1 files changed, 86 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/clock/qcom,qca8k-nsscc.yaml b/Documentation/devicetree/bindings/clock/qcom,qca8k-nsscc.yaml
new file mode 100644
index 000000000000..61473385da2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,qca8k-nsscc.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qca8k-nsscc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm NSS Clock & Reset Controller on QCA8386/QCA8084
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Luo Jie <quic_luoj@quicinc.com>
+
+description: |
+  Qualcomm NSS clock control module provides the clocks and resets
+  on QCA8386(switch mode)/QCA8084(PHY mode)
+
+  See also::
+    include/dt-bindings/clock/qcom,qca8k-nsscc.h
+    include/dt-bindings/reset/qcom,qca8k-nsscc.h
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,qca8084-nsscc
+      - items:
+          - enum:
+              - qcom,qca8082-nsscc
+              - qcom,qca8085-nsscc
+              - qcom,qca8384-nsscc
+              - qcom,qca8385-nsscc
+              - qcom,qca8386-nsscc
+          - const: qcom,qca8084-nsscc
+
+  clocks:
+    items:
+      - description: Chip reference clock source
+      - description: UNIPHY0 RX 312P5M/125M clock source
+      - description: UNIPHY0 TX 312P5M/125M clock source
+      - description: UNIPHY1 RX 312P5M/125M clock source
+      - description: UNIPHY1 TX 312P5M/125M clock source
+      - description: UNIPHY1 RX 312P5M clock source
+      - description: UNIPHY1 TX 312P5M clock source
+
+  reg:
+    items:
+      - description: MDIO bus address for Clock & Reset Controller register
+
+  reset-gpios:
+    description: GPIO connected to the chip
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - reset-gpios
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    mdio {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      clock-controller@18 {
+        compatible = "qcom,qca8084-nsscc";
+        reg = <0x18>;
+        reset-gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
+        clocks = <&pcs0_pll>,
+                 <&qca8k_uniphy0_rx>,
+                 <&qca8k_uniphy0_tx>,
+                 <&qca8k_uniphy1_rx>,
+                 <&qca8k_uniphy1_tx>,
+                 <&qca8k_uniphy1_rx312p5m>,
+                 <&qca8k_uniphy1_tx312p5m>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+      };
+    };
+...