and the 2 output ports.
+      - 0: direct mode
+      - 1: mux OCTOSPI1 and OCTOSPI2 to port 1
+      - 2: swapped mode
+      - 3: mux OCTOSPI1 and OCTOSPI2 to port 2
+    minimum: 0
+    maximum: 3
+    default: 0
+
+patternProperties:
+  ^spi@[0-9]:
+    type: object
+    $ref: /schemas/spi/st,stm32mp25-ospi.yaml#
+    description: Required spi child node
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - st,syscfg-amcr
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/st,stm32mp25-rcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/st,stm32mp25-rcc.h>
+    ommanager@40500000 {
+      compatible = "st,stm32mp25-omm";
+      reg = <0x40500000 0x400>, <0x60000000 0x10000000>;
+      reg-names = "regs", "memory_map";
+      ranges = <0 0 0x40430000 0x400>,
+               <1 0 0x40440000 0x400>;
+      memory-region = <&mm_ospi1>, <&mm_ospi2>;
+      memory-region-names = "ospi1", "ospi2";
+      pinctrl-0 = <&ospi_port1_clk_pins_a
+                   &ospi_port1_io03_pins_a
+                   &ospi_port1_cs0_pins_a>;
+      pinctrl-1 = <&ospi_port1_clk_sleep_pins_a
+                   &ospi_port1_io03_sleep_pins_a
+                   &ospi_port1_cs0_sleep_pins_a>;
+      pinctrl-names = "default", "sleep";
+      clocks = <&rcc CK_BUS_OSPIIOM>,
+               <&scmi_clk CK_SCMI_OSPI1>,
+               <&scmi_clk CK_SCMI_OSPI2>;
+      clock-names = "omm", "ospi1", "ospi2";
+      resets = <&rcc OSPIIOM_R>,
+               <&scmi_reset RST_SCMI_OSPI1>,
+               <&scmi_reset RST_SCMI_OSPI2>;
+      reset-names = "omm", "ospi1", "ospi2";
+      access-controllers = <&rifsc 111>;
+      power-domains = <&CLUSTER_PD>;
+      #address-cells = <2>;
+      #size-cells = <1>;
+      st,syscfg-amcr = <&syscfg 0x2c00 0x7>;
+      st,omm-req2ack-ns = <0>;
+      st,omm-mux = <0>;
+      st,omm-cssel-ovr = <0>;
+
+      spi@0 {
+        compatible = "st,stm32mp25-ospi";
+        reg = <0 0 0x400>;
+        memory-region = <&mm_ospi1>;
+        interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&hpdma 2 0x62 0x00003121 0x0>,
+               <&hpdma 2 0x42 0x00003112 0x0>;
+        dma-names = "tx", "rx";
+        clocks = <&scmi_clk CK_SCMI_OSPI1>;
+        resets = <&scmi_reset RST_SCMI_OSPI1>, <&scmi_reset RST_SCMI_OSPI1DLL>;
+        access-controllers = <&rifsc 74>;
+        power-domains = <&CLUSTER_PD>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        st,syscfg-dlyb = <&syscfg 0x1000>;
+      };
+
+      spi@1 {
+        compatible = "st,stm32mp25-ospi";
+        reg = <1 0 0x400>;
+        memory-region = <&mm_ospi1>;
+        interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&hpdma 3 0x62 0x00003121 0x0>,
+               <&hpdma 3 0x42 0x00003112 0x0>;
+        dma-names = "tx", "rx";
+        clocks = <&scmi_clk CK_KER_OSPI2>;
+        resets = <&scmi_reset RST_SCMI_OSPI2>, <&scmi_reset RST_SCMI_OSPI1DLL>;
+        access-controllers = <&rifsc 75>;
+        power-domains = <&CLUSTER_PD>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        st,syscfg-dlyb = <&syscfg 0x1000>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
index 7e7225aadae3..14ae3f00ef7e 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
@@ -41,6 +41,7 @@ properties:
           - qcom,sm8450-tcsr
           - qcom,tcsr-apq8064
           - qcom,tcsr-apq8084
+          - qcom,tcsr-ipq5018
           - qcom,tcsr-ipq5332
           - qcom,tcsr-ipq5424
           - qcom,tcsr-ipq6018
diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
index 695ef38a7bb3..150e95c0d9be 100644
--- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
@@ -12,14 +12,20 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - amlogic,meson8b-reset # Reset Controller on Meson8b and compatible SoCs
-      - amlogic,meson-gxbb-reset # Reset Controller on GXBB and compatible SoCs
-      - amlogic,meson-axg-reset # Reset Controller on AXG and compatible SoCs
-      - amlogic,meson-a1-reset # Reset Controller on A1 and compatible SoCs
-      - amlogic,meson-s4-reset # Reset Controller on S4 and compatible SoCs
-      - amlogic,c3-reset # Reset Controller on C3 and compatible SoCs
-      - amlogic,t7-reset
+    oneOf:
+      - enum:
+          - amlogic,meson8b-reset # Reset Controller on Meson8b and compatible SoCs
+          - amlogic,meson-gxbb-reset # Reset Controller on GXBB and compatible SoCs
+          - amlogic,meson-axg-reset # Reset Controller on AXG and compatible SoCs
+          - amlogic,meson-a1-reset # Reset Controller on A1 and compatible SoCs
+          - amlogic,meson-s4-reset # Reset Controller on S4 and compatible SoCs
+          - amlogic,c3-reset # Reset Controller on C3 and compatible SoCs
+          - amlogic,t7-reset
+      - items:
+          - enum:
+              - amlogic,a4-reset
+              - amlogic,a5-reset
+          - const: amlogic,meson-s4-reset
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/reset/renesas,rzv2h-usb2phy-reset.yaml b/Documentation/devicetree/bindings/reset/renesas,rzv2h-usb2phy-reset.yaml
new file mode 100644
index 000000000000..c79f61c2373b
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/renesas,rzv2h-usb2phy-reset.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/renesas,rzv2h-usb2phy-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2H(P) USB2PHY Port reset Control
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+  The RZ/V2H(P) USB2PHY Control mainly controls Port reset and power down of the
+  USB2.0 PHY.
+
+properties:
+  compatible:
+    const: renesas,r9a09g057-usb2phy-reset     # RZ/V2H(P)
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - power-domains
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/renesas,r9a09g057-cpg.h>
+
+    reset-controller@15830000 {
+        compatible = "renesas,r9a09g057-usb2phy-reset";
+        reg = <0x15830000 0x10000>;
+        clocks = <&cpg CPG_MOD 0xb6>;
+        resets = <&cpg 0xaf>;
+        power-domains = <&cpg>;
+        #reset-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/sophgo,sg2042-reset.yaml b/Documentation/devicetree/bindings/reset/sophgo,sg2042-reset.yaml
index 76e1931f0908..1d1b84575960 100644
--- a/Documentation/devicetree/bindings/reset/sophgo,sg2042-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/sophgo,sg2042-reset.yaml
@@ -11,7 +11,12 @@ maintainers:
 
 properties:
   compatible:
-    const: sophgo,sg2042-reset
+    oneOf:
+      - items:
+          - enum:
+              - sophgo,sg2044-reset
+          - const: sophgo,sg2042-reset
+      - const: sophgo,sg2042-reset
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/reset/thead,th1520-reset.yaml b/Documentation/devicetree/bindings/reset/thead,th1520-reset.yaml
new file mode 100644
index 000000000000..f2e91d0add7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/thead,th1520-reset.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/thead,th1520-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: T-HEAD TH1520 SoC Reset Controller
+
+description:
+  The T-HEAD TH1520 reset controller is a hardware block that asserts/deasserts
+  resets for SoC subsystems.
+
+maintainers:
+  - Michal Wilczynski <m.wilczynski@samsung.com>
+
+properties:
+  compatible:
+    enum:
+      - thead,th1520-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      rst: reset-controller@ffef528000 {
+        compatible = "thead,th1520-reset";
+        reg = <0xff 0xef528000 0x0 0x1000>;
+        #reset-cells = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml
index 77c281153010..39d4637c2d08 100644
--- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml
+++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml
@@ -22,6 +22,8 @@ properties:
       - amlogic,meson-axg-clk-measure
       - amlogic,meson-g12a-clk-measure
       - amlogic,meson-sm1-clk-measure
+      - amlogic,c3-clk-measure
+      - amlogic,s4-clk-measure
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/soc/google/google,gs101-pmu-intr-gen.yaml b/Documentation/devicetree/bindings/soc/google/google,gs101-pmu-intr-gen.yaml
new file mode 100644
index 000000000000..2be022ca6a7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/google/google,gs101-pmu-intr-gen.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/google/google,gs101-pmu-intr-gen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google Power Management Unit (PMU) Interrupt Generation
+
+description: |
+  PMU interrupt generator for handshaking between PMU through interrupts.
+
+maintainers:
+  - Peter Griffin <peter.griffin@linaro.org>
+
+properties:
+  compatible:
+    items:
+      - const: google,gs101-pmu-intr-gen
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pmu_intr_gen: syscon@17470000 {
+      compatible = "google,gs101-pmu-intr-gen", "syscon";
+      reg = <0x17470000 0x10000>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt8183-dvfsrc.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt8183-dvfsrc.yaml
index 1ad5b61b249f..4c96d4917967 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt8183-dvfsrc.yaml
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt8183-dvfsrc.yaml
@@ -23,6 +23,7 @@ properties:
   compatible:
     oneOf:
       - enum:
+          - mediatek,mt6893-dvfsrc
           - mediatek,mt8183-dvfsrc
           - mediatek,mt8195-dvfsrc
       - items:
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml
index b00be9e01206..3e8d99cb4dc3 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml
@@ -36,6 +36,13 @@ properties:
       - const: err
       - const: wakeup
 
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ram
+
   qcom,ipc:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
@@ -46,6 +53,14 @@ properties:
     description:
       Three entries specifying the outgoing ipc bit used for signaling the RPM.
 
+  clock-controller:
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,rpmcc
+
 patternProperties:
   "^regulators(-[01])?$":
     type: object
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
index af632d0e0355..036562eb5140 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
@@ -44,7 +44,13 @@ description: |
 
 properties:
   compatible:
-    const: qcom,rpmh-rsc
+    oneOf:
+      - items:
+          - enum:
+              - qcom,sc7180-rpmh-apps-rsc
+              - qcom,sdm845-rpmh-apps-rsc
+          - const: qcom,rpmh-rsc
+      - const: qcom,rpmh-rsc
 
   interrupts:
     minItems: 1
@@ -124,7 +130,21 @@ required:
   - qcom,tcs-offset
   - reg
   - reg-names
-  - power-domains
+
+allOf:
+  # Some platforms may lack a OSI-mode PSCI implementation, which implies the
+  # system power domain can't provide feedback about entering power collapse
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,sc7180-rpmh-apps-rsc
+                - qcom,sdm845-rpmh-apps-rsc
+    then:
+      required:
+        - power-domains
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
index 204da6fe458d..3109df43d502 100644
--- a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
+++ b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
@@ -129,6 +129,11 @@ properties:
     description:
       Node for reboot method
 
+  google,pmu-intr-gen-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU interrupt generation interface.
+
 required:
   - compatible
   - reg
@@ -189,6 +194,16 @@ allOf:
       properties:
         dp-phy: false
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - google,gs101-pmu
+    then:
+      required:
+        - google,pmu-intr-gen-syscon
+
 examples:
   - |
     #include <dt-bindings/clock/exynos5250.h>
diff --git a/Documentation/devicetree/bindings/soc/sophgo/sophgo,cv1800b-rtc.yaml b/Documentation/devicetree/bindings/soc/sophgo/sophgo,cv1800b-rtc.yaml
new file mode 100644
index 000000000000..5cf186c396c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/sophgo/sophgo,cv1800b-rtc.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sophgo/sophgo,cv1800b-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Real Time Clock of the Sophgo CV1800 SoC
+
+description:
+  The RTC (Real Time Clock) is an independently powered module in the chip. It
+  contains a 32KHz oscillator and a Power-On-Reset (POR) sub-module, which can
+  be used for time display and scheduled alarm produce. In addition, the
+  hardware state machine provides triggering and timing control for chip
+  power-on, power-off and reset.
+
+  Furthermore, the 8051 subsystem is located within RTCSYS and is independently
+  powered. System software can use the 8051 to manage wake conditions and wake
+  the system while the system is asleep, and communicate with external devices
+  through peripheral controllers.
+
+  Technical Reference Manual available at
+    https://github.com/sophgo/sophgo-doc/tree/main/SG200X/TRM
+
+maintainers:
+  - sophgo@lists.linux.dev
+
+allOf:
+  - $ref: /schemas/rtc/rtc.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: sophgo,cv1800b-rtc
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: RTC Alarm
+      - description: RTC Longpress
+      - description: VBAT DET
+
+  interrupt-names:
+    items:
+      - const: alarm
+      - const: longpress
+      - const: vbat
+
+  clocks:
+    items:
+      - description: RTC clock source
+      - description: DW8051 MCU clock source
+
+  clock-names:
+    items:
+      - const: rtc
+      - const: mcu
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sophgo,cv1800.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    rtc@5025000 {
+        compatible = "sophgo,cv1800b-rtc", "syscon";
+        reg = <0x5025000 0x2000>;
+        interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+                     <18 IRQ_TYPE_LEVEL_HIGH>,
+                     <19 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "alarm", "longpress", "vbat";
+        clocks = <&clk CLK_RTC_25M>,
+                 <&clk CLK_SRC_RTC_SYS_0>;
+        clock-names = "rtc", "mcu";
+    };