1 files changed, 0 insertions, 160 deletions
diff --git a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
deleted file mode 100644
index 269b1ae2fca9..000000000000
--- a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
+++ /dev/null
@@ -1,160 +0,0 @@
-Freescale i.MX DRM master device
-================================
-
-The freescale i.MX DRM master device is a virtual device needed to list all
-IPU or other display interface nodes that comprise the graphics subsystem.
-
-Required properties:
-- compatible: Should be "fsl,imx-display-subsystem"
-- ports: Should contain a list of phandles pointing to display interface ports
-  of IPU devices
-
-example:
-
-display-subsystem {
-	compatible = "fsl,imx-display-subsystem";
-	ports = <&ipu_di0>;
-};
-
-
-Freescale i.MX IPUv3
-====================
-
-Required properties:
-- compatible: Should be "fsl,<chip>-ipu" where <chip> is one of
-  - imx51
-  - imx53
-  - imx6q
-  - imx6qp
-- reg: should be register base and length as documented in the
-  datasheet
-- interrupts: Should contain sync interrupt and error interrupt,
-  in this order.
-- resets: phandle pointing to the system reset controller and
-          reset line index, see reset/fsl,imx-src.txt for details
-Additional required properties for fsl,imx6qp-ipu:
-- fsl,prg: phandle to prg node associated with this IPU instance
-Optional properties:
-- port@[0-3]: Port nodes with endpoint definitions as defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt.
-  Ports 0 and 1 should correspond to CSI0 and CSI1,
-  ports 2 and 3 should correspond to DI0 and DI1, respectively.
-
-example:
-
-ipu: ipu@18000000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "fsl,imx53-ipu";
-	reg = <0x18000000 0x080000000>;
-	interrupts = <11 10>;
-	resets = <&src 2>;
-
-	ipu_di0: port@2 {
-		reg = <2>;
-
-		ipu_di0_disp0: endpoint {
-			remote-endpoint = <&display_in>;
-		};
-	};
-};
-
-Freescale i.MX PRE (Prefetch Resolve Engine)
-============================================
-
-Required properties:
-- compatible: should be "fsl,imx6qp-pre"
-- reg: should be register base and length as documented in the
-  datasheet
-- clocks : phandle to the PRE axi clock input, as described
-  in Documentation/devicetree/bindings/clock/clock-bindings.txt and
-  Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
-- clock-names: should be "axi"
-- interrupts: should contain the PRE interrupt
-- fsl,iram: phandle pointing to the mmio-sram device node, that should be
-  used for the PRE SRAM double buffer.
-
-example:
-
-pre@21c8000 {
-	compatible = "fsl,imx6qp-pre";
-	reg = <0x021c8000 0x1000>;
-	interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
-	clocks = <&clks IMX6QDL_CLK_PRE0>;
-	clock-names = "axi";
-	fsl,iram = <&ocram2>;
-};
-
-Freescale i.MX PRG (Prefetch Resolve Gasket)
-============================================
-
-Required properties:
-- compatible: should be "fsl,imx6qp-prg"
-- reg: should be register base and length as documented in the
-  datasheet
-- clocks : phandles to the PRG ipg and axi clock inputs, as described
-  in Documentation/devicetree/bindings/clock/clock-bindings.txt and
-  Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
-- clock-names: should be "ipg" and "axi"
-- fsl,pres: phandles to the PRE units attached to this PRG, with the fixed
-  PRE as the first entry and the muxable PREs following.
-
-example:
-
-prg@21cc000 {
-	compatible = "fsl,imx6qp-prg";
-	reg = <0x021cc000 0x1000>;
-	clocks = <&clks IMX6QDL_CLK_PRG0_APB>,
-		 <&clks IMX6QDL_CLK_PRG0_AXI>;
-	clock-names = "ipg", "axi";
-	fsl,pres = <&pre1>, <&pre2>, <&pre3>;
-};
-
-Parallel display support
-========================
-
-Required properties:
-- compatible: Should be "fsl,imx-parallel-display"
-Optional properties:
-- interface-pix-fmt: How this display is connected to the
-  display interface. Currently supported types: "rgb24", "rgb565", "bgr666"
-  and "lvds666".
-- ddc: phandle describing the i2c bus handling the display data
-  channel
-- port@[0-1]: Port nodes with endpoint definitions as defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt.
-  Port 0 is the input port connected to the IPU display interface,
-  port 1 is the output port connected to a panel.
-
-example:
-
-disp0 {
-	compatible = "fsl,imx-parallel-display";
-	interface-pix-fmt = "rgb24";
-
-	port@0 {
-		reg = <0>;
-
-		display_in: endpoint {
-			remote-endpoint = <&ipu_di0_disp0>;
-		};
-	};
-
-	port@1 {
-		reg = <1>;
-
-		display_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-panel {
-	...
-
-	port {
-		panel_in: endpoint {
-			remote-endpoint = <&display_out>;
-		};
-	};
-};